Joel Stanley [Thu, 10 Jun 2021 03:49:57 +0000 (13:19 +0930)]
usb: gadget: fsl: Re-enable driver for ARM SoCs
The commit a390bef7db1f ("usb: gadget: fsl_mxc_udc: Remove the driver")
dropped the ARCH_MXC dependency from USB_FSL_USB2, leaving it depending
solely on FSL_SOC.
FSL_SOC is powerpc only; it was briefly available on ARM in 2014 but was
removed by commit cfd074ad8600 ("ARM: imx: temporarily remove
CONFIG_SOC_FSL from LS1021A"). Therefore the driver can no longer be
enabled on ARM platforms.
This appears to be a mistake as arm64's ARCH_LAYERSCAPE and arm32
SOC_LS1021A SoCs use this symbol. It's enabled in these defconfigs:
Andy Shevchenko [Wed, 9 Jun 2021 17:22:02 +0000 (20:22 +0300)]
usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
As LKP noticed the Sparse is not happy about strict type handling:
.../typec/tcpm/wcove.c:380:50: sparse: expected unsigned short [usertype] header
.../typec/tcpm/wcove.c:380:50: sparse: got restricted __le16 const [usertype] header
Fix this by switching to use pd_header_cnt_le() instead of pd_header_cnt()
in the affected code.
Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together") Fixes: 3c4fb9f16921 ("usb: typec: wcove: start using tcpm for USB PD support") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210609172202.83377-1-andriy.shevchenko@linux.intel.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Yingliang [Sat, 5 Jun 2021 08:09:14 +0000 (16:09 +0800)]
usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Fixes: 517c4c44b323 ("usb: Add driver to allow any GPIO to be used for 7211 USB signals") Cc: stable <stable@vger.kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210605080914.2057758-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.
By adding this validation from the patch we can actually report a wrong
index back to the caller.
In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.
[ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[ 82.966891] Mem abort info:
[ 82.969663] ESR = 0x96000006
[ 82.972703] Exception class = DABT (current EL), IL = 32 bits
[ 82.978603] SET = 0, FnV = 0
[ 82.981642] EA = 0, S1PTW = 0
[ 82.984765] Data abort info:
[ 82.987631] ISV = 0, ISS = 0x00000006
[ 82.991449] CM = 0, WnR = 0
[ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94
Linyu Yuan [Tue, 8 Jun 2021 23:35:47 +0000 (07:35 +0800)]
usb: gadget: eem: fix wrong eem header operation
when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.
Andy Shevchenko [Mon, 7 Jun 2021 20:50:06 +0000 (23:50 +0300)]
usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
devm_ioremap_resource() can return an error, add missed check for it.
Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210607205007.71458-2-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
high-speed (USB2.0 - 480Mbps),
super-speed (USB3.0 - 5Gbps),
super-speed-plus (USB3.1 - 10Gbps).
The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).
However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)
The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.
Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).
usb: fix various gadgets null ptr deref on 10gbps cabling.
This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.
Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus") Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Felipe Balbi <balbi@kernel.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Michael R Sweet <msweet@msweet.org> Cc: Mike Christie <michael.christie@oracle.com> Cc: Pawel Laszczak <pawell@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Cc: Wei Ming Chen <jj251510319013@gmail.com> Cc: Will McVicker <willmcvicker@google.com> Cc: Zqiang <qiang.zhang@windriver.com> Reviewed-By: Lorenzo Colitti <lorenzo@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
The XHCI controller is required to enter D3hot rather than D3cold for AMD
s2idle on this hardware generation.
Otherwise, the 'Controller Not Ready' (CNR) bit is not being cleared by
host in resume and eventually this results in xhci resume failures during
the s2idle wakeup.
usb: f_ncm: only first packet of aggregate needs to start timer
The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.
This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)
As such the first packet is now at most delayed by 300us.
Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.
This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.
Cc: Brooke Basile <brookebasile@gmail.com> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'usb-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus
Peter writes:
Two bug fixes for cdns3 and cdnsp
* tag 'usb-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler
usb: cdns3: Enable TDL_CHK only for OUT ep
Merge tag 'usb-serial-5.13-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Jonah writes:
USB-serial fixes for 5.13-rc5
Here's a fix for some pipe-direction mismatches in the quatech2 driver,
and a couple of new device ids for ftdi_sio and omninet (and a related
trivial cleanup).
All but the ftdi_sio commit have been in linux-next, and with no
reported issues.
* tag 'usb-serial-5.13-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: ftdi_sio: add NovaTech OrionMX product ID
USB: serial: omninet: update driver description
USB: serial: omninet: add device id for Zyxel Omni 56K Plus
USB: serial: quatech2: fix control-request directions
Wesley Cheng [Sat, 22 May 2021 00:44:21 +0000 (17:44 -0700)]
usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind
During unbind, ffs_func_eps_disable() will be executed, resulting in
completion callbacks for any pending USB requests. When using AIO,
irrespective of the completion status, io_data work is queued to
io_completion_wq to evaluate and handle the completed requests. Since
work runs asynchronously to the unbind() routine, there can be a
scenario where the work runs after the USB gadget has been fully
removed, resulting in accessing of a resource which has been already
freed. (i.e. usb_ep_free_request() accessing the USB ep structure)
Explicitly drain the io_completion_wq, instead of relying on the
destroy_workqueue() (in ffs_data_put()) to make sure no pending
completion work items are running.
Li Jun [Wed, 2 Jun 2021 09:57:08 +0000 (17:57 +0800)]
usb: typec: tcpm: cancel frs hrtimer when unregister tcpm port
Like the state_machine_timer, we should also cancel possible pending
frs hrtimer when unregister tcpm port.
Fixes: 8dc4bd073663 ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)") Cc: stable <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1622627829-11070-2-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li Jun [Wed, 2 Jun 2021 09:57:07 +0000 (17:57 +0800)]
usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port
A pending hrtimer may expire after the kthread_worker of tcpm port
is destroyed, see below kernel dump when do module unload, fix it
by cancel the 2 hrtimers.
Kyle Tso [Mon, 31 May 2021 16:49:28 +0000 (00:49 +0800)]
usb: typec: tcpm: Properly handle Alert and Status Messages
When receiving Alert Message, if it is not unexpected but is
unsupported for some reason, the port should return Not_Supported
Message response.
Also, according to PD3.0 Spec 6.5.2.1.4 Event Flags Field, the
OTP/OVP/OCP flags in the Event Flags field in Status Message no longer
require Get_PPS_Status Message to clear them. Thus remove it when
receiving Status Message with those flags being set.
In addition, add the missing AMS operations for Status Message.
Fixes: 64f7c494a3c0 ("typec: tcpm: Add support for sink PPS related messages") Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance") Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210531164928.2368606-1-kyletso@google.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: meson-g12a: Disable the regulator in the error handling path of the probe
If an error occurs after a successful 'regulator_enable()' call,
'regulator_disable()' must be called.
Fix the error handling path of the probe accordingly.
The remove function doesn't need to be fixed, because the
'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
which is called via 'pm_runtime_set_suspended()' in the remove function.
Kyle Tso [Tue, 1 Jun 2021 12:31:51 +0000 (20:31 +0800)]
usb: typec: tcpm: Fix misuses of AMS invocation
tcpm_ams_start is used to initiate an AMS as well as checking Collision
Avoidance conditions but not for flagging passive AMS (initiated by the
port partner). Fix the misuses of tcpm_ams_start in tcpm_pd_svdm.
ATTENTION doesn't need responses so the AMS flag is not needed here.
Kyle Tso [Tue, 1 Jun 2021 12:31:50 +0000 (20:31 +0800)]
usb: typec: tcpm: Introduce snk_vdo_v1 for SVDM version 1.0
The ID Header VDO and Product VDOs defined in USB PD Spec rev 2.0 and
rev 3.1 are quite different. Add an additional array snk_vdo_v1 and
send it as the response to the port partner if it only supports SVDM
version 1.0.
Add the VDO definition for USB PD rev 2.0 in the bindings and define a
new property snk-vdos-v1 containing legacy VDOs as the responses to the
port partner which only supports PD rev 2.0.
Kyle Tso [Tue, 1 Jun 2021 12:31:48 +0000 (20:31 +0800)]
usb: typec: tcpm: Correct the responses in SVDM Version 2.0 DFP
In USB PD Spec Rev 3.1 Ver 1.0, section "6.12.5 Applicability of
Structured VDM Commands", DFP is allowed and recommended to respond to
Discovery Identity with ACK. And in section "6.4.4.2.5.1 Commands other
than Attention", NAK should be returned only when receiving Messages
with invalid fields, Messages in wrong situation, or unrecognize
Messages.
Still keep the original design for SVDM Version 1.0 for backward
compatibilities.
Jack Pham [Sat, 29 May 2021 19:29:32 +0000 (12:29 -0700)]
usb: dwc3: debugfs: Add and remove endpoint dirs dynamically
The DWC3 DebugFS directory and files are currently created once
during probe. This includes creation of subdirectories for each
of the gadget's endpoints. This works fine for peripheral-only
controllers, as dwc3_core_init_mode() calls dwc3_gadget_init()
just prior to calling dwc3_debugfs_init().
However, for dual-role controllers, dwc3_core_init_mode() will
instead call dwc3_drd_init() which is problematic in a few ways.
First, the initial state must be determined, then dwc3_set_mode()
will have to schedule drd_work and by then dwc3_debugfs_init()
could have already been invoked. Even if the initial mode is
peripheral, dwc3_gadget_init() happens after the DebugFS files
are created, and worse so if the initial state is host and the
controller switches to peripheral much later. And secondly,
even if the gadget endpoints' debug entries were successfully
created, if the controller exits peripheral mode, its dwc3_eps
are freed so the debug files would now hold stale references.
So it is best if the DebugFS endpoint entries are created and
removed dynamically at the same time the underlying dwc3_eps are.
Do this by calling dwc3_debugfs_create_endpoint_dir() as each
endpoint is created, and conversely remove the DebugFS entry when
the endpoint is freed.
Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Cc: stable <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210529192932.22912-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kyle Tso [Fri, 28 May 2021 08:16:13 +0000 (16:16 +0800)]
usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms
Current timer PD_T_SINK_WAIT_CAP is set to 240ms which will violate the
SinkWaitCapTimer (tTypeCSinkWaitCap 310 - 620 ms) defined in the PD
Spec if the port is faster enough when running the state machine. Set it
to the lower bound 310ms to ensure the timeout is in Spec.
In commit 92af4fc6ec33 ("usb: musb: Fix suspend with devices
connected for a64"), the logic to support the
MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally
schedule the musb->irq_work delayed work.
This commit badly breaks ECM Gadget on AM335X. Indeed, with this
commit, one can observe massive packet loss:
Reverting this commit brings back a properly functioning ECM
Gadget. An analysis of the commit seems to indicate that a mistake was
made: the previous code was not falling through into the
MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is
taken.
Changing the logic to be as it was before the problematic commit *and*
only conditionally scheduling musb->irq_work resolves the regression:
Jack Pham [Fri, 28 May 2021 16:04:05 +0000 (09:04 -0700)]
usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL
There exists a possible scenario in which dwc3_gadget_init() can fail:
during during host -> peripheral mode switch in dwc3_set_mode(), and
a pending gadget driver fails to bind. Then, if the DRD undergoes
another mode switch from peripheral->host the resulting
dwc3_gadget_exit() will attempt to reference an invalid and dangling
dwc->gadget pointer as well as call dma_free_coherent() on unmapped
DMA pointers.
The exact scenario can be reproduced as follows:
- Start DWC3 in peripheral mode
- Configure ConfigFS gadget with FunctionFS instance (or use g_ffs)
- Run FunctionFS userspace application (open EPs, write descriptors, etc)
- Bind gadget driver to DWC3's UDC
- Switch DWC3 to host mode
=> dwc3_gadget_exit() is called. usb_del_gadget() will put the
ConfigFS driver instance on the gadget_driver_pending_list
- Stop FunctionFS application (closes the ep files)
- Switch DWC3 to peripheral mode
=> dwc3_gadget_init() fails as usb_add_gadget() calls
check_pending_gadget_drivers() and attempts to rebind the UDC
to the ConfigFS gadget but fails with -19 (-ENODEV) because the
FFS instance is not in FFS_ACTIVE state (userspace has not
re-opened and written the descriptors yet, i.e. desc_ready!=0).
- Switch DWC3 back to host mode
=> dwc3_gadget_exit() is called again, but this time dwc->gadget
is invalid.
Although it can be argued that userspace should take responsibility
for ensuring that the FunctionFS application be ready prior to
allowing the composite driver bind to the UDC, failure to do so
should not result in a panic from the kernel driver.
Fix this by setting dwc->gadget to NULL in the failure path of
dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out
unless the gadget pointer is valid.
Wesley Cheng [Fri, 21 May 2021 04:23:57 +0000 (21:23 -0700)]
usb: dwc3: gadget: Disable gadget IRQ during pullup disable
Current sequence utilizes dwc3_gadget_disable_irq() alongside
synchronize_irq() to ensure that no further DWC3 events are generated.
However, the dwc3_gadget_disable_irq() API only disables device
specific events. Endpoint events can still be generated. Briefly
disable the interrupt line, so that the cleanup code can run to
prevent device and endpoint events. (i.e. __dwc3_gadget_stop() and
dwc3_stop_active_transfers() respectively)
Without doing so, it can lead to both the interrupt handler and the
pullup disable routine both writing to the GEVNTCOUNT register, which
will cause an incorrect count being read from future interrupts.
Linus Torvalds [Sun, 30 May 2021 04:24:00 +0000 (18:24 -1000)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"This is a bit larger than usual at rc4 time. The reason is due to
Lee's work of fixing newly reported build warnings.
The rest is fixes as usual"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits)
MAINTAINERS: adjust to removing i2c designware platform data
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
i2c: busses: i2c-st: Fix copy/paste function misnaming issues
i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
i2c: I2C_HISI should depend on ACPI
...
Linus Torvalds [Sun, 30 May 2021 04:16:09 +0000 (18:16 -1000)]
Merge tag 'seccomp-fixes-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This fixes a hard-to-hit race condition in the addfd user_notif
feature of seccomp, visible since v5.9.
And a small documentation fix"
* tag 'seccomp-fixes-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Refactor notification handler to prepare for new semantics
Documentation: seccomp: Fix user notification documentation
Linus Torvalds [Sun, 30 May 2021 03:47:19 +0000 (17:47 -1000)]
Merge tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This week's pile mitigates some decades-old problems in how extent
size hints interact with realtime volumes, fixes some failures in
online shrink, and fixes a problem where directory and symlink
shrinking on extremely fragmented filesystems could fail.
The most user-notable change here is to point users at our (new) IRC
channel on OFTC. Freedom isn't free, it costs folks like you and me;
and if you don't kowtow, they'll expel everyone and take over your
channel. (Ok, ok, that didn't fit the song lyrics...)
Summary:
- Fix a bug where unmapping operations end earlier than expected,
which can cause chaos on multi-block directory and symlink shrink
operations.
- Fix an erroneous assert that can trigger if we try to transition a
bmap structure from btree format to extents format with zero
extents. This was exposed by xfs/538"
* tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: bunmapi has unnecessary AG lock ordering issues
xfs: btree format inode forks can have zero extents
xfs: add new IRC channel to MAINTAINERS
xfs: validate extsz hints against rt extent size when rtinherit is set
xfs: standardize extent size hint validation
xfs: check free AG space when making per-AG reservations
Sargun Dhillon [Mon, 17 May 2021 19:39:06 +0000 (12:39 -0700)]
seccomp: Refactor notification handler to prepare for new semantics
This refactors the user notification code to have a do / while loop around
the completion condition. This has a small change in semantic, in that
previously we ignored addfd calls upon wakeup if the notification had been
responded to, but instead with the new change we check for an outstanding
addfd calls prior to returning to userspace.
Rodrigo Campos also identified a bug that can result in addfd causing
an early return, when the supervisor didn't actually handle the
syscall [1].
Linus Torvalds [Sat, 29 May 2021 16:55:55 +0000 (06:55 -1000)]
Merge tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix uninitialized error code value for the SPMI adc driver (Yang
Yingliang)
- Fix kernel doc warning (Yang Li)
- Fix wrong read-write thermal trip point initialization (Srinivas
Pandruvada)
* tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()
thermal/ti-soc-thermal: Fix kernel-doc
thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID
Linus Torvalds [Sat, 29 May 2021 16:33:28 +0000 (06:33 -1000)]
Merge tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver core / debugfs fixes for 5.13-rc4:
- debugfs fix for incorrect "lockdown" mode for selinux accesses
- two device link changes, one bugfix and one cleanup
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: base: Reduce device link removal code duplication
drivers: base: Fix device link removal
debugfs: fix security_locked_down() call for SELinux
Linus Torvalds [Sat, 29 May 2021 16:29:13 +0000 (06:29 -1000)]
Merge tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO and staging driver fixes for reported issues
for 5.13-rc4.
Nothing major here, tiny changes for reported problems, full details
are in the shortlog if people are curious.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: ad7793: Add missing error code in ad7793_setup()
iio: adc: ad7923: Fix undersized rx buffer.
iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()
iio: dac: ad5770r: Put fwnode in error case during ->probe()
iio: gyro: fxas21002c: balance runtime power in error path
staging: emxx_udc: fix loop in _nbu2ss_nuke()
staging: iio: cdc: ad7746: avoid overwrite of num_channels
iio: adc: ad7192: handle regulator voltage error first
iio: adc: ad7192: Avoid disabling a clock that was never enabled.
iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
Linus Torvalds [Sat, 29 May 2021 16:25:16 +0000 (06:25 -1000)]
Merge tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small fixes for reported problems for tty and serial
drivers for 5.13-rc4.
They consist of:
- 8250 bugfixes and new device support
- lockdown security mode fixup
- syzbot found problems fixed
- 8250_omap fix for interrupt storm
- revert of 8250_omap driver fix as it caused worse problem than the
original issue
All but the last patch have been in linux-next for a while, the last
one is a revert of a problem found in linux-next with the 8250_omap
driver change"
* tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
serial: 8250_pci: handle FL_NOIRQ board flag
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
serial: 8250_pci: Add support for new HPE serial device
serial: 8250: 8250_omap: Fix possible interrupt storm
serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
serial: 8250_dw: Add device HID for new AMD UART controller
serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
serial: core: fix suspicious security_locked_down() call
serial: tegra: Fix a mask operation that is always true
Linus Torvalds [Sat, 29 May 2021 16:11:21 +0000 (06:11 -1000)]
Merge tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of tiny USB and Thunderbolt driver fixes for
5.13-rc4.
They consist of:
- thunderbolt fixes for some NVM bound issues
- xhci fixes for reported problems
- control-request fixups
- documentation build warning fixes
- new usb-serial driver device ids
- typec bugfixes for reported issues
- usbfs warning fixups (could be triggered from userspace)
- other tiny fixes for reported problems.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall
xhci: fix giving back URB with incorrect status regression in 5.12
usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
usb: typec: tcpm: Respond Not_Supported if no snk_vdo
usb: typec: tcpm: Properly interrupt VDM AMS
USB: trancevibrator: fix control-request direction
usb: Restore the usb_header label
usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header
usb: typec: ucsi: Clear pending after acking connector change
usb: typec: mux: Fix matching with typec_altmode_desc
misc/uss720: fix memory leak in uss720_probe
usb: dwc3: gadget: Properly track pending and queued SG
USB: usbfs: Don't WARN about excessively large memory allocations
thunderbolt: usb4: Fix NVM read buffer bounds and offset issue
thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
usb: chipidea: udc: assign interrupt number to USB gadget structure
usb: cdnsp: Fix lack of removing request from pending list.
usb: cdns3: Fix runtime PM imbalance on error
USB: serial: pl2303: add device id for ADLINK ND-6530 GC
USB: serial: ti_usb_3410_5052: add startech.com device id
...
Linus Torvalds [Sat, 29 May 2021 16:02:25 +0000 (06:02 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
Linus Torvalds [Sat, 29 May 2021 15:51:53 +0000 (05:51 -1000)]
Merge tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
"Fix races in vfio-ccw request handling"
* tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Serialize FSM IDLE state with I/O completion
vfio-ccw: Reset FSM state to IDLE inside FSM
vfio-ccw: Check initialized flag in cp_init()
Paolo Bonzini [Fri, 28 May 2021 19:10:58 +0000 (15:10 -0400)]
selftests: kvm: fix overlapping addresses in memslot_perf_test
vm_create allocates memory and maps it close to GPA. This memory
is separate from what is allocated in subsequent calls to
vm_userspace_mem_region_add, so it is incorrect to pass the
test memory size to vm_create_default. Just pass a small
fixed amount of memory which can be used later for page table,
otherwise GPAs are already allocated at MEM_GPA and the
test aborts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 29 May 2021 00:47:48 +0000 (14:47 -1000)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq
scsi: vmw_pvscsi: Set correct residual data length
scsi: bnx2fc: Return failure if io_req is already in ABTS processing
scsi: aic7xxx: Remove multiple definition of globals
scsi: aic7xxx: Restore several defines for aic7xxx firmware build
scsi: target: iblock: Fix smp_processor_id() BUG messages
scsi: libsas: Use _safe() loop in sas_resume_port()
scsi: target: tcmu: Fix xarray RCU warning
scsi: target: core: Avoid smp_processor_id() in preemptible code
Linus Torvalds [Sat, 29 May 2021 00:42:37 +0000 (14:42 -1000)]
Merge tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou
Pu)
- fix false keep-alive timeout when a controller is torn down
(Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)
* tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
nvmet: fix false keep-alive timeout when a controller is torn down
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
md/raid5: remove an incorrect assert in in_chunk_boundary
s390/dasd: add missing discipline function
nvme-fabrics: decode host pathing error for connect
nvme-fc: short-circuit reconnect retries
nvme: fix potential memory leaks in nvme_cdev_add
Linus Torvalds [Sat, 29 May 2021 00:35:55 +0000 (14:35 -1000)]
Merge tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few minor fixes:
- Fix an issue with hashed wait removal on exit (Zqiang, Pavel)
- Fix a recent data race introduced in this series (Marco)"
* tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
io_uring: fix data race to avoid potential NULL-deref
io-wq: Fix UAF when wakeup wqe in hash waitqueue
io_uring/io-wq: close io-wq full-stop gap
* tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm:
drm/ttm: Skip swapout if ttm object is not populated
drm/i915: Reenable LTTPR non-transparent LT mode for DPCD_REV<1.4
drm/meson: fix shutdown crash when component not probed
drm/amdgpu/jpeg3: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn3: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate
drm/amdkfd: correct sienna_cichlid SDMA RLC register offset error
drm/amd/pm: correct MGpuFanBoost setting
Linus Torvalds [Sat, 29 May 2021 00:15:47 +0000 (14:15 -1000)]
Merge tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three SMB3 fixes.
Two for stable, and the other fixes a problem pointed out with a
recently added ioctl"
* tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
cifs: fix string declarations and assignments in tracepoints
cifs: set server->cipher_type to AES-128-CCM for SMB3.0
Linus Torvalds [Fri, 28 May 2021 18:53:19 +0000 (08:53 -1000)]
Merge tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Stable fixes:
- Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
- Fix Oops in xs_tcp_send_request() when transport is disconnected
- Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
Bugfixes:
- Fix instances where signal_pending() should be fatal_signal_pending()
- fix an incorrect limit in filelayout_decode_layout()
- Fixes for the SUNRPC backlogged RPC queue
- Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
- Revert commit 586a0787ce35 ("Clean up rpcrdma_prepare_readch()")"
* tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Remove trailing semicolon in macros
xprtrdma: Revert 586a0787ce35
NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
NFS: Clean up reset of the mirror accounting variables
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
SUNRPC: More fixes for backlog congestion
SUNRPC: Fix Oops in xs_tcp_send_request() when transport is disconnected
NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
SUNRPC in case of backlog, hand free slots directly to waiting task
pNFS/NFSv4: Remove redundant initialization of 'rd_size'
NFS: fix an incorrect limit in filelayout_decode_layout()
fs/nfs: Use fatal_signal_pending instead of signal_pending
Linus Torvalds [Fri, 28 May 2021 18:47:50 +0000 (08:47 -1000)]
Merge tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly high volume at this time due to pending ASoC fixes.
While there are a few generic simple-card fixes for regressions, most
of the changes are device-specific fixes: ASoC Intel SOF, codec
clocks, other codec / platform fixes as well as usual HD-audio and
USB-audio"
* tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340
ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static
ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i
ALSA: hda/realtek: Headphone volume is controlled by Front mixer
ALSA: usb-audio: scarlett2: Improve driver startup messages
ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
ALSA: usb-audio: fix control-request direction
ASoC: qcom: lpass-cpu: Use optional clk APIs
ASoC: cs35l33: fix an error code in probe()
ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware
ASoC: fsl: fix SND_SOC_IMX_RPMSG dependency
ASoC: cs42l52: Minor tidy up of error paths
ASoC: cs35l32: Add missing regmap use_single config
ASoC: cs35l34: Add missing regmap use_single config
ASoC: cs42l73: Add missing regmap use_single config
ASoC: cs53l30: Add missing regmap use_single config
...
- Avoid CFI mismatches by checking initcall_t types (Marco Elver)
* tag 'clang-features-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Makefile: LTO: have linker check -Wframe-larger-than
init: verify that function is initcall_t at compile-time
Linus Torvalds [Fri, 28 May 2021 18:24:13 +0000 (08:24 -1000)]
Merge tag 'mips-fixes_5.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix function/preempt trace hangs
- a few build fixes
* tag 'mips-fixes_5.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER
MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c
MIPS: launch.h: add include guard to prevent build errors
MIPS: alchemy: xxs1500: add gpio-au1000.h header file
Wanpeng Li [Fri, 28 May 2021 00:01:37 +0000 (17:01 -0700)]
KVM: X86: Kill off ctxt->ud
ctxt->ud is consumed only by x86_decode_insn(), we can kill it off by
passing emulation_type to x86_decode_insn() and dropping ctxt->ud
altogether. Tracking that info in ctxt for literally one call is silly.
Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <1622160097-37633-2-git-send-email-wanpengli@tencent.com>
Commit 4a1e10d5b5d8 ("KVM: x86: handle hardware breakpoints during emulation())
adds hardware breakpoints check before emulation the instruction and parts of
emulation context initialization, actually we don't have the EMULTYPE_NO_DECODE flag
here and the emulation context will not be reused. Commit c8848cee74ff ("KVM: x86:
set ctxt->have_exception in x86_decode_insn()) triggers the warning because it
catches the stale emulation context has #UD, however, it is not during instruction
decoding which should result in EMULATION_FAILED. This patch fixes it by moving
the second part emulation context initialization into init_emulate_ctxt() and
before hardware breakpoints check. The ctxt->ud will be dropped by a follow-up
patch.
Yuan Yao [Wed, 26 May 2021 06:38:28 +0000 (14:38 +0800)]
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
The kvm_get_linear_rip() handles x86/long mode cases well and has
better readability, __kvm_set_rflags() also use the paired
function kvm_is_linear_rip() to check the vcpu->arch.singlestep_rip
set in kvm_arch_vcpu_ioctl_set_guest_debug(), so change the
"CS.BASE + RIP" code in kvm_arch_vcpu_ioctl_set_guest_debug() and
handle_exception_nmi() to this one.
Signed-off-by: Yuan Yao <yuan.yao@intel.com>
Message-Id: <20210526063828.1173-1-yuan.yao@linux.intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sargun Dhillon [Mon, 17 May 2021 19:39:05 +0000 (12:39 -0700)]
Documentation: seccomp: Fix user notification documentation
The documentation had some previously incorrect information about how
userspace notifications (and responses) were handled due to a change
from a previously proposed patchset.
Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210517193908.3113-2-sargun@sargun.me
MAINTAINERS: adjust to removing i2c designware platform data
Commit 5a517b5bf687 ("i2c: designware: Get rid of legacy platform data")
removes ./include/linux/platform_data/i2c-designware.h, but misses to
adjust the SYNOPSYS DESIGNWARE I2C DRIVER section in MAINTAINERS.
Tony writes:
I just noticed this causes the following regression in Linux
next when pressing a key on uart console after boot at least on
omap3. This seems to happen on serial_port_in(port, UART_RX) in
the quirk handling.
So let's drop this.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/YLCCJzkkB4N7LTQS@atomide.com Fixes: 31fae7c8b18c ("serial: 8250: 8250_omap: Fix possible interrupt storm") Reported-by: Tony Lindgren <tony@atomide.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: s3c2410: fix possible NULL pointer deref on read message after write
Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained. However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller. At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction". This stop results in clearing the
message queue (i2c->msg = NULL).
The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.
The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
if (!is_msgend(i2c)) {
4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
s3c24xx_i2c_stop(i2c, -EINVAL);
5. Jumping to label retry_write.
goto retry_write;
6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
if (!is_msgend(i2c)) {"
All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning). This seems a reasonable choice also here
since message buffer was entirely emptied.
Addresses-Coverity: Explicit null dereferenced Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Qii Wang [Thu, 27 May 2021 12:04:04 +0000 (20:04 +0800)]
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
The i2c controller driver do dma reset after transfer timeout,
but sometimes dma reset will trigger an unexpected DMA_ERR irq.
It will cause the i2c controller to continuously send interrupts
to the system and cause soft lock-up. So we need to disable i2c
start_en and clear intr_stat to stop i2c controller before dma
reset when transfer timeout.
Fixes: aafced673c06("i2c: mediatek: move dma reset before i2c reset") Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Namhyung Kim [Thu, 27 May 2021 22:00:52 +0000 (15:00 -0700)]
perf stat: Fix error check for bpf_program__attach
It seems the bpf_program__attach() returns a negative error code instead
of a NULL pointer in case of error.
Fixes: 7fac83aaf2ee ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20210527220052.1657578-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Thu, 27 May 2021 22:01:26 +0000 (12:01 -1000)]
Merge branch 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fixes from Dennis Zhou:
"This contains a cleanup to lib/percpu-refcount.c and an update to the
MAINTAINERS file to more formally take over support for lib/percpu*"
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
MAINTAINERS: Add lib/percpu* as part of percpu entry
percpu_ref: Don't opencode percpu_ref_is_dying
Linus Torvalds [Thu, 27 May 2021 21:58:26 +0000 (11:58 -1000)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Don't use contiguous or block mappings for the linear map when KFENCE
is enabled.
- Fix link in the arch_counter_enforce_ordering() comment.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: don't use CON and BLK mapping if KFENCE is enabled
arm64: Fix stale link in the arch_counter_enforce_ordering() comment
- Revert DM snapshot fix from v5.13-rc3 and then properly fix crash
when an origin has no snapshots. This allows only the proper fix to
go to stable@ (since the original fix was successfully dropped).
* tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm snapshot: properly fix a crash when an origin has no snapshots
dm snapshot: revert "fix a crash when an origin has no snapshots"
dm verity: fix require_signatures module_param permissions
Aurelien Aptel [Fri, 21 May 2021 15:19:28 +0000 (17:19 +0200)]
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
Make CIFS_FULL_KEY_DUMP ioctl able to return variable-length keys.
* userspace needs to pass the struct size along with optional
session_id and some space at the end to store keys
* if there is enough space kernel returns keys in the extra space and
sets the length of each key via xyz_key_length fields
This also fixes the build error for get_user() on ARM.
Signed-off-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Jean Delvare [Tue, 25 May 2021 15:03:36 +0000 (17:03 +0200)]
i2c: i801: Don't generate an interrupt on bus reset
Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.
So disable interrupts while trying to reset the bus. Interrupts will
be enabled again for the following transaction.
Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions") Reported-by: syzbot+b4d3fd1dfd53e90afd79@syzkaller.appspotmail.com Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Tue, 11 May 2021 21:20:52 +0000 (09:20 +1200)]
i2c: mpc: implement erratum A-004447 workaround
The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Tue, 11 May 2021 21:20:51 +0000 (09:20 +1200)]
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Tue, 11 May 2021 21:20:50 +0000 (09:20 +1200)]
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Lee Jones [Thu, 20 May 2021 19:01:02 +0000 (20:01 +0100)]
i2c: busses: i2c-st: Fix copy/paste function misnaming issues
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-st.c:531: warning: expecting prototype for st_i2c_handle_write(). Prototype was for st_i2c_handle_read() instead
drivers/i2c/busses/i2c-st.c:566: warning: expecting prototype for st_i2c_isr(). Prototype was for st_i2c_isr_thread() instead
Fix the "enmpty" typo while here.
Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Lee Jones [Thu, 20 May 2021 19:01:00 +0000 (20:01 +0100)]
i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-pnx.c:147: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:147: warning: Excess function parameter 'adap' description in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:202: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:202: warning: Excess function parameter 'adap' description in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:231: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:231: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:301: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_rcv'
drivers/i2c/busses/i2c-pnx.c:301: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_rcv'
Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Lee Jones [Thu, 20 May 2021 19:00:59 +0000 (20:00 +0100)]
i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-ocores.c:253: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:267: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:299: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:347: warning: expecting prototype for It handles an IRQ(). Prototype was for ocores_process_polling() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Lee Jones [Thu, 20 May 2021 19:00:57 +0000 (20:00 +0100)]
i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-eg20t.c:151: warning: bad line: PCH i2c controller
drivers/i2c/busses/i2c-eg20t.c:369: warning: Function parameter or member 'msgs' not described in 'pch_i2c_writebytes'
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_deselect'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_deselect'
Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Linus Torvalds [Thu, 27 May 2021 18:39:05 +0000 (08:39 -1000)]
Merge tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent ACPI power management regression causing boot issues to
occur on some systems due to attempts to turn off ACPI power resources
that are already off (which should work according to the ACPI
specification)"
* tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: power: Refine turning off unused power resources
Linus Torvalds [Thu, 27 May 2021 18:06:36 +0000 (08:06 -1000)]
Merge tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Important fix for the AMD IOMMU driver in the recently added
page-specific invalidation code to fix a calculation.
- Fix a NULL-ptr dereference in the AMD IOMMU driver when a device
switches domain types.
- Fixes for the Intel VT-d driver to check for allocation failure and
do correct cleanup.
- Another fix for Intel VT-d to not allow supervisor page requests from
devices when using second level page translation.
- Add a MODULE_DEVICE_TABLE to the VIRTIO IOMMU driver
* tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix sysfs leak in alloc_iommu()
iommu/vt-d: Use user privilege for RID2PASID translation
iommu/vt-d: Check for allocation failure in aux_detach_device()
iommu/virtio: Add missing MODULE_DEVICE_TABLE
iommu/amd: Fix wrong parentheses on page-specific invalidations
iommu/amd: Clear DMA ops when switching domain
projects / mirror_ubuntu-kernels.git / log