Bluetooth: A2MP: Process A2MP Create Physlink Request
Placeholder for A2MP Create Physlink Request.
Handles requests with invalid controler id as shown below:
...
> ACL data: handle 11 flags 0x02 dlen 50
A2MP: Create Physical Link req: local id 1 remote id 85
Assoc data:
<skipped>
< ACL data: handle 11 flags 0x00 dlen 15
A2MP: Create Physical Link rsp: local id 85 remote id 1 status 1
Invalid Controller ID
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Process A2MP Get Info Request.
Example of trace log for invalid controller id is shown below:
...
> ACL data: handle 11 flags 0x02 dlen 13
A2MP: Get Info req: id 238
< ACL data: handle 11 flags 0x00 dlen 30
A2MP: Get Info rsp: id 238 status (1) Invalid Controller ID
...
Note that If the Status field is set to Invalid Controller ID all subsequent
fields in the AMP Get Info Response shall be ignored by the receiver.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Adds helper functions to count HCI devs and process A2MP Discover
Request, code makes sure that first controller in the list is
BREDR one. Trace is shown below:
...
> ACL data: handle 11 flags 0x02 dlen 16
A2MP: Discover req: mtu/mps 670 mask: 0x0000
< ACL data: handle 11 flags 0x00 dlen 22
A2MP: Discover rsp: mtu/mps 670 mask: 0x0000
Controller list:
id 0 type 0 (BR-EDR) status 0x01 (Bluetooth only)
id 1 type 1 (802.11 AMP) status 0x01 (Bluetooth only)
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Sasha Levin [Sun, 27 May 2012 20:36:56 +0000 (22:36 +0200)]
Bluetooth: Really fix registering hci with duplicate name
Commit fc50744 ("Bluetooth: Fix registering hci with duplicate name") didn't
fully fix the duplicate naming issue with devices, and duplicate device names
could still be created:
Mat Martineau [Wed, 23 May 2012 21:59:30 +0000 (14:59 -0700)]
Bluetooth: Send a configuration request after security confirmation
Sometimes an ACL link must be raised to a higher security level after
an L2CAP connection is requested, but before a connection response is
sent. In this case, a connection response sent by L2CAP was not
immediately followed by a configuration request. Other code paths do
send this configuration request right away. It was possible for the
connection to stall while L2CAP waited for the remote device (like
PTS) to trigger the configuration process.
Here is an abbreviated hcidump of the failure case with PTS:
Gustavo Padovan [Wed, 23 May 2012 07:04:21 +0000 (04:04 -0300)]
Bluetooth: Fix coding style in the subsystem
This is some leftover from the last patches that fixed style. It is mostly
line over 80 characters fixes reported by checkpatch.pl.
checkpatch.pl is clean for these files now.
Previous callers of l2cap_build_conf_rsp in l2cap_config_req use
flags instead of continuation flag hardcoded value. It does not change
logic and preserve future possible flags.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Szymon Janc [Wed, 23 May 2012 10:35:46 +0000 (12:35 +0200)]
Bluetooth: Rename HCI_QUIRK_NO_RESET to HCI_QUIRK_RESET_ON_CLOSE
HCI_QUIRK_NO_RESET name is misleading - purpose of this quirk is to
reset device on close instead of init, not to not reset at all.
Rename it to HCI_QUIRK_RESET_ON_CLOSE to avoid confusion.
net/bluetooth/l2cap_core.c:1662:24: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:1662:27: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:1683:24: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:1683:27: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:2260:46: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:2574:33: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:2581:33: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:4556:24: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:4556:27: warning: Using plain integer
as NULL pointer
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:53 +0000 (20:53 -0700)]
Bluetooth: Set txwin values for streaming mode
The transmit window values must be configured for streaming mode, even
though streaming mode does not have a window. This enables use of
extended headers when the transmit window socket option is set to 64
or larger.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:49 +0000 (20:53 -0700)]
Bluetooth: Check rules when setting retransmit or monitor timers
The ERTM specification requires the retransmit timer to be cancelled
when the monitor timer is set. The retransmit timer cannot be set
again while the monitor timer is pending.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:47 +0000 (20:53 -0700)]
Bluetooth: Handle incoming REJ frames
REJ frames are sent by the remote device to request that all frames
after a given sequence number be retransmitted. These are also an
implicit indication that the remote device is not in a busy state and
can receive new iframes.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:46 +0000 (20:53 -0700)]
Bluetooth: Handle SREJ requests to resend unacked frames
When a remote device sends an SREJ, retransmit the frame with the
corresponding sequence number (subject to special cases with poll and
final flags). An SREJ is also an implicit indication the the remote
device is not in a busy state.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:45 +0000 (20:53 -0700)]
Bluetooth: Reassemble all available data when retransmissions succeed.
As retransmitted packets arrive, attempt to reassemble SDUs. If all
requested retransmissions have been received, acknowledge them and
transition back to the RECV state.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:44 +0000 (20:53 -0700)]
Bluetooth: Send SREJ frames when packets go missing
The ERTM specification lays out three scenarios for sending SREJ
frames to request retransmission of specific frames. l2cap_send_srej
requests all frames up to a given txseq that are not already queued
for reassembly. l2cap_send_srej_tail only requests the most recent
missing frame. l2cap_send_srej_list resends SREJ frames for data that
was requested for resend but never received.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:43 +0000 (20:53 -0700)]
Bluetooth: Add implementation for retransmitting all unacked frames
This adds l2cap_ertm_resend to retransmit frames based on the sequence
numbers in chan->retrans_list. If the retransmit limit is reached for
any individual frame is reached, the connection is dropped. skbs that
are cloned already are copied to avoid modifying shared data (this is
uncommon). To retransmit all frames, l2cap_retransmit_all now builds
a list of all unacked sequence numbers and then calls
l2cap_ertm_resend.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:42 +0000 (20:53 -0700)]
Bluetooth: Add the ERTM receive state machine
This adds a top-level state machine with handlers for two receive
states defined in the ERTM spec, RECV and SREJ_SENT. The reqseq value
of the incoming frame is also validated at the top level and a
disconnection is forced if it is invalid. The actions for the RECV
and SREJ_SENT states are implemented according to the state tables in
the ERTM specification.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:41 +0000 (20:53 -0700)]
Bluetooth: Update l2cap_send_i_or_rr_or_rnr to fit the spec better
This action now exactly matches what is defined in the ERTM
specification, including clearing the remote busy flag and setting the
retransmit timer rather than retransmitting frames directly. The spec
does not retransmit frames as part of this action, since
retransmission is only triggered by REJ, SREJ, or an RR with the final
bit set. struct l2cap_ctrl is also used to set up header values.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:39 +0000 (20:53 -0700)]
Bluetooth: Refactor l2cap_send_ack
The function now encapsulates more of the logic to either immediately
send an ack if the transmit window is over 75% full, or wait for the
ack timer to expire if the transmit window is not full enough. It is
also able to push out waiting iframes that can carry an
acknowledgement.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:38 +0000 (20:53 -0700)]
Bluetooth: Remove receive code that has been superceded
This deletes the receive code that had handlers for each frame type at
the top level, and then had logic to determine the receive state
within each handler.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:37 +0000 (20:53 -0700)]
Bluetooth: Add streaming mode receive and incoming packet classifier
Streaming mode reception is fairly simple, with in-sequence frames
being reassembled as they arrive. Out-of-sequence frames are dropped,
and also clear any partially-assembled SDUs that may exist.
The packet classifier determines if the txseq value of the incoming
packet is expected, invalid (resulting in a disconnection), invalid
(ignorable), duplicate, or having to do with an SREJ request that was
previously sent. The rules for each classification are defined in the
ERTM specification, and consolidating these rules in one place helps
clarify the receive state machine.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:36 +0000 (20:53 -0700)]
Bluetooth: Consolidate common receive code for ERTM and streaming mode
Creates a new l2cap_data_rcv function that combines previous code from
l2cap_ertm_data_rcv and l2cap_data_channel. This reduces duplicate
code for streaming mode, and sets up a framework for the ERTM receive
state machine.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:35 +0000 (20:53 -0700)]
Bluetooth: Refactor l2cap_send_sframe
The new implementation uses struct l2cap_ctrl to set up the sframe
fields, and also reduces duplicate acks by canceling the ack timer
whenever an RR or RNR frame is sent. sframe PDU generation is also
split in to a separate function to separate it from the logic related
to the connection state and sframe type.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:34 +0000 (20:53 -0700)]
Bluetooth: Refactor l2cap_ertm_send
The new implementation is aware of the new transmit state machine, and
uses struct l2cap_ctrl to compose ERTM headers. It also has improved
error handling for allocation failures, and does not send the packet
until after all skb and channel data structures are updated.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:32 +0000 (20:53 -0700)]
Bluetooth: Add a new L2CAP ERTM transmit state machine.
This implements a top-level transmit state machine with handlers for
the two ERTM states defined in the specification: XMIT and WAIT_F.
The state machine accepts an event and, optionally, a list of skbs to
transmit. In addition to data transmission, the local busy state can
be modified, acks are processed, and monitor and retransmit timeouts
are handled. This mirrors the structure of the state tables in the
spec.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
When L2CAP information was moved to struct l2cap_chan, a check was
added to l2cap_chan_del to avoid certain cleanup operations when ERTM
or streaming mode had not yet been initialized. The logic in the
check did not take in to account that chan->conf_state is set to 0 in
l2cap_chan_ready, so l2cap_chan_del failed to cancel timers and leaked
memory any time the ERTM queues or lists were not empty.
This change makes sure that l2cap_chan_del only returns early if
ERTM initialization was not performed.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Mat Martineau [Thu, 17 May 2012 23:20:14 +0000 (16:20 -0700)]
Bluetooth: Free allocated ERTM SREJ list if init fails
If the ERTM SREJ list is properly allocated but the retransmit list
allocation fails, the SREJ list must be freed before returning from
l2cap_ertm_init. l2cap_chan_del will not clean up the SREJ list
if l2cap_ertm_init returns a failure code.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Linus Torvalds [Sun, 3 Jun 2012 00:39:40 +0000 (17:39 -0700)]
Merge tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Pull device-mapper updates from Alasdair G Kergon:
"Improve multipath's retrying mechanism in some defined circumstances
and provide a simple reserve/release mechanism for userspace tools to
access thin provisioning metadata while the pool is in use."
* tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
dm thin: provide userspace access to pool metadata
dm thin: use slab mempools
dm mpath: allow ioctls to trigger pg init
dm mpath: delay retry of bypassed pg
dm mpath: reduce size of struct multipath
Joe Thornber [Sat, 2 Jun 2012 23:30:01 +0000 (00:30 +0100)]
dm thin: provide userspace access to pool metadata
This patch implements two new messages that can be sent to the thin
pool target allowing it to take a snapshot of the _metadata_. This,
read-only snapshot can be accessed by userland, concurrently with the
live target.
Only one metadata snapshot can be held at a time. The pool's status
line will give the block location for the current msnap.
Since version 0.1.5 of the userland thin provisioning tools, the
thin_dump program displays the msnap as follows:
thin_dump -m <msnap root> <metadata dev>
Available here: https://github.com/jthornber/thin-provisioning-tools
Now that userland can access the metadata we can do various things
that have traditionally been kernel side tasks:
i) Incremental backups.
By using metadata snapshots we can work out what blocks have
changed over time. Combined with data snapshots we can ensure
the data doesn't change while we back it up.
A short proof of concept script can be found here:
Mike Snitzer [Sat, 2 Jun 2012 23:30:00 +0000 (00:30 +0100)]
dm thin: use slab mempools
Use dedicated caches prefixed with a "dm_" name rather than relying on
kmalloc mempools backed by generic slab caches so the memory usage of
thin provisioning (and any leaks) can be accounted for independently.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Sat, 2 Jun 2012 23:29:58 +0000 (00:29 +0100)]
dm mpath: allow ioctls to trigger pg init
After the failure of a group of paths, any alternative paths that
need initialising do not become available until further I/O is sent to
the device. Until this has happened, ioctls return -EAGAIN.
With this patch, new paths are made available in response to an ioctl
too. The processing of the ioctl gets delayed until this has happened.
Instead of returning an error, we submit a work item to kmultipathd
(that will potentially activate the new path) and retry in ten
milliseconds.
Note that the patch doesn't retry an ioctl if the ioctl itself fails due
to a path failure. Such retries should be handled intelligently by the
code that generated the ioctl in the first place, noting that some SCSI
commands should not be retried because they are not idempotent (XOR write
commands). For commands that could be retried, there is a danger that
if the device rejected the SCSI command, the path could be errorneously
marked as failed, and the request would be retried on another path which
might fail too. It can be determined if the failure happens on the
device or on the SCSI controller, but there is no guarantee that all
SCSI drivers set these flags correctly.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Christie [Sat, 2 Jun 2012 23:29:45 +0000 (00:29 +0100)]
dm mpath: delay retry of bypassed pg
If I/O needs retrying and only bypassed priority groups are available,
set the pg_init_delay_retry flag to wait before retrying.
If, for example, the reason for the bypass is that the controller is
getting reset or there is a firmware upgrade happening, retrying right
away would cause a flood of log messages and retries for what could be a
few seconds or even several minutes.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Sat, 2 Jun 2012 23:29:43 +0000 (00:29 +0100)]
dm mpath: reduce size of struct multipath
Move multipath structure's 'lock' and 'queue_size' members to eliminate
two 4-byte holes. Also use a bit within a single unsigned int for each
existing flag (saves 8-bytes). This allows future flags to be added
without each consuming an unsigned int.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
1) Make syn floods consume significantly less resources by
a) Not pre-COW'ing routing metrics for SYN/ACKs
b) Mirroring the device queue mapping of the SYN for the SYN/ACK
reply.
Both from Eric Dumazet.
2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA.
3) Validate the length requested when building a paged SKB for a
socket, so we don't overrun the page vector accidently. From Jason
Wang.
4) When netlabel is disabled, we abort all IP option processing when we
see a CIPSO option. This isn't the right thing to do, we should
simply skip over it and continue processing the remaining options
(if any). Fix from Paul Moore.
5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel
Apfelbaum.
6) 8139cp enables the receiver before the ring address is properly
programmed, which potentially lets the device crap over random
memory. Fix from Jason Wang.
7) e1000/e1000e fixes for i217 RST handling, and an improper buffer
address reference in jumbo RX frame processing from Bruce Allan and
Sebastian Andrzej Siewior, respectively.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
fec_mpc52xx: fix timestamp filtering
mcs7830: Implement link state detection
e1000e: fix Rapid Start Technology support for i217
e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
r8169: call netif_napi_del at errpaths and at driver unload
tcp: reflect SYN queue_mapping into SYNACK packets
tcp: do not create inetpeer on SYNACK message
8139cp/8139too: terminate the eeprom access with the right opmode
8139cp: set ring address before enabling receiver
cipso: handle CIPSO options correctly when NetLabel is disabled
net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
bql: Avoid possible inconsistent calculation.
bql: Avoid unneeded limit decrement.
bql: Fix POSDIFF() to integer overflow aware.
net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP
net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap
net/mlx4_core: Fixes for VF / Guest startup flow
net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event
net/mlx4_core: Fix number of EQs used in ICM initialisation
net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
Linus Torvalds [Sat, 2 Jun 2012 23:17:03 +0000 (16:17 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull straggler x86 fixes from Peter Anvin:
"Three groups of patches:
- EFI boot stub documentation and the ability to print error messages;
- Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which
should never have been ported, and the port is broken and
potentially dangerous.)
- ftrace stack corruption fixes. I'm not super-happy about the
technical implementation, but it is probably the least invasive in
the short term. In the future I would like a single method for
nesting the debug stack, however."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32
x86, efi: Add EFI boot stub documentation
x86, efi; Add EFI boot stub console support
x86, efi: Only close open files in error path
ftrace/x86: Do not change stacks in DEBUG when calling lockdep
x86: Allow nesting of the debug stack IDT setting
x86: Reset the debug_stack update counter
ftrace: Use breakpoint method to update ftrace caller
ftrace: Synchronize variable setting with breakpoints
Linus Torvalds [Sat, 2 Jun 2012 22:21:43 +0000 (15:21 -0700)]
tty: Revert the tty locking series, it needs more work
This reverts the tty layer change to use per-tty locking, because it's
not correct yet, and fixing it will require some more deep surgery.
The main revert is d29f3ef39be4 ("tty_lock: Localise the lock"), but
there are several smaller commits that built upon it, they also get
reverted here. The list of reverted commits is:
fde86d310886 - tty: add lockdep annotations 8f6576ad476b - tty: fix ldisc lock inversion trace d3ca8b64b97e - pty: Fix lock inversion b1d679afd766 - tty: drop the pty lock during hangup abcefe5fc357 - tty/amiserial: Add missing argument for tty_unlock() fd11b42e3598 - cris: fix missing tty arg in wait_event_interruptible_tty call d29f3ef39be4 - tty_lock: Localise the lock
The revert had a trivial conflict in the 68360serial.c staging driver
that got removed in the meantime.
Stephan Gatzka [Sat, 2 Jun 2012 03:04:06 +0000 (03:04 +0000)]
fec_mpc52xx: fix timestamp filtering
skb_defer_rx_timestamp was called with a freshly allocated skb but must
be called with rskb instead.
Signed-off-by: Stephan Gatzka <stephan@gatzka.org> Cc: stable <stable@vger.kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ondrej Zary [Fri, 1 Jun 2012 10:29:08 +0000 (10:29 +0000)]
mcs7830: Implement link state detection
Add .status callback that detects link state changes.
Tested with MCS7832CV-AA chip (9710:7830, identified as rev.C by the driver).
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=28532
Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 2 Jun 2012 16:03:54 +0000 (09:03 -0700)]
Merge 'for-linus' branches from git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs,signal}
Pull vfs fix and a fix from the signal changes for frv from Al Viro.
The __kernel_nlink_t for powerpc got scrogged because 64-bit powerpc
actually depended on the default "unsigned long", while 32-bit powerpc
had an explicit override to "unsigned short". Al didn't notice, and
made both of them be the unsigned short.
The frv signal fix is fallout from simplifying the do_notify_resume()
code, and leaving an extra parenthesis.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
powerpc: Fix size of st_nlink on 64bit
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
frv: Remove bogus closing parenthesis
Anton Blanchard [Sat, 2 Jun 2012 11:34:52 +0000 (21:34 +1000)]
powerpc: Fix size of st_nlink on 64bit
commit e57f93cc53b7 (powerpc: get rid of nlink_t uses, switch to
explicitly-sized type) changed the size of st_nlink on ppc64 from
a long to a short, resulting in boot failures.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Bruce Allan [Thu, 10 May 2012 02:51:17 +0000 (02:51 +0000)]
e1000e: fix Rapid Start Technology support for i217
The definition of I217_PROXY_CTRL must use the BM_PHY_REG() macro instead
of the PHY_REG() macro for PHY page 800 register 70 since it is for a PHY
register greater than the maximum allowed by the latter macro, and fix a
typo setting the I217_MEMPWR register in e1000_suspend_workarounds_ich8lan.
Also for clarity, rename a few defines as bit definitions instead of masks.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
This is another fixup where the data is not transfered into buffer
addressed by skb->data but into a page.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Sat, 2 Jun 2012 02:56:23 +0000 (19:56 -0700)]
Merge branch 'akpm' (Fixups for Andrew's patchbomb)
Merge fixups for the mac NLS tables from Andrew.
* emailed from Andrew Morton, and one cleanup by me:
nls: fix (and rename) mac NLS table files and config options
fs/nls/Makefile: remove bogus CONFIG_ assignments
Linus Torvalds [Sat, 2 Jun 2012 02:51:22 +0000 (19:51 -0700)]
nls: fix (and rename) mac NLS table files and config options
The config options in the Kconfig file (with _CODEPAGE_ in the name)
didn't match the config option name in the Makefile (no _CODEPAGE_).
And both of them were of the hard-to-read MACXYZZY variety, which made
them hard to parse for normal humans: MACROMAN easily reads as "macro
man", not as "Mac Roman".
So rename the options to be consistent, and be NLS_MAC_xyzzy. Rename
the files to be mac-xyzzy.c too, and drop the "nls" part entirely (it's
already in the directory name).
projects / mirror_ubuntu-jammy-kernel.git / log