Dumitru Ceara [Thu, 28 May 2020 12:32:17 +0000 (14:32 +0200)]
ovsdb-server.7: Mention update3 as replies to monitor_cond_change.
Monitor_cond_change might trigger updates to be sent to clients as results
to condition changes. These updates can be either update2 (for monitor_cond
monitors) or update3 (for monitor_cond_since monitors). The documentation
used to mention only update2.
Signed-off-by: Dumitru Ceara <dceara@redhat.com> Acked-by: Han Zhou <hzhou@ovn.org> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Ilya Maximets [Wed, 3 Jun 2020 14:58:16 +0000 (16:58 +0200)]
ovs-rcu: Avoid flushing callbacks during postponing.
ovsrcu_flush_cbset() call during ovsrcu_postpone() could cause
use after free in case the caller sets new pointer only after
postponing free for the old one:
Vlad Buslov [Thu, 4 Jun 2020 10:47:01 +0000 (13:47 +0300)]
tc: Support new terse dump kernel API
When dumping flows in terse mode set TCA_DUMP_FLAGS attribute to
TCA_DUMP_FLAGS_TERSE flag to prevent unnecessary copying of data between
kernel and user spaces. Only expect kernel to provide cookie, stats and
flags when dumping filters in terse mode.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Simon Horman <simon.horman@netronome.com>
Vlad Buslov [Thu, 4 Jun 2020 10:47:00 +0000 (13:47 +0300)]
netdev-offload: Implement terse dump support
In order to improve revalidator performance by minimizing unnecessary
copying of data, extend netdev-offloads to support terse dump mode. Extend
netdev_flow_api->flow_dump_create() with 'terse' bool argument. Implement
support for terse dump in functions that convert netlink to flower and
flower to match. Set flow stats "used" value based on difference in number
of flow packets because lastuse timestamp is not included in TC terse dump.
Kernel API support is implemented in following patch.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Simon Horman <simon.horman@netronome.com>
Tonghao Zhang [Tue, 2 Jun 2020 13:50:25 +0000 (21:50 +0800)]
netdev-offload-tc: Expand tunnel source IPs masked match
To support more use case, for example, DDOS, which
packets should be dropped in hardware, this patch
allows users to match only the tunnel source IPs with
masked value.
Tonghao Zhang [Tue, 2 Jun 2020 13:50:24 +0000 (21:50 +0800)]
netdev-offload-tc: Allow to match the IP and port mask of tunnel
This patch allows users to offload the TC flower rules with
tunnel mask. This patch allows masked match of the following,
where previously supported an exact match was supported:
* Remote (dst) tunnel endpoint address
* Local (src) tunnel endpoint address
* Remote (dst) tunnel endpoint UDP port
And also allows masked match of the following, where previously
no match was supported:
* Local (src) tunnel endpoint UDP port
In some case, mask is useful as wildcards. For example, DDOS,
in that case, we don’t want to allow specified hosts IPs or
only source Ports to access the targeted host. For example:
Tonghao Zhang [Tue, 2 Jun 2020 13:50:22 +0000 (21:50 +0800)]
dpif-netlink: Generate ufids for installing TC flowers
To support installing the TC flowers to HW, via "ovs-appctl dpctl/add-flow"
command, there should be an ufid. This patch will check whether ufid exists,
if not, generate an ufid. Should to know that when processing upcall packets,
ufid is generated in parse_odp_packet for kernel datapath.
Configuring the max-idle/max-revalidator, may help testing this patch.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Simon Horman <simon.horman@netronome.com>
Ilya Maximets [Mon, 25 May 2020 16:21:39 +0000 (18:21 +0200)]
ovsdb: Fix timeout type for wait operation.
According to RFC 7047, 'timeout' is an integer field:
5.2.6. Wait
The "wait" object contains the following members:
"op": "wait" required
"timeout": <integer> optional
...
For some reason initial implementation treated it as a real number.
This causes a build issue with clang that complains that LLONG_MAX
could not be represented as double:
ovsdb/execution.c:733:32: error: implicit conversion from 'long long'
to 'double' changes value from 9223372036854775807 to 9223372036854775808
timeout_msec = MIN(LLONG_MAX, json_real(timeout));
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/sys/limits.h:69:19: note: expanded from macro 'LLONG_MAX'
#define LLONG_MAX __LLONG_MAX /* max for a long long */
^~~~~~~~~~~
/usr/include/x86/_limits.h:74:21: note: expanded from macro '__LLONG_MAX'
#define __LLONG_MAX 0x7fffffffffffffffLL /* max value for a long long */
^~~~~~~~~~~~~~~~~~~~
./lib/util.h:90:21: note: expanded from macro 'MIN'
#define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
^ ~
Fix that by changing parser to treat 'timeout' as integer.
Fixes clang build on FreeBSD 12.1 in CirrusCI.
Fixes: f85f8ebbfac9 ("Initial implementation of OVSDB.") Acked-by: Han Zhou <hzhou@ovn.org> Acked-by: Numan Siddique <numans@ovn.org> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Mark Michelson [Fri, 1 May 2020 19:13:08 +0000 (15:13 -0400)]
ovsdb-idl: Add function to reset min_index.
If an administrator removes all of the databases in a cluster from
disk, then ovsdb IDL clients will have a problem. The databases will all
reset their stored indexes to 0, so The IDL client's min_index will be
higher than the indexes of all databases in the cluster. This results in
the client constantly connecting to databases, detecting the data as
"stale", and then attempting to connect to another.
This function provides a way to reset the IDL to an initial state with
min_index of 0. This way, the client will not wrongly detect the
database data as stale and will recover properly.
Notice that this function is not actually used anywhere in this patch.
This will be used by OVN, though, since OVN is the primary user of
clustered OVSDB.
Signed-off-by: Mark Michelson <mmichels@redhat.com> Acked-by: Han Zhou <hzhou@ovn.org> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
openvswitch: add missing attribute validation for hash
Add missing attribute validation for OVS_PACKET_ATTR_HASH
to the netlink policy.
Fixes: bd1903b7c459 ("net: openvswitch: add hash info to upcall") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
commit bd1903b7c4596ba6f7677d0dfefd05ba5876707d
Author: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Date: Wed Nov 13 23:04:49 2019 +0800
net: openvswitch: add hash info to upcall
When using the kernel datapath, the upcall don't
include skb hash info relatived. That will introduce
some problem, because the hash of skb is important
in kernel stack. For example, VXLAN module uses
it to select UDP src port. The tx queue selection
may also use the hash in stack.
Hash is computed in different ways. Hash is random
for a TCP socket, and hash may be computed in hardware,
or software stack. Recalculation hash is not easy.
Hash of TCP socket is computed:
tcp_v4_connect
-> sk_set_txhash (is random)
__tcp_transmit_skb
-> skb_set_hash_from_sk
There will be one upcall, without information of skb
hash, to ovs-vswitchd, for the first packet of a TCP
session. The rest packets will be processed in Open vSwitch
modules, hash kept. If this tcp session is forward to
VXLAN module, then the UDP src port of first tcp packet
is different from rest packets.
TCP packets may come from the host or dockers, to Open vSwitch.
To fix it, we store the hash info to upcall, and restore hash
when packets sent back.
+---------------+ +-------------------------+
| Docker/VMs | | ovs-vswitchd |
+----+----------+ +-+--------------------+--+
| ^ |
| | |
| | upcall v restore packet hash
(not recalculate)
| +-+--------------------+--+
| tap netdev | | vxlan module
+---------------> +--> Open vSwitch ko +-->
or internal type | |
+-------------------------+
Reported-at: https://mail.openvswitch.org/pipermail/ovs-dev/2019-October/364062.html Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Aliasgar Ginwala <aginwala@ebay.com> Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: Han Zhou <hzhou@ovn.org> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Eiichi Tsukata [Wed, 27 May 2020 02:13:34 +0000 (11:13 +0900)]
classifier: Prevent tries vs n_tries race leading to NULL dereference.
Currently classifier tries and n_tries can be updated not atomically,
there is a race condition which can lead to NULL dereference.
The race can happen when main thread updates a classifier tries and
n_tries in classifier_set_prefix_fields() and at the same time revalidator
or handler thread try to lookup them in classifier_lookup__(). Such race
can be triggered when user changes prefixes of flow_table.
[main thread] [revalidator/handler thread]
===========================================================
/* cls->n_tries == 2 */
for (int i = 0; i < cls->n_tries; i++) {
trie_init(cls, i, NULL);
/* n_tries == 0 */
cls->n_tries = n_tries;
/* cls->tries[i]->feild is NULL */
trie_ctx_init(&trie_ctx[i],&cls->tries[i]);
/* trie->field is NULL */
ctx->be32ofs = trie->field->flow_be32ofs;
To prevent the race, instead of re-introducing internal mutex
implemented in the commit fccd7c092e09 ("classifier: Remove internal
mutex."), this patch makes trie field RCU protected and checks it after
read.
Ilya Maximets [Fri, 22 May 2020 20:36:27 +0000 (22:36 +0200)]
raft: Avoid sending equal snapshots.
Snapshots are huge. In some cases we could receive several outdated
append replies from the remote server. This could happen in high
scale cases if the remote server is overloaded and not able to process
all the raft requests in time. As an action to each outdated append
reply we're sending full database snapshot. While remote server is
already overloaded those snapshots will stuck in jsonrpc backlog for
a long time making it grow up to few GB. Since remote server wasn't
able to timely process incoming messages it will likely not able to
process snapshots leading to the same situation with low chances to
recover. Remote server will likely stuck in 'candidate' state, other
servers will grow their memory consumption due to growing jsonrpc
backlogs:
jsonrpc|INFO|excessive sending backlog, jsonrpc: ssl:192.16.0.3:6644,
num of msgs: 3795, backlog: 8838994624.
This patch is trying to avoid that situation by avoiding sending of
equal snapshot install requests. This helps maintain reasonable memory
consumption and allows the cluster to recover on a larger scale.
Acked-by: Han Zhou <hzhou@ovn.org> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Ilya Maximets [Thu, 14 May 2020 20:10:45 +0000 (22:10 +0200)]
ovsdb-server: Fix schema leak while reading db.
parse_txn() function doesn't always take ownership of the 'schema'
passed. So, if the schema of the clustered db has same version as the
one that already in use, parse_txn() will not use it, resulting with a
memory leak:
7,827 (56 direct, 7,771 indirect) bytes in 1 blocks are definitely lost
at 0x483BB1A: calloc (vg_replace_malloc.c:762)
by 0x44AD02: xcalloc (util.c:121)
by 0x40E70E: ovsdb_schema_create (ovsdb.c:41)
by 0x40EA6D: ovsdb_schema_from_json (ovsdb.c:217)
by 0x415EDD: ovsdb_storage_read (storage.c:280)
by 0x408968: read_db (ovsdb-server.c:607)
by 0x40733D: main_loop (ovsdb-server.c:227)
by 0x40733D: main (ovsdb-server.c:469)
While we could put ovsdb_schema_destroy() in a few places inside
'parse_txn()', from the users' point of view it seems better to have a
constant argument and just clone the 'schema' if needed. The caller
will be responsible for destroying the 'schema' it owns.
Fixes: 1b1d2e6daa56 ("ovsdb: Introduce experimental support for clustered databases.") Acked-by: Han Zhou <hzhou@ovn.org> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Ilya Maximets [Fri, 22 May 2020 16:31:19 +0000 (18:31 +0200)]
ovsdb: Add raft memory usage to memory report.
Memory reports could be found in logs or by calling 'memory/show'
appctl command. For ovsdb-server it includes information about db
cells, monitor connections with their backlog size, etc. But it
doesn't contain any information about memory consumed by raft.
Backlogs of raft connections could be insanely large because of
snapshot installation requests that simply contains the whole database.
In not that healthy clusters where one of ovsdb servers is not able to
timely handle all the incoming raft traffic, backlog on a sender's side
could cause significant memory consumption issues.
Adding new 'raft-connections' and 'raft-backlog' counters to the
memory report to better track such conditions.
Acked-by: Han Zhou <hzhou@ovn.org> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
And with the following calls:
ovsdb_idl_txn_write_clone
ovsdb_idl_txn_write__
6. deref_parm_in_call: Function ovsdb_datum_destroy dereferences
datum->values
ovsdb_datum_destroy
Reviewed-by: Yifeng Sun <pkusunyifeng@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
William Tu [Thu, 14 May 2020 14:02:43 +0000 (07:02 -0700)]
ovs-bugtool: Add -m option to dump-flows.
This patch adds 'ovs-appctl dpctl/dump-flows -m' to bugtool,
the output will include wildcarded fields and the miniflow bits,
such as 'dp-extra-info:miniflow_bits(4,1)'.
Cc: Emma Finn <emma.finn@intel.com> Acked-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
Greg Rose [Tue, 19 May 2020 22:01:46 +0000 (15:01 -0700)]
Documentation: Fix kernel support matrix
The documentation matrix for OVS branches and which kernels they support
is out of date. Update it to show that since 2.10 the lowest kernel
that we test and support is Linux 3.16.
RHEL and CentOS kernels based upon the original 3.10 kernel are still
supported.
Reported-by: Han Zhou <hzhou@ovn.org>
Reported-at: https://mail.openvswitch.org/pipermail/ovs-dev/2020-May/370742.html Acked-by: Han Zhou <hzhou@ovn.org> Signed-off-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
Aaron Conole [Fri, 15 May 2020 20:36:18 +0000 (16:36 -0400)]
netdev-linux: Update LAG in all cases.
In some cases, when processing a netlink change event, it's possible for
an alternate part of OvS (like the IPv6 endpoint processing) to hold an
active netdev interface. This creates a race-condition, where sometimes
the OvS change processing will take the normal path. This doesn't work
because the netdev device object won't actually be enslaved to the
ovs-system (for instance, a linux bond) and ingress qdisc entries will
be missing.
To address this, we update the LAG information in ALL cases where
LAG information could come in.
Fixes: d22f8927c3c9 ("netdev-linux: monitor and offload LAG slaves to TC") Cc: Marcelo Leitner <mleitner@redhat.com> Cc: John Hurley <john.hurley@netronome.com> Acked-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Ansis Atteka [Fri, 15 May 2020 19:08:13 +0000 (12:08 -0700)]
debian: Add python3-sphinx to ovs build dependencies
python3-sphinx has become mandatory build dependency since patch 39b5e46 ("Documentation: Convert multiple manpages to ReST."), because,
otherwise, without this dependency installed, packaging of OVS debian
packages fails with an error that generated man pages can't be found.
Fixes: 39b5e46312 ("Documentation: Convert multiple manpages to ReST.") CC: Ben Pfaff <blp@ovn.org> Signed-off-by: Ansis Atteka <aatteka@ovn.org> Reported-by: Artem Teleshev <artem.teleshev@gmail.com> Acked-by: Greg Rose <gvrose8192@gmail.com>
Roi Dayan [Thu, 14 May 2020 13:25:10 +0000 (16:25 +0300)]
debian: Fix package dependencies
In python2 package was python-twisted-conch but it looks like
for python3 it's just python3-twisted.
For zope interface the python3 package name is python3-zope.interface.
Fixes: 1ca0323e7c29 ("Require Python 3 and remove support for Python 2.") Signed-off-by: Roi Dayan <roid@mellanox.com> Acked-by: Ansis Atteka <aatteka@ovn.org>
From man ovs-fields(7), the conntrack origin tuple fields
ct_nw_src/dst, ct_ipv6_src/dst, and ct_tp_src/dst are supposed
to be bitwise maskable, but they are not. This patch enables
those fields to be maskable, and adds a regression test.
Fixes: daf4d3c18da4 ("odp: Support conntrack orig tuple key.") Reported-by: Wenying Dong <wenyingd@vmware.com> Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
William Tu [Tue, 24 Mar 2020 22:10:50 +0000 (15:10 -0700)]
userspace: Enable TSO support for non-DPDK.
This patch enables TSO support for non-DPDK use cases, and
also add check-system-tso testsuite. Before TSO, we have to
disable checksum offload, allowing the kernel to calculate the
TCP/UDP packet checsum. With TSO, we can skip the checksum
validation by enabling checksum offload, and with large packet
size, we see better performance.
Consider container to container use cases:
iperf3 -c (ns0) -> veth peer -> OVS -> veth peer -> iperf3 -s (ns1)
And I got around 6Gbps, similar to TSO with DPDK-enabled.
Acked-by: Flavio Leitner <fbl@sysclose.org> Acked-by: Ilya Maximets <i.maximets@ovn.org> Signed-off-by: William Tu <u9012063@gmail.com>
Mark Michelson [Fri, 8 May 2020 21:00:27 +0000 (17:00 -0400)]
RAFT: Add clarifying note for cluster/leave operation.
We had a user express confusion about the state of a cluster after using
cluster/leave. The user had a three server cluster and used
cluster/leave to remove two servers from the cluster. The user expected
that the single server left would not function since the quorum of two
servers for a three server cluster was not met.
In actuality, cluster/leave removes the server from the cluster and
alters the cluster size in the process. Thus the single remaining server
continued to function since quorum was reached.
This documentation change makes it a bit more explicit that
cluster/leave alters the size of the cluster and cites the three server
down to one server case as an example.
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=1798158 Acked-by: Han Zhou <hzhou@ovn.org> Signed-off-by: Mark Michelson <mmichels@redhat.com> Signed-off-by: Ben Pfaff <blp@ovn.org>
Zhen Wang [Tue, 31 Mar 2020 00:21:04 +0000 (17:21 -0700)]
raft: Disable RAFT jsonrpc inactivity probe.
With the scale test of 640 nodes k8s cluster, raft DB nodes' jsonrpc
session got closed due to the timeout of default 5 seconds probe.
It will cause disturbance of the raft cluster. Since we already have
the heartbeat for RAFT, just disable the probe between the servers
to avoid the unnecessary jsonrpc inactivity probe.
Acked-by: Han Zhou <hzhou@ovn.org> Signed-off-by: Zhen Wang <zhewang@nvidia.com> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
And with the following calls:
ovsdb_idl_txn_write_clone
ovsdb_idl_txn_write__
6. deref_parm_in_call: Function ovsdb_datum_destroy dereferences
datum->values
ovsdb_datum_destroy
And another possible NULL deref is at ovsdb_datum_equals(). Fix the
two by adding additional checks.
Reviewed-by: Yifeng Sun <pkusunyifeng@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
William Tu [Sat, 2 May 2020 16:08:26 +0000 (09:08 -0700)]
ovsdb-idlc: Fix memory leak reported by Coverity.
An exmplae pattern shown below:
void
ovsrec_ct_zone_index_set_external_ids(const struct ovsrec_ct_zone...
{
// 1. alloc_fn: Storage is returned from allocation function xmalloc.
// 2. var_assign: Assigning: datum = storage returned from xmalloc(24UL).
struct ovsdb_datum *datum = xmalloc(sizeof(struct ovsdb_datum));
// 3. Condition external_ids, taking false branch.
if (external_ids) {
...
} else {
// 4. noescape: Resource datum is not freed or pointed-to in ovsdb_datum_init_empty.
ovsdb_datum_init_empty(datum);
}
// 5. noescape: Resource datum is not freed or pointed-to in ovsdb_idl_index_write.
ovsdb_idl_index_write(CONST_CAST(struct ovsdb_idl_row *, &row->header_),
&ovsrec_ct_zone_columns[OVSREC_CT_ZONE_COL_EXTERNAL_IDS],
datum,
&ovsrec_table_classes[OVSREC_TABLE_CT_ZONE]);
// CID 1420856 (#1 of 1): Resource leak (RESOURCE_LEAK)
// 6. leaked_storage: Variable datum going out of scope leaks the storage it
points to.
Fix it by freeing the datum.
Reviewed-by: Yifeng Sun <pkusunyifeng@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
William Tu [Sat, 2 May 2020 16:01:48 +0000 (09:01 -0700)]
ovsdb-idlc: Fix memory leak reported by Coverity.
Coverity shows the following memory leak in this code pattern:
void
ovsrec_ipfix_index_set_obs_domain_id(...
{
struct ovsdb_datum datum;
// 1. alloc_fn: Storage is returned from allocation function xmalloc.
// 2. var_assign: Assigning: key = storage returned from xmalloc(16UL).
union ovsdb_atom *key = xmalloc(sizeof(union ovsdb_atom));
Ilya Maximets [Mon, 4 May 2020 19:55:41 +0000 (21:55 +0200)]
raft: Fix leak of the incomplete command.
Function raft_command_initiate() returns correctly referenced command
instance. 'n_ref' equals 1 for complete commands and 2 for incomplete
commands because one more reference is in raft->commands list.
raft_handle_execute_command_request__() leaks the reference by not
returning pointer anywhere and not unreferencing incomplete commands.
792 bytes in 11 blocks are definitely lost in loss record 258 of 262
at 0x483BB1A: calloc (vg_replace_malloc.c:762)
by 0x44BA32: xcalloc (util.c:121)
by 0x422E5F: raft_command_create_incomplete (raft.c:2038)
by 0x422E5F: raft_command_initiate (raft.c:2061)
by 0x428651: raft_handle_execute_command_request__ (raft.c:4161)
by 0x428651: raft_handle_execute_command_request (raft.c:4177)
by 0x428651: raft_handle_rpc (raft.c:4230)
by 0x428651: raft_conn_run (raft.c:1445)
by 0x428DEA: raft_run (raft.c:1803)
by 0x407392: main_loop (ovsdb-server.c:226)
by 0x407392: main (ovsdb-server.c:469)
Fixes: 1b1d2e6daa56 ("ovsdb: Introduce experimental support for clustered databases.") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Han Zhou <hzhou@ovn.org> Signed-off-by: William Tu <u9012063@gmail.com>
William Tu [Wed, 29 Apr 2020 19:25:11 +0000 (12:25 -0700)]
userspace: Add conntrack timeout policy support.
Commit 1f1613183733 ("ct-dpif, dpif-netlink: Add conntrack timeout
policy support") adds conntrack timeout policy for kernel datapath.
This patch enables support for the userspace datapath. I tested
using the 'make check-system-userspace' which checks the timeout
policies for ICMP and UDP cases.
Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Yi-Hung Wei <yihung.wei@gmail.com>
netdev-linux: remove sum of vport stats and kernel netdev stats.
When using kernel veth as OVS interface, doubled drop counter
value is shown when veth drops packets due to traffic overrun.
In netdev_linux_get_stats, it reads both vport stats and kernel
netdev stats, in case vport stats retrieve failure. If both of
them success, error counters are added to include errors from
different layers. But implementation of ovs_vport_get_stats in
kernel data path has included kernel netdev stats by calling
dev_get_stats. When drop or other error counters is not zero,
its value is doubled by netdev_linux_get_stats.
In this change, adding kernel netdev stats into vport stats
is removed, since vport stats includes all information of
kernel netdev stats.
Signed-off-by: Jiang Lidong <jianglidong3@jd.com> Signed-off-by: William Tu <u9012063@gmail.com>
William Tu [Wed, 29 Apr 2020 17:30:26 +0000 (10:30 -0700)]
ovs-bugtool: Add ethtool -l for combined channel.
Users of netdev-afxdp has to setup the combined channel
on physical NIC. This helps debugging related issues.
Example output:
$ ethtool -l enp3s0f0
Channel parameters for enp3s0f0:
Pre-set maximums:
RX: 0
TX: 0
Other: 1
Combined: 63
Current hardware settings:
RX: 0
TX: 0
Other: 1
Combined: 1
Some previous discussion:
https://mail.openvswitch.org/pipermail/ovs-dev/2020-January/366631.html
Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Yi-Hung Wei <yihung.wei@gmail.com>
This patch adds a new OpenFlow action, delete field, to delete a
field in packets. Currently, only the tun_metadata fields are
supported.
One use case to add this action is to support multiple versions
of geneve tunnel metadatas to be exchanged among different versions
of networks. For example, we may introduce tun_metadata2 to
replace old tun_metadata1, but still want to provide backward
compatibility to the older release. In this case, in the new
OpenFlow pipeline, we would like to support the case to receive a
packet with tun_metadata1, do some processing. And if the packet
is going to a switch in the newer release, we would like to delete
the value in tun_metadata1 and set a value into tun_metadata2.
Currently, ovs does not provide an action to remove a value in
tun_metadata if the value is present. This patch fulfills the gap
by adding the delete_field action. For example, the OpenFlow
syntax to delete tun_metadata1 is:
actions=delete_field:tun_metadata1
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: William Tu <u9012063@gmail.com>
William Tu [Tue, 14 Apr 2020 13:22:55 +0000 (06:22 -0700)]
netdev-afxdp: Add interrupt mode netdev class.
The patch adds a new netdev class 'afxdp-nonpmd' to enable afxdp
interrupt mode. This is similar to 'type=afxdp', except that the
is_pmd field is set to false. As a result, the packet processing
is handled by main thread, not pmd thread. This avoids burning
the CPU to always 100% when there is no traffic.
Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
ovsdb_function_from_string() and ovsdb_function_to_string() are defined
both in ovsdb/condition.c and lib/ovsdb-condidtion.c with the same function
definition. Remove the one in ovsdb/condition.c to avoid duplication.
This also resolves the following bazel building error.
./libopenvswitch.lo(ovsdb-condition.pic.o): In function `ovsdb_function_from_string':
/lib/ovsdb-condition.c:24: multiple definition of `ovsdb_function_from_string'
./libovsdb.a(condition.pic.o):/proc/self/cwd/external/openvswitch_repo/ovsdb/condition.c:34: first defined here
./libopenvswitch.lo(ovsdb-condition.pic.o): In function `ovsdb_function_from_string':
./lib/ovsdb-condition.c:24: multiple definition of `ovsdb_function_to_string'
./libovsdb.a(condition.pic.o):/proc/self/cwd/external/openvswitch_repo/ovsdb/condition.c:335
Reported-by: Harold Lim <haroldl@vmware.com> Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
Anton Ivanov [Tue, 21 Apr 2020 08:23:57 +0000 (09:23 +0100)]
ovsdb: Switch ovsdb log fsync to data only.
We do not check metadata - mtime, atime, anywhere, so we
do not need to update it every time we sync the log.
if the system supports it, the log update should be
data only
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: William Tu <u9012063@gmail.com>
William Tu [Tue, 14 Apr 2020 15:17:04 +0000 (08:17 -0700)]
fatal-signal: Remove snprintf.
Function snprintf is not async-signal-safe. Replace it with
our own implementation. Example ovs-vswitchd.log output:
2020-03-25T01:08:19.673Z|00050|memory|INFO|handlers:2 ports:3
SIGSEGV detected, backtrace:
0x4872d9 <fatal_signal_handler+0x49>
0x7f4e2ab974b0 <killpg+0x40>
0x7f4e2ac5d74d <__poll+0x2d>
0x531098 <time_poll+0x108>
0x51aefc <poll_block+0x8c>
0x445ca9 <udpif_revalidator+0x289>
0x5056fd <ovsthread_wrapper+0x7d>
0x7f4e2b65f6ba <start_thread+0xca>
0x7f4e2ac6941d <clone+0x6d>
0x0 <+0x0>
Tested-at: https://travis-ci.org/github/williamtu/ovs-travis/builds/674901331 Tested-by: Yifeng Sun <pkusunyifeng@gmail.com> Reviewed-by: Yifeng Sun <pkusunyifeng@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
William Tu [Thu, 16 Apr 2020 19:54:53 +0000 (12:54 -0700)]
conntrack: Add coverage count for l4csum error.
Add a coverage counter when userspace conntrack receives a packet
with invalid l4 checksum. When using veth for testing, users
often forget to turn off the tx offload on the other side of the
namespace, causing l4 checksum not calculated in packet header,
and at conntrack, return invalid conntrack state.
Suggested-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Yi-Hung Wei <yihung.wei@gmail.com>
Greg Rose [Tue, 14 Apr 2020 18:42:10 +0000 (11:42 -0700)]
compat: Fix broken partial backport of extack op parameter
A series of commits added support for the extended ack
parameter to the newlink, changelink and validate ops in
the rtnl_link_ops structure: a8b8a889e369d ("net: add netlink_ext_ack argument to rtnl_link_ops.validate") 7a3f4a185169b ("net: add netlink_ext_ack argument to rtnl_link_ops.newlink") ad744b223c521 ("net: add netlink_ext_ack argument to rtnl_link_ops.changelink")
These commits were all added at the same time and present since the
Linux kernel 4.13 release. In our compatiblity layer we have a
define HAVE_EXT_ACK_IN_RTNL_LINKOPS that indicates the presence of
the extended ack parameter for these three link operations.
At least one distro has only backported two of the three patches,
for newlink and changelink, while not backporting patch a8b8a889e369d
for the validate op. Our compatibility layer code in acinclude.m4
is able to find the presence of the extack within the rtnl_link_ops
structure so it defines HAVE_EXT_ACK_IN_RTNL_LINKOPS but since the
validate link op does not have the extack parameter the compilation
fails on recent kernels for that particular distro. Other kernel
distributions based upon this distro will presumably also encounter
the compile errors.
Introduce a new function in acinclude.m4 that will find function
op definitions and then search for the required parameter. Then
use this function to define HAVE_RTNLOP_VALIDATE_WITH_EXTACK so
that we can detect and enable correct compilation on kernels
which have not backported the entire set of patches. This function
is generic to any function op - it need not be in a structure.
In places where HAVE_EXT_ACK_IN_RTNL_LINKOPS wraps validate functions
replace it with the new HAVE_RTNLOP_VALIDATE_WITH_EXTACK define.
Passes a kernel check-kmod test on several systems, including
sles12 sp4 4.12.14-95.48-default kernel, without any regressions.
VMWare-BZ: #2544032 Signed-off-by: Greg Rose <gvrose8192@gmail.com> Reviewed-by: Yifeng Sun <pkusunyifeng@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
Yifeng Sun [Thu, 9 Apr 2020 18:37:39 +0000 (11:37 -0700)]
system-traffic: Check frozen state handling with TLV map change
This patch enhances a system traffic test to prevent regression on
the tunnel metadata table (tun_table) handling with frozen state.
Without a proper fix this test can crash ovs-vswitchd due to a
use-after-free bug on tun_table.
These are the timed sequence of how this bug is triggered:
- Adds an OpenFlow rule in OVS that matches Geneve tunnel metadata that
contains a controller action.
- When the first packet matches the aforementioned OpenFlow rule,
during the miss upcall, OVS stores a pointer to the tun_table (that
decodes the Geneve tunnel metadata) in a frozen state and pushes down
a datapath flow into kernel datapath.
- Issues a add-tlv-map command to reprogram the tun_table on OVS.
OVS frees the old tun_table and create a new tun_table.
- A subsequent packet hits the kernel datapath flow again. Since
there is a controller action associated with that flow, it triggers
slow path controller upcall.
- In the slow path controller upcall, OVS derives the tun_table
from the frozen state, which points to the old tun_table that is
already being freed at this time point.
- In order to access the tunnel metadata, OVS uses the invalid
pointer that points to the old tun_table and triggers the core dump.
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: Yifeng Sun <pkusunyifeng@gmail.com> Co-authored-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
Yifeng Sun [Thu, 9 Apr 2020 18:37:38 +0000 (11:37 -0700)]
tun_metadata: Fix coredump caused by use-after-free bug
Tun_metadata can be referened by flow and frozen_state at the same
time. When ovs-vswitchd handles TLV table mod message, the involved
tun_metadata gets freed. The call trace to free tun_metadata is
shown as below:
Unfortunately, this tun_metadata can be still used by some frozen_state,
and later on when frozen_state tries to access its tun_metadata table,
ovs-vswitchd crashes. The call trace to access tun_metadata from
frozen_state is shown as below:
It is unsafe for frozen_state to reference tun_table because tun_table
is protected by RCU while the lifecycle of frozen_state can span several
RCU quiesce states. Current code violates OVS's RCU protection mechanism.
This patch fixes it by simply stopping frozen_state from referencing
tun_table. If frozen_state needs tun_table, the latest valid tun_table
can be found through ofproto_get_tun_tab() efficiently.
A previous commit seems fixing the samiliar issue: 254878c18874f6 (ofproto-dpif-xlate: Fix segmentation fault caused by tun_table)
VMware-BZ: #2526222 Signed-off-by: Yifeng Sun <pkusunyifeng@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
Timothy Redaelli [Thu, 19 Mar 2020 19:05:39 +0000 (20:05 +0100)]
bugtool: Fix for Python3.
Currently ovs-bugtool tool doesn't start on Python 3.
This commit fixes ovs-bugtool to make it works on Python 3.
Replaced StringIO.StringIO with io.BytesIO since the script is
processing binary data.
Reported-at: https://bugzilla.redhat.com/1809241 Reported-by: Flavio Leitner <fbl@sysclose.org> Signed-off-by: Timothy Redaelli <tredaelli@redhat.com> Co-authored-by: William Tu <u9012063@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
dpif-netdev: includes microsecond delta in meter bucket calculation
When dp-netdev meter rate is higher than 200Mbps, observe
more than 10% bias from configured rate value with UDP traffic.
In dp-netdev meter, millisecond delta between now and last used
is taken into bucket size calcualtion, while sub-millisecond part
is truncated.
If traffic rate is pretty high, time delta can be few milliseconds,
its ratio to truncated part is less than 10:1, the loss of bucket
size caused by truncated can be observed obviously by commited
traffic rate.
In this patch, microsend delta part is included in calculation
of meter bucket to make it more precise.
Signed-off-by: Jiang Lidong <jianglidong3@jd.com> Signed-off-by: William Tu <u9012063@gmail.com>
Lance Yang [Mon, 30 Mar 2020 12:54:03 +0000 (20:54 +0800)]
Travis: Enable clang compiler and unit test for arm CI
Enable testsuite and clang compiler for arm CI. In order not to increase
the CI jobs, selectively enable them in the existing jobs instead of
adding extra jobs.
Malvika Gupta [Mon, 30 Mar 2020 12:54:02 +0000 (20:54 +0800)]
tests/testsuite: Skip failing UT cases on aarch64
The following test cases are failing inconsistently on aarch64 platforms and
have been skipped until further investigation can be made on how to fix them:
Malvika Gupta [Mon, 30 Mar 2020 12:54:01 +0000 (20:54 +0800)]
tests/atlocal.in: Add check for aarch64 Architecture
This patch adds a condition to check if the CPU architecture is aarch64. If the
condition evaluates to true, $IS_ARM64 variable is set to 'yes'. For all other
architectures, this variable is set to 'no'.
Reviewed-by: Yanqin Wei <Yanqin.wei@arm.com> Signed-off-by: Malvika Gupta <malvika.gupta@arm.com> Signed-off-by: William Tu <u9012063@gmail.com>
William Tu [Mon, 6 Apr 2020 23:59:01 +0000 (16:59 -0700)]
ovs-vswitchd: Fix icmp reply timeout description.
Currently the userspace datapath implements conntrack ICMP reply state
as when ICMP packets have been seen on both directions. However, the
description is defined as timeout of the connection after an ICMP error
is replied in response to an ICMP packet.
Fixes: 61a5264d60d0c ("ovs-vswitchd: Add Datapath, CT_Zone, and CT_Zone_Policy tables.") Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Greg Rose <gvrose8192@gmail.com>
If the ovsdb-server reply to "monitor_cond_since" requests has
"found" == false then ovsdb_idl_db_parse_monitor_reply() calls
ovsdb_idl_db_clear() which iterates through all tables and
unconditionally sets table->cond_changed to false.
However, if the client had already set a new condition for some of the
tables, this new condition request will never be sent to ovsdb-server
until the condition is reset to a different value. This is due to the
check in ovsdb_idl_db_set_condition().
One way to replicate the issue is described in the bugzilla reporting
the bug, when ovn-controller is configured to use "ovn-monitor-all":
https://bugzilla.redhat.com/show_bug.cgi?id=1808125#c6
Commit 5351980b047f tried to optimize sending redundant conditional
monitoring updates but the chances that this scenario happens with the
latest code is quite low since commit 403a6a0cb003 ("ovsdb-idl: Fast
resync from server when connection reset.") changed the behavior of
ovsdb_idl_db_parse_monitor_reply() to avoid calling ovsdb_idl_db_clear()
in most cases.
Reported-by: Dan Williams <dcbw@redhat.com>
Reported-at: https://bugzilla.redhat.com/1808125 CC: Andy Zhou <azhou@ovn.org> Fixes: 5351980b047f ("ovsdb-idl: Avoid sending redundant conditional monitoring updates") Acked-by: Han Zhou <hzhou@ovn.org> Acked-by: Ilya Maximets <i.maximets@ovn.org> Signed-off-by: Dumitru Ceara <dceara@redhat.com> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
William Tu [Mon, 25 Nov 2019 19:19:23 +0000 (11:19 -0800)]
userspace: Add GTP-U support.
GTP, GPRS Tunneling Protocol, is a group of IP-based communications
protocols used to carry general packet radio service (GPRS) within
GSM, UMTS and LTE networks. GTP protocol has two parts: Signalling
(GTP-Control, GTP-C) and User data (GTP-User, GTP-U). GTP-C is used
for setting up GTP-U protocol, which is an IP-in-UDP tunneling
protocol. Usually GTP is used in connecting between base station for
radio, Serving Gateway (S-GW), and PDN Gateway (P-GW).
This patch implements GTP-U protocol for userspace datapath,
supporting only required header fields and G-PDU message type.
See spec in:
https://tools.ietf.org/html/draft-hmm-dmm-5g-uplane-analysis-00
Tested-at: https://travis-ci.org/github/williamtu/ovs-travis/builds/666518784 Signed-off-by: Feng Yang <yangfengee04@gmail.com> Co-authored-by: Feng Yang <yangfengee04@gmail.com> Signed-off-by: Yi Yang <yangyi01@inspur.com> Co-authored-by: Yi Yang <yangyi01@inspur.com> Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Ben Pfaff <blp@ovn.org>
Ilya Maximets [Tue, 24 Mar 2020 23:50:45 +0000 (00:50 +0100)]
dpif-netdev: Force port reconfiguration to change dynamic_txqs.
In case number of polling threads goes from exact number of Tx queues
in port to higher value while set_tx_multiq() not implemented or not
requesting reconfiguration, port will not be reconfigured and datapath
will continue using static Tx queue ids leading to crash.
Ex.:
Assuming that port p0 supports up to 4 Tx queues and doesn't support
set_tx_multiq() method. For example, netdev-afxdp could be the case,
because it could have multiple Tx queues, but doesn't have
set_tx_multiq() implementation because number of Tx queues always
equals to number of Rx queues.
1. Configuring pmd-cpu-mask to have 3 pmd threads.
2. Adding port p0 to OVS.
At this point wanted_txqs = 4 (3 for pmd threads + 1 for non-pmd).
Port reconfigured to have 4 Tx queues successfully.
dynamic_txqs = (4 < 4) = false;
3. Configuring pmd-cpu-mask to have 10 pmd threads.
At this point wanted_txqs = 11 (10 for pmd threads + 1 for non-pmd).
Since set_tx_multiq() is not implemented, netdev doesn't request
reconfiguration and 'dynamic_txqs' remains in 'false' state.
4. Since 'dynamic_txqs == false', dpif-netdev uses static Tx queue
ids that are in range [0, 10] while device only supports 4 leading
to unwanted behavior and crashes.
Fix that by marking for reconfiguration all the ports that will likely
change their 'dynamic_txqs' value.
It looks like the issue could be reproduced only with afxdp ports,
because all other non-dpdk ports ignores Tx queue ids and dpdk ports
requests for reconfiguration on set_tx_multiq().
Reported-by: William Tu <u9012063@gmail.com>
Reported-at: https://mail.openvswitch.org/pipermail/ovs-dev/2020-March/368364.html Fixes: e32971b8ddb4 ("dpif-netdev: Centralized threads and queues handling code.") Acked-by: Kevin Traynor <ktraynor@redhat.com> Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Signed-off-by: William Tu <u9012063@gmail.com>
Dmytro Linkin [Thu, 27 Feb 2020 15:22:32 +0000 (17:22 +0200)]
netdev-offload-tc: Flush rules on ingress block when init tc flow api
OVS can fail to attach ingress block on iface when init tc flow api,
if block already exist with rules on it and is shared with other iface.
Fix by flush all existing rules on the ingress block prior to deleting
it.
Fixes: 093c9458fb02 ("tc: allow offloading of block ids") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Acked-by: Raed Salem <raeds@mellanox.com> Acked-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Simon Horman <simon.horman@netronome.com>
Lance Yang [Tue, 24 Mar 2020 07:00:37 +0000 (15:00 +0800)]
travis: Enable OvS Travis CI for arm
Enable part of travis jobs with gcc compiler for arm64 architecture
1. Add arm jobs into the matrix in .travis.yml configuration file
2. To enable OVS-DPDK jobs, set the build target according to
different CPU architectures
3. Temporarily disable sparse checker because of static code checking
failure on arm64
Considering the balance of the CI coverage and running time, some kernel
and DPDK jobs are removed from Arm CI.
Successful travis build jobs report:
https://travis-ci.org/github/yzyuestc/ovs/builds/666129448
Reviewed-by: Yanqin Wei <Yanqin.Wei@arm.com> Reviewed-by: Ruifeng Wang <Ruifeng.Wang@arm.com> Reviewed-by: JingZhao Ni <JingZhao.Ni@arm.com> Reviewed-by: Gavin Hu <Gavin.Hu@arm.com> Signed-off-by: Lance Yang <Lance.Yang@arm.com> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Greg Rose [Tue, 24 Mar 2020 15:42:02 +0000 (08:42 -0700)]
compat: Fix nf_ip_hook parameters for RHEL 8
A RHEL release version check was only checking for RHEL releases
greater than 7.0 so that ended up including a compat fixup that
is not needed for 8.0. Fix up the version check.
Signed-off-by: Greg Rose <gvrose8192@gmail.com> Acked-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
Dumitru Ceara [Thu, 19 Mar 2020 19:21:16 +0000 (20:21 +0100)]
conntrack: Reset ct_state when entering a new zone.
When a new conntrack zone is entered, the ct_state field is zeroed in
order to avoid using state information from different zones.
One such scenario is when a packet is double NATed. Assuming two zones
and 3 flows performing the following actions in order on the packet:
1. ct(zone=5,nat), recirc
2. ct(zone=1), recirc
3. ct(zone=1,nat)
If at step #1 the packet matches an existing NAT entry, it will get
translated and pkt->md.ct_state is set to CS_DST_NAT or CS_SRC_NAT.
At step #2 the new tuple might match an existing connection and
pkt->md.ct_zone is set to 1.
If at step #3 the packet matches an existing NAT entry in zone 1,
handle_nat() will be called to perform the translation but it will
return early because the packet's zone matches the conntrack zone and
the ct_state field still contains CS_DST_NAT or CS_SRC_NAT from the
translations in zone 5.
In order to reliably detect when a packet enters a new conntrack zone
we also need to make sure that the pkt->md.ct_zone is properly
initialized if pkt->md.ct_state is non-zero. This already happens for
most cases. The only exception is when matched conntrack connection is
of type CT_CONN_TYPE_UN_NAT and the master connection is missing. To
cover this path we now call write_ct_md() in that case too. Remove
setting the CS_TRACKED flag as in this case as it will be done by the
new call to write_ct_md().
William Tu [Mon, 23 Mar 2020 23:34:37 +0000 (16:34 -0700)]
lockfile: Fix OVS_REQUIRES macro.
Pass lock objects, not their addresses, to the annotation macros.
Fixes: f21fa45f3085 ("lockfile: Minor code cleanup.")
Tested-at: https://travis-ci.org/github/williamtu/ovs-travis/builds/666098338 Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Ben Pfaff <blp@ovn.org>
William Tu [Mon, 23 Mar 2020 14:44:48 +0000 (07:44 -0700)]
fatal-signal: Log backtrace when no monitor daemon.
Currently the backtrace logging is only available when monitor
daemon is running. This patch enables backtrace logging when
no monitor daemon exists. At signal handling context, it detects
whether monitor daemon exists. If not, write directly the backtrace
to the vlog fd. Note that using VLOG_* macro doesn't work due to
it's buffer I/O, so this patch directly issue write() syscall to
the file descriptor.
For some system we stop using monitor daemon and use systemd to
monitor ovs-vswitchd, thus need this patch. Example of
ovs-vswitchd.log (note that there is no timestamp printed):
2020-03-23T14:42:12.949Z|00049|memory|INFO|175332 kB peak resident
2020-03-23T14:42:12.949Z|00050|memory|INFO|handlers:2 ports:3 reva
SIGSEGV detected, backtrace:
0x0000000000486969 <fatal_signal_handler+0x49>
0x00007f7f5e57f4b0 <killpg+0x40>
0x000000000047daa8 <pmd_thread_main+0x238>
0x0000000000504edd <ovsthread_wrapper+0x7d>
0x00007f7f5f0476ba <start_thread+0xca>
0x00007f7f5e65141d <clone+0x6d>
0x0000000000000000 <+0x0>
Acked-by: Ben Pfaff <blp@ovn.org> Signed-off-by: William Tu <u9012063@gmail.com>
Terry Wilson [Fri, 20 Mar 2020 15:22:38 +0000 (15:22 +0000)]
Handle refTable values with setkey()
For columns like QoS.queues where we have a map containing refTable
values, assigning w/ __setattr__ e.g. qos.queues={1: $queue_row}
works, but using using qos.setkey('queues', 1, $queue_row) results
in an Exception. The opdat argument can essentially just be the
JSON representation of the map column instead of trying to build
it.
Signed-off-by: Terry Wilson <twilson@redhat.com> Signed-off-by: Ben Pfaff <blp@ovn.org>
Ben Pfaff [Fri, 20 Mar 2020 00:53:10 +0000 (17:53 -0700)]
ofproto-dpif-xlate: Fix recirculation when in_port is OFPP_CONTROLLER.
Recirculation usually requires finding the pre-recirculation input port.
Packets sent by the controller, with in_port of OFPP_CONTROLLER or
OFPP_NONE, do not have a real input port data structure, only a port
number. The code in xlate_lookup_ofproto_() mishandled this case,
failing to return the ofproto data structure. This commit fixes the
problem and adds a test to guard against regression.
Greg Rose [Wed, 11 Mar 2020 17:49:17 +0000 (10:49 -0700)]
Documentation: Add note about iproute2 requirements for check-kmod
On many systems the check-kmod and check-kernel test suites have
many failures due to the lack of feature support in the older
iproute2 utility packages shipped with those systems. Add a
note indicating that it might be necessary to update the iproute2
utility package in order to fix those errors.
Signed-off-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com>
Usman Ansari [Thu, 19 Mar 2020 21:47:17 +0000 (14:47 -0700)]
hmap: Fix Coverity false positive
Coverity reports a false positive below:
Incorrect expression, Assign_where_compare_meant: use of "="
where "==" may have been intended.
Fixed it by rewriting '(NODE = NULL)' as '((NODE = NULL), false)'.
"make check" passes for this change
Coverity reports over 500 errors resolved
Suggested-by: Ben Pfaff <blp@ovn.org> Signed-off-by: Usman Ansari <ua1422@gmail.com> Signed-off-by: Ben Pfaff <blp@ovn.org>
wenxu [Wed, 11 Mar 2020 05:39:34 +0000 (13:39 +0800)]
dpif-netlink: avoid netlink modify flow put op failed after tc modify flow put op failed.
The tc modify flow put always delete the original flow first and
then add the new flow. If the modfiy flow put operation failed,
the flow put operation will change from modify to create if success
to delete the original flow in tc (which will be always failed with
ENOENT, the flow is already be deleted before add the new flow in tc).
Finally, the modify flow put will failed to add in kernel datapath.
Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Simon Horman <simon.horman@netronome.com>
Ilya Maximets [Fri, 21 Feb 2020 14:41:50 +0000 (15:41 +0100)]
dpif-netdev: Enter quiescent state after each offloading operation.
If the offloading queue is big and filled continuously, offloading
thread may have no chance to quiesce blocking rcu callbacks and
other threads waiting for synchronization.
Fix that by entering momentary quiescent state after each operation
since we're not holding any rcu-protected memory here.
Fixes: 02bb2824e51d ("dpif-netdev: do hw flow offload in a thread") Reported-by: Eli Britstein <elibr@mellanox.com>
Reported-at: https://mail.openvswitch.org/pipermail/ovs-discuss/2020-February/049768.html Acked-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
projects / ovs.git / log