Josef Bacik [Wed, 24 Apr 2013 20:32:55 +0000 (16:32 -0400)]
Btrfs: fix extent logging with O_DIRECT into prealloc
This is the same as the fix from commit
Btrfs: fix bad extent logging
but for O_DIRECT. I missed this when I fixed the problem originally, we were
still using the em for the orig_start and orig_block_len, which would be the
merged extent. We need to use the actual extent from the on disk file extent
item, which we have to lookup to make sure it's ok to nocow anyway so just pass
in some pointers to hold this info. Thanks,
Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Tue, 23 Apr 2013 18:17:42 +0000 (14:17 -0400)]
Btrfs: fix all callers of read_tree_block
We kept leaking extent buffers when mounting a broken file system and it turns
out it's because not everybody uses read_tree_block properly. You need to check
and make sure the extent_buffer is uptodate before you use it. This patch fixes
everybody who calls read_tree_block directly to make sure they check that it is
uptodate and free it and return an error if it is not. With this we no longer
leak EB's when things go horribly wrong. Thanks,
Josef Bacik [Tue, 23 Apr 2013 16:55:21 +0000 (12:55 -0400)]
Btrfs: only exclude supers in the range of our block group
If we fail to load block groups halfway through we can leave extent_state's on
the excluded tree. This is because we just lookup the supers and add them to
the excluded tree regardless of which block group we are looking at currently.
This is a problem because we remove the excluded extents for the range of the
block group only, so if we don't ever load a block group for one of the excluded
extents we won't ever free it. This fixes the problem by only adding excluded
extents if it falls in the block group range we care about. With this patch
we're no longer leaking space when we fail to read all of the block groups.
Thanks,
Josef Bacik [Tue, 23 Apr 2013 15:30:14 +0000 (11:30 -0400)]
Btrfs: add tree block level sanity check
With a users corrupted fs I was getting weird behavior and panics and it turns
out it was because one of his tree blocks had a bogus header level. So add this
to the sanity checks in the endio handler for tree blocks. Thanks,
Josef Bacik [Tue, 23 Apr 2013 14:53:18 +0000 (10:53 -0400)]
Btrfs: don't BUG_ON() in btrfs_num_copies
A user sent me a btrfs-image that was panicing because of some corruption. This
is because we pass in a bogus value to btrfs_num_copies, and it panics. Instead
just return 1. We only call btrfs_num_copies to see if there are other copies
to try and read for things, so if we just return 1 it will make the callers exit
out with an appropriate error value. Thanks,
Josef Bacik [Sat, 20 Apr 2013 14:18:27 +0000 (10:18 -0400)]
Btrfs: don't call readahead hook until we have read the entire eb
Martin Steigerwald reported a BUG_ON() where we were given a bogus bytenr to
map. Turns out he is using > PAGESIZE leafsizes. The readahead stuff is called
every time we do a completion, but we may not have finished reading in all the
pages, so the bytenr we read off the node could be completely bogus. Fix this
by only calling the readahead hook once all pages have been read in. Thanks,
Reported-by: Martin Steigerwald <Martin@lichtvoll.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Sat, 20 Apr 2013 03:45:33 +0000 (23:45 -0400)]
Btrfs: deal with bad mappings in btrfs_map_block
Martin Steigerwald reported a BUG_ON() in btrfs_map_block where we didn't find
a chunk for a particular block we were trying to map. This happened because the
block was bogus. We shouldn't be BUG_ON()'ing in this case, just print a
message and return an error. This came from reada_add_block and it appears to
deal with an error fine so we should be good there. Thanks,
Reported-by: Martin Steigerwald <Martin@lichtvoll.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Fri, 19 Apr 2013 18:37:26 +0000 (14:37 -0400)]
Btrfs: fix possible infinite loop in slow caching
So I noticed there is an infinite loop in the slow caching code. If we return 1
when we hit the end of the tree, so we could end up caching the last block group
the slow way and suddenly we're looping forever because we just keep
re-searching and trying again. Fix this by only doing btrfs_next_leaf() if we
don't need_resched(). Thanks,
Josef Bacik [Wed, 17 Apr 2013 16:16:59 +0000 (12:16 -0400)]
Btrfs: fix lockdep warning
The locking order for stuff is
__sb_start_write
ordered_mutex
but with sync() we don't do __sb_start_write for some strange reason, which
means that our iput in wait_ordered_extents could start a transaction which does
the __sb_start_write while we're holding the ordered_mutex. Fix this by using
delayed iput in sync. Thanks,
Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Wang Shilong [Wed, 17 Apr 2013 14:49:51 +0000 (14:49 +0000)]
Btrfs: add all ioctl checks before user change for quota operations
Since all the quota configurations are loaded in memory, and we can
have ioctl checks before operating in the disk. It is safe to do such
things because qgroup_ioctl_lock is held outside.
Without these extra checks firstly, it should be ok to do user change
for quota operations. For example:
if we want to add an existed qgroup, we will do:
->add_qgroup_item()
->add_qgroup_rb()
add_qgroup_item() will return -EEXIST to us, however, qgroups are all
in memory, why not check them in memory firstly.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Stefan Behrens [Wed, 17 Apr 2013 09:11:47 +0000 (09:11 +0000)]
Btrfs: clear received_uuid field for new writable snapshots
For created snapshots, the full root_item is copied from the source
root and afterwards selectively modified. The current code forgets
to clear the field received_uuid. The only problem is that it is
confusing when you look at it with 'btrfs subv list', since for
writable snapshots, the contents of the snapshot can be completely
unrelated to the previously received snapshot.
The receiver ignores such snapshots anyway because he also checks
the field stransid in the root_item and that value used to be reset
to zero for all created snapshots.
This commit changes two things:
- clear the received_uuid field for new writable snapshots.
- don't clear the send/receive related information like the stransid
for read-only snapshots (which makes them useable as a parent for
the automatic selection of parents in the receive code).
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Wed, 17 Apr 2013 14:17:05 +0000 (10:17 -0400)]
Btrfs: don't force pages under writeback to finish when aborting
Dave reported a BUG_ON() that happened in end_page_writeback() after an abort.
This happened because we unconditionally call end_page_writeback() in the endio
case, which is right. However when we abort the transaction we will call
end_page_writeback() on any writeback pages we find, which is wrong. We need to
lock the page and wait on page writeback to complete if it is. There is nothing
unsafe about this since we are discarding the transaction anyway. Thanks,
Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Liu Bo [Tue, 16 Apr 2013 09:20:28 +0000 (09:20 +0000)]
Btrfs: return error when we specify wrong start to defrag
We need such a sanity check for wrong start when we defrag a file, otherwise,
even with a wrong start that's larger than file size, we can end up changing
not only inode's force compress flag but also FS's incompat flags.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Vincent [Tue, 16 Apr 2013 08:15:25 +0000 (08:15 +0000)]
Btrfs: fix reada debug code compilation
This fixes the following errors:
fs/btrfs/reada.c: In function ‘btrfs_reada_wait’:
fs/btrfs/reada.c:958:42: error: invalid operands to binary < (have ‘atomic_t’ and ‘int’)
fs/btrfs/reada.c:961:41: error: invalid operands to binary < (have ‘atomic_t’ and ‘int’)
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Chris Mason <chris.mason@fusionio.com> Cc: linux-btrfs@vger.kernel.org Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
>From the perspective of users, qgroup's referenced or exclusive
is negative,but user can not continue to write data! a workaround
way is to cast u64 to s64 when doing qgroup reservation.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Jan Schmidt [Sat, 13 Apr 2013 13:19:55 +0000 (13:19 +0000)]
Btrfs: fix unlock after free on rewinded tree blocks
When tree_mod_log_rewind decides to make a copy of the current tree buffer
for its modifications, it subsequently freed the buffer before unlocking it.
Obviously, those operations are required in reverse order.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Jan Schmidt [Sat, 13 Apr 2013 13:19:54 +0000 (13:19 +0000)]
Btrfs: fix accessing the root pointer in tree mod log functions
The tree mod log functions were accessing root->node->... directly, without
use of btrfs_root_node() or explicit rcu locking. This could lead to an
extent buffer reference being leaked and another reference being freed too
early when preemtion was enabled.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Jan Schmidt [Sat, 13 Apr 2013 13:19:53 +0000 (13:19 +0000)]
Btrfs: fix tree mod log regression on root split operations
Commit d9abbf1c changed tree mod log locking around ROOT_REPLACE operations.
When a tree root is split, however, we were logging removal of all elements
from the root node before logging removal of half of the elements for the
split operation. This leads to a BUG_ON when rewinding.
This commit removes the erroneous logging of removal of all elements.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Btrfs: use a lock to protect incompat/compat flag of the super block
The following case will make the incompat/compat flag of the super block
be recovered.
Task1 |Task2
flags = btrfs_super_incompat_flags(); |
|flags = btrfs_super_incompat_flags();
flags |= new_flag1; |
|flags |= new_flag2;
btrfs_set_super_incompat_flags(flags); |
|btrfs_set_super_incompat_flags(flags);
the new_flag1 is recovered.
In order to avoid this problem, we introduce a lock named super_lock into
the btrfs_fs_info structure. If we want to update incompat/compat flags
of the super block, we must hold it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The new mount option is set after parsing the remount arguments,
so it is wrong that checking the autodefrag is close or not at
btrfs_remount_prepare(). Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Wang Shilong [Fri, 12 Apr 2013 12:12:17 +0000 (12:12 +0000)]
Btrfs: add a rb_tree to improve performance of ulist search
Walking backref tree and btrfs quota rely on ulist very much.
This patch tries to use rb_tree to speed up search time.
The original code always checks whether an element
exists before adding a new element, however it costs O(n).
I try to add a rb_tree in the ulist,this is only used to speed up
search. I also do some measurements with quota enabled.
fsstress -p 4 -n 10000
Without this path:
real 0m51.058s 2m4.745s 1m28.222s 1m5.137s
user 0m0.035s 0m0.041s 0m0.105s 0m0.100s
sys 0m12.009s 0m11.246s 0m10.901s 0m10.999s 0m11.287s
With this path:
real 0m55.295s 0m50.960s 1m2.214s 0m48.273s
user 0m0.053s 0m0.095s 0m0.135s 0m0.107s
sys 0m7.766s 0m6.013s 0m6.319s 0m6.030s 0m6.532s
After applying the patch,the execute time is down by ~42%.(11.287s->6.532s)
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Stefan Behrens [Wed, 10 Apr 2013 17:10:52 +0000 (17:10 +0000)]
Btrfs: allow omitting stream header and end-cmd for btrfs send
Two new flags are added to allow omitting the stream header and the
end command for btrfs send streams. This is used in cases where you
send multiple snapshots back-to-back in one stream.
This used to be encoded like this (with 2 snapshots in this example):
<stream header> + <sequence of commands> + <end cmd> +
<stream header> + <sequence of commands> + <end cmd> + EOF
The new format (if the two new flags are used) is this one:
<stream header> + <sequence of commands> +
<sequence of commands> + <end cmd>
Note that the currently existing receivers treat <end cmd> only as
an indication that a new <stream header> is following. This means,
you can just skip the sequence <end cmd> <stream header> without
loosing compatibility. As long as an EOF is following, the currently
existing receivers handle the new format (if the two new flags are
used) exactly as the old one.
So what is the benefit of this change? The goal is to be able to use
a single stream (one TCP connection) to multiplex a request/response
handshake plus Btrfs send streams, all in the same stream. In this
case you cannot evaluate an EOF condition as an end of the Btrfs send
stream. You need something else, and the <end cmd> is just perfect
for this purpose.
The summary is:
The format change is driven by the need to send several Btrfs send
streams over a single TCP connections, with the ability for a repeated
request/response handshake in the middle. And this format change does
not break any existing tool, it is completely compatible.
You could compare the old behaviour of the Btrfs send stream to the
one of ftp where you need a seperate request/response channel and
newly opened data transfer channels for each file, while the new
behaviour is more like http using a single stream for everything.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Wang Shilong [Sun, 7 Apr 2013 10:50:20 +0000 (10:50 +0000)]
Btrfs: fix a warning when updating qgroup limit
Step to reproduce:
mkfs.btrfs <disk>
mount <disk> <mnt>
btrfs quota enable <mnt>
btrfs qgroup limit 0/1 <mnt>
dmesg
If the relative qgroup dosen't exist, flag 'BTRFS_QGROUP_STATUS_
FLAG_INCONSISTENT' will be set, and print the noise message.
This is wrong, we can just move find_qgroup_rb() before
update_qgroup_limit_item().this dosen't change the logic of the
function. But it can avoid unnecessary noise message and wrong set of flag.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Wang Shilong [Sun, 7 Apr 2013 10:50:18 +0000 (10:50 +0000)]
Btrfs: fix missing check before creating a qgroup relation
Step to reproduce:
mkfs.btrfs <disk>
mount <disk> <mnt>
btrfs quota enable <mnt>
btrfs qgroup assign 0/1 1/1 <mnt>
umount <mnt>
btrfs-debug-tree <disk> | grep QGROUP
If we want to add a qgroup relation, we should gurantee that
'src' and 'dst' exist, otherwise, such qgroup relation should
not be allowed to create.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Wang Shilong [Sun, 7 Apr 2013 10:50:17 +0000 (10:50 +0000)]
Btrfs: remove some unnecessary spin_lock usages
We use mutex lock to protect all the user change operations.
So when we are calling find_qgroup_rb() to check whether qgroup
exists, we don't have to hold spin_lock.
Besides, when enabling/disabling quota, it must be single thread
when operations come here. spin lock must be firstly used to
clear quota_root when disabling quota, while enabling quota, spin
lock must be used to complete the last assign work.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Wang Shilong [Sun, 7 Apr 2013 10:50:16 +0000 (10:50 +0000)]
Btrfs: introduce a mutex lock for btrfs quota operations
The original code has one spin_lock 'qgroup_lock' to protect quota
configurations in memory. If we want to add a BTRFS_QGROUP_INFO_KEY,
it will be added to Btree firstly, and then update configurations in
memory,however, a race condition may happen between these operations.
For example:
->add_qgroup_info_item()
->add_qgroup_rb()
For the above case, del_qgroup_info_item() may happen just before
add_qgroup_rb().
What's worse, when we want to add a qgroup relation:
->add_qgroup_relation_item()
->add_qgroup_relations()
We don't have any checks whether 'src' and 'dst' exist before
add_qgroup_relation_item(), a race condition can also happen for
the above case.
To avoid race condition and have all the necessary checks, we introduce
a mutex lock 'qgroup_ioctl_lock', and we make all the user change operations
protected by the mutex lock.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Zach Brown [Tue, 2 Apr 2013 21:02:16 +0000 (21:02 +0000)]
btrfs: abort unlink trans in missed error case
__btrfs_unlink_inode() aborts its transaction when it sees errors after
it removes the directory item. But it missed the case where
btrfs_del_dir_entries_in_log() returns an error. If this happens then
the unlink appears to fail but the items have been removed without
updating the directory size. The directory then has leaked bytes in
i_size and can never be removed.
Adding the missing transaction abort at least makes this failure
consistent with the other failure cases.
I noticed this while reading the code after someone on irc reported
having a directory with i_size but no entries. I tested it by forcing
btrfs_del_dir_entries_in_log() to return -ENOMEM.
Signed-off-by: Zach Brown <zab@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Eric Sandeen [Thu, 4 Apr 2013 20:45:08 +0000 (20:45 +0000)]
btrfs: ignore device open failures in __btrfs_open_devices
This:
# mkfs.btrfs /dev/sdb{1,2} ; wipefs -a /dev/sdb1; mount /dev/sdb2 /mnt/test
would lead to a blkdev open/close mismatch when the mount fails, and
a permanently busy (opened O_EXCL) sdb2:
# wipefs -a /dev/sdb2
wipefs: error: /dev/sdb2: probing initialization failed: Device or resource busy
It's because btrfs_open_devices() may open some devices, fail on
the last one, and return that failure stored in "ret." The mount
then fails, but the caller then does not clean up the open devices.
Chris assures me that:
"btrfs_open_devices just means: go off and open every bdev you can from
this uuid. It should return success if we opened any of them at all."
So change the logic to ignore any open failures; just skip processing
of that device. Later on it's decided whether we have enough devices
to continue.
Reported-by: Jan Safranek <jsafrane@redhat.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Btrfs: improve the performance of the csums lookup
It is very likely that there are several blocks in bio, it is very
inefficient if we get their csums one by one. This patch improves
this problem by getting the csums in batch.
According to the result of the following test, the execute time of
__btrfs_lookup_bio_sums() is down by ~28%(300us -> 217us).
# dd if=<mnt>/file of=/dev/null bs=1M count=1024
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Fri, 5 Apr 2013 20:51:15 +0000 (16:51 -0400)]
Btrfs: fix bad extent logging
A user sent me a btrfs-image of a file system that was panicing on mount during
the log recovery. I had originally thought these problems were from a bug in
the free space cache code, but that was just a symptom of the problem. The
problem is if your application does something like this
[prealloc][prealloc][prealloc]
the internal extent maps will merge those all together into one extent map, even
though on disk they are 3 separate extents. So if you go to write into one of
these ranges the extent map will be right since we use the physical extent when
doing the write, but when we log the extents they will use the wrong sizes for
the remainder prealloc space. If this doesn't happen to trip up the free space
cache (which it won't in a lot of cases) then you will get bogus entries in your
extent tree which will screw stuff up later. The data and such will still work,
but everything else is broken. This patch fixes this by not allowing extents
that are on the modified list to be merged. This has the side effect that we
are no longer adding everything to the modified list all the time, which means
we now have to call btrfs_drop_extents every time we log an extent into the
tree. So this allows me to drop all this speciality code I was using to get
around calling btrfs_drop_extents. With this patch the testcase I've created no
longer creates a bogus file system after replaying the log. Thanks,
Josef Bacik [Thu, 4 Apr 2013 18:31:27 +0000 (14:31 -0400)]
Btrfs: log ram bytes properly
When logging changed extents I was logging ram_bytes as the current length,
which isn't correct, it's supposed to be the ram bytes of the original extent.
This is for compression where even if we split the extent we need to know the
ram bytes so when we uncompress the extent we know how big it will be. This was
still working out right with compression for some reason but I think we were
getting lucky. It was definitely off for prealloc which is why I noticed it,
btrfsck was complaining about it. With this patch btrfsck no longer complains
after a log replay. Thanks,
Josef Bacik [Thu, 4 Apr 2013 15:55:49 +0000 (11:55 -0400)]
Btrfs: don't wait on ordered extents if we have a trans open
Dave was hitting a lockdep warning because we're now properly taking the ordered
operations mutex in the ordered wait stuff. This is because some cases we will
have a trans handle when we are flushing delalloc space, but we can't wait on
ordered extents because we could potentially deadlock, so fix this by not doing
the wait if we have a trans handle. Thanks
Reported-and-tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Tue, 2 Apr 2013 16:40:42 +0000 (12:40 -0400)]
Btrfs: fix error handling in make/read block group
I noticed that we will add a block group to the space info before we add it to
the block group cache rb tree, so we could potentially allocate from the block
group before it's able to be searched for. I don't think this is too much of
a problem, the race window is microscopic, but just in case move the tree
insertion to above the space info linking. This makes it easier to adjust the
error handling as well, so we can remove a couple of BUG_ON(ret)'s and have real
error handling setup for these scenarios. Thanks,
Wang Shilong [Sun, 31 Mar 2013 10:36:37 +0000 (10:36 +0000)]
Btrfs: fix double free in the iterate_extent_inodes()
If btrfs_find_all_roots() fails, 'roots' has been freed or 'roots'
fails to allocate. We don't need to free it outside btrfs_find_all_roots()
again.Fix it.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Tue, 2 Apr 2013 00:36:28 +0000 (20:36 -0400)]
Btrfs: compare relevant parts of delayed tree refs
A user reported a panic while running a balance. What was happening was he was
relocating a block, which added the reference to the relocation tree. Then
relocation would walk through the relocation tree and drop that reference and
free that block, and then it would walk down a snapshot which referenced the
same block and add another ref to the block. The problem is this was all
happening in the same transaction, so the parent block was free'ed up when we
drop our reference which was immediately available for allocation, and then it
was used _again_ to add a reference for the same block from a different
snapshot. This resulted in something like this in the delayed ref tree
as you can see the ref_root's don't match, because when we inc the ref we use
the header owner, which is the original tree the block belonged to, instead of
the data reloc tree. Then when we remove the extent we use the reloc tree
objectid. But none of this matters, since it is a shared reference which means
only the parent matters. When the delayed ref stuff runs it adds all the
increments first, and then does all the drops, to make sure that we don't delete
the ref if we net a positive ref count. But tree blocks aren't allowed to have
multiple refs from the same block, so this panics when it tries to add the
second ref. We need the add and the drop to cancel each other out in memory so
we only do the final add.
So to fix this we need to adjust how the delayed refs are added to the tree.
Only the ref_root matters when it is a normal backref, and only the parent
matters when it is a shared backref. So make our decision based on what ref
type we have. This allows us to keep the ref_root in memory in case anybody
wants to use it for something else, and it allows the delayed refs to be merged
properly so we don't end up with this panic.
With this patch the users image no longer panics on mount, and it has a clean
fsck after a normal mount/umount cycle. Thanks,
Cc: stable@vger.kernel.org Reported-by: Roman Mamedov <rm@romanrm.ru> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Mon, 1 Apr 2013 15:23:58 +0000 (11:23 -0400)]
Btrfs: fix infinite loop when we abort on mount
Testing my enospc log code I managed to abort a transaction during mount, which
put me into an infinite loop. This is because of two things, first we don't
reset trans_no_join if we abort during transaction commit, which will force
anybody trying to start a transaction to just loop endlessly waiting for it to
be set to 0. But this is still just a symptom, the second issue is we don't set
the fs state to error during errors on mount. This is because we don't want to
do the flip read only thing during mount, but we still really want to set the fs
state to an error to keep us from even getting to the trans_no_join check. So
fix both of these things, make sure to reset trans_no_join if we abort during a
commit, and make sure we set the fs state to error no matter if we're mounting
or not. This should keep us from getting into this infinite loop again.
Thanks,
Wang Shilong [Thu, 28 Mar 2013 11:34:41 +0000 (11:34 +0000)]
Btrfs: fix a warning when disabling quota
Steps to reproduce:
mkfs.btrfs <disk>
mount <disk> <mnt>
btrfs quota enable <mnt>
btrfs sub create <mnt>/subv
i=1
while [ $i -le 10000 ]
do
dd if=/dev/zero of=<mnt>/subv/data_$i bs=1K count=1
i=$(($i+1))
if [ $i -eq 500 ]
then
btrfs quota disable $mnt
fi
done
dmesg
Obviously, this warn_on() is unnecessary, and it will be easily triggered.
Just remove it.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
David Sterba [Fri, 22 Mar 2013 18:12:51 +0000 (18:12 +0000)]
btrfs: make subvol creation/deletion killable in the early stages
The subvolume ioctls block on the parent directory mutex that can be
held by other concurrent snapshot activity for a long time. Give the
user at least some chance to get out of this situation by allowing
to send a kill signal.
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
David Sterba [Wed, 20 Mar 2013 13:21:10 +0000 (13:21 +0000)]
btrfs: deprecate subvolrootid mount option
This mount option was a workaround when subvol= assumed path relative
to the default subvolume, not the toplevel one. This was fixed long time
ago and subvolrootid has no effect.
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Simon Kirby [Tue, 19 Mar 2013 22:41:23 +0000 (22:41 +0000)]
Btrfs: Include the device in most error printk()s
With more than one btrfs volume mounted, it can be very difficult to find
out which volume is hitting an error. btrfs_error() will print this, but
it is currently rigged as more of a fatal error handler, while many of
the printk()s are currently for debugging and yet-unhandled cases.
This patch just changes the functions where the device information is
already available. Some cases remain where the root or fs_info is not
passed to the function emitting the error.
This may introduce some confusion with volumes backed by multiple devices
emitting errors referring to the primary device in the set instead of the
one on which the error occurred.
Use btrfs_printk(fs_info, format, ...) rather than writing the device
string every time, and introduce macro wrappers ala XFS for brevity.
Since the function already cannot be used for continuations, print a
newline as part of the btrfs_printk() message rather than at each caller.
Signed-off-by: Simon Kirby <sim@hostway.ca> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
David Sterba [Tue, 12 Mar 2013 15:13:28 +0000 (15:13 +0000)]
btrfs: clean snapshots one by one
Each time pick one dead root from the list and let the caller know if
it's needed to continue. This should improve responsiveness during
umount and balance which at some point waits for cleaning all currently
queued dead roots.
A new dead root is added to the end of the list, so the snapshots
disappear in the order of deletion.
The snapshot cleaning work is now done only from the cleaner thread and the
others wake it if needed.
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Thu, 7 Mar 2013 19:22:04 +0000 (14:22 -0500)]
Btrfs: add a incompatible format change for smaller metadata extent refs
We currently store the first key of the tree block inside the reference for the
tree block in the extent tree. This takes up quite a bit of space. Make a new
key type for metadata which holds the level as the offset and completely removes
storing the btrfs_tree_block_info inside the extent ref. This reduces the size
from 51 bytes to 33 bytes per extent reference for each tree block. In practice
this results in a 30-35% decrease in the size of our extent tree, which means we
COW less and can keep more of the extent tree in memory which makes our heavy
metadata operations go much faster. This is not an automatic format change, you
must enable it at mkfs time or with btrfstune. This patch deals with having
metadata stored as either the old format or the new format so it is easy to
convert. Thanks,
David Sterba [Tue, 12 Mar 2013 14:46:08 +0000 (14:46 +0000)]
btrfs: clean up transaction abort messages
The transaction abort stacktrace is printed only once per module
lifetime, but we'd like to see it each time it happens per mounted
filesystem. Introduce a fs_state flag that records it.
Tweak the messages around abort:
* add error number to the first abort
* print the exact negative errno from btrfs_decode_error
* clean up btrfs_decode_error and callers
* no dots at the end of the messages
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Fri, 15 Mar 2013 13:47:08 +0000 (09:47 -0400)]
Btrfs: add some free space cache tests
We keep hitting bugs in the tree log replay because btrfs_remove_free_space
doesn't account for some corner case. So add a bunch of tests to try and fully
test btrfs_remove_free_space since the only time it is called is during tree log
replay. These tests all finish successfully, so as we find more of these bugs
we need to add to these tests to make sure we don't regress in fixing things.
I've hidden the tests behind a Kconfig option, but they take no time to run so
all btrfs developers should have this turned on all the time. Thanks,
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fix from Olof Johansson:
"A late-arriving fix for musb on OMAP4, resolving an issue where the
musb IP won't be clocked and thus not functional. Small in scope,
most of the lines changed is a longish comment."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
I think we could just move the full vm_iomap_memory() function into
util.h or similar, but I didn't get any reply from anybody actually
using nommu even to this trivial patch, so I'm not going to touch it any
more than required.
Here's the fairly minimal stub to make the nommu case at least
potentially work. It doesn't seem like anybody cares, though.
Olof Johansson [Sat, 27 Apr 2013 00:35:13 +0000 (17:35 -0700)]
Merge tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
One MUSB regression fix that I forgot to send earlier. Without
this MUSB no longer works on omap4 based devices.
* tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Two driver fixes.
One avoids reading any file at a system with a cx25821 board
(fortunately, this is not a common device). The other one prevents
reading after a buffer with ISDB-T devices based on mb86a20s."
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] cx25821: do not expose broken video output streams
[media] mb86a20s: Fix estimate_rate setting
Merge branch 'fixes-3.9-late' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull late parisc fixes from Helge Deller:
"I know it's *very* late in the 3.9 release cycle, but since there
aren't that many people testing the parisc linux kernel, a few (for
our port) critical issues just showed up a few days back for the first
time.
What's in it?
- add missing __ucmpdi2 symbol, which is required for btrfs on 32bit
kernel.
- change kunmap() macro to static inline function. This fixes a
debian/gcc-4.4 build error.
- add locking when doing PTE updates. This fixes random userspace
crashes.
- disable (optional) -mlong-calls compiler option for modules, else
modules can't be loaded at runtime.
- a smart patch by Will Deacon which fixes 64bit put_user() warnings
on 32bit kernel."
* 'fixes-3.9-late' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
parisc: disable -mlong-calls compiler option for kernel modules
parisc: uaccess: fix compiler warnings caused by __put_user casting
parisc: Change kunmap macro to static inline function
parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.
Matt Fleming [Fri, 26 Apr 2013 09:10:55 +0000 (10:10 +0100)]
efivars: only check for duplicates on the registered list
variable_is_present() accesses '__efivars' directly, but when called via
gsmi_init() Michel reports observing the following crash,
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: variable_is_present+0x55/0x170
Call Trace:
register_efivars+0x106/0x370
gsmi_init+0x2ad/0x3da
do_one_initcall+0x3f/0x170
The reason for the crash is that '__efivars' hasn't been initialised nor
has it been registered with register_efivars() by the time the google
EFI SMI driver runs. The gsmi code uses its own struct efivars, and
therefore, a different variable list. Fix the above crash by passing
the registered struct efivars to variable_is_present(), so that we
traverse the correct list.
Reported-by: Michel Lespinasse <walken@google.com> Tested-by: Michel Lespinasse <walken@google.com> Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <matthew.garrett@nebula.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit b0de59b5733d ("TTY: do not update atime/mtime on read/write")
we removed timestamps from tty inodes to fix a security issue and waited
if something breaks. Well, 'w', the utility to find out logged users
and their inactivity time broke. It shows that users are inactive since
the time they logged in.
To revert to the old behaviour while still preventing attackers to
guess the password length, we update the timestamps in one-minute
intervals by this patch.
H. Peter Anvin [Thu, 25 Apr 2013 21:00:22 +0000 (14:00 -0700)]
Merge tag 'efi-urgent' into x86/urgent
* The EFI variable anti-bricking algorithm merged in -rc8 broke booting
on some Apple machines because they implement EFI spec 1.10, which
doesn't provide a QueryVariableInfo() runtime function and the logic
used to check for the existence of that function was insufficient.
Fix from Josh Boyer.
* The anti-bricking algorithm also introduced a compiler warning on
32-bit. Fix from Borislav Petkov.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
User applications running on SMP kernels have long suffered from instability
and random segmentation faults. This patch improves the situation although
there is more work to be done.
One of the problems is the various routines in pgtable.h that update page table
entries use different locking mechanisms, or no lock at all (set_pte_at). This
change modifies the routines to all use the same lock pa_dbit_lock. This lock
is used for dirty bit updates in the interruption code. The patch also purges
the TLB entries associated with the PTE to ensure that inconsistent values are
not used after the page table entry is updated. The UP and SMP code are now
identical.
The change also includes a minor update to the purge_tlb_entries function in
cache.c to improve its efficiency.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de>
parisc: disable -mlong-calls compiler option for kernel modules
CONFIG_MLONGCALLS was introduced in commit ec758f98328da3eb933a25dc7a2eed01ef44d849 to overcome linker issues when linking
huge linux kernels, e.g. with many modules linked in.
But in the kernel module loader there is no support yet for the new relocation
types, which is why modules built with -mlong-calls can't be loaded.
Furthermore, for modules long calls are not really necessary, since we already
use stub sections which resolve long distance calls.
So, let's just disable this compiler option when compiling kernel modules.
Will Deacon [Mon, 22 Apr 2013 12:53:43 +0000 (12:53 +0000)]
parisc: uaccess: fix compiler warnings caused by __put_user casting
When targetting 32-bit processors, __put_user emits a pair of stw
instructions for the 8-byte case. If the type of __val is a pointer, the
marshalling code casts it to the wider integer type of u64, resulting
in the following compiler warnings:
kernel/signal.c: In function 'copy_siginfo_to_user':
kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
[...]
This patch fixes the warnings by removing the marshalling code and using
the correct output modifiers in the __put_{user,kernel}_asm64 macros
so that GCC will allocate the right registers without the need to
extract the two words explicitly.
parisc: Change kunmap macro to static inline function
Change kunmap macro to static inline function to fix build error
compiling drivers/base/dma-buf.c.
Without the change, the following error can occur:
CC drivers/base/dma-buf.o
drivers/base/dma-buf.c: In function 'dma_buf_kunmap':
drivers/base/dma-buf.c:427:46:
error: macro "kunmap" passed 3 arguments, but takes just 1
I believe parisc is the only arch to implement kunmap using a macro.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de>
parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.
The Debian experimental linux source package (3.8.5-1) build fails
with the following errors:
...
MODPOST 2016 modules
ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/md/dm-verity.ko] undefined!
The attached patch resolves this problem. It is based on the s390
implementation of ucmpdi2.c.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by: Helge Deller <deller@gmx.de>
Merge tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpi fix from Linus Walleij:
"This is a last minute revert for the GPIO tree, as Mike Dunn noticed
breakage on some older PXA machines due to moving PXA GPIO initcalls
to the module_init initlevel"
* tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: pxa: set initcall level to module init"
We need to check the runtime sys_table for the EFI version the firmware
specifies instead of just checking for a NULL QueryVariableInfo. Older
implementations of EFI don't have QueryVariableInfo but the runtime is
a smaller structure, so the pointer to it may be pointing off into garbage.
This is apparently the case with several Apple firmwares that support EFI
1.10, and the current check causes them to no longer boot. Fix based on
a suggestion from Matthew Garrett.
Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
arch/x86/boot/compressed/eboot.c: In function ‘setup_efi_vars’:
arch/x86/boot/compressed/eboot.c:269:2: warning: passing argument 1 of ‘efi_call_phys’ makes pointer from integer without a cast [enabled by default]
In file included from arch/x86/boot/compressed/eboot.c:12:0:
/w/kernel/linux/arch/x86/include/asm/efi.h:8:33: note: expected ‘void *’ but argument is of type ‘long unsigned int’
after cc5a080c5d40 ("efi: Pass boot services variable info to runtime
code").
Reported-by: Paul Bolle <pebolle@tiscali.nl> Cc: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
lmo commit c17a6554 (MIPS: page.h: Provide more readable definition for
PAGE_MASK) apparently breaks ioremap of 36-bit addresses on my Alchemy
systems (PCI and PCMCIA) The reason is that in arch/mips/mm/ioremap.c
line 157 (phys_addr &= PAGE_MASK) bits 32-35 are cut off. Seems the
new PAGE_MASK is explicitly 32bit, or one could make it signed instead
of unsigned long.
projects / mirror_ubuntu-disco-kernel.git / log