Linus Torvalds [Fri, 24 May 2024 15:43:25 +0000 (08:43 -0700)]
Merge tag 'char-misc-6.10-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is one remaining bugfix for 6.10-rc1 that missed the 6.9-final
merge window, and has been sitting in my tree and linux-next for quite
a while now, but wasn't sent to you (my fault, travels...)
It is a bugfix to resolve an error in the speakup code that could
overflow a buffer.
It has been in linux-next for a while with no reported problems"
* tag 'char-misc-6.10-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
speakup: Fix sizeof() vs ARRAY_SIZE() bug
Linus Torvalds [Fri, 24 May 2024 15:38:28 +0000 (08:38 -0700)]
Merge tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and Serial driver fixes that missed the
6.9-final merge window, but have been in my tree for weeks (my fault,
travel caused me to miss this)
These fixes include:
- more n_gsm fixes for reported problems
- 8520_mtk driver fix
- 8250_bcm7271 driver fix
- sc16is7xx driver fix
All of these have been in linux-next for weeks without any reported
problems"
* tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler
serial: 8250_bcm7271: use default_mux_rate if possible
serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup
tty: n_gsm: fix missing receive state reset after mode switch
tty: n_gsm: fix possible out-of-bounds in gsm0_receive()
Linus Torvalds [Fri, 24 May 2024 15:33:44 +0000 (08:33 -0700)]
Merge tag 'hardening-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module
decompression (Stephen Boyd)
- ubsan: Restore dependency on ARCH_HAS_UBSAN
- kunit/fortify: Fix memcmp() test to be amplitude agnostic
* tag 'hardening-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kunit/fortify: Fix memcmp() test to be amplitude agnostic
ubsan: Restore dependency on ARCH_HAS_UBSAN
loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression
Linus Torvalds [Fri, 24 May 2024 15:27:34 +0000 (08:27 -0700)]
Merge tag 'trace-tracefs-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs/eventfs updates from Steven Rostedt:
"Bug fixes:
- The eventfs directories need to have unique inode numbers. Make
sure that they do not get the default file inode number.
- Update the inode uid and gid fields on remount.
When a remount happens where a uid and/or gid is specified, all the
tracefs files and directories should get the specified uid and/or
gid. But this can be sporadic when some uids were assigned already.
There's already a list of inodes that are allocated. Just update
their uid and gid fields at the time of remount.
- Update the eventfs_inodes on remount from the top level "events"
descriptor.
There was a bug where not all the eventfs files or directories
where getting updated on remount. One fix was to clear the
SAVED_UID/GID flags from the inode list during the iteration of the
inodes during the remount. But because the eventfs inodes can be
freed when the last referenced is released, not all the
eventfs_inodes were being updated. This lead to the ownership
selftest to fail if it was run a second time (the first time would
leave eventfs_inodes with no corresponding tracefs_inode).
Instead, for eventfs_inodes, only process the "events"
eventfs_inode from the list iteration, as it is guaranteed to have
a tracefs_inode (it's never freed while the "events" directory
exists). As it has a list of its children, and the children have a
list of their children, just iterate all the eventfs_inodes from
the "events" descriptor and it is guaranteed to get all of them.
- Clear the EVENT_INODE flag from the tracefs_drop_inode() callback.
Currently the EVENTFS_INODE FLAG is cleared in the tracefs_d_iput()
callback. But this is the wrong location. The iput() callback is
called when the last reference to the dentry inode is hit. There
could be a case where two dentry's have the same inode, and the
flag will be cleared prematurely. The flag needs to be cleared when
the last reference of the inode is dropped and that happens in the
inode's drop_inode() callback handler.
Cleanups:
- Consolidate the creation of a tracefs_inode for an eventfs_inode
A tracefs_inode is created for both files and directories of the
eventfs system. It is open coded. Instead, consolidate it into a
single eventfs_get_inode() function call.
- Remove the eventfs getattr and permission callbacks.
The permissions for the eventfs files and directories are updated
when the inodes are created, on remount, and when the user sets
them (via setattr). The inodes hold the current permissions so
there is no need to have custom getattr or permissions callbacks as
they will more likely cause them to be incorrect. The inode's
permissions are updated when they should be updated. Remove the
getattr and permissions inode callbacks.
- Do not update eventfs_inode attributes on creation of inodes.
The eventfs_inodes attribute field is used to store the permissions
of the directories and files for when their corresponding inodes
are freed and are created again. But when the creation of the
inodes happen, the eventfs_inode attributes are recalculated. The
recalculation should only happen when the permissions change for a
given file or directory. Currently, the attribute changes are just
being set to their current files so this is not a bug, but it's
unnecessary and error prone. Stop doing that.
- The events directory inode is created once when the events
directory is created and deleted when it is deleted. It is now
updated on remount and when the user changes the permissions.
There's no need to use the eventfs_inode of the events directory to
store the events directory permissions. But using it to store the
default permissions for the files within the directory that have
not been updated by the user can simplify the code"
* tag 'trace-tracefs-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Do not use attributes for events directory
eventfs: Cleanup permissions in creation of inodes
eventfs: Remove getattr and permission callbacks
eventfs: Consolidate the eventfs_inode update in eventfs_get_inode()
tracefs: Clear EVENT_INODE flag in tracefs_drop_inode()
eventfs: Update all the eventfs_inodes from the events descriptor
tracefs: Update inode permissions on remount
eventfs: Keep the directories from having the same inode number as files
Linus Torvalds [Thu, 23 May 2024 20:51:09 +0000 (13:51 -0700)]
Merge tag 'nfs-for-6.10-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Stable fixes:
- nfs: fix undefined behavior in nfs_block_bits()
- NFSv4.2: Fix READ_PLUS when server doesn't support OP_READ_PLUS
Bugfixes:
- Fix mixing of the lock/nolock and local_lock mount options
- NFSv4: Fixup smatch warning for ambiguous return
- NFSv3: Fix remount when using the legacy binary mount api
- SUNRPC: Fix the handling of expired RPCSEC_GSS contexts
- SUNRPC: fix the NFSACL RPC retries when soft mounts are enabled
- rpcrdma: fix handling for RDMA_CM_EVENT_DEVICE_REMOVAL
Features and cleanups:
- NFSv3: Use the atomic_open API to fix open(O_CREAT|O_TRUNC)
- pNFS/filelayout: S layout segment range in LAYOUTGET
- pNFS: rework pnfs_generic_pg_check_layout to check IO range
- NFSv2: Turn off enabling of NFS v2 by default"
* tag 'nfs-for-6.10-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: fix undefined behavior in nfs_block_bits()
pNFS: rework pnfs_generic_pg_check_layout to check IO range
pNFS/filelayout: check layout segment range
pNFS/filelayout: fixup pNfs allocation modes
rpcrdma: fix handling for RDMA_CM_EVENT_DEVICE_REMOVAL
NFS: Don't enable NFS v2 by default
NFS: Fix READ_PLUS when server doesn't support OP_READ_PLUS
sunrpc: fix NFSACL RPC retry on soft mount
SUNRPC: fix handling expired GSS context
nfs: keep server info for remounts
NFSv4: Fixup smatch warning for ambiguous return
NFS: make sure lock/nolock overriding local_lock mount option
NFS: add atomic_open for NFSv3 to handle O_TRUNC correctly.
pNFS/filelayout: Specify the layout segment range in LAYOUTGET
pNFS/filelayout: Remove the whole file layout requirement
Linus Torvalds [Thu, 23 May 2024 20:44:47 +0000 (13:44 -0700)]
Merge tag 'block-6.10-20240523' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
"Followup block updates, mostly due to NVMe being a bit late to the
party. But nothing major in there, so not a big deal.
* tag 'block-6.10-20240523' of git://git.kernel.dk/linux: (24 commits)
null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'
blk-throttle: remove unused struct 'avg_latency_bucket'
block: fix lost bio for plug enabled bio based device
block: t10-pi: add MODULE_DESCRIPTION()
blk-mq: add helper for checking if one CPU is mapped to specified hctx
blk-cgroup: Properly propagate the iostat update up the hierarchy
blk-cgroup: fix list corruption from reorder of WRITE ->lqueued
blk-cgroup: fix list corruption from resetting io stat
cdrom: rearrange last_media_change check to avoid unintentional overflow
nbd: Fix signal handling
nbd: Remove a local variable from nbd_send_cmd()
nbd: Improve the documentation of the locking assumptions
nbd: Remove superfluous casts
nbd: Use NULL to represent a pointer
brd: implement discard support
null_blk: Fix two sparse warnings
ublk_drv: set DMA alignment mask to 3
nvme-rdma, nvme-tcp: include max reconnects for reconnect logging
nvmet-rdma: Avoid o(n^2) loop in delete_ctrl
nvme: do not retry authentication failures
...
Linus Torvalds [Thu, 23 May 2024 20:41:49 +0000 (13:41 -0700)]
Merge tag 'io_uring-6.10-20240523' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Single fix here for a regression in 6.9, and then a simple cleanup
removing some dead code"
* tag 'io_uring-6.10-20240523' of git://git.kernel.dk/linux:
io_uring: remove checks for NULL 'sq_offset'
io_uring/sqpoll: ensure that normal task_work is also run timely
Linus Torvalds [Thu, 23 May 2024 20:39:42 +0000 (13:39 -0700)]
Merge tag 'regulator-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A bunch of fixes that came in during the merge window.
Matti found several issues with some of the more complexly configured
Rohm regulators and the helpers they use and there were some errors in
the specification of tps6594 when regulators are grouped together"
* tag 'regulator-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps6594-regulator: Correct multi-phase configuration
regulator: tps6287x: Force writing VSEL bit
regulator: pickable ranges: don't always cache vsel
regulator: rohm-regulator: warn if unsupported voltage is set
regulator: bd71828: Don't overwrite runtime voltages
Linus Torvalds [Thu, 23 May 2024 20:38:31 +0000 (13:38 -0700)]
Merge tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Guenter ran with memory sanitisers and found an issue in the new KUnit
tests that Richard added where an assumption in older test code was
exposed, this was fixed quickly by Richard"
* tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Fix array overflow in stride() test
Linus Torvalds [Thu, 23 May 2024 19:49:37 +0000 (12:49 -0700)]
Merge tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite smaller than usual. Notably it includes the fix for the unix
regression from the past weeks. The TCP window fix will require some
follow-up, already queued.
Current release - regressions:
- af_unix: fix garbage collection of embryos
Previous releases - regressions:
- af_unix: fix race between GC and receive path
- ipv6: sr: fix missing sk_buff release in seg6_input_core
- tcp: remove 64 KByte limit for initial tp->rcv_wnd value
- eth: r8169: fix rx hangup
- eth: lan966x: remove ptp traps in case the ptp is not enabled
- eth: ixgbe: fix link breakage vs cisco switches
- eth: ice: prevent ethtool from corrupting the channels
Previous releases - always broken:
- openvswitch: set the skbuff pkt_type for proper pmtud support
- tcp: Fix shift-out-of-bounds in dctcp_update_alpha()
Misc:
- a bunch of selftests stabilization patches"
* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
idpf: Interpret .set_channels() input differently
ice: Interpret .set_channels() input differently
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
net: relax socket state check at accept time.
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
tls: fix missing memory barrier in tls_init
net: fec: avoid lock evasion when reading pps_enable
Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
testing: net-drv: use stats64 for testing
net: mana: Fix the extra HZ in mana_hwc_send_request
net: lan966x: Remove ptp traps in case the ptp is not enabled.
openvswitch: Set the skbuff pkt_type for proper pmtud support.
selftest: af_unix: Make SCM_RIGHTS into OOB data.
af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
selftests/net: use tc rule to filter the na packet
ipv6: sr: fix memleak in seg6_hmac_init_algo
af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
...
Linus Torvalds [Thu, 23 May 2024 19:36:38 +0000 (12:36 -0700)]
Merge tag 'trace-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Minor last minute fixes:
- Fix a very tight race between the ring buffer readers and resizing
the ring buffer
- Correct some stale comments in the ring buffer code
- Fix kernel-doc in the rv code
- Add a MODULE_DESCRIPTION to preemptirq_delay_test"
* tag 'trace-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Update rv_en(dis)able_monitor doc to match kernel-doc
tracing: Add MODULE_DESCRIPTION() to preemptirq_delay_test
ring-buffer: Fix a race between readers and resize checks
ring-buffer: Correct stale comments related to non-consuming readers
Linus Torvalds [Thu, 23 May 2024 19:32:15 +0000 (12:32 -0700)]
Merge tag 'trace-tools-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tool fix from Steven Rostedt:
"Fix printf format warnings in latency-collector.
Use the printf format string with %s to take a string instead of
taking in a string directly"
* tag 'trace-tools-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/latency-collector: Fix -Wformat-security compile warns
Linus Torvalds [Thu, 23 May 2024 19:28:01 +0000 (12:28 -0700)]
Merge tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing cleanup from Steven Rostedt:
"Remove second argument of __assign_str()
The __assign_str() macro logic of the TRACE_EVENT() macro was
optimized so that it no longer needs the second argument. The
__assign_str() is always matched with __string() field that takes a
field name and the source for that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then
use that value to copy into the ring buffer via the __assign_str().
Before commit c1fa617caeb0 ("tracing: Rework __assign_str() and
__string() to not duplicate getting the string"), the __assign_str()
needed the second argument which would perform the same logic as the
__string() source parameter did. Not only would this add overhead, but
it was error prone as if the __assign_str() source produced something
different, it may not have allocated enough for the string in the ring
buffer (as the __string() source was used to determine how much to
allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be
removed"
* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/treewide: Remove second parameter of __assign_str()
Linus Torvalds [Thu, 23 May 2024 19:09:22 +0000 (12:09 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The major fix here is for a filesystem corruption issue reported on
Apple M1 as a result of buggy management of the floating point
register state introduced in 6.8. I initially reverted one of the
offending patches, but in the end Ard cooked a proper fix so there's a
revert+reapply in the series.
Aside from that, we've got some CPU errata workarounds and misc other
fixes.
- Fix broken FP register state tracking which resulted in filesystem
corruption when dm-crypt is used
- Workarounds for Arm CPU errata affecting the SSBS Spectre
mitigation
- Fix lockdep assertion in DMC620 memory controller PMU driver
- Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
disabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Avoid erroneous elide of user state reload
Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
perf/arm-dmc620: Fix lockdep assert in ->event_init()
Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: errata: Add workaround for Arm errata 3194386 and 3312417
arm64: cputype: Add Neoverse-V3 definitions
arm64: cputype: Add Cortex-X4 definitions
arm64: barrier: Restore spec_bar() macro
Linus Torvalds [Thu, 23 May 2024 19:04:36 +0000 (12:04 -0700)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
Fix the following -Wformat-security compile warnings adding missing
format arguments:
latency-collector.c: In function ‘show_available’:
latency-collector.c:938:17: warning: format not a string literal and
no format arguments [-Wformat-security]
938 | warnx(no_tracer_msg);
| ^~~~~
latency-collector.c:943:17: warning: format not a string literal and
no format arguments [-Wformat-security]
943 | warnx(no_latency_tr_msg);
| ^~~~~
latency-collector.c: In function ‘find_default_tracer’:
latency-collector.c:986:25: warning: format not a string literal and
no format arguments [-Wformat-security]
986 | errx(EXIT_FAILURE, no_tracer_msg);
|
^~~~
latency-collector.c: In function ‘scan_arguments’:
latency-collector.c:1881:33: warning: format not a string literal and
no format arguments [-Wformat-security]
1881 | errx(EXIT_FAILURE, no_tracer_msg);
| ^~~~
Ken Milmore [Tue, 21 May 2024 22:45:50 +0000 (23:45 +0100)]
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
An issue was found on the RTL8125b when transmitting small fragmented
packets, whereby invalid entries were inserted into the transmit ring
buffer, subsequently leading to calls to dma_unmap_single() with a null
address.
This was caused by rtl8169_start_xmit() not noticing changes to nr_frags
which may occur when small packets are padded (to work around hardware
quirks) in rtl8169_tso_csum_v2().
To fix this, postpone inspecting nr_frags until after any padding has been
applied.
eventfs: Do not use attributes for events directory
The top "events" directory has a static inode (it's created when it is and
removed when the directory is removed). There's no need to use the events
ei->attr to determine its permissions. But it is used for saving the
permissions of the "events" directory for when it is created, as that is
needed for the default permissions for the files and directories
underneath it.
For example:
# cd /sys/kernel/tracing
# mkdir instances/foo
# chown 1001 instances/foo/events
The files under instances/foo/events should still have the same owner as
instances/foo (which the instances/foo/events ei->attr will hold), but the
events directory now has owner 1001.
Link: https://lore.kernel.org/lkml/20240522165032.104981011@goodmis.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
eventfs: Cleanup permissions in creation of inodes
The permissions being set during the creation of the inodes was updating
eventfs_inode attributes as well. Those attributes should only be touched
by the setattr or remount operations, not during the creation of inodes.
The eventfs_inode attributes should only be used to set the inodes and
should not be modified during the inode creation.
Simplify the code and fix the situation by:
1) Removing the eventfs_find_events() and doing a simple lookup for
the events descriptor in eventfs_get_inode()
2) Remove update_events_attr() as the attributes should only be used
to update the inode and should not be modified here.
3) Add update_inode_attr() that uses the attributes to determine what
the inode permissions should be.
4) As the parent_inode of the eventfs_root_inode structure is no longer
needed, remove it.
Now on creation, the inode gets the proper permissions without causing
side effects to the ei->attr field.
Link: https://lore.kernel.org/lkml/20240522165031.944088388@goodmis.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that inodes have their permissions updated on remount, the only other
places to update the inode permissions are when they are created and in
the setattr callback. The getattr and permission callbacks are not needed
as the inodes should already be set at their proper settings.
Remove the callbacks, as it not only simplifies the code, but also allows
more flexibility to fix the inconsistencies with various corner cases
(like changing the permission of an instance directory).
Link: https://lore.kernel.org/lkml/20240522165031.782066021@goodmis.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
eventfs: Consolidate the eventfs_inode update in eventfs_get_inode()
To simplify the code, create a eventfs_get_inode() that is used when an
eventfs file or directory is created. Have the internal tracefs_inode
updated the appropriate flags in this function and update the inode's
mode as well.
Link: https://lore.kernel.org/lkml/20240522165031.624864160@goodmis.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
tracefs: Clear EVENT_INODE flag in tracefs_drop_inode()
When the inode is being dropped from the dentry, the TRACEFS_EVENT_INODE
flag needs to be cleared to prevent a remount from calling
eventfs_remount() on the tracefs_inode private data. There's a race
between the inode is dropped (and the dentry freed) to where the inode is
actually freed. If a remount happens between the two, the eventfs_inode
could be accessed after it is freed (only the dentry keeps a ref count on
it).
Currently the TRACEFS_EVENT_INODE flag is cleared from the dentry iput()
function. But this is incorrect, as it is possible that the inode has
another reference to it. The flag should only be cleared when the inode is
really being dropped and has no more references. That happens in the
drop_inode callback of the inode, as that gets called when the last
reference of the inode is released.
Remove the tracefs_d_iput() function and move its logic to the more
appropriate tracefs_drop_inode() callback function.
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.908205106@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Fixes: baa23a8d4360d ("tracefs: Reset permissions on remount if permissions are options") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
eventfs: Update all the eventfs_inodes from the events descriptor
The change to update the permissions of the eventfs_inode had the
misconception that using the tracefs_inode would find all the
eventfs_inodes that have been updated and reset them on remount.
The problem with this approach is that the eventfs_inodes are freed when
they are no longer used (basically the reason the eventfs system exists).
When they are freed, the updated eventfs_inodes are not reset on a remount
because their tracefs_inodes have been freed.
Instead, since the events directory eventfs_inode always has a
tracefs_inode pointing to it (it is not freed when finished), and the
events directory has a link to all its children, have the
eventfs_remount() function only operate on the events eventfs_inode and
have it descend into its children updating their uid and gids.
When a remount happens, if a gid or uid is specified update the inodes to
have the same gid and uid. This will allow the simplification of the
permissions logic for the dynamically created files and directories.
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.592429986@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Fixes: baa23a8d4360d ("tracefs: Reset permissions on remount if permissions are options") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
eventfs: Keep the directories from having the same inode number as files
The directories require unique inode numbers but all the eventfs files
have the same inode number. Prevent the directories from having the same
inode numbers as the files as that can confuse some tooling.
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.428826685@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Fixes: 834bf76add3e6 ("eventfs: Save directory inodes in the eventfs_inode structure") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This is because del_gendisk() can concurrent with
blk_mq_update_nr_hw_queues():
nullb_device_power_store nullb_apply_submit_queues
null_del_dev
del_gendisk
nullb_update_nr_hw_queues
if (!dev->nullb)
// still set while gendisk is deleted
return 0
blk_mq_update_nr_hw_queues
dev->nullb = NULL
Fix this problem by resuing the global mutex to protect
nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs.
Fixes: 45919fbfe1c4 ("null_blk: Enable modifying 'submit_queues' after an instance has been configured") Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/all/CAHj4cs9LgsHLnjg8z06LQ3Pr5cax-+Ps+xT7AP7TPnEjStuwZA@mail.gmail.com/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Link: https://lore.kernel.org/r/20240523153934.1937851-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ice and idpf drivers can trigger a crash with AF_XDP due to incorrect
interpretation of the asymmetric Tx and Rx parameters in their
.set_channels() implementations:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
combined number is not specified, so command becomes {rx_count = 15,
tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
new (combined_count + rx_count) to the old one, so from 55 to 40, check
does not trigger.
5. the driver interprets `rx 15 tx 15` as 15 combined channels and deletes
the queue that AF_XDP is attached to.
This is fundamentally a problem with interpreting a request for asymmetric
queues as symmetric combined queues.
Fix the ice and idpf drivers to stop interpreting such requests as a
request for combined queues. Due to current driver design for both ice and
idpf, it is not possible to support requests of the same count of Tx and Rx
queues with independent interrupts, (i.e. ethtool -L <IFNAME> rx 15 tx 15)
so such requests are now rejected.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Larysa Zaremba [Tue, 21 May 2024 19:39:54 +0000 (12:39 -0700)]
idpf: Interpret .set_channels() input differently
Unlike ice, idpf does not check, if user has requested at least 1 combined
channel. Instead, it relies on a check in the core code. Unfortunately, the
check does not trigger for us because of the hacky .set_channels()
interpretation logic that is not consistent with the core code.
This naturally leads to user being able to trigger a crash with an invalid
input. This is how:
1. ethtool -l <IFNAME> -> combined: 40
2. ethtool -L <IFNAME> rx 0 tx 0
combined number is not specified, so command becomes {rx_count = 0,
tx_count = 0, combined_count = 40}.
3. ethnl_set_channels checks, if there is at least 1 RX and 1 TX channel,
comparing (combined_count + rx_count) and (combined_count + tx_count)
to zero. Obviously, (40 + 0) is greater than zero, so the core code
deems the input OK.
4. idpf interprets `rx 0 tx 0` as 0 channels and tries to proceed with such
configuration.
The issue has to be solved fundamentally, as current logic is also known to
cause AF_XDP problems in ice [0].
Interpret the command in a way that is more consistent with ethtool
manual [1] (--show-channels and --set-channels) and new ice logic.
Considering that in the idpf driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
Larysa Zaremba [Tue, 21 May 2024 19:39:53 +0000 (12:39 -0700)]
ice: Interpret .set_channels() input differently
A bug occurs because a safety check guarding AF_XDP-related queues in
ethnl_set_channels(), does not trigger. This happens, because kernel and
ice driver interpret the ethtool command differently.
How the bug occurs:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
combined number is not specified, so command becomes {rx_count = 15,
tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
new (combined_count + rx_count) to the old one, so from 55 to 40, check
does not trigger.
5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the
queue that AF_XDP is attached to.
Interpret the command in a way that is more consistent with ethtool
manual [0] (--show-channels and --set-channels).
Considering that in the ice driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
Ryosuke Yasuoka [Tue, 21 May 2024 15:34:42 +0000 (00:34 +0900)]
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
When nci_rx_work() receives a zero-length payload packet, it should not
discard the packet and exit the loop. Instead, it should continue
processing subsequent packets.
Fixes: d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240521153444.535399-1-ryasuoka@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The reproducer invokes shutdown() before entering the listener status.
After commit 94062790aedb ("tcp: defer shutdown(SEND_SHUTDOWN) for
TCP_SYN_RECV sockets"), the above causes the child to reach the accept
syscall in FIN_WAIT1 status.
Eric noted we can relax the existing assertion in __inet_accept()
Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/490 Suggested-by: Eric Dumazet <edumazet@google.com> Fixes: 94062790aedb ("tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets") Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/23ab880a44d8cfd967e84de8b93dbf48848e3d8c.1716299669.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Tue, 21 May 2024 13:42:20 +0000 (21:42 +0800)]
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
Recently, we had some servers upgraded to the latest kernel and noticed
the indicator from the user side showed worse results than before. It is
caused by the limitation of tp->rcv_wnd.
In 2018 commit a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin
to around 64KB") limited the initial value of tp->rcv_wnd to 65535, most
CDN teams would not benefit from this change because they cannot have a
large window to receive a big packet, which will be slowed down especially
in long RTT. Small rcv_wnd means slow transfer speed, to some extent. It's
the side effect for the latency/time-sensitive users.
To avoid future confusion, current change doesn't affect the initial
receive window on the wire in a SYN or SYN+ACK packet which are set within
65535 bytes according to RFC 7323 also due to the limit in
__tcp_transmit_skb():
th->window = htons(min(tp->rcv_wnd, 65535U));
In one word, __tcp_transmit_skb() already ensures that constraint is
respected, no matter how large tp->rcv_wnd is. The change doesn't violate
RFC.
Let me provide one example if with or without the patch:
Before:
client --- SYN: rwindow=65535 ---> server
client <--- SYN+ACK: rwindow=65535 ---- server
client --- ACK: rwindow=65536 ---> server
Note: for the last ACK, the calculation is 512 << 7.
After:
client --- SYN: rwindow=65535 ---> server
client <--- SYN+ACK: rwindow=65535 ---- server
client --- ACK: rwindow=175232 ---> server
Note: I use the following command to make it work:
ip route change default via [ip] dev eth0 metric 100 initrwnd 120
For the last ACK, the calculation is 1369 << 7.
When we apply such a patch, having a large rcv_wnd if the user tweak this
knob can help transfer data more rapidly and save some rtts.
Fixes: a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20240521134220.12510-1-kerneljasonxing@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Romain Gantois [Tue, 21 May 2024 12:44:11 +0000 (14:44 +0200)]
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.
Check the return code of emac_phy_connect and fail cleanly if there is an
error.
Dae R. Jeong [Tue, 21 May 2024 10:34:38 +0000 (19:34 +0900)]
tls: fix missing memory barrier in tls_init
In tls_init(), a write memory barrier is missing, and store-store
reordering may cause NULL dereference in tls_{setsockopt,getsockopt}.
CPU0 CPU1
----- -----
// In tls_init()
// In tls_ctx_create()
ctx = kzalloc()
ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1)
// In update_sk_prot()
WRITE_ONCE(sk->sk_prot, tls_prots) -(2)
// In sock_common_setsockopt()
READ_ONCE(sk->sk_prot)->setsockopt()
// In tls_{setsockopt,getsockopt}()
ctx->sk_proto->setsockopt() -(3)
In the above scenario, when (1) and (2) are reordered, (3) can observe
the NULL value of ctx->sk_proto, causing NULL dereference.
To fix it, we rely on rcu_assign_pointer() which implies the release
barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is
initialized, we can ensure that ctx->sk_proto are visible when
changing sk->sk_prot.
Wei Fang [Tue, 21 May 2024 02:38:00 +0000 (10:38 +0800)]
net: fec: avoid lock evasion when reading pps_enable
The assignment of pps_enable is protected by tmreg_lock, but the read
operation of pps_enable is not. So the Coverity tool reports a lock
evasion warning which may cause data race to occur when running in a
multithread environment. Although this issue is almost impossible to
occur, we'd better fix it, at least it seems more logically reasonable,
and it also prevents Coverity from continuing to issue warnings.
According to the commit, it implements a manual AN-37 for some
"troublesome" Juniper MX5 switches. This appears to be a workaround for a
particular switch.
It has been reported that this causes a severe breakage for other switches,
including a Cisco 3560CX-12PD-S.
The code appears to be a workaround for a specific switch which fails to
link in SFI mode. It expects to see AN-37 auto negotiation in order to
link. The Cisco switch is not expecting AN-37 auto negotiation. When the
device starts the manual AN-37, the Cisco switch decides that the port is
confused and stops attempting to link with it. This persists until a power
cycle. A simple driver unload and reload does not resolve the issue, even
if loading with a version of the driver which lacks this workaround.
The authors of the workaround commit have not responded with
clarifications, and the result of the workaround is complete failure to
connect with other switches.
This appears to be a case where the driver can either "correctly" link with
the Juniper MX5 switch, at the cost of bricking the link with the Cisco
switch, or it can behave properly for the Cisco switch, but fail to link
with the Junipir MX5 switch. I do not know enough about the standards
involved to clearly determine whether either switch is at fault or behaving
incorrectly. Nor do I know whether there exists some alternative fix which
corrects behavior with both switches.
Joe Damato [Mon, 20 May 2024 23:58:43 +0000 (23:58 +0000)]
testing: net-drv: use stats64 for testing
Testing a network device that has large numbers of bytes/packets may
overflow. Using stats64 when comparing fixes this problem.
I tripped on this while iterating on a qstats patch for mlx5. See below
for confirmation without my added code that this is a bug.
Before this patch (with added debugging output):
$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
rstat: 481708634 qstat: 666201639514 key: tx-bytes
not ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
Note the huge delta above ^^^ in the rtnl vs qstats.
After this patch:
$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
It looks like rtnl_fill_stats in net/core/rtnetlink.c will attempt to
copy the 64bit stats into a 32bit structure which is probably why this
behavior is occurring.
To show this is happening, you can get the underlying stats that the
stats.py test uses like this:
Note that the above was taken from a system with an mlx5 NIC, which only
exposes ndo_get_stats64.
Based on the ethtool output and qstat output, it appears that stats.py
should be updated to use the 'stats64' structure for accurate
comparisons when packet/byte counters get very large.
To confirm that this was not related to the qstats code I was iterating
on, I booted a kernel without my driver changes and re-ran the test
which shows the qstats are skipped (as they don't exist for mlx5):
NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum # SKIP qstats not supported by the device
ok 4 stats.qstat_by_ifindex # SKIP No ifindex supports qstats
Linus Torvalds [Thu, 23 May 2024 01:59:29 +0000 (18:59 -0700)]
Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
Linus Torvalds [Thu, 23 May 2024 00:32:04 +0000 (17:32 -0700)]
Merge tag 'mm-stable-2024-05-22-17-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more mm updates from Andrew Morton:
"A series from Dave Chinner which cleans up and fixes the handling of
nested allocations within stackdepot and page-owner"
* tag 'mm-stable-2024-05-22-17-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page-owner: use gfp_nested_mask() instead of open coded masking
stackdepot: use gfp_nested_mask() instead of open coded masking
mm: lift gfp_kmemleak_mask() to gfp.h
tracing/treewide: Remove second parameter of __assign_str()
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
Use '%pD' to print out the filename, and print out the actual offset
within the file too, rather than just what the virtual address of the
mapping is (which doesn't tell you anything about any mapping offsets).
Also, use the exact vma_lookup() instead of find_vma() - the latter
looks up any vma _after_ the address, which is of questionable value
(yes, maybe you fell off the beginning, but you'd be more likely to fall
off the end).
Linus Torvalds [Wed, 22 May 2024 21:13:22 +0000 (14:13 -0700)]
Merge local branch 'x86-codegen'
Merge trivial x86 code generation annoyances
- Introduce helper macros for clang asm input problems
- use said macros to improve trivially stupid code generation issues in
bitops and array_index_mask_nospec
- also improve codegen with 32-bit array index comparisons
None of these really matter, but I look at code generation and profiles
fairly regularly, and these misfeatures caused the generated code to
look really odd and distract from the real issues.
* branch 'x86-codegen' of local tree:
x86: improve bitop code generation with clang
x86: improve array_index_mask_nospec() code generation
clang: work around asm input constraint problems
Don't force the inputs to be 'unsigned long', when the comparison can
easily be done in 32-bit if that's more appropriate.
Note that while we can look at the inputs to choose an appropriate size
for the compare instruction, the output is fixed at 'unsigned long'.
That's not technically optimal either, since a 32-bit 'sbbl' would often
be sufficient.
But for the outgoing mask we don't know how the mask ends up being used
(ie we have uses that have an incoming 32-bit array index, but end up
using the mask for other things). That said, it only costs the extra
REX prefix to always generate the 64-bit mask.
[ A 'sbbl' also always technically generates a 64-bit mask, but with the
upper 32 bits clear: that's fine for when the incoming index that will
be masked is already 32-bit, but not if you use the mask to mask a
pointer afterwards, like the file table lookup does ]
Cc: Peter Zijlstra <peterz@infradead.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Work around clang problems with asm constraints that have multiple
possibilities, particularly "g" and "rm".
Clang seems to turn inputs like that into the most generic form, which
is the memory input - but to make matters worse, clang won't even use a
possible original memory location, but will spill the value to stack,
and use the stack for the asm input.
Linus Torvalds [Wed, 22 May 2024 19:26:46 +0000 (12:26 -0700)]
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
Linus Torvalds [Wed, 22 May 2024 19:13:40 +0000 (12:13 -0700)]
Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
Linus Torvalds [Wed, 22 May 2024 19:11:48 +0000 (12:11 -0700)]
Merge tag 'staging-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver changes for 6.10-rc1. Not a lot
of cleanups happening this kernel release, intern applications must be
out of sync at the moment. But we did delete two drivers, wlan-ng and
pi433, as they are no longer in use and the developers involved wanted
them just gone entirely, allowing us to drop 19k lines from the tree.
Other than the normal coding style cleanups here, there has been a lot
of work on the vc04_services code, with the intent to finally get that
out of staging hopefully soon. It's getting closer, which is nice to
see.
All of these have been in linux-next for a while with no reported
issues"
Linus Torvalds [Wed, 22 May 2024 18:53:02 +0000 (11:53 -0700)]
Merge tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.10-rc1.
Included in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos
instead of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
serial: imx: Raise TX trigger level to 8
serial: 8250_pnp: Simplify "line" related code
serial: sh-sci: simplify locking when re-issuing RXDMA fails
serial: sh-sci: let timeout timer only run when DMA is scheduled
serial: sh-sci: describe locking requirements for invalidating RXDMA
serial: sh-sci: protect invalidating RXDMA on shutdown
tty: add the option to have a tty reject a new ldisc
serial: core: Call device_set_awake_path() for console port
dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
tty: serial: uartps: Add support for uartps controller reset
arm64: zynqmp: Add resets property for UART nodes
dt-bindings: serial: cdns,uart: Add optional reset property
serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Keep the includes sorted
serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
serial: 8250_exar: Use BIT() in exar_ee_read()
serial: 8250_exar: Switch to use dev_err_probe()
serial: 8250_exar: Return directly from switch-cases
serial: 8250_exar: Decrease indentation level
...
Linus Torvalds [Wed, 22 May 2024 18:40:09 +0000 (11:40 -0700)]
Merge tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
Linus Torvalds [Wed, 22 May 2024 17:49:54 +0000 (10:49 -0700)]
Merge tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Ensure seldom updated triggers have a brightness value before first
update
New Device Support:
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
New Functionality:
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
Fix-ups:
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
Bug Fixes:
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending"
* tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: mt6370: Remove unused field 'reg_cfgs' from 'struct mt6370_priv'
leds: lp50xx: Remove unused field 'num_of_banked_leds' from 'struct lp50xx'
leds: lp50xx: Remove unused field 'bank_modules' from 'struct lp50xx_led'
leds: aat1290: Remove unused field 'torch_brightness' from 'struct aat1290_led'
leds: sun50i-a100: Use match_string() helper to simplify the code
leds: pwm: Disable PWM when going to suspend
leds: trigger: pattern: Add support for hrtimer
leds: mt6360: Fix the second LED can not enable torch mode by V4L2
dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
leds: qcom-lpg: Add support for PMI8950 PWM
leds: apu: Remove duplicate DMI lookup data
leds: trigger: netdev: Remove not needed call to led_set_brightness in deactivate
dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network
leds: simatic-ipc-leds-gpio: Add support for module BX-59A
dt-bindings: leds: qcom-lpg: Document PM6150L compatible
dt-bindings: leds: pca963x: Convert text bindings to YAML
leds: an30259a: Use devm_mutex_init() for mutex initialization
leds: mlxreg: Use devm_mutex_init() for mutex initialization
leds: nic78bx: Use devm API to cleanup module's resources
...
Linus Torvalds [Wed, 22 May 2024 17:41:14 +0000 (10:41 -0700)]
Merge tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for X-Powers AXP717 PMIC to AXP22X
- Add support for Rockchip RK816 PMIC to RK8XX
- Add support for TI TPS65224 PMIC to TPS6594
New Functionality:
- Add Power Off functionality to Rohm BD71828
- Allow I2C SMBus access in Renesas RSMU
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Shift Intel support over to MSI interrupts
- Generify adding platform data away from being ACPI specific
- Use device core supplied attribute to register sysfs entries
- Replace hand-rolled functionality with generic APIs
- Utilise centrally provided helpers and macros
- Clean-up error handling
- Remove superfluous/duplicated/unused sections
- Trivial; spelling, whitespace, coding-style adaptions
- More Maple Tree conversions"
* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
dt-bindings: mfd: Use full path to other schemas
mfd: rsmu: support I2C SMBus access
dt-bindings: mfd: Convert lp873x.txt to json-schema
dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
mfd: kempld: Remove custom DMI matching code
mfd: cs42l43: Update patching revision check
dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
mfd: timberdale: Remove redundant assignment to variable err
dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
mfd: axp20x: Convert to use Maple Tree register cache
mfd: bd71828: Remove commented code lines
mfd: intel-m10-bmc: Change staging size to a variable
dt-bindings: mfd: Add ROHM BD71879
mfd: Tidy Kconfig dependency's parentheses
mfd: ocelot-spi: Use spi_sync_transfer()
dt-bindings: mfd: syscon: Add missing simple syscon compatibles
...
Jens Axboe [Wed, 22 May 2024 17:13:44 +0000 (11:13 -0600)]
io_uring: remove checks for NULL 'sq_offset'
Since the 5.12 kernel release, nobody has been passing NULL as the
sq_offset pointer. Remove the checks for it being NULL or not, it will
always be valid.
Linus Torvalds [Wed, 22 May 2024 16:56:00 +0000 (09:56 -0700)]
Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
Linus Torvalds [Wed, 22 May 2024 16:43:07 +0000 (09:43 -0700)]
Merge tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Select some options in Kconfig
- Give a chance to build with !CONFIG_SMP
- Switch to use built-in rustc target
- Add new supported device nodes to dts
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: dts: Add new supported device nodes to Loongson-2K2000
LoongArch: dts: Add new supported device nodes to Loongson-2K0500
LoongArch: dts: Remove "disabled" state of clock controller node
LoongArch: rust: Switch to use built-in rustc target
LoongArch: Fix callchain parse error with kernel tracepoint events again
LoongArch: Give a chance to build with !CONFIG_SMP
LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT
LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
LoongArch: Select ARCH_HAS_FAST_MULTIPLIER
Linus Torvalds [Wed, 22 May 2024 16:31:01 +0000 (09:31 -0700)]
Merge tag 'microblaze-v6.10' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
- Cleanup code around removed early_printk
* tag 'microblaze-v6.10' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Remove early printk call from cpuinfo-static.c
microblaze: Remove gcc flag for non existing early_printk.c file
Linus Torvalds [Wed, 22 May 2024 16:23:18 +0000 (09:23 -0700)]
Merge tag 'ovl-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Miklos Szeredi:
- Add tmpfile support
- Clean up include
* tag 'ovl-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: remove duplicate included header
ovl: remove upper umask handling from ovl_create_upper()
ovl: implement tmpfile
Linus Torvalds [Wed, 22 May 2024 16:18:51 +0000 (09:18 -0700)]
Merge tag 'fuse-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add fs-verity support (Richard Fung)
- Add multi-queue support to virtio-fs (Peter-Jan Gootzen)
- Fix a bug in NOTIFY_RESEND handling (Hou Tao)
- page -> folio cleanup (Matthew Wilcox)
* tag 'fuse-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtio-fs: add multi-queue support
virtio-fs: limit number of request queues
fuse: clear FR_SENT when re-adding requests into pending list
fuse: set FR_PENDING atomically in fuse_resend()
fuse: Add initial support for fs-verity
fuse: Convert fuse_readpages_end() to use folio_end_read()
Yafang Shao [Wed, 15 May 2024 09:17:27 +0000 (17:17 +0800)]
vfs: Delete the associated dentry when deleting a file
Our applications, built on Elasticsearch[0], frequently create and
delete files. These applications operate within containers, some with a
memory limit exceeding 100GB. Over prolonged periods, the accumulation
of negative dentries within these containers can amount to tens of
gigabytes.
Upon container exit, directories are deleted. However, due to the
numerous associated dentries, this process can be time-consuming. Our
users have expressed frustration with this prolonged exit duration,
which constitutes our first issue.
Simultaneously, other processes may attempt to access the parent
directory of the Elasticsearch directories. Since the task responsible
for deleting the dentries holds the inode lock, processes attempting
directory lookup experience significant delays. This issue, our second
problem, is easily demonstrated:
- Task 1 generates negative dentries:
$ pwd
~/test
$ mkdir es && cd es/ && ./create_and_delete_files.sh
[ After generating tens of GB dentries ]
$ cd ~/test && rm -rf es
[ It will take a long duration to finish ]
- Task 2 attempts to lookup the 'test/' directory
$ pwd
~/test
$ ls
The 'ls' command in Task 2 experiences prolonged execution as Task 1
is deleting the dentries.
We've devised a solution to address both issues by deleting associated
dentry when removing a file. Interestingly, we've noted that a similar
patch was proposed years ago[1], although it was rejected citing the
absence of tangible issues caused by negative dentries. Given our
current challenges, we're resubmitting the proposal. All relevant
stakeholders from previous discussions have been included for reference.
Some alternative solutions are also under discussion[2][3], such as
shrinking child dentries outside of the parent inode lock or even
asynchronously shrinking child dentries. However, given the
straightforward nature of the current solution, I believe this approach
is still necessary.
[ NOTE! This is a pretty fundamental change in how we deal with
unlinking dentries, and it doesn't change the fact that you can have
lots of negative dentries from just doing negative lookups.
But the kernel test robot is at least initially happy with this from a
performance angle, so I'm applying this ASAP just to get more testing
and as a "known fix for an issue people hit in real life".
Put another way: we should still look at the alternatives, and this
patch may get reverted if somebody finds a performance regression on
some other load. - Linus ]
Li Zhang [Sat, 16 Mar 2024 05:25:54 +0000 (13:25 +0800)]
virtio-pci: Check if is_avq is NULL
[bug]
In the virtio_pci_common.c function vp_del_vqs, vp_dev->is_avq is involved
to determine whether it is admin virtqueue, but this function vp_dev->is_avq
may be empty. For installations, virtio_pci_legacy does not assign a value
to vp_dev->is_avq.
[fix]
Check whether it is vp_dev->is_avq before use.
[test]
Test with virsh Attach device
Before this patch, the following command would crash the guest system
After applying the patch, everything seems to be working fine.
Signed-off-by: Li Zhang <zhanglikernel@gmail.com>
Message-Id: <1710566754-3532-1-git-send-email-zhanglikernel@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
When request_irq() fails, error path calls vp_del_vqs(). There, as vq is
present in the list, free_irq() is called for the same vector. That
causes following splat:
Fix this by calling deleting the current vq when request_irq() fails.
Fixes: 0b0f9dc52ed0 ("Revert "virtio_pci: use shared interrupts for virtqueues"") Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240426150845.3999481-1-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org>
Message-Id: <67c2edf49788c27d5f7a49fc701520b9fcf739b5.1713088999.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Yuxue Liu [Wed, 10 Apr 2024 03:30:20 +0000 (11:30 +0800)]
vp_vdpa: don't allocate unused msix vectors
When there is a ctlq and it doesn't require interrupt
callbacks,the original method of calculating vectors
wastes hardware msi or msix resources as well as system
IRQ resources.
When conducting performance testing using testpmd in the
guest os, it was found that the performance was lower compared
to directly using vfio-pci to passthrough the device
In scenarios where the virtio device in the guest os does
not utilize interrupts, the vdpa driver still configures
the hardware's msix vector. Therefore, the hardware still
sends interrupts to the host os. Because of this unnecessary
action by the hardware, hardware performance decreases, and
it also affects the performance of the host os.
After modification:(virtio pmd mode for guest os)
32: 0 0 0 0 PCI-MSI 32768-edge vp-vdpa[0000:00:02.0]-config
To verify the use of the virtio PMD mode in the guest operating
system, the following patch needs to be applied to QEMU:
https://lore.kernel.org/all/20240408073311.2049-1-yuxue.liu@jaguarmicro.com
Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Message-Id: <20240410033020.1310-1-yuxue.liu@jaguarmicro.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-25-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-24-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-23-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
virtio core already sets the .owner, so driver does not need to.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-22-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-20-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-19-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-18-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-17-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-16-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-15-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-14-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-13-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-11-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-10-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-9-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-8-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-7-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-6-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-5-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-4-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-3-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-2-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
David Stevens [Thu, 21 Mar 2024 01:24:45 +0000 (10:24 +0900)]
virtio_balloon: Treat stats requests as wakeup events
Treat stats requests as wakeup events to ensure that the driver responds
to device requests in a timely manner.
Signed-off-by: David Stevens <stevensd@chromium.org> Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240321012445.1593685-3-stevensd@google.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
David Stevens [Thu, 21 Mar 2024 01:24:44 +0000 (10:24 +0900)]
virtio_balloon: Give the balloon its own wakeup source
Wakeup sources don't support nesting multiple events, so sharing a
single object between multiple drivers can result in one driver
overriding the wakeup event processing period specified by another
driver. Have the virtio balloon driver use the wakeup source of the
device it is bound to rather than the wakeup source of the parent
device, to avoid conflicts with the transport layer.
Note that although the virtio balloon's virtio_device itself isn't what
actually wakes up the device, it is responsible for processing wakeup
events. In the same way that EPOLLWAKEUP uses a dedicated wakeup_source
to prevent suspend when userspace is processing wakeup events, a
dedicated wakeup_source is necessary when processing wakeup events in a
higher layer in the kernel.
Fixes: b12fbc3f787e ("virtio_balloon: stay awake while adjusting balloon") Signed-off-by: David Stevens <stevensd@chromium.org> Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240321012445.1593685-2-stevensd@google.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With virtio-mem, primarily hibernation is problematic: as the machine shuts
down, the virtio-mem device loses its state. Powering the machine back up
is like losing a bunch of DIMMs. While there would be ways to add limited
support, suspend+resume is more commonly used for VMs and "easier" to
support cleanly.
s2idle can be supported without any device dependencies. Similarly, one
would expect suspend-to-ram (i.e., S3) to work out of the box. However,
QEMU currently unplugs all device memory when resuming the VM, using a
cold reset on the "wakeup" path. In order to support S3, we need a feature
flag for the device to tell us if memory remains plugged when waking up. In
the future, QEMU will implement this feature.
So let's always support s2idle and support S3 with plugged memory only if
the device indicates support. Block hibernation early using the PM
notifier.
Trying to hibernate now fails early:
# echo disk > /sys/power/state
[ 26.455369] PM: hibernation: hibernation entry
[ 26.458271] virtio_mem virtio0: hibernation is not supported.
[ 26.462498] PM: hibernation: hibernation exit
-bash: echo: write error: Operation not permitted
s2idle works even without the new feature bit:
# echo s2idle > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 52.083725] PM: suspend entry (s2idle)
[ 52.095950] Filesystems sync: 0.010 seconds
[ 52.101493] Freezing user space processes
[ 52.104213] Freezing user space processes completed (elapsed 0.001 seconds)
[ 52.106520] OOM killer disabled.
[ 52.107655] Freezing remaining freezable tasks
[ 52.110880] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 52.113296] printk: Suspending console(s) (use no_console_suspend to debug)
S3 does not work without the feature bit when memory is plugged:
# echo deep > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 32.788281] PM: suspend entry (deep)
[ 32.816630] Filesystems sync: 0.027 seconds
[ 32.820029] Freezing user space processes
[ 32.823870] Freezing user space processes completed (elapsed 0.001 seconds)
[ 32.827756] OOM killer disabled.
[ 32.829608] Freezing remaining freezable tasks
[ 32.833842] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 32.837953] printk: Suspending console(s) (use no_console_suspend to debug)
[ 32.916172] virtio_mem virtio0: suspend+resume with plugged memory is not supported
[ 32.916181] virtio-pci 0000:00:02.0: PM: pci_pm_suspend(): virtio_pci_freeze+0x0/0x50 returns -1
[ 32.916197] virtio-pci 0000:00:02.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -1
[ 32.916210] virtio-pci 0000:00:02.0: PM: failed to suspend async: error -1
But S3 works with the new feature bit when memory is plugged (patched
QEMU):
# echo deep > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 33.983694] PM: suspend entry (deep)
[ 34.009828] Filesystems sync: 0.024 seconds
[ 34.013589] Freezing user space processes
[ 34.016722] Freezing user space processes completed (elapsed 0.001 seconds)
[ 34.019092] OOM killer disabled.
[ 34.020291] Freezing remaining freezable tasks
[ 34.023549] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 34.026090] printk: Suspending console(s) (use no_console_suspend to debug)
Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240318120645.105664-1-david@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mike Christie [Sat, 16 Mar 2024 00:47:07 +0000 (19:47 -0500)]
kernel: Remove signal hacks for vhost_tasks
This removes the signal/coredump hacks added for vhost_tasks in:
Commit f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
When that patch was added vhost_tasks did not handle SIGKILL and would
try to ignore/clear the signal and continue on until the device's close
function was called. In the previous patches vhost_tasks and the vhost
drivers were converted to support SIGKILL by cleaning themselves up and
exiting. The hacks are no longer needed so this removes them.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-10-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mike Christie [Sat, 16 Mar 2024 00:47:06 +0000 (19:47 -0500)]
vhost_task: Handle SIGKILL by flushing work and exiting
Instead of lingering until the device is closed, this has us handle
SIGKILL by:
1. marking the worker as killed so we no longer try to use it with
new virtqueues and new flush operations.
2. setting the virtqueue to worker mapping so no new works are queued.
3. running all the exiting works.
Suggested-by: Edward Adam Davis <eadavis@qq.com> Reported-and-tested-by: syzbot+98edc2df894917b3431f@syzkaller.appspotmail.com
Message-Id: <tencent_546DA49414E876EEBECF2C78D26D242EE50A@qq.com> Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-9-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mike Christie [Sat, 16 Mar 2024 00:47:05 +0000 (19:47 -0500)]
vhost: Release worker mutex during flushes
In the next patches where the worker can be killed while in use, we
need to be able to take the worker mutex and kill queued works for
new IO and flushes, and set some new flags to prevent new
__vhost_vq_attach_worker calls from swapping in/out killed workers.
If we are holding the worker mutex during a flush and the flush's work
is still in the queue, the worker code that will handle the SIGKILL
cleanup won't be able to take the mutex and perform it's cleanup. So
this patch has us drop the worker mutex while waiting for the flush
to complete.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-8-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mike Christie [Sat, 16 Mar 2024 00:47:04 +0000 (19:47 -0500)]
vhost: Use virtqueue mutex for swapping worker
__vhost_vq_attach_worker uses the vhost_dev mutex to serialize the
swapping of a virtqueue's worker. This was done for simplicity because
we are already holding that mutex.
In the next patches where the worker can be killed while in use, we need
finer grained locking because some drivers will hold the vhost_dev mutex
while flushing. However in the SIGKILL handler in the next patches, we
will need to be able to swap workers (set current one to NULL), kill
queued works and stop new flushes while flushes are in progress.
To prepare us, this has us use the virtqueue mutex for swapping workers
instead of the vhost_dev one.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-7-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mike Christie [Sat, 16 Mar 2024 00:47:03 +0000 (19:47 -0500)]
vhost_scsi: Handle vhost_vq_work_queue failures for TMFs
vhost_vq_work_queue will never fail when queueing the TMF's response
handling because a guest can only send us TMFs when the device is fully
setup so there is always a worker at that time. In the next patches we
will modify the worker code so it handles SIGKILL by exiting before
outstanding commands/TMFs have sent their responses. In that case
vhost_vq_work_queue can fail when we try to send a response.
This has us just free the TMF's resources since at this time the guest
won't be able to get a response even if we could send it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-6-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
projects / mirror_ubuntu-kernels.git / log