Alexander Aring [Tue, 28 Oct 2014 17:21:29 +0000 (18:21 +0100)]
mac802154: remove channel attributes from sdata
These channel attributes was part of "channel context switch while xmit"
which was removed by commit dc67c6b30f36d57b70b70547a30e7a8432540c6f
("mac802154: tx: remove xmit channel context switch"). This patch
removes these unnecessary variables and use the current_page and
current_channel by wpan_phy struct now.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Tue, 28 Oct 2014 17:21:27 +0000 (18:21 +0100)]
mac802154: add synchronization handling
This patch adds synchronization handling in start and stop driver ops
calls. This patch is mostly grab from mac80211 which was introduced by
commit ea77f12f2cc0f31168f2e0259e65a22202ac4dc2 ("mac80211: remove
tasklet enable/disable"). This is to be sure that we don't run into same
issues.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Tue, 28 Oct 2014 17:21:26 +0000 (18:21 +0100)]
mac802154: move local started handling
This patch removes the current handling of started boolean. This is
actually dead code, because mac802154_netdev_register can't never be
called before ieee802154_register_hw. This means that local->started is
always be true when mac802154_netdev_register is called. Instead we
using this now like mac80211 to indicate that an instance of sdata is
running.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Tue, 28 Oct 2014 17:21:24 +0000 (18:21 +0100)]
mac802154: rework sdata state change to running
This patch reworks the handling for setting the state like mac80211. We
use bit's instead a bool variable. The mutex is not needed because it use
test and set bits which are atomic operations.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Tue, 28 Oct 2014 17:21:23 +0000 (18:21 +0100)]
mac802154: remove driver ops in wpan-phy
This patch removes the driver ops callbacks inside of wpan_phy struct.
It was used to check if a phy supports this driver ops call. We do this
now via hardware flags.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Tue, 28 Oct 2014 17:21:20 +0000 (18:21 +0100)]
mac802154: introduce driver-ops header
This patch introduce a driver-ops header file with function wrappers to
call the driver ops. These wrappers checking on right context
information and warn if optional driver ops are called when these aren't
implemented. This behaviour is like mac80211 driver-ops header file,
just without function tracing calls.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Tue, 28 Oct 2014 17:21:16 +0000 (18:21 +0100)]
mac802154: monitor: merge into iface implementation
This patch removes the monitor implementation file and put all monitor
stuff into iface file. It's now small enough to put all necessary
handling into iface.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Tue, 28 Oct 2014 21:23:27 +0000 (22:23 +0100)]
Bluetooth: Fix check for direct advertising
These days we allow simultaneous LE scanning and advertising. Checking
for whether advertising is enabled or not is therefore not a reliable
way to determine whether directed advertising was used to trigger the
connection creation. The appropriate place to check (instead of the hdev
context) is the connection role that's stored in the hci_conn. This
patch fixes such a check in le_conn_timeout() which could otherwise lead
to incorrect HCI commands being sent.
Johan Hedberg [Tue, 28 Oct 2014 21:23:26 +0000 (22:23 +0100)]
Bluetooth: Fix LE connection timeout deadlock
The le_conn_timeout() may call hci_le_conn_failed() which in turn may
call hci_conn_del(). Trying to use the _sync variant for cancelling the
conn timeout from hci_conn_del() could therefore result in a deadlock.
This patch converts hci_conn_del() to use the non-sync variant so the
deadlock is not possible.
Jukka Rissanen [Tue, 28 Oct 2014 15:16:48 +0000 (17:16 +0200)]
Bluetooth: 6lowpan: Fix lockdep splats
When a device ndo_start_xmit() calls again dev_queue_xmit(),
lockdep can complain because dev_queue_xmit() is re-entered and the
spinlocks protecting tx queues share a common lockdep class.
Same issue was fixed for ieee802154 in commit "20e7c4e80dcd"
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The reason for the revert is that we cannot have more than one module
initialization function and the SMP one breaks the build with modular
kernels. As the proper fix for this is right now looking non-trivial
it's better to simply revert the problematic patches in order to keep
the upstream tree compilable.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:43 +0000 (17:13 +0100)]
mac802154: rx: change naming convention
This patch changes the naming convention of mac802154 rx file. It should
be more named like mac80211 stack. Furthermore we introduce a new frame
parsing implementation which is much similar the mac80211
implementation.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:42 +0000 (17:13 +0100)]
at86rf230: improve receive handling
Current behaviour it to copy the frame inclusive CRC into a skb, then
remove the CRC from the skb. This patch optimizes this by not copying
the CRC at the first place.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:41 +0000 (17:13 +0100)]
at86rf230: use ieee802154_is_valid_psdu_len helper
This patch adds the ieee802154_is_valid_psdu_len function to validate
the psdu length. If the psdu length is invalid we use the maximum
payload to receive also corrupted frames in monitor mode.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:40 +0000 (17:13 +0100)]
ieee802154: add valid psdu length helper
This patch adds a generic valid psdu length check function helper. This
is useful to check the length field after receiving. For example the
at86rf231 doesn't filter invalid psdu length. Sometimes the CRC can also
be correct. If we get the lqi value with an invalid frame length the
kernel may crash because we dereference an invalid pointer in the
receive buffer.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:37 +0000 (17:13 +0100)]
mac802154: rx: add monitor pkt_type information
This patch adds a PACKET_OTHERHOST setting when a monitor interface
receives a skb. All receiving skb's to the monitor interface should
be PACKET_OTHERHOST.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:34 +0000 (17:13 +0100)]
mac802154: rx: rename remove mac802154_subif_rx
This patch removes the mac802154_subif_rx function and do the necessary
calls inside of ieee802154_rx function. The ieee802154_rx is small
enough to move the functionality inside this function.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:33 +0000 (17:13 +0100)]
mac802154: tx: remove monitor receive while xmit
This removes the call of monitor receive funktion when any interface
type call xmit. There exist no such use case that a monitor interface
should receive the actual sending frame. One use case could be that a
wpan interface and monitor interface could be running at the same time
on one phy. Then the monitor interface receives the wpan frames also.
Furthermore we adding support for promiscous mode setting. With
promiscous mode setting we can't run a wpan and monitor interface at the
same time.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:32 +0000 (17:13 +0100)]
mac802154: rx: move receive handling into rx.c
This patch removes all relevant receiving functions inclusive frame
parsing into rx file. Like mac80211 we should implement the complete
receive handling and parsing in this file.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch is similar like d20ef63d32461332958661df73e21c0ca42601b0
("mac80211: document ieee80211_rx() context requirement"). The
netif_receive_skb call requires with softirqs disabled. This patch
adds a warning if softirqs are pending while calling ieee802154_rx.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:30 +0000 (17:13 +0100)]
mac802154: rx: use tasklet instead workqueue
Tasklets have much less overhead than workqueues. This patch also
removes the heap allocation for the worker on receiving path.
Like mac80211 we should prefer use a tasklet here instead a workqueue to
getting fast out of interrupt context when ieee802154_rx_irqsafe is
called by driver. Like wireless inside the tasklet context we should
call netif_receive_skb instead netif_rx_ni anymore.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:29 +0000 (17:13 +0100)]
ieee802154: drivers: use dev_alloc_skb
This patch change the allocation of skb inside the ieee802154 driver
layer to dev_alloc_skb. This changes also the gfp mask to GFP_ATOMIC
which is needed for upcomming change that the receiving is done by a
tasklet and not a workqueue anymore.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 27 Oct 2014 16:13:28 +0000 (17:13 +0100)]
mac802154: tx: use put_unaligned_le16 for copy crc
This patch replaces the memcpy with a put_unaligned_le16. The placement
of crc inside of PSDU can also be unaligned. With memcpy this can fail
on some architectures.
Martin Townsend [Thu, 23 Oct 2014 14:40:53 +0000 (15:40 +0100)]
6lowpan: remove skb_deliver from IPHC
Separating skb delivery from decompression ensures that we can support further
decompression schemes and removes the mixed return value of error codes with
NET_RX_FOO.
Signed-off-by: Martin Townsend <mtownsend1973@gmail.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sun, 26 Oct 2014 17:15:34 +0000 (18:15 +0100)]
mac802154: tx: make worker information static
This patch moves the worker information struct out of skb control block.
Instead control block we declare it static inside of tx.c file. We can do
that, because the worker can't be used twice at the same time. It's
protected by stop and wake netdev queue.
This patch fix an issue that the "struct ieee802154_xmit_cb" doesn't fit
into the skb control block on some kernel configuartion reported by
kbuild test robot.
Alexander Aring [Sun, 26 Oct 2014 08:37:15 +0000 (09:37 +0100)]
at86rf230: asynchronous xmit handling
This patch converts the sync xmit handling into an async xmit handling. The
driver was already prepared for this step, all other drivers need more
work to implement a xmit_async function.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sun, 26 Oct 2014 08:37:14 +0000 (09:37 +0100)]
mac802154: tx: add comment at sync xmit callback
This patch adds a warning that xmit_sync callback is deprecated and
should be removed soon. The 802.15.4 subsystem will not accept synced
drivers anymore.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sun, 26 Oct 2014 08:37:08 +0000 (09:37 +0100)]
mac802154: tx: add support for xmit_async callback
This patch renames the existsing xmit callback to xmit_sync and
introduces an asynchronous xmit_async function. If ieee802154_ops
doesn't provide the xmit_async callback, then we have a fallback to
the xmit_sync callback.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sun, 26 Oct 2014 08:37:05 +0000 (09:37 +0100)]
mac802154: add netdev qeue helpers
This patch adds a new file net/mac802154/util.c which contains utility
functions for drivers, etc. This file contains functions to start and
stop queues for all virtual interfaces, this is useful for asynchronous
handling by driver level.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sun, 26 Oct 2014 08:37:04 +0000 (09:37 +0100)]
mac802154: tx: remove xmit channel context switch
This patch removes the channel hopping feature before xmit. There are
several issues to provide a real channel hopping (timing requirements,
etc...).
We don't have any known kernelspace protocol which really use this
feature. And I don't know an real user of this feature.
We simply drop this feature now.
This patch removes also the hold of pib lock which isn't needed by any
real driver xmit callback implementation.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sun, 26 Oct 2014 08:37:02 +0000 (09:37 +0100)]
mac802154: tx: remove kmalloc in xmit hotpath
This patch removes the kmalloc allocation for workqueue data. This patch
replaces the kmalloc and uses the control block of skb. The control block
has enough space and isn't use by any other layer in this case.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 15:16:40 +0000 (17:16 +0200)]
mac802154: introduce IEEE802154_DEV_TO_SUB_IF
This function adds a wrapper to call netdev_priv to getting the sdata
attribute. This is similar like the IEEE80211_DEV_TO_SUB_IF function
inside wireless stack implementation.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 15:16:39 +0000 (17:16 +0200)]
mac802154: introduce hw_to_local function
This patch replace the mac802154_to_priv macro with a static inline
function named hw_to_local. This brings a similar naming convention like
mac80211 stack.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 15:16:38 +0000 (17:16 +0200)]
mac802154: rename sdata slaves and slaves_mtx
This patch renamens the slaves attribute in sdata to interfaces and
slaves_mtx to iflist_mtx. This is similar like the mac80211 stack naming
convention.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 15:16:37 +0000 (17:16 +0200)]
mac802154: rename hw subif_data variable to local
This patch renames the hw attribute in struct ieee802154_sub_if_data to
local. This avoid confusing with the struct ieee802154_hw hw; inside of
local struct.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 15:16:36 +0000 (17:16 +0200)]
mac802154: rename mac802154_sub_if_data
Like wireless this structure should named ieee802154_sub_if_data and not
mac802154_sub_if_data. This patch renames the struct and variables to
sdata instead priv sometimes.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 15:16:34 +0000 (17:16 +0200)]
ieee802154: rename ieee802154_dev to ieee802154_hw
The identical struct of the wireless stack implementation is named
ieee80211_hw. This is useful to name the variable hw instead of get
confusing with netdev dev variable.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 07:41:04 +0000 (09:41 +0200)]
ieee802154: move ieee802154 header
This patch moves the ieee802154 header into include/linux instead
include/net. Similar like wireless which have the ieee80211 header
inside of include/linux.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 07:41:02 +0000 (09:41 +0200)]
ieee802154: move wpan-phy.h to cfg802154.h
The wpan-phy header contains the wpan_phy struct information. Later this
header will be have similar function like cfg80211 header. The cfg80211
header contains the wiphy struct which is identically the wpan_phy
struct inside 802.15.4 subsystem.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 07:41:01 +0000 (09:41 +0200)]
mac802154: move wpan.c to iface.c
The wpan.c file contains the interface handling functions now. It's similar
like the mac80211 iface.c file. This patch renames this file to iface.c to
have similar naming convention in mac802154.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 07:41:00 +0000 (09:41 +0200)]
mac802154: move mac802154.h to ieee802154_i.h
This patch moves the mac802154.h internal header to ieee802154_i.h like
the wireless stack ieee80211_i.h file. This avoids confusing with the
not internal header include/net/mac802154.h header. Additional we get
the same naming conversion like mac80211 for this file.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Sat, 25 Oct 2014 07:40:59 +0000 (09:40 +0200)]
mac802154: move ieee802154_dev.c to main.c
The ieee802154_dev functionality contains various function for
allocation and registration of an ieee802154_dev. This is equal to the
net/mac80211/main.c file. This patch rename the ieee802154_dev.c to
main.c to have the same behaviour.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Sat, 25 Oct 2014 19:15:38 +0000 (21:15 +0200)]
Bluetooth: Add skeleton for SMP self-tests
This patch adds a basic skeleton for SMP self-tests. The tests are put
behind a new configuration option since running them will slow down the
boot process. For now there are no actual tests defined but those will
come in a subsequent patch.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Sat, 25 Oct 2014 19:15:37 +0000 (21:15 +0200)]
Bluetooth: Pass only crypto context to SMP crypto functions
In order to make unit testing possible we need to make the SMP crypto
functions only take the crypto context instead of the full SMP context
(the latter would require having hci_dev, hci_conn, l2cap_chan,
l2cap_conn, etc around). The drawback is that we no-longer get the
involved hdev in the debug logs, but this is really the only way to make
simple unit tests for the code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Martin Townsend [Mon, 13 Oct 2014 10:00:56 +0000 (11:00 +0100)]
6lowpan: Use skb_cow in IPHC decompression.
Currently there are potentially 2 skb_copy_expand calls in IPHC
decompression. This patch replaces this with one call to
skb_cow which will check to see if there is enough headroom
first to ensure it's only done if necessary and will handle
alignment issues for cache.
As skb_cow uses pskb_expand_head we ensure the skb isn't shared from
bluetooth and ieee802.15.4 code that use the IPHC decompression.
Signed-off-by: Martin Townsend <martin.townsend@xsilon.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Value returned by this macro might be used as bit value so it should
return either 0 or 1 to avoid possible bugs (similar to NSC bug)
when shifting it.
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Szymon Janc [Mon, 13 Oct 2014 09:43:53 +0000 (11:43 +0200)]
Bluetooth: Fix RFCOMM NSC response
rfcomm_send_nsc expects CR to be either 0 or 1 since it is later
passed to __mcc_type macro and shitfed. Unfortunatelly CR extracted
from received frame type was not sanitized and shifted value was passed
resulting in bogus response.
Note: shifted value was also passed to other functions but was used
only in if satements so this bug appears only for NSC case.
The CR bit in the value octet shall be set to the same value
as the CR bit in the type field octet of the not supported command
frame but the CR bit for NCS response should be set to 0 since it is
always a response.
This was affecting TC_RFC_BV_25_C PTS qualification test.
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Alfonso Acosta [Sat, 11 Oct 2014 21:44:47 +0000 (21:44 +0000)]
Bluetooth: Defer connection-parameter removal when unpairing
Systematically removing the LE connection parameters and autoconnect
action is inconvenient for rebonding without disconnecting from
userland (i.e. unpairing followed by repairing without
disconnecting). The parameters will be lost after unparing and
userland needs to take care of book-keeping them and re-adding them.
This patch allows userland to forget about parameter management when
rebonding without disconnecting. It defers clearing the connection
parameters when unparing without disconnecting, giving a chance of
keeping the parameters if a repairing happens before the connection is
closed.
Signed-off-by: Alfonso Acosta <fons@spotify.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Alexander Aring [Mon, 13 Oct 2014 08:33:06 +0000 (10:33 +0200)]
ieee802154: 6lowpan: improve packet registration
This patch improves the packet registration handling. Instead of
registration with module init we have a open count variable and
registration the lowpan packet handler when it's needed.
The open count variable should be protected by RTNL.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alfonso Acosta [Tue, 7 Oct 2014 08:44:11 +0000 (08:44 +0000)]
Bluetooth: Include ADV_IND report in Device Connected event
There are scenarios when autoconnecting to a device after the
reception of an ADV_IND report (action 0x02), in which userland
might want to examine the report's contents.
For instance, the Service Data might have changed and it would be
useful to know ahead of time before starting any GATT procedures.
Also, the ADV_IND may contain Manufacturer Specific data which would
be lost if not propagated to userland. In fact, this patch results
from the need to rebond with a device lacking persistent storage which
notifies about losing its LTK in ADV_IND reports.
This patch appends the ADV_IND report which triggered the
autoconnection to the EIR Data in the Device Connected event.
Signed-off-by: Alfonso Acosta <fons@spotify.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Alfonso Acosta [Tue, 7 Oct 2014 08:44:10 +0000 (08:44 +0000)]
Bluetooth: Refactor arguments of mgmt_device_connected
The values of a lot of the mgmt_device_connected() parameters come
straight from a hci_conn object. We can simplify the function by passing
the full hci_conn pointer to it.
Signed-off-by: Alfonso Acosta <fons@spotify.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
projects / mirror_ubuntu-zesty-kernel.git / log