]> git.proxmox.com Git - mirror_ubuntu-jammy-kernel.git/log
mirror_ubuntu-jammy-kernel.git
5 years agonet: phy: marvell: remove superseded function marvell_set_downshift
Heiner Kallweit [Sat, 19 Oct 2019 13:58:19 +0000 (15:58 +0200)]
net: phy: marvell: remove superseded function marvell_set_downshift

Instead of superseded function marvell_set_downshift() we can use new
function m88e1111_set_downshift() in m88e1116r_config_init().
For this m88e1116r_config_init() has to be moved in the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: phy: marvell: support downshift as PHY tunable
Heiner Kallweit [Sat, 19 Oct 2019 13:57:33 +0000 (15:57 +0200)]
net: phy: marvell: support downshift as PHY tunable

So far downshift is implemented for one small use case only and can't
be controlled from userspace. So let's implement this feature properly
as a PHY tunable so that it can be controlled via ethtool.
More Marvell PHY's may support downshift, but I restricted it for now
to the ones where I have the datasheet.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agotc-testing: updated pedit TDC tests
Roman Mashak [Sat, 19 Oct 2019 13:45:53 +0000 (09:45 -0400)]
tc-testing: updated pedit TDC tests

Added test cases for IP header operations:
- set tos/precedence
- add value to tos/precedence
- clear tos/precedence
- invert tos/precedence

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'mvneta-xdp'
David S. Miller [Mon, 21 Oct 2019 17:36:08 +0000 (10:36 -0700)]
Merge branch 'mvneta-xdp'

Lorenzo Bianconi says:

====================
add XDP support to mvneta driver

Add XDP support to mvneta driver for devices that rely on software
buffer management. Supported verdicts are:
- XDP_DROP
- XDP_PASS
- XDP_REDIRECT
- XDP_TX
Moreover set ndo_xdp_xmit net_device_ops function pointer in order
to support redirecting from other device (e.g. virtio-net).
Convert mvneta driver to page_pool API.
This series is based on previous work done by Jesper and Ilias.
We will send follow-up patches to reduce DMA-sync operations.

Changes since v4:
- reset page_pool pointer to NULL in mvneta_rxq_drop_pkts and in
  mvneta_create_page_pool error path
- move dma sync in mvneta_rx_refill() in patch 2/7
- verify bpf prog pointer in mvneta_xdp_setup to double-check if
  stop/start is really necessary
- coding style fixes

Changes since v3:
- rename MVNETA_XDP_CONSUMED in MVNETA_XDP_DROPPED
- squash patch 4/8 and patch 3/8
- fix dma sync for XDP_TX verdict
- fix queue_index in xdp_rxq_info_reg
- cosmetics

Changes since v2:
- rely on page_pool_recycle_direct instead of xdp_return_buff for XDP_DROP
- define xdp buffer in mvneta_rx_swbm and avoid default initializations
- use dma_sync_single_for_cpu instead of dma_sync_single_range_for_cpu
- run page_pool_release_page in mvneta_swbm_add_rx_fragment even if
  the buffer contains just ETH_FCS

Changes since v1:
- sync dma buffers before refilling hw queues
- fix stats accounting

Changes since RFC:
- implement XDP_TX
- make tx pending buffer list agnostic
- code refactoring
- check if device is running in mvneta_xdp_setup
====================

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: mvneta: add XDP_TX support
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:27 +0000 (10:13 +0200)]
net: mvneta: add XDP_TX support

Implement XDP_TX verdict and ndo_xdp_xmit net_device_ops function
pointer

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: mvneta: make tx buffer array agnostic
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:26 +0000 (10:13 +0200)]
net: mvneta: make tx buffer array agnostic

Allow tx buffer array to contain both skb and xdp buffers in order to
enable xdp frame recycling adding XDP_TX verdict support

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: mvneta: move header prefetch in mvneta_swbm_rx_frame
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:25 +0000 (10:13 +0200)]
net: mvneta: move header prefetch in mvneta_swbm_rx_frame

Move data buffer prefetch in mvneta_swbm_rx_frame after
dma_sync_single_range_for_cpu

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: mvneta: add basic XDP support
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:24 +0000 (10:13 +0200)]
net: mvneta: add basic XDP support

Add basic XDP support to mvneta driver for devices that rely on software
buffer management. Currently supported verdicts are:
- XDP_DROP
- XDP_PASS
- XDP_REDIRECT
- XDP_ABORTED

- iptables drop:
$iptables -t raw -I PREROUTING -p udp --dport 9 -j DROP
$nstat -n && sleep 1 && nstat
IpInReceives 151169 0.0
IpExtInOctets 6953544 0.0
IpExtInNoECTPkts 151165 0.0

- XDP_DROP via xdp1
$./samples/bpf/xdp1 3
proto 0: 421419 pkt/s
proto 0: 421444 pkt/s
proto 0: 421393 pkt/s
proto 0: 421440 pkt/s
proto 0: 421184 pkt/s

Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: mvneta: rely on build_skb in mvneta_rx_swbm poll routine
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:23 +0000 (10:13 +0200)]
net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine

Refactor mvneta_rx_swbm code introducing mvneta_swbm_rx_frame and
mvneta_swbm_add_rx_fragment routines. Rely on build_skb in oreder to
allocate skb since the previous patch introduced buffer recycling using
the page_pool API.
This patch fixes even an issue in the original driver where dma buffers
are accessed before dma sync.
mvneta driver can run on not cache coherent devices so it is
necessary to sync DMA buffers before sending them to the device
in order to avoid memory corruptions. Running perf analysis we can
see a performance cost associated with this DMA-sync (anyway it is
already there in the original driver code). In follow up patches we
will add more logic to reduce DMA-sync as much as possible.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: mvneta: introduce page pool API for sw buffer manager
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:22 +0000 (10:13 +0200)]
net: mvneta: introduce page pool API for sw buffer manager

Use the page_pool api for allocations and DMA handling instead of
__dev_alloc_page()/dma_map_page() and free_page()/dma_unmap_page().
Pages are unmapped using page_pool_release_page before packets
go into the network stack.

The page_pool API offers buffer recycling capabilities for XDP but
allocates one page per packet, unless the driver splits and manages
the allocated page.
This is a preliminary patch to add XDP support to mvneta driver

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: mvneta: introduce mvneta_update_stats routine
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:21 +0000 (10:13 +0200)]
net: mvneta: introduce mvneta_update_stats routine

Introduce mvneta_update_stats routine to collect {rx/tx} statistics
(packets and bytes). This is a preliminary patch to add XDP support to
mvneta driver

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'hns3-next'
David S. Miller [Mon, 21 Oct 2019 16:22:10 +0000 (09:22 -0700)]
Merge branch 'hns3-next'

Huazhong Tan says:

====================
net: hns3: add some cleanups & optimizations

This patchset includes some cleanups and optimizations for the HNS3
ethernet driver.

[patch 1/8] removes unused and unnecessary structures.

[patch 2/8] uses a ETH_ALEN u8 array to replace two mac_addr_*
field in struct hclge_mac_mgr_tbl_entry_cmd.

[patch 3/8] optimizes the barrier used in the IO path.

[patch 4/8] introduces macro ring_to_netdev() to get netdevive
from struct hns3_enet_ring variable.

[patch 5/8] makes struct hns3_enet_ring to be cacheline aligned

[patch 6/8] adds a minor cleanup for hns3_handle_rx_bd().

[patch 7/8] removes linear data allocating for fraglist SKB.

[patch 8/8] clears hardware error when resetting.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hns3: log and clear hardware error after reset complete
Jian Shen [Sat, 19 Oct 2019 08:03:56 +0000 (16:03 +0800)]
net: hns3: log and clear hardware error after reset complete

When device is resetting, the CMDQ service may be stopped until
reset completed. If a new RAS error occurs at this moment, it
will no be able to clear the RAS source. This patch fixes it
by clear the RAS source after reset complete.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hns3: do not allocate linear data for fraglist skb
Yunsheng Lin [Sat, 19 Oct 2019 08:03:55 +0000 (16:03 +0800)]
net: hns3: do not allocate linear data for fraglist skb

Currently, napi_alloc_skb() is used to allocate skb for fraglist
when the head skb is not enough to hold the remaining data, and
the remaining data is added to the frags part of the fraglist skb,
leaving the linear part unused.

So this patch passes length of 0 to allocate fraglist skb with
zero size of linear data.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hns3: minor cleanup for hns3_handle_rx_bd()
Yunsheng Lin [Sat, 19 Oct 2019 08:03:54 +0000 (16:03 +0800)]
net: hns3: minor cleanup for hns3_handle_rx_bd()

Since commit e55970950556 ("net: hns3: Add handling of GRO Pkts
not fully RX'ed in NAPI poll"), ring->skb is used to record the
current SKB when processing the RX BD in hns3_handle_rx_bd(),
so the parameter out_skb is unnecessary.

This patch also adjusts the err checking to reduce duplication
in hns3_handle_rx_bd(), and "err == -ENXIO" is rare case, so put
it in the unlikely annotation.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hns3: make struct hns3_enet_ring cacheline aligned
Yunsheng Lin [Sat, 19 Oct 2019 08:03:53 +0000 (16:03 +0800)]
net: hns3: make struct hns3_enet_ring cacheline aligned

Since struct hns3_enet_ring is a frequently used in critical data
path, so make it cacheline aligned as struct hns3_enet_tqp_vector.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hns3: introduce ring_to_netdev() in enet module
Yunsheng Lin [Sat, 19 Oct 2019 08:03:52 +0000 (16:03 +0800)]
net: hns3: introduce ring_to_netdev() in enet module

There are a few places that need to access the netdev of a ring
through ring->tqp->handle->kinfo.netdev, and ring->tqp is a struct
which both in enet and hclge modules, it is better to use the
struct that is only used in enet module.

This patch adds the ring_to_netdev() to access the netdev of ring
through ring->tqp_vector->napi.dev.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hns3: minor optimization for barrier in IO path
Yunsheng Lin [Sat, 19 Oct 2019 08:03:51 +0000 (16:03 +0800)]
net: hns3: minor optimization for barrier in IO path

Currently, the TX and RX ring in a queue is bounded to the
same IRQ, there may be unnecessary barrier op when only one of
the ring need to be processed.

This patch adjusts the location of rmb() in hns3_clean_tx_ring()
and adds a checking in hns3_clean_rx_ring() to avoid unnecessary
barrier op when there is nothing to do for the ring.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hns3: optimized MAC address in management table.
Guojia Liao [Sat, 19 Oct 2019 08:03:50 +0000 (16:03 +0800)]
net: hns3: optimized MAC address in management table.

mac_addr_hi32 and mac_addr_lo16 are used to store the MAC address
for management table. But using array of mac_addr[ETH_ALEN] would
be more general and not need to care about the big-endian mode of
the CPU.

Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hns3: remove struct hns3_nic_ring_data in hns3_enet module
Yunsheng Lin [Sat, 19 Oct 2019 08:03:49 +0000 (16:03 +0800)]
net: hns3: remove struct hns3_nic_ring_data in hns3_enet module

Only the queue_index field in struct hns3_nic_ring_data is
used, other field is unused and unnecessary for hns3 driver,
so this patch removes it and move the queue_index field to
hns3_enet_ring.

This patch also removes an unused struct hns_queue declaration.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
David S. Miller [Sun, 20 Oct 2019 05:51:25 +0000 (22:51 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Several cases of overlapping changes which were for the most
part trivially resolvable.

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Linus Torvalds [Sat, 19 Oct 2019 21:09:11 +0000 (17:09 -0400)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:
 "I was battling a cold after some recent trips, so quite a bit piled up
  meanwhile, sorry about that.

  Highlights:

   1) Fix fd leak in various bpf selftests, from Brian Vazquez.

   2) Fix crash in xsk when device doesn't support some methods, from
      Magnus Karlsson.

   3) Fix various leaks and use-after-free in rxrpc, from David Howells.

   4) Fix several SKB leaks due to confusion of who owns an SKB and who
      should release it in the llc code. From Eric Biggers.

   5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.

   6) Jumbo packets don't work after resume on r8169, as the BIOS resets
      the chip into non-jumbo mode during suspend. From Heiner Kallweit.

   7) Corrupt L2 header during MPLS push, from Davide Caratti.

   8) Prevent possible infinite loop in tc_ctl_action, from Eric
      Dumazet.

   9) Get register bits right in bcmgenet driver, based upon chip
      version. From Florian Fainelli.

  10) Fix mutex problems in microchip DSA driver, from Marek Vasut.

  11) Cure race between route lookup and invalidation in ipv4, from Wei
      Wang.

  12) Fix performance regression due to false sharing in 'net'
      structure, from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
  net: reorder 'struct net' fields to avoid false sharing
  net: dsa: fix switch tree list
  net: ethernet: dwmac-sun8i: show message only when switching to promisc
  net: aquantia: add an error handling in aq_nic_set_multicast_list
  net: netem: correct the parent's backlog when corrupted packet was dropped
  net: netem: fix error path for corrupted GSO frames
  macb: propagate errors when getting optional clocks
  xen/netback: fix error path of xenvif_connect_data()
  net: hns3: fix mis-counting IRQ vector numbers issue
  net: usb: lan78xx: Connect PHY before registering MAC
  vsock/virtio: discard packets if credit is not respected
  vsock/virtio: send a credit update when buffer size is changed
  mlxsw: spectrum_trap: Push Ethernet header before reporting trap
  net: ensure correct skb->tstamp in various fragmenters
  net: bcmgenet: reset 40nm EPHY on energy detect
  net: bcmgenet: soft reset 40nm EPHYs before MAC init
  net: phy: bcm7xxx: define soft_reset for 40nm EPHY
  net: bcmgenet: don't set phydev->link from MAC
  net: Update address for MediaTek ethernet driver in MAINTAINERS
  ipv4: fix race condition between route lookup and invalidation
  ...

5 years agonet: reorder 'struct net' fields to avoid false sharing
Eric Dumazet [Fri, 18 Oct 2019 22:20:05 +0000 (15:20 -0700)]
net: reorder 'struct net' fields to avoid false sharing

Intel test robot reported a ~7% regression on TCP_CRR tests
that they bisected to the cited commit.

Indeed, every time a new TCP socket is created or deleted,
the atomic counter net->count is touched (via get_net(net)
and put_net(net) calls)

So cpus might have to reload a contended cache line in
net_hash_mix(net) calls.

We need to reorder 'struct net' fields to move @hash_mix
in a read mostly cache line.

We move in the first cache line fields that can be
dirtied often.

We probably will have to address in a followup patch
the __randomize_layout that was added in linux-4.13,
since this might break our placement choices.

Fixes: 355b98553789 ("netns: provide pure entropy for net_hash_mix()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: dsa: fix switch tree list
Vivien Didelot [Fri, 18 Oct 2019 21:02:46 +0000 (17:02 -0400)]
net: dsa: fix switch tree list

If there are multiple switch trees on the device, only the last one
will be listed, because the arguments of list_add_tail are swapped.

Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation")
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: ethernet: dwmac-sun8i: show message only when switching to promisc
Mans Rullgard [Fri, 18 Oct 2019 16:56:58 +0000 (17:56 +0100)]
net: ethernet: dwmac-sun8i: show message only when switching to promisc

Printing the info message every time more than the max number of mac
addresses are requested generates unnecessary log spam.  Showing it only
when the hw is not already in promiscous mode is equally informative
without being annoying.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: aquantia: add an error handling in aq_nic_set_multicast_list
Chenwandun [Fri, 18 Oct 2019 10:20:37 +0000 (18:20 +0800)]
net: aquantia: add an error handling in aq_nic_set_multicast_list

add an error handling in aq_nic_set_multicast_list, it may not
work when hw_multicast_list_set error; and at the same time
it will remove gcc Wunused-but-set-variable warning.

Signed-off-by: Chenwandun <chenwandun@huawei.com>
Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'netem-fix-further-issues-with-packet-corruption'
David S. Miller [Sat, 19 Oct 2019 19:12:36 +0000 (12:12 -0700)]
Merge branch 'netem-fix-further-issues-with-packet-corruption'

Jakub Kicinski says:

====================
net: netem: fix further issues with packet corruption

This set is fixing two more issues with the netem packet corruption.

First patch (which was previously posted) avoids NULL pointer dereference
if the first frame gets freed due to allocation or checksum failure.
v2 improves the clarity of the code a little as requested by Cong.

Second patch ensures we don't return SUCCESS if the frame was in fact
dropped. Thanks to this commit message for patch 1 no longer needs the
"this will still break with a single-frame failure" disclaimer.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: netem: correct the parent's backlog when corrupted packet was dropped
Jakub Kicinski [Fri, 18 Oct 2019 16:16:58 +0000 (09:16 -0700)]
net: netem: correct the parent's backlog when corrupted packet was dropped

If packet corruption failed we jump to finish_segs and return
NET_XMIT_SUCCESS. Seeing success will make the parent qdisc
increment its backlog, that's incorrect - we need to return
NET_XMIT_DROP.

Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: netem: fix error path for corrupted GSO frames
Jakub Kicinski [Fri, 18 Oct 2019 16:16:57 +0000 (09:16 -0700)]
net: netem: fix error path for corrupted GSO frames

To corrupt a GSO frame we first perform segmentation.  We then
proceed using the first segment instead of the full GSO skb and
requeue the rest of the segments as separate packets.

If there are any issues with processing the first segment we
still want to process the rest, therefore we jump to the
finish_segs label.

Commit 177b8007463c ("net: netem: fix backlog accounting for
corrupted GSO frames") started using the pointer to the first
segment in the "rest of segments processing", but as mentioned
above the first segment may had already been freed at this point.

Backlog corrections for parent qdiscs have to be adjusted.

Fixes: 177b8007463c ("net: netem: fix backlog accounting for corrupted GSO frames")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agomacb: propagate errors when getting optional clocks
Michael Tretter [Fri, 18 Oct 2019 14:11:43 +0000 (16:11 +0200)]
macb: propagate errors when getting optional clocks

The tx_clk, rx_clk, and tsu_clk are optional. Currently the macb driver
marks clock as not available if it receives an error when trying to get
a clock. This is wrong, because a clock controller might return
-EPROBE_DEFER if a clock is not available, but will eventually become
available.

In these cases, the driver would probe successfully but will never be
able to adjust the clocks, because the clocks were not available during
probe, but became available later.

For example, the clock controller for the ZynqMP is implemented in the
PMU firmware and the clocks are only available after the firmware driver
has been probed.

Use devm_clk_get_optional() in instead of devm_clk_get() to get the
optional clock and propagate all errors to the calling function.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoxen/netback: fix error path of xenvif_connect_data()
Juergen Gross [Fri, 18 Oct 2019 07:45:49 +0000 (09:45 +0200)]
xen/netback: fix error path of xenvif_connect_data()

xenvif_connect_data() calls module_put() in case of error. This is
wrong as there is no related module_get().

Remove the superfluous module_put().

Fixes: 279f438e36c0a7 ("xen-netback: Don't destroy the netdev until the vif is shut down")
Cc: <stable@vger.kernel.org> # 3.12
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hns3: fix mis-counting IRQ vector numbers issue
Yonglong Liu [Fri, 18 Oct 2019 03:42:59 +0000 (11:42 +0800)]
net: hns3: fix mis-counting IRQ vector numbers issue

Currently, the num_msi_left means the vector numbers of NIC,
but if the PF supported RoCE, it contains the vector numbers
of NIC and RoCE(Not expected).

This may cause interrupts lost in some case, because of the
NIC module used the vector resources which belongs to RoCE.

This patch adds a new variable num_nic_msi to store the vector
numbers of NIC, and adjust the default TQP numbers and rss_size
according to the value of num_nic_msi.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Sat, 19 Oct 2019 10:53:59 +0000 (06:53 -0400)]
Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "Rather a lot of fixes, almost all affecting mm/"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
  scripts/gdb: fix debugging modules on s390
  kernel/events/uprobes.c: only do FOLL_SPLIT_PMD for uprobe register
  mm/thp: allow dropping THP from page cache
  mm/vmscan.c: support removing arbitrary sized pages from mapping
  mm/thp: fix node page state in split_huge_page_to_list()
  proc/meminfo: fix output alignment
  mm/init-mm.c: include <linux/mman.h> for vm_committed_as_batch
  mm/filemap.c: include <linux/ramfs.h> for generic_file_vm_ops definition
  mm: include <linux/huge_mm.h> for is_vma_temporary_stack
  zram: fix race between backing_dev_show and backing_dev_store
  mm/memcontrol: update lruvec counters in mem_cgroup_move_account
  ocfs2: fix panic due to ocfs2_wq is null
  hugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic()
  mm: memblock: do not enforce current limit for memblock_phys* family
  mm: memcg: get number of pages on the LRU list in memcgroup base on lru_zone_size
  mm/gup: fix a misnamed "write" argument, and a related bug
  mm/gup_benchmark: add a missing "w" to getopt string
  ocfs2: fix error handling in ocfs2_setattr()
  mm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release
  mm/memunmap: don't access uninitialized memmap in memunmap_pages()
  ...

5 years agoscripts/gdb: fix debugging modules on s390
Ilya Leoshkevich [Sat, 19 Oct 2019 03:20:43 +0000 (20:20 -0700)]
scripts/gdb: fix debugging modules on s390

Currently lx-symbols assumes that module text is always located at
module->core_layout->base, but s390 uses the following layout:

  +------+  <- module->core_layout->base
  | GOT  |
  +------+  <- module->core_layout->base + module->arch->plt_offset
  | PLT  |
  +------+  <- module->core_layout->base + module->arch->plt_offset +
  | TEXT |     module->arch->plt_size
  +------+

Therefore, when trying to debug modules on s390, all the symbol
addresses are skewed by plt_offset + plt_size.

Fix by adding plt_offset + plt_size to module_addr in
load_module_symbols().

Link: http://lkml.kernel.org/r/20191017085917.81791-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agokernel/events/uprobes.c: only do FOLL_SPLIT_PMD for uprobe register
Song Liu [Sat, 19 Oct 2019 03:20:40 +0000 (20:20 -0700)]
kernel/events/uprobes.c: only do FOLL_SPLIT_PMD for uprobe register

Attaching uprobe to text section in THP splits the PMD mapped page table
into PTE mapped entries.  On uprobe detach, we would like to regroup PMD
mapped page table entry to regain performance benefit of THP.

However, the regroup is broken For perf_event based trace_uprobe.  This
is because perf_event based trace_uprobe calls uprobe_unregister twice
on close: first in TRACE_REG_PERF_CLOSE, then in
TRACE_REG_PERF_UNREGISTER.  The second call will split the PMD mapped
page table entry, which is not the desired behavior.

Fix this by only use FOLL_SPLIT_PMD for uprobe register case.

Add a WARN() to confirm uprobe unregister never work on huge pages, and
abort the operation when this WARN() triggers.

Link: http://lkml.kernel.org/r/20191017164223.2762148-6-songliubraving@fb.com
Fixes: 5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT")
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/thp: allow dropping THP from page cache
Kirill A. Shutemov [Sat, 19 Oct 2019 03:20:36 +0000 (20:20 -0700)]
mm/thp: allow dropping THP from page cache

Once a THP is added to the page cache, it cannot be dropped via
/proc/sys/vm/drop_caches.  Fix this issue with proper handling in
invalidate_mapping_pages().

Link: http://lkml.kernel.org/r/20191017164223.2762148-5-songliubraving@fb.com
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/vmscan.c: support removing arbitrary sized pages from mapping
William Kucharski [Sat, 19 Oct 2019 03:20:33 +0000 (20:20 -0700)]
mm/vmscan.c: support removing arbitrary sized pages from mapping

__remove_mapping() assumes that pages can only be either base pages or
HPAGE_PMD_SIZE.  Ask the page what size it is.

Link: http://lkml.kernel.org/r/20191017164223.2762148-4-songliubraving@fb.com
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/thp: fix node page state in split_huge_page_to_list()
Kirill A. Shutemov [Sat, 19 Oct 2019 03:20:30 +0000 (20:20 -0700)]
mm/thp: fix node page state in split_huge_page_to_list()

Make sure split_huge_page_to_list() handles the state of shmem THP and
file THP properly.

Link: http://lkml.kernel.org/r/20191017164223.2762148-3-songliubraving@fb.com
Fixes: 60fbf0ab5da1 ("mm,thp: stats for file backed THP")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoproc/meminfo: fix output alignment
Kirill A. Shutemov [Sat, 19 Oct 2019 03:20:27 +0000 (20:20 -0700)]
proc/meminfo: fix output alignment

Patch series "Fixes for THP in page cache", v2.

This patch (of 5):

Add extra space for FileHugePages and FilePmdMapped, so the output is
aligned with other rows.

Link: http://lkml.kernel.org/r/20191017164223.2762148-2-songliubraving@fb.com
Fixes: 60fbf0ab5da1 ("mm,thp: stats for file backed THP")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/init-mm.c: include <linux/mman.h> for vm_committed_as_batch
Ben Dooks (Codethink) [Sat, 19 Oct 2019 03:20:24 +0000 (20:20 -0700)]
mm/init-mm.c: include <linux/mman.h> for vm_committed_as_batch

mm_init.c needs to include <linux/mman.h> for the definition of
vm_committed_as_batch.  Fixes the following sparse warning:

  mm/mm_init.c:141:5: warning: symbol 'vm_committed_as_batch' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20191016091509.26708-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/filemap.c: include <linux/ramfs.h> for generic_file_vm_ops definition
Ben Dooks [Sat, 19 Oct 2019 03:20:20 +0000 (20:20 -0700)]
mm/filemap.c: include <linux/ramfs.h> for generic_file_vm_ops definition

The generic_file_vm_ops is defined in <linux/ramfs.h> so include it to
fix the following warning:

  mm/filemap.c:2717:35: warning: symbol 'generic_file_vm_ops' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20191008102311.25432-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm: include <linux/huge_mm.h> for is_vma_temporary_stack
Ben Dooks [Sat, 19 Oct 2019 03:20:17 +0000 (20:20 -0700)]
mm: include <linux/huge_mm.h> for is_vma_temporary_stack

Include <linux/huge_mm.h> for the definition of is_vma_temporary_stack
to fix the following sparse warning:

  mm/rmap.c:1673:6: warning: symbol 'is_vma_temporary_stack' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20191009151155.27763-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agozram: fix race between backing_dev_show and backing_dev_store
Chenwandun [Sat, 19 Oct 2019 03:20:14 +0000 (20:20 -0700)]
zram: fix race between backing_dev_show and backing_dev_store

CPU0:        CPU1:
backing_dev_show        backing_dev_store
    ......    ......
    file = zram->backing_dev;
    down_read(&zram->init_lock);    down_read(&zram->init_init_lock)
    file_path(file, ...);    zram->backing_dev = backing_dev;
    up_read(&zram->init_lock);    up_read(&zram->init_lock);

gets the value of zram->backing_dev too early in backing_dev_show, which
resultin the value being NULL at the beginning, and not NULL later.

backtrace:
  d_path+0xcc/0x174
  file_path+0x10/0x18
  backing_dev_show+0x40/0xb4
  dev_attr_show+0x20/0x54
  sysfs_kf_seq_show+0x9c/0x10c
  kernfs_seq_show+0x28/0x30
  seq_read+0x184/0x488
  kernfs_fop_read+0x5c/0x1a4
  __vfs_read+0x44/0x128
  vfs_read+0xa0/0x138
  SyS_read+0x54/0xb4

Link: http://lkml.kernel.org/r/1571046839-16814-1-git-send-email-chenwandun@huawei.com
Signed-off-by: Chenwandun <chenwandun@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/memcontrol: update lruvec counters in mem_cgroup_move_account
Konstantin Khlebnikov [Sat, 19 Oct 2019 03:20:11 +0000 (20:20 -0700)]
mm/memcontrol: update lruvec counters in mem_cgroup_move_account

Mapped, dirty and writeback pages are also counted in per-lruvec stats.
These counters needs update when page is moved between cgroups.

Currently is nobody *consuming* the lruvec versions of these counters and
that there is no user-visible effect.

Link: http://lkml.kernel.org/r/157112699975.7360.1062614888388489788.stgit@buzz
Fixes: 00f3ca2c2d66 ("mm: memcontrol: per-lruvec stats infrastructure")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoocfs2: fix panic due to ocfs2_wq is null
Yi Li [Sat, 19 Oct 2019 03:20:08 +0000 (20:20 -0700)]
ocfs2: fix panic due to ocfs2_wq is null

mount.ocfs2 failed when reading ocfs2 filesystem superblock encounters
an error.  ocfs2_initialize_super() returns before allocating ocfs2_wq.
ocfs2_dismount_volume() triggers the following panic.

  Oct 15 16:09:27 cnwarekv-205120 kernel: On-disk corruption discovered.Please run fsck.ocfs2 once the filesystem is unmounted.
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_read_locked_inode:537 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:458 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:491 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_initialize_super:2313 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_fill_super:1033 ERROR: status = -30
  ------------[ cut here ]------------
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 11753 Comm: mount.ocfs2 Tainted: G  E
        4.14.148-200.ckv.x86_64 #1
  Hardware name: Sugon H320-G30/35N16-US, BIOS 0SSDX017 12/21/2018
  task: ffff967af0520000 task.stack: ffffa5f05484000
  RIP: 0010:mutex_lock+0x19/0x20
  Call Trace:
    flush_workqueue+0x81/0x460
    ocfs2_shutdown_local_alloc+0x47/0x440 [ocfs2]
    ocfs2_dismount_volume+0x84/0x400 [ocfs2]
    ocfs2_fill_super+0xa4/0x1270 [ocfs2]
    ? ocfs2_initialize_super.isa.211+0xf20/0xf20 [ocfs2]
    mount_bdev+0x17f/0x1c0
    mount_fs+0x3a/0x160

Link: http://lkml.kernel.org/r/1571139611-24107-1-git-send-email-yili@winhong.com
Signed-off-by: Yi Li <yilikernel@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agohugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic()
David Hildenbrand [Sat, 19 Oct 2019 03:20:05 +0000 (20:20 -0700)]
hugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic()

Uninitialized memmaps contain garbage and in the worst case trigger
kernel BUGs, especially with CONFIG_PAGE_POISONING.  They should not get
touched.

Let's make sure that we only consider online memory (managed by the
buddy) that has initialized memmaps.  ZONE_DEVICE is not applicable.

page_zone() will call page_to_nid(), which will trigger
VM_BUG_ON_PGFLAGS(PagePoisoned(page), page) with CONFIG_PAGE_POISONING
and CONFIG_DEBUG_VM_PGFLAGS when called on uninitialized memmaps.  This
can be the case when an offline memory block (e.g., never onlined) is
spanned by a zone.

Note: As explained by Michal in [1], alloc_contig_range() will verify
the range.  So it boils down to the wrong access in this function.

[1] http://lkml.kernel.org/r/20180423000943.GO17484@dhcp22.suse.cz

Link: http://lkml.kernel.org/r/20191015120717.4858-1-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm: memblock: do not enforce current limit for memblock_phys* family
Mike Rapoport [Sat, 19 Oct 2019 03:20:01 +0000 (20:20 -0700)]
mm: memblock: do not enforce current limit for memblock_phys* family

Until commit 92d12f9544b7 ("memblock: refactor internal allocation
functions") the maximal address for memblock allocations was forced to
memblock.current_limit only for the allocation functions returning
virtual address.  The changes introduced by that commit moved the limit
enforcement into the allocation core and as a result the allocation
functions returning physical address also started to limit allocations
to memblock.current_limit.

This caused breakage of etnaviv GPU driver:

  etnaviv etnaviv: bound 130000.gpu (ops gpu_ops)
  etnaviv etnaviv: bound 134000.gpu (ops gpu_ops)
  etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops)
  etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
  etnaviv-gpu 130000.gpu: command buffer outside valid memory window
  etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
  etnaviv-gpu 134000.gpu: command buffer outside valid memory window
  etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
  etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0

Restore the behaviour of memblock_phys* family so that these functions
will not enforce memblock.current_limit.

Link: http://lkml.kernel.org/r/1570915861-17633-1-git-send-email-rppt@kernel.org
Fixes: 92d12f9544b7 ("memblock: refactor internal allocation functions")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Adam Ford <aford173@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> [imx6q-logicpd]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm: memcg: get number of pages on the LRU list in memcgroup base on lru_zone_size
Honglei Wang [Sat, 19 Oct 2019 03:19:58 +0000 (20:19 -0700)]
mm: memcg: get number of pages on the LRU list in memcgroup base on lru_zone_size

Commit 1a61ab8038e72 ("mm: memcontrol: replace zone summing with
lruvec_page_state()") has made lruvec_page_state to use per-cpu counters
instead of calculating it directly from lru_zone_size with an idea that
this would be more effective.

Tim has reported that this is not really the case for their database
benchmark which is showing an opposite results where lruvec_page_state
is taking up a huge chunk of CPU cycles (about 25% of the system time
which is roughly 7% of total cpu cycles) on 5.3 kernels.  The workload
is running on a larger machine (96cpus), it has many cgroups (500) and
it is heavily direct reclaim bound.

Tim Chen said:

: The problem can also be reproduced by running simple multi-threaded
: pmbench benchmark with a fast Optane SSD swap (see profile below).
:
:
: 6.15%     3.08%  pmbench          [kernel.vmlinux]            [k] lruvec_lru_size
:             |
:             |--3.07%--lruvec_lru_size
:             |          |
:             |          |--2.11%--cpumask_next
:             |          |          |
:             |          |           --1.66%--find_next_bit
:             |          |
:             |           --0.57%--call_function_interrupt
:             |                     |
:             |                      --0.55%--smp_call_function_interrupt
:             |
:             |--1.59%--0x441f0fc3d009
:             |          _ops_rdtsc_init_base_freq
:             |          access_histogram
:             |          page_fault
:             |          __do_page_fault
:             |          handle_mm_fault
:             |          __handle_mm_fault
:             |          |
:             |           --1.54%--do_swap_page
:             |                     swapin_readahead
:             |                     swap_cluster_readahead
:             |                     |
:             |                      --1.53%--read_swap_cache_async
:             |                                __read_swap_cache_async
:             |                                alloc_pages_vma
:             |                                __alloc_pages_nodemask
:             |                                __alloc_pages_slowpath
:             |                                try_to_free_pages
:             |                                do_try_to_free_pages
:             |                                shrink_node
:             |                                shrink_node_memcg
:             |                                |
:             |                                |--0.77%--lruvec_lru_size
:             |                                |
:             |                                 --0.76%--inactive_list_is_low
:             |                                           |
:             |                                            --0.76%--lruvec_lru_size
:             |
:              --1.50%--measure_read
:                        page_fault
:                        __do_page_fault
:                        handle_mm_fault
:                        __handle_mm_fault
:                        do_swap_page
:                        swapin_readahead
:                        swap_cluster_readahead
:                        |
:                         --1.48%--read_swap_cache_async
:                                   __read_swap_cache_async
:                                   alloc_pages_vma
:                                   __alloc_pages_nodemask
:                                   __alloc_pages_slowpath
:                                   try_to_free_pages
:                                   do_try_to_free_pages
:                                   shrink_node
:                                   shrink_node_memcg
:                                   |
:                                   |--0.75%--inactive_list_is_low
:                                   |          |
:                                   |           --0.75%--lruvec_lru_size
:                                   |
:                                    --0.73%--lruvec_lru_size

The likely culprit is the cache traffic the lruvec_page_state_local
generates.  Dave Hansen says:

: I was thinking purely of the cache footprint.  If it's reading
: pn->lruvec_stat_local->count[idx] is three separate cachelines, so 192
: bytes of cache *96 CPUs = 18k of data, mostly read-only.  1 cgroup would
: be 18k of data for the whole system and the caching would be pretty
: efficient and all 18k would probably survive a tight page fault loop in
: the L1.  500 cgroups would be ~90k of data per CPU thread which doesn't
: fit in the L1 and probably wouldn't survive a tight page fault loop if
: both logical threads were banging on different cgroups.
:
: It's just a theory, but it's why I noted the number of cgroups when I
: initially saw this show up in profiles

Fix the regression by partially reverting the said commit and calculate
the lru size explicitly.

Link: http://lkml.kernel.org/r/20190905071034.16822-1-honglei.wang@oracle.com
Fixes: 1a61ab8038e72 ("mm: memcontrol: replace zone summing with lruvec_page_state()")
Signed-off-by: Honglei Wang <honglei.wang@oracle.com>
Reported-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Tested-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: <stable@vger.kernel.org> [5.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/gup: fix a misnamed "write" argument, and a related bug
John Hubbard [Sat, 19 Oct 2019 03:19:53 +0000 (20:19 -0700)]
mm/gup: fix a misnamed "write" argument, and a related bug

In several routines, the "flags" argument is incorrectly named "write".
Change it to "flags".

Also, in one place, the misnaming led to an actual bug:
"flags & FOLL_WRITE" is required, rather than just "flags".
(That problem was flagged by krobot, in v1 of this patch.)

Also, change the flags argument from int, to unsigned int.

You can see that this was a simple oversight, because the
calling code passes "flags" to the fifth argument:

gup_pgd_range():
    ...
    if (!gup_huge_pd(__hugepd(pgd_val(pgd)), addr,
    PGDIR_SHIFT, next, flags, pages, nr))

...which, until this patch, the callees referred to as "write".

Also, change two lines to avoid checkpatch line length
complaints, and another line to fix another oversight
that checkpatch called out: missing "int" on pdshift.

Link: http://lkml.kernel.org/r/20191014184639.1512873-3-jhubbard@nvidia.com
Fixes: b798bec4741b ("mm/gup: change write parameter to flags in fast walk")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reported-by: kbuild test robot <lkp@intel.com>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/gup_benchmark: add a missing "w" to getopt string
John Hubbard [Sat, 19 Oct 2019 03:19:50 +0000 (20:19 -0700)]
mm/gup_benchmark: add a missing "w" to getopt string

Even though gup_benchmark.c has code to handle the -w command-line option,
the "w" is not part of the getopt string.  It looks as if it has been
missing the whole time.

On my machine, this leads naturally to the following predictable result:

  $ sudo ./gup_benchmark -w
  ./gup_benchmark: invalid option -- 'w'

...which is fixed with this commit.

Link: http://lkml.kernel.org/r/20191014184639.1512873-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoocfs2: fix error handling in ocfs2_setattr()
Chengguang Xu [Sat, 19 Oct 2019 03:19:47 +0000 (20:19 -0700)]
ocfs2: fix error handling in ocfs2_setattr()

Should set transfer_to[USRQUOTA/GRPQUOTA] to NULL on error case before
jumping to do dqput().

Link: http://lkml.kernel.org/r/20191010082349.1134-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release
Roman Gushchin [Sat, 19 Oct 2019 03:19:44 +0000 (20:19 -0700)]
mm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release

Karsten reported the following panic in __free_slab() happening on a s390x
machine:

  Unable to handle kernel pointer dereference in virtual kernel address space
  Failing address: 0000000000000000 TEID: 0000000000000483
  Fault in home space mode while using kernel ASCE.
  AS:00000000017d4007 R3:000000007fbd0007 S:000000007fbff000 P:000000000000003d
  Oops: 0004 ilc:3 Ý#1¨ PREEMPT SMP
  Modules linked in: tcp_diag inet_diag xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_at nf_nat
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-05872-g6133e3e4bada-dirty #14
  Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
  Krnl PSW : 0704d00180000000 00000000003cadb6 (__free_slab+0x686/0x6b0)
             R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
  Krnl GPRS: 00000000f3a32928 0000000000000000 000000007fbf5d00 000000000117c4b8
             0000000000000000 000000009e3291c1 0000000000000000 0000000000000000
             0000000000000003 0000000000000008 000000002b478b00 000003d080a97600
             0000000000000003 0000000000000008 000000002b478b00 000003d080a97600
             000000000117ba00 000003e000057db0 00000000003cabcc 000003e000057c78
  Krnl Code: 00000000003cada6e310a1400004        lg      %r1,320(%r10)
             00000000003cadacc0e50046c286        brasl   %r14,ca32b8
            #00000000003cadb2a7f4fe36            brc     15,3caa1e
            >00000000003cadb6e32060800024        stg     %r2,128(%r6)
             00000000003cadbca7f4fd9e            brc     15,3ca8f8
             00000000003cadc0c0e50046790c        brasl   %r14,c99fd8
             00000000003cadc6a7f4fe2c            brc     15,3caa
             00000000003cadc6a7f4fe2c            brc     15,3caa1e
             00000000003cadcaecb1ffff00d9        aghik   %r11,%r1,-1
  Call Trace:
  (<00000000003cabcc> __free_slab+0x49c/0x6b0)
   <00000000001f5886> rcu_core+0x5a6/0x7e0
   <0000000000ca2dea> __do_softirq+0xf2/0x5c0
   <0000000000152644> irq_exit+0x104/0x130
   <000000000010d222> do_IRQ+0x9a/0xf0
   <0000000000ca2344> ext_int_handler+0x130/0x134
   <0000000000103648> enabled_wait+0x58/0x128
  (<0000000000103634> enabled_wait+0x44/0x128)
   <0000000000103b00> arch_cpu_idle+0x40/0x58
   <0000000000ca0544> default_idle_call+0x3c/0x68
   <000000000018eaa4> do_idle+0xec/0x1c0
   <000000000018ee0e> cpu_startup_entry+0x36/0x40
   <000000000122df34> arch_call_rest_init+0x5c/0x88
   <0000000000000000> 0x0
  INFO: lockdep is turned off.
  Last Breaking-Event-Address:
   <00000000003ca8f4> __free_slab+0x1c4/0x6b0
  Kernel panic - not syncing: Fatal exception in interrupt

The kernel panics on an attempt to dereference the NULL memcg pointer.
When shutdown_cache() is called from the kmem_cache_destroy() context, a
memcg kmem_cache might have empty slab pages in a partial list, which are
still charged to the memory cgroup.

These pages are released by free_partial() at the beginning of
shutdown_cache(): either directly or by scheduling a RCU-delayed work
(if the kmem_cache has the SLAB_TYPESAFE_BY_RCU flag).  The latter case
is when the reported panic can happen: memcg_unlink_cache() is called
immediately after shrinking partial lists, without waiting for scheduled
RCU works.  It sets the kmem_cache->memcg_params.memcg pointer to NULL,
and the following attempt to dereference it by __free_slab() from the
RCU work context causes the panic.

To fix the issue, let's postpone the release of the memcg pointer to
destroy_memcg_params().  It's called from a separate work context by
slab_caches_to_rcu_destroy_workfn(), which contains a full RCU barrier.
This guarantees that all scheduled page release RCU works will complete
before the memcg pointer will be zeroed.

Big thanks for Karsten for the perfect report containing all necessary
information, his help with the analysis of the problem and testing of the
fix.

Link: http://lkml.kernel.org/r/20191010160549.1584316-1-guro@fb.com
Fixes: fb2f2b0adb98 ("mm: memcg/slab: reparent memcg kmem_caches on cgroup removal")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Karsten Graul <kgraul@linux.ibm.com>
Tested-by: Karsten Graul <kgraul@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/memunmap: don't access uninitialized memmap in memunmap_pages()
Aneesh Kumar K.V [Sat, 19 Oct 2019 03:19:39 +0000 (20:19 -0700)]
mm/memunmap: don't access uninitialized memmap in memunmap_pages()

Patch series "mm/memory_hotplug: Shrink zones before removing memory",
v6.

This series fixes the access of uninitialized memmaps when shrinking
zones/nodes and when removing memory.  Also, it contains all fixes for
crashes that can be triggered when removing certain namespace using
memunmap_pages() - ZONE_DEVICE, reported by Aneesh.

We stop trying to shrink ZONE_DEVICE, as it's buggy, fixing it would be
more involved (we don't have SECTION_IS_ONLINE as an indicator), and
shrinking is only of limited use (set_zone_contiguous() cannot detect
the ZONE_DEVICE as contiguous).

We continue shrinking !ZONE_DEVICE zones, however, I reduced the amount
of code to a minimum.  Shrinking is especially necessary to keep
zone->contiguous set where possible, especially, on memory unplug of
DIMMs at zone boundaries.

--------------------------------------------------------------------------

Zones are now properly shrunk when offlining memory blocks or when
onlining failed.  This allows to properly shrink zones on memory unplug
even if the separate memory blocks of a DIMM were onlined to different
zones or re-onlined to a different zone after offlining.

Example:

  :/# cat /proc/zoneinfo
  Node 1, zone  Movable
          spanned  0
          present  0
          managed  0
  :/# echo "online_movable" > /sys/devices/system/memory/memory41/state
  :/# echo "online_movable" > /sys/devices/system/memory/memory43/state
  :/# cat /proc/zoneinfo
  Node 1, zone  Movable
          spanned  98304
          present  65536
          managed  65536
  :/# echo 0 > /sys/devices/system/memory/memory43/online
  :/# cat /proc/zoneinfo
  Node 1, zone  Movable
          spanned  32768
          present  32768
          managed  32768
  :/# echo 0 > /sys/devices/system/memory/memory41/online
  :/# cat /proc/zoneinfo
  Node 1, zone  Movable
          spanned  0
          present  0
          managed  0

This patch (of 10):

With an altmap, the memmap falling into the reserved altmap space are not
initialized and, therefore, contain a garbage NID and a garbage zone.
Make sure to read the NID/zone from a memmap that was initialized.

This fixes a kernel crash that is observed when destroying a namespace:

  kernel BUG at include/linux/mm.h:1107!
  cpu 0x1: Vector: 700 (Program Check) at [c000000274087890]
      pc: c0000000004b9728: memunmap_pages+0x238/0x340
      lr: c0000000004b9724: memunmap_pages+0x234/0x340
  ...
      pid   = 3669, comm = ndctl
  kernel BUG at include/linux/mm.h:1107!
    devm_action_release+0x30/0x50
    release_nodes+0x268/0x2d0
    device_release_driver_internal+0x174/0x240
    unbind_store+0x13c/0x190
    drv_attr_store+0x44/0x60
    sysfs_kf_write+0x70/0xa0
    kernfs_fop_write+0x1ac/0x290
    __vfs_write+0x3c/0x70
    vfs_write+0xe4/0x200
    ksys_write+0x7c/0x140
    system_call+0x5c/0x68

The "page_zone(pfn_to_page(pfn)" was introduced by 69324b8f4833 ("mm,
devm_memremap_pages: add MEMORY_DEVICE_PRIVATE support"), however, I
think we will never have driver reserved memory with
MEMORY_DEVICE_PRIVATE (no altmap AFAIKS).

[david@redhat.com: minimze code changes, rephrase description]
Link: http://lkml.kernel.org/r/20191006085646.5768-2-david@redhat.com
Fixes: 2c2a5af6fed2 ("mm, memory_hotplug: add nid parameter to arch_remove_memory")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Damian Tometzki <damian.tometzki@gmail.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()
David Hildenbrand [Sat, 19 Oct 2019 03:19:33 +0000 (20:19 -0700)]
mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()

We might use the nid of memmaps that were never initialized.  For
example, if the memmap was poisoned, we will crash the kernel in
pfn_to_nid() right now.  Let's use the calculated boundaries of the
separate zones instead.  This now also avoids having to iterate over a
whole bunch of subsections again, after shrinking one zone.

Before commit d0dc12e86b31 ("mm/memory_hotplug: optimize memory
hotplug"), the memmap was initialized to 0 and the node was set to the
right value.  After that commit, the node might be garbage.

We'll have to fix shrink_zone_span() next.

Link: http://lkml.kernel.org/r/20191006085646.5768-4-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Damian Tometzki <damian.tometzki@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/page_owner: don't access uninitialized memmaps when reading /proc/pagetypeinfo
Qian Cai [Sat, 19 Oct 2019 03:19:29 +0000 (20:19 -0700)]
mm/page_owner: don't access uninitialized memmaps when reading /proc/pagetypeinfo

Uninitialized memmaps contain garbage and in the worst case trigger
kernel BUGs, especially with CONFIG_PAGE_POISONING.  They should not get
touched.

For example, when not onlining a memory block that is spanned by a zone
and reading /proc/pagetypeinfo with CONFIG_DEBUG_VM_PGFLAGS and
CONFIG_PAGE_POISONING, we can trigger a kernel BUG:

  :/# echo 1 > /sys/devices/system/memory/memory40/online
  :/# echo 1 > /sys/devices/system/memory/memory42/online
  :/# cat /proc/pagetypeinfo > test.file
   page:fffff2c585200000 is uninitialized and poisoned
   raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
   raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
   page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
   There is not page extension available.
   ------------[ cut here ]------------
   kernel BUG at include/linux/mm.h:1107!
   invalid opcode: 0000 [#1] SMP NOPTI

Please note that this change does not affect ZONE_DEVICE, because
pagetypeinfo_showmixedcount_print() is called from
mm/vmstat.c:pagetypeinfo_showmixedcount() only for populated zones, and
ZONE_DEVICE is never populated (zone->present_pages always 0).

[david@redhat.com: move check to outer loop, add comment, rephrase description]
Link: http://lkml.kernel.org/r/20191011140638.8160-1-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visible after d0dc12e86b319
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoscripts/gdb: fix lx-dmesg when CONFIG_PRINTK_CALLER is set
Joel Colledge [Sat, 19 Oct 2019 03:19:26 +0000 (20:19 -0700)]
scripts/gdb: fix lx-dmesg when CONFIG_PRINTK_CALLER is set

When CONFIG_PRINTK_CALLER is set, struct printk_log contains an
additional member caller_id.  This affects the offset of the log text.
Account for this by using the type information from gdb to determine all
the offsets instead of using hardcoded values.

This fixes following error:

  (gdb) lx-dmesg
  Python Exception <class 'ValueError'> embedded null character:
  Error occurred in Python command: embedded null character

The read_u* utility functions now take an offset argument to make them
easier to use.

Link: http://lkml.kernel.org/r/20191011142500.2339-1-joel.colledge@linbit.com
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/memory-failure.c: don't access uninitialized memmaps in memory_failure()
David Hildenbrand [Sat, 19 Oct 2019 03:19:23 +0000 (20:19 -0700)]
mm/memory-failure.c: don't access uninitialized memmaps in memory_failure()

We should check for pfn_to_online_page() to not access uninitialized
memmaps.  Reshuffle the code so we don't have to duplicate the error
message.

Link: http://lkml.kernel.org/r/20191009142435.3975-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agofs/proc/page.c: don't access uninitialized memmaps in fs/proc/page.c
David Hildenbrand [Sat, 19 Oct 2019 03:19:20 +0000 (20:19 -0700)]
fs/proc/page.c: don't access uninitialized memmaps in fs/proc/page.c

There are three places where we access uninitialized memmaps, namely:
- /proc/kpagecount
- /proc/kpageflags
- /proc/kpagecgroup

We have initialized memmaps either when the section is online or when the
page was initialized to the ZONE_DEVICE.  Uninitialized memmaps contain
garbage and in the worst case trigger kernel BUGs, especially with
CONFIG_PAGE_POISONING.

For example, not onlining a DIMM during boot and calling /proc/kpagecount
with CONFIG_PAGE_POISONING:

  :/# cat /proc/kpagecount > tmp.test
  BUG: unable to handle page fault for address: fffffffffffffffe
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 114616067 P4D 114616067 PUD 114618067 PMD 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 469 Comm: cat Not tainted 5.4.0-rc1-next-20191004+ #11
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
  RIP: 0010:kpagecount_read+0xce/0x1e0
  Code: e8 09 83 e0 3f 48 0f a3 02 73 2d 4c 89 e7 48 c1 e7 06 48 03 3d ab 51 01 01 74 1d 48 8b 57 08 480
  RSP: 0018:ffffa14e409b7e78 EFLAGS: 00010202
  RAX: fffffffffffffffe RBX: 0000000000020000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 00007f76b5595000 RDI: fffff35645000000
  RBP: 00007f76b5595000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
  R13: 0000000000020000 R14: 00007f76b5595000 R15: ffffa14e409b7f08
  FS:  00007f76b577d580(0000) GS:ffff8f41bd400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: fffffffffffffffe CR3: 0000000078960000 CR4: 00000000000006f0
  Call Trace:
   proc_reg_read+0x3c/0x60
   vfs_read+0xc5/0x180
   ksys_read+0x68/0xe0
   do_syscall_64+0x5c/0xa0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

For now, let's drop support for ZONE_DEVICE from the three pseudo files
in order to fix this.  To distinguish offline memory (with garbage
memmap) from ZONE_DEVICE memory with properly initialized memmaps, we
would have to check get_dev_pagemap() and pfn_zone_device_reserved()
right now.  The usage of both (especially, special casing devmem) is
frowned upon and needs to be reworked.

The fundamental issue we have is:

if (pfn_to_online_page(pfn)) {
/* memmap initialized */
} else if (pfn_valid(pfn)) {
/*
 * ???
 * a) offline memory. memmap garbage.
 * b) devmem: memmap initialized to ZONE_DEVICE.
 * c) devmem: reserved for driver. memmap garbage.
 * (d) devmem: memmap currently initializing - garbage)
 */
}

We'll leave the pfn_zone_device_reserved() check in stable_page_flags()
in place as that function is also used from memory failure.  We now no
longer dump information about pages that are not in use anymore -
offline.

Link: http://lkml.kernel.org/r/20191009142435.3975-2-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agodrivers/base/memory.c: don't access uninitialized memmaps in soft_offline_page_store()
David Hildenbrand [Sat, 19 Oct 2019 03:19:16 +0000 (20:19 -0700)]
drivers/base/memory.c: don't access uninitialized memmaps in soft_offline_page_store()

Uninitialized memmaps contain garbage and in the worst case trigger kernel
BUGs, especially with CONFIG_PAGE_POISONING.  They should not get touched.

Right now, when trying to soft-offline a PFN that resides on a memory
block that was never onlined, one gets a misleading error with
CONFIG_PAGE_POISONING:

  :/# echo 5637144576 > /sys/devices/system/memory/soft_offline_page
  [   23.097167] soft offline: 0x150000 page already poisoned

But the actual result depends on the garbage in the memmap.

soft_offline_page() can only work with online pages, it returns -EIO in
case of ZONE_DEVICE.  Make sure to only forward pages that are online
(iow, managed by the buddy) and, therefore, have an initialized memmap.

Add a check against pfn_to_online_page() and similarly return -EIO.

Link: http://lkml.kernel.org/r/20191010141200.8985-1-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoMerge tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 19 Oct 2019 02:29:36 +0000 (22:29 -0400)]
Merge tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Keith that address deadlocks, double resets,
   memory leaks, and other regression.

 - Fixup elv_support_iosched() for bio based devices (Damien)

 - Fixup for the ahci PCS quirk (Dan)

 - Socket O_NONBLOCK handling fix for io_uring (me)

 - Timeout sequence io_uring fixes (yangerkun)

 - MD warning fix for parameter default_layout (Song)

 - blkcg activation fixes (Tejun)

 - blk-rq-qos node deletion fix (Tejun)

* tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block:
  nvme-pci: Set the prp2 correctly when using more than 4k page
  io_uring: fix logic error in io_timeout
  io_uring: fix up O_NONBLOCK handling for sockets
  md/raid0: fix warning message for parameter default_layout
  libata/ahci: Fix PCS quirk application
  blk-rq-qos: fix first node deletion of rq_qos_del()
  blkcg: Fix multiple bugs in blkcg_activate_policy()
  io_uring: consider the overflow of sequence for timeout req
  nvme-tcp: fix possible leakage during error flow
  nvmet-loop: fix possible leakage during error flow
  block: Fix elv_support_iosched()
  nvme-tcp: Initialize sk->sk_ll_usec only with NET_RX_BUSY_POLL
  nvme: Wait for reset state when required
  nvme: Prevent resets during paused controller state
  nvme: Restart request timers in resetting state
  nvme: Remove ADMIN_ONLY state
  nvme-pci: Free tagset if no IO queues
  nvme: retain split access workaround for capability reads
  nvme: fix possible deadlock when nvme_update_formats fails

5 years agoMerge tag 'riscv/for-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv...
Linus Torvalds [Sat, 19 Oct 2019 02:26:18 +0000 (22:26 -0400)]
Merge tag 'riscv/for-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:
 "Some RISC-V fixes:

   - Fix the virtual memory layout so the fixaddr region doesn't overlap
     with other regions. (This was originally intended to go in as part
     of an earlier patch, but I inadvertently dropped it during a
     rebase)

   - Add the DT chosen/stdout-path property to the HiFive Unleashed DT
     file. This is so "earlycon" can be specified with no arguments on
     the kernel command line, and the correct UART will be automatically
     selected.

  And two cleanup patches:

   - Simplify the code in our breakpoint trap handler.

   - Drop a comment in our TLB flush code that has caused some
     confusion"

* tag 'riscv/for-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: fix virtual address overlapped in FIXADDR_START and VMEMMAP_START
  riscv: tlbflush: remove confusing comment on local_flush_tlb_all()
  riscv: dts: HiFive Unleashed: add default chosen/stdout-path
  riscv: remove the switch statement in do_trap_break()

5 years agofilldir[64]: remove WARN_ON_ONCE() for bad directory entries
Linus Torvalds [Fri, 18 Oct 2019 22:41:16 +0000 (18:41 -0400)]
filldir[64]: remove WARN_ON_ONCE() for bad directory entries

This was always meant to be a temporary thing, just for testing and to
see if it actually ever triggered.

The only thing that reported it was syzbot doing disk image fuzzing, and
then that warning is expected.  So let's just remove it before -rc4,
because the extra sanity testing should probably go to -stable, but we
don't want the warning to do so.

Reported-by: syzbot+3031f712c7ad5dd4d926@syzkaller.appspotmail.com
Fixes: 8a23eb804ca4 ("Make filldir[64]() verify the directory entry filename is valid")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoMerge tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-client
Linus Torvalds [Fri, 18 Oct 2019 22:30:09 +0000 (18:30 -0400)]
Merge tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "A future-proofing decoding fix from Jeff intended for stable and a
  patch for a mostly benign race from Dongsheng"

* tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-client:
  rbd: cancel lock_dwork if the wait is interrupted
  ceph: just skip unrecognized info in ceph_reply_info_extra

5 years agoMerge tag 'for-5.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device...
Linus Torvalds [Fri, 18 Oct 2019 22:26:07 +0000 (18:26 -0400)]
Merge tag 'for-5.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM snapshot deadlock that can occur due to COW throttling
   preventing locks from being released.

 - Fix DM cache's GFP_NOWAIT allocation failure error paths by switching
   to GFP_NOIO.

 - Make __hash_find() static in the DM clone target.

* tag 'for-5.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix bugs when a GFP_NOWAIT allocation fails
  dm snapshot: rework COW throttling to fix deadlock
  dm snapshot: introduce account_start_copy() and account_end_copy()
  dm clone: Make __hash_find static

5 years agoMerge tag 'iommu-fixes-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 18 Oct 2019 22:23:16 +0000 (18:23 -0400)]
Merge tag 'iommu-fixes-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

 - Fixes for page-table issues on Mali GPUs

 - Missing free in an error path for ARM-SMMU

 - PASID decoding in the AMD IOMMU Event log code

 - Another update for the locking fixes in the AMD IOMMU driver

 - Reduce the calls to platform_get_irq() in the IPMMU-VMSA and Rockchip
   IOMMUs to get rid of the warning message added to this function
   recently

* tag 'iommu-fixes-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Check PM_LEVEL_SIZE() condition in locked section
  iommu/amd: Fix incorrect PASID decoding from event log
  iommu/ipmmu-vmsa: Only call platform_get_irq() when interrupt is mandatory
  iommu/rockchip: Don't use platform_get_irq to implicitly count irqs
  iommu/io-pgtable-arm: Support all Mali configurations
  iommu/io-pgtable-arm: Correct Mali attributes
  iommu/arm-smmu: Free context bitmap in the err path of arm_smmu_init_domain_context

5 years agoMerge tag 'copy-struct-from-user-v5.4-rc4' of gitolite.kernel.org:pub/scm/linux/kerne...
Linus Torvalds [Fri, 18 Oct 2019 22:19:04 +0000 (18:19 -0400)]
Merge tag 'copy-struct-from-user-v5.4-rc4' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux

Pull usercopy test fixlets from Christian Brauner:
 "This contains two improvements for the copy_struct_from_user() tests:

   - a coding style change to get rid of the ugly "if ((ret |= test()))"
     pointed out when pulling the original patchset.

   - avoid a soft lockups when running the usercopy tests on machines
     with large page sizes by scanning only a 1024 byte region"

* tag 'copy-struct-from-user-v5.4-rc4' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  usercopy: Avoid soft lockups in test_check_nonzero_user()
  lib: test_user_copy: style cleanup

5 years agoMerge branch 'lpc_eth-parse-phy-nodes-from-device-tree'
David S. Miller [Fri, 18 Oct 2019 20:12:35 +0000 (13:12 -0700)]
Merge branch 'lpc_eth-parse-phy-nodes-from-device-tree'

Alexandre Belloni says:

====================
net: lpc_eth: parse phy nodes from device tree

Allow describing connected phys using device tree. This solves issues finding
the phy on the mdio bus and allows decribing the interrupt line the phy is
possibly connected to.

Changes in v3:
 - rebased on net-next
 - collected Reviewed-by

Changes in v2:
 - move the phy decription in the mdio subnode.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: lpc_eth: parse phy nodes from device tree
Alexandre Belloni [Thu, 17 Oct 2019 22:22:31 +0000 (00:22 +0200)]
net: lpc_eth: parse phy nodes from device tree

When connected to a micrel phy, phy_find_first doesn't work properly
because the first phy found is on address 0, the broadcast address but, the
first thing the phy driver is doing is disabling this broadcast address.
The phy is then available only on address 1 but the mdio driver doesn't
know about it.

Instead, register the mdio bus using of_mdiobus_register and try to find
the phy description in device tree before falling back to phy_find_first.

This ultimately also allows to describe the interrupt the phy is connected
to.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agodt-bindings: net: lpc-eth: document optional properties
Alexandre Belloni [Thu, 17 Oct 2019 22:22:30 +0000 (00:22 +0200)]
dt-bindings: net: lpc-eth: document optional properties

The Ethernet controller is also an mdio controller, to be able to parse
children (phys for example), and mdio node must be present.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: usb: lan78xx: Connect PHY before registering MAC
Andrew Lunn [Thu, 17 Oct 2019 19:29:26 +0000 (21:29 +0200)]
net: usb: lan78xx: Connect PHY before registering MAC

As soon as the netdev is registers, the kernel can start using the
interface. If the driver connects the MAC to the PHY after the netdev
is registered, there is a race condition where the interface can be
opened without having the PHY connected.

Change the order to close this race condition.

Fixes: 92571a1aae40 ("lan78xx: Connect phy early")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'vsock-virtio-make-the-credit-mechanism-more-robust'
David S. Miller [Fri, 18 Oct 2019 17:19:43 +0000 (10:19 -0700)]
Merge branch 'vsock-virtio-make-the-credit-mechanism-more-robust'

Stefano Garzarella says:

====================
vsock/virtio: make the credit mechanism more robust

This series makes the credit mechanism implemented in the
virtio-vsock devices more robust.
Patch 1 sends an update to the remote peer when the buf_alloc
change.
Patch 2 prevents a malicious peer (especially the guest) can
consume all the memory of the other peer, discarding packets
when the credit available is not respected.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agovsock/virtio: discard packets if credit is not respected
Stefano Garzarella [Thu, 17 Oct 2019 12:44:03 +0000 (14:44 +0200)]
vsock/virtio: discard packets if credit is not respected

If the remote peer doesn't respect the credit information
(buf_alloc, fwd_cnt), sending more data than it can send,
we should drop the packets to prevent a malicious peer
from using all of our memory.

This is patch follows the VIRTIO spec: "VIRTIO_VSOCK_OP_RW data
packets MUST only be transmitted when the peer has sufficient
free buffer space for the payload"

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agovsock/virtio: send a credit update when buffer size is changed
Stefano Garzarella [Thu, 17 Oct 2019 12:44:02 +0000 (14:44 +0200)]
vsock/virtio: send a credit update when buffer size is changed

When the user application set a new buffer size value, we should
update the remote peer about this change, since it uses this
information to calculate the credit available.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agomlxsw: spectrum_trap: Push Ethernet header before reporting trap
Ido Schimmel [Thu, 17 Oct 2019 07:11:03 +0000 (10:11 +0300)]
mlxsw: spectrum_trap: Push Ethernet header before reporting trap

devlink maintains packets and bytes statistics for each trap. Since
eth_type_trans() was called to set the skb's protocol, the data pointer
no longer points to the start of the packet and the bytes accounting is
off by 14 bytes.

Fix this by pushing the skb's data pointer to the start of the packet.

Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'selftests-mlxsw-Add-scale-tests-for-Spectrum-2'
David S. Miller [Fri, 18 Oct 2019 17:05:37 +0000 (10:05 -0700)]
Merge branch 'selftests-mlxsw-Add-scale-tests-for-Spectrum-2'

Ido Schimmel says:

====================
selftests: mlxsw: Add scale tests for Spectrum-2

This series from Danielle adds two scale tests for the Spectrum-2 ASIC.

The first scale test (patches #1-#4) validates the number of mirroring
sessions (using tc-mirred) that can be supported by the device. As a
preparatory step, patch #1 exposes the maximum number and current usage
of mirroring agents via devlink-resource. This allows us to avoid
hard-coding the limits later in the test.

The second scale test (patch #5) validates the number of tc-flower
filters that can be supported by the device.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoselftests: mlxsw: Add Spectrum-2 target scale for tc flower scale test
Danielle Ratson [Thu, 17 Oct 2019 06:55:18 +0000 (09:55 +0300)]
selftests: mlxsw: Add Spectrum-2 target scale for tc flower scale test

Return the maximum number of tc flower filters that can be offloaded.
Currently, this value corresponds to the number of counters supported by
the driver.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoselftests: mlxsw: Add a resource scale test for Spectrum-2
Danielle Ratson [Thu, 17 Oct 2019 06:55:17 +0000 (09:55 +0300)]
selftests: mlxsw: Add a resource scale test for Spectrum-2

Add resource_scale test suitable for Spectrum-2.

Invoke the mirror_gre test and check that the advertised scale numbers
are indeed supported.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoselftests: mlxsw: Add Spectrum-2 mirror-to-gretap target scale test
Danielle Ratson [Thu, 17 Oct 2019 06:55:16 +0000 (09:55 +0300)]
selftests: mlxsw: Add Spectrum-2 mirror-to-gretap target scale test

Like in Spectrum, use the number of analyzers taken from the devlink
command.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoselftests: mlxsw: Generalize the parameters of mirror_gre test
Danielle Ratson [Thu, 17 Oct 2019 06:55:15 +0000 (09:55 +0300)]
selftests: mlxsw: Generalize the parameters of mirror_gre test

Use the number of analyzers taken from the devlink command, instead of
hard-coded value, in order to make the test more generic.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agomlxsw: spectrum: Register switched port analyzers (SPAN) as resource
Danielle Ratson [Thu, 17 Oct 2019 06:55:14 +0000 (09:55 +0300)]
mlxsw: spectrum: Register switched port analyzers (SPAN) as resource

The switch supports an enhanced switched port analyzer that enables
selecting network traffic for analysis by a network analyzer.

SPAN agents are configured and consumed whenever a tc filter is added
with a mirror action to a new destination. The destination can either be
a physical port (e.g., swp1), a VLAN device or a gretap.

Expose the maximum number of SPAN agents and their current usage to the
user.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: ensure correct skb->tstamp in various fragmenters
Eric Dumazet [Thu, 17 Oct 2019 01:00:56 +0000 (18:00 -0700)]
net: ensure correct skb->tstamp in various fragmenters

Thomas found that some forwarded packets would be stuck
in FQ packet scheduler because their skb->tstamp contained
timestamps far in the future.

We thought we addressed this point in commit 8203e2d844d3
("net: clear skb->tstamp in forwarding paths") but there
is still an issue when/if a packet needs to be fragmented.

In order to meet EDT requirements, we have to make sure all
fragments get the original skb->tstamp.

Note that this original skb->tstamp should be zero in
forwarding path, but might have a non zero value in
output path if user decided so.

Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thomas Bartschies <Thomas.Bartschies@cvk.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge tag 'mmc-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Linus Torvalds [Fri, 18 Oct 2019 17:00:46 +0000 (10:00 -0700)]
Merge tag 'mmc-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC host:
   - sdhci-iproc: Prevent some spurious interrupts
   - renesas_sdhi/sh_mmcif: Avoid false warnings about IRQs not found

  MEMSTICK host:
   - jmb38x_ms: Fix an error handling path at ->probe()"

* tag 'mmc-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  memstick: jmb38x_ms: Fix an error handling path in 'jmb38x_ms_probe()'
  mmc: sdhci-iproc: fix spurious interrupts on Multiblock reads with bcm2711
  mmc: sh_mmcif: Use platform_get_irq_optional() for optional interrupt
  mmc: renesas_sdhi: Do not use platform_get_irq() to count interrupts

5 years agoMerge branch 'net-bcmgenet-restore-internal-EPHY-support'
David S. Miller [Fri, 18 Oct 2019 17:00:07 +0000 (10:00 -0700)]
Merge branch 'net-bcmgenet-restore-internal-EPHY-support'

Doug Berger says:

====================
net: bcmgenet: restore internal EPHY support

I managed to get my hands on an old BCM97435SVMB board to do some
testing with the latest kernel and uncovered a number of things
that managed to get broken over the years (some by me ;).

This commit set attempts to correct the errors I observed in my
testing.

The first commit applies to all internal PHYs to restore proper
reporting of link status when a link comes up.

The second commit restores the soft reset to the initialization of
the older internal EPHYs used by 40nm Set-Top Box devices.

The third corrects a bug I introduced when removing excessive soft
resets by altering the initialization sequence in a way that keeps
the GENETv3 MAC interface happy.

Finally, I observed a number of issues when manually configuring
the network interface of the older EPHYs that appear to be resolved
by the fourth commit.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: bcmgenet: reset 40nm EPHY on energy detect
Doug Berger [Wed, 16 Oct 2019 23:06:32 +0000 (16:06 -0700)]
net: bcmgenet: reset 40nm EPHY on energy detect

The EPHY integrated into the 40nm Set-Top Box devices can falsely
detect energy when connected to a disabled peer interface. When the
peer interface is enabled the EPHY will detect and report the link
as active, but on occasion may get into a state where it is not
able to exchange data with the connected GENET MAC. This issue has
not been observed when the link parameters are auto-negotiated;
however, it has been observed with a manually configured link.

It has been empirically determined that issuing a soft reset to the
EPHY when energy is detected prevents it from getting into this bad
state.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: bcmgenet: soft reset 40nm EPHYs before MAC init
Doug Berger [Wed, 16 Oct 2019 23:06:31 +0000 (16:06 -0700)]
net: bcmgenet: soft reset 40nm EPHYs before MAC init

It turns out that the "Workaround for putting the PHY in IDDQ mode"
used by the internal EPHYs on 40nm Set-Top Box chips when powering
down puts the interface to the GENET MAC in a state that can cause
subsequent MAC resets to be incomplete.

Rather than restore the forced soft reset when powering up internal
PHYs, this commit moves the invocation of phy_init_hw earlier in
the MAC initialization sequence to just before the MAC reset in the
open and resume functions. This allows the interface to be stable
and allows the MAC resets to be successful.

The bcmgenet_mii_probe() function is split in two to accommodate
this. The new function bcmgenet_mii_connect() handles the first
half of the functionality before the MAC initialization, and the
bcmgenet_mii_config() function is extended to provide the remaining
PHY configuration following the MAC initialization.

Fixes: 484bfa1507bf ("Revert "net: bcmgenet: Software reset EPHY after power on"")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: phy: bcm7xxx: define soft_reset for 40nm EPHY
Doug Berger [Wed, 16 Oct 2019 23:06:30 +0000 (16:06 -0700)]
net: phy: bcm7xxx: define soft_reset for 40nm EPHY

The internal 40nm EPHYs use a "Workaround for putting the PHY in
IDDQ mode." These PHYs require a soft reset to restore functionality
after they are powered back up.

This commit defines the soft_reset function to use genphy_soft_reset
during phy_init_hw to accommodate this.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: bcmgenet: don't set phydev->link from MAC
Doug Berger [Wed, 16 Oct 2019 23:06:29 +0000 (16:06 -0700)]
net: bcmgenet: don't set phydev->link from MAC

When commit 28b2e0d2cd13 ("net: phy: remove parameter new_link from
phy_mac_interrupt()") removed the new_link parameter it set the
phydev->link state from the MAC before invoking phy_mac_interrupt().

However, once commit 88d6272acaaa ("net: phy: avoid unneeded MDIO
reads in genphy_read_status") was added this initialization prevents
the proper determination of the connection parameters by the function
genphy_read_status().

This commit removes that initialization to restore the proper
functionality.

Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: phy: avoid NPE if read_page/write_page callbacks are not available
Heiner Kallweit [Wed, 16 Oct 2019 19:53:31 +0000 (21:53 +0200)]
net: phy: avoid NPE if read_page/write_page callbacks are not available

Currently there's a bug in the module subsystem [0] preventing load of
the PHY driver module on certain systems (as one symptom).
This results in a NPE on such systems for the following reason:
Instead of the correct PHY driver the genphy driver is loaded that
doesn't implement the read_page/write_page callbacks. Every call to
phy_read_paged() et al will result in a NPE therefore.

In parallel to fixing the root cause we should make sure that this one
and maybe similar issues in other subsystems don't result in a NPE
in phylib. So let's check for the callbacks before using them and warn
once if they are not available.

[0] https://marc.info/?t=157072642100001&r=1&w=2

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: dsa: sja1105: Switch to hardware operations for PTP
Vladimir Oltean [Wed, 16 Oct 2019 18:41:02 +0000 (21:41 +0300)]
net: dsa: sja1105: Switch to hardware operations for PTP

Adjusting the hardware clock (PTPCLKVAL, PTPCLKADD, PTPCLKRATE) is a
requirement for the auxiliary PTP functionality of the switch
(TTEthernet, PPS input, PPS output).

Therefore we need to switch to using these registers to keep a
synchronized time in hardware, instead of the timecounter/cyclecounter
implementation, which is reliant on the free-running PTPTSCLK.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge tag 'sound-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Fri, 18 Oct 2019 16:21:13 +0000 (09:21 -0700)]
Merge tag 'sound-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Just a few small fixes for the usual suspect, HD- and USB-audio:
  enablement of runtime PM for Nvidia due to the recent PCI changes, a
  fix for potential hangs with recent HD-audio platforms, and the rest
  device-specific quirks"

* tag 'sound-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Force runtime PM on Nvidia HDMI codecs
  ALSA: hda/realtek - Enable headset mic on Asus MJ401TA
  ALSA: usb-audio: Disable quirks for BOSS Katana amplifiers
  ALSA: hdac: clear link output stream mapping
  ALSA: hda/realtek: Reduce the Headphone static noise on XPS 9350/9360

5 years agoMerge tag 'acpi-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Fri, 18 Oct 2019 15:38:26 +0000 (08:38 -0700)]
Merge tag 'acpi-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "Fix possible use-after-free in the ACPI CPPC support code (John Garry)
  and prevent the ACPI HMAT parsing code from using possibly incorrect
  data coming from the platform firmware (Daniel Black)"

* tag 'acpi-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: CPPC: Set pcc_data[pcc_ss_id] to NULL in acpi_cppc_processor_exit()
  ACPI: HMAT: ACPI_HMAT_MEMORY_PD_VALID is deprecated since ACPI-6.3

5 years agoMerge tag 'pm-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Fri, 18 Oct 2019 15:34:04 +0000 (08:34 -0700)]
Merge tag 'pm-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These include a fix for a recent regression in the ACPI CPU
performance scaling code, a PCI device power management fix,
a system shutdown fix related to cpufreq, a removal of an ACPI
suspend-to-idle blacklist entry and a build warning fix.

Specifics:

   - Fix possible NULL pointer dereference in the ACPI processor scaling
     initialization code introduced by a recent cpufreq update (Rafael
     Wysocki).

   - Fix possible deadlock due to suspending cpufreq too late during
     system shutdown (Rafael Wysocki).

   - Make the PCI device system resume code path be more consistent with
     its PM-runtime counterpart to fix an issue with missing delay on
     transitions from D3cold to D0 during system resume from
     suspend-to-idle on some systems (Rafael Wysocki).

   - Drop Dell XPS13 9360 from the LPS0 Idle _DSM blacklist to make it
     use suspend-to-idle by default (Mario Limonciello).

   - Fix build warning in the core system suspend support code (Ben
     Dooks)"

* tag 'pm-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: processor: Avoid NULL pointer dereferences at init time
  PCI: PM: Fix pci_power_up()
  PM: sleep: include <linux/pm_runtime.h> for pm_wq
  cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown
  ACPI: PM: Drop Dell XPS13 9360 from LPS0 Idle _DSM blacklist

5 years agoMerge tag 'mkp-scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp...
Linus Torvalds [Fri, 18 Oct 2019 15:08:53 +0000 (08:08 -0700)]
Merge tag 'mkp-scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi

Pull scsi fixes from Martin Petersen:
 "These two commits were in a separate postmerge branch due to a
  dependency on changes merged for 5.4 in the block tree.

  They fix two issues in the intersection of the request cleanup changes
  from block (b7e9e1fb7a92) and the request batching changes
  (8930a6c20791) that were made to SCSI during the 5.4 cycle"

* tag 'mkp-scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi:
  scsi: core: fix dh and multipathing for SCSI hosts without request batching
  scsi: core: fix missing .cleanup_rq for SCSI hosts without request batching

5 years agoiommu/amd: Check PM_LEVEL_SIZE() condition in locked section
Joerg Roedel [Fri, 18 Oct 2019 09:34:22 +0000 (11:34 +0200)]
iommu/amd: Check PM_LEVEL_SIZE() condition in locked section

The increase_address_space() function has to check the PM_LEVEL_SIZE()
condition again under the domain->lock to avoid a false trigger of the
WARN_ON_ONCE() and to avoid that the address space is increase more
often than necessary.

Reported-by: Qian Cai <cai@lca.pw>
Fixes: 754265bcab78 ("iommu/amd: Fix race in increase_address_space()")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
5 years agoMerge branch 'nvme-5.4' of git://git.infradead.org/nvme into for-linus
Jens Axboe [Fri, 18 Oct 2019 14:49:25 +0000 (08:49 -0600)]
Merge branch 'nvme-5.4' of git://git.infradead.org/nvme into for-linus

Pull NVMe updates from Keith:

"This is a collection of bug fixes committed since the previous pull
 request that address deadlocks, double resets, memory leaks, and other
 regression."

* 'nvme-5.4' of git://git.infradead.org/nvme:
  nvme-pci: Set the prp2 correctly when using more than 4k page
  nvme-tcp: fix possible leakage during error flow
  nvmet-loop: fix possible leakage during error flow
  nvme-tcp: Initialize sk->sk_ll_usec only with NET_RX_BUSY_POLL
  nvme: Wait for reset state when required
  nvme: Prevent resets during paused controller state
  nvme: Restart request timers in resetting state
  nvme: Remove ADMIN_ONLY state
  nvme-pci: Free tagset if no IO queues
  nvme: retain split access workaround for capability reads
  nvme: fix possible deadlock when nvme_update_formats fails

5 years agonvme-pci: Set the prp2 correctly when using more than 4k page
Kevin Hao [Fri, 18 Oct 2019 02:53:14 +0000 (10:53 +0800)]
nvme-pci: Set the prp2 correctly when using more than 4k page

In the current code, the nvme is using a fixed 4k PRP entry size,
but if the kernel use a page size which is more than 4k, we should
consider the situation that the bv_offset may be larger than the
dev->ctrl.page_size. Otherwise we may miss setting the prp2 and then
cause the command can't be executed correctly.

Fixes: dff824b2aadb ("nvme-pci: optimize mapping of small single segment requests")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
5 years agoMerge branch 'acpi-tables'
Rafael J. Wysocki [Fri, 18 Oct 2019 08:39:21 +0000 (10:39 +0200)]
Merge branch 'acpi-tables'

* acpi-tables:
  ACPI: HMAT: ACPI_HMAT_MEMORY_PD_VALID is deprecated since ACPI-6.3

5 years agoACPI: CPPC: Set pcc_data[pcc_ss_id] to NULL in acpi_cppc_processor_exit()
John Garry [Tue, 15 Oct 2019 14:07:31 +0000 (22:07 +0800)]
ACPI: CPPC: Set pcc_data[pcc_ss_id] to NULL in acpi_cppc_processor_exit()

When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN
warning:

[   20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8
[   20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1
[   20.884826]
[   20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289
[   20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
[   20.903505] Call trace:
[   20.905942]  dump_backtrace+0x0/0x200
[   20.909593]  show_stack+0x14/0x20
[   20.912899]  dump_stack+0xd4/0x130
[   20.916291]  print_address_description.isra.9+0x6c/0x3b8
[   20.921592]  __kasan_report+0x12c/0x23c
[   20.925417]  kasan_report+0xc/0x18
[   20.928808]  __asan_load4+0x94/0xb8
[   20.932286]  pcc_data_alloc+0x40/0xb8
[   20.935938]  acpi_cppc_processor_probe+0x4e8/0xb08
[   20.940717]  __acpi_processor_start+0x48/0xb0
[   20.945062]  acpi_processor_start+0x40/0x60
[   20.949235]  really_probe+0x118/0x548
[   20.952887]  driver_probe_device+0x7c/0x148
[   20.957059]  device_driver_attach+0x94/0xa0
[   20.961231]  __driver_attach+0xa4/0x110
[   20.965055]  bus_for_each_dev+0xe8/0x158
[   20.968966]  driver_attach+0x30/0x40
[   20.972531]  bus_add_driver+0x234/0x2f0
[   20.976356]  driver_register+0xbc/0x1d0
[   20.980182]  acpi_processor_driver_init+0x40/0xe4
[   20.984875]  do_one_initcall+0xb4/0x254
[   20.988700]  kernel_init_freeable+0x24c/0x2f8
[   20.993047]  kernel_init+0x10/0x118
[   20.996524]  ret_from_fork+0x10/0x18
[   21.000087]
[   21.001567] Allocated by task 1:
[   21.004785]  save_stack+0x28/0xc8
[   21.008089]  __kasan_kmalloc.isra.9+0xbc/0xd8
[   21.012435]  kasan_kmalloc+0xc/0x18
[   21.015913]  pcc_data_alloc+0x94/0xb8
[   21.019564]  acpi_cppc_processor_probe+0x4e8/0xb08
[   21.024343]  __acpi_processor_start+0x48/0xb0
[   21.028689]  acpi_processor_start+0x40/0x60
[   21.032860]  really_probe+0x118/0x548
[   21.036512]  driver_probe_device+0x7c/0x148
[   21.040684]  device_driver_attach+0x94/0xa0
[   21.044855]  __driver_attach+0xa4/0x110
[   21.048680]  bus_for_each_dev+0xe8/0x158
[   21.052591]  driver_attach+0x30/0x40
[   21.056155]  bus_add_driver+0x234/0x2f0
[   21.059980]  driver_register+0xbc/0x1d0
[   21.063805]  acpi_processor_driver_init+0x40/0xe4
[   21.068497]  do_one_initcall+0xb4/0x254
[   21.072322]  kernel_init_freeable+0x24c/0x2f8
[   21.076667]  kernel_init+0x10/0x118
[   21.080144]  ret_from_fork+0x10/0x18
[   21.083707]
[   21.085186] Freed by task 1:
[   21.088056]  save_stack+0x28/0xc8
[   21.091360]  __kasan_slab_free+0x118/0x180
[   21.095445]  kasan_slab_free+0x10/0x18
[   21.099183]  kfree+0x80/0x268
[   21.102139]  acpi_cppc_processor_exit+0x1a8/0x1b8
[   21.106832]  acpi_processor_stop+0x70/0x80
[   21.110917]  really_probe+0x174/0x548
[   21.114568]  driver_probe_device+0x7c/0x148
[   21.118740]  device_driver_attach+0x94/0xa0
[   21.122912]  __driver_attach+0xa4/0x110
[   21.126736]  bus_for_each_dev+0xe8/0x158
[   21.130648]  driver_attach+0x30/0x40
[   21.134212]  bus_add_driver+0x234/0x2f0
[   21.0x10/0x18
[   21.161764]
[   21.163244] The buggy address belongs to the object at ffff00236cdeb600
[   21.163244]  which belongs to the cache kmalloc-256 of size 256
[   21.175750] The buggy address is located 132 bytes inside of
[   21.175750]  256-byte region [ffff00236cdeb600ffff00236cdeb700)
[   21.187473] The buggy address belongs to the page:
[   21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0
[   21.202331] flags: 0x1ffff00000010200(slab|head)
[   21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00
[   21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000
[   21.222400] page dumped because: kasan: bad access detected
[   21.227959]
[   21.229438] Memory state around the buggy address:
[   21.234218]  ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   21.241427]  ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   21.255845]                    ^
[   21.259062]  ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   21.266272]  ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   21.273480] ==================================================================

It seems that global pcc_data[pcc_ss_id] can be freed in
acpi_cppc_processor_exit(), but we may later reference this value, so
NULLify it when freed.

Also remove the useless setting of data "pcc_channel_acquired", which
we're about to free.

Fixes: 85b1407bf6d2 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs")
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
5 years agoMerge branches 'pm-cpufreq' and 'pm-sleep'
Rafael J. Wysocki [Fri, 18 Oct 2019 08:27:55 +0000 (10:27 +0200)]
Merge branches 'pm-cpufreq' and 'pm-sleep'

* pm-cpufreq:
  ACPI: processor: Avoid NULL pointer dereferences at init time
  cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown

* pm-sleep:
  PM: sleep: include <linux/pm_runtime.h> for pm_wq
  ACPI: PM: Drop Dell XPS13 9360 from LPS0 Idle _DSM blacklist

5 years agonet: Update address for MediaTek ethernet driver in MAINTAINERS
Sean Wang [Wed, 16 Oct 2019 21:14:08 +0000 (05:14 +0800)]
net: Update address for MediaTek ethernet driver in MAINTAINERS

Update maintainers for MediaTek ethernet driver with Mark Lee.
He is familiar with MediaTek mt762x series ethernet devices and
will keep following maintenance from the vendor side.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>