]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
12 years agomemcg: fix mapcount check in move charge code for anonymous page
Naoya Horiguchi [Mon, 5 Mar 2012 22:59:20 +0000 (14:59 -0800)]
memcg: fix mapcount check in move charge code for anonymous page

Currently the charge on shared anonyous pages is supposed not to moved in
task migration.  To implement this, we need to check that mapcount > 1,
instread of > 2.  So this patch fixes it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomm: thp: fix BUG on mm->nr_ptes
Andrea Arcangeli [Mon, 5 Mar 2012 22:59:20 +0000 (14:59 -0800)]
mm: thp: fix BUG on mm->nr_ptes

Dave Jones reports a few Fedora users hitting the BUG_ON(mm->nr_ptes...)
in exit_mmap() recently.

Quoting Hugh's discovery and explanation of the SMP race condition:

  "mm->nr_ptes had unusual locking: down_read mmap_sem plus
   page_table_lock when incrementing, down_write mmap_sem (or mm_users
   0) when decrementing; whereas THP is careful to increment and
   decrement it under page_table_lock.

   Now most of those paths in THP also hold mmap_sem for read or write
   (with appropriate checks on mm_users), but two do not: when
   split_huge_page() is called by hwpoison_user_mappings(), and when
   called by add_to_swap().

   It's conceivable that the latter case is responsible for the
   exit_mmap() BUG_ON mm->nr_ptes that has been reported on Fedora."

The simplest way to fix it without having to alter the locking is to make
split_huge_page() a noop in nr_ptes terms, so by counting the preallocated
pagetables that exists for every mapped hugepage.  It was an arbitrary
choice not to count them and either way is not wrong or right, because
they are not used but they're still allocated.

Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: <stable@vger.kernel.org> [3.0.x, 3.1.x, 3.2.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoalpha: fix 32/64-bit bug in futex support
Andrew Morton [Mon, 5 Mar 2012 22:59:19 +0000 (14:59 -0800)]
alpha: fix 32/64-bit bug in futex support

Michael Cree said:

: : I have noticed some user space problems (pulseaudio crashes in pthread
: : code, glibc/nptl test suite failures, java compiler freezes on SMP alpha
: : systems) that arise when using a 2.6.39 or later kernel on Alpha.
: : Bisecting between 2.6.38 and 2.6.39 (using glibc/nptl test suite as
: : criterion for good/bad kernel) eventually leads to:
: :
: : 8d7718aa082aaf30a0b4989e1f04858952f941bc is the first bad commit
: : commit 8d7718aa082aaf30a0b4989e1f04858952f941bc
: : Author: Michel Lespinasse <walken@google.com>
: : Date:   Thu Mar 10 18:50:58 2011 -0800
: :
: :     futex: Sanitize futex ops argument types
: :
: :     Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic
: :     prototypes to use u32 types for the futex as this is the data type the
: :     futex core code uses all over the place.
: :
: : Looking at the commit I see there is a change of the uaddr argument in
: : the Alpha architecture specific code for futexes from int to u32, but I
: : don't see why this should cause a problem.

Richard Henderson said:

: futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
:                               u32 oldval, u32 newval)
: ...
:         :       "r"(uaddr), "r"((long)oldval), "r"(newval)
:
:
: There is no 32-bit compare instruction.  These are implemented by
: consistently extending the values to a 64-bit type.  Since the
: load instruction sign-extends, we want to sign-extend the other
: quantity as well (despite the fact it's logically unsigned).
:
: So:
:
: -        :       "r"(uaddr), "r"((long)oldval), "r"(newval)
: +        :       "r"(uaddr), "r"((long)(int)oldval), "r"(newval)
:
: should do the trick.

Michael said:

: This fixes the glibc test suite failures and the pulseaudio related
: crashes, but it does not fix the java compiiler lockups that I was (and
: are still) observing.  That is some other problem.

Reported-by: Michael Cree <mcree@orcon.net.nz>
Tested-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomemcg: fix GPF when cgroup removal races with last exit
Hugh Dickins [Mon, 5 Mar 2012 22:59:18 +0000 (14:59 -0800)]
memcg: fix GPF when cgroup removal races with last exit

When moving tasks from old memcg (with move_charge_at_immigrate on new
memcg), followed by removal of old memcg, hit General Protection Fault in
mem_cgroup_lru_del_list() (called from release_pages called from
free_pages_and_swap_cache from tlb_flush_mmu from tlb_finish_mmu from
exit_mmap from mmput from exit_mm from do_exit).

Somewhat reproducible, takes a few hours: the old struct mem_cgroup has
been freed and poisoned by SLAB_DEBUG, but mem_cgroup_lru_del_list() is
still trying to update its stats, and take page off lru before freeing.

A task, or a charge, or a page on lru: each secures a memcg against
removal.  In this case, the last task has been moved out of the old memcg,
and it is exiting: anonymous pages are uncharged one by one from the
memcg, as they are zapped from its pagetables, so the charge gets down to
0; but the pages themselves are queued in an mmu_gather for freeing.

Most of those pages will be on lru (and force_empty is careful to
lru_add_drain_all, to add pages from pagevec to lru first), but not
necessarily all: perhaps some have been isolated for page reclaim, perhaps
some isolated for other reasons.  So, force_empty may find no task, no
charge and no page on lru, and let the removal proceed.

There would still be no problem if these pages were immediately freed; but
typically (and the put_page_testzero protocol demands it) they have to be
added back to lru before they are found freeable, then removed from lru
and freed.  We don't see the issue when adding, because the
mem_cgroup_iter() loops keep their own reference to the memcg being
scanned; but when it comes to mem_cgroup_lru_del_list().

I believe this was not an issue in v3.2: there, PageCgroupAcctLRU and
PageCgroupUsed flags were used (like a trick with mirrors) to deflect view
of pc->mem_cgroup to the stable root_mem_cgroup when neither set.
38c5d72f3ebe ("memcg: simplify LRU handling by new rule") mercifully
removed those convolutions, but left this General Protection Fault.

But it's surprisingly easy to restore the old behaviour: just check
PageCgroupUsed in mem_cgroup_lru_add_list() (which decides on which lruvec
to add), and reset pc to root_mem_cgroup if page is uncharged.  A risky
change?  just going back to how it worked before; testing, and an audit of
uses of pc->mem_cgroup, show no problem.

And there's a nice bonus: with mem_cgroup_lru_add_list() itself making
sure that an uncharged page goes to root lru, mem_cgroup_reset_owner() no
longer has any purpose, and we can safely revert 4e5f01c2b9b9 ("memcg:
clear pc->mem_cgroup if necessary").

Calling update_page_reclaim_stat() after add_page_to_lru_list() in swap.c
is not strictly necessary: the lru_lock there, with RCU before memcg
structures are freed, makes mem_cgroup_get_reclaim_stat_from_page safe
without that; but it seems cleaner to rely on one dependency less.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agodebugobjects: Fix selftest for static warnings
Stephen Boyd [Mon, 5 Mar 2012 22:59:17 +0000 (14:59 -0800)]
debugobjects: Fix selftest for static warnings

debugobjects is now printing a warning when a fixup for a NOTAVAILABLE
object is run.  This causes the selftest to fail like:

ODEBUG: selftest warnings failed 4 != 5

We could just increase the number of warnings that the selftest is
expecting to see because that is actually what has changed.  But, it turns
out that fixup_activate() was written with inverted logic and thus a fixup
for a static object returned 1 indicating the object had been fixed, and 0
otherwise.  Fix the logic to be correct and update the counts to reflect
that nothing needed fixing for a static object.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agofloppy/scsi: fix setting of BIO flags
Muthu Kumar [Mon, 5 Mar 2012 22:59:16 +0000 (14:59 -0800)]
floppy/scsi: fix setting of BIO flags

Fix setting bio flags in drivers (sd_dif/floppy).

Signed-off-by: Muthukumar R <muthur@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomemcg: fix deadlock by inverting lrucare nesting
Hugh Dickins [Mon, 5 Mar 2012 22:59:16 +0000 (14:59 -0800)]
memcg: fix deadlock by inverting lrucare nesting

We have forgotten the rules of lock nesting: the irq-safe ones must be
taken inside the non-irq-safe ones, otherwise we are open to deadlock:

CPU0                          CPU1
----                          ----
lock(&(&pc->lock)->rlock);
                              local_irq_disable();
                              lock(&(&zone->lru_lock)->rlock);
                              lock(&(&pc->lock)->rlock);
<Interrupt>
lock(&(&zone->lru_lock)->rlock);

To check a different locking issue, I happened to add a spin_lock to
memcg's bit_spin_lock in lock_page_cgroup(), and lockdep very quickly
complained about __mem_cgroup_commit_charge_lrucare() (on CPU1 above).

So delete __mem_cgroup_commit_charge_lrucare(), passing a bool lrucare to
__mem_cgroup_commit_charge() instead, taking zone->lru_lock under
lock_page_cgroup() in the lrucare case.

The original was using spin_lock_irqsave, but we'd be in more trouble if
it were ever called at interrupt time: unconditional _irq is enough.  And
ClearPageLRU before del from lru, SetPageLRU before add to lru: no strong
reason, but that is the ordering used consistently elsewhere.

Fixes 36b62ad539498d00c2d280a151a ("memcg: simplify corner case handling
of LRU").

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agodrivers/rtc/rtc-r9701.c: fix crash in r9701_remove()
Anatolij Gustschin [Mon, 5 Mar 2012 22:59:16 +0000 (14:59 -0800)]
drivers/rtc/rtc-r9701.c: fix crash in r9701_remove()

If probing the RTC didn't succeed due to failed RTC register access, the
RTC device will be unregistered.  Then, when removing the module
r9701_remove() causes a kernel crash while trying to unregister a not
registered RTC device.  Fix this by doing RTC register access test before
RTC device registration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoc2port: class_create() returns an ERR_PTR
Dan Carpenter [Mon, 5 Mar 2012 22:59:15 +0000 (14:59 -0800)]
c2port: class_create() returns an ERR_PTR

class_create() doesn't return a NULL, it only returns ERR_PTRs.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agopps: class_create() returns an ERR_PTR, not NULL
Dan Carpenter [Mon, 5 Mar 2012 22:59:15 +0000 (14:59 -0800)]
pps: class_create() returns an ERR_PTR, not NULL

class_create() never returns NULLs only ERR_PTRs.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agohung_task: fix the broken rcu_lock_break() logic
Oleg Nesterov [Mon, 5 Mar 2012 22:59:14 +0000 (14:59 -0800)]
hung_task: fix the broken rcu_lock_break() logic

check_hung_uninterruptible_tasks()->rcu_lock_break() introduced by
"softlockup: check all tasks in hung_task" commit ce9dbe24 looks
absolutely wrong.

- rcu_lock_break() does put_task_struct(). If the task has exited
  it is not safe to even read its ->state, nothing protects this
  task_struct.

- The TASK_DEAD checks are wrong too. Contrary to the comment, we
  can't use it to check if the task was unhashed. It can be unhashed
  without TASK_DEAD, or it can be valid with TASK_DEAD.

  For example, an autoreaping task can do release_task(current)
  long before it sets TASK_DEAD in do_exit().

  Or, a zombie task can have ->state == TASK_DEAD but release_task()
  was not called, and in this case we must not break the loop.

Change this code to check pid_alive() instead, and do this before we drop
the reference to the task_struct.

Note: while_each_thread() under rcu_read_lock() is not really safe, it can
livelock.  This will be fixed later, but fortunately in this case the
"max_count" logic saves us anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mandeep Singh Baines <msb@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agovfork: kill PF_STARTING
Oleg Nesterov [Mon, 5 Mar 2012 22:59:14 +0000 (14:59 -0800)]
vfork: kill PF_STARTING

Previously it was (ab)used by utrace.  Then it was wrongly used by the
scheduler code.

Currently it is not used, kill it before it finds the new erroneous user.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agocoredump_wait: don't call complete_vfork_done()
Oleg Nesterov [Mon, 5 Mar 2012 22:59:13 +0000 (14:59 -0800)]
coredump_wait: don't call complete_vfork_done()

Now that CLONE_VFORK is killable, coredump_wait() no longer needs
complete_vfork_done().  zap_threads() should find and kill all tasks with
the same ->mm, this includes our parent if ->vfork_done is set.

mm_release() becomes the only caller, unexport complete_vfork_done().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agovfork: make it killable
Oleg Nesterov [Mon, 5 Mar 2012 22:59:13 +0000 (14:59 -0800)]
vfork: make it killable

Make vfork() killable.

Change do_fork(CLONE_VFORK) to do wait_for_completion_killable().  If it
fails we do not return to the user-mode and never touch the memory shared
with our child.

However, in this case we should clear child->vfork_done before return, we
use task_lock() in do_fork()->wait_for_vfork_done() and
complete_vfork_done() to serialize with each other.

Note: now that we use task_lock() we don't really need completion, we
could turn task->vfork_done into "task_struct *wake_up_me" but this needs
some complications.

NOTE: this and the next patches do not affect in-kernel users of
CLONE_VFORK, kernel threads run with all signals ignored including
SIGKILL/SIGSTOP.

However this is obviously the user-visible change.  Not only a fatal
signal can kill the vforking parent, a sub-thread can do execve or
exit_group() and kill the thread sleeping in vfork().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agovfork: introduce complete_vfork_done()
Oleg Nesterov [Mon, 5 Mar 2012 22:59:13 +0000 (14:59 -0800)]
vfork: introduce complete_vfork_done()

No functional changes.

Move the clear-and-complete-vfork_done code into the new trivial helper,
complete_vfork_done().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoaio: wake up waiters when freeing unused kiocbs
Jeff Moyer [Mon, 5 Mar 2012 22:59:12 +0000 (14:59 -0800)]
aio: wake up waiters when freeing unused kiocbs

Bart Van Assche reported a hung fio process when either hot-removing
storage or when interrupting the fio process itself.  The (pruned) call
trace for the latter looks like so:

  fio             D 0000000000000001     0  6849   6848 0x00000004
   ffff880092541b88 0000000000000046 ffff880000000000 ffff88012fa11dc0
   ffff88012404be70 ffff880092541fd8 ffff880092541fd8 ffff880092541fd8
   ffff880128b894d0 ffff88012404be70 ffff880092541b88 000000018106f24d
  Call Trace:
    schedule+0x3f/0x60
    io_schedule+0x8f/0xd0
    wait_for_all_aios+0xc0/0x100
    exit_aio+0x55/0xc0
    mmput+0x2d/0x110
    exit_mm+0x10d/0x130
    do_exit+0x671/0x860
    do_group_exit+0x44/0xb0
    get_signal_to_deliver+0x218/0x5a0
    do_signal+0x65/0x700
    do_notify_resume+0x65/0x80
    int_signal+0x12/0x17

The problem lies with the allocation batching code.  It will
opportunistically allocate kiocbs, and then trim back the list of iocbs
when there is not enough room in the completion ring to hold all of the
events.

In the case above, what happens is that the pruning back of events ends
up freeing up the last active request and the context is marked as dead,
so it is thus responsible for waking up waiters.  Unfortunately, the
code does not check for this condition, so we end up with a hung task.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Cc: <stable@kernel.org> [3.2.x only]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agokprobes: return proper error code from register_kprobe()
Prashanth Nageshappa [Mon, 5 Mar 2012 22:59:12 +0000 (14:59 -0800)]
kprobes: return proper error code from register_kprobe()

register_kprobe() aborts if the address of the new request falls in a
prohibited area (such as ftrace pouch, __kprobes annotated functions,
non-kernel text addresses, jump label text).  We however don't return the
right error on this abort, resulting in a silent failure - incorrect
adding/reporting of kprobes ('perf probe do_fork+18' or 'perf probe
mcount' for instance).

In V2 we are incorporating Masami Hiramatsu's  feedback.

This patch fixes it by returning -EINVAL upon failure.

While we are here, rename the label used for exit to be more appropriate.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Prashanth K Nageshappa <prashanth@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agokmsg_dump: don't run on non-error paths by default
Matthew Garrett [Mon, 5 Mar 2012 22:59:10 +0000 (14:59 -0800)]
kmsg_dump: don't run on non-error paths by default

Since commit 04c6862c055f ("kmsg_dump: add kmsg_dump() calls to the
reboot, halt, poweroff and emergency_restart paths"), kmsg_dump() gets
run on normal paths including poweroff and reboot.

This is less than ideal given pstore implementations that can only
represent single backtraces, since a reboot may overwrite a stored oops
before it's been picked up by userspace.  In addition, some pstore
backends may have low performance and provide a significant delay in
reboot as a result.

This patch adds a printk.always_kmsg_dump kernel parameter (which can also
be changed from userspace).  Without it, the code will only be run on
failure paths rather than on normal paths.  The option can be enabled in
environments where there's a desire to attempt to audit whether or not a
reboot was cleanly requested or not.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge tag 'mmc-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Mon, 5 Mar 2012 16:51:10 +0000 (08:51 -0800)]
Merge tag 'mmc-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

MMC fixes from Chris Ball for 3.3:
 - atmel-mci: oops fix against regression introduced in 3.2
 - core: power saving regression fix against 3.3-rc1
 - core: suspend/resume fix for UHS-I cards
 - esdhc-imx: MMC card regression fix against 3.0
 - mmci: oops fix for ARM systems with large (64k) pages
 - MAINTAINERS update for atmel-mci.

* tag 'mmc-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: core: Fixup suspend/resume issues for UHS-I cards
  mmc: mmci: reduce max_blk_count to avoid overflowing max_req_size
  mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5
  mmc: core: fix regression: set default clock gating delay to 0
  MAINTAINERS: hand over atmel-mci (sd/mmc interface)
  mmc: atmel-mci: don't use dma features when using DMA with no chan available

12 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Mon, 5 Mar 2012 16:48:24 +0000 (08:48 -0800)]
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull from Jiri Kosina:
 "Please pull to receive updates for HID layer.  Nikolai's patch is
  rather important and should still go in for 3.3, as it's a regression
  fix for commit b4b583d."

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-input: allow array fields out of range
  HID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboard

12 years agoHID: hid-input: allow array fields out of range
Nikolai Kondrashov [Fri, 2 Mar 2012 20:13:58 +0000 (22:13 +0200)]
HID: hid-input: allow array fields out of range

Allow array field values out of range as per HID 1.11 specification,
section 6.2.25:

Rather than returning a single bit for each button in the group, an
array returns an index in each field that corresponds to the pressed
button (like keyboard scan codes). An out-of range value in and array
field is considered no controls asserted.

Apparently, "and" above is a typo and should be "an".

This fixes at least Waltop tablet pen clicks - otherwise BTN_TOUCH is never
released.

The relevant part of Waltop tablet report descriptors is this:

0x09, 0x42,         /*          Usage (Tip Switch),         */
0x09, 0x44,         /*          Usage (Barrel Switch),      */
0x09, 0x46,         /*          Usage (Tablet Pick),        */
0x15, 0x01,         /*          Logical Minimum (1),        */
0x25, 0x03,         /*          Logical Maximum (3),        */
0x75, 0x04,         /*          Report Size (4),            */
0x95, 0x01,         /*          Report Count (1),           */
0x80,               /*          Input,                      */

This is a regression fix for commit b4b583d ("HID: be more strict when
ignoring out-of-range fields").

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Mon, 5 Mar 2012 01:10:06 +0000 (17:10 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

MFD fixes from Samuel Ortiz:
 "This is the pull request for the MFD fixes for 3.3.  We have a few
  NULL pointer dereferences fixes, an ACPI conflict check fix, and a
  couple of wm8994 fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Correct readability of WM8994 DC servo 4E register
  mfd: Initialize tps65912 irq platform data properly
  mfd: Fix ACPI conflict check
  mfd: Fix ab8500 error path bug
  mfd: Test for jack detection when deciding if wm8994 should suspend
  mfd: Initialize tps65910 irq platform data properly
  mfd: Fix possible s5m null pointer dereference
  mfd: wm8350 variable dereferenced before check

12 years agovfs: move dentry_cmp from <linux/dcache.h> to fs/dcache.c
Linus Torvalds [Sun, 4 Mar 2012 23:51:42 +0000 (15:51 -0800)]
vfs: move dentry_cmp from <linux/dcache.h> to fs/dcache.c

It's only used inside fs/dcache.c, and we're going to play games with it
for the word-at-a-time patches.  This time we really don't even want to
export it, because it really is an internal function to fs/dcache.c, and
has been since it was introduced.

Having it in that extremely hot header file (it's included in pretty
much everything, thanks to <linux/fs.h>) is a disaster for testing
different versions, and is utterly pointless.

We really should have some kind of header file diet thing, where we
figure out which parts of header files are really better off private and
only result in more expensive compiles.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agommc: core: Fixup suspend/resume issues for UHS-I cards
Ulf Hansson [Thu, 1 Mar 2012 12:18:05 +0000 (13:18 +0100)]
mmc: core: Fixup suspend/resume issues for UHS-I cards

Even if cards supports 1.8V I/O voltage those should anyway be
initialized at 3.3V I/O according to (e)MMC, SD and SDIO specs.
Some eMMC and embedded SDIO devices are able to be initialized
at 1.8V as well, but it is better to be safe.

Do note that initialization in this context means that the card
has been completely powered off, otherwise the card will remain
at the last I/O voltage level that were negotitiated.

Due to the above being taken care of the suspend/resume issues
for UHS-I SD-cards has been fixed.

Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
12 years agommc: mmci: reduce max_blk_count to avoid overflowing max_req_size
Will Deacon [Fri, 24 Feb 2012 11:25:21 +0000 (11:25 +0000)]
mmc: mmci: reduce max_blk_count to avoid overflowing max_req_size

On a system with large pages (64k in my case), the following BUG is
triggered in MMC core:

[    2.338023] BUG: failure at drivers/mmc/core/core.c:221/mmc_start_request()!
[    2.338102] Kernel panic - not syncing: BUG!
[    2.338155] Call trace:
[    2.338228] [<ffffffc00008635c>] dump_backtrace+0x0/0x120
[    2.338317] [<ffffffc0003365ec>] dump_stack+0x14/0x1c
[    2.338403] [<ffffffc000336990>] panic+0xbc/0x1f0
[    2.338498] [<ffffffc00027a494>] mmc_start_request+0x154/0x184
[    2.338600] [<ffffffc00027abdc>] mmc_start_req+0x110/0x140
[    2.338701] [<ffffffc00028604c>] mmc_blk_issue_rw_rq+0x7c/0x39c
[    2.338804] [<ffffffc00028652c>] mmc_blk_issue_rq+0x1c0/0x468
[    2.338905] [<ffffffc000287564>] mmc_queue_thread+0x68/0x118
[    2.338995] [<ffffffc0000bc308>] kthread+0x84/0x8c

This is because of a 64k request with a max_req_size of 64k-1 bytes.

The following patch fixes the problem by limiting the max_blk_count
such that max_blk_count * max_blk_size == max_req_size. I couldn't
pursuade the compiler to emit a shift instead of a div without encoding
the shift explicitly.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
12 years agommc: sdhci-esdhc-imx: fix for mmc cards on i.MX5
Sascha Hauer [Fri, 17 Feb 2012 10:51:49 +0000 (11:51 +0100)]
mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5

On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the
SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION
command. This works for SD cards. However, with MMC cards
the MMC_SET_BLOCK_COUNT command is used instead, but this
needs the same handling. Fix MMC cards by testing for the
MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53
board with a Transcend MMC+ card and eMMC.

The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this
is a regression for these boards introduced in 3.0; it should
go to 3.0/3.1/3.2-stable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
12 years agommc: core: fix regression: set default clock gating delay to 0
Guennadi Liakhovetski [Thu, 23 Feb 2012 10:22:29 +0000 (11:22 +0100)]
mmc: core: fix regression: set default clock gating delay to 0

A recent commit "mmc: core: Use delayed work in clock gating framework"
(597dd9d79cfbbb1) introduced a default 200ms delay before clock gating
actually takes place.  This means that every time an MMC interface
becomes idle it first stays on for 200ms before gating its clock. This
leads to increased power consumption and is therefore a clear regression.
This patch restores the original behaviour by setting the default delay
to 0. Users prioritising throughput over power efficiency can still
modify the delay via sysfs.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
12 years agoMAINTAINERS: hand over atmel-mci (sd/mmc interface)
Nicolas Ferre [Fri, 17 Feb 2012 14:40:18 +0000 (15:40 +0100)]
MAINTAINERS: hand over atmel-mci (sd/mmc interface)

Modify MAINTAINERS entry for Atmel SD/MMC drivers.
I hand the atmel-mci and at91_mci drivers over to Ludovic.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
12 years agoLinux 3.3-rc6
Linus Torvalds [Sun, 4 Mar 2012 01:08:09 +0000 (17:08 -0800)]
Linux 3.3-rc6

12 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi...
Linus Torvalds [Sun, 4 Mar 2012 00:42:30 +0000 (16:42 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

SCSI fixes from James Bottomley:
 "There's just a single fix in here: the osd max device number fix."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576

12 years agoMerge tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
Linus Torvalds [Sun, 4 Mar 2012 00:33:51 +0000 (16:33 -0800)]
Merge tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6

PARISC fixes from James Bottomley:
 "This is a set of build fixes to get the cross compiled architecture
  testbeds building again"

* tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit.
  [PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h
  [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional

12 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 3 Mar 2012 17:32:31 +0000 (09:32 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Sat, 3 Mar 2012 17:31:49 +0000 (09:31 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull from Herbert Xu:
  "This push fixes a bug in mv_cesa that causes all hash operations
   that supply data on a final operation to fail."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: mv_cesa - fix final callback not ignoring input data

12 years agovfs: export full_name_hash() function to modules
Linus Torvalds [Sat, 3 Mar 2012 03:40:57 +0000 (19:40 -0800)]
vfs: export full_name_hash() function to modules

Commit 5707c87f "vfs: uninline full_name_hash()" broke the modular
build, because it needs exporting now that it isn't inlined any more.

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Fri, 2 Mar 2012 23:21:48 +0000 (15:21 -0800)]
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

hhwmon fixes for 3.3-rc6 from Guenter Roeck:

These patches are necessary for correct operation and management of
F75387.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (f75375s) Catch some attempts to write to r/o registers
  hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable
  hwmon: (f75375s) Make pwm*_mode writable for the F75387
  hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387

12 years agoMerge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6
Linus Torvalds [Fri, 2 Mar 2012 23:21:15 +0000 (15:21 -0800)]
Merge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6

fbdev fixes for 3.3 from Florian Tobias Schandinat

It includes:
 - two fixes for OMAP HDMI
 - one fix to make new OMAP functions behave as they are supposed to
 - one Kconfig dependency fix
 - two fixes for viafb for modesetting on VX900 hardware

* tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6:
  OMAPDSS: APPLY: make ovl_enable/disable synchronous
  OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
  viafb: fix IGA1 modesetting on VX900
  viafb: select HW scaling on VX900 for IGA2
  OMAPDSS: HDMI: hot plug detect fix
  OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled

12 years agoMerge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Fri, 2 Mar 2012 23:20:41 +0000 (15:20 -0800)]
Merge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

sound fixes for 3.3-rc6 from Takashi Iwai

This contains again regression fixes for various HD-audio and ASoC
regarding SSI and dapm shutdown path.  In addition, a minor azt3328
fix and the correction of the new jack-notification strings in HD-audio.

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Kill hyphenated names
  ALSA: hda - Add a fake mute feature
  ALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs
  ALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3
  ALSA: hda/realtek - Fix resume of multiple input sources
  ASoC: i.MX SSI: Fix DSP_A format.
  ASoC: dapm: Check for bias level when powering down

12 years agovfs: split up name hashing in link_path_walk() into helper function
Linus Torvalds [Fri, 2 Mar 2012 22:49:24 +0000 (14:49 -0800)]
vfs: split up name hashing in link_path_walk() into helper function

The code in link_path_walk() that finds out the length and the hash of
the next path component is some of the hottest code in the kernel.  And
I have a version of it that does things at the full width of the CPU
wordsize at a time, but that means that we *really* want to split it up
into a separate helper function.

So this re-organizes the code a bit and splits the hashing part into a
helper function called "hash_name()".  It returns the length of the
pathname component, while at the same time computing and writing the
hash to the appropriate location.

The code generation is slightly changed by this patch, but generally for
the better - and the added abstraction actually makes the code easier to
read too.  And the new interface is well suited for replacing just the
"hash_name()" function with alternative implementations.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agovfs: clarify and clean up dentry_cmp()
Linus Torvalds [Fri, 2 Mar 2012 22:47:15 +0000 (14:47 -0800)]
vfs: clarify and clean up dentry_cmp()

It did some odd things for unclear reasons.  As this is one of the
functions that gets changed when doing word-at-a-time compares, this is
yet another of the "don't change any semantics, but clean things up so
that subsequent patches don't get obscured by the cleanups".

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agovfs: uninline full_name_hash()
Linus Torvalds [Fri, 2 Mar 2012 22:32:59 +0000 (14:32 -0800)]
vfs: uninline full_name_hash()

.. and also use it in lookup_one_len() rather than open-coding it.

There aren't any performance-critical users, so inlining it is silly.
But it wouldn't matter if it wasn't for the fact that the word-at-a-time
dentry name patches want to conditionally replace the function, and
uninlining it sets the stage for that.

So again, this is a preparatory patch that doesn't change any semantics,
and only prepares for a much cleaner and testable word-at-a-time dentry
name accessor patch.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agovfs: trivial __d_lookup_rcu() cleanups
Linus Torvalds [Fri, 2 Mar 2012 22:23:30 +0000 (14:23 -0800)]
vfs: trivial __d_lookup_rcu() cleanups

These don't change any semantics, but they clean up the code a bit and
mark some arguments appropriately 'const'.

They came up as I was doing the word-at-a-time dcache name accessor
code, and cleaning this up now allows me to send out a smaller relevant
interesting patch for the experimental stuff.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agommc: atmel-mci: don't use dma features when using DMA with no chan available
Ludovic Desroches [Thu, 9 Feb 2012 15:33:53 +0000 (16:33 +0100)]
mmc: atmel-mci: don't use dma features when using DMA with no chan available

Some callbacks are set too early -- i.e. we can have dma capabilities but
we can't get a dma channel. So wait to get the dma channel before setting
callbacks and change logs consequently.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
[Should be applied to 3.2-stable.]
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
12 years agohwmon: (f75375s) Catch some attempts to write to r/o registers
Nikolaus Schulz [Tue, 28 Feb 2012 21:15:54 +0000 (16:15 -0500)]
hwmon: (f75375s) Catch some attempts to write to r/o registers

It makes no sense to attempt to manually configure the fan in auto mode,
or set the duty cycle directly in closed loop mode.  The corresponding
registers are then read-only.  If the user tries it nonetheless, error out
with EINVAL instead of silently doing nothing.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
[guenter.roeck@ericsson.com: Minor formatting cleanup]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
12 years agohwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable
Nikolaus Schulz [Tue, 28 Feb 2012 21:15:53 +0000 (16:15 -0500)]
hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable

The F75387 supports automatic fan control using either PWM duty cycle or
RPM speed values.  Make the driver detect the latter mode, and expose the
different modes in sysfs as per pwm_enable, so that the user can switch
between them.

The interpretation of the pwm_enable attribute for the F75387 is adjusted
to be a superset of those values used for similar Fintek chips which do
not support automatic duty mode, with 2 mapping to automatic speed mode,
and moving automatic duty mode to the new value 4.

Toggling the duty mode via pwm_enable is currently denied for the F75387,
as the chip then simply reinterprets the fan configuration register values
according to the new mode, switching between RPM and PWM units, which
makes this a dangerous operation.

This patch introduces a new pwm mode into the driver. This is necessary
because the new mode (automatic pwm mode, 4) may already be enabled by the
BIOS, and the driver should not break existing functionality. This was seen
on at least one board.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
12 years agoMerge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent...
Linus Torvalds [Fri, 2 Mar 2012 19:38:43 +0000 (11:38 -0800)]
Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pulling latest branches from Ingo:

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  memblock: Fix size aligning of memblock_alloc_base_nid()

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf probe: Ensure offset provided is not greater than function length without DWARF info too
  perf tools: Ensure comm string is properly terminated
  perf probe: Ensure offset provided is not greater than function length
  perf evlist: Return first evsel for non-sample event on old kernel
  perf/hwbp: Fix a possible memory leak

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  CPU hotplug, cpusets, suspend: Don't touch cpusets during suspend/resume

12 years agoregset: Return -EFAULT, not -EIO, on host-side memory fault
H. Peter Anvin [Fri, 2 Mar 2012 18:43:49 +0000 (10:43 -0800)]
regset: Return -EFAULT, not -EIO, on host-side memory fault

There is only one error code to return for a bad user-space buffer
pointer passed to a system call in the same address space as the
system call is executed, and that is EFAULT.  Furthermore, the
low-level access routines, which catch most of the faults, return
EFAULT already.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@hack.frob.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoregset: Prevent null pointer reference on readonly regsets
H. Peter Anvin [Fri, 2 Mar 2012 18:43:48 +0000 (10:43 -0800)]
regset: Prevent null pointer reference on readonly regsets

The regset common infrastructure assumed that regsets would always
have .get and .set methods, but not necessarily .active methods.
Unfortunately people have since written regsets without .set methods.

Rather than putting in stub functions everywhere, handle regsets with
null .get or .set methods explicitly.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@hack.frob.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoperf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled
Joerg Roedel [Wed, 29 Feb 2012 13:57:32 +0000 (14:57 +0100)]
perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled

It turned out that a performance counter on AMD does not
count at all when the GO or HO bit is set in the control
register and SVM is disabled in EFER.

This patch works around this issue by masking out the HO bit
in the performance counter control register when SVM is not
enabled.

The GO bit is not touched because it is only set when the
user wants to count in guest-mode only. So when SVM is
disabled the counter should not run at all and the
not-counting is the intended behaviour.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Avi Kivity <avi@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: stable@vger.kernel.org # v3.2
Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
12 years agoALSA: hda - Kill hyphenated names
Takashi Iwai [Thu, 1 Mar 2012 17:14:41 +0000 (18:14 +0100)]
ALSA: hda - Kill hyphenated names

Kill hyphens from "Line-Out" name strings, as suggested by Mark Brown.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Fri, 2 Mar 2012 07:40:45 +0000 (08:40 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Various smaller perf/urgent fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
12 years agoMerge git://www.linux-watchdog.org/linux-watchdog
Linus Torvalds [Fri, 2 Mar 2012 02:27:43 +0000 (18:27 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog

Watchdog updates from Wim Van Sebroeck:

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: fix GETTIMEOUT ioctl in booke_wdt
  watchdog: update maintainers git entry
  watchdog: Fix typo in pnx4008_wdt.c
  watchdog: Fix typo in Kconfig
  watchdog: fix error in probe() of s3c2410_wdt (reset at booting)
  watchdog: hpwdt: clean up set_memory_x call for 32 bit

12 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Linus Torvalds [Fri, 2 Mar 2012 02:26:48 +0000 (18:26 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull from Mark Brown:
 "A simple, driver specific fix.  This device isn't widely used outside
  of Marvell reference boards most of which are probably used with their
  BSPs rather than with mainline so low risk."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: fix the ldo configure according to 88pm860x spec

12 years agoMerge branch 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6
Linus Torvalds [Fri, 2 Mar 2012 02:24:52 +0000 (18:24 -0800)]
Merge branch 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6

i2c bugfix from Wolfram Sang:
  "This patch fixes a wrong assumption in the mxs-i2c-driver about a
   command queue being done.  Without it, we have seen races when the
   bus was under load."

* 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6:
  i2c: mxs: only flag completion when queue is completely done

12 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 2 Mar 2012 02:23:43 +0000 (18:23 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

DRM fixes from Dave Airlie:
  intel: fixes for output regression on 965GM, an oops and a machine
  hang

  radeon: uninitialised var (that gcc didn't warn about for some reason)
  + a couple of correctness fixes.

  exynos: fixes for various things, drop some chunks of unused code.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv()
  drm/radeon: fix uninitialized variable
  drm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2)
  drm/i915: Remove use of the autoreported ringbuffer HEAD position
  drm/i915: Prevent a machine hang by checking crtc->active before loading lut
  drm/i915: fix operator precedence when enabling RC6p
  drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0
  drm/i915: fix mode set on load pipe. (v2)
  drm/exynos: exynos_drm.h header file fixes
  drm/exynos: added panel physical size.
  drm/exynos: added postclose to release resource.
  drm/exynos: removed exynos_drm_fbdev_recreate function.
  drm/exynos: fixed page flip issue.
  drm/exynos: added possible_clones setup function.
  drm/exynos: removed pageflip_event_list init code when closed.
  drm/exynos: changed priority of mixer layers.
  drm/exynos: Fix typo in exynos_mixer.c

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Fri, 2 Mar 2012 02:22:55 +0000 (18:22 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  [S390] memory hotplug: prevent memory zone interleave
  [S390] crash_dump: remove duplicate include
  [S390] KEYS: Enable the compat keyctl wrapper on s390x

12 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Thu, 1 Mar 2012 13:17:07 +0000 (14:17 +0100)]
Merge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

A small fix for the SSI driver and a fix for system shutdown with modern
devices.  Most of the modern devices will never get shut down normally
with a visible kernel log as the systems they're in tend not to shut
down often and when they do it's usually in form factors that don't have
a user visible console.

12 years agomemblock: Fix size aligning of memblock_alloc_base_nid()
Tejun Heo [Tue, 28 Feb 2012 20:56:21 +0000 (05:56 +0900)]
memblock: Fix size aligning of memblock_alloc_base_nid()

memblock allocator aligns @size to @align to reduce the amount
of fragmentation.  Commit:

 7bd0b0f0da ("memblock: Reimplement memblock allocation using reverse free area iterator")

Broke it by incorrectly relocating @size aligning to
memblock_find_in_range_node().  As the aligned size is not
propagated back to memblock_alloc_base_nid(), the actually
reserved size isn't aligned.

While this increases memory use for memblock reserved array,
this shouldn't cause any critical failure; however, it seems
that the size aligning was hiding a use-beyond-allocation bug in
sparc64 and losing the aligning causes boot failure.

The underlying problem is currently being debugged but this is a
proper fix in itself, it's already pretty late in -rc cycle for
boot failures and reverting the change for debugging isn't
difficult. Restore the size aligning moving it to
memblock_alloc_base_nid().

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120228205621.GC3252@dhcp-172-17-108-109.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <alpine.SOC.1.00.1202130942030.1488@math.ut.ee>

12 years agomfd: Correct readability of WM8994 DC servo 4E register
Mark Brown [Wed, 29 Feb 2012 15:37:59 +0000 (15:37 +0000)]
mfd: Correct readability of WM8994 DC servo 4E register

It should be marked as readable but wasn't, breaking DC servo operation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoMerge tag 'for-linus' of git://github.com/rustyrussell/linux
Linus Torvalds [Wed, 29 Feb 2012 23:14:33 +0000 (15:14 -0800)]
Merge tag 'for-linus' of git://github.com/rustyrussell/linux

Merge virtio pull request from Rusty Russell.

* tag 'for-linus' of git://github.com/rustyrussell/linux:
  virtio: balloon: leak / fill balloon across S4

12 years agovirtio: balloon: leak / fill balloon across S4
Amit Shah [Wed, 29 Feb 2012 12:12:51 +0000 (17:42 +0530)]
virtio: balloon: leak / fill balloon across S4

commit e562966dbaf49e7804097cd991e5d3a8934fc148 added support for S4 to
the balloon driver.  The freeze function did nothing to free the pages,
since reclaiming the pages from the host to immediately give them back
(if S4 was successful) seemed wasteful.  Also, if S4 wasn't successful,
the guest would have to re-fill the balloon.  On restore, the pages were
supposed to be marked freed and the free page counters were incremented
to reflect the balloon was totally deflated.

However, this wasn't done right.  The pages that were earlier taken away
from the guest during a balloon inflation operation were just shown as
used pages after a successful restore from S4.  Just a fancy way of
leaking lots of memory.

Instead of trying that, just leak the balloon on freeze and fill it on
restore/thaw paths.  This works properly now.  The optimisation to not
leak can be added later on after a bit of refactoring of the code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
12 years agoOMAPDSS: APPLY: make ovl_enable/disable synchronous
Tomi Valkeinen [Wed, 29 Feb 2012 08:48:22 +0000 (10:48 +0200)]
OMAPDSS: APPLY: make ovl_enable/disable synchronous

ovl->enable/disable are meant to be synchronous so that they can handle
the configuration of fifo sizes. The current kernel doesn't configure
fifo sizes yet, and so the code doesn't need to block to function (from
omapdss driver's perspective).

However, for the users of omapdss a non-blocking ovl->disable is
confusing, because they don't know when the memory area is not used
any more.

Furthermore, when the fifo size configuration is added in the next merge
window, the change from non-blocking to blocking could cause side
effects to the users of omapdss. So by making the functions block
already will keep them behaving in the same manner.

And, while not the main purpose of this patch, this will also remove the
compile warning:

drivers/video/omap2/dss/apply.c:350: warning:
'wait_pending_extra_info_updates' defined but not used

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
12 years agoOMAPDSS: panel-dvi: Add Kconfig dependency on I2C
Tomi Valkeinen [Wed, 29 Feb 2012 08:48:21 +0000 (10:48 +0200)]
OMAPDSS: panel-dvi: Add Kconfig dependency on I2C

panel-dvi uses i2c, but the Kconfig didn't have dependency on I2C. Add
it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
12 years agoperf probe: Ensure offset provided is not greater than function length without DWARF...
Prashanth Nageshappa [Tue, 28 Feb 2012 04:13:01 +0000 (09:43 +0530)]
perf probe: Ensure offset provided is not greater than function length without DWARF info too

The 'perf probe' command allows kprobe to be inserted at any offset from
a function start, which results in adding kprobes to unintended
location.  (example: perf probe do_fork+10000 is allowed even though
size of do_fork is ~904).

My previous patch https://lkml.org/lkml/2012/2/24/42 addressed the case
where DWARF info was available for the kernel. This patch fixes the
case where perf probe is used on a kernel without debuginfo available.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F4C544D.1010909@linux.vnet.ibm.com
Signed-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoperf tools: Ensure comm string is properly terminated
David Ahern [Fri, 24 Feb 2012 19:31:38 +0000 (12:31 -0700)]
perf tools: Ensure comm string is properly terminated

If threads in a multi-threaded process have names shorter than the main
thread the comm for the named threads is not properly terminated.

E.g., for the process 'namedthreads' where each thread is named noploop%d
where %d is the thread number:

Before:
    perf script -f comm,tid,ip,sym,dso
    noploop:4ads 21616  400a49 noploop (/tmp/namedthreads)
The 'ads' in the thread comm bleeds over from the process name.

After:
    perf script -f comm,tid,ip,sym,dso
       noploop:4 21616  400a49 noploop (/tmp/namedthreads)

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1330111898-68071-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoperf probe: Ensure offset provided is not greater than function length
Prashanth Nageshappa [Fri, 24 Feb 2012 07:41:39 +0000 (13:11 +0530)]
perf probe: Ensure offset provided is not greater than function length

The perf probe command allows kprobe to be inserted at any offset from a
function start, which results in adding kprobes to unintended location.

Example: perf probe do_fork+10000 is allowed even though size of do_fork
is ~904.

This patch will ensure probe addition fails when the offset specified is
greater than size of the function.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/4F473F33.4060409@linux.vnet.ibm.com
Signed-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoperf evlist: Return first evsel for non-sample event on old kernel
Namhyung Kim [Mon, 20 Feb 2012 01:47:26 +0000 (10:47 +0900)]
perf evlist: Return first evsel for non-sample event on old kernel

On old kernels that don't support sample_id_all feature,
perf_evlist__id2evsel() returns NULL for non-sampling events.

This breaks perf top when multiple events are given on command line. Fix
it by using first evsel in the evlist. This will also prevent getting
the same (potential) problem in such new tool/ old kernel combo.

Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329702447-25045-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoMerge tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Wed, 29 Feb 2012 19:24:39 +0000 (11:24 -0800)]
Merge tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Arnd Bergmann says:
 "Another set of arm-soc bug fixes on top of v3.3-rc5.  The few larger
  bits are all for devices that still need to get set up in board code.

  Only three platforms are in this set of fixes: omap2+, pxa and lpc32xx."

* tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  ARM: LPC32xx: serial.c: Fixed loop limit
  ARM: LPC32xx: serial.c: HW bug workaround
  ARM: LPC32xx: irq.c: Clear latched event
  ARM: LPC32xx: Fix interrupt controller init
  ARM: LPC32xx: Fix irq on GPI_28
  ARM: OMAP2: fix mailbox init code
  ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
  ARM: OMAP1: Fix out-of-bounds array access for Innovator
  OMAP3 EVM: remove out-of-bounds array access of gpio_leds
  ARM: OMAP: Fix build error when mmc_omap is built as module
  ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module
  pxa/hx4700: add platform device and I2C info for AK4641 codec
  arch/arm/mach-pxa/: included linux/gpio.h twice
  arch/arm/mach-mmp/: some files include some headers twice
  ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe
  ARM: pxa: fix including linux/gpio.h twice
  ARM: pxa: fix mixed declarations and code in sharpsl_pm
  ARM: pxa: fix wrong parsing gpio event on spitz
  ARM: OMAP2+: usb-host: fix compile warning
  ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback
  ...

12 years agoMerge tag 'for-3.3' of git://openrisc.net/jonas/linux
Linus Torvalds [Wed, 29 Feb 2012 18:23:45 +0000 (10:23 -0800)]
Merge tag 'for-3.3' of git://openrisc.net/jonas/linux

Build fixes for 3.3 from Jonas Bonn

* tag 'for-3.3' of git://openrisc.net/jonas/linux:
  openrisc: Fix up audit_syscall_[entry|exit]() usage
  openrisc: include export.h for EXPORT_SYMBOL

12 years agodrm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv()
Sebastian Biemueller [Wed, 29 Feb 2012 16:04:52 +0000 (11:04 -0500)]
drm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv()

The bo is removed from the list at the top of
radeon_vm_bo_rmv(), but then the list is used
in radeon_vm_bo_update_pte() to look up the vm.
remove the bo_list entry at the end of the
function instead.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoALSA: hda - Add a fake mute feature
Takashi Iwai [Mon, 27 Feb 2012 14:00:58 +0000 (15:00 +0100)]
ALSA: hda - Add a fake mute feature

Some codecs don't supply the mute amp-capabilities although the lowest
volume gives the mute.  It'd be handy if the parser provides the mute
mixers in such a case.

This patch adds an extension amp-cap bit (which is used only in the
driver) to represent the min volume = mute state.  Also modified the
amp cache code to support the fake mute feature when this bit is set
but the real mute bit is unset.

In addition, conexant cx5051 parser uses this new feature to implement
the missing mute controls.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42825

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agodrm/radeon: fix uninitialized variable
Christian König [Tue, 28 Feb 2012 22:19:20 +0000 (23:19 +0100)]
drm/radeon: fix uninitialized variable

Without this fix the driver randomly treats
textures as arrays and I'm really wondering
why gcc isn't complaining about it.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoMerge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-2.6...
Dave Airlie [Wed, 29 Feb 2012 09:54:24 +0000 (09:54 +0000)]
Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-2.6-samsung into HEAD

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-2.6-samsung:
  drm/exynos: exynos_drm.h header file fixes
  drm/exynos: added panel physical size.
  drm/exynos: added postclose to release resource.
  drm/exynos: removed exynos_drm_fbdev_recreate function.
  drm/exynos: fixed page flip issue.
  drm/exynos: added possible_clones setup function.
  drm/exynos: removed pageflip_event_list init code when closed.
  drm/exynos: changed priority of mixer layers.
  drm/exynos: Fix typo in exynos_mixer.c

12 years agodrm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2)
Alex Deucher [Tue, 28 Feb 2012 16:08:22 +0000 (11:08 -0500)]
drm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2)

Need to call ExternalEncoderControl to set up DDC before
trying to get an EDID for all DP bridge chips (including
DP to LVDS).

Also remove redundant encoder assignment.

V2: fix typo in commit message.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agowatchdog: fix GETTIMEOUT ioctl in booke_wdt
Dmitry Artamonow [Thu, 26 Jan 2012 19:24:30 +0000 (23:24 +0400)]
watchdog: fix GETTIMEOUT ioctl in booke_wdt

Commit dcfb748422 ([WATCHDOG] fix book E watchdog to take
WDIOC_SETTIMEOUT arg in seconds) fixed SETTIMEOUT ioctl
to use seconds as a parameter instead of some hardware-specific
"period", but missed to apply similar changes to GETTIMEOUT,
so it still returns "period" value. Let's fix it!
Also, while at it, make SETTIMEOUT ioctl return real timeout
value as it should do according to the documentation.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
12 years agoALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs
Takashi Iwai [Wed, 29 Feb 2012 08:41:17 +0000 (09:41 +0100)]
ALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs

A bug report with an old Sony laptop showed that we can't rely on BIOS
setting the pins of headphones but the driver should set always by
itself.

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoecryptfs: fix printk format warning for size_t
Randy Dunlap [Wed, 29 Feb 2012 00:31:12 +0000 (16:31 -0800)]
ecryptfs: fix printk format warning for size_t

Fix printk format warning (from Linus's suggestion):

on i386:
  fs/ecryptfs/miscdev.c:433:38: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int'

and on x86_64:
  fs/ecryptfs/miscdev.c:433:38: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'long unsigned int'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Dustin Kirkland <dustin.kirkland@gazzang.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agohwmon: (f75375s) Make pwm*_mode writable for the F75387
Nikolaus Schulz [Tue, 28 Feb 2012 21:15:52 +0000 (22:15 +0100)]
hwmon: (f75375s) Make pwm*_mode writable for the F75387

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
12 years agohwmon: (f75375s) Fix writes to the pwm* attribute for the F75387
Nikolaus Schulz [Tue, 28 Feb 2012 21:15:51 +0000 (22:15 +0100)]
hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387

For the F75387, the register holding the current PWM duty cycle value is
r/o; changing it requires writing to the fan expect register instead.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
[guenter.roeck@ericsson.com: Simplified function parameters]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes
Linus Torvalds [Tue, 28 Feb 2012 17:17:31 +0000 (09:17 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Read resource groups on mount
  GFS2: Ensure rindex is uptodate for fallocate
  GFS2: Read in rindex if necessary during unlink
  GFS2: Fix race between lru_list and glock ref count

12 years agoMerge tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 28 Feb 2012 17:15:31 +0000 (09:15 -0800)]
Merge tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

IOMMU fixes for Linux 3.3-rc5

All the fixes are for the OMAP IOMMU driver. The first patch is the
biggest one. It fixes the calls of the function omap_find_iovm_area() in
the omap-iommu-debug module which expects a 'struct device' parameter
since commit fabdbca instead of an omap_iommu handle. The
omap-iommu-debug code still passed the handle to the function which
caused a crash.

The second patch fixes a NULL pointer dereference in the OMAP code and
the third patch makes sure that the omap-iommu is initialized before the
omap-isp driver, which relies on the iommu. The last patch is only a
workaround until defered probing is implemented.

* tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  iommu/omap: fix NULL pointer dereference
  iommu/omap: fix erroneous omap-iommu-debug API calls

12 years agowatchdog: update maintainers git entry
Wim Van Sebroeck [Tue, 28 Feb 2012 16:11:05 +0000 (17:11 +0100)]
watchdog: update maintainers git entry

The git repository for watchdog device drivers moved.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
12 years agowatchdog: Fix typo in pnx4008_wdt.c
Masanari Iida [Fri, 10 Feb 2012 15:40:56 +0000 (00:40 +0900)]
watchdog: Fix typo in pnx4008_wdt.c

Correct spelling "resouce" to "resource" in
drivers/watchdog/pnx4008_wdt.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
12 years agowatchdog: Fix typo in Kconfig
Masanari Iida [Fri, 10 Feb 2012 15:42:16 +0000 (00:42 +0900)]
watchdog: Fix typo in Kconfig

Correct spelling "overidden" to "overridden" in
drivers/watchdog/Kconfig

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
12 years agowatchdog: fix error in probe() of s3c2410_wdt (reset at booting)
MyungJoo Ham [Fri, 13 Jan 2012 05:14:23 +0000 (14:14 +0900)]
watchdog: fix error in probe() of s3c2410_wdt (reset at booting)

Probe function of s3c2410 watchdog calls request_irq before initializing
required value (wdt_count). This incurs resetting watchdog counter value
and watchdog-reboot during booting up.

This patch addresses such an issue by calling request_irq later.

Error handling in probe function and calling oder in remove function are
also revised accordingly.

Reported-by: Chanwoo Park <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
12 years agowatchdog: hpwdt: clean up set_memory_x call for 32 bit
Maxim Uvarov [Mon, 16 Jan 2012 04:02:50 +0000 (20:02 -0800)]
watchdog: hpwdt: clean up set_memory_x call for 32 bit

1. address has to be page aligned.
2. set_memory_x uses page size argument, not size.
Bug causes with following commit:
commit da28179b4e90dda56912ee825c7eaa62fc103797
Author: Mingarelli, Thomas <Thomas.Mingarelli@hp.com>
Date:   Mon Nov 7 10:59:00 2011 +0100

     watchdog: hpwdt: Changes to handle NX secure bit in 32bit path

    commit e67d668e147c3b4fec638c9e0ace04319f5ceccd upstream.

    This patch makes use of the set_memory_x() kernel API in order
    to make necessary BIOS calls to source NMIs.

Signed-off-by: Maxim Uvarov <maxim.uvarov@oracle.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>
12 years ago[PARISC] don't unconditionally override CROSS_COMPILE for 64 bit.
James Bottomley [Mon, 27 Feb 2012 21:41:05 +0000 (21:41 +0000)]
[PARISC] don't unconditionally override CROSS_COMPILE for 64 bit.

The user may wish to set their own value (for real cross compiles).  Since the
top level Makefile initialises CROSS_COMPILE to empty by default, we must
check it for being empty (rather than for being defined) before we override.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years agoGFS2: Read resource groups on mount
Steven Whitehouse [Fri, 24 Feb 2012 15:09:14 +0000 (15:09 +0000)]
GFS2: Read resource groups on mount

This makes mount take slightly longer, but at the same time, the first
write to the filesystem will be faster too. It also means that if there
is a problem in the resource index, then we can refuse to mount rather
than having to try and report that when the first write occurs.

In addition, to avoid recursive locking, we hvae to take account of
instances when the rindex glock may already be held when we are
trying to update the rbtree of resource groups.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
12 years agoGFS2: Ensure rindex is uptodate for fallocate
Bob Peterson [Fri, 17 Feb 2012 14:15:52 +0000 (09:15 -0500)]
GFS2: Ensure rindex is uptodate for fallocate

This patch fixes a problem whereby gfs2_grow was failing and causing GFS2
to assert. The problem was that when GFS2's fallocate operation tried to
acquire an "allocation" it made sure the rindex was up to date, and if not,
it called gfs2_rindex_update. However, if the file being fallocated was
the rindex itself, it was already locked at that point. By calling
gfs2_rindex_update at an earlier point in time, we bring rindex up to date
and thereby avoid trying to lock it when the "allocation" is acquired.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
12 years agoGFS2: Read in rindex if necessary during unlink
Bob Peterson [Thu, 16 Feb 2012 16:31:04 +0000 (11:31 -0500)]
GFS2: Read in rindex if necessary during unlink

This patch fixes a problem whereby you were unable to delete
files until other file system operations were done (such as
statfs, touch, writes, etc.) that caused the rindex to be
read in.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
12 years agoGFS2: Fix race between lru_list and glock ref count
Steven Whitehouse [Mon, 16 Jan 2012 15:46:21 +0000 (15:46 +0000)]
GFS2: Fix race between lru_list and glock ref count

This patch fixes a narrow race window between the glock ref count
hitting zero and glocks being removed from the lru_list.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
12 years agoperf/hwbp: Fix a possible memory leak
Namhyung Kim [Tue, 28 Feb 2012 01:19:38 +0000 (10:19 +0900)]
perf/hwbp: Fix a possible memory leak

If kzalloc() for TYPE_DATA failed on a given cpu, previous chunk
of TYPE_INST will be leaked. Fix it.

Thanks to Peter Zijlstra for suggesting this better solution. It
should work as long as the initial value of the region is all
0's and that's the case of static (per-cpu) memory allocation.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1330391978-28070-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
12 years agocrypto: mv_cesa - fix final callback not ignoring input data
Phil Sutter [Mon, 27 Feb 2012 11:17:04 +0000 (12:17 +0100)]
crypto: mv_cesa - fix final callback not ignoring input data

Broken by commit 6ef84509f3d439ed2d43ea40080643efec37f54f for users
passing a request with non-zero 'nbytes' field, like e.g. testmgr.

Cc: <stable@kernel.org> # 3.0+
Signed-off-by: Phil Sutter <phil.sutter@viprinet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
12 years agoMerge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarn...
Dave Airlie [Tue, 28 Feb 2012 08:20:14 +0000 (08:20 +0000)]
Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel into HEAD

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel:
  drm/i915: Remove use of the autoreported ringbuffer HEAD position
  drm/i915: Prevent a machine hang by checking crtc->active before loading lut
  drm/i915: fix operator precedence when enabling RC6p
  drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0
  drm/i915: fix mode set on load pipe. (v2)

12 years agoMerge tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub...
Linus Torvalds [Mon, 27 Feb 2012 23:43:05 +0000 (15:43 -0800)]
Merge tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

While demoing ktest at ELC in 2012, it was embarrassing that the
make_min_config test failed to work because the snowball board I was
testing it against had a config that would not build.  But the
make_min_config only tested the testing part and ignored build failures.
The end result was a config file that would not boot.

This time, for real.

* tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix make_min_config test when build fails

12 years agoktest: Fix make_min_config test when build fails
Steven Rostedt [Mon, 27 Feb 2012 18:58:49 +0000 (13:58 -0500)]
ktest: Fix make_min_config test when build fails

The make_min_config does not take into account when the build fails,
resulting in a invalid MIN_CONFIG .config file. When the build fails,
it is ignored and the boot test is executed, using the previous built
kernel. The configs that should be tested are not tested and they may
be added or removed depending on the result of the last kernel that
succeeded to be built.

If the build fails, mark the current config as a failure and the
configs that were disabled may still be needed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
12 years agoMerge branch 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6 into fixes
Arnd Bergmann [Mon, 27 Feb 2012 17:44:06 +0000 (17:44 +0000)]
Merge branch 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6 into fixes

* 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6: (5 commits)
  ARM: LPC32xx: serial.c: Fixed loop limit
  ARM: LPC32xx: serial.c: HW bug workaround
  ARM: LPC32xx: irq.c: Clear latched event
  ARM: LPC32xx: Fix interrupt controller init
  ARM: LPC32xx: Fix irq on GPI_28

Update to Linux 3.3-rc5

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
12 years agodrm/i915: Remove use of the autoreported ringbuffer HEAD position
Chris Wilson [Wed, 8 Feb 2012 13:34:13 +0000 (13:34 +0000)]
drm/i915: Remove use of the autoreported ringbuffer HEAD position

This is a revert of 6aa56062eaba67adfb247cded244fd877329588d.

This was originally introduced to workaround reads of the ringbuffer
registers returning 0 on SandyBridge causing hangs due to ringbuffer
overflow. The root cause here was reads through the GT powerwell require
the forcewake dance, something we only learnt of later. Now it appears
that reading the reported head position from the HWS is returning
garbage, leading once again to hangs.

For example, on q35 the autoreported head reports:
  [  217.975608] head now 00010000, actual 00010000
  [  436.725613] head now 00200000, actual 00200000
  [  462.956033] head now 00210000, actual 00210010
  [  485.501409] head now 00400000, actual 00400020
  [  508.064280] head now 00410000, actual 00410000
  [  530.576078] head now 00600000, actual 00600020
  [  553.273489] head now 00610000, actual 00610018
which appears reasonably sane. In contrast, if we look at snb:
  [  141.970680] head now 00e10000, actual 00008238
  [  141.974062] head now 02734000, actual 000083c8
  [  141.974425] head now 00e10000, actual 00008488
  [  141.980374] head now 032b5000, actual 000088b8
  [  141.980885] head now 03271000, actual 00008950
  [  142.040628] head now 02101000, actual 00008b40
  [  142.180173] head now 02734000, actual 00009050
  [  142.181090] head now 00000000, actual 00000ae0
  [  142.183737] head now 02734000, actual 00009050

In addition, the automatic reporting of the head position is scheduled
to be defeatured in the future. It has no more utility, remove it.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45492
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
12 years agoHID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboard
Alan Stern [Mon, 27 Feb 2012 16:23:45 +0000 (11:23 -0500)]
HID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboard

This patch (as1531) adds a NOGET quirk for the Slim+ keyboard marketed
by AIREN.  This keyboard seems to have a lot of bugs; NOGET works
around only one of them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: okias <d.okias@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
12 years agoARM: LPC32xx: serial.c: Fixed loop limit
Roland Stigge [Mon, 27 Feb 2012 16:28:03 +0000 (17:28 +0100)]
ARM: LPC32xx: serial.c: Fixed loop limit

This patch fixes a wrong loop limit on UART init.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
12 years agoARM: LPC32xx: serial.c: HW bug workaround
Roland Stigge [Mon, 27 Feb 2012 16:28:02 +0000 (17:28 +0100)]
ARM: LPC32xx: serial.c: HW bug workaround

This patch fixes a HW bug by flushing RX FIFOs of the UARTs on init. It was
ported from NXP's git.lpclinux.com tree.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org