Fixed various compilation issues and test this driver on omap5 evm.
Signed-off-by: Pradeep Goudagunta <pgoudagunta@nvidia.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Marek Belisko <marek@goldelico.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Teodora Baluta [Thu, 22 Oct 2015 12:44:50 +0000 (15:44 +0300)]
iio: accel: add support for Memsic MXC6255XC sensor
This patch adds a minimal implementation for the Memsic MXC6255XC
orientation sensing accelerometer. The supported operations are reading
raw acceleration values for X/Y axis that can be scaled using the
exposed scale.
Signed-off-by: Teodora Baluta <teodora.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: mma8452: support either of the available interrupt pins
This change is important in order for everyone to be easily able to use the
driver for one of the supported accelerometer chips!
Until now, the driver blindly assumed that the INT1 interrupt line is wired
on a user's board. But these devices have 2 interrupt lines and can route
their interrupt sources to one of them. Now, if "INT2" is found and matches
i2c_client->irq, INT2 will be used.
The chip's default actually is INT2, which is why probably many boards will
have it wired and can make use of this.
Of course, this also falls back to assuming INT1, so for existing users
nothing will break. The new functionality is described in the bindings doc.
Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
For the binding: Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Aaro Koskinen [Sat, 17 Oct 2015 19:28:54 +0000 (22:28 +0300)]
staging: octeon-ethernet: rgmii: poll link status on open
Get the initial link status already on open instead of postponing
it to the periodic poll task. This unifies the behaviour with
other interfaces types.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Sat, 17 Oct 2015 20:33:15 +0000 (15:33 -0500)]
staging: fsl-mc: Added serialization to mc_send_command()
When the same portal is used to call mc_send_command() from two
different threads or a thread and an interrupt handler, serialization
is required, as the MC only supports one outstanding command per MC
portal. Thus, a new command should not be sent to the MC until the
last command sent has been responded by the MC.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Sat, 17 Oct 2015 20:33:14 +0000 (15:33 -0500)]
staging: fsl-mc:Added support for atomic portals
Refactored mc_send_command() to support two flavors of polling:
- preemptible (for non-atomic portals), which was already supported.
It calls usleep_range() between polling iterations.
- non-preemptible (for atomic portals), which is needed when
mc_send_command() is called with interrupts disabled.
It calls udelay() between polling iterations.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Sat, 17 Oct 2015 16:18:21 +0000 (11:18 -0500)]
staging: fsl-mc: refactored error exit in allocator probe/remove
Replaced error gotos with direct returns in fsl_mc_allocator_probe()
and fsl_mc_allocator_remove(), since the only error handling done
in those functions is to exit.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Sat, 17 Oct 2015 16:18:17 +0000 (11:18 -0500)]
staging: fsl-mc: Changed types of flags, portal size in
Changed these two fields from 32-bit integers to 16-bit integers in
struct fsl_mc_io, as 32 bits is too much for these fields. This
change does not affect other components since fsl_mc_io is an opaque
type.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before, we were opening and closing a mc_io's dpmcp object
in fsl_mc_portal_reset(), since that was the only function that was
calling dpmcp MC operations. However, it is better for maintainability
to open the dpmcp object when it gets associated with an mc_io object,
and close it when this association is terminated. This way, we are free
to call dpmcp operations on a mc_io's dpmcp object at any time, without
having to check if the dpmcp object is opened or not.
Consequently, the creation/teardown of the association between
an mc_io object and a dpmcp is now encapsulated in two functions:
fsl_mc_io_set_dpmcp()/fsl_mc_io_unset_dpmcp(). Besides, setting
the corresponding pointers for the association, these functions
open and close the dpmcp object respectively.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Sat, 17 Oct 2015 16:18:14 +0000 (11:18 -0500)]
staging: fsl-mc: fsl_mc_io object refactoring
Each fsl_mc_io object is associated with an fsl_mc_device object
of type "dpmcp" representing the MC portal associated with the
fsl_mc_io object. Before, we were representing this association with
an fsl_mc_resource pointer. To enhance code clarity, it is more
straight forward to use an fsl_mc_device pointer instead.
So, this change replaces the 'resource' field in the fsl_mc_io
object with 'dpmcp_dev'. Also, it changes parameter 'resource' of
fsl_create_mc_io() to be an fsl_mc_device pointer instead.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Staging: lustre: include: Move function prototypes
Functions:
struct obd_export *class_export_get(struct obd_export *exp);
void class_export_put(struct obd_export *exp)
are being used in macros that are converted into static inline
functions, therefore move function prototypes to avoid build
error in later patches.
with struct vnt_options and members
rx_descs0 for nRxDescs0
rx_descs1 for nRxDescs1
tx_descs for nTxDescs
int_works
short_retry
long_retry
bbp_type
flags
ldlm_lock_enqueue() always returns ELDLM_OK, no matter what happens, so
removed the unneeded variable that this value was being stored in and
just return the value itself.
Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
staging: comedi: cb_pcidas: tidy up analog output subdevice init
For aesthetics, add some whitespace to the subdevice initialization
and rename the (*insn_write) functions to follow the normal form
in comedi drivers.
It's not possible to actually read the analog outpus. For convienence
the subdevice readback provided by the core is used to return the
last value written to the subdevice. Remove the SDF_READABLE flag
from the subdev_flags.
Async command support uses interrupts. For clarity, make sure the
driver has an IRQ before initializing command support.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: tidy up 8800 caldac calibration subdevice
For aesthetics, add some whitespace to the subdevice init.
It's not possible to actually read from the caldac. For convienence
the subdevice readback provided by the core is used to return the
last value written to the subdevice. Remove the SDF_READABLE flag
from the subdev_flags.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this function so it has namespace associated with the driver.
Also rename the 'value' parameter to avoid having to split the line
to keep it under 80 chars.
Remove the unnecessary masking on the 'value'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: tidy up dac08 calibration subdevice
For aesthetics, add some whitespace to the subdevice init.
It's not possible to actually read from the dac08. For convienence
the subdevice readback provided by the core is used to return the
last value written to the subdevice. Remove the SDF_READABLE flag
from the subdev_flags.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: tidy up cb_pcidas_trimpot_write()
All the boards supported by this driver have an AD7376 or AD8402
trimpot. Replace the switch () with and if () and remove the
unreachable dev_err() noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor this function to handle the common code used to select the
calibration device (trimpot or caldac) and latch the data after
sending the bitstream.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: tidy up trimpot_8402_write()
Rename this function so it has namespace associated with the driver.
Change the return type to void, it always returns '0' and the return
value is never checked.
For aesthetics, remove the 'static const' local variables. They don't
add any significant value.
Remove the 'bitstream' local variable. The 'value' passed to this
function will always be in the correct range due to s->maxdata so
the masking is not necessary. Change the type of the 'value' param
to match the callers type and write_calibration_bitstream()'s type.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: tidy up trimpot_7376_write()
Rename this function so it has namespace associated with the driver.
Change the return type to void, it always returns '0' and the return
value is never checked.
For aesthetics, remove the 'static const' local variables. They don't
add any significant value.
Remove the 'bitstream' local variable. The 'value' passed to this
function will always be in the correct range due to s->maxdata so
the masking is not necessary. Change the type of the 'value' param
to match the callers type and write_calibration_bitstream()'s type.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: tidy up calibration trimpot subdevice
For aesthetics, add some whitespace to the subdevice init.
It's not possible to actually read from the trimpot. For convienence
the subdevice readback provided by the core is used to return the
last value written to the subdevice. Remove the SDF_READABLE flag
from the subdev_flags.
Move the comment about the channels from trimpot_8402_write() to
the subdevice init and fix the checkpatch.pl issue about:
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the boards, except the 'pci-das1001', use the normal analog input
range table 'cb_pcidas_ranges'. Convert the 'ranges' boardinfo into
a bit-field flag 'use_alt_range' to save a bit of space.
For aesthetics, reword the comments in the boardinfo for the bit-field
members so they align.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: refactor analog output boardinfo
Only some of the boards supported by this driver have analog outputs
but they always have 2 channels. Refactor the 'ao_nchan' member of
the boardinfo into a bit-field flag 'has_ao' to save a bit of space.
Also, convert the 'has_ao_fifo' member into a bit-field flag.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The boards supported by this driver either have 16-bit or 12-bit
analog input/output resolution. For aesthetics, replace the 'ai_bits'
member of the boardinfo with a bit-field flag 'is_16bit'. Also,
change the types of the other bit-field flags to unsigned int.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / mirror_ubuntu-bionic-kernel.git / log