Michal Wajdeczko [Mon, 19 Mar 2018 12:50:49 +0000 (12:50 +0000)]
drm/i915/guc: Handle GuC log flush event in dedicated function
We already try to keep all GuC log related code in separate file,
handling flush event should be placed there too. This will also
allow future code reuse.
v2: rebased
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180319125049.48932-1-michal.wajdeczko@intel.com
Michal Wajdeczko [Tue, 20 Mar 2018 18:14:19 +0000 (18:14 +0000)]
drm/i915/guc: Move enable/disable msg functions to GuC header
While today we are modifying GuC enabled msg mask only in GuC
log, this code should be defined as generic GuC to allow future
code reuse.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180320181419.35576-3-michal.wajdeczko@intel.com
Michal Wajdeczko [Tue, 20 Mar 2018 18:14:17 +0000 (18:14 +0000)]
drm/i915/guc: Unify naming of private GuC action functions
We should avoid using guc_log prefix for functions that don't
operate on GuC log, but rather request action from the GuC.
Better to use guc_action prefix.
Kelvin Gardiner [Tue, 20 Mar 2018 19:45:21 +0000 (12:45 -0700)]
drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection
This patch adds support to detect ICL, slice, subslice and EU fuse
settings.
Add addresses for ICL 11 slice, subslice and EU fuses registers.
These register addresses are the same as previous platforms but the
format and / or the meaning of the information is different. Therefore
Gen11 defines for these registers are added.
Bspec: 9731
Bspec: 20643
Bspec: 20673
v2: Update fusing information storage after introducing the new query
uAPI (Lionel)
v3 (Oscar):
- The maximum number of slices in ICL 11 is 1
- The subslice disable fuse can potentially store information in
all bits
- GEN_MAX_SUBSLICES has to be increased to 8
- Don't trust the slice enabled fuse outside the max number of
expected slices
- Indentation fix and some reordering and renaming of local
variables
v4: Use single space after Cc tag
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Kelvin Gardiner <kelvin.gardiner@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1521575121-9577-1-git-send-email-oscar.mateo@intel.com
Chris Wilson [Tue, 20 Mar 2018 10:04:49 +0000 (10:04 +0000)]
drm/i915: Add control flags to i915_handle_error()
Not all callers want the GPU error to handled in the same way, so expose
a control parameter. In the first instance, some callers do not want the
heavyweight error capture so add a bit to request the state to be
captured and saved.
v2: Pass msg down to i915_reset/i915_reset_engine so that we include the
reason for the reset in the dev_notice(), superseding the earlier option
to not print that notice.
v3: Stash the reason inside the i915->gpu_error to handover to the direct
reset from the blocking waiter.
Chris Wilson [Tue, 20 Mar 2018 10:04:48 +0000 (10:04 +0000)]
drm/i915: Specify which engines to reset following semaphore/event lockups
If the GPU is stuck waiting for an event or for a semaphore, we need to
reset the GPU in order to recover. We have to tell the reset routine
which engines we want reset, but we were still using the old interface
and declaring it as "not-fatal".
Fixes: 14b730fcb8d9 ("drm/i915/tdr: Prepare error handler to accept mask of hung engines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk
Michał Winiarski [Tue, 20 Mar 2018 11:55:17 +0000 (12:55 +0100)]
drm/i915/guc: Don't try to enable GuC logging when we're not using GuC
When changing the default values for guc_log_level, we accidentally left
the log enabled on non-guc platforms. Let's fix that.
v2: Define the levels used and remove (now obsolete) comments (Chris)
v3: Use "IS" rather than "TO" for booleans (Chris)
Fixes: 9605d1ce7c6b ("drm/i915/guc: Default to non-verbose GuC logging") Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180320115517.20423-1-michal.winiarski@intel.com
Oscar Mateo [Fri, 16 Mar 2018 12:14:49 +0000 (14:14 +0200)]
drm/i915/icl: Check for fused-off VDBOX and VEBOX instances
In Gen11, the Video Decode engines (aka VDBOX, aka VCS, aka BSD) and the
Video Enhancement engines (aka VEBOX, aka VECS) could be fused off. Also,
each VDBOX and VEBOX has its own power well, which only exist if the
related engine exists in the HW.
Unfortunately, we have a Catch-22 situation going on: we need the blitter
forcewake to read the register with the fuse info, but we cannot initialize
the forcewake domains without knowin about the engines present in the HW.
We workaround this problem by allowing the initialization of all forcewake
domains and then pruning the fused off ones, as per the fuse information.
Bspec: 20680
v2: We were shifting incorrectly for vebox disable (Vinay)
v3: Assert mmio is ready and warn if we have attempted to initialize
forcewake for fused-off engines (Paulo)
v4:
- Use INTEL_GEN in new code (Tvrtko)
- Shorter local variable (Tvrtko, Michal)
- Keep "if (!...) continue" style (Tvrtko)
- No unnecessary BUG_ON (Tvrtko)
- WARN_ON and cleanup if wrong mask (Tvrtko, Michal)
- Use I915_READ_FW (Michal)
- Use I915_MAX_VCS/VECS macros (Michal)
v5: Rebased by Rodrigo fixing conflicts on top of:
"drm/i915: Simplify intel_engines_init"
v6: Fix v5. Remove info->num_rings. (by Oscar)
v7: Rebase (Rodrigo).
v8:
- s/intel_device_info_fused_off_engines/
intel_device_info_init_mmio (Chris)
- Make vdbox_disable & vebox_disable local variables (Chris)
v9:
- Move function declaration to intel_device_info.h (Michal)
- Missing indent in bit fields definitions (Michal)
- When RC6 is enabled by BIOS, the fuse register cannot be read until
the blitter powerwell is awake. Shuffle where the fuse is read, prune
the forcewake domains after the fact and change the commit message
accordingly (Vinay, Sagar, Chris).
v10:
- Improved commit message (Sagar)
- New line in header file (Sagar)
- Specify the message in fw_domain_reset applies to ICL+ (Sagar)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180316121456.11577-1-mika.kuoppala@linux.intel.com
[Mika: soothe checkpatch on commit msg] Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Chris Wilson [Fri, 16 Mar 2018 21:49:59 +0000 (21:49 +0000)]
drm/i915: Trim error mask to known engines
For the convenience of userspace passing in an arbitrary reset mask,
remove unknown engines from the set of engines that are to be reset.
This means that we always follow a per-engine reset with a full-device
reset when userspace writes -1 into debugfs/i915_wedged.
Chris Wilson [Mon, 19 Mar 2018 12:35:28 +0000 (12:35 +0000)]
drm/i915: Prefer memset64() when filling the iomap
As the ringbuffer may exist inside stolen memory, our access to it may
be via the GTT iomap. This implies we may only have WC access for which
the conventional memset() substitution of rep stos performs very badly,
so switch to the rep mov[dq] variants when available.
Michał Winiarski [Mon, 19 Mar 2018 09:53:47 +0000 (10:53 +0100)]
drm/i915/guc: Demote GuC error messages
We're using those functions in selftests, and the callers are expected
to do the error handling anyways. Let's demote all GuC actions and
doorbell creation to DEBUG_DRIVER.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180319095348.9716-12-michal.winiarski@intel.com
Michał Winiarski [Mon, 19 Mar 2018 09:53:46 +0000 (10:53 +0100)]
drm/i915/guc: Default to non-verbose GuC logging
Now that we've decoupled logging from relay, GuC log level is only
controlling the GuC behavior - there shouldn't be any impact on i915
behaviour. We're only going to see a single extra interrupt when log
will get half full.
That, and the fact that we're seeing igt/gem_exec_nop/basic-series
failing with non-verbose logging being disabled.
v2: Bring back the "auto" guc_log_level, now that we fixed the log
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180319095348.9716-11-michal.winiarski@intel.com
Michał Winiarski [Mon, 19 Mar 2018 09:53:45 +0000 (10:53 +0100)]
drm/i915/guc: Allow user to control default GuC logging
While both naming and actual log enable logic in GuC interface are
confusing, we can simply expose the default log as yet another log
level.
GuC logic aside, from i915 point of view we now have the following GuC
log levels:
0 Log disabled
1 Non-verbose log
2-5 Verbose log
v2: Adjust naming after rebase.
v3: Fixed the log_level logic error introduced on rebase.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180319095348.9716-10-michal.winiarski@intel.com
Michał Winiarski [Mon, 19 Mar 2018 09:53:44 +0000 (10:53 +0100)]
drm/i915/guc: Don't print out relay statistics when relay is disabled
If nobody has enabled the relay, we're not comunicating with GuC, which
means that the stats don't have any meaning. Let's also remove interrupt
counter and tidy the debugfs formatting.
v2: Correct stats accounting (Sagar)
v3: Corrected one more error in stats accounting, move relay_enabled (Sagar)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180319095348.9716-9-michal.winiarski@intel.com
Michał Winiarski [Mon, 19 Mar 2018 09:53:41 +0000 (10:53 +0100)]
drm/i915/guc: Move check for fast memcpy_wc to relay creation
We only need those fast memcpy_wc when we're using relay to read
continuous GuC log. Let's prevent the user from creating a relay if we
know we won't be able to keep up with GuC.
v2: Adjust the return value (Michał)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180319095348.9716-6-michal.winiarski@intel.com
Michał Winiarski [Mon, 19 Mar 2018 09:53:40 +0000 (10:53 +0100)]
drm/i915/guc: Split relay control and GuC log level
Those two concepts are really separate. Since GuC is writing data into
its own buffer and we even provide a way for userspace to read directly
from it using i915_guc_log_dump debugfs, there's no real reason to tie
log level with relay creation.
Let's create a separate debugfs, giving userspace a way to create a
relay on demand, when it wants to read a continuous log rather than a
snapshot.
v2: Don't touch guc_log_level on relay creation error, adjust locking
after rebase, s/dev_priv/i915, pass guc to file->private_data (Sagar)
Use struct_mutex rather than runtime.lock for set_log_level
v3: Tidy ordering of definitions (Sagar)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180319095348.9716-5-michal.winiarski@intel.com
Michał Winiarski [Mon, 19 Mar 2018 09:53:39 +0000 (10:53 +0100)]
drm/i915/guc: Flush directly in log unregister
Having both guc_flush_logs and guc_log_flush functions is confusing.
While we could just rename things, guc_flush_logs implementation is
quite simple. Let's get rid of it and move its content to unregister.
v2: s/dev_priv/i915 (Sagar)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180319095348.9716-4-michal.winiarski@intel.com
Michał Winiarski [Mon, 19 Mar 2018 09:53:38 +0000 (10:53 +0100)]
drm/i915/guc: Merge log relay file and channel creation
We have all the information we need at relay_open call time.
Since there's no reason to split the process into relay_open and
relay_late_setup_files, let's remove the extra code.
v2: Remove obsoleted comments (Sagar)
v3: There was one obsolete comment left (Sagar)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180319095348.9716-3-michal.winiarski@intel.com
Michał Winiarski [Mon, 19 Mar 2018 09:53:37 +0000 (10:53 +0100)]
drm/i915/guc: Log runtime should consist of both mapping and relay
Currently, we're treating relay and mapping of GuC log as a separate
concepts. We're also using inconsistent locking, sometimes using
relay_lock, sometimes using struct mutex.
Let's correct that. Anything touching the runtime is now serialized
using runtime.lock, while we're still using struct mutex as inner lock
for mapping.
We're still racy in setting the log level - but we'll take care of that
in the following patches.
Michał Winiarski [Mon, 19 Mar 2018 09:53:36 +0000 (10:53 +0100)]
drm/i915/guc: Keep GuC interrupts enabled when using GuC
The GuC log contains a separate space used for crash dump.
We even get a separate notification for it. While we're not handling
crash differently yet, it makes sense to decouple the two right now to
simplify the following patches.
v2: Move guc_log_flush_irq_disable up to avoid movement in following
patches (Sagar).
v3: s/guc_log_flush_irq_*/guc_flush_log_msg_*, rebase after mass rename
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v2) Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180319095348.9716-1-michal.winiarski@intel.com
drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
If bios sets up an MST output and hardware state readout code sees this is
an SST configuration, when disabling the encoder we end up calling
->post_disable_dp() hook instead of the MST version. Consequently, we write
to the DP_SET_POWER dpcd to set it D3 state. Further along when we try
enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up
the MST hub. This results in continuous link training failures which keep
the system busy delaying boot. We could identify bios MST boot discrepancy
and handle it accordingly but a simple way to solve this is to write to the
DP_SET_POWER dpcd for MST too.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: 5ea2355a100a ("drm/i915/mst: Use MST sideband message transactions for dpms control") Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com
Ville Syrjälä [Fri, 2 Mar 2018 09:56:56 +0000 (11:56 +0200)]
drm/i915: Kill the remaining CHV HBR2 leftovers
AFAIK CHV was supposed to have HBR2 originally, but in the end the feature
was dropped. We still have some code leftovers from those early days.
Eliminate them.
The extra bit for the training pattern seems to be dead in the hardware.
I can set it (in fact I can set almost any reserved bit in the
registers) but it doesn't seem to interfere with the operation of the
hardware. Either that or I'm very lucky that my displays complete link
training with the incorrect pattern being sent out.
Chris Wilson [Mon, 12 Mar 2018 16:52:06 +0000 (16:52 +0000)]
drm/i915/stolen: Deduce base of reserved portion as top-size on vlv
On Valleyview, the HW deduces the base of the reserved portion of stolen
memory as being (top - size) and the address field within
GEN6_STOLEN_RESERVED is set to 0. Add yet another GEN6_STOLEN_RESERVED
reader to cope with the subtly different path required for vlv.
v2: Avoid using reserved_base = reserved_size = 0 as the invalid
condition as that typically falls outside of the stolen region,
provoking a consistency error.
Chris Wilson [Mon, 12 Mar 2018 16:52:05 +0000 (16:52 +0000)]
drm/i915/stolen: Checkpatch cleansing
In the next patch, we will introduce a new vlv_get_stolen_reserved, so
before we do, make sure checkpatch is happy with the surrounding code.
Sneak in some debug output while we are here.
Chris Wilson [Mon, 12 Mar 2018 16:52:04 +0000 (16:52 +0000)]
drm/i915/stolen: Switch from DEBUG_KMS to DEBUG_DRIVER
i915_gem_stolen is an allocator for the reserved portion of memory
("stolen" from the system by the BIOS). It is not tied to KMS but
central to the driver, so prefer DRM_DEBUG_DRIVER.
Chris Wilson [Thu, 15 Mar 2018 15:10:15 +0000 (15:10 +0000)]
drm/i915: Stop engines when declaring the machine wedged
If we fail to reset the GPU, we declare the machine wedged. However, the
GPU may well still be running in the background with an in-flight
request. So despite our efforts in cleaning up the request queue and
faking the breadcrumb in the HWSP, the GPU may eventually write the
in-flght seqno there breaking all of our assumptions and throwing the
driver into a deep turmoil, wedging beyond wedged.
To avoid this we ideally want to reset the GPU. Since that has already
failed, make sure the rings have the stop bit set instead. This is part
of the normal GPU reset sequence, but that is actually disabled by
igt/gem_eio to force the wedged state. If we assume the worst, we must
poke at the bit again before we give up.
v2: Move the intel_gpu_reset() from set-wedged in the reset error path
into i915_gem_set_wedged() itself. Even if the reset fails (e.g. if it is
disabled by gem_eio), it still tries to make sure the engines are
stopped. For i915_gem_set_wedged() callers from outside of i915_reset(),
this should make sure the GPU is disabled while the driver is marked as
being wedged.
Testcase: igt/gem_eio Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180315151015.22741-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 15 Mar 2018 13:14:50 +0000 (13:14 +0000)]
drm/i915: Trace GEM steps between submit and wedging
We still have an odd race with wedging/unwedging as shown by igt/gem_eio
that defies expectations. Add some more trace_printks to try and
visualize the flow over the precipice.
Michal Wajdeczko [Thu, 15 Mar 2018 15:28:47 +0000 (15:28 +0000)]
drm/i915/guc: Fix build break on config without DEBUG_FS
In commit 56b9a8b08387 ("drm/i915/guc: Update syntax of GuC
log functions") we accidentally removed debugfs.h header
where needed stub functions were defined.
Reported-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Mike Lothian <mike@fireburn.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180315152848.40476-1-michal.wajdeczko@intel.com
Michal Wajdeczko [Wed, 14 Mar 2018 14:45:39 +0000 (14:45 +0000)]
drm/i915/guc: Update syntax of GuC log functions
We moved GuC log related data and code to separate files and
definition but we didn't change functions syntax to follow
object-verb pattern. Let's fix that before we continue with
next round of code refactoring.
v2: rebased
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180314144539.11152-1-michal.wajdeczko@intel.com
[ickle: checkpatch booleans] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The only usage outside the intel_lrc.c file is in the ringbuffer
init, but the irq mask calculated there is then overwritten for
all engines that have a non-zero shift, so we can drop it.
This change is not aimed at code saving but at removing from
intel_engines information that does not apply to all gens that have
the engine. When checking without the temporary WARN_ON, code size
is basically unchanged.
v2: make the irq_shifts array static const
v3: rebase, move irq_shifts array to logical_ring_default_irqs
v4: move array inside the if and use u8 for it (Chris)
The mmio bases we're currently storing in the intel_engines array are
only valid for a subset of gens, so we need to ignore them and use
different values in some cases. Instead of doing that, we can have a
table of [starting gen, mmio base] pairs for each engine in
intel_engines and select the correct one based on the gen we're running
on in a consistent way.
v2: document that the list goes in reverse order, update starting gen
for render (Chris)
v3: starting gen for render back to 1 to make our life easier with
selftests (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v2 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180314182653.26981-1-daniele.ceraolospurio@intel.com
Mahesh Kumar [Wed, 14 Mar 2018 08:06:52 +0000 (13:36 +0530)]
drm/i915/cnl; Add macro to get PORT_TX register
This patch creates a new macro to get PORT_TX register for any given DW.
This removes the need of defining register address for each port & DW.
Changes since V1:
- Use underscope prefix, as macro isn't returning an mmio reg(Lucas)
- Merge patch 1 & 2 of the series
Changes since V2:
- remove _MMIO_PORT6_LN macro (Rodrigo)
Tvrtko Ursulin [Wed, 14 Mar 2018 08:05:35 +0000 (08:05 +0000)]
drm/i915/pmu: Work around compiler warnings on some kernel configs
Arnd Bergman reports:
"""
The conditional spinlock confuses gcc into thinking the 'flags' value
might contain uninitialized data:
drivers/gpu/drm/i915/i915_pmu.c: In function '__i915_pmu_event_read':
arch/x86/include/asm/paravirt_types.h:573:3: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized]
The code is correct, but it's easy to see how the compiler gets confused
here. This avoids the problem by pulling the lock outside of the function
into its only caller.
"""
On deeper look it seems this is caused by paravirt spinlocks
implementation when CONFIG_PARAVIRT_DEBUG is set, which by being
complicated, manages to convince gcc locked parameter can be changed
externally (impossible).
Work around it by removing the conditional locking parameters altogether.
(It was never the most elegant code anyway.)
Slight penalty we now pay is an additional irqsave spin lock/unlock cycle
on the event enable path. But since enable is not a fast path, that is
preferrable to the alternative solution which was doing MMIO under irqsave
spinlock.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Fixes: 1fe699e30113 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180314080535.17490-1-tvrtko.ursulin@linux.intel.com
Chris Wilson [Wed, 14 Mar 2018 10:16:30 +0000 (10:16 +0000)]
drm/i915: Check rq->timeline before deference
Not only is the context suspect to disappearing, but so is it's
timeline. Under a lockless inspection of the requests for
debugging from intel_engine_dump(), the context may already have been
freed and we have to check before chasing the dangling pointer.
Jackie Li [Wed, 14 Mar 2018 00:32:53 +0000 (17:32 -0700)]
drm/i915/guc: Check the locking status of GuC WOPCM registers
GuC WOPCM registers are write-once registers. Current driver code accesses
these registers without checking the accessibility to these registers which
will lead to unpredictable driver behaviors if these registers were touch
by other components (such as faulty BIOS code).
This patch moves the GuC WOPCM registers updating code into intel_wopcm.c
and adds check before and after the update to GuC WOPCM registers so that
we can make sure the driver is in a known state after writing to these
write-once registers.
v6:
- Made sure module reloading won't bug the kernel while doing
locking status checking
v7:
- Fixed patch format issues
v8:
- Fixed coding style issue on register lock bit macro definition (Sagar)
v9:
- Avoided to use redundant !! to cast uint to bool (Chris)
- Return error code instead of GEM_BUG_ON for locked with invalid register
values case (Sagar)
- Updated guc_wopcm_hw_init to use guc_wopcm as first parameter (Michal)
- Added code to set and validate the HuC_LOADING_AGENT_GUC bit in GuC
WOPCM offset register based on the presence of HuC firmware (Michal)
- Use bit fields instead of macros for GuC WOPCM flags (Michal)
v10:
- Refined variable names, removed redundant comments (Joonas)
- Introduced lockable_reg to handle the write once register write and
propagate the write error to caller (Joonas)
- Used lockable_reg abstraction to avoid locking bit check on generic
i915_reg_t (Michal)
- Added log message for error paths (Michal)
- Removed hw_updated flag and only relies on real hardware status
v11:
- Replaced lockable_reg with simplified function (Michal)
- Used new macros for locking bits of WOPCM size/offset registers instead
of using BIT(0) directly (Michal)
- use intel_wopcm_init_hw() called from intel_gem_init_hw() to do GuC
WOPCM register setup instead of calling from intel_uc_init_hw() (Michal)
v12:
- Updated function kernel-doc to align with code changes (Michal)
- Updated code to use wopcm pointer directly (Michal)
v13:
- Updated the ordering of s-o-b/cc/r-b tags (Sagar)
BSpec: 10875, 10833
Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-5-git-send-email-yaodong.li@intel.com
Jackie Li [Wed, 14 Mar 2018 00:32:52 +0000 (17:32 -0700)]
drm/i915: Add HuC firmware size related restriction for Gen9 and CNL A0
On CNL A0 and Gen9, there's a hardware restriction that requires the
available GuC WOPCM size to be larger than or equal to HuC firmware size.
This patch adds new verification code to ensure the available GuC WOPCM
size to be larger than or equal to HuC firmware size on both Gen9 and CNL
A0.
v6:
- Extended HuC FW size check against GuC WOPCM size to all
Gen9 and CNL A0 platforms
v7:
- Fixed patch format issues
v8:
- Renamed variables and functions to avoid ambiguity (Joonas)
- Updated commit message and comments to be more comprehensive (Sagar)
v9:
- Moved code that is not related to restriction check into a separate
patch and updated the commit message accordingly (Sagar/Michal)
- Avoided to call uc_get_fw_size for better layer isolation (Michal)
v10:
- Shorten function names and reorganized size_check code to have clear
isolation (Joonas)
- Removed unnecessary comments (Joonas)
v11:
- Fixed logic error in size check (Michal)
v12:
- Add space between "HuC FW" and "(%uKiB)" in error message (Michal)
v13:
- Updated the ordering of s-o-b/cc/r-b tags (Sagar)
BSpec: 10875
Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v8) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-4-git-send-email-yaodong.li@intel.com
Jackie Li [Wed, 14 Mar 2018 00:32:51 +0000 (17:32 -0700)]
drm/i915: Add support to return CNL specific reserved WOPCM size
CNL has its specific reserved GuC WOPCM size for RC6 and other hardware
contexts.
This patch updates the code to return CNL specific reserved GuC WOPCM size
for RC6 and other hardware contexts so that the GuC WOPCM size can be
calculated correctly for CNL.
v9:
- Created a new patch for these changes originally made in v8 4/6 patch of
this series (Sagar/Michal)
v10:
- Used if-else ladder to the returning of context sizes (Joonas)
v11:
- Removed GUC_ prefix from context size macro (Michal)
v13:
- Updated the ordering of s-o-b/cc/r-b tags (Sagar)
Bspec: 12690
Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-3-git-send-email-yaodong.li@intel.com
Jackie Li [Wed, 14 Mar 2018 00:32:50 +0000 (17:32 -0700)]
drm/i915: Implement dynamic GuC WOPCM offset and size calculation
Hardware may have specific restrictions on GuC WOPCM offset and size. On
Gen9, the value of the GuC WOPCM size register needs to be larger than the
value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for
reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size
will lead to GuC firmware execution failures. On the other hand, with
current static GuC WOPCM offset and size values (512KB for both offset and
size), the GuC WOPCM size verification will fail on Gen9 even if it can be
fixed by lowering the GuC WOPCM offset by calculating its value based on
HuC firmware size (which is likely less than 200KB on Gen9), so that we can
have a GuC WOPCM size value which is large enough to pass the GuC WOPCM
size check.
This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to
24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support
to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To
meet all above requirements, let's provide dynamic partitioning of the
WOPCM that will be based on platform specific HuC/GuC firmware sizes.
v2:
- Removed intel_wopcm_init (Ville/Sagar/Joonas)
- Renamed and Moved the intel_wopcm_partition into intel_guc (Sagar)
- Removed unnecessary function calls (Joonas)
- Init GuC WOPCM partition as soon as firmware fetching is completed
v3:
- Fixed indentation issues (Chris)
- Removed layering violation code (Chris/Michal)
- Created separat files for GuC wopcm code (Michal)
- Used inline function to avoid code duplication (Michal)
v4:
- Preset the GuC WOPCM top during early GuC init (Chris)
- Fail intel_uc_init_hw() as soon as GuC WOPCM partitioning failed
v5:
- Moved GuC DMA WOPCM register updating code into intel_wopcm.c
- Took care of the locking status before writing to GuC DMA
Write-Once registers. (Joonas)
v6:
- Made sure the GuC WOPCM size to be multiple of 4K (4K aligned)
v8:
- Updated comments and fixed naming issues (Sagar/Joonas)
- Updated commit message to include more description about the hardware
restriction on GuC WOPCM size (Sagar)
v9:
- Minor changes variable names and code comments (Sagar)
- Added detailed GuC WOPCM layout drawing (Sagar/Michal)
- Refined macro definitions to be reader friendly (Michal)
- Removed redundent check to valid flag (Michal)
- Unified first parameter for exported GuC WOPCM functions (Michal)
- Refined the name and parameter list of hardware restriction checking
functions (Michal)
v10:
- Used shorter function name for internal functions (Joonas)
- Moved init-ealry function into c file (Joonas)
- Consolidated and removed redundant size checks (Joonas/Michal)
- Removed unnecessary unlikely() from code which is only called once
during boot (Joonas)
- More fixes to kernel-doc format and content (Michal)
- Avoided the use of PAGE_MASK for 4K pages (Michal)
- Added error log messages to error paths (Michal)
v11:
- Replaced intel_guc_wopcm with more generic intel_wopcm and attached
intel_wopcm to drm_i915_private instead intel_guc (Michal)
- dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top
offset from GuC WOPCM base) (Michal)
- Moved WOPCM marco definitions into .c source file (Michal)
- Exported WOPCM layout diagram as kernel-doc (Michal)
v12:
- Updated naming, function kernel-doc to align with new changes (Michal)
v13:
- Updated the ordering of s-o-b/cc/r-b tags (Sagar)
- Corrected one tense error in comment (Sagar)
- Corrected typos and removed spurious comments (Joonas)
Bspec: 12690
Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v8) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-2-git-send-email-yaodong.li@intel.com
Jackie Li [Wed, 14 Mar 2018 00:32:49 +0000 (17:32 -0700)]
drm/i915/guc: Rename guc_ggtt_offset to intel_guc_ggtt_offset
GuC related exported functions should start with "intel_guc_" prefix and
pass intel_guc as the first parameter since its GuC related. Current
guc_ggtt_offset() failed to follow this code convention and this is a
problem for future patches that needs to access intel_guc data to verify
the GGTT offset against the GuC WOPCM top.
This patch renames the guc_ggtt_offset to intel_guc_ggtt_offset and updates
the related code to pass intel_guc pointer to this function call, so that
we can have a unified coding style for GuC code and also enable the future
patches to get GuC related data from intel_guc to do the offset
verification. Meanwhile, this patch also moves the GUC_GGTT_TOP from
intel_guc_regs.h to intel_guc.h since it is not GuC register related
definition.
v8:
- Fixed coding style issues and moved GUC_GGTT_TOP to intel_guc.h (Sagar)
- Updated commit message to explain to reason and motivation to add
intel_guc as the first parameter of intel_guc_ggtt_offset (Chris)
v9:
- Fixed code alignment issue due to line break (Chris)
v10:
- Removed unnecessary comments, redundant code and avoided reuse variable
to avoid potential issues (Joonas)
v13:
- Updated the ordering of s-o-b/cc/r-b tags (Sagar)
drm/i915/psr: Comment to clarify SRD_DEBUG is called PSR_MASK SKL+
What was called SRD_DEBUG(0x6F860) on HSW and BDW was renamed to PSR_MASK
SKL onwards, add a note next to the macro definition.
There is also a different PSR_DEBUG on SKL+ to add to the confusion.
Chris Wilson [Fri, 9 Mar 2018 10:11:14 +0000 (10:11 +0000)]
drm/i915: Show GEM_TRACE when detecting a failed GPU idle
If we timeout waiting for the GPU to idle, something went seriously
wrong. We currently dump the engine state, but we can also dump the
ftrace buffer showing our last operations (when available).
In passing, note that since commit 559e040f1f08 ("drm/i915: Show the GPU
state when declaring wedged", we now show the engine state twice, once
in detecting the failed idle and then again on declaring wedged.
v2: ftrace_dump() takes a parameter specifying whether to dump all cpu
buffers or the local cpu's.
Rodrigo Vivi [Mon, 12 Mar 2018 21:05:28 +0000 (14:05 -0700)]
drm/i915: Move CUR SURFLIVE definition to a better place.
No functional change. But let's keep definitions clean
and cursor related register definitions together.
v2: Fix caps x no caps on same reg. Change name to match
original reg name. (by Ville).
Also fix name on code s/surlive/surflive and on subject
s/cur_surlife/cur surflive/.
Rodrigo Vivi [Wed, 7 Mar 2018 03:34:20 +0000 (19:34 -0800)]
drm/i915/psr: Use more PSR HW tracking.
So far we are using frontbuffer tracking for everything
and ignoring that PSR has a HW capable HW tracking for many
modern usages of GPU on Core platforms and newer Atom ones.
One reason for that is that we were trying to keep same
infrastructure in place for VLV/CHV than the rest of platforms.
But also because when this infrastructure was created
the front-buffer-tracking origin wasn't that good and stable
how it is today after Paulo reworked it to attend FBC cases.
However this PSR implementation without HW tracking died
on gen8LP. And newer platforms are starting to demand more HW
tracking specially with PSR2 cases in mind.
By disabling and re-enabling PSR totally every time we believe
someone is going to change the front buffer content we don't
allow PSR HW tracking to do this job and specially compromising
the whole idea of PSR2 case where the HW tracking detect only
the damaged area and do a partial screen update.
So, from now on, on the platforms that has hw_tracking let's
rely more on HW tracking.
This also is the case in used by other drivers and more validated
by SV teams. So I hope that this will lead us to less misterious
bugs.
v2: Only do this for platform that actually has hw tracking.
v3 from DK
Do this only for flips, small gradual changes are better.
drm/i915/frontbuffer: HW tracking for cursor moves to fix PSR lags.
DRM_IOCTL_MODE_CURSOR results in frontbuffer flush before the cursor
plane MMIOs are written to. But this flush should not be necessary for
PSR as hardware tracking triggers PSR exit when MMIOs are written. As
for FBC, the spec says "Flips or changes to plane size and panning" cause
FBC to be nuked. Use origin == ORIGIN_FLIP so that features can ignore
cursor updates in their frontbuffer_flush implementations.
/sys/kernel/debug/dri/0/i915_fbc_status shows
"Compressing: yes" when I move the cursor around.
v3: Use ORIGIN_FLIP now that pin_to_display does not flush frontbuffer.
v2: Update comment in i915_gem_object_pin_to_display_plane. (Chris)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307033420.3086-2-dhinakaran.pandiyan@intel.com
drm/i915/frontbuffer: Pull frontbuffer_flush out of gem_obj_pin_to_display
i915_gem_obj_pin_to_display() calls frontbuffer_flush with origin set to
DIRTYFB. The callers however are at a vantage point to decide if hardware
frontbuffer tracking can do the flush for us. For example, legacy cursor
updates, like flips, write to MMIO registers, which then triggers PSR flush
by the hardware. Moving frontbuffer_flush out will enable us to skip a
software initiated flush by setting origin to FLIP. Thanks to Chris for the
idea.
v2:
Rebased due to Ville adding intel_plane_pin_fb().
Minor code reordering as fb_obj_flush doesn't need struct_mutex (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307033420.3086-1-dhinakaran.pandiyan@intel.com
Chris Wilson [Tue, 13 Mar 2018 11:31:49 +0000 (11:31 +0000)]
drm/i915: Use sseu size for determining eu_regs[]
eu_regs[] is written 2*max_slices times (like s_reg[]) but oddly read
2*max_slices + max_subslices/2 times. Allocate the array large enough
for the writes to avoid overwriting our stack and worry about the logic
later.
Fixes: 7aa0b14ede64 ("drm/i915: Remove variable length arrays from sseu debugfs printers")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105479 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180313113149.1094-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 13 Mar 2018 00:40:55 +0000 (00:40 +0000)]
drm/i915: Warn against variable length arrays
VLA are strongly discouraged in the kernel due to ambiguity they impose
on the limited stack space and security concerns over manipulating the
stack frame. Add -Wvla to our compiler flags so that CI rejects them.
Chris Wilson [Tue, 13 Mar 2018 00:40:54 +0000 (00:40 +0000)]
drm/i915: Remove variable length arrays from sseu debugfs printers
In order to enable -Wvla to prevent new variable length arrays being
used in i915.ko, we first must remove the existing VLA. Inside
i915_print_sseu_info(), VLA are used as the actual size of the sseu
depends on platform. Replace the VLA with the maximum required.
Michal Wajdeczko [Mon, 12 Mar 2018 13:03:07 +0000 (13:03 +0000)]
drm/i915/uc: Sanitize uC together with GEM
Instead of dancing around uC on reset/suspend/resume scenarios,
explicitly sanitize uC when we sanitize GEM to force uC reload
and start from known beginning.
v2: don't forget about reset path (Daniele)
sanitize uc before gem initiated full reset (Daniele)
v3: drop redundant disable_communication in init_hw (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180312130308.22952-3-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 12 Mar 2018 13:03:06 +0000 (13:03 +0000)]
drm/i915/uc: Sanitize uC options early
We are sanitizing uC related modparams together with other driver
modparams in intel_sanitize_options called from i915_driver_init_hw,
but this is too late for us as we will want to use USES_GUC/USES_HUC
macros at earlier stage. Since our sanitizing does not require any
MMIO access, we can do it in intel_uc_init_early right after we resolve
firmware names.
Chris Wilson [Thu, 8 Mar 2018 14:07:32 +0000 (14:07 +0000)]
drm/i915: Remove the impedance mismatch around intel_engine_enable_signaling
There is some redundancy between dma_fence->ops->enable_signaling (via
i915_fence_enable_signaling) and our backend,
intel_engine_enable_signaling() in that both levels recheck the fence
status multiple times. If we convert intel_engine_enable_signaling() to
return the information desired by dma_fence->ops->enable_signaling, we
can reduce i915_fence_enable_signaling to a simple stub and avoid
trying to reinterpret the same information.
Rodrigo Vivi [Fri, 9 Mar 2018 00:52:18 +0000 (16:52 -0800)]
drm/i915/psr: Display WA 0884 applied broadly for more HW tracking.
WA 0884:bxt:all,cnl:*:A - "When FBC is enabled with eDP PSR,
the CPU host modify writes may not get updated on the Display
as expected.
WA: Write 0x00000000 to CUR_SURFLIVE_A with every CPU
host modify write to trigger PSR exit."
We can also find on spec other cases where they describe
bogus writes to cursor registers to force PSR exit with
HW tracking. And it was confirmed by HW engineers that
this Wa can be safely applied for any frontbuffer activity.
So let's use this more and more here instead of forcibly
disable and re-enable PSR everytime that we have a simple
reliable flush case.
Other commits improve the fbcon/fbdev use a lot, but this
approach is the only when where we can get a fully reliable
console with no slowness or missed frames and PSR still
enabled and active.
v2: - Rebase on drm-tip
- (DK) Add a comment to explain that WA
tells about writing 0 to CUR_SURFLIVE_A but we write to
CUR_SURFLIVE(pipe).
v3: Wa doesn't work on PSR2.
Error state management code was moved into separate .c unit
but we didn't move related definitions into own header.
v2: move also intel_display_error_state forward decl
fix ("Prefer 'unsigned int' to bare use of 'unsigned'")
warnings detected by checkpatch in moved code (Michal)
Definitions in i915_pmu.h header depend on other types and
declarations that were not explicitly included. Fix that by
adding related headers and forward declarations.
While here, change license text to SPDX format.
drm/i915: Change parameters order in i915_gem_batch_pool_init
Function i915_gem_batch_pool_init() failed to follow obj-verb
naming schema. Fix that by swapping function parameters.
While here, change license text to SPDX format.
v2: use intel_engine_init_batch_pool (Chris) as proxy (Michal)
drm/i915: Include i915_reg.h in intel_ringbuffer.h
Header intel_ringbuffer.h is using definitions from i915_reg.h
but forget to include it. Remove this hidden dependency by
explicitly include missing header.
drm/i915/guc: Create common entry points for log register/unregister
We have many functions responsible for allocating different parts of
GuC log runtime called from multiple places. Let's stick with keeping
everything in guc_log_register instead.
v2: Use more generic intel_uc_register name, keep using "misc" suffix (Michał)
s/dev_priv/i915 (Sagar)
Make guc_log_relay_* static (sparse)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180308154707.21716-2-michal.winiarski@intel.com
Chris Wilson [Wed, 7 Mar 2018 13:42:26 +0000 (13:42 +0000)]
drm/i915: Only call tasklet_kill() on the first prepare_reset
tasklet_kill() will spin waiting for the current tasklet to be executed.
However, if tasklet_disable() has been called, then the tasklet is never
executed but permanently put back onto the runlist until
tasklet_enable() is called. Ergo, we cannot use tasklet_kill() inside a
disable/enable pair. This is the case when we call set-wedge from inside
i915_reset(), and another request was submitted to us concurrent to the
reset.
Chris Wilson [Wed, 7 Mar 2018 13:42:25 +0000 (13:42 +0000)]
drm/i915: Wrap engine->schedule in RCU locks for set-wedge protection
Similar to the staging around handling of engine->submit_request, we
need to stop adding to the execlists->queue prior to calling
engine->cancel_requests. cancel_requests will move requests from the
queue onto the timeline, so if we add a request onto the queue after that
point, it will be lost.
Chris Wilson [Wed, 7 Mar 2018 13:42:23 +0000 (13:42 +0000)]
drm/i915: Update ring position from request on retiring
When wedged, we do not update the ring->tail as we submit the requests
causing us to leak the ring->space upon cleaning up the wedged driver.
We can just use the value stored in rq->tail, and keep the submission
backend details away from set-wedge.
Chris Wilson [Wed, 7 Mar 2018 13:42:21 +0000 (13:42 +0000)]
drm/i915: Finish the wait-for-wedge by retiring all the inflight requests
Before we reset the GPU after marking the device as wedged, we wait for
all the remaining requests to be completed (and marked as EIO).
Afterwards, we should flush the request lists so the next batch start
with the driver in an idle state.
Chris Wilson [Fri, 9 Mar 2018 01:08:08 +0000 (01:08 +0000)]
drm/i915: Push irq_shift from gen8_cs_irq_handler() to caller
Originally we were inlining gen8_cs_irq_handler() and so expected the
compiler to constant-fold away the irq_shift (so we had hardcoded it as
opposed to use engine->irq_shift). However, we dropped the inline given
the proliferation of gen8_cs_irq_handler()s. If we pull the shifting
of the iir into the caller, we can shrink the code still further:
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-34 (-34)
Function old new delta
gen8_cs_irq_handler 123 118 -5
gen8_gt_irq_handler 261 248 -13
gen11_irq_handler 722 706 -16
v2: Drop gen11_cs_irq_handler now that it is a simple
stub around gen8_cs_irq_handler (Daniele)
References: 5d3d69d5c119 ("drm/i915: Stop inlining the execlists IRQ handler") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180309010808.11921-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Mar 2018 14:26:48 +0000 (14:26 +0000)]
drm/i915: Index the ring frequency table by HW frequency range
When reporting the frequency table stored in the punit, report the full
range and not just the user restricted frequency range. In the process
keep the code to set the frequency table and read it the same.
v3: As we haven't separated the sb_lock from the pcu_lock yet, there's a
cycle between the pcu_lock and intel_runtime_pm_get.
Chris Wilson [Thu, 8 Mar 2018 14:26:47 +0000 (14:26 +0000)]
drm/i915: Kick the rps worker when changing the boost frequency
The boost frequency is only applied from the RPS worker while someone is
waiting on a request and requested a boost. As such, when the user
wishes to change the frequency, we have to kick the worker in order to
re-evaluate whether to apply the boost frequency.
v2: Check num_waiters to decide if we should kick the worker to handle
boosting.
Changes since v1:
- Don't try to apply CRC workaround when enabling pipe, it should already be enabled.
Changes since v2:
- Make crc functions for !DEBUGFS case inline.
- Pass intel_crtc to crc functions.
- Add comments to callsites.
Changes since v3:
- Cache selected source to pipe_crc->source.
- Set pipe_crc->skipped to MIN_INT during disable to close a race condition.
Changes since v4:
- Handle fallout from setting pipe_crc->source in irq handler.
Chris Wilson [Wed, 7 Mar 2018 17:13:03 +0000 (17:13 +0000)]
drm/i915: Only prune fences after wait-for-all
Currently, we only allow ourselves to prune the fences so long as
all the waits completed (i.e. all the fences we checked were signaled),
and that the reservation snapshot did not change across the wait.
However, if we only waited for a subset of the reservation object, i.e.
just waiting for the last writer to complete as opposed to all readers
as well, then we would erroneously conclude we could prune the fences as
indeed although all of our waits were successful, they did not represent
the totality of the reservation object.
v2: We only need to check the shared fences due to construction (i.e.
all of the shared fences will be later than the exclusive fence, if
any).
Fixes: e54ca9774777 ("drm/i915: Remove completed fences after a wait") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307171303.29466-1-chris@chris-wilson.co.uk
Weinan Li [Tue, 6 Mar 2018 02:15:57 +0000 (10:15 +0800)]
drm/i915: add schedule out notification of preempted but completed request
There is one corner case missing schedule out notification of the preempted
request. The preempted request is just completed when preemption happen,
then it will be canceled and won't be resubmitted later, GVT-g will lost
the schedule out notification.
Here add schedule out notification if found the preempted request has been
completed.
v2:
- refine description, add completed check and notification in
execlists_cancel_port_requests. (Chris)
v3:
- use ternary confitional, remove local variable. (Tvrtko)
With the introduction of asymmetric slices in CNL, we cannot rely on
the previous SUBSLICE_MASK getparam to tell userspace what subslices
are available. Here we introduce a more detailed way of querying the
Gen's GPU topology that doesn't aggregate numbers.
This is essential for monitoring parts of the GPU with the OA unit,
because counters need to be normalized to the number of
EUs/subslices/slices. The current aggregated numbers like EU_TOTAL do
not gives us sufficient information.
The Mesa series making use of this API is :
https://patchwork.freedesktop.org/series/38795/
As a bonus we can draw representations of the GPU :
https://imgur.com/a/vuqpa
v2: Rename uapi struct s/_mask/_info/ (Tvrtko)
Report max_slice/subslice/eus_per_subslice rather than strides (Tvrtko)
Add uapi macros to read data from *_info structs (Tvrtko)
v3: Use !!(v & DRM_I915_BIT()) for uapi macros instead of custom shifts (Tvrtko)
There are a number of information that are readable from hardware
registers and that we would like to make accessible to userspace. One
particular example is the topology of the execution units (how are
execution units grouped in subslices and slices and also which ones
have been fused off for die recovery).
At the moment the GET_PARAM ioctl covers some basic needs, but
generally is only able to return a single value for each defined
parameter. This is a bit problematic with topology descriptions which
are array/maps of available units.
This change introduces a new ioctl that can deal with requests to fill
structures of potentially variable lengths. The user is expected fill
a query with length fields set at 0 on the first call, the kernel then
sets the length fields to the their expected values. A second call to
the kernel with length fields at their expected values will trigger a
copy of the data to the pointed memory locations.
The scope of this uAPI is only to provide information to userspace,
not to allow configuration of the device.
v3: Rename pad fields into flags (Chris)
Return error on flags field != 0 (Chris)
Only copy length back to userspace in drm_i915_query_item (Chris)
v4: Use array of functions instead of switch (Chris)
v5: More comments in uapi (Tvrtko)
Return query item errors in length field (All)
v6: Tweak uapi comments style to match the coding style (Lionel)
v7: Add i915_query.h (Joonas)
v8: (Lionel) Change the behavior of the item iterator to report
invalid queries into the query item rather than stopping the
iteration. This enables userspace applications to query newer
items on older kernels and only have failure on the items that are
not supported.
While the end goal is to make this information available to userspace
through a new ioctl, there is no reason we can't display it in a human
readable fashion through debugfs.
slice0: 3 subslice(s) (0x7):
subslice0: 8 EUs (0xff)
subslice1: 8 EUs (0xff)
subslice2: 8 EUs (0xff)
subslice3: 0 EUs (0x0)
slice1: 3 subslice(s) (0x7):
subslice0: 8 EUs (0xff)
subslice1: 8 EUs (0xff)
subslice2: 8 EUs (0xff)
subslice3: 0 EUs (0x0)
slice2: 3 subslice(s) (0x7):
subslice0: 8 EUs (0xff)
subslice1: 8 EUs (0xff)
subslice2: 8 EUs (0xff)
subslice3: 0 EUs (0x0)
v2: Reformat debugfs printing (Tvrtko)
Use the new EU mask helper (Tvrtko)
v3: Move printing code to intel_device_info.c to be shared with error
state (Michal)
v4: Bump u8 to u16 when using sseu_get_eus() (Lionel)
Up to now, subslice mask was assumed to be uniform across slices. But
starting with Cannonlake, slices can be asymmetric (for example slice0
has different number of subslices as slice1+). This change stores all
subslices masks for all slices rather than having a single mask that
applies to all slices.
v2: Rework how we store total numbers in sseu_dev_info (Tvrtko)
Fix CHV eu masks, was reading disabled as enabled (Tvrtko)
Readability changes (Tvrtko)
Add EU index helper (Tvrtko)
v3: Turn ALIGN(v, 8) / 8 into DIV_ROUND_UP(v, BITS_PER_BYTE) (Tvrtko)
Reuse sseu_eu_idx() for setting eu_mask on CHV (Tvrtko)
Reformat debug prints for subslices (Tvrtko)
v4: Change eu_mask helper into sseu_set_eus() (Tvrtko)
v5: With Haswell reporting masks & counts, bump sseu_*_eus() functions
to use u16 (Lionel)
v6: Fix sseu_get_eus() for > 8 EUs per subslice (Lionel)
v7: Change debugfs enabels for number of subslices per slice, will
need a small igt/pm_sseu change (Lionel)
Drop subslice_total field from sseu_dev_info, rely on
sseu_subslice_total() to recompute the value instead (Lionel)
v8: Remove unused function compute_subslice_total() (Lionel)
Andrew Morton [Thu, 8 Mar 2018 00:13:33 +0000 (16:13 -0800)]
drm/i915/guc: work around gcc-4.4.4 union initializer issue
gcc-4.4.4 has problems with initalizers of anon unions.
drivers/gpu/drm/i915/intel_guc_log.c: In function 'guc_log_control':
drivers/gpu/drm/i915/intel_guc_log.c:64: error: unknown field 'logging_enabled' specified in initializer
Work around this.
Fixes: 35fe703c3161 ("drm/i915/guc: Change values for i915_guc_log_control") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180308001333.rI2vrNRTY%akpm@linux-foundation.org
The main difference with previous GENs is that starting from Gen11
each VCS and VECS engine has its own power well, which only exist
if the related engine exists in the HW.
The fallback forcewake request workaround is only needed on gen9
according to the HSDES WA entry (1604254524), so we can go back to using
the simpler fw_domains_get/put functions.
BSpec: 18331
v2: fix fwtable, use array to test shadow tables, create new
accessors to avoid check on every access (Tvrtko)
v3 (from Paulo): Rebase.
v4:
- Range 09400-097FF should be FORCEWAKE_ALL (Daniele)
- Use the BIT macro for forcewake domains (Daniele)
- Add a comment about the range ordering (Oscar)
- Updated commit message (Oscar)
v5: Rebased
v6: Use I915_MAX_VCS/VECS (Michal)
v7: translate FORCEWAKE_ALL to available domains
v8: rebase, add clarification on fallback ack in commit message.
v9: fix rebase issue, change check in fw_domains_init from IS_GEN11
to GEN >= 11
v10: Generate is_genX_shadowed with a macro (Daniele)
Include gen11_fw_ranges in the selftest (Michel)
v11: Simplify FORCEWAKE_ALL, new line between NEEDS_FORCEWAKEs (Tvrtko)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-6-mika.kuoppala@linux.intel.com Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Thomas Daniel [Fri, 2 Mar 2018 16:14:59 +0000 (18:14 +0200)]
drm/i915/icl: Enhanced execution list support
Enhanced Execlists is an upgraded version of execlists which supports
up to 8 ports. The lrcs to be submitted are written to a submit queue
(the ExecLists Submission Queue - ELSQ), which is then loaded on the
HW. When writing to the ELSP register, the lrcs are written cyclically
in the queue from position 0 to position 7. Alternatively, it is
possible to write directly in the individual positions of the queue
using the ELSQC registers. To be able to re-use all the existing code
we're using the latter method and we're currently limiting ourself to
only using 2 elements.
v2: Rebase.
v3: Switch from !IS_GEN11 to GEN < 11 (Daniele Ceraolo Spurio).
v4: Use the elsq registers instead of elsp. (Daniele Ceraolo Spurio)
v5: Reword commit, rename regs to be closer to specs, turn off
preemption (Daniele), reuse engine->execlists.elsp (Chris)
v6: use has_logical_ring_elsq to differentiate the new paths
v7: add preemption support, rename els to submit_reg (Chris)
v8: save the ctrl register inside the execlists struct, drop CSB
handling updates (superseded by preempt_complete_status) (Chris)
v9: s/drm_i915_gem_request/i915_request (Mika)
v10: resolved conflict in inject_preempt_context (Mika)
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-4-mika.kuoppala@linux.intel.com
Starting from Gen11 the context descriptor format has been updated in
the HW. The hw_id field has been considerably reduced in size and engine
class and instance fields have been added.
There is a slight name clashing issue because the field that we call
hw_id is actually called SW Context ID in the specs for Gen11+.
With the current size of the hw_id field we can have a maximum of 2k
contexts at any time, but we could use the sw_counter field (which is sw
defined) to increase that because the HW requirement is that
engine_id + sw id + sw_counter is a unique number.
GuC uses a similar method to support more contexts but does its tracking
at lrc level. To avoid doing an implementation that will need to be
reworked once GuC support lands, defer it for now and mark it as TODO.
v2: rebased, add documentation, fix GEN11_ENGINE_INSTANCE_SHIFT
v3: rebased, bring back lost code from i915_gem_context.c
v4: make TODO comment more generic
v5: be consistent with bit ordering, add extra checks (Chris)
Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Oscar Mateo <oscar.mateo@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-3-mika.kuoppala@linux.intel.com Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
projects / mirror_ubuntu-hirsute-kernel.git / log