Hi all,
currently vga always resizes the screen when vga_hw_invalidate is called
while this is not required and all the other graphic emulators don't.
This patch fixes it, making vga invalidate behaviour consistent with the
other emulated devices.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Hi all,
this patch fixes the sdl window resize event handler so that it doesn't
require the emulated graphic card (or console.c) to call
qemu_console_resize.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
This patch introduces dynamic timer intervals: we slow down the refresh
rate when there in no much activity but we get back to a fast refresh
rate when the activity resume.
Please note that qemu_timer_expired is not an inline function any more
because I needed to call it from vnc.c however I don't think this change
should have any serious consequence.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
This patch removes the server surface from VncState and adds a single
server surface to VncDisplay for all the possible clients connected.
Each client maintains a different dirty bitmap in VncState.
The guest surface is moved to VncDisplay as well because we don't need
to track guest updates in more than one place.
This patch has been updated to handle CopyRect correctly and efficiently.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
This patch removes the timer per vnc client connected and adds a single
timer to update all the possible clients.
We call vga_hw_update only once in the timer handler.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Alexander Graf [Sat, 1 Aug 2009 09:48:31 +0000 (11:48 +0200)]
Fix checksum writing in signboot.sh
The printf command takes an octal value after \, so we have to convert
our decimal representation to octal first and then write it.
This unbreaks extboot signing. Multiboot wasn't affected yet because
the checksum was < 8.
Spotted and first patch by Glauber Costa <glommer@redhat.com>.
Printf idea by Paolo Bonzini <bonzini@gnu.org>.
Signed-off-by: Alexander Graf <agraf@suse.de> CC: Glauber Costa <glommer@redhat.com> CC: Paolo Bonzini <bonzini@gnu.org> CC: Jan Ondrej <ondrejj@salstar.sk> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Windows can handle slash (/) path separators,
and QEMU already adds directories using slash,
so there is no need to fight with the correct number
of backslashes.
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
You can set any property for virtio-blk-pci now. You can set the pci
address via addr=. You can switch the device into 0.10 compat mode
using class=0x0180. As this is per device you can have one 0.10 and one
0.11 virtio block device in a single virtual machine.
Old syntax continues to work. Internally it does the same as the two
lines above though. One side effect this has is a different
initialization order, which might result in a different pci address
being assigned by default.
Long term plan here is to have this working for all block devices, i.e.
once all scsi is properly qdev-ified you will be able to do something
like this:
This adds a host drive, but doesn't implicitly add a guest drive for it.
First step in splitting host and guest configuration, check the
following patches to see how this can be used ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Igor Kovalenko [Mon, 3 Aug 2009 19:15:02 +0000 (23:15 +0400)]
Sparc64: replace tsptr with helper routine
tl and tsptr of members sparc64 cpu state must be changed
simultaneously to keep trap state window in sync with current
trap level. Currently translation of store to tl does not change
tsptr, which leads to corrupt trap state on corresponding
trap level.
This patch removes tsptr from sparc64 cpu state and replaces
all uses with call to helper routine.
Changes v0->v1:
- reimplemented helper routine with tcg generator
- on cpu reset trap type and pstate are populated with power-on reset
values, including tl=maxtl
Signed-off-by: igor.v.kovalenko@gmail.com Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Nathan Froyd [Mon, 3 Aug 2009 15:43:25 +0000 (08:43 -0700)]
target-ppc: retain l{w,d}arx loaded value
We do this so we can check on the corresponding stc{w,d}x. whether the
value has changed. It's a poor man's form of implementing atomic
operations and is valid only for NPTL usermode Linux emulation.
Igor Kovalenko [Tue, 28 Jul 2009 21:32:23 +0000 (01:32 +0400)]
sparc64 flush pending conditional evaluations before exposing cpu state
If translation block is interrupted by e.g. mmu exception
we need to compute conditional flags for inclusion into
saved cpu state. Otherwise after return from trap
conditional instructions would use stale psr/xcc data.
Signed-off-by: igor.v.kovalenko@gmail.com
--
Kind regards,
Igor V. Kovalenko
Bill Paul [Wed, 29 Jul 2009 17:22:55 +0000 (10:22 -0700)]
e1000.c doesn't properly emulate EERD and ICS registers
Once again, the emulation of the EERD and ICS registers in e1000.c is
incorrect. Nobody has noticed this before because none of the Intel-written
e1000 drivers use these registers, and all of the independently written open
source drivers copy Intel's example, so they don't use them either.
Regardless, these registers are documented in the programmer's manuals, and
their emulated behavior doesn't match the verified behavior of real hardware,
so any software that does use them doesn't function correctly.
-Bill
Signed-off-by: Bill Paul <wpaul@windriver.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When a VM state change handler changes VM state, other VM state change
handlers can see the state transitions out of order.
bmdma_map(), scsi_disk_init() and virtio_blk_init() install VM state
change handlers to restart DMA. These handlers can vm_stop() by
running into a write error on a drive with werror=stop. This throws
the VM state change handler callback into disarray. Here's an example
case I observed:
0. The virtual IDE drive goes south. All future writes return errors.
1. Something encounters a write error, and duly stops the VM with
vm_stop().
2. vm_stop() calls vm_state_notify(0).
3. vm_state_notify() runs the callbacks in list vm_change_state_head.
It contains ide_dma_restart_cb() installed by bmdma_map(). It also
contains audio_vm_change_state_handler() installed by audio_init().
When sending a copyrect command to the vnc client, we must also update
the local server surface. Otherwise the server's and the client's idea
of the screen content run out of sync and screen updates don't work
correctly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Mon, 27 Jul 2009 21:17:51 +0000 (23:17 +0200)]
fix migration to obey -S
Since migration returns right away, starting the VM right
after calling qemu_start_incoming_migration is wrong even
if -S is not passed. We have to do this after migration
has completed.
Cc: Glauber Costa <glommer@redhat.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Both input and output streams may be in SND_PCM_STATE_SUSPENDED
after the host is suspended and resumed, meaning "Hardware is
suspended". snd_pcm_readi() and snd_pcm_writei() will return
-ESTRPIPE if called while the stream is in this state.
Call snd_pcm_resume() to enable audio output and capture after
host resume.