Linus Torvalds [Fri, 23 Aug 2013 17:58:50 +0000 (10:58 -0700)]
Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"A late fix for cgroup.
This fixes a behavior regression visible to userland which was created
by a commit merged during -rc1. While the behavior change isn't too
likely to be noticeable, the fix is relatively low risk and we'll need
to backport it through -stable anyway if the bug gets released"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: fix a regression in validating config change
Linus Torvalds [Fri, 23 Aug 2013 17:46:28 +0000 (10:46 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Ben was on holidays for a week so a few nouveau regression fixes
backed up, but they all seem necessary.
Otherwise one i915 and one gma500 fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
gma500: Fix SDVO turning off randomly
drm/nv04/disp: fix framebuffer pin refcounting
drm/nouveau/mc: fix race condition between constructor and request_irq()
drm/nouveau: fix reclocking on nv40
drm/nouveau/ltcg: fix allocating memory as free
drm/nouveau/ltcg: fix ltcg memory initialization after suspend
drm/nouveau/fb: fix null derefs in nv49 and nv4e init
drm/i915: Invalidate TLBs for the rings after a reset
1) Revert Johannes Berg's genetlink locking fix, because it causes
regressions.
Johannes and Pravin Shelar are working on fixing things properly.
2) Do not drop ipv6 ICMP messages without a redirected header option,
they are legal. From Duan Jiong.
3) Missing error return propagation in probing of via-ircc driver.
From Alexey Khoroshilov.
4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when
initializing, from Peter Wu.
5) realtek phy driver programs wrong interrupt status bit, from
Giuseppe CAVALLARO.
6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn.
7) Bridge code uses wrong bitmap length, from Toshiaki Makita.
8) SFC driver uses wrong indexes to look up MAC filters, from Ben
Hutchings.
9) Don't pass stack buffers into usb control operations in hso driver,
from Daniel Gimpelevich.
10) Multiple ipv6 fragmentation headers in one packet is illegal and
such packets should be dropped, from Hannes Frederic Sowa.
11) When TCP sockets are "repaired" as part of checkpoint/restart, the
timestamp field of SKBs need to be refreshed otherwise RTOs can be
wildly off. From Andrey Vagin.
12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in
hostp driver. From Dan Carpenter.
13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes
it does. From Dan Carpenter.
14) Fix regression in wireless SME disconnects, from Johannes Berg.
15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from
Jussi Kivilinna.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
ipv4: expose IPV4_DEVCONF
ipv6: handle Redirect ICMP Message with no Redirected Header option
be2net: fix disabling TX in be_close()
Revert "genetlink: fix family dump race"
hso: Fix stack corruption on some architectures
hso: Earlier catch of error condition
sfc: Fix lookup of default RX MAC filters when steered using ethtool
bridge: Use the correct bit length for bitmap functions in the VLAN code
packet: restore packet statistics tp_packets to include drops
net: phy: rtl8211: fix interrupt on status link change
r8169: remember WOL preferences on driver load
via-ircc: don't return zero if via_ircc_open() failed
macvtap: Ignore tap features when VNET_HDR is off
macvtap: Correctly set tap features when IFF_VNET_HDR is disabled.
macvtap: simplify usage of tap_features
tcp: set timestamps for restored skb-s
bnx2x: set VF DMAE when first function has 0 supported VFs
bnx2x: Protect against VFs' ndos when SR-IOV is disabled
bnx2x: prevent VF benign attentions
bnx2x: Consider DCBX remote error
...
Linus Torvalds [Fri, 23 Aug 2013 16:52:32 +0000 (09:52 -0700)]
Merge branch 'akpm' (patches from Andrew Morton)
Merge fixes from Andrew Morton:
"A few fixes. One is a licensing change and I don't do licensing, so
please eyeball that one"
Licensing eye-balled.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib/lz4: correct the LZ4 license
memcg: get rid of swapaccount leftovers
nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
drivers/platform/olpc/olpc-ec.c: initialise earlier
Richard Laager [Thu, 22 Aug 2013 23:35:47 +0000 (16:35 -0700)]
lib/lz4: correct the LZ4 license
The LZ4 code is listed as using the "BSD 2-Clause License".
Signed-off-by: Richard Laager <rlaager@wiktel.com> Acked-by: Kyungsik Lee <kyungsik.lee@lge.com> Cc: Chanho Min <chanho.min@lge.com> Cc: Richard Yao <ryao@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ The 2-clause BSD can be just converted into GPL, but that's rude and
pointless, so don't do it - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Thu, 22 Aug 2013 23:35:46 +0000 (16:35 -0700)]
memcg: get rid of swapaccount leftovers
The swapaccount kernel parameter without any values has been removed by
commit a2c8990aed5a ("memsw: remove noswapaccount kernel parameter") but
it seems that we didn't get rid of all the left overs.
Make sure that menuconfig help text and kernel-parameters.txt are clear
about value for the paramter and remove the stalled comment which is not
very much useful on its own.
Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Gergely Risko <gergely@risko.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
Fix the issue with improper counting number of flying bio requests for
BIO_EOPNOTSUPP error detection case.
The sb_nbio must be incremented exactly the same number of times as
complete() function was called (or will be called) because
nilfs_segbuf_wait() will call wail_for_completion() for the number of
times set to sb_nbio:
do {
wait_for_completion(&segbuf->sb_bio_event);
} while (--segbuf->sb_nbio > 0);
Two functions complete() and wait_for_completion() must be called the
same number of times for the same sb_bio_event. Otherwise,
wait_for_completion() will hang or leak.
nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
Remove double call of bio_put() in nilfs_end_bio_write() for the case of
BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter
and he suggests first version of the fix too.
Being a low-level component, various drivers (e.g. olpc-battery) assume
that it is ok to communicate with the OLPC Embedded Controller during
probe. Therefore the OLPC EC driver must be initialised before other
drivers try to use it. This was the case until it was recently moved
out of arch/x86 and restructured around commits ac2504151f5a ("Platform:
OLPC: turn EC driver into a platform_driver") and 85f90cf6ca56 ("x86:
OLPC: switch over to using new EC driver on x86").
Use arch_initcall so that olpc-ec is readied earlier, matching the
previous behaviour.
Fixes a regression introduced in Linux-3.6 where various drivers such as
olpc-battery and olpc-xo1-sci failed to load due to an inability to
communicate with the EC. The user-visible effect was a lack of battery
monitoring, missing ebook/lid switch input devices, etc.
Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Paul Fox <pgf@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IP sends device configuration (see inet_fill_link_af) as an array
in the netlink information, but the indices in that array are not
exposed to userspace through any current santized header file.
It was available back in 2.6.32 (in /usr/include/linux/sysctl.h)
but was broken by:
commit 02291680ffba92e5b5865bc0c5e7d1f3056b80ec
Author: Eric W. Biederman <ebiederm@xmission.com>
Date: Sun Feb 14 03:25:51 2010 +0000
net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers
Eric was solving the sysctl problem but then the indices were re-exposed
by a later addition of devconf support for IPV4
Duan Jiong [Thu, 22 Aug 2013 04:07:35 +0000 (12:07 +0800)]
ipv6: handle Redirect ICMP Message with no Redirected Header option
rfc 4861 says the Redirected Header option is optional, so
the kernel should not drop the Redirect Message that has no
Redirected Header option. In this patch, the function
ip6_redirect_no_header() is introduced to deal with that
condition.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Sathya Perla [Thu, 22 Aug 2013 06:53:41 +0000 (12:23 +0530)]
be2net: fix disabling TX in be_close()
commit fba875591 ("disable TX in be_close()") disabled TX in be_close()
to protect be_xmit() from touching freed up queues in the AER recovery
flow. But, TX must be disabled *before* cleaning up TX completions in
the close() path, not after. This allows be_tx_compl_clean() to free up
all TX-req skbs that were notified to the HW.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It turns out that the change introduced a potential deadlock
by causing a locking dependency with netlink's cb_mutex. I
can't seem to find a way to resolve this without doing major
changes to the locking, so revert this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 22 Aug 2013 20:04:11 +0000 (13:04 -0700)]
Merge branch 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86
Pull x86 platform driver fixes from Matthew Garrett:
"Three trivial fixes - the first reverts a patch that's broken some
other devices (again - I'm trying to figure out a clean way to
implement this), the other two fix minor issues in the sony-laptop
driver"
* 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86:
Revert "hp-wmi: Enable hotkeys on some systems"
sony-laptop: Fix reporting of gfx_switch_status
sony-laptop: return a negative error code in sonypi_compat_init()
Linus Torvalds [Thu, 22 Aug 2013 17:44:44 +0000 (10:44 -0700)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes for 3.11 are still trickling in. These are:
- A couple of fixes for older OMAP platforms
- Another few fixes for at91 (lateish due to European summer
vacations)
- A late-found problem with USB on Tegra, fix is to keep VBUS
regulator on at all times
- One fix for Exynos 5440 dealing with CPU detection
- One MAINTAINERS update"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: tegra: always enable USB VBUS regulators
ARM: davinci: nand: specify ecc strength
ARM: OMAP: rx51: change musb mode to OTG
ARM: OMAP2: fix musb usage for n8x0
MAINTAINERS: Update email address for Benoit Cousson
ARM: at91/DT: fix at91sam9n12ek memory node
ARM: at91: add missing uart clocks DT entries
ARM: SAMSUNG: fix to support for missing cpu specific map_io
ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C
Linus Torvalds [Thu, 22 Aug 2013 17:43:47 +0000 (10:43 -0700)]
Merge tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linux
Pull device tree fix from Rob Herring:
"For DT unflattening, add missing memory initialization.
This is needed for arches like PPC that use memblock_alloc. This
appears to have been an issue for some time, but is a somewhat limited
usecase of OF_DYNAMIC"
* tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linux:
of: fdt: fix memory initialization for expanded DT
Linus Torvalds [Thu, 22 Aug 2013 17:43:00 +0000 (10:43 -0700)]
Merge tag 'dm-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"A patch to fix dm-cache-policy-mq's remove_mapping() conflict with
sparc32"
* tag 'dm-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: avoid conflicting remove_mapping() in mq policy
Radu Caragea [Wed, 21 Aug 2013 17:55:59 +0000 (20:55 +0300)]
x86 get_unmapped_area: Access mmap_legacy_base through mm_struct member
This is the updated version of df54d6fa5427 ("x86 get_unmapped_area():
use proper mmap base for bottom-up direction") that only randomizes the
mmap base address once.
Signed-off-by: Radu Caragea <sinaelgl@gmail.com> Reported-and-tested-by: Jeff Shorey <shoreyjeff@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Adrian Sendroiu <molecula2788@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The commit isn't necessarily wrong, but because it recalculates the
random mmap_base every time, it seems to confuse user memory allocators
that expect contiguous mmap allocations even when the mmap address isn't
specified.
In particular, the MATLAB Java runtime seems to be unhappy. See
https://bugzilla.kernel.org/show_bug.cgi?id=60774
So we'll want to apply the random offset only once, and Radu has a patch
for that. Revert this older commit in order to apply the other one.
Reported-by: Jeff Shorey <shoreyjeff@gmail.com> Cc: Radu Caragea <sinaelgl@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Warren [Tue, 20 Aug 2013 20:00:13 +0000 (14:00 -0600)]
ARM: tegra: always enable USB VBUS regulators
This fixes a regression exposed during the merge window by commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT"; namely that
USB VBUS doesn't get turned on, so USB devices are not detected. This
affects the internal USB port on TrimSlice (i.e. the USB->SATA bridge, to
which the SSD is connected) and the external port(s) on Seaboard/
Springbank and Whistler.
The Tegra DT as written in v3.11 allows two paths to enable USB VBUS:
1) Via the legacy DT binding for the USB controller; it can directly
acquire a VBUS GPIO and activate it.
2) Via a regulator for VBUS, which is referenced by the new DT binding
for the USB controller.
Those two methods both use the same GPIO, and hence whichever of the
USB controller and regulator gets probed first ends up owning the GPIO.
In practice, the USB driver only supports path (1) above, since the
patches to support the new USB binding are not present until v3.12:-(
In practice, the regulator ends up being probed first and owning the
GPIO. Since nothing enables the regulator (the USB driver code is not
yet present), the regulator ends up being turned off. This originally
caused no problem, because the polarity in the regulator definition was
incorrect, so attempting to turn off the regulator actually turned it
on, and everything worked:-(
However, when testing the new USB driver code in v3.12, I noticed the
incorrect polarity and fixed it in commit 9f310de "ARM: tegra: fix VBUS
regulator GPIO polarity in DT". In the context of v3.11, this patch then
caused the USB VBUS to actually turn off, which broke USB ports with VBUS
control. I got this patch included in v3.11-rc1 since it fixed a bug in
device tree (incorrect polarity specification), and hence was suitable to
be included early in the rc series. I evidently did not test the patch at
all, or correctly, in the context of v3.11, and hence did not notice the
issue that I have explained above:-(
Fix this by making the USB VBUS regulators always enabled. This way, if
the regulator owns the GPIO, it will always be turned on, even if there
is no USB driver code to request the regulator be turned on. Even
ignoring this bug, this is a reasonable way to configure the HW anyway.
If this patch is applied to v3.11, it will cause a couple pretty trivial
conflicts in tegra20-{trimslice,seaboard}.dts when creating v3.12, since
the context right above the added lines changed in patches destined for
v3.12.
Reported-by: Kyle McMartin <kmcmarti@redhat.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
As Sergei Shtylyov explained in the #mipslinux IRC channel:
[Mon 2013-08-19 12:28:21 PM PDT] <headless> guys, are you sure it's not "DMA off stack" case?
[Mon 2013-08-19 12:28:35 PM PDT] <headless> it's a known stack corruptor on non-coherent arches
[Mon 2013-08-19 12:31:48 PM PDT] <DonkeyHotei> headless: for usb/ehci?
[Mon 2013-08-19 12:34:11 PM PDT] <DonkeyHotei> headless: explain
[Mon 2013-08-19 12:35:38 PM PDT] <headless> usb_control_msg() (or other such func) should not use buffer on stack. DMA from/to stack is prohibited
[Mon 2013-08-19 12:35:58 PM PDT] <headless> and EHCI uses DMA on control xfers (as well as all the others)
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to get an interface specification if we know it's the
wrong one.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Wladislav Wiebe [Mon, 12 Aug 2013 11:06:53 +0000 (13:06 +0200)]
of: fdt: fix memory initialization for expanded DT
Already existing property flags are filled wrong for properties created from
initial FDT. This could cause problems if this DYNAMIC device-tree functions
are used later, i.e. properties are attached/detached/replaced. Simply dumping
flags from the running system show, that some initial static (not allocated via
kzmalloc()) nodes are marked as dynamic.
I putted some debug extensions to property_proc_show(..) :
..
+ if (OF_IS_DYNAMIC(pp))
+ pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n");
+ if (OF_IS_DETACHED(pp))
+ pr_err("DEBUG: xxx : OF_IS_DETACHED\n");
when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you
will see that those flags are filled wrong, basically in most cases it will dump
a DYNAMIC or DETACHED status, which is in not true.
(BTW. this OF_IS_DETACHED is a own define for debug purposes which which just
make a test_bit(OF_DETACHED, &x->_flags)
If nodes are dynamic kernel is allowed to kfree() them. But it will crash
attempting to do so on the nodes from FDT -- they are not allocated via
kzmalloc().
Signed-off-by: Wladislav Wiebe <wladislav.kw@gmail.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Some Poulsbo cards seem to incorrectly report SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED instead of SDVO_CMD_STATUS_PENDING, which causes the display to be turned off.
Linus Torvalds [Wed, 21 Aug 2013 23:38:33 +0000 (16:38 -0700)]
Merge tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
- On ARM did not have balanced calls to get/put_cpu.
- Fix to make tboot + Xen + Linux correctly.
- Fix events VCPU binding issues.
- Fix a vCPU online race where IPIs are sent to not-yet-online vCPU.
* tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/smp: initialize IPI vectors before marking CPU online
xen/events: mask events when changing their VCPU binding
xen/events: initialize local per-cpu mask for all possible events
x86/xen: do not identity map UNUSABLE regions in the machine E820
xen/arm: missing put_cpu in xen_percpu_init
Linus Torvalds [Wed, 21 Aug 2013 23:37:14 +0000 (16:37 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fix from Ralf Baechle:
"Just a single patch which fixes a special case in the MIPS FPU
emulator which is always required, even on CPUs with FPU. There is
the rare special case that an FPU (or certain other instructions) in a
branch delay slot is causing an exception and then the branch
instruction will need to be emulated by the kernel before resuming
execution. This is working great except if the branch instruction is
an Octeon BBIT instruction.
The boring disclaimer - all MIPS defconfigs build tested and no
regressions and runtime tested on Octeon, no known issues"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Handle OCTEON BBIT instructions in FPU emulator.
Linus Torvalds [Wed, 21 Aug 2013 23:36:32 +0000 (16:36 -0700)]
Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 perf fixes from Catalin Marinas:
"Perf backend fixes for arm64 where the user can cause kernel panic
(discovered with Vince's fuzzing tool)"
* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: perf: fix event validation for software group leaders
arm64: perf: fix array out of bounds access in armpmu_map_hw_event()
Linus Torvalds [Wed, 21 Aug 2013 23:35:37 +0000 (16:35 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fixes for ARM and aarch64.
This pull request is coming a bit later than I would have preferred,
because I and Gleb happened to have holidays around the same weeks of
August... sorry about that"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ARM: Squash len warning
arm64: KVM: use 'int' instead of 'u32' for variable 'target' in kvm_host.h.
arm64: KVM: add missing dsb before invalidating Stage-2 TLBs
arm64: KVM: perform save/restore of PAR_EL1
arm64: KVM: fix 2-level page tables unmapping
ARM: KVM: Fix unaligned unmap_range leak
ARM: KVM: Fix 64-bit coprocessor handling
Linus Torvalds [Wed, 21 Aug 2013 23:33:37 +0000 (16:33 -0700)]
Merge tag 'pinctrl-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl fixes from Linus Walleij:
"Fixes for the sunxi (AllWinner) pin control driver. This was a new
driver in this merge window, so some post-merge hardening is
happening"
[ I had completely missed this pull request for some reason, it was sent
over a week ago but my mailbox is chaotic ]
* tag 'pinctrl-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: Add spinlocks
pinctrl: sunxi: Fix gpio_set behaviour
pinctrl: sunxi: Read register before writing to it in irq_set_type
Ben Hutchings [Tue, 9 Jul 2013 16:12:49 +0000 (17:12 +0100)]
sfc: Fix lookup of default RX MAC filters when steered using ethtool
commit 385904f819e3 ('sfc: Don't use
efx_filter_{build,hash,increment}() for default MAC filters') used the
wrong name to find the index of default RX MAC filters at insertion/
update time. This could result in memory corruption and would in any
case silently fail to update the filter.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Toshiaki Makita [Tue, 20 Aug 2013 08:10:18 +0000 (17:10 +0900)]
bridge: Use the correct bit length for bitmap functions in the VLAN code
The VLAN code needs to know the length of the per-port VLAN bitmap to
perform its most basic operations (retrieving VLAN informations, removing
VLANs, forwarding database manipulation, etc). Unfortunately, in the
current implementation we are using a macro that indicates the bitmap
size in longs in places where the size in bits is expected, which in
some cases can cause what appear to be random failures.
Use the correct macro.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
Pali Rohár [Fri, 16 Aug 2013 12:57:07 +0000 (14:57 +0200)]
drm/nouveau: fix reclocking on nv40
In commit 77145f1cbdf8d28b46ff8070ca749bad821e0774 was introduced
error which cause that reclocking on nv40 not working anymore.
There is missing assigment of return value from pll_calc to ret.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Fri, 9 Aug 2013 21:25:54 +0000 (17:25 -0400)]
drm/nouveau/fb: fix null derefs in nv49 and nv4e init
Commit dceef5d87 (drm/nouveau/fb: initialise vram controller as pfb
sub-object) moved some code around and introduced these null derefs.
pfb->ram is set to the new ram object outside of this ctor.
Reported-by: Ronald Uitermark <ronald645@gmail.com> Tested-by: Ronald Uitermark <ronald645@gmail.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
David S. Miller [Wed, 21 Aug 2013 00:25:55 +0000 (17:25 -0700)]
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
Regarding the iwlwifi bits, Johannes says:
"We revert an rfkill bugfix that unfortunately caused more bugs, shuffle
some code to avoid touching the PCIe device before it's enabled and
disconnect if firmware fails to do our bidding. I also have Stanislaw's
fix to not crash in some channel switch scenarios."
As for the mac80211 bits, Johannes says:
"This time, I have one fix from Dan Carpenter for users of
nl80211hdr_put(), and one fix from myself fixing a regression with the
libertas driver."
Along with the above...
Dan Carpenter fixes some incorrectly placed "address of" operators
in hostap that caused copying of junk data.
Jussi Kivilinna corrects zd1201 to use an allocated buffer rather
than the stack for a URB operation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Mon, 19 Aug 2013 20:40:22 +0000 (16:40 -0400)]
packet: restore packet statistics tp_packets to include drops
getsockopt PACKET_STATISTICS returns tp_packets + tp_drops. Commit ee80fbf301 ("packet: account statistics only in tpacket_stats_u")
cleaned up the getsockopt PACKET_STATISTICS code.
This also changed semantics. Historically, tp_packets included
tp_drops on return. The commit removed the line that adds tp_drops
into tp_packets.
This patch reinstates the old semantics.
Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: rtl8211: fix interrupt on status link change
This is to fix a problem in the rtl8211 where the driver
wasn't properly enabled the interrupt on link change status.
it has to enable the ineterrupt on the bit 10 in the register 18
(INER).
Reported-by: Sharma Bhupesh <B45370@freescale.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Wu [Sat, 17 Aug 2013 09:00:02 +0000 (11:00 +0200)]
r8169: remember WOL preferences on driver load
Do not clear Broadcast/Multicast/Unicast Wake Flag or LanWake in
Config5. This is necessary to preserve WOL state when the driver is
loaded. Although the r8168 vendor driver does not write Config5 (it has
been commented out), Hayes Wang from Realtek said that masking bits like
this is more sensible.
Signed-off-by: Peter Wu <lekensteyn@gmail.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
via-ircc: don't return zero if via_ircc_open() failed
If via_ircc_open() fails, data structures of the driver left uninitialized,
but probe (via_init_one()) returns zero. That can lead to null pointer dereference
in via_remove_one(), since it does not check drvdata for NULL.
The patch implements proper error code propagation.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Fri, 16 Aug 2013 19:25:02 +0000 (15:25 -0400)]
macvtap: Ignore tap features when VNET_HDR is off
When the user turns off VNET_HDR support on the
macvtap device, there is no way to provide any
offload information to the user. So, it's safer
to ignore offload setting then depend on the user
setting them correctly.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Fri, 16 Aug 2013 19:25:01 +0000 (15:25 -0400)]
macvtap: Correctly set tap features when IFF_VNET_HDR is disabled.
When the user turns off IFF_VNET_HDR flag, attempts to change
offload features via TUNSETOFFLOAD do not work. This could cause
GSO packets to be delivered to the user when the user is
not prepared to handle them.
To solve, allow processing of TUNSETOFFLOAD when IFF_VNET_HDR is
disabled.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Fri, 16 Aug 2013 19:25:00 +0000 (15:25 -0400)]
macvtap: simplify usage of tap_features
In macvtap, tap_features specific the features of that the user
has specified via ioctl(). If we treat macvtap as a macvlan+tap
then we could all the tap a pseudo-device and give it other features
like SG and GSO. Then we can stop using the features of lower
device (macvlan) when forwarding the traffic the tap.
This solves the issue of possible checksum offload mismatch between
tap feature and macvlan features.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Vagin [Fri, 16 Aug 2013 15:04:36 +0000 (19:04 +0400)]
tcp: set timestamps for restored skb-s
When the repair mode is turned off, the write queue seqs are
updated so that the whole queue is considered to be 'already sent.
The "when" field must be set for such skb. It's used in tcp_rearm_rto
for example. If the "when" field isn't set, the retransmit timeout can
be calculated incorrectly and a tcp connected can stop for two minutes
(TCP_RTO_MAX).
Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Chuck Anderson [Tue, 6 Aug 2013 22:12:19 +0000 (15:12 -0700)]
xen/smp: initialize IPI vectors before marking CPU online
An older PVHVM guest (v3.0 based) crashed during vCPU hot-plug with:
kernel BUG at drivers/xen/events.c:1328!
RCU has detected that a CPU has not entered a quiescent state within the
grace period. It needs to send the CPU a reschedule IPI if it is not
offline. rcu_implicit_offline_qs() does this check:
/*
* If the CPU is offline, it is in a quiescent state. We can
* trust its state not to change because interrupts are disabled.
*/
if (cpu_is_offline(rdp->cpu)) {
rdp->offline_fqs++;
return 1;
}
Else the CPU is online. Send it a reschedule IPI.
The CPU is in the middle of being hot-plugged and has been marked online
(!cpu_is_offline()). See start_secondary():
start_secondary() then waits for the CPU bringing up the hot-plugged CPU to
mark it as active:
/*
* Wait until the cpu which brought this one up marked it
* online before enabling interrupts. If we don't do that then
* we can end up waking up the softirq thread before this cpu
* reached the active state, which makes the scheduler unhappy
* and schedule the softirq thread on the wrong cpu. This is
* only observable with forced threaded interrupts, but in
* theory it could also happen w/o them. It's just way harder
* to achieve.
*/
while (!cpumask_test_cpu(smp_processor_id(), cpu_active_mask))
cpu_relax();
/* enable local interrupts */
local_irq_enable();
The CPU being hot-plugged will be marked active after it has been fully
initialized by the CPU managing the hot-plug. In the Xen PVHVM case
xen_smp_intr_init() is called to set up the hot-plugged vCPU's
XEN_RESCHEDULE_VECTOR.
The hot-plugging CPU is marked online, not marked active and does not have
its IPI vectors set up. rcu_implicit_offline_qs() sees the hot-plugging
cpu is !cpu_is_offline() and tries to send it a reschedule IPI:
This will lead to:
clocksource_watchdog() uses cpu_online_mask to pick the next CPU to handle
a watchdog timer:
/*
* Cycle through CPUs to check if the CPUs stay synchronized
* to each other.
*/
next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask);
if (next_cpu >= nr_cpu_ids)
next_cpu = cpumask_first(cpu_online_mask);
watchdog_timer.expires += WATCHDOG_INTERVAL;
add_timer_on(&watchdog_timer, next_cpu);
This resulted in an attempt to send an IPI to a hot-plugging CPU that
had not initialized its reschedule vector. One option would be to make
the RCU code check to not check for CPU offline but for CPU active.
As becoming active is done after a CPU is online (in older kernels).
But Srivatsa pointed out that "the cpu_active vs cpu_online ordering has been
completely reworked - in the online path, cpu_active is set *before* cpu_online,
and also, in the cpu offline path, the cpu_active bit is reset in the CPU_DYING
notification instead of CPU_DOWN_PREPARE." Drilling in this the bring-up
path: "[brought up CPU].. send out a CPU_STARTING notification, and in response
to that, the scheduler sets the CPU in the cpu_active_mask. Again, this mask
is better left to the scheduler alone, since it has the intelligence to use it
judiciously."
The conclusion was that:
"
1. At the IPI sender side:
It is incorrect to send an IPI to an offline CPU (cpu not present in
the cpu_online_mask). There are numerous places where we check this
and warn/complain.
2. At the IPI receiver side:
It is incorrect to let the world know of our presence (by setting
ourselves in global bitmasks) until our initialization steps are complete
to such an extent that we can handle the consequences (such as
receiving interrupts without crashing the sender etc.)
" (from Srivatsa)
As the native code enables the interrupts at some point we need to be
able to service them. In other words a CPU must have valid IPI vectors
if it has been marked online.
It doesn't need to handle the IPI (interrupts may be disabled) but needs
to have valid IPI vectors because another CPU may find it in cpu_online_mask
and attempt to send it an IPI.
This patch will change the order of the Xen vCPU bring-up functions so that
Xen vectors have been set up before start_secondary() is called.
It also will not continue to bring up a Xen vCPU if xen_smp_intr_init() fails
to initialize it.
Orabug 13823853
Signed-off-by Chuck Anderson <chuck.anderson@oracle.com> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
David Vrabel [Thu, 15 Aug 2013 12:21:07 +0000 (13:21 +0100)]
xen/events: mask events when changing their VCPU binding
When a event is being bound to a VCPU there is a window between the
EVTCHNOP_bind_vpcu call and the adjustment of the local per-cpu masks
where an event may be lost. The hypervisor upcalls the new VCPU but
the kernel thinks that event is still bound to the old VCPU and
ignores it.
There is even a problem when the event is being bound to the same VCPU
as there is a small window beween the clear_bit() and set_bit() calls
in bind_evtchn_to_cpu(). When scanning for pending events, the kernel
may read the bit when it is momentarily clear and ignore the event.
Avoid this by masking the event during the whole bind operation.
Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> CC: stable@vger.kernel.org
David Vrabel [Thu, 15 Aug 2013 12:21:06 +0000 (13:21 +0100)]
xen/events: initialize local per-cpu mask for all possible events
The sizeof() argument in init_evtchn_cpu_bindings() is incorrect
resulting in only the first 64 (or 32 in 32-bit guests) ports having
their bindings being initialized to VCPU 0.
In most cases this does not cause a problem as request_irq() will set
the irq affinity which will set the correct local per-cpu mask.
However, if the request_irq() is called on a VCPU other than 0, there
is a window between the unmasking of the event and the affinity being
set were an event may be lost because it is not locally unmasked on
any VCPU. If request_irq() is called on VCPU 0 then local irqs are
disabled during the window and the race does not occur.
Fix this by initializing all NR_EVENT_CHANNEL bits in the local
per-cpu masks.
Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: stable@vger.kernel.org
David Vrabel [Fri, 16 Aug 2013 14:42:55 +0000 (15:42 +0100)]
x86/xen: do not identity map UNUSABLE regions in the machine E820
If there are UNUSABLE regions in the machine memory map, dom0 will
attempt to map them 1:1 which is not permitted by Xen and the kernel
will crash.
There isn't anything interesting in the UNUSABLE region that the dom0
kernel needs access to so we can avoid making the 1:1 mapping and
treat it as RAM.
We only do this for dom0, as that is where tboot case shows up.
A PV domU could have an UNUSABLE region in its pseudo-physical map
and would need to be handled in another patch.
This fixes a boot failure on hosts with tboot.
tboot marks a region in the e820 map as unusable and the dom0 kernel
would attempt to map this region and Xen does not permit unusable
regions to be mapped by guests.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[v1: Altered the patch and description with domU's with UNUSABLE regions] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Will Deacon [Tue, 20 Aug 2013 10:47:40 +0000 (11:47 +0100)]
arm64: perf: fix event validation for software group leaders
This is a port of c95eb3184ea1 ("ARM: 7809/1: perf: fix event validation
for software group leaders") to arm64, which fixes a panic in the arm64
perf backend found as a result of Vince's fuzzing tool.
Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Will Deacon [Tue, 20 Aug 2013 10:47:39 +0000 (11:47 +0100)]
arm64: perf: fix array out of bounds access in armpmu_map_hw_event()
This is a port of d9f966357b14 ("ARM: 7810/1: perf: Fix array out of
bounds access in armpmu_map_hw_event()") to arm64, which fixes an oops
in the arm64 perf backend found as a result of Vince's fuzzing tool.
Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ariel Elior [Mon, 19 Aug 2013 06:12:01 +0000 (09:12 +0300)]
bnx2x: set VF DMAE when first function has 0 supported VFs
There are possible HW configurations in which PFs will have SR-IOV capability
but will have Max VFs set to 0 - this happens when there are Multi-Function
devices where the VFs are allocated to only some of the PFs.
DMAE is configured to support VFs only if the configuring PF has supported VFs.
In case the first PF to be loaded will be one without supported VFs, it will
not configure DMAE to the VF-supporting mode. When VFs of other PFs will be
loaded later on, they will not be able to communicate with their PF.
This changes the requirement for configuring DMAE for VF-supporting mode;
If the device has SR-IOV capabilities there must be some PF that has
max supported VFs > 0, thus it will configure the DMAE for supporting VFs.
Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Mon, 19 Aug 2013 06:12:00 +0000 (09:12 +0300)]
bnx2x: Protect against VFs' ndos when SR-IOV is disabled
Since SR-IOV can be activated dynamically and iproute2 can be called
asynchronously, the various callbacks need a robust sanity check before
attempting to access the SR-IOV database and members since there are numerous
states in which it can find the driver (e.g., PF is down, sriov was not enabled
yet, VF is down, etc.).
In many of the states the callback result will be null pointer dereference.
Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Kravkov [Mon, 19 Aug 2013 06:11:58 +0000 (09:11 +0300)]
bnx2x: Consider DCBX remote error
When publishing information via getfeatcfg(), bnx2x driver didn't consider
remote errors (e.g., switch that doesn't support DCBX) when setting the
error flags.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Kravkov [Mon, 19 Aug 2013 06:11:57 +0000 (09:11 +0300)]
bnx2x: Change DCB context handling
After notification that DCBX configuration has ended arrived to the driver,
the driver configured the FW/HW in sleepless context.
As a result, it was possible to reach a race (mostly with CNIC registration)
in which the configuration will return a timeout, failing to set the DCBX
results correctly.
This patch moves the configuration following the DCBX end into the slowpath
RTNL task (i.e., sleepless context protected by the RTNL lock), allowing the
configuration to cope with such races.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Kravkov [Mon, 19 Aug 2013 06:11:56 +0000 (09:11 +0300)]
bnx2x: dropless flow control not always functional
Since commit 3deb816 "bnx2x: Add a periodic task for link PHY events"
link state changes can be detected not only via the attention flow but also
from the periodic task.
If the link state will change in such a manner (i.e., via the periodic task),
dropless flow-control will not be configured.
This patch remedies the issue, adding the missing configuration to all required
flows.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: drop packets with multiple fragmentation headers
It is not allowed for an ipv6 packet to contain multiple fragmentation
headers. So discard packets which were already reassembled by
fragmentation logic and send back a parameter problem icmp.
The updates for RFC 6980 will come in later, I have to do a bit more
research here.
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: remove max_addresses check from ipv6_create_tempaddr
Because of the max_addresses check attackers were able to disable privacy
extensions on an interface by creating enough autoconfigured addresses:
<http://seclists.org/oss-sec/2012/q4/292>
But the check is not actually needed: max_addresses protects the
kernel to install too many ipv6 addresses on an interface and guards
addrconf_prefix_rcv to install further addresses as soon as this limit
is reached. We only generate temporary addresses in direct response of
a new address showing up. As soon as we filled up the maximum number of
addresses of an interface, we stop installing more addresses and thus
also stop generating more temp addresses.
Even if the attacker tries to generate a lot of temporary addresses
by announcing a prefix and removing it again (lifetime == 0) we won't
install more temp addresses, because the temporary addresses do count
to the maximum number of addresses, thus we would stop installing new
autoconfigured addresses when the limit is reached.
This patch fixes CVE-2013-0343 (but other layer-2 attacks are still
possible).
Thanks to Ding Tianhong to bring this topic up again.
Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: George Kargiotakis <kargig@void.gr> Cc: P J P <ppandit@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 19 Aug 2013 23:26:12 +0000 (16:26 -0700)]
proc: more readdir conversion bug-fixes
In the previous commit, Richard Genoud fixed proc_root_readdir(), which
had lost the check for whether all of the non-process /proc entries had
been returned or not.
But that in turn exposed _another_ bug, namely that the original readdir
conversion patch had yet another problem: it had lost the return value
of proc_readdir_de(), so now checking whether it had completed
successfully or not didn't actually work right anyway.
This reinstates the non-zero return for the "end of base entries" that
had also gotten lost in commit f0c3b5093add ("[readdir] convert
procfs"). So now you get all the base entries *and* you get all the
process entries, regardless of getdents buffer size.
(Side note: the Linux "getdents" manual page actually has a nice example
application for testing getdents, which can be easily modified to use
different buffers. Who knew? Man-pages can be useful)
Reported-by: Emmanuel Benisty <benisty.e@gmail.com> Reported-by: Marc Dionne <marc.c.dionne@gmail.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Richard Genoud [Mon, 19 Aug 2013 16:30:31 +0000 (18:30 +0200)]
proc: return on proc_readdir error
Commit f0c3b5093add ("[readdir] convert procfs") introduced a bug on the
listing of the proc file-system. The return value of proc_readdir()
isn't tested anymore in the proc_root_readdir function.
This lead to an "interesting" behaviour when we are using the getdents()
system call with a buffer too small: instead of failing, it returns the
first entries of /proc (enough to fill the given buffer), plus the PID
directories.
This is not triggered on glibc (as getdents is called with a 32KB
buffer), but on uclibc, the buffer size is only 1KB, thus some proc
entries are missing.
See https://lkml.org/lkml/2013/8/12/288 for more background.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull gfs2 fixes from Steven Whitehouse:
"Out of these five patches, the one for ensuring that the number of
revokes is not exceeded, and the one for checking the glock is not
already held in gfs2_getxattr are the two most important. The latter
can be triggered by selinux.
The other three patches are very small and fix mostly fairly trivial
issues"
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
GFS2: Check for glock already held in gfs2_getxattr
GFS2: alloc_workqueue() doesn't return an ERR_PTR
GFS2: don't overrun reserved revokes
GFS2: WQ_NON_REENTRANT is meaningless and going away
GFS2: Fix typo in gfs2_create_inode()
Linus Torvalds [Mon, 19 Aug 2013 16:18:29 +0000 (09:18 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two AMD microcode loader fixes and an OLPC firmware support fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode, AMD: Fix early microcode loading
x86, microcode, AMD: Make cpu_has_amd_erratum() use the correct struct cpuinfo_x86
x86: Don't clear olpc_ofw_header when sentinel is detected
Linus Torvalds [Mon, 19 Aug 2013 16:17:35 +0000 (09:17 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Three small fixlets"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz: fix compile warning in tick_nohz_init()
nohz: Do not warn about unstable tsc unless user uses nohz_full
sched_clock: Fix integer overflow
Randy Dunlap [Mon, 19 Aug 2013 03:08:07 +0000 (20:08 -0700)]
kernel: fix new kernel-doc warning in wait.c
Fix new kernel-doc warnings in kernel/wait.c:
Warning(kernel/wait.c:374): No description found for parameter 'p'
Warning(kernel/wait.c:374): Excess function parameter 'word' description in 'wake_up_atomic_t'
Warning(kernel/wait.c:374): Excess function parameter 'bit' description in 'wake_up_atomic_t'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GFS2: Check for glock already held in gfs2_getxattr
Since the introduction of atomic_open, gfs2_getxattr can be
called with the glock already held, so we need to allow for
this.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: David Teigland <teigland@redhat.com> Tested-by: David Teigland <teigland@redhat.com>
When run during fsync, a gfs2_log_flush could happen between the
time when gfs2_ail_flush checked the number of blocks to revoke,
and when it actually started the transaction to do those revokes.
This occassionally caused it to need more revokes than it reserved,
causing gfs2 to crash.
Instead of just reserving enough revokes to handle the blocks that
currently need them, this patch makes gfs2_ail_flush reserve the
maximum number of revokes it can, without increasing the total number
of reserved log blocks. This patch also passes the number of reserved
revokes to __gfs2_ail_flush() so that it doesn't go over its limit
and cause a crash like we're seeing. Non-fsync calls to __gfs2_ail_flush
will still cause a BUG() necessary revokes are skipped.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Dave Airlie [Mon, 19 Aug 2013 03:49:20 +0000 (13:49 +1000)]
Merge tag 'drm-intel-fixes-2013-08-15' of git://people.freedesktop.org/~danvet/drm-intel
* tag 'drm-intel-fixes-2013-08-15' of git://people.freedesktop.org/~danvet/drm-intel: (153 commits)
drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck code
Daniel Vetter [Thu, 8 Aug 2013 07:10:37 +0000 (09:10 +0200)]
drm/i915: unpin backing storage in dmabuf_unmap
This fixes a WARN in i915_gem_free_object when the
obj->pages_pin_count isn't 0.
v2: Add locking to unmap, noticed by Chris Wilson. Note that even
though we call unmap with our own dev->struct_mutex held that won't
result in an immediate deadlock since we never go through the dma_buf
interfaces for our own, reimported buffers. But it's still easy to
blow up and anger lockdep, but that's already the case with our ->map
implementation. Fixing this for real will involve per dma-buf ww mutex
locking by the callers. And lots of fun. So go with the duct-tape
approach for now.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Tested-by: Armin K. <krejzi@email.com> (v1) Tested-by: Dave Airlie <airlied@redhat.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
Dave Airlie [Mon, 19 Aug 2013 02:55:50 +0000 (12:55 +1000)]
Merge branch 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux
Just two small fixes for radeon. One fixes an array overrun
that can cause garbage to get written to registers on some r7xx boards,
the other is a small UVD fix.
Also one audio regresion
* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix WREG32_OR macro setting bits in a register
drm/radeon/r7xx: fix copy paste typo in golden register setup
drm/radeon: fix UVD message buffer validation
Chris Wilson [Tue, 6 Aug 2013 18:01:14 +0000 (19:01 +0100)]
drm/i915: Invalidate TLBs for the rings after a reset
After any "soft gfx reset" we must manually invalidate the TLBs
associated with each ring. Empirically, it seems that a
suspend/resume or D3-D0 cycle count as a "soft reset". The symptom is
that the hardware would fail to note the new address for its status
page, and so it would continue to write the shadow registers and
breadcrumbs into the old physical address (now used by something
completely different, scary). Whereas the driver would read the new
status page and never see any progress, it would appear that the GPU
hung immediately upon resume.
Based on a patch by naresh kumar kachhi <naresh.kumar.kacchi@intel.com>
Reported-by: Thiago Macieira <thiago@kde.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64725 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thiago Macieira <thiago@kde.org> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Linus Torvalds [Sun, 18 Aug 2013 15:51:28 +0000 (08:51 -0700)]
Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"This contains one patch to fix the return value of cpuset's cgroups
interface function, which used to always return -ENODEV for the writes
on the 'memory_pressure_enabled' file"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: fix the return value of cpuset_write_u64()
Linus Torvalds [Sat, 17 Aug 2013 17:43:19 +0000 (10:43 -0700)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull jbd2 bug fixes from Ted Ts'o:
"Two jbd2 bug fixes, one of which is a regression fix"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: Fix oops in jbd2_journal_file_inode()
jbd2: Fix use after free after error in jbd2_journal_dirty_metadata()
Guenter Roeck [Sat, 17 Aug 2013 03:50:55 +0000 (20:50 -0700)]
s390: Fix broken build
Fix this build error:
In file included from fs/exec.c:61:0:
arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned'
arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default]
arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu':
arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end'
Broken due to commit 2b047252d0 ("Fix TLB gather virtual address range
invalidation corner cases").
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ Oh well. We had build testing for ppc amd um, but no s390 - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robin Holt [Fri, 16 Aug 2013 23:01:42 +0000 (18:01 -0500)]
MAINTAINERS: Change ownership for SGI specific modules.
I have taken a different job. I am removing myself as maintainer of
GRU. Dimitri will continue to maintain the SGI GRU driver, changing the
XP/XPC/XPNET maintainer to Cliff Whickman, but leaving behind my
personal email address to answer any questions about the design or
operation of the XP family of drivers.
Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Sat, 17 Aug 2013 01:19:41 +0000 (21:19 -0400)]
jbd2: Fix oops in jbd2_journal_file_inode()
Commit 0713ed0cde76438d05849f1537d3aab46e099475 added
jbd2_journal_file_inode() call into ext4_block_zero_page_range().
However that function gets called from truncate path and thus inode
needn't have jinode attached - that happens in ext4_file_open() but
the file needn't be ever open since mount. Calling
jbd2_journal_file_inode() without jinode attached results in the oops.
We fix the problem by attaching jinode to inode also in ext4_truncate()
and ext4_punch_hole() when we are going to zero out partial blocks.
Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Linus Torvalds [Fri, 16 Aug 2013 23:52:29 +0000 (16:52 -0700)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
"The usual collection of random fixes. Also some further fixes to the
last set of security fixes, and some more from Will (which you may
already have in a slightly different form)"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7807/1: kexec: validate CPU hotplug support
ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock
ARM: 7811/1: locks: use early clobber in arch_spin_trylock
ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event()
ARM: 7809/1: perf: fix event validation for software group leaders
ARM: Fix FIQ code on VIVT CPUs
ARM: Fix !kuser helpers case
ARM: Fix the world famous typo with is_gate_vma()
Linus Torvalds [Fri, 16 Aug 2013 23:49:06 +0000 (16:49 -0700)]
Merge branch 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fixes from Geert Uytterhoeven:
"These are two critical fixes, needed by distro kernels, and thus also
destined for stable:
- The do_div() commit fixes a crash in mounting btrfs volumes, which
was a regression from 3.2,
- The ARAnyM fix allows to have NatFeat drivers as loadable modules,
which is needed for initrds"
* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Truncate base in do_div()
m68k/atari: ARAnyM - Fix NatFeat module support
dm cache: avoid conflicting remove_mapping() in mq policy
On sparc32, which includes <linux/swap.h> from <asm/pgtable_32.h>:
drivers/md/dm-cache-policy-mq.c:962:13: error: conflicting types for 'remove_mapping'
include/linux/swap.h:285:12: note: previous declaration of 'remove_mapping' was here
As mq_remove_mapping() already exists, and the local remove_mapping() is
used only once, inline it manually to avoid the conflict.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair Kergon <agk@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
Linus Torvalds [Fri, 16 Aug 2013 17:00:18 +0000 (10:00 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux
Pull clock controller fixes from Michael Turquette:
"Two small fixes for the Zynq clock controller introduced in 3.11-rc1
and another Exynos clock patch which fixes a regression that prevents
the video pipeline from functioning on that platform"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
clk: exynos4: Add CLK_GET_RATE_NOCACHE flag for the Exynos4x12 ISP clocks
clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes
clk/zynq/clkc: Add dedicated spinlock for the SWDT
Linus Torvalds [Fri, 16 Aug 2013 16:59:00 +0000 (09:59 -0700)]
Merge tag 'pm-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"The removal of delayed_work_pending() checks from kernel/power/qos.c
done in 3.9 introduced a deadlock in pm_qos_work_fn().
Fix from Stephen Boyd"
* tag 'pm-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / QoS: Fix workqueue deadlock when using pm_qos_update_request_timeout()
Linus Torvalds [Fri, 16 Aug 2013 16:58:21 +0000 (09:58 -0700)]
Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This batch contains a few USB audio fixes, a couple of HD-audio
quirks, various small ASoC driver fixes in addition to an ASoC core
fix that may lead to memory corruption.
Unfortunately slightly more volume than the previous pull request, but
all are reasonable regression fixes"
* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add a fixup for Gateway LT27
ASoC: tegra: fix Tegra30 I2S capture parameter setup
ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
ALSA: hda - Fix missing mute controls for CX5051
ALSA: usb-audio: fix automatic Roland/Yamaha MIDI detection
ALSA: 6fire: make buffers DMA-able (midi)
ALSA: 6fire: make buffers DMA-able (pcm)
ALSA: hda - Add pinfix for LG LW25 laptop
ASoC: cs42l52: Add new TLV for Beep Volume
ASoC: cs42l52: Reorder Min/Max and update to SX_TLV for Beep Volume
ASoC: dapm: Fix empty list check in dapm_new_mux()
ASoC: sgtl5000: fix buggy 'Capture Attenuate Switch' control
ASoC: sgtl5000: prevent playback to be muted when terminating concurrent capture
projects / mirror_ubuntu-kernels.git / log