Now that we know that the operation is on a single page,
we need not loop over pages while probing.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Restrict the values of DCZID.BS under TCG
We can simplify our DC_ZVA if we recognize that the largest BS
that we actually use in system mode is 64. Let us just assert
that it fits within TARGET_PAGE_SIZE.
For DC_GVA and STZGM, we want to be able to write whole bytes
of tag memory, so assert that BS is >= 2 * TAG_GRANULE, or 32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Define arm_cpu_do_unaligned_access for user-only
Use the same code as system mode, so that we generate the same
exception + syndrome for the unaligned access.
For the moment, if MTE is enabled so that this path is reachable,
this would generate a SIGSEGV in the user-only cpu_loop. Decoding
the syndrome to produce the proper SIGBUS will be done later.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current Arm ARM has adjusted the official decode of
"Add/subtract (immediate)" so that the shift field is only bit 22,
and bit 23 is part of the op1 field of the parent category
"Data processing - immediate".
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-11-richard.henderson@linaro.org Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cache when MTE is fully enabled, i.e. access to tags are enabled
and tag checks affect the PE. Do this for both the normal context
and the UNPRIV context.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is TFSRE0_EL1, TFSR_EL1, TFSR_EL2, TFSR_EL3,
RGSR_EL1, GCR_EL1, GMID_EL1, and PSTATE.TCO.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an option that writes back the PC, like DISAS_UPDATE_EXIT,
but does not exit back to the main loop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Rename DISAS_UPDATE to DISAS_UPDATE_EXIT
Emphasize that the is_jmp option exits to the main loop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Add support for MTE to HCR_EL2 and SCR_EL3
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This does not attempt to rectify all of the res0 bits, but does
clear the mte bits when not enabled. Since there is no high-part
mapping of SCTLR, aa32 mode cannot write to these bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Protect reads of aa64 id registers with ARM_CP_STATE_AA64.
Use this as a simpler test than arm_el_is_aa64, since EL3
cannot change mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PCA9552 has 16 GPIOs which can be used as input,
output or PWM mode. QEMU models the output GPIO with
the qemu_irq type. Let the device expose the 16 GPIOs
to allow us to later connect LEDs to these outputs.
Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-9-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-7-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/misc/pca9552: Add a 'description' property for debugging purpose
Add a description field to distinguish between multiple devices.
Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/misc/pca9552: Add generic PCA955xClass, parent of TYPE_PCA9552
Extract the code common to the PCA955x family in PCA955xClass,
keeping the PCA9552 specific parts into pca9552_class_init().
Remove the 'TODO' comment added in commit 5141d4158cf.
Suggested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Various code from the PCA9552 device model is generic to the
PCA955X family. We'll split the generic code in a base class
in the next commit. To ease review, first do a dumb renaming.
Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PCA9552 device does not expose LEDs, but simple pins
to connnect LEDs to. To be clearer with the device model,
rename 'nr_leds' as 'pin_count'.
Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AspeedMachineState seems crippled. We use incorrectly 2
different structures to do the same thing. Merge them
altogether:
- Move AspeedMachine fields to AspeedMachineState
- AspeedMachineState is now QOM
- Remove unused AspeedMachine structure
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072132.2868-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/aspeed: Rename AspeedBoardState as AspeedMachineState
To have a more consistent naming, rename AspeedBoardState
as AspeedMachineState.
Suggested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072132.2868-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
memory_region_init_ram_nomigrate(mr, owner, name, size, &err);
if (err) {
error_propagate(errp, err);
return;
}
/* This will assert if owner is neither NULL nor a DeviceState.
* We only want the owner here for the purposes of defining a
* unique name for migration. TODO: Ideally we should implement
* a naming scheme for Objects which are not DeviceStates, in
* which case we can relax this restriction.
*/
owner_dev = DEVICE(owner);
vmstate_register_ram(mr, owner_dev);
}
The expected assertion is not triggered ('bmc' is not NULL neither
a DeviceState).
The 'soc' object is indeed a DeviceState, so the assertion passes.
Since this is fragile and only happens to work by luck, remove the
dangerous OBJECT(bmc) owner argument.
Note, this probably breaks migration for this machine.
Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200623072132.2868-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 26 Jun 2020 11:14:18 +0000 (12:14 +0100)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-macppc-20200626' into staging
qemu-macppc patches
# gpg: Signature made Fri 26 Jun 2020 10:15:36 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-macppc-20200626: (22 commits)
adb: add ADB bus trace events
adb: use adb_device prefix for ADB device trace events
adb: only call autopoll callbacks when autopoll is not blocked
mac_via: rework ADB state machine to be compatible with both MacOS and Linux
mac_via: move VIA1 portB write logic into mos6522_q800_via1_write()
pmu: add adb_autopoll_block() and adb_autopoll_unblock() functions
cuda: add adb_autopoll_block() and adb_autopoll_unblock() functions
adb: add autopoll_blocked variable to block autopoll
adb: use adb_request() only for explicit requests
adb: add status field for holding information about the last ADB request
adb: keep track of devices with pending data
adb: introduce new ADBDeviceHasData method to ADBDeviceClass
mac_via: convert to use ADBBusState internal autopoll variables
pmu: convert to use ADBBusState internal autopoll variables
cuda: convert to use ADBBusState internal autopoll variables
adb: create autopoll variables directly within ADBBusState
adb: introduce realize/unrealize and VMStateDescription for ADB bus
pmu: honour autopoll_rate_ms when rearming the ADB autopoll timer
pmu: fix duplicate autopoll mask variable
cuda: convert ADB autopoll timer from ns to ms
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark Cave-Ayland [Tue, 23 Jun 2020 20:49:33 +0000 (21:49 +0100)]
mac_via: rework ADB state machine to be compatible with both MacOS and Linux
The existing ADB state machine is designed to work with Linux which has a different
interpretation of the state machine detailed in "Guide to the Macintosh Family
Hardware". In particular the current Linux implementation includes an extra change
to IDLE state when switching the VIA between send and receive modes which does not
occur in MacOS, and omitting this transition causes the current mac_via ADB state
machine to fail.
Rework the ADB state machine accordingly so that it can enumerate and autopoll the
ADB under both Linux and MacOS, including the addition of the new adb_autopoll_block()
and adb_autopoll_unblock() functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-20-mark.cave-ayland@ilande.co.uk>
Mark Cave-Ayland [Tue, 23 Jun 2020 20:49:32 +0000 (21:49 +0100)]
mac_via: move VIA1 portB write logic into mos6522_q800_via1_write()
Currently the logic is split between the mos6522 portB_write() callback and
the memory region used to capture the VIA1 MMIO accesses. Move everything
into the latter mos6522_q800_via1_write() function to keep all the logic in
one place to make it easier to follow.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-19-mark.cave-ayland@ilande.co.uk>
Mark Cave-Ayland [Tue, 23 Jun 2020 20:49:29 +0000 (21:49 +0100)]
adb: add autopoll_blocked variable to block autopoll
Whilst autopoll is enabled it is necessary to prevent the ADB buffer contents
from being overwritten until the host has read back the response in its
entirety.
Add adb_autopoll_block() and adb_autopoll_unblock() functions in preparation
for ensuring that the ADB buffer contents are protected for explicit ADB
requests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-16-mark.cave-ayland@ilande.co.uk>
Mark Cave-Ayland [Tue, 23 Jun 2020 20:49:27 +0000 (21:49 +0100)]
adb: add status field for holding information about the last ADB request
Currently only 2 bits are defined: one to indicate if the request timed out (no
reply) and another to indicate whether the request was the result of an autopoll
operation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-14-mark.cave-ayland@ilande.co.uk>
Mark Cave-Ayland [Tue, 23 Jun 2020 20:49:26 +0000 (21:49 +0100)]
adb: keep track of devices with pending data
Add a new pending variable to ADBBusState which is a bitmask indicating which
ADB devices have data to send. Update the bitmask every time that an ADB
request is executed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-13-mark.cave-ayland@ilande.co.uk>
Mark Cave-Ayland [Tue, 23 Jun 2020 20:49:21 +0000 (21:49 +0100)]
adb: create autopoll variables directly within ADBBusState
Rather than each ADB implementation requiring its own functions to manage
autopoll state, timers, and autopoll masks prepare to move this information
directly into ADBBusState.
Add external functions within adb.h to allow each ADB implementation to
manage the new autopoll variables.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-8-mark.cave-ayland@ilande.co.uk>
Mark Cave-Ayland [Tue, 23 Jun 2020 20:49:16 +0000 (21:49 +0100)]
adb: fix adb-mouse read length and revert disable-reg3-direct-writes workaround
Commit 84051eb400 "adb: add property to disable direct reg 3 writes" introduced
a workaround for spurious writes to ADB register 3 when MacOS 9 enables
autopoll on the mouse device. Further analysis shows that the problem is that
only a partial request is sent, and since the len parameter is ignored then
stale data from the previous request is used causing the incorrect address
assignment.
Remove the disable-reg3-direct-writes workaround and instead check the length
parameter when the write is attempted, discarding the invalid request.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-3-mark.cave-ayland@ilande.co.uk>
Peter Maydell [Fri, 26 Jun 2020 08:30:29 +0000 (09:30 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200626' into staging
ppc patch queue 2020-06-26
Here's another pull request for qemu-5.1. Not very much in this one,
just a handful of assorted minor fixes and cleanups.
I'm about to go on holiday for a couple of weeks, so this will be my
last PR before the freeze, and maybe the last for 5.1 at all. If
there's some super important fix we need, Greg Kurz will handle it.
Greg Kurz [Mon, 22 Jun 2020 06:57:18 +0000 (08:57 +0200)]
ppc/pnv: Silence missing BMC warning with qtest
The device introspect test in qtest emits some warnings with the
the pnv machine types during the "nodefaults" phase:
TEST check-qtest-ppc64: tests/qtest/device-introspect-test
qemu-system-ppc64: warning: machine has no BMC device. Use '-device
ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0,irq=10' to define
one
qemu-system-ppc64: warning: machine has no BMC device. Use '-device
ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0,irq=10' to define
one
qemu-system-ppc64: warning: machine has no BMC device. Use '-device
ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0,irq=10' to define
one
This is expected since the pnv machine doesn't create the internal
BMC simulator fallback when "-nodefaults" is passed on the command
line, but these warnings appear in ci logs and confuse people.
Not having a BMC isn't recommended but it is still a supported
configuration, so a straightforward fix is to just silent this
warning when qtest is enabled.
Fixes: 25f3170b0654 ("ppc/pnv: Create BMC devices only when defaults are enabled") Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159280903824.485572.831378159272329707.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Peter Maydell [Thu, 25 Jun 2020 20:20:44 +0000 (21:20 +0100)]
Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging
target/xtensa fixes for 5.1:
- fix access to special registers missing in the core configuration;
- fix simcall opcode behavior for new hardware;
- drop gen_io_end call from xtensa translator.
* remotes/xtensa/tags/20200625-xtensa:
target/xtensa: drop gen_io_end call
target/xtensa: fix simcall for newer hardware
target/xtensa: fetch HW version from configuration overlay
target/xtensa: work around missing SR definitions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 25 Jun 2020 15:52:42 +0000 (16:52 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,acpi,pci: fixes, cleanups.
Fixes, cleanups in ACPI, PCI, virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 25 Jun 2020 07:48:47 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Rename use_acpi_pci_hotplug to more appropriate use_acpi_hotplug_bridge
Stop vhost-user sending uninitialized mmap_offsets
docs/specs/tpm: ACPI boot now supported for TPM/ARM
arm/acpi: Add the TPM2.0 device under the DSDT
acpi: Some build_tpm2() code reshape
tests/acpi: update expected data files
acpi: q35: drop _SB.PCI0.ISA.LPCD opregion.
acpi: drop build_piix4_pm()
acpi: drop serial/parallel enable bits from dsdt
acpi: simplify build_isa_devices_aml()
acpi: factor out fw_cfg_add_acpi_dsdt()
acpi: move aml builder code for i8042 (kbd+mouse) device
floppy: move cmos_get_fd_drive_type() from pc
floppy: make isa_fdc_get_drive_max_chs static
acpi: move aml builder code for floppy device
acpi: bios-tables-test: show more context on asl diffs
qtest: allow DSDT acpi table changes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 25 Jun 2020 08:34:52 +0000 (09:34 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-qdev-2020-06-23' into staging
Qdev patches for 2020-06-23
# gpg: Signature made Tue 23 Jun 2020 15:08:28 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qdev-2020-06-23:
sd/milkymist-memcard: Fix error API violation
sd/pxa2xx_mmci: Don't crash on pxa2xx_mmci_init() error
arm/aspeed: Drop aspeed_board_init_flashes() parameter @errp
qdev: Make qdev_prop_set_drive() match the other helpers
qdev: Reject chardev property override
qdev: Reject drive property override
qdev: Improve netdev property override error a bit
qdev: Eliminate get_pointer(), set_pointer()
blockdev: Deprecate -drive with bogus interface type
docs/qdev-device-use.txt: Update section "Default Devices"
fdc: Deprecate configuring floppies with -global isa-fdc
fdc: Open-code fdctrl_init_isa()
fdc: Reject clash between -drive if=floppy and -global isa-fdc
iotests/172: Cover -global floppy.drive=...
iotests/172: Cover empty filename and multiple use of drives
iotests/172: Include "info block" in test output
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ani Sinha [Tue, 16 Jun 2020 12:31:39 +0000 (12:31 +0000)]
Rename use_acpi_pci_hotplug to more appropriate use_acpi_hotplug_bridge
Currently, the option use_acpi_pci_hotplug is being used to control device
hotplug capability using ACPI for slots of cold plugged bridges. Hence, we
are renaming this option to better reflect what it actually does.
Signed-off-by: Ani Sinha <ani.sinha@nutanix.com>
Message-Id: <1592310699-58916-1-git-send-email-ani.sinha@nutanix.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Ani Sinha <ani.sinha@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prior to this change, the vhost_user_fill_msg_region function filled out
all elements of the VhostUserMemoryRegion struct except the mmap_offset.
This function is often called on uninitialized structs, which are then
copied into VHOST_USER_SET_MEM_TABLE and VHOST_USER_ADD/REM_MEM_REG
messages. In some cases, where the mmap_offset was not needed, it was
left uninitialized, causing QEMU to send the backend uninitialized data,
which Coverity flagged as a series of issues.
This change augments the vhost_user_fill_msg_region API, adding a
mmap_offset paramenter, forcing the caller to initialize mmap_offset.
Fixes: ece99091c2d0aeb23734289a50ef2ff4e0a08929 Fixes: f1aeb14b0809e313c74244d838645ed25e85ea63 Reported-by: Coverity (CIDs 1429802, 1429803 and 1429804) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1592650156-25845-1-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Eric Auger [Mon, 22 Jun 2020 14:06:20 +0000 (16:06 +0200)]
docs/specs/tpm: ACPI boot now supported for TPM/ARM
ACPI boot now is supported. Let's remove the comment
saying it is not.
Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622140620.17229-4-eric.auger@redhat.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eric Auger [Mon, 22 Jun 2020 14:06:19 +0000 (16:06 +0200)]
arm/acpi: Add the TPM2.0 device under the DSDT
In case it is dynamically instantiated, add the TPM 2.0 device object
under the DSDT table in the ACPI namespace. Its HID is MSFT0101
while its current resource settings (CRS) property is initialized
with the guest physical address and MMIO size of the device.
Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622140620.17229-3-eric.auger@redhat.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eric Auger [Mon, 22 Jun 2020 14:06:18 +0000 (16:06 +0200)]
acpi: Some build_tpm2() code reshape
Remove any reference to Acpi20TPM2 and adopt an implementation
similar to build_ghes_v2().
Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622140620.17229-2-eric.auger@redhat.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gerd Hoffmann [Fri, 19 Jun 2020 09:19:05 +0000 (11:19 +0200)]
tests/acpi: update expected data files
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200619091905.21676-13-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-12-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedow <imammedo@redhat.com>
Message-Id: <20200619091905.21676-11-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-10-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gerd Hoffmann [Fri, 19 Jun 2020 09:19:01 +0000 (11:19 +0200)]
acpi: simplify build_isa_devices_aml()
x86 machines can have a single ISA bus only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200619091905.21676-9-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gerd Hoffmann [Fri, 19 Jun 2020 09:19:00 +0000 (11:19 +0200)]
acpi: factor out fw_cfg_add_acpi_dsdt()
Add helper function to add fw_cfg device,
also move code to hw/i386/fw_cfg.c.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-8-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gerd Hoffmann [Fri, 19 Jun 2020 09:18:59 +0000 (11:18 +0200)]
acpi: move aml builder code for i8042 (kbd+mouse) device
DSDT change: isa device order changes in case MI1 (ipmi) is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-7-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gerd Hoffmann [Fri, 19 Jun 2020 09:18:58 +0000 (11:18 +0200)]
floppy: move cmos_get_fd_drive_type() from pc
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20200619091905.21676-6-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gerd Hoffmann [Fri, 19 Jun 2020 09:18:57 +0000 (11:18 +0200)]
floppy: make isa_fdc_get_drive_max_chs static
acpi aml generator needs this, but it is in floppy code now
so we can make the function static.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20200619091905.21676-5-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gerd Hoffmann [Fri, 19 Jun 2020 09:18:56 +0000 (11:18 +0200)]
acpi: move aml builder code for floppy device
DSDT change: isa device order changes in case MI1 (ipmi) is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-4-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gerd Hoffmann [Fri, 19 Jun 2020 09:18:55 +0000 (11:18 +0200)]
acpi: bios-tables-test: show more context on asl diffs
Makes it easier to create good commit messages from the logs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200619091905.21676-3-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gerd Hoffmann [Fri, 19 Jun 2020 09:18:54 +0000 (11:18 +0200)]
qtest: allow DSDT acpi table changes
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200619091905.21676-2-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Wed, 24 Jun 2020 20:19:53 +0000 (21:19 +0100)]
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-06-23-1' into staging
Merge tpm 2020/06/23 v1
# gpg: Signature made Tue 23 Jun 2020 12:35:03 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-06-23-1:
tpm: Move backend code under the 'backends/' directory
hw/tpm: Make 'tpm_util.h' publicly accessible as "sysemu/tpm_util.h"
hw/tpm: Move DEFINE_PROP_TPMBE() macro to 'tmp_prop.h' local header
hw/tpm: Move few declarations from 'tpm_util.h' to 'tpm_int.h'
hw/tpm: Make TRACE_TPM_UTIL_SHOW_BUFFER check local to tpm_util.c
hw/tpm: Remove unnecessary 'tpm_int.h' header inclusion
hw/tpm: Move 'hw/acpi/tpm.h' inclusion from header to sources
hw/tpm: Include missing 'qemu/option.h' header
hw/tpm: Do not include 'qemu/osdep.h' in header
hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig
backends: Add TPM files into their own directory
docs/specs/tpm: Correct header path name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
st_set_trace_file() accidentally enables tracing. It's called
unconditionally during startup, which is why QEMU built with the
simple trace backend always writes a trace file "trace-$PID".
This has been broken for quite a while. I didn't track down the exact
commit.
Fix st_set_trace_file() to restore the state.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200527065613.25322-1-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is an effort in progress to generate a QEMU Python
package. As I'm not sure this old email is still valid,
update it to not produce package with broken maintainer
email.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200511082816.696-1-philmd@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Tue, 23 Jun 2020 17:57:05 +0000 (18:57 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200623' into staging
target-arm queue:
* util/oslib-posix : qemu_init_exec_dir implementation for Mac
* target/arm: Last parts of neon decodetree conversion
* hw/arm/virt: Add 5.0 HW compat props
* hw/watchdog/cmsdk-apb-watchdog: Add trace event for lock status
* mps2: Add CMSDK APB watchdog, FPGAIO block, S2I devices and I2C devices
* mps2: Add some unimplemented-device stubs for audio and GPIO
* mps2-tz: Use the ARM SBCon two-wire serial bus interface
* target/arm: Check supported KVM features globally (not per vCPU)
* tests/qtest/arm-cpu-features: Add feature setting tests
* arm/virt: Add memory hot remove support
* remotes/pmaydell/tags/pull-target-arm-20200623: (42 commits)
arm/virt: Add memory hot remove support
tests/qtest/arm-cpu-features: Add feature setting tests
target/arm: Check supported KVM features globally (not per vCPU)
hw/arm/mps2-tz: Use the ARM SBCon two-wire serial bus interface
hw/arm/mps2: Add audio I2S interface as unimplemented device
hw/arm/mps2: Add I2C devices
hw/arm/mps2: Add SPI devices
hw/arm/mps2: Map the FPGA I/O block
hw/arm/mps2: Add CMSDK AHB GPIO peripherals as unimplemented devices
hw/arm/mps2: Add CMSDK APB watchdog device
hw/arm/mps2: Rename CMSDK AHB peripheral region
hw/arm/mps2: Document CMSDK/FPGA APB subsystem sections
hw/arm: Use TYPE_VERSATILE_I2C instead of hardcoded string
hw/i2c: Add header for ARM SBCon two-wire serial bus interface
hw/i2c/versatile_i2c: Add SCL/SDA definitions
hw/i2c/versatile_i2c: Add definitions for register addresses
hw/watchdog/cmsdk-apb-watchdog: Add trace event for lock status
target/arm: Remove dead code relating to SABA and UABA
target/arm: Remove unnecessary gen_io_end() calls
target/arm: Move some functions used only in translate-neon.inc.c to that file
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
milkymist_memcard_realize() is wrong that way: it passes &err to
qdev_prop_set_drive_err() and qdev_realize_and_unref(). Currently
harmless, because the latter uses it only as first argument of
error_propagate().
Making qdev_prop_set_drive_err() fail involves abuse of -global.
Leave handling that to qdev_prop_set_drive(), like we do elsewhere.
Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-17-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
sd/pxa2xx_mmci: Don't crash on pxa2xx_mmci_init() error
On error, pxa2xx_mmci_init() reports to stderr and returns NULL.
Callers don't check for errors. Machines akita, borzoi, mainstone,
spitz, terrier, tosa, and z2 crash shortly after, like this:
$ qemu-system-aarch64 -M akita -drive if=sd,readonly=on
qemu-system-aarch64: failed to init SD card: Cannot use read-only drive as SD card
Segmentation fault (core dumped)
Machines connex and verdex reach the check for orphaned drives first:
$ aarch64-softmmu/qemu-system-aarch64 -M connex -drive if=sd,readonly=on -accel qtest
qemu-system-aarch64: failed to init SD card: Cannot use read-only drive as SD card
qemu-system-aarch64: -drive if=sd,readonly=on: machine type does not support if=sd,bus=0,unit=0
Make pxa2xx_mmci_init() fail cleanly right away.
Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-16-armbru@redhat.com>
arm/aspeed: Drop aspeed_board_init_flashes() parameter @errp
We always pass &error_abort. Drop the parameter, use &error_abort
directly.
Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-15-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
qdev_prop_set_chr() screws up when the property already has a non-null
value: it neglects to release the old value. Both the old and the new
backend become attached to the same device. Unlike for block devices
(see previous commit), this can't be observed from the monitor (I
think).
Special case: attempting to use the same backend both times crashes:
$ qemu-system-x86_64 --nodefaults -serial null -global isa-serial.chardev=serial0
Unexpected error in qemu_chr_fe_init() at /work/armbru/qemu/chardev/char-fe.c:220:
qemu-system-x86_64: Device 'serial0' is in use
Aborted (core dumped)
Yet another example: -device with multiple chardev=... (but not
device_add, which silently drops all but the last duplicate property).
Perhaps chardev property override could be made to work. Perhaps it
should. I can't afford the time to figure this out now. What I can
do reject usage that leaves backends in unhealthy states. For what
it's worth, we've long done the same for netdev properties.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-13-armbru@redhat.com>
qdev_prop_set_drive() screws up when the property already has a
non-null value: it neglects to release the old value. Both the old
and the new backend become attached to the same device.
Example (taken from iotest 172): -fda ... -drive if=none,... -global
floppy.drive=none0.
Special case: attempting to use the same backend both times fails.
Example (also from iotest 172): -fda ... -global floppy.drive=floppy0.
Yet another example: -device with multiple drive=... (but not
device_add, which silently drops all but the last duplicate property).
Perhaps drive property override could be made to work. Perhaps it
should. I can't afford the time to figure this out now. What I can
do is reject usage that leaves backends in unhealthy states. For what
it's worth, we've long done the same for netdev properties.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-12-armbru@redhat.com>
qdev: Improve netdev property override error a bit
qdev_prop_set_netdev() fails when the property already has a non-null
value. Seems to go back to commit 30c367ed44
"qdev-properties-system.c: Allow vlan or netdev for -device, not
both", v1.7.0. Board code doesn't expect failure, and crashes:
$ qemu-system-x86_64 --nodefaults -nic user -netdev user,id=nic0 -global e1000.netdev=nic0
Unexpected error in error_set_from_qdev_prop_error() at /work/armbru/qemu/hw/core/qdev-properties.c:1101:
qemu-system-x86_64: Property 'e1000.netdev' doesn't take value '__org.qemu.nic0
'
Aborted (core dumped)
-device and device_add handle the failure:
$ qemu-system-x86_64 -nodefaults -netdev user,id=net0 -netdev user,id=net1 -device e1000,netdev=net0,netdev=net1
qemu-system-x86_64: -device e1000,netdev=net0,netdev=net1: Property 'e1000.netdev' doesn't take value 'net1'
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -netdev user,id=net0 -netdev user,id=net1 -global e1000.netdev=net0
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) qemu-system-x86_64: warning: netdev net0 has no peer
qemu-system-x86_64: warning: netdev net1 has no peer
device_add e1000,netdev=net1
Error: Property 'e1000.netdev' doesn't take value 'net1'
Perhaps netdev property override could be made to work. Perhaps it
should. I'm not the right guy to figure this out. What I can do is
improve the error message a bit:
(qemu) device_add e1000,netdev=net1
Error: -global e1000.netdev=... conflicts with netdev=net1
Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-11-armbru@redhat.com>
We stopped using get_pointer() and set_pointer() for netdev in commit 23120b13c6 "net: don't use set/get_pointer() in set/get_netdev()"
(v2.3.0), and for chardev in commit becdfa00cf "char: replace PROP_CHR
with CharBackend" (v2.8.0). With only the drive user left, they're
not helpful anymore. Eliminate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-10-armbru@redhat.com>
blockdev: Deprecate -drive with bogus interface type
Drives with interface types other than if=none are for onboard
devices. Unfortunately, any such drives the board doesn't pick up can
still be used with -device, like this:
$ qemu-system-x86_64 -nodefaults -display none -S -drive if=floppy,id=bogus,unit=7 -device ide-cd,drive=bogus -monitor stdio
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) info block
bogus: [not inserted]
Attached to: /machine/peripheral-anon/device[0]
Removable device: not locked, tray closed
(qemu) info qtree
bus: main-system-bus
type System
[...]
bus: ide.1
type IDE
dev: ide-cd, id ""
---> drive = "bogus"
[...]
unit = 0 (0x0)
[...]
This kind of abuse has always worked. Deprecate it:
qemu-system-x86_64: -drive if=floppy,id=bogus,unit=7: warning: bogus if=floppy is deprecated, use if=none
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-9-armbru@redhat.com>
Helper function fdctrl_init_isa() is less than helpful: one of three
places creating "isa-fdc" devices use it. Open-code it there, and
drop the function.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-6-armbru@redhat.com>
fdc: Reject clash between -drive if=floppy and -global isa-fdc
The floppy controller devices desugar their drive properties into
floppy devices (since commit a92bd191a4 "fdc: Move qdev properties to
FloppyDrive", v2.8.0). This involves some bad magic in
fdctrl_connect_drives(), and exists for backward compatibility.
The functions for boards to create floppy controller devices
fdctrl_init_isa(), fdctrl_init_sysbus(), and sun4m_fdctrl_init()
desugar -drive if=floppy to these floppy controller drive properties.
If you use both -drive if=floppy (or its -fda / -fdb sugar) and
-global isa-fdc for the same floppy device, -global silently loses the
conflict, and both backends involved end up with the floppy device
frontend attached, as demonstrated by iotest 172 (see commit before
previous). This is wrong.
Desugar -drive if=floppy straight to floppy devices instead, with
helper fdctrl_init_drives(). The conflict now gets rejected cleanly:
first, fdctrl_connect_drives() creates the floppy for the controller's
property, then fdctrl_init_drives() attempts to create the floppy for
-drive if=floppy, but fails because the unit is already in use.
Output of iotest 172 changes in three ways:
1. The clash gets rejected.
2. In one test case, "info qtree" has the floppy devices swapped, and
"info block" has their QOM paths swapped. This is because the
floppy device for -fda now gets created after the one for -global
isa-fdc.driveB.
3. The error message for -global floppy.drive=floppy0 changes. Before
the patch, we set isa-fdc.driveA to -fda's block backend, then
create the floppy device for it, then move the backend from
isa-fdc.driveA to floppy.drive. Floppy creation fails when
applying -global floppy.drive=floppy0, because floppy0 is still
attached to isa-fdc. After the patch, we create the floppy for
-fda, then set its drive property to floppy0. Now floppy creation
succeeds, but setting the drive property fails, because -global
already set it. Yes, this is exasperatingly complicated.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-5-armbru@redhat.com>
Use of -global to set a default backend for non-singleton devices is a
bad idea. But as long as we permit it, we better test it.
Test output demonstrates we screw up when -global floppy clashes with
-fda or with -device floppy: according to "info qtree", only the
latter backend is attached, but according to "info block", both are.
Here's the clash with -device:
dev: isa-fdc, id ""
[...]
driveA = ""
driveB = ""
[...]
bus: floppy-bus.0
type floppy-bus
dev: floppy, id ""
unit = 0 (0x0)
---> drive = "none1"
[...]
none0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
---> Attached to: /machine/peripheral-anon/device[0]
Cache mode: writeback
none1 (NODE_NAME): TEST_DIR/t.qcow2.2 (qcow2)
---> Attached to: /machine/peripheral-anon/device[0]
Removable device: not locked, tray closed
Cache mode: writeback
/machine/peripheral-anon/device[0] is the floppy created with -device.
Test output further demonstrates the "Drive 'FOO' is already in use
because it has been automatically connected to another device" error
message can be misleading. With '-fda "" -global
floppy.drive=floppy0', it's in use because -global reuses -fda's
backend. There is no other device involved.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-4-armbru@redhat.com>
The additional output demonstrates we screw up when -global isa-fdc
clashes with -drive if=floppy or its sugared forms: according to "info
qtree", only the latter backend is attached, but according to "info
block", both are. For instance:
projects / mirror_qemu.git / log