Eric Dumazet [Fri, 14 Jun 2019 23:22:19 +0000 (16:22 -0700)]
tcp: add tcp_rx_skb_cache sysctl
Instead of relying on rps_needed, it is safer to use a separate
static key, since we do not want to enable TCP rx_skb_cache
by default. This feature can cause huge increase of memory
usage on hosts with millions of sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Thu, 13 Jun 2019 21:06:53 +0000 (21:06 +0000)]
hv_netvsc: Set probe mode to sync
For better consistency of synthetic NIC names, we set the probe mode to
PROBE_FORCE_SYNCHRONOUS. So the names can be aligned with the vmbus
channel offer sequence.
Fixes: af0a5646cb8d ("use the new async probing feature for the hyperv drivers") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Thu, 13 Jun 2019 14:54:04 +0000 (17:54 +0300)]
net: sched: flower: don't call synchronize_rcu() on mask creation
Current flower mask creating code assumes that temporary mask that is used
when inserting new filter is stack allocated. To prevent race condition
with data patch synchronize_rcu() is called every time fl_create_new_mask()
replaces temporary stack allocated mask. As reported by Jiri, this
increases runtime of creating 20000 flower classifiers from 4 seconds to
163 seconds. However, this design is no longer necessary since temporary
mask was converted to be dynamically allocated by commit 2cddd2014782
("net/sched: cls_flower: allocate mask dynamically in fl_change()").
Remove synchronize_rcu() calls from mask creation code. Instead, refactor
fl_change() to always deallocate temporary mask with rcu grace period.
Fixes: 195c234d15c9 ("net: sched: flower: handle concurrent mask insertion") Reported-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Tested-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Anders Roxell [Thu, 13 Jun 2019 11:35:03 +0000 (13:35 +0200)]
net: dsa: fix warning same module names
When building with CONFIG_NET_DSA_REALTEK_SMI and CONFIG_REALTEK_PHY
enabled as loadable modules, we see the following warning:
warning: same module names found:
drivers/net/phy/realtek.ko
drivers/net/dsa/realtek.ko
Rework so the driver name is realtek-smi instead of realtek.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Thu, 13 Jun 2019 10:35:59 +0000 (06:35 -0400)]
sctp: Free cookie before we memdup a new one
Based on comments from Xin, even after fixes for our recent syzbot
report of cookie memory leaks, its possible to get a resend of an INIT
chunk which would lead to us leaking cookie memory.
To ensure that we don't leak cookie memory, free any previously
allocated cookie first.
Change notes
v1->v2
update subsystem tag in subject (davem)
repeat kfree check for peer_random and peer_hmacs (xin)
v2->v3
net->sctp
also free peer_chunks
v3->v4
fix subject tags
v4->v5
remove cut line
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: Xin Long <lucien.xin@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Wed, 12 Jun 2019 20:33:32 +0000 (14:33 -0600)]
net: dsa: microchip: Don't try to read stats for unused ports
If some of the switch ports were not listed in the device tree, due to
being unused, the ksz_mib_read_work function ended up accessing a NULL
dp->slave pointer and causing an oops. Skip checking statistics for any
unused ports.
Fixes: 7c6ff470aa867f53 ("net: dsa: microchip: add MIB counter reading support") Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 15 Jun 2019 02:05:58 +0000 (19:05 -0700)]
Merge branch 'qmi_wwan-fix-QMAP-handling'
Reinhard Speyerer says:
====================
qmi_wwan: fix QMAP handling
This series addresses the following issues observed when using the
QMAP support of the qmi_wwan driver:
1. The QMAP code in the qmi_wwan driver is based on the CodeAurora
GobiNet driver ([1], [2]) which does not process QMAP padding
in the RX path correctly. This causes qmimux_rx_fixup() to pass
incorrect data to the IP stack when padding is used.
2. qmimux devices currently lack proper network device usage statistics.
3. RCU stalls on device disconnect with QMAP activated like this
qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode
Switch qmimux_unregister_device() and qmi_wwan_disconnect() to
use unregister_netdevice_queue() and unregister_netdevice_many()
instead of unregister_netdevice(). This avoids RCU stalls which
have been observed on device disconnect in certain setups otherwise.
Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net>
qmi_wwan: add support for QMAP padding in the RX path
The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet
driver which does not process QMAP padding in the RX path correctly.
Add support for QMAP padding to qmimux_rx_fixup() according to the
description of the rmnet driver.
Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 14 Jun 2019 16:36:51 +0000 (09:36 -0700)]
Merge tag 'mac80211-for-davem-2019-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Various fixes, all over:
* a few memory leaks
* fixes for management frame protection security
and A2/A3 confusion (affecting TDLS as well)
* build fix for certificates
* etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phylink: further mac_config documentation improvements
While reviewing the DPAA2 work, it has become apparent that we need
better documentation about which members of the phylink link state
structure are valid in the mac_config call. Improve this
documentation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Young Xiao [Fri, 14 Jun 2019 07:13:02 +0000 (15:13 +0800)]
nfc: Ensure presence of required attributes in the deactivate_target handler
Check that the NFC_ATTR_TARGET_INDEX attributes (in addition to
NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to
accessing them. This prevents potential unhandled NULL pointer dereference
exceptions which can be triggered by malicious user-mode programs,
if they omit one or both of these attributes.
Signed-off-by: Young Xiao <92siuyang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Biggers [Mon, 10 Jun 2019 20:02:19 +0000 (13:02 -0700)]
cfg80211: fix memory leak of wiphy device name
In wiphy_new_nm(), if an error occurs after dev_set_name() and
device_initialize() have already been called, it's necessary to call
put_device() (via wiphy_free()) to avoid a memory leak.
Reported-by: syzbot+7fddca22578bc67c3fe4@syzkaller.appspotmail.com Fixes: 1f87f7d3a3b4 ("cfg80211: add rfkill support") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The bits of Rx MCS Map in VHT capability were enumerated
with index transform - index i -> (i + 1) bit => nss i. BUG!
while it should be - index i -> (i + 1) bit => (i + 1) nss.
The bug was exposed in commit a53b2a0b1245 ("iwlwifi: mvm: implement VHT
extended NSS support in rs.c"), where iwlwifi started using the
function.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: b0aa75f0b1b2 ("ieee80211: add new VHT capability fields/parsing") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luca Coelho [Wed, 29 May 2019 12:25:29 +0000 (15:25 +0300)]
cfg80211: use BIT_ULL in cfg80211_parse_mbssid_data()
The seen_indices variable is u64 and in other parts of the code we
assume mbssid_index_ie[2] can be up to 45, so we should use the 64-bit
versions of BIT, namely, BIT_ULL().
Reported-by: Dan Carpented <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Yibo Zhao [Fri, 14 Jun 2019 11:01:52 +0000 (19:01 +0800)]
mac80211: only warn once on chanctx_conf being NULL
In multiple SSID cases, it takes time to prepare every AP interface
to be ready in initializing phase. If a sta already knows everything it
needs to join one of the APs and sends authentication to the AP which
is not fully prepared at this point of time, AP's channel context
could be NULL. As a result, warning message occurs.
Even worse, if the AP is under attack via tools such as MDK3 and massive
authentication requests are received in a very short time, console will
be hung due to kernel warning messages.
WARN_ON_ONCE() could be a better way for indicating warning messages
without duplicate messages to flood the console.
Johannes: We still need to address the underlying problem, but we
don't really have a good handle on it yet. Suppress the
worst side-effects for now.
Johannes Berg [Wed, 13 Feb 2019 14:13:30 +0000 (15:13 +0100)]
mac80211: drop robust management frames from unknown TA
When receiving a robust management frame, drop it if we don't have
rx->sta since then we don't have a security association and thus
couldn't possibly validate the frame.
Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
====================
net: mvpp2: prs: Fixes for VID filtering
This series fixes some issues with VID filtering offload, mainly due to
the wrong ranges being used in the TCAM header parser.
The first patch fixes a bug where removing a VLAN from a port's
whitelist would also remove it from other port's, if they are on the
same PPv2 instance.
The second patch makes so that we don't invalidate the wrong TCAM
entries when clearing the whole whitelist.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: mvpp2: prs: Use the correct helpers when removing all VID filters
When removing all VID filters, the mvpp2_prs_vid_entry_remove would be
called with the TCAM id incorrectly used as a VID, causing the wrong
TCAM entries to be invalidated.
Fix this by directly invalidating entries in the VID range.
Fixes: 56beda3db602 ("net: mvpp2: Add hardware offloading for VLAN filtering") Suggested-by: Yuri Chipchev <yuric@marvell.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: mvpp2: prs: Fix parser range for VID filtering
VID filtering is implemented in the Header Parser, with one range of 11
vids being assigned for each no-loopback port.
Make sure we use the per-port range when looking for existing entries in
the Parser.
Since we used a global range instead of a per-port one, this causes VIDs
to be removed from the whitelist from all ports of the same PPv2
instance.
Fixes: 56beda3db602 ("net: mvpp2: Add hardware offloading for VLAN filtering") Suggested-by: Yuri Chipchev <yuric@marvell.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 12 Jun 2019 18:08:15 +0000 (11:08 -0700)]
Merge branch 'mlxsw-Various-fixes'
Ido Schimmel says:
====================
mlxsw: Various fixes
This patchset contains various fixes for mlxsw.
Patch #1 fixes an hash polarization problem when a nexthop device is a
LAG device. This is caused by the fact that the same seed is used for
the LAG and ECMP hash functions.
Patch #2 fixes an issue in which the driver fails to refresh a nexthop
neighbour after it becomes dead. This prevents the nexthop from ever
being written to the adjacency table and used to forward traffic. Patch
Patch #4 fixes a wrong extraction of TOS value in flower offload code.
Patch #5 is a test case.
Patch #6 works around a buffer issue in Spectrum-2 by reducing the
default sizes of the shared buffer pools.
Patch #7 prevents prio-tagged packets from entering the switch when PVID
is removed from the bridge port.
Please consider patches #2, #4 and #6 for 5.1.y
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 11 Jun 2019 07:19:46 +0000 (10:19 +0300)]
mlxsw: spectrum: Disallow prio-tagged packets when PVID is removed
When PVID is removed from a bridge port, the Linux bridge drops both
untagged and prio-tagged packets. Align mlxsw with this behavior.
Fixes: 148f472da5db ("mlxsw: reg: Add the Switch Port Acceptable Frame Types register") Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Tue, 11 Jun 2019 07:19:45 +0000 (10:19 +0300)]
mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2
Due to an issue on Spectrum-2, in front-panel ports split four ways, 2 out
of 32 port buffers cannot be used. To work around this, the next FW release
will mark them as unused, and will report correspondingly lower total
shared buffer size. mlxsw will pick up the new value through a query to
cap_total_buffer_size resource. However the initial size for shared buffer
pool 0 is hard-coded and therefore needs to be updated.
Thus reduce the pool size by 2.7 MiB (which corresponds to 2/32 of the
total size of 42 MiB), and round down to the whole number of cells.
Fixes: fe099bf682ab ("mlxsw: spectrum_buffers: Add Spectrum-2 shared buffer configuration") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 11 Jun 2019 07:19:43 +0000 (10:19 +0300)]
mlxsw: spectrum_flower: Fix TOS matching
The TOS value was not extracted correctly. Fix it.
Fixes: 87996f91f739 ("mlxsw: spectrum_flower: Add support for ip tos") Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 11 Jun 2019 07:19:40 +0000 (10:19 +0300)]
mlxsw: spectrum: Use different seeds for ECMP and LAG hash
The same hash function and seed are used for both ECMP and LAG hash.
Therefore, when a LAG device is used as a nexthop device as part of an
ECMP group, hash polarization can occur and all the traffic will be
hashed to a single LAG slave.
Fix this by using a different seed for the LAG hash.
Fixes: fa73989f2697 ("mlxsw: spectrum: Use a stable ECMP/LAG seed") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Wed, 12 Jun 2019 17:23:57 +0000 (17:23 +0000)]
net: tls, correctly account for copied bytes with multiple sk_msgs
tls_sw_do_sendpage needs to return the total number of bytes sent
regardless of how many sk_msgs are allocated. Unfortunately, copied
(the value we return up the stack) is zero'd before each new sk_msg
is allocated so we only return the copied size of the last sk_msg used.
The caller (splice, etc.) of sendpage will then believe only part
of its data was sent and send the missing chunks again. However,
because the data actually was sent the receiver will get multiple
copies of the same data.
To reproduce this do multiple sendfile calls with a length close to
the max record size. This will in turn call splice/sendpage, sendpage
may use multiple sk_msg in this case and then returns the incorrect
number of bytes. This will cause splice to resend creating duplicate
data on the receiver. Andre created a C program that can easily
generate this case so we will push a similar selftest for this to
bpf-next shortly.
The fix is to _not_ zero the copied field so that the total sent
bytes is returned.
Reported-by: Steinar H. Gunderson <steinar+kernel@gunderson.no> Reported-by: Andre Tomt <andre@tomt.net> Tested-by: Andre Tomt <andre@tomt.net> Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Get the ingress interface and increment ICMP counters based on that
instead of skb->dev when the the dev is a VRF device.
This is a follow up on the following message:
https://www.spinics.net/lists/netdev/msg560268.html
v2: Avoid changing skb->dev since it has unintended effect for local
delivery (David Ahern). Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Using ethtool, users can specify a classification action matching on the
full vlan tag, which includes the DEI bit (also previously called CFI).
However, when converting the ethool_flow_spec to a flow_rule, we use
dissector keys to represent the matching patterns.
Since the vlan dissector key doesn't include the DEI bit, this
information was silently discarded when translating the ethtool
flow spec in to a flow_rule.
This commit adds the DEI bit into the vlan dissector key, and allows
propagating the information to the driver when parsing the ethtool flow
spec.
Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Masanari Iida [Wed, 12 Jun 2019 12:29:34 +0000 (21:29 +0900)]
linux-next: DOC: RDS: Fix a typo in rds.txt
This patch fixes a spelling typo in rds.txt
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Wed, 12 Jun 2019 09:50:37 +0000 (11:50 +0200)]
mpls: fix af_mpls dependencies for real
Randy reported that selecting MPLS_ROUTING without PROC_FS breaks
the build, because since commit c1a9d65954c6 ("mpls: fix af_mpls
dependencies"), MPLS_ROUTING selects PROC_SYSCTL, but Kconfig's select
doesn't recursively handle dependencies.
Change the select into a dependency.
Fixes: c1a9d65954c6 ("mpls: fix af_mpls dependencies") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 11 Jun 2019 19:07:33 +0000 (12:07 -0700)]
Merge branch 'vxlan-geneve-linear'
Stefano Brivio says:
====================
Don't assume linear buffers in error handlers for VXLAN and GENEVE
Guillaume noticed the same issue fixed by commit 26fc181e6cac ("fou, fou6:
do not assume linear skbs") for fou and fou6 is also present in VXLAN and
GENEVE error handlers: we can't assume linear buffers there, we need to
use pskb_may_pull() instead.
====================
Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Mon, 10 Jun 2019 22:27:06 +0000 (00:27 +0200)]
geneve: Don't assume linear buffers in error handler
In commit a07966447f39 ("geneve: ICMP error lookup handler") I wrongly
assumed buffers from icmp_socket_deliver() would be linear. This is not
the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear
data.
Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac
("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6:
avoid uninit-value in gue_err() and gue6_err()").
Use pskb_may_pull() instead of checking skb->len, and take into account
the fact we later access the GENEVE header with udp_hdr(), so we also
need to sum skb_transport_header() here.
Reported-by: Guillaume Nault <gnault@redhat.com> Fixes: a07966447f39 ("geneve: ICMP error lookup handler") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Mon, 10 Jun 2019 22:27:05 +0000 (00:27 +0200)]
vxlan: Don't assume linear buffers in error handler
In commit c3a43b9fec8a ("vxlan: ICMP error lookup handler") I wrongly
assumed buffers from icmp_socket_deliver() would be linear. This is not
the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear
data.
Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac
("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6:
avoid uninit-value in gue_err() and gue6_err()").
Use pskb_may_pull() instead of checking skb->len, and take into account
the fact we later access the VXLAN header with udp_hdr(), so we also
need to sum skb_transport_header() here.
Reported-by: Guillaume Nault <gnault@redhat.com> Fixes: c3a43b9fec8a ("vxlan: ICMP error lookup handler") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Sun, 9 Jun 2019 14:26:21 +0000 (23:26 +0900)]
net: openvswitch: do not free vport if register_netdevice() is failed.
In order to create an internal vport, internal_dev_create() is used and
that calls register_netdevice() internally.
If register_netdevice() fails, it calls dev->priv_destructor() to free
private data of netdev. actually, a private data of this is a vport.
Hence internal_dev_create() should not free and use a vport after failure
of register_netdevice().
Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
But it missed that zerocopy need not be passed at the first send. The
right test whether the uarg is newly allocated and thus has extra
refcnt 1 is not !skb, but !skb_zcopy.
Fixes: 100f6d8e09905 ("net: correct zerocopy refcnt with udp MSG_MORE") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Sun, 9 Jun 2019 00:48:03 +0000 (17:48 -0700)]
nfp: ensure skb network header is set for packet redirect
Packets received at the NFP driver may be redirected to egress of another
netdev (e.g. in the case of OvS internal ports). On the egress path, some
processes, like TC egress hooks, may expect the network header offset
field in the skb to be correctly set. If this is not the case there is
potential for abnormal behaviour and even the triggering of BUG() calls.
Set the skb network header field before the mac header pull when doing a
packet redirect.
Fixes: 27f54b582567 ("nfp: allow fallback packets from non-reprs") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Sat, 8 Jun 2019 01:26:33 +0000 (18:26 -0700)]
tcp: fix undo spurious SYNACK in passive Fast Open
Commit 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK
retransmit") may cause tcp_fastretrans_alert() to warn about pending
retransmission in Open state. This is triggered when the Fast Open
server both sends data and has spurious SYNACK retransmission during
the handshake, and the data packets were lost or reordered.
The root cause is a bit complicated:
(1) Upon receiving SYN-data: a full socket is created with
snd_una = ISN + 1 by tcp_create_openreq_child()
(2) On SYNACK timeout the server/sender enters CA_Loss state.
(3) Upon receiving the final ACK to complete the handshake, sender
does not mark FLAG_SND_UNA_ADVANCED since (1)
Sender then calls tcp_process_loss since state is CA_loss by (2)
(4) tcp_process_loss() does not invoke undo operations but instead
mark REXMIT_LOST to force retransmission
(5) tcp_rcv_synrecv_state_fastopen() calls tcp_try_undo_loss(). It
changes state to CA_Open but has positive tp->retrans_out
(6) Next ACK triggers the WARN_ON in tcp_fastretrans_alert()
The step that goes wrong is (4) where the undo operation should
have been invoked because the ACK successfully acknowledged the
SYN sequence. This fixes that by specifically checking undo
when the SYN-ACK sequence is acknowledged. Then after
tcp_process_loss() the state would be further adjusted based
in tcp_fastretrans_alert() to avoid triggering the warning in (6).
Fixes: 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Sat, 8 Jun 2019 12:50:19 +0000 (14:50 +0200)]
mpls: fix af_mpls dependencies
MPLS routing code relies on sysctl to work, so let it select PROC_SYSCTL.
Reported-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
ibmvnic: Fixes for device reset handling
This series contains three unrelated fixes to issues seen during
device resets. The first patch fixes an error when the driver requests
to deactivate the link of an uninitialized device, resulting in a
failure to reset. Next, a patch to fix multicast transmission
failures seen after a driver reset. The final patch fixes mishandling
of memory allocation failures during device initialization, which
caused a kernel oops.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 7 Jun 2019 21:03:55 +0000 (16:03 -0500)]
ibmvnic: Fix unchecked return codes of memory allocations
The return values for these memory allocations are unchecked,
which may cause an oops if the driver does not handle them after
a failure. Fix by checking the function's return code.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 7 Jun 2019 21:03:54 +0000 (16:03 -0500)]
ibmvnic: Refresh device multicast list after reset
It was observed that multicast packets were no longer received after
a device reset. The fix is to resend the current multicast list to
the backing device after recovery.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 7 Jun 2019 21:03:53 +0000 (16:03 -0500)]
ibmvnic: Do not close unopened driver during reset
Check driver state before halting it during a reset. If the driver is
not running, do nothing. Otherwise, a request to deactivate a down link
can cause an error and the reset will fail.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Please pull and let me know if there is any problem.
For -stable v4.17
('net/mlx5: Avoid reloading already removed devices')
For -stable v5.0
('net/mlx5e: Avoid detaching non-existing netdev under switchdev mode')
For -stable v5.1
('net/mlx5e: Fix source port matching in fdb peer flow rule')
('net/mlx5e: Support tagged tunnel over bond')
('net/mlx5e: Add ndo_set_feature for uplink representor')
('net/mlx5: Update pci error handler entries and command translation')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 10 Jun 2019 02:44:01 +0000 (19:44 -0700)]
Merge tag 'linux-can-fixes-for-5.2-20190607' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2019-06-07
this is a pull reqeust of 9 patches for net/master.
The first patch is by Alexander Dahl and removes a duplicate menu entry from
the Kconfig. The next patch by Joakim Zhang fixes the timeout in the flexcan
driver when setting small bit rates. Anssi Hannula's patch for the xilinx_can
driver fixes the bittiming_const for CAN FD core. The two patches by Sean
Nyekjaer bring mcp25625 to the existing mcp251x driver. The patch by Eugen
Hristev implements an errata for the m_can driver. YueHaibing's patch fixes the
error handling ing can_init(). The patch by Fabio Estevam for the flexcan
driver removes an unneeded registration message during flexcan_probe(). And the
last patch is by Willem de Bruijn and adds the missing purging the socket
error queue on sock destruct.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
George Wilkie [Fri, 7 Jun 2019 10:49:41 +0000 (11:49 +0100)]
mpls: fix warning with multi-label encap
If you configure a route with multiple labels, e.g.
ip route add 10.10.3.0/24 encap mpls 16/100 via 10.10.2.2 dev ens4
A warning is logged:
kernel: [ 130.561819] netlink: 'ip': attribute type 1 has an invalid
length.
This happens because mpls_iptunnel_policy has set the type of
MPLS_IPTUNNEL_DST to fixed size NLA_U32.
Change it to a minimum size.
nla_get_labels() does the remaining validation.
Fixes: e3e4712ec096 ("mpls: ip tunnel support") Signed-off-by: George Wilkie <gwilkie@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Schmitz [Fri, 7 Jun 2019 05:37:34 +0000 (17:37 +1200)]
net: phy: rename Asix Electronics PHY driver
[Resent to net instead of net-next - may clash with Anders Roxell's patch
series addressing duplicate module names]
Commit 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver")
introduced a new PHY driver drivers/net/phy/asix.c that causes a module
name conflict with a pre-existiting driver (drivers/net/usb/asix.c).
The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded
by that driver via its PHY ID. A rename of the driver looks unproblematic.
Rename PHY driver to ax88796b.c in order to resolve name conflict.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Fixes: 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 6 Jun 2019 21:32:34 +0000 (14:32 -0700)]
ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero
Before taking a refcount, make sure the object is not already
scheduled for deletion.
Same fix is needed in ipv6_flowlabel_opt()
Fixes: 18367681a10b ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
CC net/ipv4/fib_semantics.o
net/ipv4/fib_semantics.c: In function 'fib_check_nh_v4_gw':
net/ipv4/fib_semantics.c:1027:12: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized]
if (!tbl || err) {
^~
Signed-off-by: Enrico Weigelt <info@metux.net> Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix several bugs in riscv64 JIT code emission which forgot to clear high
32-bits for alu32 ops, from Björn and Luke with selftests covering all
relevant BPF alu ops from Björn and Jiong.
2) Two fixes for UDP BPF reuseport that avoid calling the program in case of
__udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption
that skb->data is pointing to transport header, from Martin.
3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog
workqueue, and a missing restore of sk_write_space when psock gets dropped,
from Jakub and John.
4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it
breaks standard applications like DNS if reverse NAT is not performed upon
receive, from Daniel.
5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6
fails to verify that the length of the tuple is long enough, from Lorenz.
6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for
{un,}successful probe) as that is expected to be propagated as an fd to
load_sk_storage_btf() and thus closing the wrong descriptor otherwise,
from Michal.
7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir.
8) Minor misc fixes in docs, samples and selftests, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Britstein [Sun, 2 Jun 2019 13:47:59 +0000 (13:47 +0000)]
net/mlx5e: Support tagged tunnel over bond
Stacked devices like bond interface may have a VLAN device on top of
them. Detect lag state correctly under this condition, and return the
correct routed net device, according to it the encap header is built.
Fixes: e32ee6c78efa ("net/mlx5e: Support tunnel encap over tagged Ethernet") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Alaa Hleihel [Sun, 26 May 2019 08:56:27 +0000 (11:56 +0300)]
net/mlx5e: Avoid detaching non-existing netdev under switchdev mode
After introducing dedicated uplink representor, the netdev instance
set over the esw manager vport (PF) became no longer in use, so it was
removed in the cited commit once we're on switchdev mode.
However, the mlx5e_detach function was not updated accordingly, and it
still tries to detach a non-existing netdev, causing a kernel crash.
Raed Salem [Sun, 2 Jun 2019 09:04:08 +0000 (12:04 +0300)]
net/mlx5e: Fix source port matching in fdb peer flow rule
The cited commit changed the initialization placement of the eswitch
attributes so it is done prior to parse tc actions function call,
including among others the in_rep and in_mdev fields which are mistakenly
reassigned inside the parse actions function.
This breaks the source port matching criteria of the peer redirect rule.
Fix by removing the now redundant reassignment of the already initialized
fields.
Fixes: 988ab9c7363a ("net/mlx5e: Introduce mlx5e_flow_esw_attr_init() helper") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net/mlx5e: Replace reciprocal_scale in TX select queue function
The TX queue index returned by the fallback function ranges
between [0,NUM CHANNELS - 1] if QoS isn't set and
[0, (NUM CHANNELS)*(NUM TCs) -1] otherwise.
Our HW uses different TC mapping than the fallback function
(which is denoted as 'up', user priority) so we only need to extract
a channel number out of the returned value.
Since (NUM CHANNELS)*(NUM TCs) is a relatively small number, using
reciprocal scale almost always returns zero.
We instead access the 'txq2sq' table to extract the sq (and with it the
channel number) associated with the tx queue, thus getting
a more evenly distributed channel number.
Perf:
Rx/Tx side with Intel(R) Xeon(R) Silver 4108 CPU @ 1.80GHz and ConnectX-5.
Used 'iperf' UDP traffic, 10 threads, and priority 5.
Before: 0.566Mpps
After: 2.37Mpps
As expected, releasing the existing bottleneck of steering all traffic
to TX queue zero significantly improves transmission rates.
Chris Mi [Thu, 16 May 2019 09:36:43 +0000 (17:36 +0800)]
net/mlx5e: Add ndo_set_feature for uplink representor
After we have a dedicated uplink representor, the new netdev ops
doesn't support ndo_set_feature. Because of that, we can't change
some features, eg. rxvlan. Now add it back.
In this patch, I also do a cleanup for the features flag handling,
eg. remove duplicate NETIF_F_HW_TC flag setting.
Fixes: aec002f6f82c ("net/mlx5e: Uninstantiate esw manager vport netdev on switchdev mode") Signed-off-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Alaa Hleihel [Sun, 19 May 2019 08:11:49 +0000 (11:11 +0300)]
net/mlx5: Avoid reloading already removed devices
Prior to reloading a device we must first verify that it was not already
removed. Otherwise, the attempt to remove the device will do nothing, and
in that case we will end up proceeding with adding an new device that no
one was expecting to remove, leaving behind used resources such as EQs that
causes a failure to destroy comp EQs and syndrome (0x30f433).
Fix that by making sure that we try to remove and add a device (based on a
protocol) only if the device is already added.
Edward Srouji [Thu, 23 May 2019 16:45:38 +0000 (19:45 +0300)]
net/mlx5: Update pci error handler entries and command translation
Add missing entries for create/destroy UCTX and UMEM commands.
This could get us wrong "unknown FW command" error in flows
where we unbind the device or reset the driver.
Also the translation of these commands from opcodes to string
was missing.
Fixes: 6e3722baac04 ("IB/mlx5: Use the correct commands for UMEM and UCTX allocation") Signed-off-by: Edward Srouji <edwards@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
CAN supports software tx timestamps as of the below commit. Purge
any queued timestamp packets on socket destroy.
Fixes: 51f31cabe3ce ("ip: support for TX timestamps on UDP and RAW sockets") Reported-by: syzbot+a90604060cb40f5bdd16@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The reason for printing 'ptrval' is explained at
Documentation/core-api/printk-formats.rst:
"Pointers printed without a specifier extension (i.e unadorned %p) are
hashed to prevent leaking information about the kernel memory layout. This
has the added benefit of providing a unique identifier. On 64-bit machines
the first 32 bits are zeroed. The kernel will print ``(ptrval)`` until it
gathers enough entropy."
Instead of passing %pK, which can print the correct address, simply
remove the entire message as it is not really that useful.
Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Eugen Hristev [Mon, 4 Mar 2019 14:44:13 +0000 (14:44 +0000)]
can: m_can: implement errata "Needless activation of MRAF irq"
During frame reception while the MCAN is in Error Passive state and the
Receive Error Counter has thevalue MCAN_ECR.REC = 127, it may happen
that MCAN_IR.MRAF is set although there was no Message RAM access
failure. If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is
generated.
Work around:
The Message RAM Access Failure interrupt routine needs to check whether
MCAN_ECR.RP = '1' and MCAN_ECR.REC = '127'.
In this case, reset MCAN_IR.MRAF. No further action is required.
This affects versions older than 3.2.0
Errata explained on Sama5d2 SoC which includes this hardware block:
http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Family-Silicon-Errata-and-Data-Sheet-Clarification-DS80000803B.pdf
chapter 6.2
Reproducibility: If 2 devices with m_can are connected back to back,
configuring different bitrate on them will lead to interrupt storm on
the receiving side, with error "Message RAM access failure occurred".
Another way is to have a bad hardware connection. Bad wire connection
can lead to this issue as well.
This patch fixes the issue according to provided workaround.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: xilinx_can: use correct bittiming_const for CAN FD core
Commit 9e5f1b273e6a ("can: xilinx_can: add support for Xilinx CAN FD
core") added a new can_bittiming_const structure for CAN FD cores that
support larger values for tseg1, tseg2, and sjw than previous Xilinx CAN
cores, but the commit did not actually take that into use.
Fix that.
Tested with CAN FD core on a ZynqMP board.
Fixes: 9e5f1b273e6a ("can: xilinx_can: add support for Xilinx CAN FD core") Reported-by: Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Cc: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Joakim Zhang [Thu, 31 Jan 2019 09:37:22 +0000 (09:37 +0000)]
can: flexcan: fix timeout when set small bitrate
Current we can meet timeout issue when setting a small bitrate like
10000 as follows on i.MX6UL EVK board (ipg clock = 66MHZ, per clock =
30MHZ):
| root@imx6ul7d:~# ip link set can0 up type can bitrate 10000
A link change request failed with some changes committed already.
Interface can0 may have been left with an inconsistent configuration,
please check.
| RTNETLINK answers: Connection timed out
It is caused by calling of flexcan_chip_unfreeze() timeout.
Originally the code is using usleep_range(10, 20) for unfreeze
operation, but the patch (8badd65 can: flexcan: avoid calling
usleep_range from interrupt context) changed it into udelay(10) which is
only a half delay of before, there're also some other delay changes.
After double to FLEXCAN_TIMEOUT_US to 100 can fix the issue.
Meanwhile, Rasmus Villemoes reported that even with a timeout of 100,
flexcan_probe() fails on the MPC8309, which requires a value of at least
140 to work reliably. 250 works for everyone.
1) Free AF_PACKET po->rollover properly, from Willem de Bruijn.
2) Read SFP eeprom in max 16 byte increments to avoid problems with
some SFP modules, from Russell King.
3) Fix UDP socket lookup wrt. VRF, from Tim Beale.
4) Handle route invalidation properly in s390 qeth driver, from Julian
Wiedmann.
5) Memory leak on unload in RDS, from Zhu Yanjun.
6) sctp_process_init leak, from Neil HOrman.
7) Fix fib_rules rule insertion semantic change that broke Android,
from Hangbin Liu.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
net: aquantia: fix wol configuration not applied sometimes
ethtool: fix potential userspace buffer overflow
Fix memory leak in sctp_process_init
net: rds: fix memory leak when unload rds_rdma
ipv6: fix the check before getting the cookie in rt6_get_cookie
ipv4: not do cache for local delivery if bc_forwarding is enabled
s390/qeth: handle error when updating TX queue count
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
s390/qeth: check dst entry before use
s390/qeth: handle limited IPv4 broadcast in L3 TX path
net: fix indirect calls helpers for ptype list hooks.
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
udp: only choose unbound UDP socket for multicast when not in a VRF
net/tls: replace the sleeping lock around RX resync with a bit lock
...
Linus Torvalds [Fri, 7 Jun 2019 16:25:27 +0000 (09:25 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Things are looking pretty quiet here in RDMA, not too many bug fixes
rolling in right now. The usual driver bug fixes and fixes for a
couple of regressions introduced in 5.2:
- Fix a race on bootup with RDMA device renaming and srp. SRP also
needs to rename its internal sys files
- Fix a memory leak in hns
- Don't leak resources in efa on certain error unwinds
- Don't panic in certain error unwinds in ib_register_device
- Various small user visible bug fix patches for the hfi and efa
drivers
- Fix the 32 bit compilation break"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/efa: Remove MAYEXEC flag check from mmap flow
mlx5: avoid 64-bit division
IB/hfi1: Validate page aligned for a given virtual address
IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value
IB/hfi1: Insure freeze_work work_struct is canceled on shutdown
IB/rdmavt: Fix alloc_qpn() WARN_ON()
RDMA/core: Fix panic when port_data isn't initialized
RDMA/uverbs: Pass udata on uverbs error unwind
RDMA/core: Clear out the udata before error unwind
RDMA/hns: Fix PD memory leak for internal allocation
RDMA/srp: Rename SRP sysfs name after IB device rename trigger
Linus Torvalds [Fri, 7 Jun 2019 16:21:48 +0000 (09:21 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Another round of mostly-benign fixes, the exception being a boot crash
on SVE2-capable CPUs (although I don't know where you'd find such a
thing, so maybe it's benign too).
We're in the process of resolving some big-endian ptrace breakage, so
I'll probably have some more for you next week.
Summary:
- Fix boot crash on platforms with SVE2 due to missing register
encoding
- Fix architected timer accessors when CONFIG_OPTIMIZE_INLINING=y
- Move cpu_logical_map into smp.h for use by upcoming irqchip drivers
- Trivial typo fix in comment
- Disable some useless, noisy warnings from GCC 9"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Silence gcc warnings about arch ABI drift
ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix
arm64: arch_timer: mark functions as __always_inline
arm64: smp: Moved cpu_logical_map[] to smp.h
arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding()
====================
Please refer to the patch 1/6 as the main patch with the details
on the current sendmsg hook API limitations and proposal to fix
it in order to work with basic applications like DNS. Remaining
patches are the usual uapi and tooling updates as well as test
cases. Thanks a lot!
v2 -> v3:
- Add attach types to test_section_names.c and libbpf (Andrey)
- Added given Acks, rest as-is
v1 -> v2:
- Split off uapi header sync and bpftool bits (Martin, Alexei)
- Added missing bpftool doc and bash completion as well
====================
Daniel Borkmann [Thu, 6 Jun 2019 23:49:02 +0000 (01:49 +0200)]
bpf: expand section tests for test_section_names
Add cgroup/recvmsg{4,6} to test_section_names as well. Test run output:
# ./test_section_names
libbpf: failed to guess program type based on ELF section name 'InvAliD'
libbpf: supported section(type) names are: [...]
libbpf: failed to guess attach type based on ELF section name 'InvAliD'
libbpf: attachable section(type) names are: [...]
libbpf: failed to guess program type based on ELF section name 'cgroup'
libbpf: supported section(type) names are: [...]
libbpf: failed to guess attach type based on ELF section name 'cgroup'
libbpf: attachable section(type) names are: [...]
Summary: 38 PASSED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Thu, 6 Jun 2019 23:49:01 +0000 (01:49 +0200)]
bpf: more msg_name rewrite tests to test_sock_addr
Extend test_sock_addr for recvmsg test cases, bigger parts of the
sendmsg code can be reused for this. Below are the strace view of
the recvmsg rewrites; the sendmsg side does not have a BPF prog
connected to it for the context of this test:
# ./test_sock_addr.sh
[...]
Test case: recvmsg4: return code ok .. [PASS]
Test case: recvmsg4: return code !ok .. [PASS]
Test case: recvmsg6: return code ok .. [PASS]
Test case: recvmsg6: return code !ok .. [PASS]
Test case: recvmsg4: rewrite IP & port (asm) .. [PASS]
Test case: recvmsg6: rewrite IP & port (asm) .. [PASS]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Thu, 6 Jun 2019 23:48:58 +0000 (01:48 +0200)]
bpf: sync tooling uapi header
Sync BPF uapi header in order to pull in BPF_CGROUP_UDP{4,6}_RECVMSG
attach types. This is done and preferred as an extra patch in order
to ease sync of libbpf.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Thu, 6 Jun 2019 23:48:57 +0000 (01:48 +0200)]
bpf: fix unconnected udp hooks
Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently
to applications as also stated in original motivation in 7828f20e3779 ("Merge
branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter
two hooks into Cilium to enable host based load-balancing with Kubernetes,
I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes
typically sets up DNS as a service and is thus subject to load-balancing.
Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API
is currently insufficient and thus not usable as-is for standard applications
shipped with most distros. To break down the issue we ran into with a simple
example:
For the purpose of a simple test, we set up above IPs as service IPs and
transparently redirect traffic to a different DNS backend server for that
node:
# cilium service list
ID Frontend Backend
1 147.75.207.207:53 1 => 8.8.8.8:53
2 147.75.207.208:53 1 => 8.8.8.8:53
The attached BPF program is basically selecting one of the backends if the
service IP/port matches on the cgroup hook. DNS breaks here, because the
hooks are not transparent enough to applications which have built-in msg_name
address checks:
# nslookup 1.1.1.1
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
[...]
;; connection timed out; no servers could be reached
# dig 1.1.1.1
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
[...]
; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
;; global options: +cmd
;; connection timed out; no servers could be reached
For comparison, if none of the service IPs is used, and we tell nslookup
to use 8.8.8.8 directly it works just fine, of course:
# nslookup 1.1.1.1 8.8.8.8
1.1.1.1.in-addr.arpa name = one.one.one.one.
In order to fix this and thus act more transparent to the application,
this needs reverse translation on recvmsg() side. A minimal fix for this
API is to add similar recvmsg() hooks behind the BPF cgroups static key
such that the program can track state and replace the current sockaddr_in{,6}
with the original service IP. From BPF side, this basically tracks the
service tuple plus socket cookie in an LRU map where the reverse NAT can
then be retrieved via map value as one example. Side-note: the BPF cgroups
static key should be converted to a per-hook static key in future.
Same example after this fix:
# cilium service list
ID Frontend Backend
1 147.75.207.207:53 1 => 8.8.8.8:53
2 147.75.207.208:53 1 => 8.8.8.8:53
Lookups work fine now:
# nslookup 1.1.1.1
1.1.1.1.in-addr.arpa name = one.one.one.one.
And from an actual packet level it shows that we're using the back end
server when talking via 147.75.207.20{7,8} front end:
# tcpdump -i any udp
[...]
12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
[...]
In order to be flexible and to have same semantics as in sendmsg BPF
programs, we only allow return codes in [1,1] range. In the sendmsg case
the program is called if msg->msg_name is present which can be the case
in both, connected and unconnected UDP.
The former only relies on the sockaddr_in{,6} passed via connect(2) if
passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar
way to call into the BPF program whenever a non-NULL msg->msg_name was
passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note
that for TCP case, the msg->msg_name is ignored in the regular recvmsg
path and therefore not relevant.
For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE,
the hook is not called. This is intentional as it aligns with the same
semantics as in case of TCP cgroup BPF hooks right now. This might be
better addressed in future through a different bpf_attach_type such
that this case can be distinguished from the regular recvmsg paths,
for example.
Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds [Thu, 6 Jun 2019 20:13:09 +0000 (13:13 -0700)]
Merge branch 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix crashes when accessing PCI devices on some machines like C240 and
J5000. The crashes were triggered because we replaced cache flushes
by nops in the alternative coding where we shouldn't for some
machines.
- Dave fixed a race in the usage of the sr1 space register when used to
load the coherence index.
- Use the hardware lpa instruction to to load the physical address of
kernel virtual addresses in the iommu driver code.
- The kernel may fail to link when CONFIG_MLONGCALLS isn't set. Solve
that by rearranging functions in the final vmlinux executeable.
- Some defconfig cleanups and removal of compiler warnings.
* 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix crash due alternative coding for NP iopdir_fdc bit
parisc: Use lpa instruction to load physical addresses in driver code
parisc: configs: Remove useless UEVENT_HELPER_PATH
parisc: Use implicit space register selection for loading the coherence index of I/O pdirs
parisc: Fix compiler warnings in float emulation code
parisc/slab: cleanup after /proc/slab_allocators removal
parisc: Allow building 64-bit kernel without -mlong-calls compiler option
parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK
Linus Torvalds [Thu, 6 Jun 2019 20:10:49 +0000 (13:10 -0700)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression that breaks the jitterentropy RNG and a
potential memory leak in hmac"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hmac - fix memory leak in hmac_init_tfm()
crypto: jitterentropy - change back to module_init()
Linus Torvalds [Thu, 6 Jun 2019 19:31:15 +0000 (12:31 -0700)]
Merge tag 'ovl-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Here's one fix for a class of bugs triggered by syzcaller, and one
that makes xfstests fail less"
* tag 'ovl-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: doc: add non-standard corner cases
ovl: detect overlapping layers
ovl: support the FS_IOC_FS[SG]ETXATTR ioctls
Linus Torvalds [Thu, 6 Jun 2019 19:25:56 +0000 (12:25 -0700)]
Merge tag 'fuse-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"This fixes a leaked inode lock in an error cleanup path and a data
consistency issue with copy_file_range().
It also adds a new flag for the WRITE request that allows userspace
filesystems to clear suid/sgid bits on the file if necessary"
* tag 'fuse-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: extract helper for range writeback
fuse: fix copy_file_range() in the writeback case
fuse: add FUSE_WRITE_KILL_PRIV
fuse: fallocate: fix return with locked inode
Linus Torvalds [Thu, 6 Jun 2019 19:19:37 +0000 (12:19 -0700)]
Merge tag 'nfs-for-5.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"These are mostly stable bugfixes found during testing, many during the
recent NFS bake-a-thon.
Stable bugfixes:
- SUNRPC: Fix regression in umount of a secure mount
- SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential
- NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter
- NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled
Other bugfixes:
- xprtrdma: Use struct_size() in kzalloc()"
* tag 'nfs-for-5.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled
NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter
SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential
SUNRPC fix regression in umount of a secure mount
xprtrdma: Use struct_size() in kzalloc()
Paolo Abeni [Thu, 6 Jun 2019 13:45:03 +0000 (15:45 +0200)]
pktgen: do not sleep with the thread lock held.
Currently, the process issuing a "start" command on the pktgen procfs
interface, acquires the pktgen thread lock and never release it, until
all pktgen threads are completed. The above can blocks indefinitely any
other pktgen command and any (even unrelated) netdevice removal - as
the pktgen netdev notifier acquires the same lock.
The issue is demonstrated by the following script, reported by Matteo:
ip -b - <<'EOF'
link add type dummy
link add type veth
link set dummy0 up
EOF
modprobe pktgen
echo reset >/proc/net/pktgen/pgctrl
{
echo rem_device_all
echo add_device dummy0
} >/proc/net/pktgen/kpktgend_0
echo count 0 >/proc/net/pktgen/dummy0
echo start >/proc/net/pktgen/pgctrl &
sleep 1
rmmod veth
Fix the above releasing the thread lock around the sleep call.
Additionally we must prevent racing with forcefull rmmod - as the
thread lock no more protects from them. Instead, acquire a self-reference
before waiting for any thread. As a side effect, running
rmmod pktgen
while some thread is running now fails with "module in use" error,
before this patch such command hanged indefinitely.
Note: the issue predates the commit reported in the fixes tag, but
this fix can't be applied before the mentioned commit.
v1 -> v2:
- no need to check for thread existence after flipping the lock,
pktgen threads are freed only at net exit time
-
Fixes: 6146e6a43b35 ("[PKTGEN]: Removes thread_{un,}lock() macros.") Reported-and-tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 6 Jun 2019 18:02:54 +0000 (11:02 -0700)]
Merge tag 'for-rc-adfs' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ADFS cleanups/fixes from Russell King:
"As a result of some of Al Viro's great work, here are a few cleanups
with fixes for adfs:
- factor out filename comparison, so we can be sure that
adfs_compare() (used for namei compare) and adfs_match() (used for
lookup) have the same behaviour.
- factor out filename lowering (which is not the same as tolower()
which will lower top-bit-set characters) to ensure that we have the
same behaviour when comparing filenames as when we hash them.
- factor out the object fixups, so we are applying all fixups to
directory objects in the same way, independent of the disk format.
- factor out the object name fixup (into the previously factored out
function) to ensure that filenames are appropriately translated -
for example, adfs allows '/' in filenames, which being the Unix
path separator, need to be translated to a different character,
which is normally '.' (DOS 8.3 filenames represent the . as a / on
adfs, so this is the expected reverse translation.)
- remove filename truncation; Al asked about this and apparently the
decision is to remove it. In any case, adfs's truncation was buggy,
so this rids us of that bug by removing the truncation feature.
- we now have only one location which adds the "filetype" suffix to
the filename, so there's no point that code being out of line.
- since we translate '/' into '.', an adfs filename of "/" or "//"
would end up being translated to "." and ".." which have special
meanings. In this case, change the first character to "^" to avoid
these special directory names being abused"
* tag 'for-rc-adfs' of git://git.armlinux.org.uk/~rmk/linux-arm:
fs/adfs: fix filename fixup handling for "/" and "//" names
fs/adfs: move append_filetype_suffix() into adfs_object_fixup()
fs/adfs: remove truncated filename hashing
fs/adfs: factor out filename fixup
fs/adfs: factor out object fixups
fs/adfs: factor out filename case lowering
fs/adfs: factor out filename comparison
Use a safe strscpy call to copy the ethtool stat strings into the
relevant buffers, instead of a memcpy that will be accessing
out-of-bound data.
Fixes: 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
"
Starting up....
tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu
%
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
"
>From vmcore, we can find that clean_list is NULL.
>From the source code, rds_mr_flushd calls rds_ib_mr_pool_flush_worker.
Then rds_ib_mr_pool_flush_worker calls
"
rds_ib_flush_mr_pool(pool, 0, NULL);
"
Then in function
"
int rds_ib_flush_mr_pool(struct rds_ib_mr_pool *pool,
int free_all, struct rds_ib_mr **ibmr_ret)
"
ibmr_ret is NULL.
In the source code,
"
...
list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail);
if (ibmr_ret)
*ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode);
/* more than one entry in llist nodes */
if (clean_nodes->next)
llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list);
...
"
When ibmr_ret is NULL, llist_entry is not executed. clean_nodes->next
instead of clean_nodes is added in clean_list.
So clean_nodes is discarded. It can not be used again.
The workqueue is executed periodically. So more and more clean_nodes are
discarded. Finally the clean_list is NULL.
Then this problem will occur.
Fixes: 1bc144b62524 ("net, rds, Replace xlist in net/rds/xlist.h with llist") Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The IPv4 equivalent code works. A workaround is to use IPPROTO_RAW
instead of IPPROTO_ICMPV6.
The failure happens because 2 bytes are eaten from the msghdr by
rawv6_probe_proto_opt() starting from commit 19e3c66b52ca ("ipv6
equivalent of "ipv4: Avoid reading user iov twice after
raw_probe_proto_opt""), but at that time it was not a problem because
IPV6_HDRINCL was not yet introduced.
Only eat these 2 bytes if hdrincl == 0.
Fixes: 715f504b1189 ("ipv6: add IPV6_HDRINCL option for raw sockets") Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Olivier Matz [Thu, 6 Jun 2019 07:15:18 +0000 (09:15 +0200)]
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
As it was done in commit 8f659a03a0ba ("net: ipv4: fix for a race
condition in raw_sendmsg") and commit 20b50d79974e ("net: ipv4: emulate
READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()") for ipv4, copy the
value of inet->hdrincl in a local variable, to avoid introducing a race
condition in the next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bob Peterson [Thu, 6 Jun 2019 12:33:38 +0000 (07:33 -0500)]
Revert "gfs2: Replace gl_revokes with a GLF flag"
Commit 73118ca8baf7 introduced a glock reference counting bug in
gfs2_trans_remove_revoke. Given that, replacing gl_revokes with a GLF flag is
no longer useful, so revert that commit.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Dave Martin [Thu, 6 Jun 2019 10:33:43 +0000 (11:33 +0100)]
arm64: Silence gcc warnings about arch ABI drift
Since GCC 9, the compiler warns about evolution of the
platform-specific ABI, in particular relating for the marshaling of
certain structures involving bitfields.
The kernel is a standalone binary, and of course nobody would be
so stupid as to expose structs containing bitfields as function
arguments in ABI. (Passing a pointer to such a struct, however
inadvisable, should be unaffected by this change. perf and various
drivers rely on that.)
So these warnings do more harm than good: turn them off.
We may miss warnings about future ABI drift, but that's too bad.
Future ABI breaks of this class will have to be debugged and fixed
the traditional way unless the compiler evolves finer-grained
diagnostics.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
projects / mirror_ubuntu-kernels.git / log