for __file in $(git grep --name-only --word-regexp $__from); do
sed -i "s/\<$__from\>/$__to/g" $__file;
done
Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-12-emil.l.velikov@gmail.com
Emil Velikov [Fri, 15 May 2020 09:50:47 +0000 (10:50 +0100)]
drm/amdgpu: use the unlocked drm_gem_object_put
The driver does not hold struct_mutex, thus using the locked version of
the helper is incorrect.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: amd-gfx@lists.freedesktop.org Fixes: a39414716ca0 ("drm/amdgpu: add independent DMA-buf import v9") Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-8-emil.l.velikov@gmail.com
Emil Velikov [Fri, 15 May 2020 09:50:42 +0000 (10:50 +0100)]
drm/gem: use _unlocked reference in drm_gem_objects_lookup docs
Use the drm_gem_object_put_unlocked in the documentation for
drm_gem_objects_lookup. The locked version of the helper should be used
solely by people who know exactly what they are doing.
Should prevent issues like ones adddressed with the next patch.
drm/mgag200: Replace VRAM helpers with SHMEM helpers
The VRAM helpers managed the framebuffer memory for mgag200. This came
with several problems, as some MGA device require the scanout address
to be located at VRAM offset 0. It's incompatible with the page-flip
semantics of DRM's atomic modesettting. With atomic modesetting, old and
new framebuffers have to be located in VRAM at the same time. So at least
one of them has to reside at a non-0 offset.
This patch replaces VRAM helpers with SHMEM helpers. GEM SHMEM buffers
reside in system memory, and are shadow-copied into VRAM during page
flips. The shadow copy always starts at VRAM offset 0.
The mgag200 supports a single pipeline with only a primary plane. It can
be converted to simple KMS helpers. This also adds support for atomic
modesetting. Wayland compositors, which use pageflip ioctls, can now be
used with mgag200.
v2:
* prepare encoder and CRTC in a separate patch
* remove suspend/resume code in a separate patch
* don't call set_format_regs() in pipe_update()
The MGA CRTC data structure struct mga_crtc contains unused additional
fields; so it can removed. The standard DRM CRTC and encoder structures
are embedded now in struct drm_simple_display_pipe. Done in preparation
of converting mgag200 to simple KMS helpers.
drm/mgag200: Move register initialization into separate function
Registers are initialized with constants. This is now done in
mgag200_init_regs(), mgag200_set_dac_regs() and mgag200_set_pci_regs().
Later patches should move these calls from mode setting to device
initialization.
drm/mgag200: Update mode registers after plane registers
Setting the plane registers first and the mode registers afterwards
reproduces the sequence used by atomic helpers. Done in preparation
of switching to simple KMS helpers.
drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O
Set different fields in MISC in their rsp location in the code. This
patch also fixes a bug in the original code where the mode's SYNC flags
were never written into the MISC register.
v2:
* use u8 instead of uint8_t
* define MGAREG_MISC_CLK_SEL_MASK
All register names and fields are now named according to the
MGA programming manuals. The function doesn't need the CRTC, so
callers pass in the device structure directly. The logging now
uses device-specific macros.
The original implementation busy-waited for the VSYNC flag to go
up, to synchronize the page flip with the display's vblank. This
code has been moved to mga_crtc_mode_set_base(). It's still present
in the non-atomic code paths, but won't be used in atomic commits.
With atomic, we should use interrupts to synchronize with vblanks.
v3:
* clarify commit message wrt. vblank busy-waiting
v2:
* use to_mga_device()
* use MiB instead of MB
* replace empty while loop with do-while, fixes checkpatch warning
* replace uint{8,32}_t with u{8,32}
The HW cursor of Matrox G200 cards only supports a 16-color palette
format. Univeral planes require at least ARGB or a similar component-
based format, so remove the HW cursor.
Alternatively, the driver could dither a cursor image from ARGB to
16 colors. But this does not produce pleasent-looking results in
general, so it's useless for modern compositors.
Without HW support, compositors will use software rendering.
Douglas Anderson [Mon, 18 May 2020 18:47:17 +0000 (11:47 -0700)]
drm/bridge: ti-sn65dsi86: Implement lane reordering + polarity
The ti-sn65dsi86 MIPI DSI to eDP bridge chip supports arbitrary
remapping of eDP lanes and also polarity inversion. Both of these
features have been described in the device tree bindings for the
device since the beginning but were never implemented in the driver.
Implement both of them.
Part of this change also allows you to (via the same device tree
bindings) specify to use fewer than the max number of DP lanes that
the panel reports. This could be useful if your display supports more
lanes but only a few are hooked up on your board.
drm/bridge: ti-sn65dsi86: Clear old error bits before AUX transfers
The AUX channel transfer error bits in the status register are latched
and need to be cleared. Clear them before doing our transfer so we
don't see old bits and get confused.
Without this patch having a single failure would mean that all future
transfers would look like they failed.
The ti-sn65dsi86 MIPI DSI to eDP bridge chip has a dedicated hardware
HPD (Hot Plug Detect) pin on it, but it's mostly useless for eDP
because of excessive debouncing in hardware. Specifically there is no
way to disable the debouncing and for eDP debouncing hurts you because
HPD is just used for knowing when the panel is ready, not for
detecting physical plug events.
Currently the driver in Linux just assumes that nobody has HPD hooked
up. It relies on folks setting the "no-hpd" property in the panel
node to specify that HPD isn't hooked up and then the panel driver
using this to add some worst case delays when turning on the panel.
Apparently it's also useful to specify "no-hpd" in the bridge node so
that the bridge driver can make sure it's doing the right thing
without peeking into the panel [1]. This would be used if anyone ever
found it useful to implement support for the HW HPD pin on the bridge.
Let's add this property to the bindings.
NOTES:
- This is somewhat of a backward-incompatible change. All current
known users of ti-sn65dsi86 didn't have "no-hpd" specified in the
bridge node yet none of them had HPD hooked up. This worked because
the current Linux driver just assumed that HPD was never hooked up.
We could make it less incompatible by saying that for this bridge
it's assumed HPD isn't hooked up _unless_ a property is defined, but
"no-hpd" is much more standard and it's unlikely to matter unless
someone quickly goes and implements HPD in the driver.
- It is sensible to specify "no-hpd" at the bridge chip level and
specify "hpd-gpios" at the panel level. That would mean HPD is
hooked up to some other GPIO in the system, just not the hardware
HPD pin on the bridge chip.
dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml
This moves the bindings over, based a lot on toshiba,tc358768.yaml.
Unless there's someone known to be better, I've set the maintainer in
the yaml as the first person to submit bindings.
drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux
The ti-sn65dsi86 MIPI DSI to eDP bridge chip has 4 pins on it that can
be used as GPIOs in a system. Each pin can be configured as input,
output, or a special function for the bridge chip. These are:
- GPIO1: SUSPEND Input
- GPIO2: DSIA VSYNC
- GPIO3: DSIA HSYNC or VSYNC
- GPIO4: PWM
Let's expose these pins as GPIOs. A few notes:
- Access to ti-sn65dsi86 is via i2c so we set "can_sleep".
- These pins can't be configured for IRQ.
- There are no programmable pulls or other fancy features.
- Keeping the bridge chip powered might be expensive. The driver is
setup such that if all used GPIOs are only inputs we'll power the
bridge chip on just long enough to read the GPIO and then power it
off again. Setting a GPIO as output will keep the bridge powered.
- If someone releases a GPIO we'll implicitly switch it to an input so
we no longer need to keep the bridge powered for it.
Because of all of the above limitations we just need to implement a
bare-bones GPIO driver. The device tree bindings already account for
this device being a GPIO controller so we only need the driver changes
for it.
NOTE: Despite the fact that these pins are nominally muxable I don't
believe it makes sense to expose them through the pinctrl interface as
well as the GPIO interface. The special functions are things that the
bridge chip driver itself would care about and it can just configure
the pins as needed.
Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[added pdata->gchip.base = -1;] Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.1.Ia50267a5549392af8b37e67092ca653a59c95886@changeid
Chris Wilson [Sat, 16 May 2020 21:23:30 +0000 (22:23 +0100)]
drm: Match drm_dp_send_clear_payload_id_table definition to declaration
drivers/gpu/drm/drm_dp_mst_topology.c:2898:6: warning: symbol 'drm_dp_send_clear_payload_id_table' was not declared. Should it be static?
drivers/gpu/drm/drm_dp_mst_topology.c:5451:37: warning: missing braces around initializer
drivers/gpu/drm/drm_dp_mst_topology.c:5451:37: warning: missing braces around initializer
Chris Wilson [Sat, 16 May 2020 21:23:27 +0000 (22:23 +0100)]
drm: Include internal header for managed function declarations
drivers/gpu/drm/drm_managed.c:61:6: warning: symbol 'drm_managed_release' was not declared. Should it be static?
CC drivers/gpu/drm/drm_managed.o
drivers/gpu/drm/drm_managed.c:61:6: warning: no previous prototype for ‘drm_managed_release’ [-Wmissing-prototypes]
void drm_managed_release(struct drm_device *dev)
Sam Ravnborg [Sun, 17 May 2020 19:01:24 +0000 (21:01 +0200)]
video: amba-clcd: use devm_of_find_backlight
Look up backlight device using devm_of_find_backlight().
This simplifies the code and prevents us from hardcoding
the node name in the driver.
v2:
- Added Cc: Peter Ujfalusi
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200517190139.740249-2-sam@ravnborg.org
Hans de Goede [Fri, 21 Feb 2020 17:33:13 +0000 (18:33 +0100)]
drm: Add DRM_MODE_TYPE_USERDEF flag to probed modes matching a video= argument
drm_helper_probe_add_cmdline_mode() prefers using a probed mode matching
a video= argument over calculating our own timings for the user specified
mode using CVT or GTF.
But userspace code which is auto-configuring the mode may want to know that
the user has specified that mode on the kernel commandline so that it can
pick that mode over the mode which is marked as DRM_MODE_TYPE_PREFERRED.
This commit sets the DRM_MODE_TYPE_USERDEF flag on the matching mode, just
as we would do on the user-specified mode when no matching probed mode is
found.
Wolfram Sang [Mon, 16 Mar 2020 16:39:07 +0000 (17:39 +0100)]
drm: encoder_slave: use new I2C API
i2c_new_client() is deprecated, use the replacement
i2c_new_client_device(). Also, we have a helper to check if a driver is
bound. Use it to simplify the code. Note that this changes the errno for
a failed device creation from ENOMEM to ENODEV. No callers currently
interpret this errno, though, so we use this condensed error check.
Emil Velikov [Tue, 5 May 2020 15:16:13 +0000 (16:16 +0100)]
drm/rockchip: vop: call vop_cfg_done() under reg_lock
The function vop_cfg_done() is a simple VOP_REG_SET(). As such it should
be done under a reg_lock. A quick look through the driver shows that all
other instances (apart from driver init) have the lock. Do the same here
Fixes: d308a881a591 ("drm/dp_mst: Kill the second sideband tx slot, save the world") Cc: Lyude Paul <lyude@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200513103155.12336-1-imre.deak@intel.com
Wolfram Sang [Wed, 13 May 2020 20:10:16 +0000 (22:10 +0200)]
drm/vblank: remove outdated and noisy output
The R-Car DU driver calls drm_vblank_init via some helper functions in
probe(). From what I checked, most drivers do this as well. I have a
config now where DU always stays in deferred_probe state because of a
missing dependency. This means that every time I rebind another driver
like MMC, the vblank init message is displayed again when the DU driver
is retried. Because the message doesn't really carry a useful
information, I suggest to simply drop it.
drm/mgag200: Embed connector instance in struct mga_device
Storing the connector instance in struct mga_device avoids some
dynamic memory allocation. On errors, the connector's initializer
function now destroys the i2c structure. Done in preparation of
converting mgag200 to simple-KMS helpers.
drm/mgag200: Use managed mode-config initialization
Mode configuration is now cleanued up automatically. While at it,
move all mode-config code into mgag200_mode.c. Done in preparation
of switching mgag200 to simple-KMS helpers.
v2:
* improve commit message (Sam)
* rebased during cherry pick
* also move bpp_shift initialization
drm/mgag200: Convert struct drm_device to struct mga_device with helper
Mgag200 uses dev_private to look up struct mga_device for instances
of struct drm_device. Use of dev_private is deprecated, so hide it in
the helper function to_mga_device().
Jason Yan [Wed, 6 May 2020 06:17:45 +0000 (14:17 +0800)]
video: fbdev: pxa168fb: make pxa168fb_init_mode() return void
No other functions use the return value of pxa168fb_init_mode() and the
return value is always 0 now. Make it return void. This fixes the
following coccicheck warning:
drivers/video/fbdev/pxa168fb.c:565:5-8: Unneeded variable: "ret". Return
"0" on line 597
drm/panel-simple: Support hpd-gpios for delaying prepare()
People use panel-simple when they have panels that are builtin to
their device. In these cases the HPD (Hot Plug Detect) signal isn't
really used for hotplugging devices but instead is used for power
sequencing. Panel timing diagrams (especially for eDP panels) usually
have the HPD signal in them and it acts as an indicator that the panel
is ready for us to talk to it.
Sometimes the HPD signal is hooked up to a normal GPIO on a system.
In this case we need to poll it in the correct place to know that the
panel is ready for us. In some system designs the right place for
this is panel-simple.
When adding this support, we'll account for the case that there might
be a circular dependency between panel-simple and the provider of the
GPIO. The case this was designed for was for the "ti-sn65dsi86"
bridge chip. If HPD is hooked up to one of the GPIOs provided by the
bridge chip then in our probe function we'll always get back
-EPROBE_DEFER. Let's handle this by allowing this GPIO to show up
late if we saw -EPROBE_DEFER during probe. NOTE: since the
gpio_get_optional() is used, if the "hpd-gpios" isn't there our
variable will just be NULL and we won't do anything in prepare().
dt-bindings: display: Add hpd-gpios to panel-common bindings
In the cases where there is no connector in a system there's no great
place to put "hpd-gpios". As per discussion [1] the best place to put
it is in the panel. Add this to the device tree bindings.
All info I could find about this panel show that it behaves the same
as the BOE NV133FHM-N61. However, it definitely appears to be a
unique panel because reading the EDID shows "NV133FHM-N62". We'll add
a string match for the new panel but until we find something unique
about it we'll just point at the N61's structures.
This panel appears to be the same or nearly the same as the BOE
NV133FHM-N61, but since (in the very least) it identifies itself as a
different model in the EDID we should add a new compatible string for
it.
Mika Kahola [Wed, 6 May 2020 12:08:27 +0000 (15:08 +0300)]
uapi/drm/drm_fourcc.h: Note on platform specificity for format modifiers
Make an additional note on DRM format modifiers for x and y tiling. These
format modifiers are defined for BDW+ platforms and therefore definition
is not valid for older gens. This is due to address swizzling for tiled
surfaces is no longer used. For newer platforms main memory controller has
a more effective address swizzling algorithm.
Konrad Dybcio [Wed, 6 May 2020 21:09:55 +0000 (23:09 +0200)]
drivers: drm: panel: Add ASUS TM5P5 NT35596 panel driver
This adds support for TMP5P5 NT35596 1080x1920 video
mode panel that can be found on some Asus Zenfone 2
Laser (Z00T) devices.
This panel seems to only be found in this device
and we have no straightforward way of actually
getting the correct model number, as no schematics
are released publicly.
Melissa Wen [Sat, 21 Mar 2020 20:37:40 +0000 (17:37 -0300)]
drm/vkms: enable cursor by default
This patch proposes a change in the behavior of the cursor to enable it as
soon as the vkms module is added. Enabling the cursor by default appears
to be an expected and more friendly behavior, especially when running IGT
tests.
video: fbdev: w100fb: Fix a potential double free.
Some memory is vmalloc'ed in the 'w100fb_save_vidmem' function and freed in
the 'w100fb_restore_vidmem' function. (these functions are called
respectively from the 'suspend' and the 'resume' functions)
However, it is also freed in the 'remove' function.
In order to avoid a potential double free, set the corresponding pointer
to NULL once freed in the 'w100fb_restore_vidmem' function.
Jason Yan [Wed, 22 Apr 2020 07:18:54 +0000 (15:18 +0800)]
fbdev: aty: use true, false for bool variables in atyfb_base.c
Fix the following coccicheck warning:
drivers/video/fbdev/aty/atyfb_base.c:3822:3-10: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/aty/atyfb_base.c:3824:3-9: WARNING: Assignment of
0/1 to bool variable
Jason Yan [Wed, 22 Apr 2020 07:18:45 +0000 (15:18 +0800)]
video: uvesafb: use true,false for bool variables
Fix the following coccicheck warning:
drivers/video/fbdev/uvesafb.c:48:12-17: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1827:3-13: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1829:3-13: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1835:3-9: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1837:3-9: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1839:3-8: WARNING: Assignment of 0/1 to
bool variable
Jason Yan [Wed, 22 Apr 2020 07:18:36 +0000 (15:18 +0800)]
video: udlfb: use true,false for bool variables
Fix the following coccicheck warning:
drivers/video/fbdev/udlfb.c:67:12-19: WARNING: Assignment of 0/1 to bool
variable
drivers/video/fbdev/udlfb.c:68:12-20: WARNING: Assignment of 0/1 to bool
variable
drivers/video/fbdev/udlfb.c:69:12-18: WARNING: Assignment of 0/1 to bool
variable
Jason Yan [Wed, 22 Apr 2020 07:18:26 +0000 (15:18 +0800)]
video: fbdev: i810: use true,false for bool variables
Fix the following coccicheck warning:
drivers/video/fbdev/i810/i810_main.c:1969:3-7: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1971:3-8: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1973:3-9: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1975:3-7: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:2001:3-9: WARNING: Assignment of
0/1 to bool variable
Nirmoy Das [Mon, 4 May 2020 15:40:35 +0000 (17:40 +0200)]
drm/mm: optimize rb_hole_addr rbtree search
Userspace can severely fragment rb_hole_addr rbtree by manipulating
alignment while allocating buffers. Fragmented rb_hole_addr rbtree
would result in large delays while allocating buffer object for a
userspace application. It takes long time to find suitable hole
because if we fail to find a suitable hole in the first attempt
then we look for neighbouring nodes using rb_prev()/rb_next().
Traversing rbtree using rb_prev()/rb_next() can take really long
time if the tree is fragmented.
This patch improves searches in fragmented rb_hole_addr rbtree by
modifying it to an augmented rbtree which will store an extra field
in drm_mm_node, subtree_max_hole. Each drm_mm_node now stores maximum
hole size for its subtree in drm_mm_node->subtree_max_hole. Using
drm_mm_node->subtree_max_hole, it is possible to eliminate a complete
subtree if that subtree is unable to serve a request hence reducing
number of rb_prev()/rb_next() used.
With this patch applied, 1 million bo allocs on amdgpu took ~8 sec,
compared to 50k bo allocs which took 28 sec without it.
partial test code:
int test_fragmentation(void)
{
int i = 0;
uint32_t minor_version;
uint32_t major_version;
for (i = 0; i < MAX_ALLOC; i++) {
amdgpu_bo_alloc(device_handle, &request, &vram_handle[i]);
}
for (i = 0; i < MAX_ALLOC; i++)
amdgpu_bo_free(vram_handle[i]);
return 0;
}
v2:
Use RB_DECLARE_CALLBACKS_MAX to maintain subtree_max_hole
v3:
insert_hole_addr() should be static a function
fix return value of next_hole_high_addr()/next_hole_low_addr() Reported-by: kbuild test robot <lkp@intel.com>
v4:
Fix commit message.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/364341/ Signed-off-by: Christian König <christian.koenig@amd.com>
Author: Christian König <christian.koenig@amd.com>
Date: Wed Sep 25 11:38:50 2019 +0200
drm/ttm: remove pointers to globals
Signed-off-by: Maya Rashish <coypu@sdf.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/360750/ Signed-off-by: Christian König <christian.koenig@amd.com>
drm/client: Dual licence the header in GPL-2 and MIT
Source file was dual licenced but the header was omitted, fix that.
Contributors for this file are:
Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper <matthew.d.roper@intel.com>
Maxime Ripard <mripard@kernel.org>
Noralf Trønnes <noralf@tronnes.org>
Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Emmanuel Vadot <manu@FreeBSD.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200430153347.85323-1-manu@FreeBSD.org
This is a driver for video encoder with VGA and DVI/HDMI outputs.
There is no documentation for the chip -- the operation was guessed from
what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names
come from the ch7035 driver in Mediatek's GPL code dump.
Only bare minimum is implemented -- no fancy stuff, such as scaling. That
would only worsen our misery. We don't load the firmware and we don't need
to even bother enabling the MCU. There are probably no distributable
firmware images anyway.
Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60,
with VGA as well as DVI.
Tomi Valkeinen [Wed, 29 Apr 2020 12:10:22 +0000 (15:10 +0300)]
drm/tidss: remove AM65x PG1 YUV erratum code
AM65x PG1 has a HW issue with YUV pixel formats, resulting in wrong
colors on the screen. This issue is fixed in PG2 hardware.
The driver currently has code to hide YUV pixel formats from the
userspace. To support PG2, we would need to add code to detect the SoC
version and hide the YUV formats based on that.
However, as PG1 will be phased out and PG2 will be the main platform, a
much simpler solution is just to drop the code in question. The downside
is that the users will be able to use YUV formats on PG1, getting wrong
colors on the screen. On the other hand, that may also be a plus, as the
same applications will now work on PG1 and PG2, even if the colors are
wrong on PG1.
Tomi Valkeinen [Fri, 17 Apr 2020 11:41:51 +0000 (14:41 +0300)]
drm/omap: change default signal polarities and drives
If the given videomode does not specify DISPLAY_FLAG_* for the specific
signal property, the driver used a default value. These defaults were
never thought through, as the expectation was that all the DISPLAY_FLAGS
are always set explicitly.
With DRM bridge and panel drivers this is not the case, and while that
issue should be resolved in the future, it's still good to have sane
signal defaults.
This patch changes the defaults to what the hardware has as reset
defaults. Also, based on my experience, I think they make sense and are
more likely correct than the defaults without this patch.
David Lu [Tue, 28 Apr 2020 06:45:21 +0000 (14:45 +0800)]
drm/panel: boe-tv101wum-n16: fine tune clock
fix boe_tv105wum_nw0 display shift.
Signed-off-by: David Lu <david.lu@bitland.com.cn> Fixes: 963518c12431 ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel") Cc: David Lu <david.lu@bitland.com.cn> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag] Link: https://patchwork.freedesktop.org/patch/msgid/20200428064521.21511-1-david.lu@bitland.com.cn
Adrian Ratiu [Thu, 23 Apr 2020 10:00:58 +0000 (13:00 +0300)]
dt-bindings: display: dw_mipi_dsi.txt: convert to yaml
This converts the Synopsis MIPI DSI binding documentation to yaml and
should be quite straightforward. I've added a missing ref clk and also
added Philippe as maintainer b/c he's the original txt author following
the algorithm provided in Message-ID 20200420175909.GA5810@ravnborg.org.
Cc: Philippe CORNU <philippe.cornu@st.com> Cc: devicetree@vger.kernel.org Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200423100058.1734009-1-adrian.ratiu@collabora.com
allen [Mon, 27 Apr 2020 09:16:52 +0000 (17:16 +0800)]
dt-bindings: fix vendor prefix for ITE Tech. Inc.
ITE Tech. Inc. (abbreviated as ITE ) is a professional fabless IC
design house. ITE's core technology includes PC and NB Controller chips,
Super I/O, High Speed Serial Interface, Video Codec, Touch Sensing,
Surveillance, OFDM, Sensor Fusion, and so on.
Our official name is "ITE Tech. Inc.", so change "ITE," to "ITE.".
more information on: http://www.ite.com.tw/
Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Acked-by: Rob Herring <robh@kernel.org> Fixes: 17ff9478ffa3 ("dt-bindings: Add ITE Tech prefix") Cc: Marek Vasut <marex@denx.de> Cc: devicetree@vger.kernel.org Cc: Allen Chen <allen.chen@ite.com.tw> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag and updated subject] Link: https://patchwork.freedesktop.org/patch/msgid/1587979103-5630-2-git-send-email-allen.chen@ite.com.tw
In the file drm_dp_helper.h we have a macro named
DP_DSC_THROUGHPUT_MODE_{0,1}_UPSUPPORTED, the correct name should be
DP_DSC_THROUGHPUT_MODE_{0,1}_UNSUPPORTED. This commits adjusts this typo
in the header file and in other places that attempt to access this
macro.
projects / mirror_ubuntu-kernels.git / log