Andy Shevchenko [Tue, 26 Jul 2022 09:14:48 +0000 (12:14 +0300)]
gpio: 74xx-mmio: Use bits instead of plain numbers for flags
The initial code was misleading to use bitwise AND against plain number,
and the commit d3054ba1db62 ("gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag
in mmio_74xx_dir_in()") missed that. Switch definitions to be defined bits
for the correct comparison.
Fixes: d3054ba1db62 ("gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in()") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
gpio: gpio-mm: Implement and utilize register structures
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The GPIO-MM device features an
Intel 8255 compatible GPIO interface, so the i8255 GPIO module is
selected and utilized as well.
Tested-by: Fred Eckert <Frede@cmslaser.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
gpio: 104-idi-48: Implement and utilize register structures
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The 104-IDI-48 device features
an Intel 8255 compatible GPIO interface, so the i8255 GPIO module is
selected and utilized as well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: John Hentges <jhentges@accesio.com> Cc: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
gpio: 104-dio-48e: Implement and utilize register structures
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The 104-DIO-48E device
features an Intel 8255 compatible GPIO interface, so the i8255 GPIO
module is selected and utilized as well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: John Hentges <jhentges@accesio.com> Cc: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
gpio: i8255: Introduce the Intel 8255 interface library module
Exposes consumer library functions providing support for interfaces
compatible with the venerable Intel 8255 Programmable Peripheral
Interface (PPI).
The Intel 8255 PPI first appeared in the early 1970s, initially for the
Intel 8080 and later appearing in the original IBM-PC. The popularity of
the original Intel 8255 chip led to many subsequent variants and clones
of the interface in various chips and integrated circuits. Although
still popular, interfaces compatible with the Intel 8255 PPI are
nowdays typically found embedded in larger VLSI processing chips and
FPGA components rather than as discrete ICs.
A CONFIG_GPIO_I8255 Kconfig option is introduced by this patch. Modules
wanting access to these i8255 library functions should select this
Kconfig option, and import the I8255 symbol namespace.
Tested-by: Fred Eckert <Frede@cmslaser.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: John Hentges <jhentges@accesio.com> Cc: Jay Dolan <jay.dolan@accesio.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
gpio: 104-idio-16: Implement and utilize register structures
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures.
Tested-by: Fred Eckert <Frede@cmslaser.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: John Hentges <jhentges@accesio.com> Cc: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Nuno Sá [Wed, 13 Jul 2022 13:14:20 +0000 (15:14 +0200)]
gpiolib: acpi: support bias pull disable
On top of looking at PULL_UP and PULL_DOWN flags, also look at
PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then
pass down this to controllers that support it.
Signed-off-by: Nuno Sá <nuno.sa@analog.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Nuno Sá [Wed, 13 Jul 2022 13:14:19 +0000 (15:14 +0200)]
gpiolib: of: support bias pull disable
On top of looking at PULL_UP and PULL_DOWN flags, also look at
PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then
pass down this to controllers that support it.
Nuno Sá [Wed, 13 Jul 2022 13:14:18 +0000 (15:14 +0200)]
gpiolib: add support for bias pull disable
This change prepares the gpio core to look at firmware flags and set
'FLAG_BIAS_DISABLE' if necessary. It works in similar way to
'GPIO_PULL_DOWN' and 'GPIO_PULL_UP'.
Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Combine the polarity_change flag, struct line eflags, and hte enable
flag into a single flag variable.
The combination of these flags describes the configuration state
of the edge detector, so formalize and clarify that by combining
them into a single variable, edflags, in struct line.
The edflags is a subset of the GPIO_V2_LINE_FLAGsb relevant to
the edge detector, and is also a superset of the eflags it replaces.
The eflags name is still used to describe the subset of edflags
corresponding to the rising/falling edge flags where edflags is
masked down to that subset.
This consolidation reduces the number of variables being passed,
simplifies state comparisons, and provides a more extensible
foundation should additional edge sources be integrated in the
future.
Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Kent Gibson [Thu, 14 Jul 2022 02:03:14 +0000 (10:03 +0800)]
gpiolib: cdev: simplify linereq_free
The edge detector is only ever started after the line desc has been
determined, so move edge_detector_stop() inside the line desc check,
and merge the two checked regions into one.
Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Dipen Patel <dipenp@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
gpio: GPIO_SAMA5D2_PIOBU should depend on ARCH_AT91
The SAMA5D2 PIOBU is only present on some AT91/Microchip SoCs. Hence
add a dependency on ARCH_AT91, to prevent asking the user about this
driver when configuring a kernel without AT91/Microchip SoC support.
Liang He [Mon, 11 Jul 2022 12:52:38 +0000 (20:52 +0800)]
gpio: gpiolib-of: Fix refcount bugs in of_mm_gpiochip_add_data()
We should use of_node_get() when a new reference of device_node
is created. It is noted that the old reference stored in
'mm_gc->gc.of_node' should also be decreased.
This patch is based on the fact that there is a call site in function
'qe_add_gpiochips()' of src file 'drivers\soc\fsl\qe\gpio.c'. In this
function, of_mm_gpiochip_add_data() is contained in an iteration of
for_each_compatible_node() which will automatically increase and
decrease the refcount. So we need additional of_node_get() for the
reference escape in of_mm_gpiochip_add_data().
Fixes: a19e3da5bc5f ("of/gpio: Kill of_gpio_chip and add members directly to gpio_chip") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Andy Shevchenko [Tue, 28 Jun 2022 19:39:04 +0000 (22:39 +0300)]
gpio: adp5588: Do not use defined value for driver name and compatible
It's wrong to use defined string literal for three semantically different
cases, i.e.:
1) compatible string, which is part of ABI and has to have specific format;
2) I2C ID, which is user space visible and also ABI;
3) driver name, that can be changed.
Drop the define and use appropriate string literals in place.
While at it, drop comma at terminator entry of OF ID table.
Allow usage of gpio-ranges with the rockchip gpio controller. The driver
already had support for this since it has been added to the mainline kernel
in the first place.
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Andy Shevchenko [Tue, 28 Jun 2022 19:59:12 +0000 (22:59 +0300)]
gpio: adnp: use simple i2c probe function
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Uwe Kleine-König [Wed, 15 Jun 2022 12:47:18 +0000 (14:47 +0200)]
gpio: xgs-iproc: Drop if with an always false condition
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so chip is never NULL.
Also note that returning an error code from a remove callback doesn't
result in the device staying bound. It's still removed and devm
callbacks are called.
This is a preparation for making platform remove callbacks return void.
Uwe Kleine-König [Tue, 14 Jun 2022 15:23:39 +0000 (17:23 +0200)]
gpio: twl4030: Don't return an error after WARN in .remove
Returning a non-zero value in a platform driver's remove callback only
results in an error message ("remove callback returned a non-zero value.
This will be ignored.", see platform_remove()), and then the device is
removed anyhow.
As there was just a WARN_ON triggered, return 0 to drop the follow up
warning. The latter output is hardly relevant after the big WARN splat.
This is a preparation for making platform remove callbacks return void.
Devarsh Thakkar [Mon, 13 Jun 2022 05:43:10 +0000 (11:13 +0530)]
gpio: davinci: Add support for system suspend/resume PM
Add support for system suspend/resume PM hooks, save the
register context of all the required gpio registers on suspend
and restore context on the resume.
Chris Packham [Thu, 26 May 2022 01:29:46 +0000 (13:29 +1200)]
dt-bindings: gpio: gpio-mvebu: document offset and marvell,pwm-offset
The offset and marvell,pwm-offset properties weren't in the old binding.
Add them based on the existing usage in the driver and board DTS when
the marvell,armada-8k-gpio compatible is used.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Commit 5f79c651e81e ("arm: mvebu: use global interrupts for GPIOs on
Armada XP") the marvell,armadaxp-gpio compatible obsolete.
The driver code still exists to handle the armadaxp behaviour but all
the in-tree boards use the marvell,armada-370-gpio. Document the
marvell,armadaxp-gpio compatible as deprecated.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Chris Packham [Thu, 26 May 2022 01:29:44 +0000 (13:29 +1200)]
dt-bindings: gpio: gpio-mvebu: convert txt binding to DT schema format
Convert the existing device tree binding to DT schema format.
The old binding listed the interrupt-controller and related properties
as required but there are sufficiently many existing usages without it
that the YAML binding does not make the interrupt properties required.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Andy Shevchenko [Wed, 22 Jun 2022 17:28:42 +0000 (20:28 +0300)]
gpiolib: devres: Get rid of unused devm_gpio_free()
The last user, which in fact was a dead code, has gone a year ago,
previous one 3 years ago. On top of that we want to drop away the
legacy GPIO APIs in the kernel, so take a chance to get rid of
unused devm_gpio_free() and accompanying stuff.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Merge tag 'perf-tools-fixes-for-v5.19-2022-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix SIGSEGV when processing syscall args in perf.data files in 'perf
trace'
- Sync kvm, msr-index and cpufeatures headers with the kernel sources
- Fix 'convert perf time to TSC' 'perf test':
- No need to open events twice
- Fix finding correct event on hybrid systems
* tag 'perf-tools-fixes-for-v5.19-2022-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf trace: Fix SIGSEGV when processing syscall args
perf tests: Fix Convert perf time to TSC test for hybrid
perf tests: Stop Convert perf time to TSC test opening events twice
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
Matthew Auld [Tue, 12 Jul 2022 17:40:50 +0000 (18:40 +0100)]
drm/i915/ttm: fix 32b build
Since segment_pages is no longer a compile time constant, it looks the
DIV_ROUND_UP(node->size, segment_pages) breaks the 32b build. Simplest
is just to use the ULL variant, but really we should need not need more
than u32 for the page alignment (also we are limited by that due to the
sg->length type), so also make it all u32.
Merge tag 'perf_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- A single data race fix on the perf event cleanup path to avoid
endless loops due to insufficient locking
* tag 'perf_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()
Merge tag 'x86_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Improve the check whether the kernel supports WP mappings so that it
can accomodate a XenPV guest due to how the latter is setting up the
PAT machinery
- Now that the retbleed nightmare is public, here's the first round of
fallout fixes:
* Fix a build failure on 32-bit due to missing include
* Remove an untraining point in espfix64 return path
* other small cleanups
* tag 'x86_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove apostrophe typo
um: Add missing apply_returns()
x86/entry: Remove UNTRAIN_RET from native_irq_return_ldt
x86/bugs: Mark retbleed_strings static
x86/pat: Fix x86_has_pat_wp()
x86/asm/32: Fix ANNOTATE_UNRET_SAFE use on 32-bit
Merge tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- fix Goodix driver to properly behave on the Aya Neo Next
- some more sanity checks in usbtouchscreen driver
- a tweak in wm97xx driver in preparation for remove() to return void
- a clarification in input core regarding units of measurement for
resolution on touch events.
* tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: document the units for resolution of size axes
Input: goodix - call acpi_device_fix_up_power() in some cases
Input: wm97xx - make .remove() obviously always return 0
Input: usbtouchscreen - add driver_info sanity check
perf trace: Fix SIGSEGV when processing syscall args
On powerpc, 'perf trace' is crashing with a SIGSEGV when trying to
process a perf.data file created with 'perf trace record -p':
#0 0x00000001225b8988 in syscall_arg__scnprintf_augmented_string <snip> at builtin-trace.c:1492
#1 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1492
#2 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1486
#3 0x00000001225bdd9c in syscall_arg_fmt__scnprintf_val <snip> at builtin-trace.c:1973
#4 syscall__scnprintf_args <snip> at builtin-trace.c:2041
#5 0x00000001225bff04 in trace__sys_enter <snip> at builtin-trace.c:2319
That points to the below code in tools/perf/builtin-trace.c:
/*
* If this is raw_syscalls.sys_enter, then it always comes with the 6 possible
* arguments, even if the syscall being handled, say "openat", uses only 4 arguments
* this breaks syscall__augmented_args() check for augmented args, as we calculate
* syscall->args_size using each syscalls:sys_enter_NAME tracefs format file,
* so when handling, say the openat syscall, we end up getting 6 args for the
* raw_syscalls:sys_enter event, when we expected just 4, we end up mistakenly
* thinking that the extra 2 u64 args are the augmented filename, so just check
* here and avoid using augmented syscalls when the evsel is the raw_syscalls one.
*/
if (evsel != trace->syscalls.events.sys_enter)
augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size, trace->raw_augmented_syscalls_args_size);
As the comment points out, we should not be trying to augment the args
for raw_syscalls. However, when processing a perf.data file, we are not
initializing those properly. Fix the same.
Reported-by: Claudio Carvalho <cclaudio@linux.ibm.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220707090900.572584-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 13 Jul 2022 12:34:59 +0000 (15:34 +0300)]
perf tests: Fix Convert perf time to TSC test for hybrid
The test does not always correctly determine the number of events for
hybrids, nor allow for more than 1 evsel when parsing.
Fix by iterating the events actually created and getting the correct
evsel for the events processed.
Fixes: d9da6f70eb235110 ("perf tests: Support 'Convert perf time to TSC' test for hybrid") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220713123459.24145-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 13 Jul 2022 12:34:58 +0000 (15:34 +0300)]
perf tests: Stop Convert perf time to TSC test opening events twice
Do not call evlist__open() twice.
Fixes: 5bb017d4b97a0f13 ("perf test: Fix error message for test case 71 on s390, where it is not supported") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220713123459.24145-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/YtQTm9wsB3hxQWvy@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org Link: https://lore.kernel.org/lkml/YtQM40VmiLTkPND2@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
1b870fa5573e260b ("kvm: stats: tell userspace which values are boolean")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/YtQLDvQrBhJNl3n5@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'for-5.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs reverts from David Sterba:
"Due to a recent report [1] we need to revert the radix tree to xarray
conversion patches.
There's a problem with sleeping under spinlock, when xa_insert could
allocate memory under pressure. We use GFP_NOFS so this is a real
problem that we unfortunately did not discover during review.
I'm sorry to do such change at rc6 time but the revert is IMO the
safer option, there are patches to use mutex instead of the spin locks
but that would need more testing. The revert branch has been tested on
a few setups, all seem ok.
The conversion to xarray will be revisited in the future"
Link: https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/
* tag 'for-5.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: turn delayed_nodes_tree into an XArray"
Revert "btrfs: turn name_cache radix tree into XArray in send_ctx"
Revert "btrfs: turn fs_info member buffer_radix into XArray"
Revert "btrfs: turn fs_roots_radix in btrfs_fs_info into an XArray"
Merge tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver fixes from Greg KH:
"Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a
number of reported problems including:
- longtime bug in pty_write() that has been reported in the past.
- 8250 driver fixes
- new serial device ids
- vt overlapping data copy bugfix
- other tiny serial driver bugfixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
vt: fix memory overlapping when deleting chars in the buffer
serial: mvebu-uart: correctly report configured baudrate value
serial: 8250: Fix PM usage_count for console handover
serial: 8250: fix return error code in serial8250_request_std_resource()
serial: stm32: Clear prev values before setting RTS delays
tty: Add N_CAN327 line discipline ID for ELM327 based CAN driver
serial: 8250: Fix __stop_tx() & DMA Tx restart races
serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
tty: serial: samsung_tty: set dma burst_size to 1
serial: 8250: dw: enable using pdata with ACPI
Merge tag 's390-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix building of out-of-tree kernel modules without a pre-built kernel
in case CONFIG_EXPOLINE_EXTERN=y.
- Fix a reference counting error that could prevent unloading of zcrypt
modules.
* tag 's390-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: fix error handling in __verify_queue_reservations()
s390/nospec: remove unneeded header includes
s390/nospec: build expoline.o for modules_prepare target
Merge tag 'pm-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki
"Fix recent regression in the cpufreq mediatek driver related to
incorrect handling of regulator_get_optional() return value
(AngeloGioacchino Del Regno)"
* tag 'pm-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: mediatek: Handle sram regulator probe deferral
Merge tag 'acpi-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix more fallout from recent changes of the ACPI CPPC handling on AMD
platforms (Mario Limonciello)"
* tag 'acpi-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory
random: cap jitter samples per bit to factor of HZ
Currently the jitter mechanism will require two timer ticks per
iteration, and it requires N iterations per bit. This N is determined
with a small measurement, and if it's too big, it won't waste time with
jitter entropy because it'd take too long or not have sufficient entropy
anyway.
With the current max N of 32, there are large timeouts on systems with a
small CONFIG_HZ. Rather than set that maximum to 32, instead choose a
factor of CONFIG_HZ. In this case, 1/30 seems to yield sane values for
different configurations of CONFIG_HZ.
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Fixes: 78c768e619fb ("random: vary jitter iterations based on cycle counter speed") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'riscv-for-linus-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid printing a warning when modules do not exercise any
errata-dependent behavior and the SiFive errata are enabled.
- A fix to the Microchip PFSOC to attach the L2 cache to the CPU nodes.
* tag 'riscv-for-linus-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: don't warn for sifive erratas in modules
riscv: dts: microchip: hook up the mpfs' l2cache
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"RISC-V:
- Fix missing PAGE_PFN_MASK
- Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
x86:
- Fix for nested virtualization when TSC scaling is active
- Estimate the size of fastcc subroutines conservatively, avoiding
disastrous underestimation when return thunks are enabled
- Avoid possible use of uninitialized fields of 'struct
kvm_lapic_irq'
Generic:
- Mark as such the boolean values available from the statistics file
descriptors
- Clarify statistics documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: emulate: do not adjust size of fastop and setcc subroutines
KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()
Documentation: kvm: clarify histogram units
kvm: stats: tell userspace which values are boolean
x86/kvm: fix FASTOP_SIZE when return thunks are enabled
KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1
RISC-V: KVM: Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
riscv: Fix missing PAGE_PFN_MASK
Merge tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A folio locking fixup that Xiubo and David cooperated on, marked for
stable. Most of it is in netfs but I picked it up into ceph tree on
agreement with David"
* tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client:
netfs: do not unlock and put the folio twice
Merge tag 'spi-fix-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes, none especially remarkable, plus a
MAINTAINERS file update due to the previous maintainer for the NXP
FSPI driver having left the company"
* tag 'spi-fix-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Remove spi_master_put() in probe failure path
MAINTAINERS: change the NXP FSPI driver maintainer.
spi: amd: Limit max transfer and message size
spi: aspeed: Fix division by zero
spi: aspeed: Add dev_dbg() to dump the spi-mem direct mapping descriptor
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
Merge tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- Fix brightness key events getting reported twice on some Dells.
Regression caused by recent Panasonic hotkey fixes
- Fix poweroff no longer working on some devices regression caused
by recent poweroff handler rework
- Mark new (in 5.19) Intel IFS driver as broken, because of some
issues surrounding the userspace (sysfs) API which need to be
cleared up
- Some hardware-id / quirk additions"
* tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
ACPI: video: Fix acpi_video_handles_brightness_key_presses()
platform/x86: intel_atomisp2_led: Also turn off the always-on camera LED on the Asus T100TAF
platform/x86/intel/ifs: Mark as BROKEN
platform/x86: asus-wmi: Add key mappings
efi: Fix efi_power_off() not being run before acpi_power_off() when necessary
platform/x86: x86-android-tablets: Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
platform/x86: gigabyte-wmi: add support for B660I AORUS PRO DDR4
platform/x86/amd/pmc: Add new platform support
platform/x86/amd/pmc: Add new acpi id for PMC controller
Merge tag 'drm-fixes-2022-07-15' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the regular fixes pull for this week. This has a bunch of
amdgpu fixes, major one reverts the buddy allocator until it can be
tested more, otherwise just small ones, then i915 has a bunch of
fixes.
The outstanding firmware regressions reported by phoronix will
hopefully be dealt with ASAP.
amdgpu:
- revert buddy allocator support for now
- DP MST blank screen fix for specific platforms
- MEC firmware check fix for GC 10.3.7
- Deep color fix for DCE
- Fix possible divide by 0
- Coverage blend mode fix
- Fix cursor only commit timestamps
i915:
- Selftest fix
- TTM fix sg_table construction
- Error return fixes
- Fix a performance regression related to waitboost
- Fix GT resets"
* tag 'drm-fixes-2022-07-15' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Ensure valid event timestamp for cursor-only commits
drm/amd/display: correct check of coverage blend mode
drm/amd/pm: Prevent divide by zero
drm/amd/display: Only use depth 36 bpp linebuffers on DCN display engines.
drm/amdkfd: correct the MEC atomic support firmware checking for GC 10.3.7
drm/amd/display: Ignore First MST Sideband Message Return Error
drm/i915/selftests: fix subtraction overflow bug
drm/i915/gem: Look for waitboosting across the whole object prior to individual waits
drm/i915/gt: Serialize TLB invalidates with GT resets
drm/i915/gt: Serialize GRDOM access between multiple engine resets
drm/i915/ttm: fix sg_table construction
drm/i915/selftests: fix a couple IS_ERR() vs NULL tests
drm/i915: Fix vm use-after-free in vma destruction
drm/i915/guc: ADL-N should use the same GuC FW as ADL-S
drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()
drm/i915/gvt: IS_ERR() vs NULL bug in intel_gvt_update_reg_whitelist()
Revert "drm/amdgpu: add drm buddy support to amdgpu"
Merge tag 'sysctl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pyll sysctl fix from Luis Chamberlain:
"Only one fix for sysctl"
* tag 'sysctl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE
Paolo Bonzini [Fri, 15 Jul 2022 11:34:55 +0000 (07:34 -0400)]
KVM: emulate: do not adjust size of fastop and setcc subroutines
Instead of doing complicated calculations to find the size of the subroutines
(which are even more complicated because they need to be stringified into
an asm statement), just hardcode to 16.
It is less dense for a few combinations of IBT/SLS/retbleed, but it has
the advantage of being really simple.
Cc: stable@vger.kernel.org # 5.15.x: 84e7051c0bc1: x86/kvm: fix FASTOP_SIZE when return thunks are enabled Cc: stable@vger.kernel.org Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
John Ogness [Fri, 15 Jul 2022 06:10:42 +0000 (08:16 +0206)]
printk: do not wait for consoles when suspended
The console_stop() and console_start() functions call pr_flush().
When suspending, these functions are called by the serial subsystem
while the serial port is suspended. In this scenario, if there are
any pending messages, a call to pr_flush() will always result in a
timeout because the serial port cannot make forward progress. This
causes longer suspend and resume times.
Add a check in pr_flush() so that it will immediately timeout if
the consoles are suspended.
Tony Krowiak [Wed, 6 Jul 2022 21:43:29 +0000 (17:43 -0400)]
s390/ap: fix error handling in __verify_queue_reservations()
The AP bus's __verify_queue_reservations function increments the ref count
for the device driver passed in as a parameter, but fails to decrement it
before returning control to the caller. This will prevents any subsequent
removal of the module.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reported-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Fixes: 4f8206b88286 ("s390/ap: driver callback to indicate resource in use") Link: https://lore.kernel.org/r/20220706222619.602094-1-akrowiak@linux.ibm.com Cc: stable@vger.kernel.org
[agordeev@linux.ibm.com fixed description, added Fixes and Link] Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Dave Airlie [Fri, 15 Jul 2022 01:26:20 +0000 (11:26 +1000)]
Merge tag 'amd-drm-fixes-5.19-2022-07-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.19-2022-07-13:
amdgpu:
- DP MST blank screen fix for specific platforms
- MEC firmware check fix for GC 10.3.7
- Deep color fix for DCE
- Fix possible divide by 0
- Coverage blend mode fix
- Fix cursor only commit timestamps
Nick Desaulniers [Thu, 14 Jul 2022 20:56:43 +0000 (13:56 -0700)]
ubsan: disable UBSAN_DIV_ZERO for clang
Building with UBSAN_DIV_ZERO with clang produces numerous fallthrough
warnings from objtool.
In the case of uncheck division, UBSAN_DIV_ZERO may introduce new
control flow to check for division by zero.
Because the result of the division is undefined, LLVM may optimize the
control flow such that after the call to __ubsan_handle_divrem_overflow
doesn't matter. If panic_on_warn was set,
__ubsan_handle_divrem_overflow would panic.
The problem is is that panic_on_warn is run time configurable. If it's
disabled, then we cannot guarantee that we will be able to recover
safely. Disable this config for clang until we can come up with a
solution in LLVM.
Dave Chinner reports:
"As I suspected would occur, this change causes test failures. e.g
generic/517 in fstests fails with:
generic/517 1s ... - output mismatch [..]
-deduped 131172/131172 bytes at offset 65536
+deduped 131072/131172 bytes at offset 65536"
can you please revert this commit for the 5.19 series to give us more
time to investigate and consider the impact of the the API change on
userspace applications before we commit to changing the API"
That changed return value seems to reflect reality, but with the fstest
change, let's revert for now.