So far only the reset bit it set, but the handler executing the reset
is not scheduled. Therefore nothing will happen until some other action
schedules the handler. Improve this by ensuring that the handler is
scheduled.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
If we have an error while processing the reloc roots we could leak roots
that were added to rc->reloc_roots before we hit the error. We could
have also not removed the reloc tree mapping from our rb_tree, so clean
up any remaining nodes in the reloc root rb_tree.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ use rbtree_postorder_for_each_entry_safe ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
We previously were checking if the root had a dead root before accessing
root->reloc_root in order to avoid a use-after-free type bug. However
this scenario happens after we've unset the reloc control, so we would
have been saved if we'd simply checked for fs_info->reloc_control. At
this point during relocation we no longer need to be creating new reloc
roots, so simply move this check above the reloc_root checks to avoid
any future races and confusion.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Reproducible with a clang asan build and then running perf test in
particular 'Parse event definition strings'.
Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20200314170356.62914-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
apic->lapic_timer.timer was initialized with HRTIMER_MODE_ABS_HARD but
started later with HRTIMER_MODE_ABS, which may cause the following warning
in PREEMPT_RT kernel.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Message-Id: <1584687967-332859-1-git-send-email-zhe.he@windriver.com> Reviewed-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
If the common register memory resource is not available the driver needs
to fail gracefully to disable PM. Instead of returning the error
directly store it in ret and use the already existing error path.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200310114709.1483860-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
../kernel/trace/trace.c:9335:33: warning: array comparison always
evaluates to true [-Wtautological-compare]
if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
^
1 warning generated.
These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning and
does not change the runtime result of the check (tested with some print
statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU).
If the opp table specifies opp-supported-hw as a property but the driver
has not set a supported hardware value the OPP subsystem will reject
all the table entries.
Set a "default" value that will match the default table entries but not
conflict with any possible real bin values. Also fix a small memory leak
and free the buffer allocated by nvmem_cell_read().
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
We should free resources in unlikely case of allocation failure.
Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
On P9 DD2.2 due to a CPU defect some TM instructions need to be emulated by
KVM. This is handled at first by the hardware raising a softpatch interrupt
when certain TM instructions that need KVM assistance are executed in the
guest. Althought some TM instructions per Power ISA are invalid forms they
can raise a softpatch interrupt too. For instance, 'tresume.' instruction
as defined in the ISA must have bit 31 set (1), but an instruction that
matches 'tresume.' PO and XO opcode fields but has bit 31 not set (0), like
0x7cfe9ddc, also raises a softpatch interrupt. Similarly for 'treclaim.'
and 'trechkpt.' instructions with bit 31 = 0, i.e. 0x7c00075c and
0x7c0007dc, respectively. Hence, if a code like the following is executed
in the guest it will raise a softpatch interrupt just like a 'tresume.'
when the TM facility is enabled ('tabort. 0' in the example is used only
to enable the TM facility):
int main() { asm("tabort. 0; .long 0x7cfe9ddc;"); }
Currently in such a case KVM throws a complete trace like:
and then treats the executed instruction as a 'nop'.
However the POWER9 User's Manual, in section "4.6.10 Book II Invalid
Forms", informs that for TM instructions bit 31 is in fact ignored, thus
for the TM-related invalid forms ignoring bit 31 and handling them like the
valid forms is an acceptable way to handle them. POWER8 behaves the same
way too.
This commit changes the handling of the cases here described by treating
the TM-related invalid forms that can generate a softpatch interrupt
just like their valid forms (w/ bit 31 = 1) instead of as a 'nop' and by
gently reporting any other unrecognized case to the host and treating it as
illegal instruction instead of throwing a trace and treating it as a 'nop'.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-By: Michael Neuling <mikey@neuling.org> Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Some versions of Intel TH have an issue that prevents the multi mode of
MSU from working correctly, resulting in no trace data and potentially
stuck MSU pipeline.
Disable multi mode on such devices.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200317062215.15598-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Do not free the timewait_info without also holding the
id_priv->lock. Simplify this entire flow by making the free unconditional
during cm_destroy_id() and removing the confusing special case error
unwind during creation of the timewait_info.
This also fixes a leak of the timewait if cm_destroy_id() is called in
IB_CM_ESTABLISHED with an XRC TGT QP. The state machine will be left in
ESTABLISHED while it needed to transition through IB_CM_TIMEWAIT to
release the timewait pointer.
Also fix a leak of the timewait_info if the caller mis-uses the API and
does ib_send_cm_reqs().
Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation") Link: https://lore.kernel.org/r/20200310092545.251365-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
In NFSv4, the lock stateids are tied to the lockowner, and the open stateid,
so that the action of closing the file also results in either an automatic
loss of the locks, or an error of the form NFS4ERR_LOCKS_HELD.
In practice this means we must not add new locks to the open stateid
after the close process has been invoked. In fact doing so, can result
in the following panic:
The RTC IRQ is requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.
To fix this issue, allocating the rtc_device struct before requesting
the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.
Both RTC IRQs are requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.
To fix this issue, allocating the rtc_device struct before requesting
the IRQs using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.
Synchronize with the results from the CRQs before continuing with
the initialization. This avoids trying to send TPM commands while
the rtce buffer has not been allocated, yet.
This patch fixes an existing race condition that may occurr if the
hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE
request sent during initialization and therefore the ibmvtpm->rtce_buf
has not been allocated at the time the first TPM command is sent.
Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: Nayna Jain <nayna@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
In xchk_dir_actor, we attempt to validate the directory hash structures
by performing a directory entry lookup by (hashed) name. If the lookup
returns ENOENT, that means that the hash information is corrupt. The
_process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
If we decide that a directory free block is corrupt, we must take care
not to leak a buffer pointer to the caller. After xfs_trans_brelse
returns, the buffer can be freed or reused, which means that we have to
set *bpp back to NULL.
Callers are supposed to notice the nonzero return value and not use the
buffer pointer, but we should code more defensively, even if all current
callers handle this situation correctly.
Fixes: de14c5f541e7 ("xfs: verify free block header fields") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
SiFive's UART has a software controller clock divider that produces the
final baud rate clock. Whenever the clock that drives the UART is
changed this divider must be updated accordingly, and given that these
two events are controlled by software they cannot be done atomically.
During the period between updating the UART's driving clock and internal
divider the UART will transmit a different baud rate than what the user
has configured, which will probably result in a corrupted transmission
stream.
The SiFive UART has a FIFO, but due to an issue with the programming
interface there is no way to directly determine when the UART has
finished transmitting. We're essentially restricted to dead reckoning
in order to figure that out: we can use the FIFO's TX busy register to
figure out when the last frame has begun transmission and just delay for
a long enough that the last frame is guaranteed to get out.
As far as the actual implementation goes: I've modified the existing
existing clock notifier function to drain both the FIFO and the shift
register in on PRE_RATE_CHANGE. As far as I know there is no hardware
flow control in this UART, so there's no good way to ask the other end
to stop transmission while we can't receive (inserting software flow
control messages seems like a bad idea here).
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Tested-by: Yash Shah <yash.shah@sifive.com> Link: https://lore.kernel.org/r/20200307042637.83728-1-palmer@dabbelt.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
The shifting of buf[3] by 24 bits to the left will be promoted to
a 32 bit signed int and then sign-extended to an unsigned long. In
the unlikely event that the the top bit of buf[3] is set then all
then all the upper bits end up as also being set because of
the sign-extension and this affect the ev->post_bit_error sum.
Fix this by using the temporary u32 variable bit_error to avoid
the sign-extension promotion. This also removes the need to do the
computation twice.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 267897a4708f ("[media] tda10071: implement DVBv5 statistics") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5,
the incoming L2CAP_ConfigReq should be handled during
OPEN state.
The section below shows the btmon trace when running
L2CAP/COS/CFD/BV-12-C before and after this change.
=== Before ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12 #22
L2CAP: Connection Request (0x02) ident 2 len 4
PSM: 1 (0x0001)
Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16 #23
L2CAP: Connection Response (0x03) ident 2 len 8
Destination CID: 64
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #24
L2CAP: Configure Request (0x04) ident 2 len 4
Destination CID: 65
Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5 #25
Num handles: 1
Handle: 256
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5 #26
Num handles: 1
Handle: 256
Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #27
L2CAP: Configure Request (0x04) ident 3 len 8
Destination CID: 64
Flags: 0x0000
Option: Unknown (0x10) [hint]
01 00 ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18 #28
L2CAP: Configure Response (0x05) ident 3 len 10
Source CID: 65
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5 #29
Num handles: 1
Handle: 256
Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14 #30
L2CAP: Configure Response (0x05) ident 2 len 6
Source CID: 64
Flags: 0x0000
Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20 #31
L2CAP: Configure Request (0x04) ident 3 len 12
Destination CID: 64
Flags: 0x0000
Option: Unknown (0x10) [hint]
01 00 91 02 11 11 ......
< ACL Data TX: Handle 256 flags 0x00 dlen 14 #32
L2CAP: Command Reject (0x01) ident 3 len 6
Reason: Invalid CID in request (0x0002)
Destination CID: 64
Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5 #33
Num handles: 1
Handle: 256
Count: 1
...
=== After ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12 #22
L2CAP: Connection Request (0x02) ident 2 len 4
PSM: 1 (0x0001)
Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16 #23
L2CAP: Connection Response (0x03) ident 2 len 8
Destination CID: 64
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #24
L2CAP: Configure Request (0x04) ident 2 len 4
Destination CID: 65
Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5 #25
Num handles: 1
Handle: 256
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5 #26
Num handles: 1
Handle: 256
Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #27
L2CAP: Configure Request (0x04) ident 3 len 8
Destination CID: 64
Flags: 0x0000
Option: Unknown (0x10) [hint]
01 00 ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18 #28
L2CAP: Configure Response (0x05) ident 3 len 10
Source CID: 65
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5 #29
Num handles: 1
Handle: 256
Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14 #30
L2CAP: Configure Response (0x05) ident 2 len 6
Source CID: 64
Flags: 0x0000
Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20 #31
L2CAP: Configure Request (0x04) ident 3 len 12
Destination CID: 64
Flags: 0x0000
Option: Unknown (0x10) [hint]
01 00 91 02 11 11 .....
< ACL Data TX: Handle 256 flags 0x00 dlen 18 #32
L2CAP: Configure Response (0x05) ident 3 len 10
Source CID: 65
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #33
L2CAP: Configure Request (0x04) ident 3 len 4
Destination CID: 65
Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5 #34
Num handles: 1
Handle: 256
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5 #35
Num handles: 1
Handle: 256
Count: 1
...
Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Fixes the occasional adapter panic when sg_reset is issued with -d, -t, -b
and -H flags. Removal of command type HBA_IU_TYPE_SCSI_TM_REQ in
aac_hba_send since iu_type, request_id and fib_flags are not populated.
Device and target reset handlers are made to send TMF commands only when
reset_state is 0.
Link: https://lore.kernel.org/r/1581553771-25796-1-git-send-email-Sagar.Biradar@microchip.com Reviewed-by: Sagar Biradar <Sagar.Biradar@microchip.com> Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com> Signed-off-by: Balsundar P <balsundar.p@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
For sdio chip, it need the memory which is kmalloc, if it is
vmalloc from ath10k_mem_value_read, then it have a memory error.
kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so
add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer
which is vmalloc from ath10k_mem_value_read.
This patch only effect sdio chip.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
When 'etm->instructions_sample_period' is less than
'tidq->period_instructions', the function cs_etm__sample() cannot handle
this case properly with its logic.
Let's see below flow as an example:
- If we set itrace option '--itrace=i4', then function cs_etm__sample()
has variables with initialized values:
So after handle these two packets, there have below issues:
The first issue is that cs_etm__instr_addr() returns the address within
the current trace sample of the instruction related to offset, so the
offset is supposed to be always unsigned value. But in fact, function
cs_etm__sample() might calculate a negative offset value (in handling
the second packet, the offset is -3) and pass to cs_etm__instr_addr()
with u64 type with a big positive integer.
The second issue is it only synthesizes 2 samples for sample period = 4.
In theory, every packet has 10 instructions so the two packets have
total 20 instructions, 20 instructions should generate 5 samples
(4 x 5 = 20). This is because cs_etm__sample() only calls once
cs_etm__synth_instruction_sample() to generate instruction sample per
range packet.
This patch fixes the logic in function cs_etm__sample(); the basic
idea for handling coming packet is:
- To synthesize the first instruction sample, it combines the left
instructions from the previous packet and the head of the new
packet; then generate continuous samples with sample period;
- At the tail of the new packet, if it has the rest instructions,
these instructions will be left for the sequential sample.
Suggested-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Mike Leach <mike.leach@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Walker <robert.walker@arm.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight ml <coresight@lists.linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200219021811.20067-4-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
If use option '--itrace=iNNN' with Arm CoreSight trace data, perf tool
fails inject instruction samples; the root cause is the packets are only
swapped for branch samples and last branches but not for instruction
samples, so the new coming packets cannot be properly handled for only
synthesizing instruction samples.
To fix this issue, this patch refactors the code with a new function
cs_etm__packet_swap() which is used to swap packets and adds the
condition for instruction samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Mike Leach <mike.leach@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Walker <robert.walker@arm.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight ml <coresight@lists.linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200219021811.20067-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Currently there are only 10 bytes to store the cpu-topology 'name'
information. Only 10 bytes copied into cluster/thread/core names.
If the cluster ID exceeds 2-digit number, it will result in the data
corruption, and ending up in a dead loop in the parsing routines. The
same applies to the thread names with more that 3-digit number.
This issue was found using the boundary tests under virtualised
environment like QEMU.
Let us increase the buffer to fix such potential issues.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Link: https://lore.kernel.org/r/1583294092-5929-1-git-send-email-prime.zeng@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
We need to check for errors when calling cpu_pm_enter() and
cpu_cluster_pm_enter(). And we need to bail out on errors as
otherwise we can enter a deeper idle state when not desired.
I'm not aware of the lack of error handling causing issues yet,
but we need this at least for blocking deeper idle states when
a GPIO instance has pending interrupts.
Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200304225433.37336-2-tony@atomide.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
mitigates race condition on BACO reset between GPU bootcode and driver reload
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
The warning happens on failed __copy_from_user_inatomic() which tries to
copy data into a CoW page.
This happens because of race between MADV_DONTNEED and CoW page fault:
CPU0 CPU1
handle_mm_fault()
do_wp_page()
wp_page_copy()
do_wp_page()
madvise(MADV_DONTNEED)
zap_page_range()
zap_pte_range()
ptep_get_and_clear_full()
<TLB flush>
__copy_from_user_inatomic()
sees empty PTE and fails
WARN_ON_ONCE(1)
clear_page()
The solution is to re-try __copy_from_user_inatomic() under PTL after
checking that PTE is matches the orig_pte.
The second copy attempt can still fail, like due to non-readable PTE, but
there's nothing reasonable we can do about, except clearing the CoW page.
Reported-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Jeff Moyer <jmoyer@redhat.com> Cc: <stable@vger.kernel.org> Cc: Justin He <Justin.He@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/20200218154151.13349-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
The memory for global pointer is never freed during normal program
execution, so let's do that in the main function exit as a good
programming practice.
A stray blank line is also removed.
Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: James Clark <james.clark@arm.com> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linuxarm@huawei.com Link: http://lore.kernel.org/lkml/1583406486-154841-2-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
KCSAN find inode->i_disksize could be accessed concurrently.
BUG: KCSAN: data-race in ext4_mark_iloc_dirty / ext4_write_end
write (marked) to 0xffff8b8932f40090 of 8 bytes by task 66792 on cpu 0:
ext4_write_end+0x53f/0x5b0
ext4_da_write_end+0x237/0x510
generic_perform_write+0x1c4/0x2a0
ext4_buffered_write_iter+0x13a/0x210
ext4_file_write_iter+0xe2/0x9b0
new_sync_write+0x29c/0x3a0
__vfs_write+0x92/0xa0
vfs_write+0xfc/0x2a0
ksys_write+0xe8/0x140
__x64_sys_write+0x4c/0x60
do_syscall_64+0x8a/0x2a0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
read to 0xffff8b8932f40090 of 8 bytes by task 14414 on cpu 1:
ext4_mark_iloc_dirty+0x716/0x1190
ext4_mark_inode_dirty+0xc9/0x360
ext4_convert_unwritten_extents+0x1bc/0x2a0
ext4_convert_unwritten_io_end_vec+0xc5/0x150
ext4_put_io_end+0x82/0x130
ext4_writepages+0xae7/0x16f0
do_writepages+0x64/0x120
__writeback_single_inode+0x7d/0x650
writeback_sb_inodes+0x3a4/0x860
__writeback_inodes_wb+0xc4/0x150
wb_writeback+0x43f/0x510
wb_workfn+0x3b2/0x8a0
process_one_work+0x39b/0x7e0
worker_thread+0x88/0x650
kthread+0x1d4/0x1f0
ret_from_fork+0x35/0x40
The plain read is outside of inode->i_data_sem critical section
which results in a data race. Fix it by adding READ_ONCE().
Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Link: https://lore.kernel.org/r/1582556566-3909-1-git-send-email-hqjagain@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
[why]
When combining two or more pipes in DSC mode, there will always be more
than 1 slice per line. In this case, as per DSC rules, the sink device
is expecting that the ICH is reset at the end of each slice line (i.e.
ICH_RESET_AT_END_OF_LINE must be configured based on the number of
slices at the output of ODM). It is recommended that software set
ICH_RESET_AT_END_OF_LINE = 0xF for each DSC in the ODM combine. However
the current code only set ICH_RESET_AT_END_OF_LINE = 0xF when number of
slice per DSC engine is greater than 1 instead of number of slice per
output after ODM combine.
[how]
Add is_odm in dsc config. Set ICH_RESET_AT_END_OF_LINE = 0xF if either
is_odm or number of slice per DSC engine is greater than 1.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
The last jump to free_exit in mm_iommu_do_alloc() happens after page
pointers in struct mm_iommu_table_group_mem_t were already converted to
physical addresses. Thus calling put_page() on these physical addresses
will likely crash.
This moves the loop which calculates the pageshift and converts page
struct pointers to physical addresses later after the point when
we cannot fail; thus eliminating the need to convert pointers back.
Fixes: eb9d7a62c386 ("powerpc/mm_iommu: Fix potential deadlock") Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191223060351.26359-1-aik@ozlabs.ru Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
While unlikely the divisor in scale64_check_overflow() could be >= 32bit in
scale64_check_overflow(). do_div() truncates the divisor to 32bit at least
on 32bit platforms.
Use div64_u64() instead to avoid the truncation to 32-bit.
[ tglx: Massaged changelog ]
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200120100523.45656-1-wenyang@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Some controllers have been observed to send zero'd events under some
conditions. This change guards against this condition as well as adding
a trace to facilitate diagnosability of this condition.
Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Josef reported that his old-and-good Plextor ConvertX M402U video
converter spews lots of WARNINGs on the recent kernels, and it turned
out that the device uses a bulk endpoint for interrupt handling just
like 2250 board.
For fixing it, generalize the check with the proper verification of
the endpoint instead of hard-coded board type check.
Fixes: 7e5219d18e93 ("[media] go7007: Fix 2250 urb type") Reported-and-tested-by: Josef Möllers <josef.moellers@suse.com> BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1162583 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206427 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
In tx_wait_done the ipc payload is copied before the DSP transaction
error code is checked. This might lead to corrupted data in kernel side
even though the error would be handled later. It is also pointless to
copy the data in case of error. So change the order of error check and
copy.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com> Link: https://lore.kernel.org/r/20200228231850.9226-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Some released ACPI FW for Huawei boards describes incorrect the port IO
address range for child devices, in that it tells us the IO port max range
is 0x3fff for each child device, which is not correct. The address range
should be [e4:e8) or similar. With this incorrect upper range, the child
device IO port resources overlap.
As such, the kernel thinks that the LPC host serial device is a child of
the IPMI device:
They should both be siblings. Note that these are logical PIO addresses,
which have a direct mapping from the FW IO port ranges.
This shows up as a real issue when we enable CONFIG_KASAN and
CONFIG_DEBUG_TEST_DRIVER_REMOVE - we see use-after-free warnings in the
host removal path:
==================================================================
BUG: KASAN: use-after-free in release_resource+0x38/0xc8
Read of size 8 at addr ffff0026accdbc38 by task swapper/0/1
The issue here is that the kernel created an incorrect parent-child
resource dependency between two devices, and references the false parent
node when deleting the second child device, when it had been deleted
already.
Fix up the child device resources from FW to create proper IO port
resource relationships for broken FW.
Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Fields in "struct timer_rand_state" could be accessed concurrently.
Lockless plain reads and writes result in data races. Fix them by adding
pairs of READ|WRITE_ONCE(). The data races were reported by KCSAN,
BUG: KCSAN: data-race in add_timer_randomness / add_timer_randomness
write to 0xffff9f320a0a01d0 of 8 bytes by interrupt on cpu 22:
add_timer_randomness+0x100/0x190
add_timer_randomness at drivers/char/random.c:1152
add_disk_randomness+0x85/0x280
scsi_end_request+0x43a/0x4a0
scsi_io_completion+0xb7/0x7e0
scsi_finish_command+0x1ed/0x2a0
scsi_softirq_done+0x1c9/0x1d0
blk_done_softirq+0x181/0x1d0
__do_softirq+0xd9/0x57c
irq_exit+0xa2/0xc0
do_IRQ+0x8b/0x190
ret_from_intr+0x0/0x42
cpuidle_enter_state+0x15e/0x980
cpuidle_enter+0x69/0xc0
call_cpuidle+0x23/0x40
do_idle+0x248/0x280
cpu_startup_entry+0x1d/0x1f
start_secondary+0x1b2/0x230
secondary_startup_64+0xb6/0xc0
no locks held by swapper/22/0.
irq event stamp: 32871382
_raw_spin_unlock_irqrestore+0x53/0x60
_raw_spin_lock_irqsave+0x21/0x60
_local_bh_enable+0x21/0x30
irq_exit+0xa2/0xc0
read to 0xffff9f320a0a01d0 of 8 bytes by interrupt on cpu 2:
add_timer_randomness+0xe8/0x190
add_disk_randomness+0x85/0x280
scsi_end_request+0x43a/0x4a0
scsi_io_completion+0xb7/0x7e0
scsi_finish_command+0x1ed/0x2a0
scsi_softirq_done+0x1c9/0x1d0
blk_done_softirq+0x181/0x1d0
__do_softirq+0xd9/0x57c
irq_exit+0xa2/0xc0
do_IRQ+0x8b/0x190
ret_from_intr+0x0/0x42
cpuidle_enter_state+0x15e/0x980
cpuidle_enter+0x69/0xc0
call_cpuidle+0x23/0x40
do_idle+0x248/0x280
cpu_startup_entry+0x1d/0x1f
start_secondary+0x1b2/0x230
secondary_startup_64+0xb6/0xc0
no locks held by swapper/2/0.
irq event stamp: 37846304
_raw_spin_unlock_irqrestore+0x53/0x60
_raw_spin_lock_irqsave+0x21/0x60
_local_bh_enable+0x21/0x30
irq_exit+0xa2/0xc0
Reported by Kernel Concurrency Sanitizer on:
Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018
Link: https://lore.kernel.org/r/1582648024-13111-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
SDEI has private events that need registering and enabling on each CPU.
CPUs can come and go while we are trying to do this. SDEI tries to avoid
these problems by setting the reregister flag before the register call,
so any CPUs that come online register the event too. Sticking plaster
like this doesn't work, as if the register call fails, a CPU that
subsequently comes online will register the event before reregister
is cleared.
Take cpus_read_lock() around the register and enable calls. We don't
want surprise CPUs to do the wrong thing if they race with these calls
failing.
Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Looks like the iavf code actually experienced a race condition, when a
developer took code before the check for chain 0 was put to helper.
So use tc_cls_can_offload_and_chain0() helper instead of direct check and
move the check to _cb() so this is similar to i40e code.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
When the DSS initialises its output DPI and SDI ports, failures don't
clean up previous successfully initialised ports. This can lead to
resource leak or memory corruption. Fix it.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-22-laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Before removing the slave device, disable pm_runtime to prevent any
race condition with the resume being executed after the bus and slave
devices are removed.
Since this pm_runtime_disable() is handled in common routines,
implementations of Slave drivers do not need to call it in their
.remove() routine.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
It's incorrect to check the channel's "busy" state without taking a lock.
That shouldn't cause any real troubles, nevertheless it's always better
not to have any race conditions in the code.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200209163356.6439-5-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
If an element is freed via RCU then recursion into BPF instrumentation
functions is not a concern. The element is already detached from the map
and the RCU callback does not hold any locks on which a kprobe, perf event
or tracepoint attached BPF program could deadlock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200224145643.259118710@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Alex Shi reported the pkey macros above arch_set_user_pkey_access()
to be unused. They are unused, and even refer to a nonexistent
CONFIG option.
But, they might have served a good use, which was to ensure that
the code does not try to set values that would not fit in the
PKRU register. As it stands, a too-large 'pkey' value would
be likely to silently overflow the u32 new_pkru_bits.
Add a check to look for overflows. Also add a comment to remind
any future developer to closely examine the types used to store
pkey values if arch_max_pkey() ever changes.
This boots and passes the x86 pkey selftests.
Reported-by: Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200122165346.AD4DA150@viggo.jf.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
For the duration of mapping eVMCS, it derefences ->memslots without holding
->srcu or ->slots_lock when accessing hv assist page. This patch fixes it by
moving nested_sync_vmcs12_to_shadow to prepare_guest_switch, where the SRCU
is already taken.
It can be reproduced by running kvm's evmcs_test selftest.
=============================
warning: suspicious rcu usage
5.6.0-rc1+ #53 tainted: g w ioe
-----------------------------
./include/linux/kvm_host.h:623 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by evmcs_test/8507:
#0: ffff9ddd156d00d0 (&vcpu->mutex){+.+.}, at:
kvm_vcpu_ioctl+0x85/0x680 [kvm]
Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
The "u" field in the event has three states, -1/0/1. Using u8 however means that
comparison with -1 will always fail, so change to signed char.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
From the comment above the definition of the roundup_pow_of_two() macro:
The result is undefined when n == 0.
Hence only pass positive values to roundup_pow_of_two(). This patch fixes
the following UBSAN complaint:
UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
Call Trace:
dump_stack+0xa5/0xe6
ubsan_epilogue+0x9/0x26
__ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9
rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe]
rxe_modify_qp+0x59/0x70 [rdma_rxe]
_ib_modify_qp+0x5aa/0x7c0 [ib_core]
ib_modify_qp+0x3b/0x50 [ib_core]
cma_modify_qp_rtr+0x234/0x260 [rdma_cm]
__rdma_accept+0x1a7/0x650 [rdma_cm]
nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma]
cma_cm_event_handler+0x6b/0x330 [rdma_cm]
cma_ib_req_handler+0xe60/0x22d0 [rdma_cm]
cm_process_work+0x30/0x140 [ib_cm]
cm_req_handler+0x11f4/0x1cd0 [ib_cm]
cm_work_handler+0xb8/0x344e [ib_cm]
process_one_work+0x569/0xb60
worker_thread+0x7a/0x5d0
kthread+0x1e6/0x210
ret_from_fork+0x24/0x30
Link: https://lore.kernel.org/r/20200217205714.26937-1-bvanassche@acm.org Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
This test places a kprobe to function getname_flags() in the kernel
which has the following prototype:
struct filename *getname_flags(const char __user *filename, int flags, int *empty)
The 'filename' argument points to a filename located in user space memory.
Looking at commit 88903c464321c ("tracing/probe: Add ustring type for
user-space string") the kprobe should indicate that user space memory is
accessed.
Output before:
[root@m35lp76 perf]# ./perf test 66 67
66: Use vfs_getname probe to get syscall args filenames : FAILED!
67: Check open filename arg using perf trace + vfs_getname: FAILED!
[root@m35lp76 perf]#
Output after:
[root@m35lp76 perf]# ./perf test 66 67
66: Use vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok
[root@m35lp76 perf]#
Comments from Masami Hiramatsu:
This bug doesn't happen on x86 or other archs on which user address
space and kernel address space is the same. On some arches (ppc64 in
this case?) user address space is partially or completely the same as
kernel address space.
(Yes, they switch the world when running into the kernel) In this case,
we need to use different data access functions for each space.
That is why I introduced the "ustring" type for kprobe events.
As far as I can see, Thomas's patch is sane. Thomas, could you show us
your result on your test environment?
Comments from Thomas Richter:
Test results for s/390 included above.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200217102111.61137-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Some USB-audio descriptors provide a bogus volume range (e.g. volume
min and max are identical), which confuses user-space.
This patch makes the driver skipping such a control element.
Fixes a theoretical issue where it could potentially overwrite an existing
descriptor entry (and leaking its skb)
Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
During the cleanup of the aggregation session, a rx handler (or release timer)
on another CPU might still hold a pointer to the reorder buffer and could
attempt to release some packets.
Clearing pointers during cleanup avoids a theoretical use-after-free bug here.
Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
This patch avoids dma_mapping of a zero length sg which causes the panic,
by using sg_nents_for_len which maps only upto a specific length
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
There are currently three counters to track the IRQ context of a lock
chain - nr_hardirq_chains, nr_softirq_chains and nr_process_chains.
They are incremented when a new lock chain is added, but they are
not decremented when a lock chain is removed. That causes some of the
statistic counts reported by /proc/lockdep_stats to be incorrect.
IRQ
Fix that by decrementing the right counter when a lock chain is removed.
Since inc_chains() no longer accesses hardirq_context and softirq_context
directly, it is moved out from the CONFIG_TRACE_IRQFLAGS conditional
compilation block.
Fixes: a0b0fd53e1e6 ("locking/lockdep: Free lock classes that are no longer in use") Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200206152408.24165-2-longman@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
The call to of_find_matching_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/1554692313-28882-2-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
$# read after lseek to midle of last line
$ dd if=/sys/fs/selinux/avc/cache_stats bs=180 skip=1
dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset
056 9115 <<<< end of last line 15605711551548 9023 9023 9056 9115 <<< whole last line once again
0+1 records in
0+1 records out
45 bytes copied, 8,7221e-05 s, 516 kB/s
$# read after lseek beyond end of of file
$ dd if=/sys/fs/selinux/avc/cache_stats bs=1000 skip=1
dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset 15605711551548 9023 9023 9056 9115 <<<< generates whole last line
0+1 records in
0+1 records out
36 bytes copied, 9,0934e-05 s, 396 kB/s
Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Common Criteria calls out for any action that modifies the audit trail to
be recorded. That usually is interpreted to mean insertion or removal of
rules. It is not required to log modification of the inode information
since the watch is still in effect. Additionally, if the rule is a never
rule and the underlying file is one they do not want events for, they
get an event for this bookkeeping update against their wishes.
Since no device/inode info is logged at insertion and no device/inode
information is logged on update, there is nothing meaningful being
communicated to the admin by the CONFIG_CHANGE updated_rules event. One
can assume that the rule was not "modified" because it is still watching
the intended target. If the device or inode cannot be resolved, then
audit_panic is called which is sufficient.
The correct resolution is to drop logging config_update events since
the watch is still in effect but just on another unknown inode.
Signed-off-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
[Why]
these registers should have been double buffered. SW workaround we will have SW program the more aggressive (lower) values
whenever we are upating this register, so we will not have underflow at expense of less optimzal request pattern.
[How]
there is a driver bug where we don't check for 0, which is uninitialzed HW default. since 0 is smaller than any value we need to program,
driver end up with not programming these registers
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
perf does not know how to deal with a __builtin_bswap32() call, and
complains. All other functions just store the xid etc in host endian
form, so let's do that in the tracepoint for nfsd_file_acquire too.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
sk_buff.qlen can be accessed concurrently as noticed by KCSAN,
BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg
read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96:
unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821
net/unix/af_unix.c:1761
____sys_sendmsg+0x33e/0x370
___sys_sendmsg+0xa6/0xf0
__sys_sendmsg+0x69/0xf0
__x64_sys_sendmsg+0x51/0x70
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99:
__skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029
__skb_try_recv_datagram+0xbe/0x220
unix_dgram_recvmsg+0xee/0x850
____sys_recvmsg+0x1fb/0x210
___sys_recvmsg+0xa2/0xf0
__sys_recvmsg+0x66/0xf0
__x64_sys_recvmsg+0x51/0x70
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Since only the read is operating as lockless, it could introduce a logic
bug in unix_recvq_full() due to the load tearing. Fix it by adding
a lockless variant of skb_queue_len() and unix_recvq_full() where
READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to
the commit d7d16a89350a ("net: add skb_queue_empty_lockless()").
Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
RIRB interrupt status getting cleared after the write pointer is read
causes a race condition, where last response(s) into RIRB may remain
unserviced by IRQ, eventually causing azx_rirb_get_response to fall
back to polling mode. Clearing the RIRB interrupt status ahead of
write pointer access ensures that this condition is avoided.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Signed-off-by: Viswanath L <viswanathl@nvidia.com> Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Prefetch channel before killing sock in order to fix UAF like
BUG: KASAN: use-after-free in l2cap_sock_release+0x24c/0x290 net/bluetooth/l2cap_sock.c:1212
Read of size 8 at addr ffff8880944904a0 by task syz-fuzzer/9751
If walk_pte_range() is called with a 'end' argument that is beyond the
last page of memory (e.g. ~0UL) then the comparison between 'addr' and
'end' will always fail and the loop will be infinite. Instead change the
comparison to >= while accounting for overflow.
Link: http://lkml.kernel.org/r/20191218162402.45610-15-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
If seq_file .next fuction does not change position index, read after
some lseek can generate unexpected output.
In Aug 2018 NeilBrown noticed commit 1f4aace60b0e ("fs/seq_file.c:
simplify seq_file iteration code and interface") "Some ->next functions
do not increment *pos when they return NULL... Note that such ->next
functions are buggy and should be fixed. A simple demonstration is
dd if=/proc/swaps bs=1000 skip=1
Choose any block size larger than the size of /proc/swaps. This will
always show the whole last line of /proc/swaps"
Described problem is still actual. If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.
$ dd if=/proc/swaps bs=1 # usual output
Filename Type Size Used Priority
/dev/dm-0 partition 4194812 97536 -2
104+0 records in
104+0 records out
104 bytes copied
$ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice
dd: /proc/swaps: cannot skip to specified offset
v/dm-0 partition 4194812 97536 -2
/dev/dm-0 partition 4194812 97536 -2
3+1 records in
3+1 records out
131 bytes copied
There is no lock preventing both l2cap_sock_release() and
chan->ops->close() from running at the same time.
If we consider Thread A running l2cap_chan_timeout() and Thread B running
l2cap_sock_release(), expected behavior is:
A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb()
A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill()
B::l2cap_sock_release()->sock_orphan()
B::l2cap_sock_release()->l2cap_sock_kill()
where,
sock_orphan() clears "sk->sk_socket" and l2cap_sock_teardown_cb() marks
socket as SOCK_ZAPPED.
In l2cap_sock_kill(), there is an "if-statement" that checks if both
sock_orphan() and sock_teardown() has been run i.e. sk->sk_socket is NULL
and socket is marked as SOCK_ZAPPED. Socket is killed if the condition is
satisfied.
In the race condition, following occurs:
A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb()
B::l2cap_sock_release()->sock_orphan()
B::l2cap_sock_release()->l2cap_sock_kill()
A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill()
In this scenario, "if-statement" is true in both B::l2cap_sock_kill() and
A::l2cap_sock_kill() and we hit "refcount: underflow; use-after-free" bug.
Similar condition occurs at other places where teardown/sock_kill is
happening:
l2cap_disconnect_rsp()->l2cap_chan_del()->l2cap_sock_teardown_cb()
l2cap_disconnect_rsp()->l2cap_sock_close_cb()->l2cap_sock_kill()
Protect teardown/sock_kill and orphan/sock_kill by adding hold_lock on
l2cap channel to ensure that the socket is killed only after marked as
zapped and orphan.
Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Some syntax needs to be more rigorous for python 3.
Backwards compatibility tested with python 2.7
Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
test.d/ftrace/func-filter-glob.tc is failing on s390 because it has
ARCH_INLINE_SPIN_LOCK and friends set to 'y'. So the usual
__raw_spin_lock symbol isn't in the ftrace function list. Change
'*aw*lock' to '*spin*lock' which would hopefully match some of the
locking functions on all platforms.
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
If the caller passes in a NULL cap_reservation, and we can't allocate
one then ensure that we fail gracefully.
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC
"EZ Connect g").
This device uses ar5523 chipset and requires firmware to be loaded. Even
though pid of the device is 4507, this patch adds it as 4506 so that
AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid
4507.
Signed-off-by: Mert Dirik <mertdirik@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
The stacktrace code can read beyond the stack size, when it attempts to
read pt_regs from exception frames.
This can happen on normal, non-corrupt stacks. Since the unwind
information in the extable is not correct for function prologues, the
unwinding code can return data from the stack which is not actually the
caller function address, and if in_entry_text() happens to succeed on
this value, we can end up reading data from outside the task's stack
when attempting to read pt_regs, since there is no bounds check.
In this example, the stack limit is 0xeb492000, but 16 bytes outside the
stack have been read.
Fix it by adding bounds checks.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
I noticed when trying to use the trace-cmd python interface that reading the raw
buffer wasn't working for kernel_stack events. This is because it uses a
stubbed version of __dynamic_array that doesn't do the __data_loc trick and
encode the length of the array into the field. Instead it just shows up as a
size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES
since this is what we actually do in practice and matches how user_stack_trace
works.
Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.com Signed-off-by: Josef Bacik <jbacik@fb.com>
[ Pulled from the archeological digging of my INBOX ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Currently, kmemdup is applied to the firmware data, and it invokes
kmalloc under the hood. The firmware size and patch_length are big (more
than PAGE_SIZE), and on some low-end systems (like ASUS E202SA) kmalloc
may fail to allocate a contiguous chunk under high memory usage and
fragmentation:
Many drivers don't check for errors when they get a 0xFFs response from an
MMIO load. As a result after an EEH event occurs a driver can get stuck in
a polling loop unless it some kind of internal timeout logic.
Currently EEH tries to detect and report stuck drivers by dumping a stack
trace after eeh_dev_check_failure() is called EEH_MAX_FAILS times on an
already frozen PE. The value of EEH_MAX_FAILS was chosen so that a dump
would occur every few seconds if the driver was spinning in a loop. This
results in a lot of spurious stack traces in the kernel log.
Fix this by limiting it to printing one stack trace for each PE freeze. If
the driver is truely stuck the kernel's hung task detector is better suited
to reporting the probelm anyway.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com> Tested-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191016012536.22588-1-oohall@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
If nfsd_file_mark_find_or_create() keeps winning the race for the
nfsd_file_fsnotify_group->mark_mutex against nfsd_file_mark_put()
then it can soft lock up, since fsnotify_add_inode_mark() ends
up always finding an existing entry.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Use kzalloc() to allocate auxiliary buffer structure initialized
with all zeroes to avoid random value in trace output.
Avoid double access to SBD hardware flags.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Since the dma engine expects the burst length register content as
power of 2 value, the burst length needs to be converted first.
Additionally add a burst length range check to avoid corrupting unrelated
register bits.
Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net> Link: https://lore.kernel.org/r/20200115102249.24398-1-matthias.fend@wolfvision.net Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Inspired by btrfs-progs github issue #208, where chunk item in chunk
tree has invalid num_stripes (0).
Although that can already be caught by current btrfs_check_chunk_valid(),
that function doesn't really check item size as it needs to handle chunk
item in super block sys_chunk_array().
This patch will add two extra checks for chunk items in chunk tree:
- Basic chunk item size
If the item is smaller than btrfs_chunk (which already contains one
stripe), exit right now as reading num_stripes may even go beyond
eb boundary.
- Item size check against num_stripes
If item size doesn't match with calculated chunk size, then either the
item size or the num_stripes is corrupted. Error out anyway.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Potentially it is possible that interrupt may fire after transfer timeout.
That may not end up well for the next transfer because interrupt handling
may race with hardware resetting.
This is very unlikely to happen in practice, but anyway let's prevent the
potential problem by enabling interrupt only at the moments when it is
actually necessary to get some interrupt event.
Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.
memset to 0 to avoid this
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Starting execution of a command before tracing a command may cause the
completion handler to free data while it is being traced. Fix this race by
tracing a command before it is submitted.
Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-5-bvanassche@acm.org Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Since the lrbp->cmd expression occurs multiple times, introduce a new local
variable to hold that pointer. This patch does not change any
functionality.
Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-3-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
There is a race condition in acpi_ec_get_query_handler()
theoretically allowing query handlers to go away before refernce
counting them.
In order to avoid it, call kref_get() on query handlers under
ec->mutex.
Also simplify the code a bit while at it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
The original patch bringed in the "SCTP ACK tracking trace event"
feature was committed at Dec.20, 2017, it replaced jprobe usage
with trace events, and bringed in two trace events, one is
TRACE_EVENT(sctp_probe), another one is TRACE_EVENT(sctp_probe_path).
The original patch intended to trigger the trace_sctp_probe_path in
TRACE_EVENT(sctp_probe) as below code,
But I found it did not work when I did testing, and trace_sctp_probe_path
had no output, I finally found that there is trace buffer lock
operation(trace_event_buffer_reserve) in include/trace/trace_events.h:
The reason caused no output of trace_sctp_probe_path is that
trace_sctp_probe_path written in TP_fast_assign part of
TRACE_EVENT(sctp_probe), and it will be placed( { assign; } ) after the
trace_event_buffer_reserve() when compiler expands Macro,
so trace_sctp_probe_path finally can not acquire trace_event_buffer
and return no output, that is to say the nest of tracepoint entry function
is not allowed. The function call flow is:
trace_sctp_probe()
-> trace_event_raw_event_sctp_probe()
-> lock buffer
-> trace_sctp_probe_path()
-> trace_event_raw_event_sctp_probe_path() --nested
-> buffer has been locked and return no output.
This patch is to remove trace_sctp_probe_path from the TP_fast_assign
part of TRACE_EVENT(sctp_probe) to avoid the nest of entry function,
and trigger sctp_probe_path_trace in sctp_outq_sack.
After this patch, you can enable both events individually,
# cd /sys/kernel/debug/tracing
# echo 1 > events/sctp/sctp_probe/enable
# echo 1 > events/sctp/sctp_probe_path/enable
Or, you can enable all the events under sctp.
# echo 1 > events/sctp/enable
Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Fix race condition between GNL completion processing and GNL request. Late
submission of GNL request was not seen by the GNL completion thread. This
patch will re-submit the GNL request for late submission fcport.
Link: https://lore.kernel.org/r/20191217220617.28084-13-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
A kref or refcount isn't the right tool to be used here for counting
number of devices that are sharing the static OPPs created for the OPP
table. For example, we are reinitializing the kref again, after it
reaches a value of 0 and frees the resources, if the static OPPs get
added for the same OPP table structure (as the OPP table structure was
never freed). That is messy and very unclear.
This patch makes parsed_static_opps an unsigned integer and uses it to
count the number of users of the static OPPs. The increment and
decrement to parsed_static_opps is done under opp_table->lock now to
make sure no races are possible if the OPP table is getting added and
removed in parallel (which doesn't happen in practice, but can in
theory).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
Problem:
Due to a race between drm_sched_cleanup_jobs in sched thread and
drm_sched_job_timedout in timeout work there is a possiblity that
bad job was already freed while still being accessed from the
timeout thread.
Fix:
Instead of just peeking at the bad job in the mirror list
remove it from the list under lock and then put it back later when
we are garanteed no race with main sched thread is possible which
is after the thread is parked.
v2: Lock around processing ring_mirror_list in drm_sched_cleanup_jobs.
v3: Rebase on top of drm-misc-next. v2 is not needed anymore as
drm_sched_get_cleanup_job already has a lock there.
v4: Fix comments to relfect latest code in drm-misc.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Tested-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/342356 Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
This patch proposes to require marked atomic accesses surrounding
raw_write_seqcount_barrier. We reason that otherwise there is no way to
guarantee propagation nor atomicity of writes before/after the barrier
[1]. For example, consider the compiler tears stores either before or
after the barrier; in this case, readers may observe a partial value,
and because readers are unaware that writes are going on (writes are not
in a seq-writer critical section), will complete the seq-reader critical
section while having observed some partial state.
[1] https://lwn.net/Articles/793253/
This came up when designing and implementing KCSAN, because KCSAN would
flag these accesses as data-races. After careful analysis, our reasoning
as above led us to conclude that the best thing to do is to propose an
amendment to the raw_seqcount_barrier usage.
Signed-off-by: Marco Elver <elver@google.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>
projects / mirror_ubuntu-focal-kernel.git / log