Olof Johansson [Mon, 19 Jun 2017 04:02:19 +0000 (21:02 -0700)]
Merge tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
arm64: tegra: Device tree changes for v4.13-rc1
This adds the CCPLEX cluster on Tegra186, which is used to initiate CPU
frequency and voltage transitions.
Also included is a bit of cleanup for PCI related device tree content,
in preparation for a future DTC release that has additional checks for
the PCI bus.
* tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: dts: nvidia: fix PCI bus dtc warnings
arm64: tegra: Add CCPLEX_CLUSTER area in Tegra186
Olof Johansson [Mon, 19 Jun 2017 03:56:42 +0000 (20:56 -0700)]
Merge tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi into next/dt64
ARM64: DT: Hisilicon SoC DT updates for 4.13
- Add and update Hi3660-Hikey960 board, Hi3660 PCIe RC, Hi6421v530 MFD and
Hi3660 MMC binding
- Add and refine devices support for Hi3660-Hikey 960 including clock, reset,
I2C, GPIO, UART, Bluetooth, RTC, Power Key, LED, SPI, timer, PMIC, regulator,
sd/sdio and WiFi
- Add k3-dma and i2s/hdmi audio support based on audio-card-graph method for
Hikey board
* tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi: (21 commits)
arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support
arm64: dts: hi3660-hikey960: add nodes for WiFi
arm64: dts: hi3660: add sd/sdio device nodes
dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc
arm64: dts: hikey960: add device node for pmic and regulators
dt-bindings: mfd: hi6421: Add hi6421v530 compatible string
arm64: dts: hisi: add kirin pcie node
dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs
arm64: dts: hi3660: add sp804 timer node
arm64: dts: hi3660: add spi device nodes
arm64: dts: hikey960: add LED nodes
arm64: dts: hi3660: add power key dts node
arm64: dts: hi3660: Add pl031 rtc node
arm64: dts: hikey960: add WL1837 Bluetooth device node
arm64: dts: hi3660: Add uarts nodes
arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC
arm64: dts: Add I2C nodes for Hi3660
arm64: dts: hi3660: add resources for clock and reset
arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig
arm64: dts: hisilicon: update compatible string for hikey960
...
Olof Johansson [Mon, 19 Jun 2017 03:55:51 +0000 (20:55 -0700)]
Merge tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
ARMv8 Vexpress/Juno DT updates for v4.13
1. Adds support for Coresight CPU debug MMIO interface on all Juno variants.
2. Enables support for few SMMUs on Juno which were previously disabled
waiting for IOMMU-backed DMA API support to be stabilised.
* tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: enable some SMMUs
arm64: dts: juno: add coresight CPU debug nodes
Olof Johansson [Mon, 19 Jun 2017 03:45:17 +0000 (20:45 -0700)]
Merge tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Allwinner H5 DT changes for 4.13
Just like the H3, this is mostly about enabling the EMAC on the H5, and
also has a new board, the Orange Pi Zero Plus 2
* tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support
arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2
arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime
arm64: allwinner: h5: sort the device nodes in / part for some boards
arm64: allwinner: h5: add support for NanoPi NEO2 board
arm64: allwinner: h5: add support for Orange Pi Prime board
arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i
arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
Olof Johansson [Mon, 19 Jun 2017 03:41:35 +0000 (20:41 -0700)]
Merge tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Allwinner arm64 DT changes for 4.13
Our usual arm64 changes. The most notable things are the EMAC support and
USB support enhancements. There's also support for the SoPine SoM, and the
OrangePi Win.
* tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support
arm64: allwinner: a64: add device tree for SoPine with baseboard
arm64: allwinner: bananapi-m64: Enable dwmac-sun8i
arm64: allwinner: pine64-plus: Enable dwmac-sun8i
arm64: allwinner: pine64: Enable dwmac-sun8i
arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
arm64: allwinner: sun50i-a64: Add dt node for the syscon control module
arm64: allwinner: a64: add DTSI file for SoPine SoM
arm64: allwinner: a64: Convert CCU raw number references to macros
arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
arm64: allwinner: a64: enable RSB on A64
arm64: dts: allwinner: pine64: Add remaining UART aliases
arm64: dts: allwinner: a64: Add UART2 pin nodes
arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64
arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI
Olof Johansson [Mon, 19 Jun 2017 03:18:44 +0000 (20:18 -0700)]
Merge tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.13. Please note the following from Eric:
I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
patch series, but it does require being careful since it involves a cross-merge
between branches.
- Anup documents the Broadcom Stingray binding, common clocks, adds initial
support for the Stingray DTSI and DTS files and adds support for the PL022,
PL330 and SP805
- Sandeep adds the clock nodes to the Stingray Device Tree nodes
- Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes
- Oza adds I2C Device Tree nodes to the Stingray DTSes
- Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC
- Ravijeta adds support for the USB Dual Role PHY on Northstar 2
- Gerd starts adding references to the sdhost and sdhci controllers, and then
switches the sdcard to to use the SDHOST (faster than SDHCI)
- Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
thermal driver to work correctly
* tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2: Add USB DRD PHY device tree node
ARM64: dts: bcm2837: Define CPU thermal coefficients
arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
arm64: dts: Add I2C DT nodes for Stingray SoC
arm64: dts: Add GPIO DT nodes for Stingray SOC
arm64: dts: Add pinctrl DT nodes for Stingray SOC
arm64: dts: Add NAND DT nodes for Stingray SOC
arm64: dts: Add clock DT nodes for Stingray SOC
arm64: dts: Initial DTS files for Broadcom Stingray SOC
dt-bindings: clk: Extend binding doc for Stingray SOC
dt-bindings: bcm: Add Broadcom Stingray bindings document
ARM: dts: bcm283x: switch from &sdhci to &sdhost
arm64: dts: bcm2837: add &sdhci and &sdhost
ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Olof Johansson [Mon, 19 Jun 2017 03:12:57 +0000 (20:12 -0700)]
Merge tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64
UniPhier ARM64 SoC DT updates for v4.13
- specify timing delay properties of eMMC
- fix W=1 build warnings
- increase memory reserve size
- use SPDX License Identifier
- add new board support (LD11/LD20 global)
* tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: add support for LD20 Global board
arm64: dts: uniphier: add support for LD11 Global board
arm64: dts: uniphier: use SPDX-License-Identifier
arm64: dts: uniphier: reserve more memory for LD11/LD20
arm64: dts: uniphier: fix simple-bus unit address format error
arm64: dts: uniphier: Use - instead of @ for DT OPP entries
arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC
arm64: dts: uniphier: add input-delay properties to Cadence eMMC node
Olof Johansson [Mon, 19 Jun 2017 02:35:00 +0000 (19:35 -0700)]
Merge tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek into next/dt64
Add device tree nodes for
mt8173:
- split USB SuperSpeed port in HighSpeed and SuperSpeed ports.
- move USB phy clocks up in hierarchy to met new bindings description
- move MDP nodes up in hierarchy to met new bindings description
mt6797:
- add basic SoC support
- add clock driver
- add power domain
dt-bindings:
- clean-up i2c binding description
- add binding for mt2701 i2c node
- add fallback compatible to scpsys binding description
- add bindings description for mt7622 and mt6796
* tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek:
dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC
arm64: dts: mt8173: Fix mdp device tree
dt-bindings: i2c: Add Mediatek MT2701 i2c binding
dt-bindings: i2c-mtk: Add mt7623 binding
dt-bindings: i2c-mtk: Delete bindings
dt-bindings: i2c-mt6577: Rename file to reflect bindings
dt-bindings: mtk-sysirq: Correct bindings for supported SoCs
arm64: dts: mediatek: add clk and scp nodes for MT6797
dt-bindings: mediatek: add MT6797 power dt-bindings
arm64: dts: mediatek: add mt6797 support
dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform
arm64: dts: mt8173: move clock from phy node into port nodes
arm64: dts: mt8173: split usb SuperSpeed port into two ports
Olof Johansson [Mon, 19 Jun 2017 02:11:03 +0000 (19:11 -0700)]
Merge tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Samsung DeviceTree ARM64 update for v4.13:
1. Remove unneeded TE interrupt gpio property.
* tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
Olof Johansson [Mon, 19 Jun 2017 02:08:10 +0000 (19:08 -0700)]
Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Support for the new rk3399 firefly board; extending the pcie ranges to
make usage of pci switches possible; some more qos and pinctrl nodes on
rk3399; updates for the rk3399 cpu operating points including separate
opps for the higher rates OP1 variant of the chip and mmc-nodes for
the rk3328.
* tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: update common rk3399 operating points
arm64: dts: rockchip: introduce rk3399-op1 operating points
arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly
arm64: dts: rockchip: add ethernet0 alias on rk3399
arm64: dts: rockchip: bring rk3399-firefly power-tree in line
arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs
arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399
arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399
arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals
arm64: dts: rockchip: add some missing qos nodes on rk3399
arm64: dts: rockchip: add support for firefly-rk3399 board
dt-bindings: add firefly-rk3399 board support
John Stultz [Wed, 14 Jun 2017 18:25:17 +0000 (11:25 -0700)]
arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support
Add entry for k3-dma driver and i2s/hdmi audio devices.
This enables HDMI audio output.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Andy Green <andy@warmcat.com> Cc: Dave Long <dave.long@linaro.org> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Antonio Borneo <borneo.antonio@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
v2:
* Split core i2s entry into dtsi and hdmi specific bits into
hikey dts
v4:
* Rework simple-card to use many-dai-links method, as
there may be other links in the future
v5:
* Rework audio description to use the audio-card-graph method
as requested by Mark. Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Leo Yan [Thu, 15 Jun 2017 03:04:10 +0000 (11:04 +0800)]
arm64: dts: hi3660: add sp804 timer node
The Hi3660 SoC comes with the sp804 timer in addition to the
architecture timers. These ones are shutdown when reaching a deep idle
states and a backup timer is needed. The sp804 belongs to another power
domain and can fulfill the purpose of replacing temporarily an
architecture timer when the CPU is idle.
Describe it in the device tree, so it can be enabled at boot time.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Chen Jun [Thu, 15 Jun 2017 03:04:07 +0000 (11:04 +0800)]
arm64: dts: hi3660: add power key dts node
We use gpio_034 as power key on hikey960, and set gpio with pull-up
state, when key press the voltage on the gpio will come to lower, and
power key event will be reported.
Signed-off-by: Chen Jun <chenjun14@huawei.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Chen Feng [Thu, 15 Jun 2017 03:04:04 +0000 (11:04 +0800)]
arm64: dts: hi3660: Add uarts nodes
Add nodes uart0 to uart4 and uart6 for hi3660 SoC.
Enable uart3 and uart6, disable uart5, in hikey960 board dts.
On HiKey960:
- UART6 is used as default console, and is wired out through low speed
expansion connector.
- UART3 has RTS/CTS hardware handshake, and is wired out through low
speed expansion connector.
- UART5 is not used in commercial launched boards. So disable it.
- UART4 is connected to Bluetooth, WL1837.
Wang Xiaoyin [Thu, 15 Jun 2017 03:04:00 +0000 (11:04 +0800)]
arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig
This commit adds more pinmux and pinctrl information for devices
on HiKey960, including i2c, spi, cam, uart, ufs, pcie, csi, pwr_key,
isp, sd/sdio, i2s, and usb.
Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com> Signed-off-by: Chen Jun <chenjun14@huawei.com> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Florian Fainelli [Tue, 13 Jun 2017 19:39:57 +0000 (12:39 -0700)]
Merge tag 'bcm2835-dt-64-next-2017-06-08' into devicetree-arm64/next
This pull request brings in the switch to sdhost for MMC on RPi3
(improving storage performance and leaving sdhci for wireless), and
the correct CPU thermal coefficients.
The thermal changes required a merge from bcm2835-dt-next, where the
nodes were added.
Daniel Kurtz [Tue, 23 May 2017 03:24:10 +0000 (11:24 +0800)]
arm64: dts: mt8173: Fix mdp device tree
If the mdp_* nodes are under an mdp sub-node, their corresponding
platform device does not automatically get its iommu assigned properly.
Fix this by moving the mdp component nodes up a level such that they are
siblings of mdp and all other SoC subsystems. This also simplifies the
device tree.
Although it fixes iommu assignment issue, it also break compatibility
with old device tree. So, the patch in driver is needed to iterate over
sibling mdp device nodes, not child ones, to keep driver work properly.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Matthias Brugger [Mon, 22 May 2017 09:40:20 +0000 (11:40 +0200)]
dt-bindings: i2c-mtk: Delete bindings
The bindings file list bindings for mt1827 and mt8135 but
these bindings are not supported by the driver. Remove the bindings.
Also do some minor style changes to the compatible documentation
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de>
Masahiro Yamada [Mon, 5 Jun 2017 03:57:59 +0000 (12:57 +0900)]
arm64: dts: uniphier: use SPDX-License-Identifier
Follow the recent trend for the license description, and fix the wrongly
stated X11 to MIT.
The X11 license text [1] is explicitly for the X Consortium and has a
couple of extra clauses. The MIT license text [2] is actually what the
current DT files claim.
Masahiro Yamada [Fri, 26 May 2017 08:18:15 +0000 (17:18 +0900)]
arm64: dts: uniphier: reserve more memory for LD11/LD20
Reserve enough space below the kernel base.
The assumed address map is: 80000000 - 80ffffff : for IPP 81000000 - 81ffffff : for ARM secure 82000000 - : for Linux
Icenowy Zheng [Wed, 7 Jun 2017 00:23:05 +0000 (08:23 +0800)]
arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2
Add the required DT parts to enable Ethernet (dwmac-sun8i driver) on
the Nano Pi NEO2 board. It uses an external Realtek RTL8211E PHY
connected via RGMII to provide GbE network. Specially unlike other
Allwinner boards, the phy is connected to MDIO address 7, not 1.
This includes the regulator (which is controlled by a GPIO pin) and
the actual Ethernet MAC node, referring the RGMII pins of the device.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Icenowy Zheng [Wed, 7 Jun 2017 00:23:04 +0000 (08:23 +0800)]
arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime
Add the required DT parts to enable Ethernet (dwmac-sun8i driver) on
the Orange Pi Prime board. It uses an external Realtek RTL8211E PHY
connected via RGMII to provide GbE network.
This includes the regulator (which is controlled by a GPIO pin) and
the actual Ethernet MAC node, referring the RGMII pins of the device.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Icenowy Zheng [Wed, 7 Jun 2017 00:23:03 +0000 (08:23 +0800)]
arm64: allwinner: h5: sort the device nodes in / part for some boards
The reg_vcc3v3 node is wrongly placed at the start of the / part, but
not with other fixed regulators used by the board, which makes the
device nodes unsorted.
As Orange Pi Prime and Nano Pi NEO2 device trees are copy'n'paste works,
they share the device node unsorted issue.
Fix this by move reg_vcc3v3 node to the position before reg_usb0_vbus.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The dwmac-sun8i is an Ethernet MAC that supports 10/100/1000 Mbit
connections. It is very similar to the device found in the Allwinner
H3, but lacks the internal 100 Mbit PHY and its associated control
bits.
This adds the necessary bits to the Allwinner A64 SoC .dtsi, but keeps
it disabled at this level.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Icenowy Zheng [Sun, 4 Jun 2017 02:43:44 +0000 (10:43 +0800)]
arm64: allwinner: a64: add DTSI file for SoPine SoM
SoPine is a SoM by Pine64, which have a gold finger compatible with the
slot of DDR3 SODIMM (signals are not compatible), and have an A64, an
AXP803, a LPDDR3 DRAM chip, a power led and a MicroSD slot on it.
The card detect pin of the MicroSD slot on the SoM is pulled down, which
makes it unusable; however, the slot is at the surface of the SoM that
is closed to the baseboard, so it's nearly impossible to hot-swap it,
thus I make it non-removable.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Chen-Yu Tsai [Mon, 5 Jun 2017 09:00:33 +0000 (17:00 +0800)]
arm64: allwinner: a64: Convert CCU raw number references to macros
The A64 device tree file has some remnants of raw number references
to the CCU node, likely from when the CCU bindings and device tree
changes were first merged.
Convert these, and the R_CCU ones, to use the proper defined macros
from their respective device tree binding header files.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Andreas Färber [Tue, 18 Apr 2017 19:25:38 +0000 (21:25 +0200)]
arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
Pine64 exposes all A64 UARTs, not just UART0.
Since the pins can be used as GPIO, don't enable the new UART nodes by
default, but prepare the pinctrl settings to aid in activating them via
overlays, i.e., overriding the status property of &uartX nodes.
For UART4 (Euler) the safer route of not including RTS/CTS pins is chosen,
whereas for UART1 (Bluetooth) they are included.
Add the corresponding pinctrl nodes where missing.
Suggested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
arm64: allwinner: h5: add support for Orange Pi Prime board
Orange Pi Prime is a new Allwinner H5-based SBC by Xunlong.
It's like a Orange Pi Plus 2E with H3 replaced with H5, eMMC replaced
with onboard SPI NOR Flash and wireless card changed to Realtek
RTL8723BS (with Bluetooth functionality).
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The dwmac-sun8i hardware is present on the Orange PI PC2.
It uses an external PHY rtl8211e via RGMII.
This patch create the needed regulator, emac and phy nodes. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Chen-Yu Tsai [Mon, 5 Jun 2017 09:00:32 +0000 (17:00 +0800)]
ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
Now that the R_CCU device tree binding headers have been merged, we
can convert the raw number references in the device trees to use the
defined macros.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Anup Patel [Fri, 2 Jun 2017 06:34:28 +0000 (12:04 +0530)]
arm64: dts: Initial DTS files for Broadcom Stingray SOC
The Broadcom Stingray SoC is a new member in Broadcom iProc
SoC family.
This patch adds initial DTS files for Broadcom Stingray SoC
and two of its reference boards (bcm958742k and bcm958742t).
We have lot of reference boards and large number of devices
in Broadcom Stingray SoC so eventually we will have quite
a few DTS files for Stingray. To tackle, we have added a
separate directory for Stingray DTS files.
Signed-off-by: Anup Patel <anup.patel@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Olof Johansson [Fri, 2 Jun 2017 00:25:24 +0000 (17:25 -0700)]
Merge tag 'renesas-arm64-dt-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Renesas ARM64 Based SoC DT Updates for v4.13
* Add support for R-Car H3 ES2.0
* Break out common board support
* Set drive-strength for ravb pins for r8a7795/h3ulcb and r8a7796/m3ulcb
* Enable HDMI outputs on r8a7795/salvator-x
* Add R-Car audio to DT of r8a7796 SoC
* Add current sense amplifiers to DT of r8a779[56]/salvator-x
* Enable NFS-root on r8a7796/salvator-x
* Enable HS200 for eMMC on r8a779[56]/salvator-x,
r8a7795/h3ulcb and r8a7796/m3ulcb
* Enable EthernetAVB, I2C r8a7796/m3ulcb
* Update memory node to 2 GiB map on r8a7796/m3ulcb
* tag 'renesas-arm64-dt-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (35 commits)
arm64: dts: r8a7795: salvator-x: Add support for R-Car H3 ES2.0
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
arm64: dts: ulcb: Set drive-strength for ravb pins
arm64: dts: renesas: r8a7795-salvator-x: Enable HDMI outputs
arm64: dts: renesas: r8a7795-salvator-x: Add DU external dot clocks
arm64: dts: renesas: salvator-x: Add HDMI output connectors
arm64: dts: renesas: salvator-x: Add DU external dot clock sources
arm64: dts: renesas: r8a7795: Add HDMI encoder support
arm64: dts: salvator-x: Add panel backlight support
arm64: dts: r8a7796: Add PWM device nodes
arm64: dts: r8a7796: add Sound MIX support
arm64: dts: r8a7796: add Sound CTU support
arm64: dts: r8a7796: add Sound DVC support
arm64: dts: r8a7796: add Sound SRC support
arm64: dts: r8a7796: add Sound SSI DMA support
arm64: dts: r8a7796: add Sound SSI PIO support
arm64: dts: r8a7796: add AUDIO_DMAC support
arm64: dts: salvator-x: Add current sense amplifiers
arm64: dts: renesas: Extract common ULCB board support
arm64: dts: renesas: Extract common Salvator-X board support
...