fanotify: don't wank with FASYNC on ->release()

... it's done already by __fput()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sock_close() couldn't have been called with NULL inode since at least 2.1.early

... if not since 0.99 or so.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

tomoyo_close_control: don't bother with return value

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dmasound_core: saner arguments for sq_fsync()

it is not (and it has never been) an ->fsync() instance...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

hppfs: get rid of ->fsync()

it has grown by accident - directories there do *not* use page cache, so
there's nothing to write.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

hppfs: fix the leaks on close()

we need to close the underlying procfs file and free ->private_data

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

new helper: read_code()

switch binfmts that use ->read() to that (and to kernel_read()
in several cases in binfmt_flat - sure, it's nommu, but still,
doing ->read() into kmalloc'ed buffer...)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

cx25821: sanitize cx25821_openfile_audio() a bit...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

cx25821: sanitize cx25821_get_audio_data() a bit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

try a saner locking for pde_opener...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

deal with races between remove_proc_entry() and proc_reg_release()

* serialize the call of ->release() on per-pdeo mutex
* don't remove pdeo from per-pde list until we are through with it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

procfs: preparations for remove_proc_entry() race fixes

* leave ->proc_fops alone; make ->pde_users negative instead
* trim pde_opener
* move relevant code in fs/proc/inode.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

procfs: Clean up huge if-statement in __proc_file_read()

Switch huge if-statement in __proc_file_read() around.  This then puts the
single line loop break immediately after the if-statement and allows us to
de-indent the huge comment and make it take fewer lines.  The code following
the if-statement then follows naturally from the call to dp->read_proc().

Signed-off-by: David Howells <dhowells@redhat.com>

vt6655: slightly clean reading config file

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vt6656: slightly sanitized reading config

Just reading - parsing the results is left alone (and unspeakably
lousy).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sound_firmware: don't bother with filp_close()

it's opened read-only and never installed into any descriptor tables;
fput() will do just as well.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

pxa3xx-gcu: stop embedding file_operations into device-private object

no need to do that anymore...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

pxa3xx-gcu: quite playing silly buggers with ->f_op

misc device gets ->private_data pointing to struct miscdevice
on open(), so we can use that to get to per-device structure
instead of relying on file_operations being copied into it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

silicom-bypass: Remove device_open/close()

Remove device_open/close() functions as they don't really do anything and
remove Device_Open as it isn't counted atomically and the value isn't used.

Signed-off-by: David Howells <dhowells@redhat.com>

proc: Kill create_proc_entry()

Kill create_proc_entry() in favour of create_proc_read_entry(), proc_create()
and proc_create_data().

Signed-off-by: David Howells <dhowells@redhat.com>

wlags49_h2: Don't use create_proc_entry()

create_proc_entry() shouldn't be used.  Rather proc_create_data() should be
used.  The proc_write() function is only used by #if'd out code, so delete it
for now.

Signed-off-by: David Howells <dhowells@redhat.com>

nubus: Don't use create_proc_entry()

Don't use create_proc_entry() in nubus_proc_subdir().  The files created aren't
given any way to use them, so for the moment use create_proc_read_entry() with
a NULL accessor and generate a compile-time warning.

Signed-off-by: David Howells <dhowells@redhat.com>

UM: Adjust printk in create_proc_mconsole()

Adjust printk in create_proc_mconsole() to reflect it is now using
proc_create() not create_proc_mconsole().

Signed-off-by: David Howells <dhowells@redhat.com>

constify a bunch of struct file_operations instances

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

bluetooth: kill unused fops field in struct bt_sock_list

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

bluetooth: fix race in bt_procfs_init()

use proc_create_data() rather than set ->data after the file has
been created

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

bluetooth: kill unused 'module' argument of bt_procfs_init()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

bluetooth: don't bother with ->owner for procfs fops

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

x25: use proc_remove_subtree()

... and don't bother with ->owner, while we are at it - procfs fops
do not need it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

create_proc_cpu_mask() doesn't need an argument...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

lparcfg: don't bother saving pointer to proc_dir_entry

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

prominfo_proc fixes

* check for proc_mkdir() failures
* use remove_proc_subtree()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

srm_env: don't bother with pointer to srm_env_t

Since the only thing in it the methods actually care about is
variable id, just store that directly.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

srm_env: use proc_remove_subtree()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

procfs: new helper - PDE_DATA(inode)

The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data.  Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

last_radio_log: switch to proc_create()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

procfs: kill ->write_proc()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

bfin_adv7393: switch to proc_create_data()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

xtensa simdisk: switch to proc_create_data()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

rtl8192u: switch to proc_create()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

scsi_proc: make proc_scsi_host_open() preallocate a bigger buffer

Some of the ->show_info() instances really spew a lot; it's not a problem
wrt correctness (seq_read() will grow buffer and call the sucker again),
but in this case it makes sense to start with a somewhat bigger one -
they often do exceed one page worth of output.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

new helper: single_open_size()

Same as single_open(), but preallocates the buffer of given size.
Doesn't make any sense for sizes up to PAGE_SIZE and doesn't make
sense if output of show() exceeds PAGE_SIZE only rarely - seq_read()
will take care of growing the buffer and redoing show().  If you
_know_ that it will be large, it might make more sense to look into
saner iterator, rather than go with single-shot one.  If that's
impossible, single_open_size() might be for you.

Again, don't use that without a good reason; occasionally that's really
the best way to go, but very often there are better solutions.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

scsi: bury ->proc_info()

all users converted to ->show_info()/->write_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

atari_scsi: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

aix7xxx_old: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sata_svw: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ips: fix format bugs exposed by previous commit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ips: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

acornscsi: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fas216: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

aic7xxx: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

aic79xx: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

in2000: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

atp870u: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dc395x: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dpt_i2o: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

eata_pio: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

aha1740: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

aha152x: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

advansys: fix buggered formats - unsigned long != u32 on 64bit

asc_prt_line() had been hiding several places where formats had not
matched the argument types.  The previous commit has finally made them
visible...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

advansys: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

nsp_cs: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

nsp32: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

keucr: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

rts5139: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

tcm: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

cciss: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

BusLogic: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

scsi_debug: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fusion: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

usb-storage: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

NCR5830: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ppa: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

imm: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

gdth: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

switch wd33c93 to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

wd7000: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sym53c8xx_2: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

scsi: saner replacements for ->proc_info()

It's still an obsolete interface; don't introduce those in new drivers.
However, it's saner than the ->proc_info() and commits after this one
will convert the existing ->proc_info() users to it.

The read side is ->show_info(seq_file *, struct Scsi_Host *); use
seq_... for generating contents.

The write side is ->write_info(struct Scsi_Host *, char *, int).

Again, this is driven by procfs needs; we are going to kill ->write_proc()
and ->read_proc() and this is the main obstacle to burying that piece of
shit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

procfs: don't allow to use proc_create, create_proc_entry, etc. for directories

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

i2o: use proc_remove_subtree()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

silicom: bury bp_proc.c

It's a seriously rotten copy of parts of bp_mod.c; had been
ifdefed out all along, lacks a bunch of declarations that would
be needed if ifdef had been removed, all stuff in it is duplicated
in bp_mod.c anyway...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

silicom: switch to create_proc_data(), clean procfs side of things up

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

reiserfs: use proc_remove_subtree()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

silicom: untangle module_init

Helper functions are often useful.  So are local variables...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

silicom: get_bypass_slave_pfs() open-codes lookup_port()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

silicom: unobfuscate get_{status,master}_port_fn()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

silicom: helper functions are often useful...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

get rid of a bunch of open-coded create_proc_read_entry()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

isp1362-hcd: don't reimplement proc_create_data()

... especially in a racy way

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

rtl8192u: don't play with reassigning ->proc_fops, just use proc_create()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dgrp procfs fixes, part 6: just use proc_create{,_data}

->permission() of its own is a rudiment of sysctl imitation;
normal procfs logics will do just fine here, no need to
mess with ->proc_iops at all.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dgrp procfs fixes, part 5: per-node files

this "hooks" scheme is pointless - just make file_operations non-static
and consolidate initialiazation bits.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dgrp procfs fixes, part 4: get rid of sysctl-like machinery

racy and very overblown...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dgrp procfs fixes, part 3: kill dead code

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dgrp procfs fixes, part 2

All table entries either have non-NULL ->proc_file_fops or
non-NULL child.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dgrp procfs fixes, part 1

proc_create() has shat upon fops argument when mode is S_IFDIR.
Good thing, too, since fops passed to it is completely useless
for any directory.  Just use proc_mkdir(), damnit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The rtl8192e procfs-based debug interface seems very broken

The procfs debug code in rtl_debug.c is, ironically, very buggy: it lacks proper locking.
Since the most useful part of the code (the stats) are available through more
standard APIs, I think it is best to just delete the whole mess.

Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

rtl8192e: switch to proc_create()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

rtl8192e: don't use create_proc_entry() for directories

proc_mkdir() is there for purpose...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>