Wenjing Liu [Mon, 24 Feb 2020 22:19:02 +0000 (17:19 -0500)]
drm/amd/display: separate FEC capability from fec debug flag
[why]
FEC capability query should not be affected by debugging decision on
whether to disable FEC. We should not determine if display supports FEC
by checking debug option.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Thu, 27 Feb 2020 19:41:39 +0000 (14:41 -0500)]
drm/amd/display: writing stereo polarity register if swapped
[why]
on some displays that prefer swapped polarity we were seeing L/R images
swapped because OTG_STEREO_SYNC_OUTPUT_POLARITY would always be mapped
to 0
[how]
fix initial dal3 implementation to properly update the polarity field
according to the crtc_stereo_flags (same as
OTG_STEREO_EYE_FLAG_POLARITY)
Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Mon, 24 Feb 2020 15:13:37 +0000 (10:13 -0500)]
drm/amd/display: Stop if retimer is not available
Raven provides retimer feature support that requires i2c interaction in
order to make it work well, all settings required for this configuration
are loaded from the Atom bios which include the i2c address. If the
retimer feature is not available, we should abort the attempt to set
this feature, otherwise, it makes the following line return
I2C_CHANNEL_OPERATION_NO_RESPONSE:
i2c_success = i2c_write(pipe_ctx, slave_address, buffer, sizeof(buffer));
...
if (!i2c_success)
ASSERT(i2c_success);
This ends up causing problems with hotplugging HDMI displays on Raven,
and causes retimer settings to warn like so:
This commit reworks the way that we handle i2c write for retimer in the
way that we abort this configuration if the feature is not available in
the device. For debug sake, we kept a simple log message in case the
retimer is not available.
Wenjing Liu [Tue, 25 Feb 2020 19:23:01 +0000 (14:23 -0500)]
drm/amd/display: fix a minor HDCP logging error
[why]
In HDCP Uninitialzed State, a CPIRQ event would cause log output
internal policy error because the CPIRQ event is not recognized as
unexpected event.
[how]
CPIRQ is issued in HDCP uninitialized state is unexpected. We should
set unexpected event flag in event ctx.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Tue, 25 Feb 2020 21:37:32 +0000 (16:37 -0500)]
drm/amd/display: determine rx id list bytes to read based on device count
[why]
Some RX doesn't like us to read rx id list upto max rx id list size. As
discussed, we decided to read rx id list based on device count.
[how]
According to HDCP specs the actual size of rx id list is calculated as
rx id list size = 2+3+16+5*device_count. We will read 16 bytes at a
time until it reached or exceeded rx id list size.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nikola Cornij [Wed, 26 Feb 2020 19:53:54 +0000 (14:53 -0500)]
drm/amd/display: Program DSC during timing programming
[why]
Link or DIG BE can't be exposed to a higher stream bandwidth than they
can handle. When DSC is required to fit the stream into the link
bandwidth, DSC has to be programmed during timing programming to ensure
this. Without it, intermittent issues such as black screen after S3 or a
hot-plug can be seen.
[how]
Move DSC programming from enabling stream on link to timing setup.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Wed, 26 Feb 2020 19:25:29 +0000 (14:25 -0500)]
drm/amd/display: Not check wm and clk change flag in optimized bandwidth.
[Why]
System isn't able to enter S0i3 due to not send display count 0 to smu.
When dpms off, clk changed flag is cleared alreay, and it is checked
when doing optimized bandwidth, and update clocks is bypassed due to the
flag is unset.
[How]
Remove check flag incide the function since watermark values and clocks
values are checked during update to determine whether to perform it, no
need to check it again outside the function.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Mon, 24 Feb 2020 22:22:36 +0000 (17:22 -0500)]
drm/amd/display: determine is mst hdcp based on stream instead of sink signal
[why]
It is possible even if sink signal is MST but driver enables SST stream.
We should not determine if we should do MST authentication based on
sink's capability.
Instead we should determine whether to do MST authentication based on
what we have enabled in stream.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Mon, 24 Feb 2020 19:07:23 +0000 (14:07 -0500)]
drm/amd/display: update soc bb for nv14
[why]
nv14 previously inherited soc bb from generic dcn 2, did not match
watermark values according to memory team
[how]
add nv14 specific soc bb: copy nv2 generic that it was
using from before, but changed num channels to 8
Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Wed, 4 Mar 2020 20:57:23 +0000 (15:57 -0500)]
drm/amdkfd: Signal eviction fence on process destruction (v2)
Otherwise BOs may wait for the fence indefinitely and never be destroyed.
v2: Signal the fence right after destroying queues to avoid unnecessary
delaye-delete in kfd_process_wq_release
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: xinhui pan <xinhui.pan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 5 Mar 2020 13:17:47 +0000 (21:17 +0800)]
drm/amdgpu: disable clock/power gating for SRIOV
and disable MC resum in VCN2.0 as well
those are not concerned by VF driver
Singed-off-by: darlington Opara <darlington.opara@amd.com> Signed-off-by: Jinage Zhao <jiange.zhao@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 5 Mar 2020 13:14:27 +0000 (21:14 +0800)]
drm/amdgpu: cleanup ring/ib test for SRIOV vcn2.0 (v2)
support IB test on dec/enc ring
disable ring test on dec/enc ring (MMSCH limitation)
v2: squash in unused variable warning fix
Singed-off-by: darlington Opara <darlington.opara@amd.com> Signed-off-by: Jinage Zhao <jiange.zhao@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 5 Mar 2020 13:11:32 +0000 (21:11 +0800)]
drm/amdgpu: implement initialization part on VCN2.0 for SRIOV
something need to do for VCN2.0 enablement on SRIOV:
1)use one dec ring and one enc ring
2)allocate MM table for MMSCH usage
3)implement SRIOV version vcn_start which orgnize vcn programing
with patcket format and implement start mmsch for to run those
packet
4)doorbell is changed for SRIOV
Singed-off-by: darlington Opara <darlington.opara@amd.com> Signed-off-by: Jinage Zhao <jiange.zhao@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 5 Mar 2020 13:10:03 +0000 (21:10 +0800)]
drm/amdgpu: disable jpeg block for SRIOV
MMSCH doesn't support jpeg ring on SRIOV
Signed-off-by: Jinage Zhao <jiange.zhao@amd.com> Singed-off-by: darlington Opara <darlington.opara@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yong Zhao [Wed, 4 Mar 2020 20:29:35 +0000 (15:29 -0500)]
drm/amdkfd: Add more comments on GFX9 user CP queue MQD workaround
Because too many things are involved in this workaround, we need more
comments to avoid pitfalls.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yong Zhao [Fri, 6 Mar 2020 19:33:39 +0000 (14:33 -0500)]
drm/amdgpu: Use better names to reflect it is CP MQD buffer
Add "CP" to AMDGPU_GEM_CREATE_MQD_GFX9 to indicate it is only for CP MQD
buffer.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
During GU reset PSP's sysfs was being wrongly reinitilized
during call to amdgpu_device_ip_late_init which was failing
with duplicate error.
Fix:
Move psp_sysfs_init to psp_sw_init to avoid this. Add guards
in sysfs file's read and write hook agains premature call
if PSP is not finished initialization.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jacob He [Fri, 28 Feb 2020 12:24:41 +0000 (20:24 +0800)]
drm/amdgpu: Update SPM_VMID with the job's vmid when application reserves the vmid
SPM access the video memory according to SPM_VMID. It should be updated
with the job's vmid right before the job is scheduled. SPM_VMID is a
global resource
Signed-off-by: Jacob He <jacob.he@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Wed, 4 Mar 2020 13:50:01 +0000 (21:50 +0800)]
drm/amdgpu: toggle DF-Cstate when accessing UMC ras error related registers
On arcturus, DF-Cstate needs to be toggled off/on
before and after accessing UMC error counter and
error address registers, otherwise, clearing such
registers may fail.
Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: John Clements <John.Clements@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Fri, 21 Feb 2020 13:43:44 +0000 (21:43 +0800)]
drm/amdgpu: add helper funcs to detect PCS error
Since from vega20, hardware supports run-time detect
and report XGMI/WAFL PCS ras error. Add helper functions
to walkthrough every type of ras error and report it if
any.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Remove pointless NULL checks in dmub_psr_copy_settings
Clang warns:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:147:31: warning:
address of 'pipe_ctx->plane_res' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (!pipe_ctx || !&pipe_ctx->plane_res || !&pipe_ctx->stream_res)
~ ~~~~~~~~~~^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:147:56: warning:
address of 'pipe_ctx->stream_res' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (!pipe_ctx || !&pipe_ctx->plane_res || !&pipe_ctx->stream_res)
~ ~~~~~~~~~~^~~~~~~~~~
2 warnings generated.
As long as pipe_ctx is not NULL, the address of members in this struct
cannot be NULL, which means these checks will always evaluate to false.
Fixes: 4c1a1335dfe0 ("drm/amd/display: Driverside changes to support PSR in DMCUB") Link: https://github.com/ClangBuiltLinux/linux/issues/915 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Thu, 13 Feb 2020 15:50:13 +0000 (10:50 -0500)]
drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume from s3 (v2)
This interface is for dGPU Navi1x. Linux dc-pplib interface depends
on window driver dc implementation.
For Navi1x, clock settings of dcn watermarks are fixed. the settings
should be passed to smu during boot up and resume from s3.
boot up: dc calculate dcn watermark clock settings within dc_create,
dcn20_resource_construct, then call pplib functions below to pass
the settings to smu:
smu_set_watermarks_for_clock_ranges
smu_set_watermarks_table
navi10_set_watermarks_table
smu_write_watermarks_table
For Renoir, clock settings of dcn watermark are also fixed values.
dc has implemented different flow for window driver:
dc_hardware_init / dc_set_power_state
dcn10_init_hw
notify_wm_ranges
set_wm_ranges
For Linux
smu_set_watermarks_for_clock_ranges
renoir_set_watermarks_table
smu_write_watermarks_table
jianzh [Fri, 21 Feb 2020 06:28:12 +0000 (14:28 +0800)]
drm/amdgpu/sriov: Use VF-accessible register for gpu_clock_count
Navi12 VK CTS subtest timestamp.calibrated.dev_domain_test failed
because mmRLC_CAPTURE_GPU_CLOCK_COUNT register cannot be
written in VF due to security policy.
Solution: use a VF-accessible timestamp register pair
mmGOLDEN_TSC_COUNT_LOWER/UPPER for SRIOV case.
v2: according to Deucher Alexander's advice, switch to
mmGOLDEN_TSC_COUNT_LOWER/UPPER for both bare metal and SRIOV.
Signed-off-by: jianzh <Jiange.Zhao@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Mon, 2 Mar 2020 01:36:15 +0000 (09:36 +0800)]
drm/amd/powerplay: fix pre-check condition for setting clock range
This fix will handle some MP1 FW issue like as mclk dpm table in renoir has a reverse
dpm clock layout and a zero frequency dpm level as following case.
[How]
when we disable MST we should clear the cur link settings (lane_count=0 is
good enough). This will cause us to not reallocate payloads earlier than
expected and not throw the warning
Sung Lee [Fri, 21 Feb 2020 19:50:55 +0000 (14:50 -0500)]
drm/amd/display: Set clock optimization required after update clocks
[WHY]
We see an issue that caused clk_optimized_required to be set true in
certain cases, causing passive flips to fail. This is because of a typo
where wm_optimized_required was set twice.
[HOW]
Set clk_optimized_required to false after updating clocks.
Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Fri, 7 Feb 2020 19:47:58 +0000 (14:47 -0500)]
drm/amd/display: change number of cursor policy for dml calculation.
[Why]
vstartup calculation is incorrect due to use 2 number of cursors and
result in an underflow when playing video in full screen mode and
combines graphic plane and video plane.
[How]
Apply new policy for dml calculation.
1 cursor for graphic plane, 0 cursor for video plane.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Josip Pavic [Fri, 21 Feb 2020 17:26:19 +0000 (12:26 -0500)]
drm/amd/display: fix dcc swath size calculations on dcn1
[Why]
Swath sizes are being calculated incorrectly. The horizontal swath size
should be the product of block height, viewport width, and bytes per
element, but the calculation uses viewport height instead of width. The
vertical swath size is similarly incorrectly calculated. The effect of
this is that we report the wrong DCC caps.
[How]
Use viewport width in the horizontal swath size calculation and viewport
height in the vertical swath size calculation.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Thu, 20 Feb 2020 20:54:32 +0000 (15:54 -0500)]
drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions
[WHY]
SMU FW previously had an issue with lowering display clock to below 100
MHz, and a workaround was put in to limit it. Newest SMU FW does not
have this issue, and no longer needs the 100MHz cap.
[HOW]
Remove the 100MHz cap based on the SMU FW version.
Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Wed, 19 Feb 2020 00:15:55 +0000 (19:15 -0500)]
drm/amd/display: Workaround to do HDCP authentication twice on certain displays
[Why]
When transitioning from SST to MST, the HDCP repeater in some MST
displays will enter a bad state. The HDCP repeater is recovered after
failing and performing authentication again.
[How]
Add monitor patch to trigger HDCP authentication failure after
encryption is enabled and re-authenticate.
Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Tue, 18 Feb 2020 22:11:50 +0000 (17:11 -0500)]
drm/amd/display: fix image corruption with ODM 2:1 DSC 2 slice
[why]
When combining two or more pipes in DSC mode, there will always be more
than 1 slice per line. In this case, as per DSC rules, the sink device
is expecting that the ICH is reset at the end of each slice line (i.e.
ICH_RESET_AT_END_OF_LINE must be configured based on the number of
slices at the output of ODM). It is recommended that software set
ICH_RESET_AT_END_OF_LINE = 0xF for each DSC in the ODM combine. However
the current code only set ICH_RESET_AT_END_OF_LINE = 0xF when number of
slice per DSC engine is greater than 1 instead of number of slice per
output after ODM combine.
[how]
Add is_odm in dsc config. Set ICH_RESET_AT_END_OF_LINE = 0xF if either
is_odm or number of slice per DSC engine is greater than 1.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Tue, 11 Feb 2020 15:27:21 +0000 (10:27 -0500)]
drm/amd/display: program DPG_OFFSET_SEGMENT for odm_pipe
[why]
When test pattern is enabled with ODM combine, test pattern is generated
by piecing multiple DPGs image together. The current code will program
all DPGs with horizontal offset of 0. This will cause all DPGs to output
the beginning of the pattern. Instead each DPG should program a
horizontal offset of its x position to form a continous pattern when
pieced together.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Wed, 22 Jan 2020 16:55:48 +0000 (11:55 -0500)]
drm/amd/display: add vsc update support for test pattern request
[how]
Allow vsc info packet if vsc is supported. Update vsc based on test
pattern request. Remove dpg_is_blanked polling, apply hardware global
lock instead to ensure double buffered dpg is updated with vsc in one
frame
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 20 Feb 2020 15:04:54 +0000 (10:04 -0500)]
drm/amd/display: fix typo "to found" -> "to find"
[Why]
Typo in amdgpu_dm error message:
"Failed to found connector for link!"
[How]
1. Replace with:
"Failed to find connector for link!"
2. Fix indentation checkpatch warnings.
Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Thu, 20 Feb 2020 18:04:15 +0000 (13:04 -0500)]
drm/amd/display: Make clock table struct more accessible
[WHY & HOW]
In order to correctly intepret clock table, num_states is also needed.
This field did not get moved with clock_table but should next to it for
easier access/viewing.
Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joseph Gravenor [Fri, 14 Feb 2020 22:53:47 +0000 (17:53 -0500)]
drm/amd/display: add worst case dcc meta pitch to fake plane
[why]
When we have single channel memory, we can not light up 2 4k displays
with a 1080p edp, because we don't have enough bw by a small margin.
this small margin comes from dcc meta being too large. We however don't
have this dcc meta when we create fake planes so, before the flip we
will not filter out the mode for 2 4k displays with a 1080p edp
[how]
Change get_default_swizzle_mode to something more general so we don't
end up with a separate function for every missing field in the fake
plane. Add a reasonable dcc meta to the fake plane when it is filled in,
so we filter out modes that don't have enough bandwidth. To do this, we
take the screen width and align it to 1024(8k 60)
Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Tue, 11 Feb 2020 20:33:38 +0000 (15:33 -0500)]
drm/amd/display: only include FEC overhead if both asic and display support FEC
[why]
Some asics don't support FEC but FEC overhead is added into link
bandwidth calculation by mistake. This causes certain timing cannot be
validated.
[how]
Only include FEC overhead if both asic and display support FEC.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Isabel Zhang [Fri, 14 Feb 2020 21:32:35 +0000 (16:32 -0500)]
drm/amd/display: Move mod_hdcp_displays to mod_hdcp struct
[Why]
Reset connection is called before remove display in mod_hdcp. When
remove display is called, the display structure has been zeroed from
reset connection. Since no displays can be found, remove display does
not properly reset the hardware. This causes validation errors when
another display is plugged into a different port afterwards.
[How]
Moved displays structure out of connections structure. Displays
structure is now directly within mod_hdcp. Displays is no longer zeroed
when reset connection is called.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Thu, 13 Feb 2020 20:40:06 +0000 (15:40 -0500)]
drm/amd/display: Link training TPS1 workaround add back in dpcd
[Why]
Previously implemented early_cr_pattern we mistook dp_hw_link_settings
for a redundant call of dpcd_set_link_settings
[How]
revert the changes to dpcd_set_link_settings calls for this workaround.
Do not need to revert the entire change since it only affects patched
case
Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: David Galiffi <David.Galiffi@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 20 Feb 2020 05:35:02 +0000 (13:35 +0800)]
drm/amdgpu: stop using sratch_reg in IB test
scratch_reg0 is used by RLCG for register access usage
in SRIOV case.
both CP firmware and driver can invoke RLCG to do
certain register access (through scratch_reg0/1/2/3)
but rlcg now dosen't have race concern so if two
clients are in parallel doing the RLCG reg access
then we are colliding,
GFX IB test is a runtime work, so it is forbidden
to use scrach_reg0/1/2/3 during IB test period
note:
Although we can only have this change for SRIOV, but
looks it doesn't worth the effort to differentiate
bare-metal with SRIOV on the GFX ib test
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 20 Feb 2020 03:05:36 +0000 (11:05 +0800)]
drm/amdgpu: fix IB test MCBP bug
1)for gfx IB test we shouldn't insert DE meta data
2)we should make sure IB test finished before we
send event 3 to hypervisor otherwise the IDLE from
event 3 will preempt IB test, which is not designed
as a compatible structure for MCBP
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Fri, 28 Feb 2020 16:43:19 +0000 (13:43 -0300)]
drm/amd/display: dc_link: code clean up on detect_dp function
Removes codestyle issues on detect_dp function as suggested by
checkpatch.pl.
CHECK: Lines should not end with a '('
WARNING: Missing a blank line after declarations
WARNING: line over 80 characters
CHECK: Alignment should match open parenthesis
Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Fri, 28 Feb 2020 16:41:45 +0000 (13:41 -0300)]
drm/amd/display: dc_link: code clean up on enable_link_dp function
Coding style clean up on enable_link_dp function as suggested by
checkpatch.pl:
CHECK: Lines should not end with a '('
WARNING: line over 80 characters
WARNING: suspect code indent for conditional statements (8, 24)
CHECK: braces {} should be used on all arms of this statement
ERROR: else should follow close brace '}'
CHECK: Comparison to NULL could be written
"link->preferred_training_settings.fec_enable"
Dan Carpenter [Fri, 28 Feb 2020 10:58:33 +0000 (13:58 +0300)]
drm/amd/display: Fix dmub_psr_destroy()
This is freeing the wrong variable so it will crash. It should be
freeing "*dmub" instead of "dmub".
Fixes: 4c1a1335dfe0 ("drm/amd/display: Driverside changes to support PSR in DMCUB") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yintian Tao [Fri, 28 Feb 2020 06:24:42 +0000 (14:24 +0800)]
drm/amdgpu: clean wptr on wb when gpu recovery
The TDR will be randomly failed due to compute ring
test failure. If the compute ring wptr & 0x7ff(ring_buf_mask)
is 0x100 then after map mqd the compute ring rptr will be
synced with 0x100. And the ring test packet size is also 0x100.
Then after invocation of amdgpu_ring_commit, the cp will not
really handle the packet on the ring buffer because rptr is equal to wptr.
Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matt Coffin [Wed, 26 Feb 2020 23:16:14 +0000 (16:16 -0700)]
drm/amdgpu/smu: Add message sending lock
This adds a message lock to the smu_send_smc_msg* implementations to
protect against concurrent access to the mmu registers used to
communicate with the SMU
v2: Implement for smu_v12_0 as well
v3: Add mutex_init for message_lock
Signed-off-by: Matt Coffin <mcoffin13@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new interface reads the argument in the call to send the message, so
this is no longer needed, and shouldn't be used for concurrency safety
reasons.
Signed-off-by: Matt Coffin <mcoffin13@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matt Coffin [Wed, 26 Feb 2020 23:16:12 +0000 (16:16 -0700)]
drm/amdgpu/powerplay: Refactor SMU message handling for safety
Move the responsibility for reading argument registers into the
smu_send_smc_msg* implementations, so that adding a message-sending lock
to protect the SMU registers will result in the lock still being held
when the argument is read.
v2: transition smu_v12_0, it's asics, and vega20
Signed-off-by: Matt Coffin <mcoffin13@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Thu, 13 Feb 2020 15:42:25 +0000 (10:42 -0500)]
drm/amdgpu/powerplay: nv1x, renior copy dcn clock settings of watermark to smu during boot up
dc to pplib interface is changed for navi1x, renoir.
display_config_changed is not called by dc anymore.
smu_write_watermarks_table is not executed for navi1x, renoir
during boot up.
solution: call smu_write_watermarks_table just after dc pass
watermark clock settings to pplib
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: remove all debugfs cleanup/fini code at amdgpu
v3: squash in unused variable removal
Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jacob He [Thu, 27 Feb 2020 13:17:40 +0000 (21:17 +0800)]
drm/amdgpu: Initialize SPM_VMID with 0xf (v2)
SPM_VMID is a global resource, SPM access the video memory according to
SPM_VMID. The initial valude of SPM_VMID is 0 which is used by kernel.
That means UMD can overwrite the memory of VMID0 by enabling SPM, that
is really dangerous.
Initialize SPM_VMID with 0xf, it messes up other user mode process at
most.
v2: squash in indentation fix
Signed-off-by: Jacob He <jacob.he@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Thu, 27 Feb 2020 01:47:13 +0000 (09:47 +0800)]
drm/amdgpu/sriov: Use kiq to copy the gpu clock
For vega10 sriov, the register is blocked, use
copy data command to fix the issue.
v2: Rename amdgpu_kiq_read_clock to gfx_v9_0_kiq_read_clock.
Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Wed, 26 Feb 2020 19:13:51 +0000 (14:13 -0500)]
drm/amdkfd: change SDMA MQD memory type
SDMA MQD memory type is NC that causes MQD data overwritten
accidentally by an old stable cache line. Changing it to UC
default for GART will fix the issue.
The mqd_gfx9 parameter is meant for control stacks that are
allocated together with user mode queue MQDs. Setting
mqd_gfx9 to true maps the control stack pages as NC.
Here it was accidentally applied to SDMA MQDs,
which are allocated together with the HIQ MQD. Setting
the mqd_gfx9 to false avoids that.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Acked-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 28 Feb 2020 06:21:14 +0000 (16:21 +1000)]
Merge tag 'drm-misc-next-2020-02-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.7
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- bridge: huge rework to get rid of omap_dss custom display drivers
Driver Changes:
- hisilicon: some fixes related to modes it can deal with / default to
- virtio: shmem and gpu context fixes and enhancements
- sun4i: Support for LVDS on the A33
Gurchetan Singh [Thu, 27 Feb 2020 00:25:55 +0000 (16:25 -0800)]
drm/virtio: add virtio_gpu_is_shmem helper
The plan is use have both shmem and virtual "vram" running
side-by-side in virtio-gpu. It looks like we'll eventually use
struct drm_gem_object as a base class, and we'll need to convert
to shmem and vram objects on the fly. As a first step, add a
virtio_gpu_is_shmem helper. Thanks to kraxel for suggesting this
approach on Gitlab.
projects / mirror_ubuntu-kernels.git / log