Christian Gromm [Mon, 27 Jun 2016 13:00:32 +0000 (15:00 +0200)]
staging: most: core: remove debug print
This patch removes the debug print in case an HDM ran out of rx buffers.
This is not needed since the status is reflected in the sysfs
channel_starving flag. Additionally, it prevents the system form slowing
down.
Christian Gromm [Mon, 13 Jun 2016 14:24:25 +0000 (16:24 +0200)]
staging: most: dim2-hdm: fix possible kernel freeze when reusing a dim2 channel
If a DIM2 channel is being closed while it is busy, the channels's status
flag could possibly stay active for this very channel. This causes the
kernel to freeze by the time the channel is opened again.
Christian Gromm [Mon, 13 Jun 2016 14:24:23 +0000 (16:24 +0200)]
staging: most: dim2-hdm: fix race condition when closing a channel
This patch fixes race between the function poison_channel that clears
the state is_initialized and the tasklet function dim2_tasklet_fn that
checks the state is_initialized.
The function aim_register_videodev() uses the variables 'ret' and
'retval' to represent the same value.
This patch removes 'retval' and replaces it with 'ret'. Further, it
replaces the constant return value '-ENODEV' with the result returned by
function video_register_device() in the event something went wrong.
Colin Ian King [Mon, 9 May 2016 22:22:14 +0000 (23:22 +0100)]
staging: speakup: ensure we do not overrun synths array
synth_add allows one to add MAXSYNTHS synths to the synths array;
however it always NULLifies the next synth in the array which
means that on the MAXSYNTHS synth we get an out-of-bounds write of
the NULL to the synths array. Make the synths array MAXSYNTHS + 1
elements in size to allow for the final NULL sentinal to avoid the
out-of-bounds write.
Issue found wit CoverityScan, CID#744671
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the "brd" was already checked for NULL before calling dgnc_do_remap().
the dgnc_do_remap() function was called only
from the dgnc_found_board() and the DGNC_BOARD_MAGIC value
was assigned to "brd->magic" in dgcn_found_board(). So it doesn't
need to check about magic value.
staging: dgnc: remove redundant NULL check for brd
the "brd" value cannot be NULL in dgnc_finalize_board_init().
Because "brd" as a parameter of this function was already
checked for NULL.
the dgnc_finalize_board_init() as a static function was called
only from dgnc_found_board() function and brd->magic value
was assigned once in dgnc_found_board(). So it doesn't need to
check for DGNC_BOARD_MAGIC value.
staging: dgnc: remove useless error value assignment
The "result" variable in dgnc_get_mstat() was initialized with
"-EIO". But if the "ch" is not null, "result" will be set to zero
and if the "ch" is null, dgnc_get_mstat() will return "-ENXIO" as
an error. So "-EIO" error value was useless in dgnc_get_mstat().
The dgnc_block_til_ready() is only used in dgnc_tty_open().
The unit data(struct un_t) was stored into tty->driver_data in dgnc_tty_open().
And also tty and un were tested about NULL so these variables doesn't
need to check for NULL in dgnc_block_til_ready().
wang di [Fri, 22 Jul 2016 02:44:11 +0000 (22:44 -0400)]
staging: lustre: llite: do post work for statahead in readdir case
Increase the post-work for the statahead thread in the readdir
case since it can become very busy.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Fri, 22 Jul 2016 02:44:10 +0000 (22:44 -0400)]
staging: lustre: llite: pass in __u64 pos for ll_dir_read
Some cases we want to preserve the ctx->pos value or use
a different value altogther. So allow the passing in of
a position offset to ll_dir_read.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Fri, 22 Jul 2016 02:44:06 +0000 (22:44 -0400)]
staging: lustre: llite: change done flag in ll_dir_read to bool
Change the done flag from integer to bool.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Fri, 22 Jul 2016 02:44:04 +0000 (22:44 -0400)]
staging: lustre: llite: set next only when needed in ll_dir_read
The variable next needs only to be set when done is false.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Fri, 22 Jul 2016 02:44:03 +0000 (22:44 -0400)]
staging: lustre: llite: reduce indent in ll_dir_read
Instead of making a large chunk of code conditional
based on if a page is valid we reverse the page
validity test and exit the loop if the page is invalid
instead. This allows a section of code to reduce its
indentation one level.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Fri, 22 Jul 2016 02:44:02 +0000 (22:44 -0400)]
staging: lustre: llite: remove debug message in ll_dir_read
Remove debug message and struct ll_inode_info.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Fri, 22 Jul 2016 02:43:58 +0000 (22:43 -0400)]
staging: lustre: lmv: add new lmv structures
Newer lustre version on metadata servers support different
version of lmv magic. This add the new data structures
to handle these new lmv magic versions.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Mon, 11 Jul 2016 13:40:10 +0000 (09:40 -0400)]
staging: lustre: llite: basic port to xattr_handler API
Port the xattr functionality to the new xattr_handler API.
This is smallest changes needed to move to this new API. The
function ll_removexattr can be replaced by generic_removexattr
as well since it also uses the xattr_handler set xattr backend.
To tell the difference between the two cases we test the flag
passed in for XATTR_REPLACE. The ll_getxattr function is
replaced by the generic_getxattr function.
Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Mon, 20 Jun 2016 22:47:50 +0000 (18:47 -0400)]
staging: lustre: llite: break ll_getxattr_common into 2 functions
Split the function ll_getxattr_common into two functions.
The code used for listing xattrs and ll_getxattr_common is
placed into a new function ll_getxattr_list. This allows
ll_listxattr to call directly ll_getxattr_list instead of
going through ll_getxattr_common. This change is needed
for the upcoming VFS move xattr_handler from [s|g]etxattr.
Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The workqueue is being used to run deferred work for the android binder.
The "binder_deferred_workqueue" queues only a single work item and hence
does not require ordering. Also, this workqueue is not being used on a
memory recliam path. Hence, the singlethreaded workqueue has been
replaced with the use of system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
Gustavo Padovan [Thu, 11 Aug 2016 15:26:44 +0000 (12:26 -0300)]
dma-buf/sw_sync: de-stage SW_SYNC
SW_SYNC allows to run tests on the sync_file framework via debugfs on
<debugfs>/sync/sw_sync
Opening and closing the file triggers creation and release of a sync
timeline. To create fences on this timeline the SW_SYNC_IOC_CREATE_FENCE
ioctl should be used. To increment the timeline value use SW_SYNC_IOC_INC.
Gustavo Padovan [Thu, 11 Aug 2016 16:45:53 +0000 (13:45 -0300)]
staging/android: add Doc for SW_SYNC ioctl interface
This interface is hidden from kernel headers and it is intended for use
only for testing. So testers would have to add the ioctl information
internally. This is to prevent misuse of this feature.
v2: take in Eric suggestions for the Documentation
Gustavo Padovan [Thu, 11 Aug 2016 15:26:40 +0000 (12:26 -0300)]
staging/android: do not let userspace trigger WARN_ON
Closing the timeline without waiting all fences to signal is not
a critical failure, it is just bad usage from userspace so avoid
calling WARN_ON in this case.
Laura Abbott [Mon, 8 Aug 2016 16:52:58 +0000 (09:52 -0700)]
staging: android: ion: Get rid of ion_reserve
ion_reserve was supposed to be used to reserve memory in board files.
These days, board files are no more and there are other more controlled
mechanisms for reserving memory. Get rid of this function.
Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Mon, 8 Aug 2016 16:52:56 +0000 (09:52 -0700)]
staging: android: ion: Get rid of map_dma/unmap_dma
The map_dma API interface was designed to generate an sg_table.
Currently, every client just creates the table at allocation time and
then returns the one table. Nothing happens on unmap_dma either.
Just get rid of the API and assign the sg_table directly.
Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Sat, 13 Aug 2016 18:52:38 +0000 (19:52 +0100)]
staging: ks7010: do not dereference priv if priv is null
priv is being dereferenced before a check for it being null
is made, so there is a possibililty a null pointer deference
can occur. Instead, only dereference priv if it is non-null.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Markus Elfring [Sun, 17 Jul 2016 11:38:46 +0000 (13:38 +0200)]
staging: ks7010: Delete unnecessary assignments for buffer variables
A few variables were assigned a null pointer despite of the detail
that they were immediately reassigned by the following statement.
Thus remove such unnecessary assignments.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Mon, 15 Aug 2016 02:01:31 +0000 (19:01 -0700)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui:
- Fix a race condition when updating cooling device, which may lead to
a situation where a thermal governor never updates the cooling
device. From Michele Di Giorgio.
- Fix a zero division error when disabling the forced idle injection
from the intel powerclamp. From Petr Mladek.
- Add suspend/resume callback for intel_pch_thermal thermal driver.
From Srinivas Pandruvada.
- Another two fixes for clocking cooling driver and hwmon sysfs I/F.
From Michele Di Giorgio and Kuninori Morimoto.
[ Hmm. That suspend/resume callback for intel_pch_thermal doesn't look
like a fix, but I'm letting it slide.. - Linus ]
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: clock_cooling: Fix missing mutex_init()
thermal: hwmon: EXPORT_SYMBOL_GPL for thermal hwmon sysfs
thermal: fix race condition when updating cooling device
thermal/powerclamp: Prevent division by zero when counting interval
thermal: intel_pch_thermal: Add suspend/resume callback
Linus Torvalds [Mon, 15 Aug 2016 01:54:37 +0000 (18:54 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"This contains only a single fix for a register corruption problem on
certain types of m68k flat format binaries"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix user a5 register being overwritten
Linus Torvalds [Sun, 14 Aug 2016 02:39:38 +0000 (19:39 -0700)]
Merge tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull h8300 and unicore32 architecture fixes from Guenter Roeck:
"Two patches to fix h8300 and unicore32 builds.
unicore32 builds have been broken since v4.6. The fix has been
available in -next since March of this year.
h8300 builds have been broken since the last commit window. The fix
has been available in -next since June of this year"
* tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
h8300: Add missing include file to asm/io.h
unicore32: mm: Add missing parameter to arch_vma_access_permitted
Linus Torvalds [Sat, 13 Aug 2016 16:56:45 +0000 (09:56 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- an NVMe fix from Gabriel, fixing a suspend/resume issue on some
setups
- addition of a few missing entries in the block queue sysfs
documentation, from Joe
- a fix for a sparse shadow warning for the bvec iterator, from
Johannes
- a writeback deadlock involving raid issuing barriers, and not
flushing the plug when we wakeup the flusher threads. From
Konstantin
- a set of patches for the NVMe target/loop/rdma code, from Roland and
Sagi
* 'for-linus' of git://git.kernel.dk/linux-block:
bvec: avoid variable shadowing warning
doc: update block/queue-sysfs.txt entries
nvme: Suspend all queues before deletion
mm, writeback: flush plugged IO in wakeup_flusher_threads()
nvme-rdma: Remove unused includes
nvme-rdma: start async event handler after reconnecting to a controller
nvmet: Fix controller serial number inconsistency
nvmet-rdma: Don't use the inline buffer in order to avoid allocation for small reads
nvmet-rdma: Correctly handle RDMA device hot removal
nvme-rdma: Make sure to shutdown the controller if we can
nvme-loop: Remove duplicate call to nvme_remove_namespaces
nvme-rdma: Free the I/O tags when we delete the controller
nvme-rdma: Remove duplicate call to nvme_remove_namespaces
nvme-rdma: Fix device removal handling
nvme-rdma: Queue ns scanning after a sucessful reconnection
nvme-rdma: Don't leak uninitialized memory in connect request private data
Guenter Roeck [Thu, 9 Jun 2016 03:11:58 +0000 (20:11 -0700)]
h8300: Add missing include file to asm/io.h
h8300 builds fail with
arch/h8300/include/asm/io.h:9:15: error: unknown type name ‘u8’
arch/h8300/include/asm/io.h:15:15: error: unknown type name ‘u16’
arch/h8300/include/asm/io.h:21:15: error: unknown type name ‘u32’
Guenter Roeck [Mon, 21 Mar 2016 11:20:53 +0000 (04:20 -0700)]
unicore32: mm: Add missing parameter to arch_vma_access_permitted
unicore32 fails to compile with the following errors.
mm/memory.c: In function ‘__handle_mm_fault’:
mm/memory.c:3381: error:
too many arguments to function ‘arch_vma_access_permitted’
mm/gup.c: In function ‘check_vma_flags’:
mm/gup.c:456: error:
too many arguments to function ‘arch_vma_access_permitted’
mm/gup.c: In function ‘vma_permits_fault’:
mm/gup.c:640: error:
too many arguments to function ‘arch_vma_access_permitted’
Linus Torvalds [Fri, 12 Aug 2016 23:28:41 +0000 (16:28 -0700)]
Merge tag 'nfsd-4.8-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Fixes for the dentry refcounting leak I introduced in 4.8-rc1, and for
races in the LOCK code which appear to go back to the big nfsd state
lock removal from 3.17"
* tag 'nfsd-4.8-1' of git://linux-nfs.org/~bfields/linux:
nfsd: don't return an unhashed lock stateid after taking mutex
nfsd: Fix race between FREE_STATEID and LOCK
nfsd: fix dentry refcounting on create
Linus Torvalds [Fri, 12 Aug 2016 23:23:58 +0000 (16:23 -0700)]
Merge tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Two hibernation fixes allowing it to work with the recently added
randomization of the kernel identity mapping base on x86-64 and one
cpufreq driver regression fix.
Specifics:
- Fix the x86 identity mapping creation helpers to avoid the
assumption that the base address of the mapping will always be
aligned at the PGD level, as it may be aligned at the PUD level if
address space randomization is enabled (Rafael Wysocki).
- Fix the hibernation core to avoid executing tracing functions
before restoring the processor state completely during resume
(Thomas Garnier).
- Fix a recently introduced regression in the powernv cpufreq driver
that causes it to crash due to an out-of-bounds array access
(Akshay Adiga)"
* tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / hibernate: Restore processor state before using per-CPU variables
x86/power/64: Always create temporary identity mapping correctly
cpufreq: powernv: Fix crash in gpstate_timer_handler()
Linus Torvalds [Fri, 12 Aug 2016 21:31:10 +0000 (14:31 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"This is bigger than usual - the reason is partly a pent-up stream of
fixes after the merge window and partly accidental. The fixes are:
- five patches to fix a boot failure on Andy Lutomirsky's laptop
- four SGI UV platform fixes
- KASAN fix
- warning fix
- documentation update
- swap entry definition fix
- pkeys fix
- irq stats fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/x2apic, smp/hotplug: Don't use before alloc in x2apic_cluster_probe()
x86/efi: Allocate a trampoline if needed in efi_free_boot_services()
x86/boot: Rework reserve_real_mode() to allow multiple tries
x86/boot: Defer setup_real_mode() to early_initcall time
x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly
x86/boot: Run reserve_bios_regions() after we initialize the memory map
x86/irq: Do not substract irq_tlb_count from irq_call_count
x86/mm: Fix swap entry comment and macro
x86/mm/kaslr: Fix -Wformat-security warning
x86/mm/pkeys: Fix compact mode by removing protection keys' XSAVE buffer manipulation
x86/build: Reduce the W=1 warnings noise when compiling x86 syscall tables
x86/platform/UV: Fix kernel panic running RHEL kdump kernel on UV systems
x86/platform/UV: Fix problem with UV4 BIOS providing incorrect PXM values
x86/platform/UV: Fix bug with iounmap() of the UV4 EFI System Table causing a crash
x86/platform/UV: Fix problem with UV4 Socket IDs not being contiguous
x86/entry: Clarify the RF saving/restoring situation with SYSCALL/SYSRET
x86/mm: Disable preemption during CR3 read+write
x86/mm/KASLR: Increase BRK pages for KASLR memory randomization
x86/mm/KASLR: Fix physical memory calculation on KASLR memory randomization
x86, kasan, ftrace: Put APIC interrupt handlers into .irqentry.text
Linus Torvalds [Fri, 12 Aug 2016 20:55:06 +0000 (13:55 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Misc fixes: a /dev/rtc regression fix, two APIC timer period
calibration fixes, an ARM clocksource driver fix and a NOHZ
power use regression fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hpet: Fix /dev/rtc breakage caused by RTC cleanup
x86/timers/apic: Inform TSC deadline clockevent device about recalibration
x86/timers/apic: Fix imprecise timer interrupts by eliminating TSC clockevents frequency roundoff error
timers: Fix get_next_timer_interrupt() computation
clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered
Thomas Garnier [Thu, 11 Aug 2016 21:49:29 +0000 (14:49 -0700)]
PM / hibernate: Restore processor state before using per-CPU variables
Restore the processor state before calling any other functions to
ensure per-CPU variables can be used with KASLR memory randomization.
Tracing functions use per-CPU variables (GS based on x86) and one was
called just before restoring the processor state fully. It resulted
in a double fault when both the tracing & the exception handler
functions tried to use a per-CPU variable.
Fixes: bb3632c6101b (PM / sleep: trace events for suspend/resume) Reported-and-tested-by: Borislav Petkov <bp@suse.de> Reported-by: Jiri Kosina <jikos@kernel.org> Tested-by: Rafael J. Wysocki <rafael@kernel.org> Tested-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Thomas Garnier <thgarnie@google.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Fri, 12 Aug 2016 20:21:18 +0000 (13:21 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a
perf-cgroups fix and an AUX events fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add enable_box for client MSR uncore
perf/x86/intel/uncore: Fix uncore num_counters
uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions
perf/core: Set cgroup in CPU contexts for new cgroup events
perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash
perf probe ppc64le: Fix probe location when using DWARF
perf probe: Add function to post process kernel trace events
tools: Sync cpufeatures headers with the kernel
toops: Sync tools/include/uapi/linux/bpf.h with the kernel
tools: Sync cpufeatures.h and vmx.h with the kernel
perf probe: Support signedness casting
perf stat: Avoid skew when reading events
perf probe: Fix module name matching
perf probe: Adjust map->reloc offset when finding kernel symbol from map
perf hists: Trim libtraceevent trace_seq buffers
perf script: Add 'bpf-output' field to usage message
Jeff Layton [Thu, 11 Aug 2016 14:37:39 +0000 (10:37 -0400)]
nfsd: don't return an unhashed lock stateid after taking mutex
nfsd4_lock will take the st_mutex before working with the stateid it
gets, but between the time when we drop the cl_lock and take the mutex,
the stateid could become unhashed (a'la FREE_STATEID). If that happens
the lock stateid returned to the client will be forgotten.
Fix this by first moving the st_mutex acquisition into
lookup_or_create_lock_state. Then, have it check to see if the lock
stateid is still hashed after taking the mutex. If it's not, then put
the stateid and try the find/create again.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Tested-by: Alexey Kodanev <alexey.kodanev@oracle.com> Cc: stable@vger.kernel.org # feb9dad5 nfsd: Always lock state exclusively. Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Linus Torvalds [Fri, 12 Aug 2016 19:46:37 +0000 (12:46 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Misc fixes: lockstat fix, futex fix on !MMU systems, big endian fix
for qrwlocks and a race fix for pvqspinlocks"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/pvqspinlock: Fix a bug in qstat_read()
locking/pvqspinlock: Fix double hash race
locking/qrwlock: Fix write unlock bug on big endian systems
futex: Assume all mappings are private on !MMU systems
Linus Torvalds [Fri, 12 Aug 2016 19:39:02 +0000 (12:39 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"A fix for EFI capsules and an SGI UV platform fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/capsule: Allocate whole capsule into virtual memory
x86/platform/uv: Skip UV runtime services mapping in the efi_runtime_disabled case