Sean Young [Tue, 4 Jun 2019 11:19:30 +0000 (07:19 -0400)]
media: ttpci: use rc-core for the IR receiver
The IR protocol can now only be set via the rc protocols sysfs file rather
than via module parameters or a custom procfs file. So, it is no longer
necessary to periodically check for protocol changes.
The IR_RCMM protocol does not decode the Philips RC-MM protocol (12, 24 or
32 bit variants) or any protocol rc-core can encode, so this is marked
RC_PROTO_UNKNOWN.
Tested on Technotrend/Hauppauge WinTV Nexus-S rev2.1, which comes
with a small black hauppauge remote.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Tobias Klausmann [Wed, 29 May 2019 18:02:06 +0000 (14:02 -0400)]
media: stv090x: Implement probe/remove for stv090x
Move common code into a new function.
This provides the needed functionality to use dvb_module_probe() instead
of dvb_attach()!
[mchehab+samsung@kernel.org: fix an out of order error return code] Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fabio Estevam [Wed, 5 Jun 2019 20:53:33 +0000 (16:53 -0400)]
media: Revert "media: staging/imx: Allow driver to build if COMPILE_TEST is enabled"
Commit 020bc7354a6e ("media: staging/imx: Allow driver to build
if COMPILE_TEST is enabled") incorrectly assumed that the imx media
driver had no build time dependency with IMX_IPUV3_CORE.
Building on x86_64 without IMX_IPUV3_CORE causes lots of build errors
such as:
All these definitions come from the imx ipu3 core driver, so make
sure that imx media depends on IMX_IPUV3_CORE.
Kefeng Wang [Wed, 5 Jun 2019 13:08:20 +0000 (09:08 -0400)]
media: pvrusb2: fix null-ptr-deref in class_unregister()
The class_ptr will be NULL if pvr2_sysfs_class_create() fails
in pvr_init(), when call pvr2_sysfs_class_destroy(), it will
lead to null-ptr-deref, fix it.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In case of ioremap failure, the core code will take care of printing
the error message, so there is no need for having a local error
message in the driver.
media: aspeed: use different delays for triggering VE H/W reset
In case of watchdog timeout detected while doing mode detection,
it's better triggering video engine hardware reset immediately so
this commit fixes code for the case. Other than the case, it will
trigger video engine hardware reset after RESOLUTION_CHANGE_DELAY.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are cases that interrupt bits are cleared by a 500ms delayed
work which causes unnecessary irq calls. Also, the current
interrupt handler returns IRQ_HANDLED always but it should return
IRQ_NONE if there is any unhandled interrupt. So this commit
refines the interrupt handling logic to fix these issues.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE
VE_INTERRUPT_CAPTURE_COMPLETE and VE_INTERRUPT_COMP_COMPLETE are
not set at the same time but the current interrupt handling
mechanism of this driver doesn't clear the interrupt flag until
both two are set, and this behavior causes unnecessary interrupt
handler calls. In fact, this driver provides JPEG format only so
taking care of the VE_INTERRUPT_COMP_COMPLETE is enough for getting
compressed image frame so this commit gets rid of the
VE_INTERRUPT_CAPTURE_COMPLETE checking logic to simplify the logic.
Handling of VE_INTERRUPT_CAPTURE_COMPLETE could be added back later
when it's actually needed.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Currently, this driver prints out too much log messages when a
mode change happens, video turned off by screen saver and etc.
Actually, all cases are reported to user space properly. Also,
these are not critical errors but recoverable things, so this
commit changes the log level of some noisy printing outs.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Video Engine has a dedicated interrupt line so this driver doesn't
need to use IRQF_SHARED flag so remove it. Also, it'd be good for
following what Thomas recommended in the IRQF_ONESHOT support
patch like below:
"Note that for now IRQF_ONESHOT cannot be used with IRQF_SHARED to
avoid complex accounting mechanisms."
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Differently from other Aspeed drivers, this driver calls clock
control APIs in interrupt context. Since ECLK is coupled with a
reset bit in clk-aspeed module, aspeed_clk_enable will make 10ms of
busy waiting delay for triggering the reset and it will eventually
disturb other drivers' interrupt handling. To fix this issue, this
commit changes this driver's irq to threaded irq so that the delay
can be happened in a thread context.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Currently, this driver calls clk_prepare and clk_unprepare from
interrupt context too but these should be called from sleepable
context only. To fix this issue, this commit splits out
clk_enable/disable and clk_prepare/unprepare, and it places
clk_prepare/unprepare calls into the module probe/remove function.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Wed, 5 Jun 2019 11:16:21 +0000 (07:16 -0400)]
media: cxusb: Revert "media: cxusb: add raw mode support for, Medion MD95700"
This patch shouldn't have been included in the pull request as it adds
a non-standard raw mode that is for debugging only. So revert
commit ead14a70754f8d7f5dbcb0553c7f11eb0fc4a6ac.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Tue, 4 Jun 2019 14:55:15 +0000 (10:55 -0400)]
media: vivid: fix incorrect assignment operation when setting video mode
The assigment of FB_VMODE_NONINTERLACE to var->vmode should be a
bit-wise or of FB_VMODE_NONINTERLACE instead of an assignment,
otherwise the previous clearing of the FB_VMODE_MASK bits of
var->vmode makes no sense and is redundant.
Addresses-Coverity: ("Unused value") Fixes: ad4e02d5081d ("[media] vivid: add a simple framebuffer device for overlay testing") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Yunfei Dong [Tue, 4 Jun 2019 09:37:37 +0000 (05:37 -0400)]
media: mtk-vcodec: support single-buffer frames
MT8183 will use a multi-planar format backed by a single buffer. Adapt
the existing code to be able to handle such frames instead of assuming
each frame is backed by two buffers.
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
[acourbot: refactor, cleanup and split]
Change the way subdevices check if the stream is running. Verify the stream
pointer instead of src_frame. This makes easier to get rid of the void* and
u8* that points to frames in the subdevices structs.
Remove checks that s_stream does on subdevices. They are redundant since
the Media Controller Framework doesn't allow two streaming on the same
media pipeline at the same time.
media: media/doc: Allow sizeimage to be set by v4l clients
This changes v4l2_pix_format and v4l2_plane_pix_format sizeimage
field description to allow v4l clients to set bigger image size
in case of variable length compressed data.
Presently s5p-mfc and mtk-vcodec codec drivers use that. Lets
make it obvious in the documentation.
Most if not all codecs will need to implement these ioctls and
it is expected to be the same for all codecs. So add this to
the core v4l2-mem2mem framework so that this code can easily be
reused.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Boris Brezillon [Tue, 4 Jun 2019 07:06:25 +0000 (03:06 -0400)]
media: v4l2: Get rid of ->vidioc_enum_fmt_vid_{cap, out}_mplane
Support for multiplanar and singleplanar formats is mutually exclusive,
at least in practice. In our attempt to unify support for support for
mplane and !mplane in v4l, let's get rid of the
->vidioc_enum_fmt_{vid,out}_cap_mplane() hooks and call
->vidioc_enum_fmt_{vid,out}_cap() instead.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
[hverkuil-cisco@xs4all.nl: fix typos: pirv -> priv and prov -> priv] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Jun 2019 11:32:50 +0000 (07:32 -0400)]
media: dt-bindings: Fix vendor-prefixes YAML
Commit 8df39e16877f ("media: dt-bindings: media: Add vendor prefix for
allegro") introduced a new devicetree binding vendors, however with an
improper syntax making the resulting YAML impossible to parse. Let's fix
this.
Fixes: 8df39e16877f ("media: dt-bindings: media: Add vendor prefix for allegro") Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Neil Armstrong [Fri, 31 May 2019 10:33:15 +0000 (06:33 -0400)]
media: platform: ao-cec-g12a: disable regmap fast_io for cec bus regmap
With fast_io enabled, spinlock_irq is used for read/write operations,
thus leading to :
BUG: sleeping function called from invalid context at [snip]/ao-cec-g12a.c:379
in_atomic(): 1, irqs_disabled(): 128, pid: 1451, name: irq/14-ff800280
[snip]
Call trace:
dump_backtrace+0x0/0x180
show_stack+0x14/0x1c
dump_stack+0xa8/0xe0
___might_sleep+0xf4/0x104
__might_sleep+0x4c/0x80
meson_ao_cec_g12a_read+0x7c/0x164
regmap_read+0x16c/0x1b0
meson_ao_cec_g12a_irq_thread+0xcc/0x200
irq_thread_fn+0x2c/0x60
irq_thread+0x14c/0x1fc
kthread+0x11c/0x12c
ret_from_fork+0x10/0x18
Simply remove fast_io to use mutexes instead.
Fixes: b7778c46683c ("media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Thu, 30 May 2019 18:59:24 +0000 (14:59 -0400)]
media: cx23885: remove redundant assignment to err
The variable err is assigned with a value that is never read and
it is re-assigned a new value later on. The assignment is redundant
and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 30 May 2019 06:45:48 +0000 (02:45 -0400)]
media: dvb-usb/cxusb-analog.c: fix coccinelle warning, use ktime.h
This patch fixes a coccinelle warning and includes ktime.h instead of
timekeeping.h. The first includes the latter, but the latter doesn't
exist before 3.17, causing problems for our compat build. It's easier
to just use ktime.h instead.
coccinelle warnings: (new ones prefixed by >>)
>> drivers/media/usb/dvb-usb/cxusb-analog.c:1498:41-42: WARNING: Use ARRAY_SIZE
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kefeng Wang [Thu, 30 May 2019 07:25:49 +0000 (03:25 -0400)]
media: wl128x: Fix some error handling in fm_v4l2_init_video_device()
X-Originating-IP: [10.175.113.25]
X-CFilter-Loop: Reflected
The fm_v4l2_init_video_device() forget to unregister v4l2/video device
in the error path, it could lead to UAF issue, eg,
BUG: KASAN: use-after-free in atomic64_read include/asm-generic/atomic-instrumented.h:836 [inline]
BUG: KASAN: use-after-free in atomic_long_read include/asm-generic/atomic-long.h:28 [inline]
BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0x92/0x690 kernel/locking/mutex.c:1206
Read of size 8 at addr ffff8881e84a7c70 by task v4l_id/3659
Arvind Yadav [Tue, 15 Aug 2017 11:23:42 +0000 (07:23 -0400)]
media: omap3isp: constify platform_device_id
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
media: staging: media: davinci_vpfe: use __func__ for function names
Checkpatch reported warnings for use of embedded function names.
Use __func__ instead of embedded function names.
[mchehab+samsung@kernel.org: rebased on the top of upstream] Signed-off-by: Diwakar Sharma <sharmalxmail@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sakari Ailus [Thu, 13 Jul 2017 15:23:44 +0000 (11:23 -0400)]
media: omap3isp: Don't rely on devm for memory resource management
devm functions are fine for managing resources that are directly related
to the device at hand and that have no other dependencies. However, a
process holding a file handle to a device created by a driver for a device
may result in the file handle left behind after the device is long gone.
This will result in accessing released (and potentially reallocated)
memory.
Instead, manage the memory resources in the driver. Releasing the
resources can be later on bound to e.g. by releasing a reference.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Arushi Singhal [Wed, 29 Mar 2017 15:13:20 +0000 (11:13 -0400)]
media: staging: media: davinci_vpfe: Replace a bit shift
This patch replaces bit shifting on 1 with the BIT(x) macro.
This was done with coccinelle:
@@
constant c;
@@
-1 << c
+BIT(c)
[mchehab+samsung@kernel.org: rebase on the top of upstream] Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Shailendra Verma [Fri, 25 Nov 2016 04:57:34 +0000 (23:57 -0500)]
media: staging: media: davinci_vpfe: - Fix for memory leak if decoder initialization fails.
Fix to avoid possible memory leak if the decoder initialization
got failed.Free the allocated memory for file handle object
before return in case decoder initialization fails.
Andrew F. Davis [Fri, 29 Mar 2019 17:34:27 +0000 (13:34 -0400)]
media: videobuf-dma-contig: Use size of buffer in mmap not vma size
The size of the vma can be larger than the size of the backing buffer.
Use the buffer size over vma size to prevent exposing extra memory
to userspace.
Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Young Xiao [Tue, 28 May 2019 12:38:13 +0000 (08:38 -0400)]
media: cx231xx-dvb: fix memory leak in dvb_fini()
In dvb_init(), dev->dvb is allocated by kzalloc.
Therefore, it must be freed being set to NULL.
Signed-off-by: Young Xiao <92siuyang@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Chen-Yu Tsai [Mon, 20 May 2019 15:06:36 +0000 (11:06 -0400)]
media: sun6i: Support A83T variant
The A83T SoC has a camera sensor interface (known as CSI in Allwinner
lingo), which is similar to the one found on the A64 and H3. The only
difference seems to be that support of MIPI CSI through a connected
MIPI CSI-2 bridge.
Add support for this variant.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Chen-Yu Tsai [Mon, 20 May 2019 15:06:35 +0000 (11:06 -0400)]
media: dt-bindings: media: sun6i-csi: Add compatible string for A83T variant
The A83T SoC has a camera sensor interface (known as CSI in Allwinner
lingo), which is similar to the one found on the A64 and H3. The only
difference seems to be that support of MIPI CSI through a connected
MIPI CSI-2 bridge.
Add a compatible string for this variant.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sakari Ailus [Mon, 18 Feb 2019 16:29:13 +0000 (11:29 -0500)]
media: staging: imgu: Address a compiler warning on alignment
Address a compiler warnings on alignment of struct ipu3_uapi_awb_fr_config_s
by adding __attribute__((aligned(32))) to a struct member of that type as
well.
Ezequiel Garcia [Tue, 28 May 2019 17:02:27 +0000 (13:02 -0400)]
media: rockchip/vpu: Add decoder boilerplate
This commit adds the needed boilerplate code to support the VPU
in decoding operation. Two v4l2 interfaces are exposed, one for
encoding and one for decoding, but a single m2m device is shared
by them, so jobs are properly serialized.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Boris Brezillon [Tue, 28 May 2019 17:02:26 +0000 (13:02 -0400)]
media: rockchip/vpu: Prepare things to support decoders
The code in rockchip_vpu_v4l2 was hardcoded for encoder support.
Modify it more generic to support the decoder case so that we can
re-use the same vb2/v4l2 ops for both devices.
Boris Brezillon [Tue, 28 May 2019 17:02:25 +0000 (13:02 -0400)]
media: rockchip/vpu: Provide a helper to reset both src and dst formats
When initializing a context, the core wants to reset both src and dst
formats. Right now the order doesn't matter, but if we want to have a
valid default width/height on the non-coded/raw format side (src in
case of encoders, dst in case of decoders), we need to reset those
formats in the right order: first the coded-format side, then the other,
such that width and height on the raw format side can be taken from
the coded format.
Let's provide a helper that will reset both formats and make sure this
is done in the right order.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Boris Brezillon [Tue, 28 May 2019 17:02:24 +0000 (13:02 -0400)]
media: rockchip/vpu: Move encoder logic to a common place
The V4L2/VB2 implementation for the encoder and decoder logic are very
similar, so let's rename rockchip_vpu_enc.c file into
rockchip_vpu_v4l2.c and remove the _enc_ part in objects/functions
exposed in rockchip_vpu_v4l2.h. We also rename the enc_queue_init()
function (in rockchip_vpu_drv.c) queue_init() since it will be used
to initialize both type of queues.
The implementation itself will be patched to support the decoding case
when decoder support is added.
Suggested-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Boris Brezillon [Tue, 28 May 2019 17:02:23 +0000 (13:02 -0400)]
media: rockchip/vpu: Rename rockchip_vpu_common.h into rockchip_vpu_v4l2.h
We're about to add prototypes for the vb2/v4l2 helpers shared by the
encoder/decoder logic in this file, so let's pick a name that reflects
that (rockchip_vpu_common.h was a bit to generic).
Suggested-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ezequiel Garcia [Tue, 28 May 2019 17:02:22 +0000 (13:02 -0400)]
media: rockchip/vpu: Support the Request API
Introduce support for the Request API. Although the JPEG encoder
does not mandate using the Request API, it's perfectly possible to
use it, if the application wants to.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ezequiel Garcia [Tue, 28 May 2019 17:02:21 +0000 (13:02 -0400)]
media: rockchip/vpu: Open-code media controller register
In preparation to support decoders, using a single memory-to-memory
device, we need to roll our own media controller entities registration.
To do that, we define a rockchip_vpu_func object that embeds the
video_device object plus all the elements that are needed to attach this
vdev to the media device.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Boris Brezillon [Tue, 28 May 2019 17:02:18 +0000 (13:02 -0400)]
media: v4l2-common: Add an helper to apply frmsize constraints
The rockchip VPU driver is open-coding this logic which seems pretty
generic. Let's provide an helper to apply the min/max and alignment
constraints on width/height.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix it by checking the return of proc_create_single() before
calling remove_proc_entry().
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use 0444 instead of S_IRUGO]
[hverkuil-cisco@xs4all.nl: use pr_info instead of KERN_INFO] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Wen Yang [Mon, 6 May 2019 07:05:17 +0000 (03:05 -0400)]
media: mtk-vcodec: fix leaked of_node references
The call to of_find_device_by_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:60:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function.
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:63:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function.
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:72:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Wen Yang [Mon, 6 May 2019 07:05:16 +0000 (03:05 -0400)]
media: mtk-vpu: fix leaked of_node references
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/media/platform/mtk-vpu/mtk_vpu.c:477:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 464, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sparse complains about two issues when building with i386
and COMPILE_TEST:
drivers/staging/media/allegro-dvt/allegro-core.c:1849:36: warning: constant 0xffffffff00000000UL is so big it is unsigned long long
drivers/staging/media/allegro-dvt/allegro-core.c:865:24: error: incompatible types in comparison expression (different type sizes)
Hans Verkuil [Wed, 29 May 2019 12:46:32 +0000 (08:46 -0400)]
media: allegro-dvt: fix build failure
nal-h264.h is a local header, not a global one. Use "" instead of <>.
Fixed this compile error:
CC drivers/staging/media/allegro-dvt/nal-h264.o
drivers/staging/media/allegro-dvt/nal-h264.c:24:10: fatal error: nal-h264.h: No such file or directory
#include <nal-h264.h>
^~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>