Huang Rui [Fri, 15 Jun 2018 21:05:48 +0000 (16:05 -0500)]
drm/amdgpu: move get_rev_id at first before load gpu_info firmware
Rev id is used for identifying Raven2 series of chips. So we would better to
initialize it at first.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 12 Sep 2018 18:51:25 +0000 (13:51 -0500)]
drm/amdgpu: use IP presence to free uvd and vce handles
Rather than checking the asic type, check whether the UVD
or VCE IP blocks exist. This way we don't have to update
the check with new asics that use VCN.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Mon, 20 Aug 2018 07:39:32 +0000 (15:39 +0800)]
drm/amdgpu: enable mmhub power gating
Remove some functions due to the design change.
All the mmhub power gating sequence is moved to
smu fw.Driver sends the message to enable mmhub
powergating.We can also skip the fw version check
since the old fw version is in a very early stage
and we don't use that fw for release.
Christian König [Mon, 10 Sep 2018 18:02:46 +0000 (20:02 +0200)]
drm/amdgpu: use a single linked list for amdgpu_vm_bo_base
Instead of the double linked list. Gets the size of amdgpu_vm_pt down to
64 bytes again.
We could even reduce it down to 32 bytes, but that would require some
rather extreme hacks.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 10 Sep 2018 14:07:57 +0000 (16:07 +0200)]
drm/amdgpu: remove amdgpu_bo_list_entry.robj (v2)
We can get that just by casting tv.bo.
v2: squash in kfd fix (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 12 Sep 2018 19:19:57 +0000 (21:19 +0200)]
drm/ttm: once more fix ttm_bo_bulk_move_lru_tail
While cutting the lists we sometimes accidentally added a list_head from
the stack to the LRUs, effectively corrupting the list.
Remove the list cutting and use explicit list manipulation instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested: Huang Rui <ray.huang@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix pflip IRQ status after gpu reset.
Problem:
After GPU reset pflip completion IRQ is disabled and hence
any subsequent mode set or plane update leads to hang.
Fix:
Unless acrtc->otg_inst is initialized to -1 during display
block initializtion then durng resume from GPU reset
amdgpu_irq_gpu_reset_resume_helper will override CRTC 0 pflip
IRQ value with whatever value was on every other unused CRTC because
dm_irq_state will do irq_source = dal_irq_type + acrtc->otg_inst
where acrtc->otg_inst will be 0 for every unused CRTC.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 7 Sep 2018 18:34:17 +0000 (20:34 +0200)]
drm/amdgpu: allow fragment processing for invalid PTEs
That should improve the PRT performance on Vega quite a bit.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 7 Sep 2018 12:21:15 +0000 (14:21 +0200)]
drm/amdgpu: use the maximum possible fragment size on Vega/Raven
The fragment size controls only the L1 on Vega/Raven and we now don't
have any extra overhead any more because of larger fragments.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 6 Sep 2018 15:13:06 +0000 (17:13 +0200)]
drm/amdgpu: meld together VM fragment and huge page handling
This optimizes the generating of PTEs by walking the hierarchy only once
for a range and making changes as necessary.
It allows for both huge (2MB) as well giant (1GB) pages to be used on
Vega and Raven.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 3 Sep 2018 12:34:51 +0000 (14:34 +0200)]
drm/amdgpu: use leaf iterator for filling PTs
Less overhead and is the starting point for further cleanups and
improvements.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sat, 8 Sep 2018 11:05:34 +0000 (13:05 +0200)]
drm/amdgpu: use the DFS iterator in amdgpu_vm_invalidate_pds v2
Less code and easier to maintain.
v2: rename the function as well
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 6 Sep 2018 13:35:13 +0000 (15:35 +0200)]
drm/amdgpu: use dfs iterator to free PDs/PTs
Allows us to free all PDs/PTs without recursion.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sat, 1 Sep 2018 10:03:37 +0000 (12:03 +0200)]
drm/amdgpu: use leaf iterator for allocating PD/PT
Less code and allows for easier error handling.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sat, 1 Sep 2018 08:36:48 +0000 (10:36 +0200)]
drm/amdgpu: add some VM PD/PT iterators v2
Both a leaf as well as dfs iterator to walk over all the PDs/PTs.
v2: update comments and fix for_each_amdgpu_vm_pt_dfs_safe
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Mon, 10 Sep 2018 16:53:25 +0000 (12:53 -0400)]
drm/amdgpu:Add error message when register failed to reach expected value
Add error message when register failed to reach expected value, It will
help discover potential issue.
Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: e498eb713604 ("drm/amd/display: Add support for hw_state logging via debugfs") CC: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Tue, 11 Sep 2018 17:49:49 +0000 (13:49 -0400)]
drm/amd: Add DM DMCU support
DMCU (Display Microcontroller Unit) is a GPU chip involved in
eDP features like Adaptive Backlight Modulation and Panel Self
Refresh.
DC is already fully equipped to initialize DMCU as long as the
firmware is loaded.
At the moment only the raven firmware is available.
A single .bin file is loaded by the kernel's loading mechanism
and split into two ucodes according to the header.
DMCU is optional, so if the firmware is not found, no error or
warning is raised.
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Tue, 11 Sep 2018 17:46:41 +0000 (13:46 -0400)]
drm/amd: Add PSP DMCU support
DMCU (Display Microcontroller Unit) is a GPU chip involved in
eDP features like Adaptive Backlight Modulation and Panel Self
Refresh.
PSP is already equipped to handle DMCU firmware loading, all
that is needed is to translate between the new DMCU ucode ID and
the equivalent psp_gfx_fw_type.
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Tue, 11 Sep 2018 17:41:01 +0000 (13:41 -0400)]
drm/amd: Add ucode DMCU support
DMCU (Display Microcontroller Unit) is a GPU chip involved in
eDP features like Adaptive Backlight Modulation and Panel Self
Refresh.
DMCU has two pieces of firmware: the ERAM and the interrupt
vectors, which must be loaded seperately.
To this end, the DMCU firmware has a custom header and parsing
logic similar to MEC, to extract the two ucodes from a single
struct firmware.
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Thu, 6 Sep 2018 03:51:23 +0000 (23:51 -0400)]
drm/amdgpu: Move fault hash table to amdgpu vm
In stead of share one fault hash table per device, make it
per vm. This can avoid inter-process lock issue when fault
hash table is full.
Change-Id: I5d1281b7c41eddc8e26113e010516557588d3708 Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Suggested-by: Christian Konig <Christian.Koenig@amd.com> Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian Konig <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 7 Sep 2018 12:27:05 +0000 (14:27 +0200)]
drm/amdgpu: try allocating VRAM as power of two
Try to allocate VRAM in power of two sizes and only fallback to vram
split sizes if that fails.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After GPU reset amdgpu_vm_clear_bo triggers VM flush
but job->vm_pd_addr is not set causing SDMA TO.
v2:
Per advise by Christian König avoid flushing VM for jobs where
job->vm_pd_addr wasn't explicitly set.
v3:
Shortcut vm_flush_needed early.
Fixes cbd5285 drm/amdgpu: move setting the GART addr into TTM. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 30 Aug 2018 13:55:54 +0000 (15:55 +0200)]
drm/amdgpu: add amdgpu_vm_update_func
Add helper to call the update function for both BO and shadow.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 30 Aug 2018 13:55:54 +0000 (15:55 +0200)]
drm/amdgpu: add amdgpu_vm_pt_parent helper
Add a function to get the parent of a PD/PT.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 10 Sep 2018 13:52:55 +0000 (15:52 +0200)]
drm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunk
Slowly leaking memory one page at a time :)
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Mon, 13 Aug 2018 18:04:11 +0000 (14:04 -0400)]
drm/amdkfd: Generate xGMI direct iolink
Generate xGMI iolink for upper level usage
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Mon, 13 Aug 2018 18:02:17 +0000 (14:02 -0400)]
drm/amdkfd: Add new iolink type defines
Update the iolink type defines according to the new thunk spec
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Fri, 6 Jul 2018 15:32:42 +0000 (11:32 -0400)]
drm/amdkfd: kfd expose the hive_id of the device through its node properties
Thunk will generate the XGMI topology information when necessary with the hive_id
for each specified device
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Fri, 6 Jul 2018 15:28:23 +0000 (11:28 -0400)]
drm/amdgpu: get_hive_id from amdgpu side (v2)
Retrieve hive_id from amdgpu device
v2: compile fix
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Fri, 6 Jul 2018 15:26:08 +0000 (11:26 -0400)]
drm/amd/include: Add get_hive_id interface in kfd2kgd
KFD need to get hive id from amdgpu to build up the XGMI topology
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Wed, 27 Jun 2018 21:25:53 +0000 (17:25 -0400)]
drm/amdgpu : Generate XGMI topology info from driver level
Driver will save an array of XGMI hive info, each hive will have a list of devices
that have the same hive ID.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Wed, 27 Jun 2018 21:24:46 +0000 (17:24 -0400)]
drm/amdgpu : Add psp function interfaces for XGMI support
Place holder for XGMI support
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 19 Jun 2018 21:11:56 +0000 (16:11 -0500)]
drm/amdgpu/gmc9: Adjust GART and AGP location with xgmi offset (v2)
On hives with xgmi enabled, the fb_location aperture is a size
which defines the total framebuffer size of all nodes in the
hive. Each GPU in the hive has the same view via the fb_location
aperture. GPU0 starts at offset (0 * segment size),
GPU1 starts at offset (1 * segment size), etc.
For access to local vram on each GPU, we need to take this offset into
account. This including on setting up GPUVM page table and GART table
v2: squash in "drm/amdgpu: Init correct fb region for none XGMI configuration"
Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Huang Rui <ray.huang@amd.com>
Alex Deucher [Tue, 19 Jun 2018 22:03:27 +0000 (17:03 -0500)]
drm/amdgpu/gmc9: add a new gfxhub 1.1 helper for xgmi
Used to populate the xgmi info on vega20.
v2: PF_MAX_REGION is val - 1 (Ray)
Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Slava Abramov <slava.abramov@amd.com>
Reviewed-by :Shaoyun liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by :Shaoyun liu <Shaoyun.liu@amd.com>
Shaoyun Liu [Tue, 7 Aug 2018 15:44:26 +0000 (11:44 -0400)]
drm/amd/include: update the bitfield define for PF_MAX_REGION
Correct the definition based on vega20 register spec
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Mon, 10 Sep 2018 09:51:31 +0000 (17:51 +0800)]
drm/amdgpu: move PSP init prior to IH in gpu reset
since we use PSP to program IH regs now
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Sep 2018 15:04:44 +0000 (17:04 +0200)]
drm/amdgpu: set bulk_moveable to false when a per VM is released
Otherwise we might run into a use after free during bulk move.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Fri, 7 Sep 2018 05:50:31 +0000 (13:50 +0800)]
drm/amdgpu: Fix SDMA hang in prt mode v2
Fix SDMA hang in prt mode, clear XNACK_WATERMARK in reg SDMA0_UTCL1_WATERMK to avoid the issue
Affected ASICs: VEGA10 VEGA12 RV1 RV2
v2: add reg clear for SDMA1
Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Tested-by: Yukun Li <yukun1.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 5 Sep 2018 02:03:13 +0000 (10:03 +0800)]
drm/amd/powerplay: fix compile warning for wrong data type V2
do_div expects the 1st argument in 64bit instead of 32bit.
Drop the usage of do_div as it seems unnecessary.
V2: drop usage of do_div completely
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Thu, 6 Sep 2018 00:19:54 +0000 (20:19 -0400)]
drm/amdgpu: Fix compute VM BO params after rebase v2
The intent of two commits was lost in the last rebase:
810955b drm/amdgpu: Fix acquiring VM on large-BAR systems b5d21aa drm/amdgpu: Don't use shadow BO for compute context
This commit restores the original behaviour:
* Don't set AMDGPU_GEM_CREATE_NO_CPU_ACCESS for page directories
to allow them to be reused for compute VMs
* Don't create shadow BOs for page tables in compute VMs
v2: move more logic into amdgpu_vm_bo_param
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Kent Russell <Kent.Russell@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 27 Aug 2018 16:23:11 +0000 (18:23 +0200)]
drm/amdgpu: enable AGP aperture for GMC9 v2
Enable the old AGP aperture to avoid GART mappings.
v2: don't enable it for SRIOV
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Fri, 31 Aug 2018 20:54:12 +0000 (16:54 -0400)]
drm/amdgpu: Clean up KFD init and fini
Only initialize KFD once by moving amdgpu_amdkfd_init from
amdgpu_pci_probe to amdgpu_init. This fixes kernel oopses and hangs
when booting multi-GPU systems.
Also removed some vestiges of KFD being its own module.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Wed, 22 Aug 2018 21:00:34 +0000 (17:00 -0400)]
drm/amd/display: Add invariant support instrumentation in driver
Existing debug dump are all invariant, new “low 32-bit of address”
dump is not invariant
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Fri, 17 Aug 2018 18:24:26 +0000 (14:24 -0400)]
drm/amd/display: Remove call to amdgpu_pm_compute_clocks
[Why]
The extraneous call to amdgpu_pm_compute_clocks is deprecated.
[How]
Remove it.
Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Fri, 24 Aug 2018 20:54:14 +0000 (16:54 -0400)]
drm/amd/display: use link type to decide stream enc acquisition
[Why]
Virtual sink is used when set mode happens on a disconnected display
to allow the mode set to proceed. This did not work with MST because
the logic for acquiring stream encoder uses stream signal to determine
the special handling is required, and stream signal is virtual instead
of DP in this case.
[How]
Use link type to decide instead.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Thu, 9 Aug 2018 14:05:10 +0000 (10:05 -0400)]
drm/amd/display: Reorder resource_pool to put i2c with aux
[Why]
The i2c and aux engines are similar, and should be placed
next to eachother for readability
[How]
Reorder the elements of the resource_pool struct
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Li [Thu, 23 Aug 2018 19:28:08 +0000 (15:28 -0400)]
drm/amd/display: Use DRM helper for best_encoder
[Why]
Our implementation is functionally identical to DRM's
Note that instead of checking if the provided id is 0, the helper
follows through with the mode object search. However, It will still
return NULL, since 0 is not a valid object id, and missed searches
will return NULL.
[How]
Remove our implementation, and replace it with
drm_atomic_helper_best_encoder.
Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Tue, 21 Aug 2018 13:35:47 +0000 (09:35 -0400)]
drm/amd/display: num of sw i2c/aux engines less than num of connectors
[why]
AMD Stoney reference board, there are only 2 pipes (not include
underlay), and 3 connectors. resource creation, only
2 I2C/AUX engines are created. Within dc_link_aux_transfer, when
pin_data_en =2, refer to enengines[ddc_pin->pin_data->en] = NULL.
NULL point is referred later causing system crash.
[how]
each asic design has fixed number of ddc engines at hw side.
for each ddc engine, create its i2x/aux engine at sw side.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Mon, 13 Aug 2018 19:11:44 +0000 (15:11 -0400)]
drm/amd/display: Add driver-side parsing for CM
Although 4 unique register values exist for gamma modes, two are
actually the same (the two RAMs) It’s not possible for caller to
understand this HW specific behavior, so some parsing is necessary
in driver
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gary Kattan [Mon, 20 Aug 2018 22:12:14 +0000 (15:12 -0700)]
drm/amd/display: Fix DAL217 tests modify DTN logs for other tests
[Why]Update Code to get DTN golden log check to pass for tests run after
DAL217 tests.
[How]Change how dcn10_log_hw_state function prints HW state info
(CM_GAMUT_REMAP_Cx_Cx registers) when GAMUT REMAP is in bypass mode.
Signed-off-by: Gary Kattan <gary.kattan@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Build stream update and plane updates in dm
[Why]
We currently lock modeset by setting a boolean in dm. We want to lock
Based on what DC tells us.
[How]
Build stream_updates and plane_update based on what changed. Then we
call check_update_surfaces_for_stream() to get the update type
We lock only if update_type is not fast
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 29 Aug 2018 12:52:50 +0000 (14:52 +0200)]
drm/amdgpu: manually map the shadow BOs again
Otherwise we won't be able to use the AGP aperture.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 27 Aug 2018 16:19:48 +0000 (18:19 +0200)]
drm/amdgpu: use the AGP aperture for system memory access v2
Start to use the old AGP aperture for system memory access.
v2: Move that to amdgpu_ttm_alloc_gart
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 24 Aug 2018 10:08:06 +0000 (12:08 +0200)]
drm/amdgpu: add amdgpu_gmc_agp_location v3
Helper to figure out the location of the AGP BAR.
v2: fix a couple of bugs
v3: correctly add one to vram_end
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: sign extending turned out easier than thought.
v3: clean up the defines and move them into amdgpu_gmc.h as well
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 30 Aug 2018 08:27:15 +0000 (10:27 +0200)]
drm/amdgpu: improve VM state machine documentation v2
Since we have a lot of FAQ on the VM state machine try to improve the
documentation by adding functions for each state move.
v2: fix typo in amdgpu_vm_bo_invalidated, use amdgpu_vm_bo_relocated in
one more place as well.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 3 Sep 2018 08:51:51 +0000 (10:51 +0200)]
drm/amdgpu: fix amdgpu_mn_unlock() in the CS error path
Avoid unlocking a lock we never locked.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sat, 1 Sep 2018 11:25:31 +0000 (13:25 +0200)]
drm/amdgpu: separate per VM BOs from normal in the moved state
Allows us to avoid taking the spinlock in more places.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 30 Aug 2018 08:31:52 +0000 (10:31 +0200)]
drm/amdgpu: move size calculations to the front of the file again
amdgpu_vm_bo_* functions should come much later.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 30 Aug 2018 04:38:45 +0000 (12:38 +0800)]
drm/amd/powerplay: correct data type to support under voltage
For under voltage, negative value will be applied to voltage
offset. Update the data type to cover this case.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 29 Aug 2018 06:38:50 +0000 (14:38 +0800)]
drm/amd/powerplay: added vega20 overdrive support V3
Added vega20 overdrive support based on existing OD sysfs
APIs. However, the OD logics are simplified on vega20. So,
the behavior will be a little different and works only on
some limited levels.
V2: fix typo
fix commit description
revise error logs
add support for clock OD
V3: separate clock from voltage OD settings
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / mirror_ubuntu-kernels.git / log