Currently COMPAT on SPARC64 selects COMPAT_BINFMT_ELF unconditionally,
even when BINFMT_ELF is not enabled. This causes a kconfig warning.
Instead, just select COMPAT_BINFMT_ELF if BINFMT_ELF is enabled.
This builds cleanly with no kconfig warnings.
WARNING: unmet direct dependencies detected for COMPAT_BINFMT_ELF
Depends on [n]: COMPAT [=y] && BINFMT_ELF [=n]
Selected by [y]:
- COMPAT [=y] && SPARC64 [=y]
Fixes: 26b4c912185a ("sparc,sparc64: unify Kconfig files") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The ubsan reported the following error. It was because sample's raw
data missed u32 padding at the end. So it broke the alignment of the
array after it.
The raw data contains an u32 size prefix so the data size should have
an u32 padding after 8-byte aligned data.
27: Sample parsing :util/synthetic-events.c:1539:4:
runtime error: store to misaligned address 0x62100006b9bc for type
'__u64' (aka 'unsigned long long'), which requires 8 byte alignment
0x62100006b9bc: note: pointer points here
00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
#0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13
#1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8
#2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9
#3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9
#4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9
#5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4
#6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9
#7 0x56153264e796 in run_builtin perf.c:312:11
#8 0x56153264cf03 in handle_internal_command perf.c:364:8
#9 0x56153264e47d in run_argv perf.c:408:2
#10 0x56153264c9a9 in main perf.c:538:3
#11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc)
#12 0x561532596828 in _start ...
SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use
util/synthetic-events.c:1539:4 in
Fixes: 045f8cd8542d ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The code assumed every CYC-eligible packet has a CYC packet, which is not
the case when CYC thresholds are used. Fix by checking if a CYC packet is
actually present in that case.
Fixes: 5b1dc0fd1da06 ("perf intel-pt: Add support for samples to contain IPC ratio") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20210205175350.23817-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The code assumed a change in cycle count means accurate IPC. That is not
correct, for example when sampling both branches and instructions, or at
a FUP packet (which is not CYC-eligible) address. Fix by using an explicit
flag to indicate when IPC can be sampled.
Fixes: 5b1dc0fd1da06 ("perf intel-pt: Add support for samples to contain IPC ratio") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20210205175350.23817-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
When locating the DWARF module for a given address, __find_debuginfo()
requires a 'struct dso' passed via the userdata argument.
However, this field is only set in __report_module() if the module is
found in via dwfl_addrmodule(), not if it is found later via
dwfl_report_elf().
Set userdata irrespective of how the DWARF module was found, as long as
we found a module.
Fixes: bf53fc6b5f41 ("perf unwind: Fix separate debug info files when using elfutils' libdw's unwinder") Signed-off-by: Dave Rigby <d.rigby@me.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211801 Acked-by: Jan Kratochvil <jan.kratochvil@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/linux-perf-users/20210218165654.36604-1-d.rigby@me.com/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Commit da231338ec9c0987 ("perf record: Use an eventfd to wakeup when
done") uses eventfd() to solve a rare race where the setting and
checking of 'done' which add done_fd to pollfd. When draining buffer,
revents of done_fd is 0 and evlist__filter_pollfd function returns a
non-zero value. As a result, perf record does not stop profiling.
The following simple scenarios can trigger this condition:
# sleep 10 &
# perf record -p $!
After the sleep process exits, perf record should stop profiling and exit.
However, perf record keeps running.
If pollfd revents contains only POLLERR or POLLHUP, perf record
indicates that buffer is draining and need to stop profiling. Use
fdarray_flag__nonfilterable() to set done eventfd to nonfilterable
objects, so that evlist__filter_pollfd() does not filter and check done
eventfd.
Fixes: da231338ec9c0987 ("perf record: Use an eventfd to wakeup when done") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: zhangjinhao2@huawei.com Link: http://lore.kernel.org/lkml/20210205065001.23252-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
If v4l2_ctrl_handler_setup() fails then probe() should return an error
code instead of returning success.
Fixes: cee1e3e2ef39 ("media: add video control handlers using V4L2 control framework") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKFkbATXa5fA3xj@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
drivers/infiniband/ulp/rtrs/rtrs-srv.c:1805 rtrs_rdma_connect() warn: passing zero to 'PTR_ERR'
Which is trying to say smatch has shown that srv is not an error pointer
and thus cannot be passed to PTR_ERR.
The solution is to move the list_add() down after full initilization of
rtrs_srv. To avoid holding the srv_mutex too long, only hold it during the
list operation as suggested by Leon.
Fixes: 03e9b33a0fd6 ("RDMA/rtrs: Only allow addition of path to an already established session") Link: https://lore.kernel.org/r/20210216143807.65923-1-jinpu.wang@cloud.ionos.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
put_device() decreases the ref-count and then the device will be
cleaned-up, while at is also add missing put_device in
rtrs_srv_create_once_sysfs_root_folders
Fixes: baa5b28b7a47 ("RDMA/rtrs-srv: Replace device_register with device_initialize and device_add") Link: https://lore.kernel.org/r/20210212134525.103456-5-jinpu.wang@cloud.ionos.com Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
It is caused by the not-freed kobject of rtrs_srv_sess. The kobject
embedded in rtrs_srv_sess has ref-counter 2 after calling
process_info_req(). Therefore it must call kobject_put twice. Currently
it calls kobject_put only once at rtrs_srv_destroy_sess_files because
kobject_del removes the state_in_sysfs flag and then kobject_put in
free_sess() is not called.
This patch moves kobject_del() into free_sess() so that the kobject of
rtrs_srv_sess can be freed. And also this patch adds the missing call of
sysfs_remove_group() to clean-up the sysfs directory.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20210212134525.103456-4-jinpu.wang@cloud.ionos.com Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
While adding a path from the client side to an already established
session, it was possible to provide the destination IP to a different
server. This is dangerous.
This commit adds an extra member to the rtrs_msg_conn_req structure, named
first_conn; which is supposed to notify if the connection request is the
first for that session or not.
On the server side, if a session does not exist but the first_conn
received inside the rtrs_msg_conn_req structure is 1, the connection
request is failed. This signifies that the connection request is for an
already existing session, and since the server did not find one, it is an
wrong connection request.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20210212134525.103456-3-jinpu.wang@cloud.ionos.com Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Reviewed-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The problem is when we send imm_wr, the type should be ib_rdma_wr, so hw
driver like mlx4 can do rdma_wr(wr), so fix it by use the ib_rdma_wr as
type for imm_wr.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20210212134525.103456-2-jinpu.wang@cloud.ionos.com Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
ucma_process_join() allocates struct ucma_multicast mc and frees it if an
error occurs during its run. Specifically, if an error occurs in
copy_to_user(), a use-after-free might happen in the following scenario:
1. mc struct is allocated.
2. rdma_join_multicast() is called and succeeds. During its run,
cma_iboe_join_multicast() enqueues a work that will later use the
aforementioned mc struct.
3. copy_to_user() is called and fails.
4. mc struct is deallocated.
5. The work that was enqueued by cma_iboe_join_multicast() is run and
calls ucma_create_uevent() which tries to access mc struct (which is
freed by now).
Fix this bug by cancelling the work enqueued by cma_iboe_join_multicast().
Since cma_work_handler() frees struct cma_work, we don't use it in
cma_iboe_join_multicast() so we can safely cancel the work later.
The following syzkaller report revealed it:
BUG: KASAN: use-after-free in ucma_create_uevent+0x2dd/0x;3f0 drivers/infiniband/core/ucma.c:272
Read of size 8 at addr ffff88810b3ad110 by task kworker/u8:1/108
Freed by task 359:
kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48
kasan_set_track+0x1c/0×30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0×30 mm/kasan/generic.c:355
__kasan_slab_free+0x112/0×160 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook mm/slub.c:1577 [inline]
slab_free mm/slub.c:3142 [inline]
kfree+0xb3/0×3e0 mm/slub.c:4124
ucma_process_join+0x22d/0×3f0 drivers/infiniband/core/ucma.c:1497
ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538
ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724
vfs_write fs/read_write.c:603 [inline]
vfs_write+0x191/0×4c0 fs/read_write.c:585
ksys_write+0x1a1/0×1e0 fs/read_write.c:658
do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88810b3ad100
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 16 bytes inside of
192-byte region [ffff88810b3ad100, ffff88810b3ad1c0)
Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join") Link: https://lore.kernel.org/r/20210211090517.1278415-1-leon@kernel.org Reported-by: Amit Matityahu <mitm@nvidia.com> Signed-off-by: Avihai Horon <avihaih@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
When posting a multi-descriptors command, the error code of previous
failed descriptors may be rewrote to 0 by a later successful descriptor.
Fixes: a04ff739f2a9 ("RDMA/hns: Add command queue support for hip08 RoCE driver") Link: https://lore.kernel.org/r/1612688143-28226-3-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
A primary reason for skipping ceph_check_caps after putting the
references was to avoid the locking in ceph_check_caps during a
reconnect. __ceph_put_cap_refs can still call ceph_flush_snaps in that
case though, and that takes many of the same inconvenient locks.
Fix the logic in __ceph_put_cap_refs to skip flushing snaps when the
skip_checking_caps flag is set.
Fixes: e64f44a88465 ("ceph: skip checking caps when session reconnecting and releasing reqs") Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
RDMA core mutex locking was restructured by commit d114c6feedfe
("RDMA/cma: Add missing locking to rdma_accept()") [Aug 2020]. When
lock debugging is enabled, the RPC/RDMA server trips over the new
lockdep assertion in rdma_accept() because it doesn't call
rdma_accept() from its CM event handler.
As a temporary fix, have svc_rdma_accept() take the handler_mutex
explicitly. In the meantime, let's consider how to restructure the
RPC/RDMA transport to invoke rdma_accept() from the proper context.
Calls to svc_rdma_accept() are serialized with calls to
svc_rdma_free() by the generic RPC server layer.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/linux-rdma/20210209154014.GO4247@nvidia.com/ Fixes: d114c6feedfe ("RDMA/cma: Add missing locking to rdma_accept()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
These pernet operations may depend on stuff set up or torn down in the
module init/exit functions. And they may be called at any time in
between. So it makes more sense for them to be the last to be
registered in the init function, and the first to be unregistered in the
exit function.
In particular, without this, the drc slab is being destroyed before all
the per-net drcs are shut down, resulting in an "Objects remaining in
nfsd_drc on __kmem_cache_shutdown()" warning in exit_nfsd.
Reported-by: Zhi Li <yieli@redhat.com> Fixes: 3ba75830ce17 "nfsd4: drc containerization" Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The first time dso__load() was called on a PE file it always returned -1
error. This caused the first call to map__find_symbol() to always fail
on a PE file so the first sample from each PE file always had symbol
<unknown>. Subsequent samples succeed however because the DSO is already
loaded.
This fixes dso__load() to return 0 when successfully loading a DSO with
libbfd.
Fixes: eac9a4342e5447ca ("perf symbols: Try reading the symbol table with libbfd") Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Huw Davies <huw@codeweavers.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Song Liu <songliubraving@fb.com> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: http://lore.kernel.org/lkml/1671b43b-09c3-1911-dbf8-7f030242fbf7@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
If message sizes average larger than expected (more than 32
characters), the data_ring will wrap before the desc_ring. Once the
data_ring wraps, it will start invalidating descriptors. These
invalid descriptors hang around until they are eventually recycled
when the desc_ring wraps. Readers do not care about invalid
descriptors, but they still need to iterate past them. If the
average message size is much larger than 32 characters, then there
will be many invalid descriptors preceding the valid descriptors.
The function prb_first_valid_seq() always begins at the oldest
descriptor and searches for the first valid descriptor. This can
be rather expensive for the above scenario. And, in fact, because
of its heavy usage in /dev/kmsg, there have been reports of long
delays and even RCU stalls.
For code that does not need to search from the oldest record,
replace prb_first_valid_seq() usage with prb_read_valid_*()
functions, which provide a start sequence number to search from.
Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer") Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: J. Avila <elavila@google.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210211173152.1629-1-john.ogness@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
With the introduction of 26751de25d25 ("spi: bcm2835: Micro-optimise
FIFO loops") it has become apparent that some users might initiate
zero-length SPI transfers. A fact the micro-optimization omitted, and
which turned out to cause crashes[1].
Instead of changing the micro-optimization itself, use a bigger hammer
and skip zero-length transfers altogether for drivers using the default
transfer_one_message() implementation.
Reported-by: Phil Elwell <phil@raspberrypi.com> Fixes: 26751de25d25 ("spi: bcm2835: Micro-optimise FIFO loops") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
[1] https://github.com/raspberrypi/linux/issues/4100 Link: https://lore.kernel.org/r/20210211180820.25757-1-nsaenzjulienne@suse.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Since "data" is u32, &data is a "u32 *" type, which means pointer math
will move in u32-sized steps. This was meant to be a byte offset, so
cast &data to "char *" to aim the copy into the correct location.
Seen with -Warray-bounds (and found by Coverity):
In file included from ./include/linux/string.h:269,
from ./arch/powerpc/include/asm/paca.h:15,
from ./arch/powerpc/include/asm/current.h:13,
from ./include/linux/mutex.h:14,
from ./include/linux/notifier.h:14,
from ./include/linux/clk.h:14,
from drivers/spi/spi-dw-bt1.c:12:
In function 'memcpy',
inlined from 'dw_spi_bt1_dirmap_copy_from_map' at drivers/spi/spi-dw-bt1.c:87:3:
./include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset 4 is out of the bounds [0, 4] of object 'data' with type 'u32' {aka 'unsigned int'} [-Warray-bounds]
20 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:191:9: note: in expansion of macro '__underlying_memcpy'
191 | return __underlying_memcpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~
drivers/spi/spi-dw-bt1.c: In function 'dw_spi_bt1_dirmap_copy_from_map':
drivers/spi/spi-dw-bt1.c:77:6: note: 'data' declared here
77 | u32 data;
| ^~~~
Addresses-Coverity: CID 1497771 Out-of-bounds access Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20210211203714.1929862-1-keescook@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The ROHM BD718x7 and BD71828 drivers support setting HW state
specific voltages from device-tree. This is used also by various
in-tree DTS files.
These drivers do incorrectly try to compose bit-map using enum
values. By a chance this works for first two valid levels having
values 1 and 2 - but setting values for the rest of the levels
do indicate capability of setting values for first levels as
well. Luckily the regulators which support setting values for
SUSPEND/LPSR do usually also support setting values for RUN
and IDLE too - thus this has not been such a fatal issue.
Fix this by defining the old enum values as bits and fixing the
parsing code. This allows keeping existing IC specific drivers
intact and only slightly changing the rohm-regulator.c
Fixes: 21b72156ede8b ("regulator: bd718x7: Split driver to common and bd718x7 specific parts") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210212080023.GA880728@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
GCC (GCC) 8.4.0 20200304 fails to build perf with:
: util/symbol.c: In function 'dso__load_bfd_symbols':
: util/symbol.c:1626:16: error: comparison of integer expressions of different signednes
: for (i = 0; i < symbols_count; ++i) {
: ^
: util/symbol.c:1632:16: error: comparison of integer expressions of different signednes
: while (i + 1 < symbols_count &&
: ^
: util/symbol.c:1637:13: error: comparison of integer expressions of different signednes
: if (i + 1 < symbols_count &&
: ^
: cc1: all warnings being treated as errors
It's unlikely that the symtable will be that big, but the fix is an
oneliner and as perf has CORE_CFLAGS += -Wextra, which makes build to
fail together with CORE_CFLAGS += -Werror
Fixes: eac9a4342e54 ("perf symbols: Try reading the symbol table with libbfd") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Jacek Caban <jacek@codeweavers.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Link: http://lore.kernel.org/lkml/20210209145148.178702-1-dima@arista.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Starting from A2, the A-PLL calculation has changed. Use the
existing formula for A0/A1 and the new formula for A2 onwards.
Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC") Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Link: https://lore.kernel.org/r/20210119061715.6043-1-ryan_chen@aspeedtech.com Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Use the correct name to avoid ldo7 commands being sent to ldo6's address.
Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210211034935.5622-1-jonathan@marek.ca Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Since de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace
Access Protection"), user access helpers call user_{read|write}_access_{begin|end}
when user space access is allowed.
Commit 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") made
the mentioned helpers program a AMR special register to allow such
access for a short period of time, most of the time AMR is expected to
block user memory access by the kernel.
Since the code accesses the user space memory, unsafe_get_user() calls
might_fault() which calls arch_local_irq_restore() if either
CONFIG_PROVE_LOCKING or CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
arch_local_irq_restore() then attempts to replay pending soft
interrupts as KUAP regions have hardware interrupts enabled.
If a pending interrupt happens to do user access (performance
interrupts do that), it enables access for a short period of time so
after returning from the replay, the user access state remains blocked
and if a user page fault happens - "Bug: Read fault blocked by AMR!"
appears and SIGSEGV is sent.
To fix it save/restore the AMR when replaying interrupts, and also
add a check if AMR was not blocked prior to replaying interrupts.
Originally found by syzkaller.
Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use normal commit citation format and add full oops log to
change log, move kuap_check_amr() into the restore routine to
avoid warnings about unreconciled IRQ state] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210202091541.36499-1-aik@ozlabs.ru Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The amount of code executed with enabled user space access (unlocked
KUAP) should be minimal. However with CONFIG_PROVE_LOCKING or
CONFIG_DEBUG_ATOMIC_SLEEP enabled, might_fault() calls into various
parts of the kernel, and may even end up replaying interrupts which in
turn may access user space and forget to restore the KUAP state.
The problem places are:
1. strncpy_from_user (and similar) which unlock KUAP and call
unsafe_get_user -> __get_user_allowed -> __get_user_nocheck()
with do_allow=false to skip KUAP as the caller took care of it.
2. __unsafe_put_user_goto() which is called with unlocked KUAP.
Change __get_user_nocheck() to look at `do_allow` to decide whether to
skip might_fault(). Since strncpy_from_user/etc call might_fault()
anyway before unlocking KUAP, there should be no visible change.
Drop might_fault() in __unsafe_put_user_goto() as it is only called
from unsafe_put_user(), which already has KUAP unlocked.
Since keeping might_fault() is still desirable for debugging, add
calls to it in user_[read|write]_access_begin(). That also allows us
to drop the is_kernel_addr() test, because there should be no code
using user_[read|write]_access_begin() in order to access a kernel
address.
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Combine with related patch from myself, merge change logs] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210204121612.32721-1-aik@ozlabs.ru Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Wildcat Point has two SPI controllers and added one is actually second one.
Fix the numbering by adding the description of the first one.
Fixes: caba248db286 ("spi: spi-pxa2xx-pci: Add ID and driver type for WildcatPoint PCH") Cc: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210208163816.22147-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
If a driver registers a divider clock with a parent_hw instead of the
parent_name, the parent_hw is ignored and the clock does not have a
parent.
Fix this by initializing the parents the same way they are initialized
for clock gates.
Fixes: ff258817137a ("clk: divider: Add support for specifying parents via DT/pointers") Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-3-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
This feature should only be enabled by querying capability from firmware.
Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware") Link: https://lore.kernel.org/r/1612517974-31867-5-git-send-email-liweihang@huawei.com Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Add the mapped page count checking flow to avoid invalid page size when
creating MTR.
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing") Link: https://lore.kernel.org/r/1612517974-31867-4-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
This bit should be in type of enum ib_sig_type, or there will be a sparse
warning.
Fixes: bfe860351e31 ("RDMA/hns: Fix cast from or to restricted __le32 for driver") Link: https://lore.kernel.org/r/1612517974-31867-3-git-send-email-liweihang@huawei.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
ULP usually set IB(V)_QP_AV when trying to modify QP to RTR if they want
to record sgid index into QPC. For UD QPs, it is useless because it will
be included in WQE. For RC QPs, it will be filled in
hns_roce_set_path(). So sgid index shouldn't be filled by default. Then
hns_get_gid_index() is moved to hns_roce_hw_v1.c because it is only called
in it.
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC") Link: https://lore.kernel.org/r/1612517974-31867-2-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The size of tx_valid_cpus was calculated under the assumption that the
numa nodes identifiers are continuous, which is not the case in all archs
as this could lead to the following panic when trying to access an invalid
tx_valid_cpus index, avoid the following panic by using nr_node_ids
instead of num_online_nodes() to allocate the tx_valid_cpus size.
According to the IB Specification, srq_limit shouldn't be configured
during SRQ creation. If a user set srq_limit at this time, the driver
should forced it to zero, or the result of creating SRQ will conflict with
the result of querying SRQ.
Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode") Link: https://lore.kernel.org/r/1611997090-48820-4-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
If a user posts WR by wr_list, the head pointer of idx_queue won't be
updated until all wqes are filled, so the judgment of whether head equals
to tail will get a wrong result. Fix above issue and move the head and
tail pointer from the srq structure into the idx_queue structure. After
idx_queue is filled with wqe idx, the head pointer of it will increase.
Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode") Link: https://lore.kernel.org/r/1611997090-48820-3-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the
driver needs to allocate at least one SGE when creating RQ/SRQ and ensure
that at least one SGE is filled with the special value during post_recv.
Besides, the kernel driver should only do this for kernel ULP. For
userspace ULP, the userspace driver will allocate the reserved SGE in
buffer, and the kernel driver just needs to pin the corresponding size of
memory based on the userspace driver's requirements.
Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Copied in from somewhere else, the makefile was including
the kerne's usr/include dir, which caused the asm/ioctl.h file
to be used.
Unfortunately, that file has different values for _IOC_SIZEBITS
and _IOC_WRITE than include/uapi/asm-generic/ioctl.h which then
causes the _IOCW macros to give the wrong ioctl numbers,
specifically for DMA_BUF_IOCTL_SYNC.
This patch simply removes the extra include from the Makefile
* Stop leaking file objects.
* Use self.addCleanup() to ensure we call cleanup functions even if
setUp() fails.
* use mock.patch.stopall instead of more error-prone manual approach
Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
All of the GPLLs in the MSM8998 Global Clock Controller are Fabia PLLs
and not generic alphas: this was producing bad effects over the entire
clock tree of MSM8998, where any GPLL child clock was declaring a false
clock rate, due to their parent also showing the same.
The issue resides in the calculation of the clock rate for the specific
Alpha PLL type, where Fabia has a different register layout; switching
the MSM8998 GPLLs to the correct Alpha Fabia PLL type fixes the rate
(calculation) reading. While at it, also make these PLLs fixed since
their rate is supposed to *never* be changed while the system runs, as
this would surely crash the entire SoC.
Now all the children of all the PLLs are also complying with their
specified clock table and system stability is improved.
Fixes: b5f5f525c547 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210114221059.483390-7-angelogioacchino.delregno@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
There are intermittent GDSC power-up failures observed for titan top
gdsc, which requires the XO clock. Thus mark all the MM XO clocks always
enabled from probe.
Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1611128871-5898-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Commit 8813ff49607e ("powerpc/sstep: Check instruction validity
against ISA version before emulation") introduced a proper way to skip
unknown instructions. This makes sure that the same is used for the
darn instruction when the range selection bits have a reserved value.
Fixes: a23987ef267a ("powerpc: sstep: Add support for darn instruction") Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210204080744.135785-2-sandipan@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The Power ISA says that the fixed-point load and update instructions
must neither use R0 for the base address (RA) nor have the
destination (RT) and the base address (RA) as the same register.
Similarly, for fixed-point stores and floating-point loads and stores,
the instruction is invalid when R0 is used as the base address (RA).
This is applicable to the following instructions.
* Load Byte and Zero with Update (lbzu)
* Load Byte and Zero with Update Indexed (lbzux)
* Load Halfword and Zero with Update (lhzu)
* Load Halfword and Zero with Update Indexed (lhzux)
* Load Halfword Algebraic with Update (lhau)
* Load Halfword Algebraic with Update Indexed (lhaux)
* Load Word and Zero with Update (lwzu)
* Load Word and Zero with Update Indexed (lwzux)
* Load Word Algebraic with Update Indexed (lwaux)
* Load Doubleword with Update (ldu)
* Load Doubleword with Update Indexed (ldux)
* Load Floating Single with Update (lfsu)
* Load Floating Single with Update Indexed (lfsux)
* Load Floating Double with Update (lfdu)
* Load Floating Double with Update Indexed (lfdux)
* Store Byte with Update (stbu)
* Store Byte with Update Indexed (stbux)
* Store Halfword with Update (sthu)
* Store Halfword with Update Indexed (sthux)
* Store Word with Update (stwu)
* Store Word with Update Indexed (stwux)
* Store Doubleword with Update (stdu)
* Store Doubleword with Update Indexed (stdux)
* Store Floating Single with Update (stfsu)
* Store Floating Single with Update Indexed (stfsux)
* Store Floating Double with Update (stfdu)
* Store Floating Double with Update Indexed (stfdux)
E.g. the following behaviour is observed for an invalid load and
update instruction having RA = RT.
While a userspace program having an instruction word like 0xe9ce0001,
i.e. ldu r14, 0(r14), runs without getting receiving a SIGILL on a
Power system (observed on P8 and P9), the outcome of executing that
instruction word varies and its behaviour can be considered to be
undefined.
Attaching an uprobe at that instruction's address results in emulation
which currently performs the load as well as writes the effective
address back to the base register. This might not match the outcome
from hardware.
To remove any inconsistencies, this adds additional checks for the
aforementioned instructions to make sure that the emulation
infrastructure treats them as unknown. The kernel can then fallback to
executing such instructions on hardware.
Fixes: 0016a4cf5582 ("powerpc: Emulate most Book I instructions in emulate_step()") Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210204080744.135785-1-sandipan@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
For unimplemented instructions or unimplemented SPRs, the 8xx triggers
a "Software Emulation Exception" (0x1000). That interrupt doesn't set
reason bits in SRR1 as the "Program Check Exception" does.
Go through emulation_assist_interrupt() to set REASON_ILLEGAL.
dlpar_configure_connector() has two problems in its handling of
ibm,configure-connector's return status:
1. When the status is -2 (busy, call again), we call
ibm,configure-connector again immediately without checking whether
to schedule, which can result in monopolizing the CPU.
2. Extended delay status (9900..9905) goes completely unhandled,
causing the configuration to unnecessarily terminate.
Fix both of these issues by using rtas_busy_delay().
The "req" struct is always added to the "wm831x->auxadc_pending" list,
but it's only removed from the list on the success path. If a failure
occurs then the "req" struct is freed but it's still on the list,
leading to a use after free.
Fixes: 78bb3688ea18 ("mfd: Support multiple active WM831x AUXADC conversions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
A recent fix improved the way the resource gets passed to
the low-level accessors, but left one warning that appears
in configurations with a resource_size_t that is wider than
a pointer:
In file included from drivers/mfd/altera-sysmgr.c:19:
drivers/mfd/altera-sysmgr.c: In function 'sysmgr_probe':
drivers/mfd/altera-sysmgr.c:148:40: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
148 | regmap = devm_regmap_init(dev, NULL, (void *)res->start,
| ^
include/linux/regmap.h:646:6: note: in definition of macro '__regmap_lockdep_wrapper'
646 | fn(__VA_ARGS__, &_key, \
| ^~~~~~~~~~~
drivers/mfd/altera-sysmgr.c:148:12: note: in expansion of macro 'devm_regmap_init'
148 | regmap = devm_regmap_init(dev, NULL, (void *)res->start,
| ^~~~~~~~~~~~~~~~
I had tried a different approach that would store the address
in the private data as a phys_addr_t, but the easiest solution
now seems to be to add a double cast to shut up the warning.
As the address is passed to an inline assembly, it is guaranteed
to not be wider than a register anyway.
Fixes: d9ca7801b6e5 ("mfd: altera-sysmgr: Fix physical address storing hacks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
rxe_net.c sends packets at the IP layer with skb->data pointing at the IP
header but receives packets from a UDP tunnel with skb->data pointing at
the UDP header. On the loopback path this was not correctly accounted
for. This patch corrects for this by using sbk_pull() to strip the IP
header from the skb on received packets.
Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20210128182301.16859-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
rxe_rcv_mcast_pkt() in rxe_recv.c can leak SKBs in error path code. The
loop over the QPs attached to a multicast group creates new cloned SKBs
for all but the last QP in the list and passes the SKB and its clones to
rxe_rcv_pkt() for further processing. Any QPs that do not pass some checks
are skipped. If the last QP in the list fails the tests the SKB is
leaked. This patch checks if the SKB for the last QP was used and if not
frees it. Also removes a redundant loop invariant assignment.
Fixes: 8700e3e7c485 ("Soft RoCE driver") Fixes: 71abf20b28ff ("RDMA/rxe: Handle skb_clone() failure in rxe_recv.c") Link: https://lore.kernel.org/r/20210128174752.16128-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
check_type_state() in rxe_recv.c is written as if the type bits in the
packet opcode were a bit mask which is not correct. This patch corrects
this code to compare all 3 type bits to the required type.
Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20210127214500.3707-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Fixes: 96415e4d3f5fdf9c ("perf symbols: Avoid unnecessary symbol loading when dso list is specified") Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210128131209.GD775562@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
All devices that expose Intel Platform Monitoring Technology (PMT)
crashlog are currently owned by the intel_pmt MFD driver. Therefore make
the crashlog driver depend on the MFD driver for build.
Fixes: 5ef9998c96b0 ("platform/x86: Intel PMT Crashlog capability driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20210126205508.30907-3-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
All devices that expose Intel Platform Monitoring Technology (PMT)
telemetry are currently owned by the intel_pmt MFD driver. Therefore make
the telemetry driver depend on the MFD driver for build.
Fixes: 68fe8e6e2c4b ("platform/x86: Intel PMT Telemetry capability driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20210126205508.30907-2-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Fix error in Kconfig that exposed INTEL_PMT_CLASS as a user selectable
option. It is already selected by INTEL_PMT_TELEMETRY and
INTEL_PMT_CRASHLOG which are user selectable.
Fixes: e2729113ce66 ("platform/x86: Intel PMT class driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20210126205508.30907-1-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The Xilinx zynqmp RTC driver makes use of IOMEM functions like
devm_platform_ioremap_resource(), which are only available if
CONFIG_HAS_IOMEM is defined.
This causes the driver not to be enable under make ARCH=um allyesconfig,
even though it won't build.
By adding a dependency on HAS_IOMEM, the driver will not be enabled on
architectures which don't support it.
Fixes: 09ef18bcd5ac ("rtc: use devm_platform_ioremap_resource() to simplify code") Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210127035146.1523286-1-davidgow@google.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The list of tracepoint callbacks is managed by an array that is protected
by RCU. To update this array, a new array is allocated, the updates are
copied over to the new array, and then the list of functions for the
tracepoint is switched over to the new array. After a completion of an RCU
grace period, the old array is freed.
This process happens for both adding a callback as well as removing one.
But on removing a callback, if the new array fails to be allocated, the
callback is not removed, and may be used after it is freed by the clients
of the tracepoint.
There's really no reason to fail if the allocation for a new array fails
when removing a function. Instead, the function can simply be replaced by a
stub function that could be cleaned up on the next modification of the
array. That is, instead of calling the function registered to the
tracepoint, it would call a stub function in its place.
When RDMA device has 255 ports, loop iterator i overflows. Due to which
cm_add_one() port iterator loops infinitely. Use core provided port
iterator to avoid the infinite loop.
Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation") Link: https://lore.kernel.org/r/20210127150010.1876121-9-leon@kernel.org Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
In the end of __iommu_map, It alway call iotlb_sync_map.
This patch moves iotlb_sync_map out from __iommu_map since it is
unnecessary to call this for each sg segment especially iotlb_sync_map
is flush tlb all currently. Add a little helper _iommu_map for this.
Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210107122909.16317-2-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Consider an amba driver with a .probe but without a .remove callback (e.g.
pl061_gpio_driver). The function amba_probe() is called to bind a device
and so dev_pm_domain_attach() and others are called. As there is no remove
callback amba_remove() isn't called at unbind time however and so calling
dev_pm_domain_detach() is missed and the pm domain keeps active.
To fix this always use the core driver callbacks and handle missing amba
callbacks there. For probe refuse registration as a driver without probe
doesn't make sense.
Fixes: 7cfe249475fd ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210126165835.687514-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Store DMA mapping data in geni_i2c_dev struct to enhance DMA mapping
data scope. For example during shutdown callback to unmap DMA mapping,
this stored DMA mapping data can be used to call geni_se_tx_dma_unprep
and geni_se_rx_dma_unprep functions.
Add two helper functions geni_i2c_rx_msg_cleanup and
geni_i2c_tx_msg_cleanup to unwrap the things after rx/tx FIFO/DMA
transfers, so that the same can be used in geni_i2c_stop_xfer()
function during shutdown callback.
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
It was observed that decompressor running on hardware implementing ARM v8.2
Load/Store Multiple Atomicity and Ordering Control (LSMAOC), say, as guest,
would stuck just after:
Uncompressing Linux... done, booting the kernel.
The reason is that it clears nTLSMD bit when disabling caches:
nTLSMD, bit [3]
When ARMv8.2-LSMAOC is implemented:
No Trap Load Multiple and Store Multiple to
Device-nGRE/Device-nGnRE/Device-nGnRnE memory.
0b0 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are trapped and
generate a stage 1 Alignment fault.
0b1 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are not trapped.
This bit is permitted to be cached in a TLB.
This field resets to 1.
Otherwise:
Reserved, RES1
So as effect we start getting traps we are not quite ready for.
Looking into history it seems that mask used for SCTLR clear came from
the similar code for ARMv4, where bit[3] is the enable/disable bit for
the write buffer. That not applicable to ARMv7 and onwards, so retire
that bit from the masks.
Fixes: 7d09e85448dfa78e3e58186c934449aaf6d49b50 ("[ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
./arch/powerpc/include/asm/paravirt.h:83:44: error: implicit declaration
of function 'smp_processor_id'; did you mean 'raw_smp_processor_id'?
smp_processor_id is defined in linux/smp.h but it is not included.
The build error happens only when the patch is applied to 5.3 kernel but
it only works by chance in mainline.
Fixes: ca3f969dcb11 ("powerpc/paravirt: Use is_kvm_guest() in vcpu_is_preempted()") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210120132838.15589-1-msuchanek@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
When CONFIG_IRQ_TIME_ACCOUNTING and CONFIG_VIRT_CPU_ACCOUNTING_GEN, powerpc
does not enable "sched_clock_irqtime" and can not utilize irq time
accounting.
Like x86, powerpc does not use the sched_clock_register() interface. So it
needs an dedicated call to enable_sched_clock_irqtime() to enable irq time
accounting.
Fixes: 518470fe962e ("powerpc: Add HAVE_IRQ_TIME_ACCOUNTING") Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
[mpe: Add fixes tag] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1603349479-26185-1-git-send-email-kernelfans@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
We currently just percolate the return value from analyze_instr()
to the caller of emulate_step(), especially if it is a -1.
For one particular case (opcode = 4) for instructions that aren't
currently emulated, we are returning 'should not be single-stepped'
while we should have returned 0 which says 'did not emulate, may
have to single-step'.
Fixes: 930d6288a26787 ("powerpc: sstep: Add support for maddhd, maddhdu, maddld instructions") Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/161157999039.64773.14950289716779364766.stgit@thinktux.local Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
These are only used locally. It fixes these W=1 compile errors :
../arch/powerpc/kvm/powerpc.c:1521:5: error: no previous prototype for ‘kvmppc_get_vmx_dword’ [-Werror=missing-prototypes]
1521 | int kvmppc_get_vmx_dword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1539:5: error: no previous prototype for ‘kvmppc_get_vmx_word’ [-Werror=missing-prototypes]
1539 | int kvmppc_get_vmx_word(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1557:5: error: no previous prototype for ‘kvmppc_get_vmx_hword’ [-Werror=missing-prototypes]
1557 | int kvmppc_get_vmx_hword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1575:5: error: no previous prototype for ‘kvmppc_get_vmx_byte’ [-Werror=missing-prototypes]
1575 | int kvmppc_get_vmx_byte(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction mmio emulation with analyse_instr() input") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-19-clg@kaod.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Currently, polling a umad device will always works, even if the device was
disassociated. A disassociated device should immediately return EPOLLERR
from poll(). Otherwise userspace is endlessly hung on poll() with no idea
that the device has been removed from the system.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/20210125121339.837518-3-leon@kernel.org Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
MAD message received by the user has EINVAL error in all flows
including when the device is disassociated. That makes it impossible
for the applications to treat such flow differently.
Change it to return EIO, so the applications will be able to perform
disassociation recovery.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/20210125121339.837518-2-leon@kernel.org Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The cited commit disallowed creating any QP which isn't raw ethernet, reg
umr or the special UD qp for testing WC, this proved too strict.
While modify can't be done (no GIDS/GID table for example) just creating a
QP is okay.
This patch partially reverts the bellow mentioned commit and places the
restriction at the modify QP stage and not at the creation. DEVX commands
should be used to manipulate such QPs.
Fixes: 42caf9cb5937 ("RDMA/mlx5: Allow only raw Ethernet QPs when RoCE isn't enabled") Link: https://lore.kernel.org/r/20210125120709.836718-1-leon@kernel.org Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Currently gather->end is "unsigned long" which may be overflow in
arch32 in the corner case: 0xfff00000 + 0x100000(iova + size).
Although it doesn't affect the size(end - start), it affects the checking
"gather->end < end"
This patch changes this "end" to the real end address
(end = start + size - 1). Correspondingly, update the length to
"end - start + 1".
Fixes: a7d20dc19d9e ("iommu: Introduce struct iommu_iotlb_gather for batching TLB flushes") Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210107122909.16317-5-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The "pmb" pointer is freed at the start of the function and then freed
again in the error handling code.
Link: https://lore.kernel.org/r/YA6E8rO51hE56SVw@mwanda Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
With my version of GCC 9.3.1 the ".cold" subfunctions no longer have a
numbered suffix, so the trailing period is no longer there.
Presumably this doesn't yet trigger a user-visible bug since most of the
subfunction detection logic is duplicated. I only found it when
testing vmlinux.o validation.
The JMP_NOSPEC macro branches to __x86_retpoline_*() rather than the
__x86_indirect_thunk_*() wrappers used by C code. Detect jumps to
__x86_retpoline_*() as retpoline dynamic jumps.
Presumably this doesn't trigger a user-visible bug. I only found it
when testing vmlinux.o validation.
When SCU is not ready and CONFIG_DEBUG_SHIRQ=y we got deferred probe followed
by fired test IRQ which immediately makes kernel panic. Fix this by delaying
IRQ handler registration till SCU is ready.
Fixes: 80ae679b8f86 ("watchdog: intel-mid_wdt: Convert to use new SCU IPC API") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Release the buffer_head before returning error code in
do_isofs_readdir() and isofs_find_entry().
Fixes: 2deb1acc653c ("isofs: fix access to unallocated memory when reading corrupted filesystem") Link: https://lore.kernel.org/r/20210118120455.118955-1-bianpan2016@163.com Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Sometimes regulator_get() gets called twice for the same supply on the
same device. This may happen e.g. when a framework / library is used
which uses the regulator; and the driver itself also needs to enable
the regulator in some cases where the framework will not enable it.
Commit ff268b56ce8c ("regulator: core: Don't spew backtraces on
duplicate sysfs") already takes care of the backtrace which would
trigger when creating a duplicate consumer symlink under
/sys/class/regulator/regulator.%d in this scenario.
Commit c33d442328f5 ("debugfs: make error message a bit more verbose")
causes a new error to get logged in this scenario:
[ 26.938425] debugfs: Directory 'wm5102-codec-MICVDD' with parent 'spi-WM510204:00-MICVDD' already present!
There is no _nowarn variant of debugfs_create_dir(), but we can detect
and avoid this problem by checking the return value of the earlier
sysfs_create_link_nowarn() call.
Add a check for the earlier sysfs_create_link_nowarn() failing with
-EEXIST and skip the debugfs_create_dir() call in that case, avoiding
this error getting logged.
Fixes: c33d442328f5 ("debugfs: make error message a bit more verbose") Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210122183250.370571-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The IRQ=0 could be a valid interrupt number in kernel because interrupt
numbers are virtual in a modern kernel. Hence fix the interrupt usage in
a case if interrupt is unavailable by not overriding the interrupt number
which is used by the driver.
Note that currently Nexus 7 is the only know device which uses SMB347
kernel diver and it has a properly working interrupt, hence this patch
doesn't fix any real problems, it's a minor cleanup/improvement.
Fixes: 99298de5df92 ("power: supply: smb347-charger: Replace mutex with IRQ disable/enable") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The IRQ handler calls mod_delayed_work() on power->vbus_detect. However,
that work item is not initialized until after the IRQs are enabled. If
an IRQ is already pending when the driver is probed, the driver calls
mod_delayed_work() on an uninitialized work item, which causes an oops.
Fixes: bcfb7ae3f50b ("power: supply: axp20x_usb_power: Only poll while offline") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
As can be seen from the "(*)" markers above, almost all the call-chains are
atomic. The only exception, marked with "(+)", is a PCI ->remove() and
PM_OPS ->suspend() cold path. Thus, pass GFP_ATOMIC to the libsas port
event notifier.
Note, the now-replaced libsas APIs used in_interrupt() to implicitly decide
which memory allocation type to use. This was only partially correct, as
it fails to choose the correct GFP flags when just preemption or interrupts
are disabled. Such buggy code paths are marked with "(@)" in the call
chains above.
Link: https://lore.kernel.org/r/20210118100955.1761652-8-a.darwish@linutronix.de Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
projects / mirror_ubuntu-hirsute-kernel.git / log