fbdev/core: Pass Linux device to pm_vt_switch_*() functions
Pass the Linux device to pm_vt_switch_*() instead of the virtual
fbdev device. Prepares fbdev for making struct fb_info.dev optional.
The type of device that is passed to the PM functions does not matter
much. It is only a token within the internal list of known devices.
The PM functions do not refer to any of the device's properties or its
type.
fbdev/tdfxfb: Set i2c adapter parent to hardware device
Use the 3dfx hardware device from the Linux device hierarchy as
parent device of the i2c adapter. Aligns the driver with the rest
of the codebase and prepares fbdev for making struct fb_info.dev
optional.
fbdev/smscufx: Detect registered fb_info from refcount
Detect registered instances of fb_info by reading the reference
counter from struct fb_info.read. Avoids looking at the dev field
and prepares fbdev for making struct fb_info.dev optional.
fbdev/sh7760fb: Use hardware device with dev_() output during probe
Call output helpers in the probe function with the hardware device.
The virtual fbdev device has not been initialized at that point. Also
prepares fbdev for making struct fb_info.dev optional.
fbdev/sh7760fb: Alloc DMA memory from hardware device
Pass the hardware device to the DMA helpers dma_alloc_coherent() and
dma_free_coherent(). The fbdev device that is currently being used is
a software device and does not provide DMA memory. Also update the
related dev_*() output statements similarly.
fbdev/rivafb: Use hardware device as backlight parent
Use the hardware device in struct fb_info.device as parent of the
backlight device. Aligns the driver with the rest of the codebase
and prepares fbdev for making struct fb_info.dev optional.
fbdev/radeonfb: Use hardware device as backlight parent
Use the hardware device in struct fb_info.device as parent of the
backlight device. Aligns the driver with the rest of the codebase
and prepares fbdev for making struct fb_info.dev optional.
fbdev/radeonfb: Reorder backlight and framebuffer cleanup
The driver's backlight code requires the framebuffer to be
registered. Therefore reorder the cleanup calls for both data
structures. The init calls are already in the correct order.
fbdev/nvidiafb: Use hardware device as backlight parent
Use the hardware device in struct fb_info.device as parent of the
backlight device. Aligns the driver with the rest of the codebase
and prepares fbdev for making struct fb_info.dev optional.
fbdev/metronomefb: Use hardware device for dev_err()
Replace the use of the fbdev software device, stored in struct
fb_info.dev, with the hardware device from struct fb_info.device
in load_waveform(). The device is only used for printing errors
with dev_err().
This change aligns load_waveform() with the rest of the driver and
prepares fbdev for making struct fb_info.dev optional.
fbdev/ep93xx-fb: Do not assign to struct fb_info.dev
Do not assing the Linux device to struct fb_info.dev. The call to
register_framebuffer() initializes the field to the fbdev device.
Drivers should not override its value.
Fixes a bug where the driver incorrectly decreases the hardware
device's reference counter and leaks the fbdev device.
fbdev/ep93xx-fb: Alloc DMA memory from hardware device
Pass the hardware device to the DMA helpers dma_alloc_wc(), dma_mmap_wc()
and dma_free_coherent(). The fbdev device that is currently being used is
a software device and does not provide DMA memory.
fbdev/broadsheetfb: Call device_remove_file() with hardware device
Call device_remove_file() with the same device that has been used
for device_create_file(), which is the hardware device stored in
struct fb_info.device. Prepares fbdev for making struct fb_info.dev
optional.
fbdev/aty128fb: Use hardware device as backlight parent
Use the hardware device in struct fb_info.device as parent of the
backlight device. Aligns the driver with the rest of the codebase
and prepares fbdev for making struct fb_info.dev optional.
fbdev/atyfb: Use hardware device as backlight parent
Use the hardware device in struct fb_info.device as parent of the
backlight device. Aligns the driver with the rest of the codebase
and prepares fbdev for making struct fb_info.dev optional.
backlight/lv5207lp: Rename struct lv5207lp_platform_data.fbdev to 'dev'
Rename struct lv5207lp_platform_data.fbdev to 'dev', as it stores a
pointer to the Linux platform device; not the fbdev device. Makes
the code easier to understand.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: linux-sh@vger.kernel.org Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-7-tzimmermann@suse.de
backlight/lv5207lp: Compare against struct fb_info.device
Struct lv5207lp_platform_data refers to a platform device within
the Linux device hierarchy. The test in lv5207lp_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Fixes: 82e5c40d88f9 ("backlight: Add Sanyo LV5207LP backlight driver") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: linux-sh@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.12+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-6-tzimmermann@suse.de
backlight/gpio_backlight: Rename field 'fbdev' to 'dev'
Rename the field 'fbdev' in struct gpio_backlight_platform_data and
struct gpio_backlight to 'dev', as they store pointers to the Linux
platform device; not the fbdev device. Makes the code easier to
understand.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: linux-sh@vger.kernel.org Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-5-tzimmermann@suse.de
backlight/gpio_backlight: Compare against struct fb_info.device
Struct gpio_backlight_platform_data refers to a platform device within
the Linux device hierarchy. The test in gpio_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 8b770e3c9824 ("backlight: Add GPIO-based backlight driver") Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: linux-sh@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.12+ Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-4-tzimmermann@suse.de
backlight/bd6107: Rename struct bd6107_platform_data.fbdev to 'dev'
Rename struct bd6107_platform_data.fbdev to 'dev', as it stores a
pointer to the Linux platform device; not the fbdev device. Makes
the code easier to understand.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-3-tzimmermann@suse.de
backlight/bd6107: Compare against struct fb_info.device
Struct bd6107_platform_data refers to a platform device within
the Linux device hierarchy. The test in bd6107_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Fixes: 67b43e590415 ("backlight: Add ROHM BD6107 backlight driver") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.12+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-2-tzimmermann@suse.de
Adrián Larumbe [Sun, 25 Jun 2023 14:17:16 +0000 (15:17 +0100)]
drm/bridge: dw-hdmi: truly enforce 420-only formats when drm mode demands it
The current output bus format selection logic is enforcing YUV420 even
when the drm mode allows for other bus formats as well.
Fix it by adding check for 420-only drm modes.
Adrián Larumbe [Sun, 25 Jun 2023 14:17:15 +0000 (15:17 +0100)]
drm/bridge: dw-hdmi: change YUV420 selection logic at clock setup
Right now clocking value selection code is prioritising RGB, YUV444 modes
over YUV420 for HDMI2 sinks. However, because of the bus format selection
procedure in dw-hdmi, for HDMI2 sinks YUV420 is the format that will always
be picked during the drm bridge chain check stage.
Later on dw_hdmi_setup will configure a colour space based on the bus
format that doesn't match the pixel value we had calculated as described
above.
Fix it by bringing back dw-hdmi bus format check when picking the right
pixel clock.
drm: Clear fd/handle callbacks in struct drm_driver
Clear all assignments of struct drm_driver's fd/handle callbacks to
drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These
functions are called by default. Add a TODO item to convert vmwgfx
to the defaults as well.
v2:
* remove TODO item (Zack)
* also update amdgpu's amdgpu_partition_driver
Call drm_gem_prime_handle_to_fd() and drm_gem_prime_fd_to_handle() by
default if no PRIME import/export helpers have been set. Both functions
are the default for almost all drivers.
DRM drivers implement struct drm_driver.gem_prime_import_sg_table
to import dma-buf objects from other drivers. Having the function
drm_gem_prime_fd_to_handle() functions set by default allows each
driver to import dma-buf objects to itself, even without support for
other drivers.
For drm_gem_prime_handle_to_fd() it is similar: using it by default
allows each driver to export to itself, even without support for other
drivers.
This functionality enables userspace to share per-driver buffers
across process boundaries via PRIME (e.g., wlroots requires this
functionality). The patch generalizes a pattern that has previously
been implemented by GEM VRAM helpers [1] to work with any driver.
For example, gma500 can now run the wlroots-based sway compositor.
v2:
* clean up docs and TODO comments (Simon, Zack)
* clean up style in drm_getcap()
Liu Ying [Mon, 12 Jun 2023 09:23:59 +0000 (17:23 +0800)]
drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable()
When disabling overlay plane in mxsfb_plane_overlay_atomic_update(),
overlay plane's framebuffer pointer is NULL. So, dereferencing it would
cause a kernel Oops(NULL pointer dereferencing). Fix the issue by
disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead.
Fixes: cb285a5348e7 ("drm: mxsfb: Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr()") Cc: stable@vger.kernel.org # 5.19+ Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230612092359.784115-1-victor.liu@nxp.com
All convertions from the ARGB16161616 format follow the same structure.
Instead of repeting the same structure for each supported format, create
a function to encapsulate the common logic and isolate the pixel
conversion functions in a callback function.
Maíra Canal [Mon, 15 May 2023 13:52:04 +0000 (10:52 -0300)]
drm/vkms: Enable ARGB8888 support for writeback
The VKMS already has a function to convert ARGB16161616 to ARGB8888, so
it is possible to use this function to provide the writeback support for
the ARGB8888 format. Therefore, add the ARGB8888 format to the writeback
format list.
Maíra Canal [Mon, 15 May 2023 13:52:03 +0000 (10:52 -0300)]
drm/vkms: Reduce critical section
The spinlock composer_lock protects the variables crc_pending,
wb_pending, frame_start and frame_end, which are variables that are used
by the composer worker. There is no need to protect the wb_frame_info
information with a spinlock. Therefore, reduce the critical section of
the lock by removing the assignments to the wb_frame_info from the
critical section.
Douglas Anderson [Fri, 16 Jun 2023 23:55:17 +0000 (16:55 -0700)]
drm/bridge: ps8640: Drop the ability of ps8640 to fetch the EDID
In order to read the EDID from an eDP panel, you not only need to
power on the bridge chip itself but also the panel. In the ps8640
driver, this was made to work by having the bridge chip manually power
the panel on by calling pre_enable() on everything connectorward on
the bridge chain. This worked OK, but...
...when trying to do the same thing on ti-sn65dsi86, feedback was that
this wasn't a great idea. As a result, we designed the "DP AUX"
bus. With the design we ended up with the panel driver itself was in
charge of reading the EDID. The panel driver could power itself on and
the bridge chip was able to power itself on because it implemented the
DP AUX bus.
Despite the fact that we came up with a new scheme, implemented in on
ti-sn65dsi86, and even implemented it on parade-ps8640, we still kept
the old code around. This was because the new scheme required a DT
change. Previously the panel was a simple "platform_device" and in DT
at the top level. With the new design the panel needs to be listed in
DT under the DP controller node. The old code allowed us to properly
fetch EDIDs with ps8640 with the old DTs.
Unfortunately, the old code stopped working as of commit 102e80d1fa2c
("drm/bridge: ps8640: Use atomic variants of drm_bridge_funcs"). There
are cases at bootup where connector->state->state is NULL and the
kernel crashed at:
* drm_atomic_bridge_chain_pre_enable
* drm_atomic_get_old_bridge_state
* drm_atomic_get_old_private_obj_state
The crash went away at commit 4fb912e5e190 ("drm/bridge: Introduce
pre_enable_prev_first to alter bridge init order") which added a NULL
check. However, even though we were no longer crashing the end result
was that we weren't actually powering the panel on when we thought we
were. Things could end up working (despite warning splats) if
userspace was persistent and tried to get the mode again, but it
wasn't great.
A bit of digging was done to see if there was an easy fix but there
was nothing obvious. Instead, the only device using ps8640 the "old"
way had its DT updated so that the panel was no longer a simple
"platform_deice". See commit c2d94f72140a ("arm64: dts: mediatek:
mt8173-elm: Move display to ps8640 auxiliary bus") and commit 113b5cc06f44 ("arm64: dts: mediatek: mt8173-elm: remove panel model
number in DT").
Let's delete the old broken code so nobody gets tempted to copy it or
figure out how it works (since it doesn't).
NOTE: from a device tree "purist" point of view, we're supposed to
keep old device trees working and this patch is technically "against
policy". Reasons I'm still proposing it anyway:
1. Officially, old mt8173-elm device trees worked via the "little
white lie" approach. The DT would list an arbitrary/representative
panel that would be used for power sequencing. The mode information
in the panel driver would then be ignored / overridden by the EDID
reading code in ps8640. I don't feel too terrible breaking DTs that
contained the wrong "compatible" string to begin with. NOTE that
any old device trees that _didn't_ lie about their compatible will
still work because the mode information will come from the
hardcoded panels in panel-edp.
2. The only users of the old code were Chromebooks and Chromebooks
don't bake their DTs into the BIOS (they are bundled with the
kernel). Thus we don't need to worry about breaking someone using
an old DT with a new kernel.
3. The old code was broken anyway. If someone wants to fix the old
code instead of deleting it then they have my blessing, but without
a proper fix the old code isn't useful.
Rename drm_sysfs_connector_status_event() to
drm_sysfs_connector_property_event(). Indeed, "status" is a bit
vague: it can easily be confused with the connected/disconnected
status of the connector. This function has nothing to do with
connected/disconnected: it merely sends a notification that a
connector's property has changed (e.g. HDCP, privacy screen, etc).
Simon Ser [Fri, 28 Apr 2023 10:01:24 +0000 (10:01 +0000)]
drm: fix code style for embedded structs in hdr_metadata_infoframe
Only the stuff inside the brackets should be indented.
Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sebastian Wick <sebastian.wick@redhat.com> Cc: Joshua Ashton <joshua@froggi.es> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428100115.9802-1-contact@emersion.fr
would result in failures to re-enable the panel. Mode set callback is
called only once during boot in this scenario, while calls to
enable/disable callbacks are balanced afterwards. The driver doesn't
work unless userspace calls modeset before enabling the CRTC/connector.
This patch moves enabling of the DSI host from mode_set into pre_enable
callback, and removes some old hacks where this bridge driver is
directly calling into other bridge driver's callbacks.
pre_enable_prev_first flag is set on the panel's bridge so that panel
drivers will get their prepare function called between DSI host's
pre_enable and enable callbacks, so that they get a chance to
perform panel setup while DSI host is already enabled in command
mode. Otherwise panel's prepare would be called before DSI host
is enabled, and any DSI communication used in prepare callback
would fail.
With all these changes, the enable/disable sequence is now well
balanced, and host's and panel's callbacks are called in proper order
documented in the drm_panel API documentation without needing the old
hacks. (Mainly that panel->prepare is called when DSI host is ready to
allow the panel driver to send DSI commands and vice versa during
disable.)
Tested on Pinephone Pro. Trace of the callbacks follows.
Uwe Kleine-König [Sun, 11 Jun 2023 20:27:40 +0000 (22:27 +0200)]
drm/i2c: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Marek Vasut [Thu, 15 Jun 2023 20:19:02 +0000 (22:19 +0200)]
drm/bridge: tc358762: Handle HS/VS polarity
Add support for handling the HS/VS sync signals polarity in the bridge
driver, otherwise e.g. DSIM bridge feeds the TC358762 inverted polarity
sync signals and the image is shifted to the left, up, and wobbly.
Marek Vasut [Thu, 15 Jun 2023 20:19:01 +0000 (22:19 +0200)]
drm/bridge: tc358762: Guess the meaning of LCDCTRL bits
The register content and behavior is very similar to TC358764 VP_CTRL.
All the bits except for unknown bit 6 also seem to match, even though
the datasheet is just not available. Add a comment and reuse the bit
definitions.
Marek Vasut [Thu, 15 Jun 2023 20:19:00 +0000 (22:19 +0200)]
drm/bridge: tc358762: Instruct DSI host to generate HSE packets
This bridge seems to need the HSE packet, otherwise the image is
shifted up and corrupted at the bottom. This makes the bridge
work with Samsung DSIM on i.MX8MM and i.MX8MP.
Marek Vasut [Thu, 15 Jun 2023 20:18:58 +0000 (22:18 +0200)]
drm/bridge: tc358762: Split register programming from pre-enable to enable
Move the register programming part, which actually enables the bridge and
makes it push data out of its DPI side, into the enable callback. The DSI
host like DSIM may not be able to transmit commands in pre_enable, moving
the register programming into enable assures it can transmit commands.
Dmitry Osipenko [Mon, 29 May 2023 22:39:35 +0000 (01:39 +0300)]
drm/shmem-helper: Switch to reservation lock
Replace all drm-shmem locks with a GEM reservation lock. This makes locks
consistent with dma-buf locking convention where importers are responsible
for holding reservation lock for all operations performed over dma-bufs,
preventing deadlock between dma-buf importers and exporters.
Dmitry Osipenko [Mon, 29 May 2023 22:39:34 +0000 (01:39 +0300)]
dma-buf: Change locking policy for mmap()
Change locking policy of mmap() callback, making exporters responsible
for handling dma-buf reservation locking. Previous locking policy stated
that dma-buf is locked for both importers and exporters by the dma-buf
core, which caused a deadlock problem for DRM drivers in a case of
self-imported dma-bufs which required to take the lock from the DRM
exporter side.
Dmitry Osipenko [Mon, 29 May 2023 22:39:33 +0000 (01:39 +0300)]
drm: Don't assert held reservation lock for dma-buf mmapping
Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.
We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem is
solved by moving the lock down to exporters. This patch prepares DRM
drivers for the locking policy update.
Dmitry Osipenko [Mon, 29 May 2023 22:39:32 +0000 (01:39 +0300)]
udmabuf: Don't assert held reservation lock for dma-buf mmapping
Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.
We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem is
solved by moving the lock down to exporters. This patch prepares udmabuf
for the locking policy update.
Dmitry Osipenko [Mon, 29 May 2023 22:39:31 +0000 (01:39 +0300)]
dma-buf/heaps: Don't assert held reservation lock for dma-buf mmapping
Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.
We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem
solved by moving the lock down to exporters. This patch prepares dma-buf
heaps for the locking policy update.
Dmitry Osipenko [Mon, 29 May 2023 22:39:30 +0000 (01:39 +0300)]
media: videobuf2: Don't assert held reservation lock for dma-buf mmapping
Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.
We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem is
solved by moving the lock down to exporters. This patch prepares videobuf2
for the locking policy update.
Maíra Canal [Mon, 8 May 2023 22:00:30 +0000 (19:00 -0300)]
drm/vkms: Fix all kernel-doc warnings of the vkms_composer file
Fix the following warnings:
drivers/gpu/drm/vkms/vkms_composer.c:42: warning: Function parameter or member 'frame_info' not described in 'pre_mul_alpha_blend'
drivers/gpu/drm/vkms/vkms_composer.c:42: warning: Excess function parameter 'src_frame_info' description in 'pre_mul_alpha_blend'
drivers/gpu/drm/vkms/vkms_composer.c:93: warning: Cannot understand * @wb_frame_info: The writeback frame buffer metadata
on line 93 - I thought it was a doc line
by correcting variable names and adding function name.
Maíra Canal [Mon, 8 May 2023 22:00:29 +0000 (19:00 -0300)]
drm/vkms: Add kernel-doc to the function vkms_compose_row()
The function vkms_compose_row() was introduced in the code without any
documentation. In order to make the function more clear, add a
kernel-doc to it.
The callback struct drm_driver.gem_prime_mmap as been removed in
commit 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap").
Do not assign to it. The assigned function, drm_gem_prime_mmap(), is
now the default for the operation, so there is no change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230619141129.2002-1-tzimmermann@suse.de
Backmerging into drm-misc-next to get commit 2c1c7ba457d4
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap").
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
All drivers initialize this field with drm_gem_prime_mmap(). Call
the function directly and remove the field. Simplifies the code and
resolves a long-standing TODO item.
drm/msm: Initialize mmap offset after constructing the buffer object
Only the msm driver provides its own implementation of gem_prime_mmap
from struct drm_driver. All other drivers use the drm_gem_prime_mmap()
helper.
Initialize the mmap offset when constructing the buffer object in msm
and reduce the gem_prime_mmap code to the generic helper. Prepares
msm for the removal of struct drm_driver.gem_prime_mmap.
Aradhya Bhatia [Fri, 16 Jun 2023 15:09:00 +0000 (20:39 +0530)]
drm/tidss: Add support for AM625 DSS
Add support for the DSS controller on TI's AM625 SoC in the tidss
driver.
The AM625 DSS supports 2 video planes connecting to 2 video ports.
The first plane is a full plane supporting all the features, while the
2nd plane is a "lite" plane without scaling support.
The first video port in AM625 DSS internally provides DPI output to 2
OLDI transmitters. Each OLDI TX outputs 4 differential lanes of video
output and 1 of clock output.
This patch does not automatically enable the OLDI features of AM625 yet.
That support for OLDI will be added subsequently.
The second video port outputs DPI data directly out of the SoC. It has
24 data lines and can support a maximum of RGB888 output bus format.
The DSS controller on TI's AM625 SoC is an update from that on TI's
AM65X SoC. The former has an additional OLDI TX on its first video port
that helps output cloned video or WUXGA (1920x1200@60fps) resolution
video output over a dual-link mode to reduce the required OLDI clock
output.
The second video port is same from AM65x DSS and it outputs DPI video
data. It can support 2K resolutions @ 60fps, independently.
Add the new controller's compatible and update descriptions.
DPU:
+ Enable missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
+ Enabled writeback on sc7280
+ Implemented tearcheck support to support vsync on SM150 and
newer platforms
+ Native HDMI output support
+ Dropped unused features: regdma, GC, IGC
+ Fixed the DSC flush operations
+ Simplified QoS handling, removing obsolete and unused features
and merging SSPP and WB code paths
+ Reworked dpu_encoder initialisation path
+ Enabled DSPP support on sdm845
+ Disabled color-management if DSPP blocks are not available
+ Added support for DSC 1.2 blocks found on sm8350 and later
+ Added .fb_dirty to fix CMD panels
DSI:
+ Drop powerup quirks in favour of using pre_enable_prev_first for
downstream bridges
+ Fixed 14nm DSI PHY programming
+ Added support for DSI and 28nm DSI PHY on MSM8226 platform
+ Make use of DRM and MSM DSC helpers
MDP5:
+ Added support for display controller on MSM8226 platform
GPU:
+ A690 support
+ Don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA on devices with coherent SMMU
(like A690)
+ Move cmdstream dumping out of fence signaling path
+ Cleanups
+ Support for a6xx devices without GMU (aka "GMU wrapper"
+ a610 support
+ a619_holi support (a619 variant without GMU)
Konrad Dybcio [Thu, 15 Jun 2023 23:21:01 +0000 (01:21 +0200)]
drm/msm/a6xx: Add A610 speedbin support
A610 is implemented on at least three SoCs: SM6115 (bengal), SM6125
(trinket) and SM6225 (khaje). Trinket does not support speed binning
(only a single SKU exists) and we don't yet support khaje upstream.
Hence, add a fuse mapping table for bengal to allow for per-chip
frequency limiting.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542780/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:21:00 +0000 (01:21 +0200)]
drm/msm/a6xx: Add A619_holi speedbin support
A619_holi is implemented on at least two SoCs: SM4350 (holi) and SM6375
(blair). This is what seems to be a first occurrence of this happening,
but it's easy to overcome by guarding the SoC-specific fuse values with
of_machine_is_compatible(). Do just that to enable frequency limiting
on these SoCs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542772/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:20:59 +0000 (01:20 +0200)]
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
Before transitioning to using per-SoC and not per-Adreno speedbin
fuse values (need another patchset to land elsewhere), a good
improvement/stopgap solution is to use adreno_is_aXYZ macros in
place of explicit revision matching. Do so to allow differentiating
between A619 and A619_holi.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542777/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:20:58 +0000 (01:20 +0200)]
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
The GPU can only be one at a time. Turn a series of ifs into if +
elseifs to save some CPU cycles.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542770/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:20:56 +0000 (01:20 +0200)]
drm/msm/a6xx: Add A610 support
A610 is one of (if not the) lowest-tier SKUs in the A6XX family. It
features no GMU, as it's implemented solely on SoCs with SMD_RPM.
What's more interesting is that it does not feature a VDDGX line
either, being powered solely by VDDCX and has an unfortunate hardware
quirk that makes its reset line broken - after a couple of assert/
deassert cycles, it will hang for good and will not wake up again.
This GPU requires mesa changes for proper rendering, and lots of them
at that. The command streams are quite far away from any other A6XX
GPU and hence it needs special care. This patch was validated both
by running an (incomplete) downstream mesa with some hacks (frames
rendered correctly, though some instructions made the GPU hangcheck
which is expected - garbage in, garbage out) and by replaying RD
traces captured with the downstream KGSL driver - no crashes there,
ever.
Add support for this GPU on the kernel side, which comes down to
pretty simply adding A612 HWCG tables, altering a few values and
adding a special case for handling the reset line.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542779/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:20:55 +0000 (01:20 +0200)]
drm/msm/a6xx: Add support for A619_holi
A619_holi is a GMU-less variant of the already-supported A619 GPU.
It's present on at least SM4350 (holi) and SM6375 (blair). No mesa
changes are required. Add the required kernel-side support for it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542775/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:20:54 +0000 (01:20 +0200)]
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
A610 and A619_holi don't support the feature. Disable it to make the GPU stop
crashing after almost each and every submission - the received data on
the GPU end was simply incomplete in garbled, resulting in almost nothing
being executed properly. Extend the disablement to adreno_has_gmu_wrapper,
as none of the GMU wrapper Adrenos that don't support yet seem to feature it.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542774/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:20:53 +0000 (01:20 +0200)]
drm/msm/a6xx: Introduce GMU wrapper support
Some (particularly SMD_RPM, a.k.a non-RPMh) SoCs implement A6XX GPUs
but don't implement the associated GMUs. This is due to the fact that
the GMU directly pokes at RPMh. Sadly, this means we have to take care
of enabling & scaling power rails, clocks and bandwidth ourselves.
Reuse existing Adreno-common code and modify the deeply-GMU-infused
A6XX code to facilitate these GPUs. This involves if-ing out lots
of GMU callbacks and introducing a new type of GMU - GMU wrapper (it's
the actual name that Qualcomm uses in their downstream kernels).
This is essentially a register region which is convenient to model
as a device. We'll use it for managing the GDSCs. The register
layout matches the actual GMU_CX/GX regions on the "real GMU" devices
and lets us reuse quite a bit of gmu_read/write/rmw calls.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542766/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:20:52 +0000 (01:20 +0200)]
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
Since the introduction of A6xx support, we've been enabling the CX GMU
power counter 0 in a bit of a weird spot. Move it to hw_init so that
GMU wrapper GPUs can reuse the same code paths. As a bonus, this order
makes it easier to compare mainline and downstream register access traces.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542765/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:20:51 +0000 (01:20 +0200)]
drm/msm/a6xx: Extend and explain UBWC config
Rename lower_bit to hbb_lo and explain what it signifies.
Add explanations (wherever possible to other tunables).
Port setting min_access_length, ubwc_mode and hbb_hi from downstream.
Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542764/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:20:50 +0000 (01:20 +0200)]
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
Currently we're only deasserting REG_A6XX_RBBM_GBIF_HALT, but we also
need REG_A6XX_GBIF_HALT to be set to 0.
This is typically done automatically on successful GX collapse, but in
case that fails, we should take care of it.
Also, add a memory barrier to ensure it's gone through before jumping
to further initialization.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542760/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:20:49 +0000 (01:20 +0200)]
drm/msm/a6xx: Add a helper for software-resetting the GPU
Introduce a6xx_gpu_sw_reset() in preparation for adding GMU wrapper
GPUs and reuse it in a6xx_gmu_force_off().
This helper, contrary to the original usage in GMU code paths, adds
a readback+delay sequence to ensure that the reset is never deasserted
too quickly due to e.g. OoO execution going crazy.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542758/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Unify the indentation and explain the cryptic 0xF value.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542756/ Signed-off-by: Rob Clark <robdclark@chromium.org>
projects / mirror_ubuntu-kernels.git / log