After ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is
set to down/up") to not reset from usbnet_open after the reset from
usbnet_probe at initialization stage to speed up this, some issues have
been reported.
It seems to happen that if the initialization is slower, and some time
passes between the probe operation and the open operation, the second reset
from open is necessary too to have the device working. The reason is that
if there is no activity with the phy, this is "disconnected".
In order to improve this, the solution is to detect when the phy is
"disconnected", and we can use the phy status register for this. So we will
only reset the device from reset operation in this situation, that is, only
if necessary.
The same bahavior is happening when the device is stopped (link set to
down) and later is restarted (link set to up), so if the phy keeps working
we only need to enable the mac again, but if enough time passes between the
device stop and restart, reset is necessary, and we can detect the
situation checking the phy status register too.
cc: stable@vger.kernel.org # 6.6+ Fixes: ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is set to down/up") Reported-by: Yongqin Liu <yongqin.liu@linaro.org> Reported-by: Antje Miederhöfer <a.miederhoefer@gmx.de> Reported-by: Arne Fitzenreiter <arne_f@ipfire.org> Tested-by: Yongqin Liu <yongqin.liu@linaro.org> Tested-by: Antje Miederhöfer <a.miederhoefer@gmx.de> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Assign the configured channel value to the EXTTS event in the timestamp
interrupt handler. Without assigning the correct channel, applications
like ts2phc will refuse to accept the event, resulting in errors such
as:
...
ts2phc[656.834]: config item end1.ts2phc.pin_index is 0
ts2phc[656.834]: config item end1.ts2phc.channel is 3
ts2phc[656.834]: config item end1.ts2phc.extts_polarity is 2
ts2phc[656.834]: config item end1.ts2phc.extts_correction is 0
...
ts2phc[656.862]: extts on unexpected channel
ts2phc[658.141]: extts on unexpected channel
ts2phc[659.140]: extts on unexpected channel
Fixes: f4da56529da60 ("net: stmmac: Add support for external trigger timestamping") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/20240618073821.619751-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
// Set s_mb_group_prealloc to 2147483647 via sysfs
ext4_mb_new_blocks
ext4_mb_normalize_request
ext4_mb_normalize_group_request
ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc
ext4_mb_regular_allocator
ext4_mb_choose_next_group
ext4_mb_choose_next_group_best_avail
mb_avg_fragment_size_order
order = fls(len) - 2 = 29
ext4_mb_find_good_group_avg_frag_lists
frag_list = &sbi->s_mb_avg_fragment_size[order]
if (list_empty(frag_list)) // Trigger SOOB!
At 4k block size, the length of the s_mb_avg_fragment_size list is 14,
but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds
to be triggered by an attempt to access an element at index 29.
Add a new attr_id attr_clusters_in_group with values in the range
[0, sbi->s_clusters_per_group] and declare mb_group_prealloc as
that type to fix the issue. In addition avoid returning an order
from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb)
and reduce some useless loops.
Fixes: 7e170922f06b ("ext4: Add allocation criteria 1.5 (CR1_5)") CC: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Link: https://lore.kernel.org/r/20240319113325.3110393-5-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When setting values of type unsigned int through sysfs, we use kstrtoul()
to parse it and then truncate part of it as the final set value, when the
set value is greater than UINT_MAX, the set value will not match what we
see because of the truncation. As follows:
So we use kstrtouint() to parse the attr_pointer_ui type to avoid the
inconsistency described above. In addition, a judgment is added to avoid
setting s_resv_clusters less than 0.
Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240319113325.3110393-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
After starting to install the EC address space handler at the ACPI
namespace root, if there is an "orphan" _REG method in the EC device's
scope, it will not be evaluated any more. This breaks EC operation
regions on some systems, like Asus gu605.
To address this, use a wrapper around an existing ACPICA function to
look for an "orphan" _REG method in the EC device scope and evaluate
it if present.
Fixes: 60fa6ae6e6d0 ("ACPI: EC: Install address space handler at the namespace root") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218945 Reported-by: VitaliiT <vitaly.torshyn@gmail.com> Tested-by: VitaliiT <vitaly.torshyn@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Ignore optional ib_access_flags when an MR is created.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter") Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com> Link: https://lore.kernel.org/r/1717575368-14879-1-git-send-email-kotaranov@linux.microsoft.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
max_sge attribute is passed by the user, and is inserted and used
unchecked, so verify that the value doesn't exceed maximum allowed value
before using it.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Link: https://lore.kernel.org/r/277ccc29e8d57bfd53ddeb2ac633f2760cf8cdd0.1716900410.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Currently we return the value from invoke_psci_fn() directly as return
value from psci_system_suspend(). It is wrong to send the PSCI interface
return value directly. psci_to_linux_errno() provide the mapping from
PSCI return value to the one that can be returned to the callers within
the kernel.
Use psci_to_linux_errno() to convert and return the correct value from
psci_system_suspend().
Fixes: faf7ec4a92c0 ("drivers: firmware: psci: add system suspend support") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20240515095528.1949992-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In io_import_fixed when advancing the iter within the first bvec, the
iter->nr_segs is set to bvec->bv_len. nr_segs should be the number of
bvecs, plus we don't need to adjust it here, so just remove it.
Fixes: b000ae0ec2d7 ("io_uring/rsrc: optimise single entry advance") Signed-off-by: Chenliang Li <cliang01.li@samsung.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20240619063819.2445-1-cliang01.li@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The patch 15a6af94a277 ("spi: Increase imx51 ecspi burst length based
on transfer length") increased the burst length calculation in
mx51_ecspi_prepare_transfer() to be based on the transfer length.
This breaks HW CS + SPI_CS_WORD support which was added in 6e95b23a5b2d ("spi: imx: Implement support for CS_WORD") and transfers
with bits-per-word != 8, 16, 32.
SPI_CS_WORD means the CS should be toggled after each word. The
implementation in the imx-spi driver relies on the fact that the HW CS
is toggled automatically by the controller after each burst length
number of bits. Setting the burst length to the number of bits of the
_whole_ message breaks this use case.
Further the patch 15a6af94a277 ("spi: Increase imx51 ecspi burst
length based on transfer length") claims to optimize the transfers.
But even without this patch, on modern spi-imx controllers with
"dynamic_burst = true" (imx51, imx6 and newer), the transfers are
already optimized, i.e. the burst length is dynamically adjusted in
spi_imx_push() to avoid the pause between the SPI bursts. This has
been confirmed by a scope measurement on an imx6d.
Subsequent Patches tried to fix these and other problems:
- 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits")
- e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma")
- c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
- cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
but the HW CS + SPI_CS_WORD use case is still broken.
To fix the problems revert the burst size calculation in
mx51_ecspi_prepare_transfer() back to the original form, before 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on
transfer length") was applied.
Cc: Stefan Moring <stefan.moring@technolution.nl> Cc: Stefan Bigler <linux@bigler.io> Cc: Clark Wang <xiaoning.wang@nxp.com> Cc: Carlos Song <carlos.song@nxp.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Thorsten Scherer <T.Scherer@eckelmann.de> Fixes: 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length") Fixes: 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits") Fixes: e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma") Fixes: c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode") Fixes: cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length") Link: https://lore.kernel.org/all/20240618-oxpecker-of-ideal-mastery-db59f8-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Thorsten Scherer <t.scherer@eckelmann.de> Link: https://msgid.link/r/20240618-spi-imx-fix-bustlength-v1-1-2053dd5fdf87@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Undo the modifications made in commit d410ee5109a1 ("ACPICA: avoid
"Info: mapping multiple BARs. Your kernel is fine.""). The initial
purpose of this commit was to stop memory mappings for operation
regions from overlapping page boundaries, as it can trigger warnings
if different page attributes are present.
However, it was found that when this situation arises, mapping
continues until the boundary's end, but there is still an attempt to
read/write the entire length of the map, leading to a NULL pointer
deference. For example, if a four-byte mapping request is made but
only one byte is mapped because it hits the current page boundary's
end, a four-byte read/write attempt is still made, resulting in a NULL
pointer deference.
Instead, map the entire length, as the ACPI specification does not
mandate that it must be within the same page boundary. It is
permissible for it to be mapped across different regions.
Link: https://github.com/acpica/acpica/pull/954 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218849 Fixes: d410ee5109a1 ("ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine."") Co-developed-by: Sanath S <Sanath.S@amd.com> Signed-off-by: Sanath S <Sanath.S@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The usdhc2 port is connected to the microSD slot. The presence of the
'no-sdio' property prevents Wifi SDIO cards, such as CMP9010-X-EVB [1]
to be detected.
Remove the 'no-sdio' property so that SDIO cards could also work.
The IMX8MP_CLK_CLKOUT2 supplies the TC9595 bridge with 13 MHz reference
clock. The IMX8MP_CLK_CLKOUT2 is supplied from IMX8MP_AUDIO_PLL2_OUT.
The IMX8MP_CLK_CLKOUT2 operates only as a power-of-two divider, and the
current 156 MHz is not power-of-two divisible to achieve 13 MHz.
To achieve 13 MHz output from IMX8MP_CLK_CLKOUT2, set IMX8MP_AUDIO_PLL2_OUT
to 208 MHz, because 208 MHz / 16 = 13 MHz.
Fixes: 20d0b83e712b ("arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This patch prevents from registering thermal entries and letting the
driver misbehave if efuse data is invalid. A device is not properly
calibrated if the golden temperature is zero.
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") Signed-off-by: Julien Panis <jpanis@baylibre.com> Reviewed-by: Nicolas Pitre <npitre@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240604-mtk-thermal-calib-check-v2-1-8f258254051d@baylibre.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Ramp values are inverted. This caused wrong values written to register
when ramp values were defined in device tree.
Invert values in table to fix this.
Signed-off-by: Kalle Niemi <kaleposti@gmail.com> Fixes: 1aad39001e85 ("regulator: Support ROHM BD71815 regulators") Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/ZmmJXtuVJU6RgQAH@latitude5580 Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Kbuild does not support having a source file compiled multiple times
and linked into distinct modules, or built-in and modular at the
same time. For fs-edma, there are two common components that are
linked into the fsl-edma.ko for Arm and PowerPC, plus the mcf-edma.ko
module on Coldfire. This violates the rule for compile-testing:
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-common.o is added to multiple modules: fsl-edma mcf-edma
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-trace.o is added to multiple modules: fsl-edma mcf-edma
I tried splitting out the common parts into a separate modules, but
that adds back the complexity that a cleanup patch removed, and it
gets harder with the addition of the tracepoints.
As a minimal workaround, address it at the Kconfig level, by disallowing
the broken configurations.
Use list_for_each_entry_safe() to allow iterating through the list and
deleting the entry in the iteration process. The descriptor is freed via
idxd_desc_complete() and there's a slight chance may cause issue for
the list iterator when the descriptor is reused by another thread
without it being deleted from the list.
Fixes: 16e19e11228b ("dmaengine: idxd: Fix list corruption in description completion") Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20240603012444.11902-1-lirongqing@baidu.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
According to the IBA specification:
If a UD request packet is detected with an invalid length, the request
shall be an invalid request and it shall be silently dropped by
the responder. The responder then waits for a new request packet.
commit 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking")
defers responder length check for UD QPs in function `copy_data`.
But it introduces a regression issue for UD QPs.
When the packet size is too large to fit in the receive buffer.
`copy_data` will return error code -EINVAL. Then `send_data_in`
will return RESPST_ERR_MALFORMED_WQE. UD QP will transfer into
ERROR state.
Fixes: 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking") Signed-off-by: Honggang LI <honggangli@163.com> Link: https://lore.kernel.org/r/20240523094617.141148-1-honggangli@163.com Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The root clock is actually 49.152MHz not 40MHz, as it is derived from
the primary audio clock, update the driver to match. This error can
cause the actual clock rate to be higher than the requested clock rate
on the SPI bus.
Fixes: ef75e767167a ("spi: cs42l43: Add SPI controller support") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://msgid.link/r/20240604131704.3227500-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
bnxt_re no longer decide the number of MSI-x vectors used by itself.
Its decided by bnxt_en now. So when bnxt_en changes this value, system
crash is seen.
Depend on the max value reported by bnxt_en instead of using the its own macros.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1716195418-11767-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This functions retrieves values by passing a pointer. As the function
that retrieves them can fail before touching the pointers, the variables
must be initialized.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240619132816.11526-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The current code only restores PTP tx_avail count when we get DMA
mapping errors. Fix it so that the PTP tx_avail count will be
restored for both DMA mapping errors and skb_pad() errors.
Otherwise PTP TX timestamp will not be available after a PTP
packet hits the skb_pad() error.
Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240618215313.29631-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Adding/updating VSI list rule, as well as allocating/freeing VSI list
resource are called several times with type ICE_SW_LKUP_LAST, which fails
because ice_update_vsi_list_rule() and ice_aq_alloc_free_vsi_list()
consider it invalid. Allow calling these functions with ICE_SW_LKUP_LAST.
This fixes at least one issue in switchdev mode, where the same rule with
different action cannot be added, e.g.:
Currently, the sysctl net.netfilter.nf_hooks_lwtunnel depends on the
nf_conntrack module, but the nf_conntrack module is not always loaded.
Therefore, accessing net.netfilter.nf_hooks_lwtunnel may have an error.
Move sysctl nf_hooks_lwtunnel into the netfilter core.
Fixes: 7a3f5b0de364 ("netfilter: add netfilter hooks to SRv6 data plane") Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for
PREROUTING hook, in PREROUTING hook, we should passing a valid indev,
and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer
dereference, as below:
When destroying all sets, we are either in pernet exit phase or
are executing a "destroy all sets command" from userspace. The latter
was taken into account in ip_set_dereference() (nfnetlink mutex is held),
but the former was not. The patch adds the required check to
rcu_dereference_protected() in ip_set_dereference().
Fixes: 4e7aaa6b82d6 ("netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type") Reported-by: syzbot+b62c37cdd58103293a5a@syzkaller.appspotmail.com Reported-by: syzbot+cfbe1da5fdfc39efc293@syzkaller.appspotmail.com Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202406141556.e0b6f17e-lkp@intel.com Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This patch fixes the below build warning messages that are
caused due to linking same files to multiple modules by
exporting the required symbols.
"scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile:
otx2_devlink.o is added to multiple modules: rvu_nicpf rvu_nicvf
scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile:
otx2_dcbnl.o is added to multiple modules: rvu_nicpf rvu_nicvf"
Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx"). Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
otx2_sq_append_skb makes used of __vlan_hwaccel_push_inside()
to unoffload VLANs - push them from skb meta data into skb data.
However, it omitts a check for __vlan_hwaccel_push_inside()
returning NULL.
Found by inspection based on [1] and [2].
Compile tested only.
Fixes: fd9d7859db6c ("octeontx2-pf: Implement ingress/egress VLAN offload") Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The XDP program can't correctly handle partially checksummed
packets, but works fine with fully checksummed packets. If the
device has already validated fully checksummed packets, then
the driver doesn't need to re-validate them, saving CPU resources.
Additionally, the driver does not drop all partially checksummed
packets when VIRTIO_NET_F_GUEST_CSUM is not negotiated. This is
not a bug, as the driver has always done this.
Fixes: 436c9453a1ac ("virtio-net: keep vnet header zeroed after processing XDP") Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In virtio spec 0.95, VIRTIO_NET_F_GUEST_CSUM was designed to handle
partially checksummed packets, and the validation of fully checksummed
packets by the device is independent of VIRTIO_NET_F_GUEST_CSUM
negotiation. However, the specification erroneously stated:
"If VIRTIO_NET_F_GUEST_CSUM is not negotiated, the device MUST set flags
to zero and SHOULD supply a fully checksummed packet to the driver."
This statement is inaccurate because even without VIRTIO_NET_F_GUEST_CSUM
negotiation, the device can still set the VIRTIO_NET_HDR_F_DATA_VALID flag.
Essentially, the device can facilitate the validation of these packets'
checksums - a process known as RX checksum offloading - removing the need
for the driver to do so.
This scenario is currently not implemented in the driver and requires
correction. The necessary specification correction[1] has been made and
approved in the virtio TC vote.
[1] https://lists.oasis-open.org/archives/virtio-comment/202401/msg00011.html
Fixes: 4f49129be6fa ("virtio-net: Set RXCSUM feature if GUEST_CSUM is available") Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
commit be27b8965297 ("net: stmmac: replace priv->speed with
the portTransmitRate from the tc-cbs parameters") introduced
a problem. When deleting, it prompts "Invalid portTransmitRate
0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable.
Only when offload is enabled, speed divider needs to be calculated.
Fixes: be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240617013922.1035854-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to
obtain the first character of $ns. Empirically, this is works with bash
but not dash. When run with dash these evaluate to an empty string and
printing an error to stdout.
zones_ht is a global hashtable for flow_table with zone as key. However,
it does not consider netns when getting a flow_table from zones_ht in
tcf_ct_init(), and it means an act_ct action in netns A may get a
flow_table that belongs to netns B if it has the same zone value.
In Shuang's test with the TOPO:
tcf2_c <---> tcf2_sw1 <---> tcf2_sw2 <---> tcf2_s
tcf2_sw1 and tcf2_sw2 saw the same flow and used the same flow table,
which caused their ct entries entering unexpected states and the
TCP connection not able to end normally.
This patch fixes the issue simply by adding netns into the key of
tcf_ct_flow_table so that an act_ct action gets a flow_table that
belongs to its own netns in tcf_ct_init().
Note that for easy coding we don't use tcf_ct_flow_table.nf_ft.net,
as the ct_ft is initialized after inserting it to the hashtable in
tcf_ct_flow_table_get() and also it requires to implement several
functions in rhashtable_params including hashfn, obj_hashfn and
obj_cmpfn.
Fixes: 64ff70b80fd4 ("net/sched: act_ct: Offload established connections to flow table") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1db5b6cc6902c5fc6f8c6cbd85494a2008087be5.1718488050.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
As it says in commit 3bc07321ccc2 ("xfrm: Force a dst refcount before
entering the xfrm type handlers"):
"Crypto requests might return asynchronous. In this case we leave the
rcu protected region, so force a refcount on the skb's destination
entry before we enter the xfrm type input/output handlers."
On TIPC decryption path it has the same problem, and skb_dst_force()
should be called before doing decryption to avoid a possible crash.
Shuang reported this issue when this warning is triggered:
syzbot found hanging tasks waiting on rtnl_lock [1]
A reproducer is available in the syzbot bug.
When a request to add multiple actions with the same index is sent, the
second request will block forever on the first request. This holds
rtnl_lock, and causes tasks to hang.
Return -EAGAIN to prevent infinite looping, while keeping documented
behavior.
When the system resumes from sleep, the phy_init_hw() function invokes
config_init(), which clears all interrupt masks and causes wake events to be
lost in subsequent wake sequences. Remove interrupt mask clearing from
config_init() and preserve relevant masks in config_intr().
Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Prevent options not supported by the PHY from being requested to it by the MAC
Whenever a WOL option is supported by both, the PHY is given priority
since that usually leads to better power savings.
Fixes: e9e13b6adc33 ("lan743x: fix for potential NULL pointer dereference with bare card") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When Wake-on-LAN (WoL) is active and the system is in suspend mode, triggering
a system event can wake the system from sleep, which may block the data path.
To restore normal data path functionality after waking, disable all wake-up
events. Furthermore, clear all Write 1 to Clear (W1C) status bits by writing
1's to them.
Fixes: 4d94282afd95 ("lan743x: Add power management support") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The whole mechanism to remember occurred SPI interrupts is not atomic,
which could lead to unexpected behavior. So fix this by using atomic bit
operations instead.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20240614145030.7781-1-wahrenst@gmx.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This is trigger as below:
ns0 ns1
tun_set_iff() //dev is tun0
tun->dev = dev
//ip link set tun0 netns ns1
put_net() //ref is 0
__tun_chr_ioctl() //TUNGETDEVNETNS
net = dev_net(tun->dev);
open_related_ns(&net->ns, get_net_ns); //ns1
get_net_ns()
get_net() //addition on 0
Use maybe_get_net() in get_net_ns in case net's ref is zero to fix this
Fixes: 0c3e0e3bb623 ("tun: Add ioctl() TUNGETDEVNETNS cmd to allow obtaining real net ns of tun device") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20240614131302.2698509-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fixes: 428604fb118f ("ipv6: do not set routes if disable_ipv6 has been enabled") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240614082002.26407-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.")
added sock_hold() to the nr_heartbeat_expiry() function, where
a) a socket has a SOCK_DESTROY flag or
b) a listening socket has a SOCK_DEAD flag.
But in the case "a," when the SOCK_DESTROY flag is set, the file descriptor
has already been closed and the nr_release() function has been called.
So it makes no sense to hold the reference count because no one will
call another nr_destroy_socket() and put it as in the case "b."
Reported-by: syzbot+d327a1f3b12e1e206c16@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16 Fixes: 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.") Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
As evident from the definition of ip_options_get(), the IP option
IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet
the loop that walks the IP options to determine the total IP options
length in cipso_v4_delopt() doesn't take IPOPT_END into account.
Fix it by recognizing the IPOPT_END value as the end of actual options.
Fixes: 014ab19a69c3 ("selinux: Set socket NetLabel based on connection endpoint") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Shin'ichiro reported that when he's running fstests' test-case
btrfs/167 on emulated zoned devices, he's seeing the following NULL
pointer dereference in 'btrfs_zone_finish_endio()':
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000011: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 4 PID: 2332440 Comm: kworker/u80:15 Tainted: G W 6.10.0-rc2-kts+ #4
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
As zoned emulation mode simulates conventional zones on regular devices,
we cannot use zone-append for writing. But we're only attaching dummy
checksums if we're doing a zone-append write.
So for NOCOW zoned data writes on conventional zones, also attach a
dummy checksum.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: cbfce4c7fbde ("btrfs: optimize the logical to physical mapping for zoned writes") CC: Naohiro Aota <Naohiro.Aota@wdc.com> # 6.6+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes
that irdma would break and report hardware initialization failed after
suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5).
The problem is caused due to the collision between the irq numbers
requested in irdma and the irq numbers requested in other drivers
after suspend/resume.
The irq numbers used by irdma are derived from ice's ice_pf->msix_entries
which stores mappings between MSI-X index and Linux interrupt number.
It's supposed to be cleaned up when suspend and rebuilt in resume but
it's not, causing irdma using the old irq numbers stored in the old
ice_pf->msix_entries to request_irq() when resume. And eventually
collide with other drivers.
This patch fixes this problem. On suspend, we call ice_deinit_rdma() to
clean up the ice_pf->msix_entries (and free the MSI-X vectors used by
irdma if we've dynamically allocated them). On resume, we call
ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the
MSI-X vectors if we would like to dynamically allocate them).
Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA") Tested-by: Cyrus Lien <cyrus.lien@canonical.com> Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The Framework Laptop 16 does not have a combination headphone/headset
3.5mm jack; however, applying the pincfg from the Laptop 13 (nid=0x19)
erroneously informs hda that the node is present.
Fixes: 8804fa04a492 ("ALSA: hda/realtek: Add Framework laptop 16 to quirks") Signed-off-by: Dustin L. Howett <dustin@howett.net> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240605-alsa-hda-realtek-remove-framework-laptop-16-from-quirks-v1-1-11d47fe8ec4d@howett.net Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The kprobes and synth event generation test modules add events and lock
(get a reference) those event file reference in module init function,
and unlock and delete it in module exit function. This is because those
are designed for playing as modules.
If we make those modules as built-in, those events are left locked in the
kernel, and never be removed. This causes kprobe event self-test failure
as below.
It was discovered that some device have CBR address set to 0 causing
kernel panic when arch_sync_dma_for_cpu_all is called.
This was notice in situation where the system is booted from TP1 and
BMIPS_GET_CBR() returns 0 instead of a valid address and
!!(read_c0_brcm_cmt_local() & (1 << 31)); not failing.
The current check whether RAC flush should be disabled or not are not
enough hence lets check if CBR is a valid address or not.
Fixes: ab327f8acdf8 ("mips: bmips: BCM6358: disable RAC flush for TP1") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
read_config_dword() contains strange condition checking ret for a
number of values. The ret variable, however, is always zero because
config_access() never returns anything else. Thus, the retry is always
taken until number of tries is exceeded.
The code looks like it wants to check *val instead of ret to see if the
read gave an error response.
Fixes: 73b4390fb234 ("[MIPS] Routerboard 532: Support for base system") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The cs35l41_hda_unbind() function clears the hda_component entry
matching it's index and then dereferences the codec pointer held in the
first element of the hda_component array, this is an issue when the
device index was 0.
Instead use the codec pointer stashed in the cs35l41_hda structure as it
will still be valid.
Fixes: 7cf5ce66dfda ("ALSA: hda: cs35l41: Add device_link between HDA and cs35l41_hda") Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240531120820.35367-1-simont@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
While a device is runtime suspended along with its PCI hierarchy, the
device could get disconnected. In such case, the link will not come up no
matter how long pci_dev_wait() waits for it.
Besides the above mentioned case, there could be other ways to get the
device disconnected while pci_dev_wait() is waiting for the link to come
up.
Make pci_dev_wait() exit if the device is already disconnected to avoid
unnecessary delay.
The use cases of pci_dev_wait() boil down to two:
1. Waiting for the device after reset
2. pci_bridge_wait_for_secondary_bus()
The callers in both cases seem to benefit from propagating the
disconnection as error even if device disconnection would be more
analoguous to the case where there is no device in the first place which
return 0 from pci_dev_wait(). In the case 2, it results in unnecessary
marking of the devices disconnected again but that is just harmless extra
work.
Also make sure compiler does not become too clever with dev->error_state
and use READ_ONCE() to force a fetch for the up-to-date value.
Link: https://lore.kernel.org/r/20240208132322.4811-1-ilpo.jarvinen@linux.intel.com Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
It is reported that _DSM evaluation fails in ucsi_acpi_dsm() on Lenovo
IdeaPad Pro 5 due to a missing address space handler for the EC address
space:
ACPI Error: No handler for Region [ECSI] (000000007b8176ee) [EmbeddedControl] (20230628/evregion-130)
This happens because if there is no ECDT, the EC driver only registers
the EC address space handler for operation regions defined in the EC
device scope of the ACPI namespace while the operation region being
accessed by the _DSM in question is located beyond that scope.
To address this, modify the ACPI EC driver to install the EC address
space handler at the root of the ACPI namespace for the first EC that
can be found regardless of whether or not an ECDT is present.
Note that this change is consistent with some examples in the ACPI
specification in which EC operation regions located outside the EC
device scope are used (for example, see Section 9.17.15 in ACPI 6.5),
so the current behavior of the EC driver is arguably questionable.
The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is
not freed in the analogous exit function, so fix that.
Signed-off-by: Peng Ma <andypma@tencent.com> Acked-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
[ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Lockdep reports the below circular locking dependency issue. The
mmap_lock acquisition while holding pci_bus_sem is due to the use of
copy_to_user() from within a pci_walk_bus() callback.
Building the devices array directly into the user buffer is only for
convenience. Instead we can allocate a local buffer for the array,
bounded by the number of devices on the bus/slot, fill the device
information into this local buffer, then copy it into the user buffer
outside the bus walk callback.
======================================================
WARNING: possible circular locking dependency detected
6.9.0-rc5+ #39 Not tainted
------------------------------------------------------
CPU 0/KVM/4113 is trying to acquire lock: ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
but task is already holding lock: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
... and use it to limit the virtual terminals to just N_TTY. They are
kind of special, and in particular, the "con_write()" routine violates
the "writes cannot sleep" rule that some ldiscs rely on.
This avoids the
BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659
when N_GSM has been attached to a virtual console, and gsmld_write()
calls con_write() while holding a spinlock, and con_write() then tries
to get the console lock.
The standard PCIe configuration read-write interface is used to
access the configuration space of the peripheral PCIe devices
of the mips processor after the PCIe link surprise down, it can
generate kernel panic caused by "Data bus error". So it is
necessary to add PCIe link status check for system protection.
When the PCIe link is down or in training, assigning a value
of 0 to the configuration address can prevent read-write behavior
to the configuration space of peripheral PCIe devices, thereby
preventing kernel panic.
Signed-off-by: Songyang Li <leesongyang@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge
system with a muxless AMD Radeon dGPU. Attempting to use the dGPU fails
with the following sequence:
ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
radeon 0000:01:00.0: not ready 1023ms after resume; waiting
radeon 0000:01:00.0: not ready 2047ms after resume; waiting
radeon 0000:01:00.0: not ready 4095ms after resume; waiting
radeon 0000:01:00.0: not ready 8191ms after resume; waiting
radeon 0000:01:00.0: not ready 16383ms after resume; waiting
radeon 0000:01:00.0: not ready 32767ms after resume; waiting
radeon 0000:01:00.0: not ready 65535ms after resume; giving up
radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
The issue is that the Root Port the dGPU is connected to can't handle the
transition from D3cold to D0 so the dGPU can't properly exit runtime PM.
The existing logic in pci_bridge_d3_possible() checks for systems that are
newer than 2015 to decide that D3 is safe. This would nominally work for
an Ivy Bridge system (which was discontinued in 2015), but this system
appears to have continued to receive BIOS updates until 2017 and so this
existing logic doesn't appropriately capture it.
Add the system to bridge_d3_blacklist to prevent D3cold from being used.
Link: https://lore.kernel.org/r/20240307163709.323-1-mario.limonciello@amd.com Reported-by: Eric Heintzmann <heintzmann.eric@free.fr> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Eric Heintzmann <heintzmann.eric@free.fr> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
An overflow can occur in a situation where src.centiseconds
takes the value of 255. This situation is unlikely, but there
is no validation check anywere in the code.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Roman Smirnov <r.smirnov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240327132755.13945-1-r.smirnov@omp.ru> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Newer Qualcomm platforms (sm8450+) successfully handle busy state and
send the Command Completion after sending the Busy state. Older devices
have firmware bug and can not continue after sending the CCI_BUSY state,
but the command that leads to CCI_BUSY is already forbidden by the
NO_PARTNER_PDOS quirk.
Follow other UCSI glue drivers and drop special handling for CCI_BUSY
event. Let the UCSI core properly handle this state.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240408-qcom-ucsi-fixes-bis-v1-3-716c145ca4b1@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The Lenovo Yoga Tablet 2 Pro 1380 model is the exception to the rule that
devices which use the Crystal Cove PMIC without using ACPI for battery and
AC power_supply class support use the USB-phy for charger detection.
Unlike the Lenovo Yoga Tablet 2 830 / 1050 models this model has an extra
LC824206XA Micro USB switch which does the charger detection.
Add a DMI quirk to not set the "linux,phy_charger_detect" property on
the 1380 model. This quirk matches on the BIOS version to differentiate
the 1380 model from the 830 and 1050 models which otherwise have
the same DMI strings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240406140127.17885-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3
segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put()
handles the hw_desc considering the descs_allocated, this scenario would result in a
kernel panic (hw_desc array will be overrun).
To fix this, the proposal is to add a new member to the axi_dma_desc structure,
where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in
axi_desc_put() to handle the hw_desc array correctly.
Additionally I propose to remove the axi_chan_start_first_queued() call after completing
the transfer, since it was identified that unbalance can occur (started descriptors can
be interrupted and transfer ignored due to DMA channel not being enabled).
The incompatible device in my possession has a sticker that says
"F5U002 Rev 2" and "P80453-B", and lsusb identifies it as
"050d:0002 Belkin Components IEEE-1284 Controller". There is a bug
report from 2007 from Michael Trausch who was seeing the exact same
errors that I saw in 2024 trying to use this cable.
In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set.
If create new file or open file during this gap, these files
will not use inlinecrypt. Worse case, it may lead to data
corruption if wrappedkey_v0 is enable.
Thread A: Thread B:
-f2fs_remount -f2fs_file_open or f2fs_new_inode
-default_options
<- clear SB_INLINECRYPT flag
-fscrypt_select_encryption_impl
-parse_options
<- set SB_INLINECRYPT again
Signed-off-by: Yunlei He <heyunlei@oppo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When setting the guid via configfs it is possible to test if
its value is one of the kernel supported ones by calling
uvc_format_by_guid on it. If the result is NULL, we know the
guid is unsupported and can be ignored.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20240221-uvc-gadget-configfs-guid-v1-1-f0678ca62ebb@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If an error happens in ftrace, ftrace_kill() will prevent disarming
kprobes. Eventually, the ftrace_ops associated with the kprobes will be
freed, yet the kprobes will still be active, and when triggered, they
will use the freed memory, likely resulting in a page fault and panic.
This behavior can be reproduced quite easily, by creating a kprobe and
then triggering a ftrace_kill(). For simplicity, we can simulate an
ftrace error with a kernel module like [1]:
sudo perf probe --add commit_creds
sudo perf trace -e probe:commit_creds
# In another terminal
make
sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug
# Back to perf terminal
# ctrl-c
sudo perf probe --del commit_creds
After a short period, a page fault and panic would occur as the kprobe
continues to execute and uses the freed ftrace_ops. While ftrace_kill()
is supposed to be used only in extreme circumstances, it is invoked in
FTRACE_WARN_ON() and so there are many places where an unexpected bug
could be triggered, yet the system may continue operating, possibly
without the administrator noticing. If ftrace_kill() does not panic the
system, then we should do everything we can to continue operating,
rather than leave a ticking time bomb.
Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/ Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In the following concurrency we will access the uninitialized rs->lock:
ext4_fill_super
ext4_register_sysfs
// sysfs registered msg_ratelimit_interval_ms
// Other processes modify rs->interval to
// non-zero via msg_ratelimit_interval_ms
ext4_orphan_cleanup
ext4_msg(sb, KERN_INFO, "Errors on filesystem, "
__ext4_msg
___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state)
if (!rs->interval) // do nothing if interval is 0
return 1;
raw_spin_trylock_irqsave(&rs->lock, flags)
raw_spin_trylock(lock)
_raw_spin_trylock
__raw_spin_trylock
spin_acquire(&lock->dep_map, 0, 1, _RET_IP_)
lock_acquire
__lock_acquire
register_lock_class
assign_lock_key
dump_stack();
ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10);
raw_spin_lock_init(&rs->lock);
// init rs->lock here
and get the following dump_stack:
=========================================================
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 12 PID: 753 Comm: mount Tainted: G E 6.7.0-rc6-next-20231222 #504
[...]
Call Trace:
dump_stack_lvl+0xc5/0x170
dump_stack+0x18/0x30
register_lock_class+0x740/0x7c0
__lock_acquire+0x69/0x13a0
lock_acquire+0x120/0x450
_raw_spin_trylock+0x98/0xd0
___ratelimit+0xf6/0x220
__ext4_msg+0x7f/0x160 [ext4]
ext4_orphan_cleanup+0x665/0x740 [ext4]
__ext4_fill_super+0x21ea/0x2b10 [ext4]
ext4_fill_super+0x14d/0x360 [ext4]
[...]
=========================================================
Normally interval is 0 until s_msg_ratelimit_state is initialized, so
___ratelimit() does nothing. But registering sysfs precedes initializing
rs->lock, so it is possible to change rs->interval to a non-zero value
via the msg_ratelimit_interval_ms interface of sysfs while rs->lock is
uninitialized, and then a call to ext4_msg triggers the problem by
accessing an uninitialized rs->lock. Therefore register sysfs after all
initializations are complete to avoid such problems.
Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240102133730.1098120-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If devm_add_action() returns -ENOMEM, then MSIs are allocated but not
not freed on teardown. Use devm_add_action_or_reset() instead to keep
the static analyser happy.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Aleksandr Aprelkov <aaprelkov@usergate.com> Link: https://lore.kernel.org/r/20240403053759.643164-1-aaprelkov@usergate.com
[will: Tweak commit message, remove warning message] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The P2SB could get an invalid BAR from the BIOS, and that won't be fixed
up until pcibios_assign_resources(), which is an fs_initcall().
- Move p2sb_fs_init() to an fs_initcall_sync(). This is still early
enough to avoid a race with any dependent drivers.
- Add a check for IORESOURCE_UNSET in p2sb_valid_resource() to catch
unset BARs going forward.
- Return error values from p2sb_fs_init() so that the 'initcall_debug'
cmdline arg provides useful data.
Signed-off-by: Ben Fradella <bfradell@netapp.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Klara Modin <klarasmodin@gmail.com> Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20240509164905.41016-1-bcfradella@proton.me Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
With -Wextra clang warns about pointer arithmetic using a null pointer.
When building with CONFIG_PCI=n, that triggers a warning in the IO
accessors, eg:
In file included from linux/arch/powerpc/include/asm/io.h:672:
linux/arch/powerpc/include/asm/io-defs.h:23:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
23 | DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
linux/arch/powerpc/include/asm/io.h:591:53: note: expanded from macro '__do_inb'
591 | #define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port);
| ~~~~~~~~~~~~~~~~~~~~~ ^
That is because when CONFIG_PCI=n, _IO_BASE is defined as 0.
Although _IO_BASE is defined as plain 0, the cast (PCI_IO_ADDR) converts
it to void * before the addition with port happens.
Instead the addition can be done first, and then the cast. The resulting
value will be the same, but avoids the warning, and also avoids void
pointer arithmetic which is apparently non-standard.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Closes: https://lore.kernel.org/all/CA+G9fYtEh8zmq8k8wE-8RZwW-Qr927RLTn+KqGnq1F=ptaaNsA@mail.gmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240503075619.394467-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Modify the code so it can be compiled tested in configurations that do
not have ACPI enabled.
It fixes the following errors:
drivers/media/pci/intel/ipu-bridge.c:103:30: error: implicit declaration of function ‘acpi_device_handle’; did you mean ‘acpi_fwnode_handle’? [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:103:30: warning: initialization of ‘acpi_handle’ {aka ‘void *’} from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
drivers/media/pci/intel/ipu-bridge.c:110:17: error: implicit declaration of function ‘for_each_acpi_dev_match’ [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:110:74: error: expected ‘;’ before ‘for_each_acpi_consumer_dev’
drivers/media/pci/intel/ipu-bridge.c:104:29: warning: unused variable ‘consumer’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:103:21: warning: unused variable ‘handle’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:166:38: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:185:43: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:191:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:196:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:202:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:223:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:236:18: error: implicit declaration of function ‘acpi_get_physical_device_location’ [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:236:56: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:238:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:256:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:275:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:280:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:469:26: error: implicit declaration of function ‘acpi_device_hid’; did you mean ‘dmi_device_id’? [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:468:74: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=]
drivers/media/pci/intel/ipu-bridge.c:637:58: error: expected ‘;’ before ‘{’ token
drivers/media/pci/intel/ipu-bridge.c:696:1: warning: label ‘err_put_adev’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:693:1: warning: label ‘err_put_ivsc’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:691:1: warning: label ‘err_free_swnodes’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:632:40: warning: unused variable ‘primary’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:632:31: warning: unused variable ‘fwnode’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:733:73: error: expected ‘;’ before ‘{’ token
drivers/media/pci/intel/ipu-bridge.c:725:24: warning: unused variable ‘csi_dev’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:724:43: warning: unused variable ‘adev’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:599:12: warning: ‘ipu_bridge_instantiate_ivsc’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:444:13: warning: ‘ipu_bridge_create_connection_swnodes’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:297:13: warning: ‘ipu_bridge_create_fwnode_properties’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:155:12: warning: ‘ipu_bridge_check_ivsc_dev’ defined but not used [-Wunused-function]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
plpar_hcall(), plpar_hcall9(), and related functions expect callers to
provide valid result buffers of certain minimum size. Currently this
is communicated only through comments in the code and the compiler has
no idea.
For example, if I write a bug like this:
long retbuf[PLPAR_HCALL_BUFSIZE]; // should be PLPAR_HCALL9_BUFSIZE
plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, ...);
This compiles with no diagnostics emitted, but likely results in stack
corruption at runtime when plpar_hcall9() stores results past the end
of the array. (To be clear this is a contrived example and I have not
found a real instance yet.)
To make this class of error less likely, we can use explicitly-sized
array parameters instead of pointers in the declarations for the hcall
APIs. When compiled with -Warray-bounds[1], the code above now
provokes a diagnostic like this:
error: array argument is too small;
is of size 32, callee requires at least 72 [-Werror,-Warray-bounds]
60 | plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf,
| ^ ~~~~~~
[1] Enabled for LLVM builds but not GCC for now. See commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") and
related changes.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240408-pseries-hvcall-retbuf-v1-1-ebc73d7253cf@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
There is a race condition in which a rendering job might take just long
enough to trigger the drm sched job timeout handler but also still
complete before the hard reset is done by the timeout handler.
This runs into race conditions not expected by the timeout handler.
In some very specific cases it currently may result in a refcount
imbalance on lima_pm_idle, with a stack dump such as:
We can prevent that race condition entirely by masking the irqs at the
beginning of the timeout handler, at which point we give up on waiting
for that job entirely.
The irqs will be enabled again at the next hard reset which is already
done as a recovery by the timeout handler.
This is needed because we want to reset those devices in device-agnostic
code such as lima_sched.
In particular, masking irqs will be useful before a hard reset to
prevent race conditions.
projects / mirror_ubuntu-kernels.git / log