Since this driver enables the interrupt by RIC2_QFE1, this driver
should clear the interrupt flag if it happens. Otherwise, the interrupt
causes to hang the system.
Note that this also fix a minor coding style (a comment indentation)
around the fixed code.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ravb: Fix lack of register setting after system resumed for Gen3
After system entered Suspend to RAM, registers setting of this
hardware is reset because the SoC will be turned off. On R-Car Gen3
(info->ccc_gac), ravb_ptp_init() is called in ravb_probe() only. So,
after system resumed, it lacks of the initial settings for ptp. So,
add ravb_ptp_{init,stop}() into ravb_{resume,suspend}().
Fixes: f5d7837f96e5 ("ravb: ptp: Add CONFIG mode support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
Hyunwoo Kim [Mon, 23 Jan 2023 19:43:23 +0000 (11:43 -0800)]
net/x25: Fix to not accept on connected socket
When listen() and accept() are called on an x25 socket
that connect() succeeds, accept() succeeds immediately.
This is because x25_connect() queues the skb to
sk->sk_receive_queue, and x25_accept() dequeues it.
This creates a child socket with the sk of the parent
x25 socket, which can cause confusion.
Fix x25_listen() to return -EINVAL if the socket has
already been successfully connect()ed to avoid this issue.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Perform SCTP vtag verification for ABORT/SHUTDOWN_COMPLETE according
to RFC 9260, Sect 8.5.1.
2) Fix infinite loop if SCTP chunk size is zero in for_each_sctp_chunk().
And remove useless check in this macro too.
3) Revert DATA_SENT state in the SCTP tracker, this was applied in the
previous merge window. Next patch in this series provides a more
simple approach to multihoming support.
4) Unify HEARTBEAT_ACKED and ESTABLISHED states for SCTP multihoming
support, use default ESTABLISHED of 210 seconds based on
heartbeat timeout * maximum number of retransmission + round-trip timeout.
Otherwise, SCTP conntrack entry that represents secondary paths
remain stale in the table for up to 5 days.
This is a slightly large batch with fixes for the SCTP connection
tracking helper, all patches from Sriram Yagnaraman.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: unify established states for SCTP paths
Revert "netfilter: conntrack: add sctp DATA_SENT state"
netfilter: conntrack: fix bug in for_each_sctp_chunk
netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
====================
Commit a286ba738714 ("ice: reorder PF/representor devlink
port register/unregister flows") moved the code to create
and destroy the devlink PF port. This was fine, but created
a corner case issue in the case of ice_register_netdev()
failing. In that case, the driver would end up calling
ice_devlink_destroy_pf_port() twice.
Additionally, it makes no sense to tie creation of the devlink
PF port to the creation of the netdev so separate out the
code to create/destroy the devlink PF port from the netdev
code. This makes it a cleaner interface.
Fixes: a286ba738714 ("ice: reorder PF/representor devlink port register/unregister flows") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp: fail if no bound addresses can be used for a given scope
Currently, if you bind the socket to something like:
servaddr.sin6_family = AF_INET6;
servaddr.sin6_port = htons(0);
servaddr.sin6_scope_id = 0;
inet_pton(AF_INET6, "::1", &servaddr.sin6_addr);
And then request a connect to:
connaddr.sin6_family = AF_INET6;
connaddr.sin6_port = htons(20000);
connaddr.sin6_scope_id = if_nametoindex("lo");
inet_pton(AF_INET6, "fe88::1", &connaddr.sin6_addr);
What the stack does is:
- bind the socket
- create a new asoc
- to handle the connect
- copy the addresses that can be used for the given scope
- try to connect
But the copy returns 0 addresses, and the effect is that it ends up
trying to connect as if the socket wasn't bound, which is not the
desired behavior. This unexpected behavior also allows KASLR leaks
through SCTP diag interface.
The fix here then is, if when trying to copy the addresses that can
be used for the scope used in connect() it returns 0 addresses, bail
out. This is what TCP does with a similar reproducer.
syzbot reported a use-after-free in do_accept(), precisely nr_accept()
as sk_prot_alloc() allocated the memory and sock_put() frees it. [0]
The issue could happen if the heartbeat timer is fired and
nr_heartbeat_expiry() calls nr_destroy_socket(), where a socket
has SOCK_DESTROY or a listening socket has SOCK_DEAD.
In this case, the first condition cannot be true. SOCK_DESTROY is
flagged in nr_release() only when the file descriptor is close()d,
but accept() is being called for the listening socket, so the second
condition must be true.
Usually, the AF_NETROM listener neither starts timers nor sets
SOCK_DEAD. However, the condition is met if connect() fails before
listen(). connect() starts the t1 timer and heartbeat timer, and
t1timer calls nr_disconnect() when timeout happens. Then, SOCK_DEAD
is set, and if we call listen(), the heartbeat timer calls
nr_destroy_socket().
This path seems expected, and nr_destroy_socket() is called to clean
up resources. Initially, there was sock_hold() before nr_destroy_socket()
so that the socket would not be freed, but the commit 517a16b1a88b
("netrom: Decrease sock refcount when sock timers expire") accidentally
removed it.
To fix use-after-free, let's add sock_hold().
[0]:
BUG: KASAN: use-after-free in do_accept+0x483/0x510 net/socket.c:1848
Read of size 8 at addr ffff88807978d398 by task syz-executor.3/5315
netfilter: conntrack: unify established states for SCTP paths
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
This reverts commit (bff3d0534804: "netfilter: conntrack: add sctp
DATA_SENT state")
Using DATA/SACK to detect a new connection on secondary/alternate paths
works only on new connections, while a HEARTBEAT is required on
connection re-use. It is probably consistent to wait for HEARTBEAT to
create a secondary connection in conntrack.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
RFC 9260, Sec 8.5.1 states that for ABORT/SHUTDOWN_COMPLETE, the chunk
MUST be accepted if the vtag of the packet matches its own tag and the
T bit is not set OR if it is set to its peer's vtag and the T bit is set
in chunk flags. Otherwise the packet MUST be silently dropped.
Update vtag verification for ABORT/SHUTDOWN_COMPLETE based on the above
description.
Jakub Kicinski [Tue, 24 Jan 2023 06:36:58 +0000 (22:36 -0800)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-20 (iavf)
This series contains updates to iavf driver only.
Michal Schmidt converts single iavf workqueue to per adapter to avoid
deadlock issues.
Marcin moves setting of VLAN related netdev features to watchdog task to
avoid RTNL deadlock.
Stefan Assmann schedules immediate watchdog task execution on changing
primary MAC to avoid excessive delay.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: schedule watchdog immediately when changing primary MAC
iavf: Move netdev_update_features() into watchdog task
iavf: fix temporary deadlock and failure to set MAC address
====================
1) Fix overlap detection in rbtree set backend: Detect overlap by going
through the ordered list of valid tree nodes. To shorten the number of
visited nodes in the list, this algorithm descends the tree to search
for an existing element greater than the key value to insert that is
greater than the new element.
2) Fix for the rbtree set garbage collector: Skip inactive and busy
elements when checking for expired elements to avoid interference
with an ongoing transaction from control plane.
This is a rather large fix coming at this stage of the 6.2-rc. Since 33c7aba0b4ff ("netfilter: nf_tables: do not set up extensions for end
interval"), bogus overlap errors in the rbtree set occur more frequently.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_rbtree: skip elements in transaction from garbage collection
netfilter: nft_set_rbtree: Switch to node list walk for overlap detection
====================
Mat Martineau [Fri, 20 Jan 2023 23:11:21 +0000 (15:11 -0800)]
MAINTAINERS: Update MPTCP maintainer list and CREDITS
My responsibilities at Intel have changed, so I'm handing off exclusive
MPTCP subsystem maintainer duties to Matthieu. It has been a privilege
to see MPTCP through its initial upstreaming and first few years in the
upstream kernel!
Driver marked broadcast/multicast frames as offloaded incorrectly.
Mark them as offloaded only when HW offloading has been enabled.
This should happen only for ADIN2111 when both ports are bridged
by the software.
Ahmad Fatoum [Fri, 20 Jan 2023 11:09:32 +0000 (12:09 +0100)]
net: dsa: microchip: fix probe of I2C-connected KSZ8563
Starting with commit eee16b147121 ("net: dsa: microchip: perform the
compatibility check for dev probed"), the KSZ switch driver now bails
out if it thinks the DT compatible doesn't match the actual chip ID
read back from the hardware:
ksz9477-switch 1-005f: Device tree specifies chip KSZ9893 but found
KSZ8563, please fix it!
For the KSZ8563, which used ksz_switch_chips[KSZ9893], this was fine
at first, because it indeed shares the same chip id as the KSZ9893.
Commit b44908095612 ("net: dsa: microchip: add separate struct
ksz_chip_data for KSZ8563 chip") started differentiating KSZ9893
compatible chips by consulting the 0x1F register. The resulting breakage
was fixed for the SPI driver in the same commit by introducing the
appropriate ksz_switch_chips[KSZ8563], but not for the I2C driver.
Fix this for I2C-connected KSZ8563 now to get it probing again.
Fixes: b44908095612 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip"). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230120110933.1151054-1-a.fatoum@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 20 Jan 2023 12:59:53 +0000 (12:59 +0000)]
netlink: annotate data races around nlk->portid
syzbot reminds us netlink_getname() runs locklessly [1]
This first patch annotates the race against nlk->portid.
Following patches take care of the remaining races.
[1]
BUG: KCSAN: data-race in netlink_getname / netlink_insert
write to 0xffff88814176d310 of 4 bytes by task 2315 on cpu 1:
netlink_insert+0xf1/0x9a0 net/netlink/af_netlink.c:583
netlink_autobind+0xae/0x180 net/netlink/af_netlink.c:856
netlink_sendmsg+0x444/0x760 net/netlink/af_netlink.c:1895
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2476
___sys_sendmsg net/socket.c:2530 [inline]
__sys_sendmsg+0x19a/0x230 net/socket.c:2559
__do_sys_sendmsg net/socket.c:2568 [inline]
__se_sys_sendmsg net/socket.c:2566 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2566
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88814176d310 of 4 bytes by task 2316 on cpu 0:
netlink_getname+0xcd/0x1a0 net/netlink/af_netlink.c:1144
__sys_getsockname+0x11d/0x1b0 net/socket.c:2026
__do_sys_getsockname net/socket.c:2041 [inline]
__se_sys_getsockname net/socket.c:2038 [inline]
__x64_sys_getsockname+0x3e/0x50 net/socket.c:2038
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00000000 -> 0xc9a49780
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2316 Comm: syz-executor.2 Not tainted 6.2.0-rc3-syzkaller-00030-ge8f60cd7db24-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netfilter: nft_set_rbtree: skip elements in transaction from garbage collection
Skip interference with an ongoing transaction, do not perform garbage
collection on inactive elements. Reset annotated previous end interval
if the expired element is marked as busy (control plane removed the
element right before expiration).
netfilter: nft_set_rbtree: Switch to node list walk for overlap detection
...instead of a tree descent, which became overly complicated in an
attempt to cover cases where expired or inactive elements would affect
comparisons with the new element being inserted.
Further, it turned out that it's probably impossible to cover all those
cases, as inactive nodes might entirely hide subtrees consisting of a
complete interval plus a node that makes the current insertion not
overlap.
To speed up the overlap check, descent the tree to find a greater
element that is closer to the key value to insert. Then walk down the
node list for overlap detection. Starting the overlap check from
rb_first() unconditionally is slow, it takes 10 times longer due to the
full linear traversal of the list.
Moreover, perform garbage collection of expired elements when walking
down the node list to avoid bogus overlap reports.
For the insertion operation itself, this essentially reverts back to the
implementation before commit 7c84d41416d8 ("netfilter: nft_set_rbtree:
Detect partial overlaps on insertion"), except that cases of complete
overlap are already handled in the overlap detection phase itself, which
slightly simplifies the loop to find the insertion point.
Based on initial patch from Stefano Brivio, including text from the
original patch description too.
Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion") Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Gergely Risko [Thu, 19 Jan 2023 13:40:41 +0000 (14:40 +0100)]
ipv6: fix reachability confirmation with proxy_ndp
When proxying IPv6 NDP requests, the adverts to the initial multicast
solicits are correct and working. On the other hand, when later a
reachability confirmation is requested (on unicast), no reply is sent.
This causes the neighbor entry expiring on the sending node, which is
mostly a non-issue, as a new multicast request is sent. There are
routers, where the multicast requests are intentionally delayed, and in
these environments the current implementation causes periodic packet
loss for the proxied endpoints.
The root cause is the erroneous decrease of the hop limit, as this
is checked in ndisc.c and no answer is generated when it's 254 instead
of the correct 255.
Cc: stable@vger.kernel.org Fixes: 46c7655f0b56 ("ipv6: decrease hop limit counter in ip6_forward()") Signed-off-by: Gergely Risko <gergely.risko@gmail.com> Tested-by: Gergely Risko <gergely.risko@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 23 Jan 2023 10:58:12 +0000 (10:58 +0000)]
Merge branch 'ethtool-mac-merge'
Vladimir Oltean say:
====================
ethtool support for IEEE 802.3 MAC Merge layer
Change log
----------
v3->v4:
- add missing opening bracket in ocelot_port_mm_irq()
- moved cfg.verify_time range checking so that it actually takes place
for the updated rather than old value
v3 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230117085947.2176464-1-vladimir.oltean@nxp.com/
v2->v3:
- made get_mm return int instead of void
- deleted ETHTOOL_A_MM_SUPPORTED
- renamed ETHTOOL_A_MM_ADD_FRAG_SIZE to ETHTOOL_A_MM_TX_MIN_FRAG_SIZE
- introduced ETHTOOL_A_MM_RX_MIN_FRAG_SIZE
- cleaned up documentation
- rebased on top of PLCA changes
- renamed ETHTOOL_STATS_SRC_* to ETHTOOL_MAC_STATS_SRC_*
v2 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230111161706.1465242-1-vladimir.oltean@nxp.com/
v1->v2:
I've decided to focus just on the MAC Merge layer for now, which is why
I am able to submit this patch set as non-RFC.
v1 (RFC) at:
https://patchwork.kernel.org/project/netdevbpf/cover/20220816222920.1952936-1-vladimir.oltean@nxp.com/
What is being introduced
------------------------
TL;DR: a MAC Merge layer as defined by IEEE 802.3-2018, clause 99
(interspersing of express traffic). This is controlled through ethtool
netlink (ETHTOOL_MSG_MM_GET, ETHTOOL_MSG_MM_SET). The raw ethtool
commands are posted here:
https://patchwork.kernel.org/project/netdevbpf/cover/20230111153638.1454687-1-vladimir.oltean@nxp.com/
The MAC Merge layer has its own statistics counters
(ethtool --include-statistics --show-mm swp0) as well as two member
MACs, the statistics of which can be queried individually, through a new
ethtool netlink attribute, corresponding to:
The core properties of the MAC Merge layer are described in great detail
in patches 02/12 and 03/12. They can be viewed in "make htmldocs" format.
Devices for which the API is supported
--------------------------------------
I decided to start with the Ethernet switch on NXP LS1028A (Felix)
because of the smaller patch set. I also have support for the ENETC
controller pending.
I would like to get confirmation that the UAPI being proposed here will
not restrict any use cases known by other hardware vendors.
Why is support for preemptible traffic classes not here?
--------------------------------------------------------
There is legitimate concern whether the 802.1Q portion of the standard
(which traffic classes go to the eMAC and which to the pMAC) should be
modeled in Linux using tc or using another UAPI. I think that is
stalling the entire series, but should be discussed separately instead.
Removing FP adminStatus support makes me confident enough to submit this
patch set without an RFC tag (meaning: I wouldn't mind if it was merged
as is).
What is submitted here is sufficient for an LLDP daemon to do its job.
I've patched openlldp to advertise and configure frame preemption:
https://github.com/vladimiroltean/openlldp/tree/frame-preemption-v3
In case someone wants to try it out, here are some commands I've used.
# Configure the interfaces to receive and transmit LLDP Data Units
lldptool -L -i eno0 adminStatus=rxtx
lldptool -L -i swp0 adminStatus=rxtx
# Enable the transmission of certain TLVs on switch's interface
lldptool -T -i eno0 -V addEthCap enableTx=yes
lldptool -T -i swp0 -V addEthCap enableTx=yes
# Query LLDP statistics on switch's interface
lldptool -S -i swp0
# Query the received neighbor TLVs
lldptool -i swp0 -t -n -V addEthCap
Additional Ethernet Capabilities TLV
Preemption capability supported
Preemption capability enabled
Preemption capability active
Additional fragment size: 60 octets
So using this patch set, lldpad will be able to advertise and configure
frame preemption, but still, no data packet will be sent as preemptible
over the link, because there is no UAPI to control which traffic classes
are sent as preemptible and which as express.
Preemptable or preemptible?
---------------------------
IEEE 802.3 uses "preemptable" throughout. IEEE 802.1Q uses "preemptible"
throughout. Because the definition of "preemptible" falls under 802.1Q's
jurisdiction and 802.3 just references it, I went with the 802.1Q naming
even where supporting an 802.3 feature. Also, checkpatch agrees with this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the fact that the kernel-side data structures have been carried
over from the ioctl-based ethtool, we are now in the situation where we
have an ethnl_update_bool32() function, but the plain function that
operates on a boolean value kept in an actual u8 netlink attribute
doesn't exist.
With new ethtool features that are exposed solely over netlink, the
kernel data structures will use the "bool" type, so we will need this
kind of helper. Introduce it now; it's needed for things like
verify-disabled for the MAC merge configuration.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Fang [Thu, 19 Jan 2023 04:37:47 +0000 (12:37 +0800)]
net: fec: Use page_pool_put_full_page when freeing rx buffers
The page_pool_release_page was used when freeing rx buffers, and this
function just unmaps the page (if mapped) and does not recycle the page.
So after hundreds of down/up the eth0, the system will out of memory.
For more details, please refer to the following reproduce steps and
bug logs. To solve this issue and refer to the doc of page pool, the
page_pool_put_full_page should be used to replace page_pool_release_page.
Because this API will try to recycle the page if the page refcnt equal to
1. After testing 20000 times, the issue can not be reproduced anymore
(about testing 391 times the issue will occur on i.MX8MN-EVK before).
Reproduce steps:
Create the test script and run the script. The script content is as
follows:
LOOPS=20000
i=1
while [ $i -le $LOOPS ]
do
echo "TINFO:ENET $curface up and down test $i times"
org_macaddr=$(cat /sys/class/net/eth0/address)
ifconfig eth0 down
ifconfig eth0 hw ether $org_macaddr up
i=$(expr $i + 1)
done
sleep 5
if cat /sys/class/net/eth0/operstate | grep 'up';then
echo "TEST PASS"
else
echo "TEST FAIL"
fi
Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: shenwei wang <Shenwei.wang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 19 Jan 2023 18:55:45 +0000 (19:55 +0100)]
net: fix UaF in netns ops registration error path
If net_assign_generic() fails, the current error path in ops_init() tries
to clear the gen pointer slot. Anyway, in such error path, the gen pointer
itself has not been modified yet, and the existing and accessed one is
smaller than the accessed index, causing an out-of-bounds error:
BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320
Write of size 8 at addr ffff888109124978 by task modprobe/1018
Eric Dumazet [Thu, 19 Jan 2023 11:01:50 +0000 (11:01 +0000)]
netlink: prevent potential spectre v1 gadgets
Most netlink attributes are parsed and validated from
__nla_validate_parse() or validate_nla()
u16 type = nla_type(nla);
if (type == 0 || type > maxtype) {
/* error or continue */
}
@type is then used as an array index and can be used
as a Spectre v1 gadget.
array_index_nospec() can be used to prevent leaking
content of kernel memory to malicious users.
This should take care of vast majority of netlink uses,
but an audit is needed to take care of others where
validation is not yet centralized in core netlink functions.
Linus Torvalds [Fri, 20 Jan 2023 17:58:44 +0000 (09:58 -0800)]
Merge tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bluetooth, bpf and netfilter.
Current release - regressions:
- Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
addrconf", fix nsna_ping mode of team
- wifi: mt76: fix bugs in Rx queue handling and DMA mapping
- eth: mlx5:
- add missing mutex_unlock in error reporter
- protect global IPsec ASO with a lock
Current release - new code bugs:
- rxrpc: fix wrong error return in rxrpc_connect_call()
Previous releases - regressions:
- bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2
- wifi:
- mac80211: fix crashes on Rx due to incorrect initialization of
rx->link and rx->link_sta
- mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
aggregation handling, crashes
- brcmfmac: fix regression for Broadcom PCIe wifi devices
- rndis_wlan: prevent buffer overflow in rndis_query_oid
- netfilter: conntrack: handle tcp challenge acks during connection
reuse
- sched: avoid grafting on htb_destroy_class_offload when destroying
- virtio-net: correctly enable callback during start_xmit, fix stalls
- tcp: avoid the lookup process failing to get sk in ehash table
- ipa: disable ipa interrupt during suspend
- eth: stmmac: enable all safety features by default
Previous releases - always broken:
- bpf:
- fix pointer-leak due to insufficient speculative store bypass
mitigation (Spectre v4)
- skip task with pid=1 in send_signal_common() to avoid a splat
- fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events
- fix potential deadlock in htab_lock_bucket from same bucket
index but different map_locked index
- bluetooth:
- fix a buffer overflow in mgmt_mesh_add()
- hci_qca: fix driver shutdown on closed serdev
- ISO: fix possible circular locking dependency
- CIS: hci_event: fix invalid wait context
- wifi: brcmfmac: fixes for survey dump handling
- mptcp: explicitly specify sock family at subflow creation time
- netfilter: nft_payload: incorrect arithmetics when fetching VLAN
header bits
- tcp: fix rate_app_limited to default to 1
- l2tp: close all race conditions in l2tp_tunnel_register()
- eth: mlx5: fixes for QoS config and eswitch configuration
- eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
- eth: stmmac: fix invalid call to mdiobus_get_phy()
Misc:
- ethtool: add netlink attr in rss get reply only if the value is not
empty"
* tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
Revert "Merge branch 'octeontx2-af-CPT'"
tcp: fix rate_app_limited to default to 1
bnxt: Do not read past the end of test names
net: stmmac: enable all safety features by default
octeontx2-af: add mbox to return CPT_AF_FLT_INT info
octeontx2-af: update cpt lf alloc mailbox
octeontx2-af: restore rxc conf after teardown sequence
octeontx2-af: optimize cpt pf identification
octeontx2-af: modify FLR sequence for CPT
octeontx2-af: add mbox for CPT LF reset
octeontx2-af: recover CPT engine when it gets fault
net: dsa: microchip: ksz9477: port map correction in ALU table entry register
selftests/net: toeplitz: fix race on tpacket_v3 block close
net/ulp: use consistent error code when blocking ULP
octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
tcp: avoid the lookup process failing to get sk in ehash table
Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"
MAINTAINERS: add networking entries for Willem
net: sched: gred: prevent races when adding offloads to stats
l2tp: prevent lockdep issue in l2tp_tunnel_register()
...
Stefan Assmann [Tue, 10 Jan 2023 08:00:18 +0000 (09:00 +0100)]
iavf: schedule watchdog immediately when changing primary MAC
iavf_replace_primary_mac() utilizes queue_work() to schedule the
watchdog task but that only ensures that the watchdog task is queued
to run. To make sure the watchdog is executed asap use
mod_delayed_work().
Without this patch it may take up to 2s until the watchdog task gets
executed, which may cause long delays when setting the MAC address.
Fixes: a3e839d539e0 ("iavf: Add usage of new virtchnl format to set default MAC") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Marcin Szycik [Tue, 3 Jan 2023 16:42:27 +0000 (17:42 +0100)]
iavf: Move netdev_update_features() into watchdog task
Remove netdev_update_features() from iavf_adminq_task(), as it can cause
deadlocks due to needing rtnl_lock. Instead use the
IAVF_FLAG_SETUP_NETDEV_FEATURES flag to indicate that netdev features need
to be updated in the watchdog task. iavf_set_vlan_offload_features()
and iavf_set_queue_vlan_tag_loc() can be called directly from
iavf_virtchnl_completion().
Suggested-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Michal Schmidt [Thu, 15 Dec 2022 22:50:48 +0000 (23:50 +0100)]
iavf: fix temporary deadlock and failure to set MAC address
We are seeing an issue where setting the MAC address on iavf fails with
EAGAIN after the 2.5s timeout expires in iavf_set_mac().
There is the following deadlock scenario:
iavf_set_mac(), holding rtnl_lock, waits on:
iavf_watchdog_task (within iavf_wq) to send a message to the PF,
and
iavf_adminq_task (within iavf_wq) to receive a response from the PF.
In this adapter state (>=__IAVF_DOWN), these tasks do not need to take
rtnl_lock, but iavf_wq is a global single-threaded workqueue, so they
may get stuck waiting for another adapter's iavf_watchdog_task to run
iavf_init_config_adapter(), which does take rtnl_lock.
The deadlock resolves itself by the timeout in iavf_set_mac(),
which results in EAGAIN returned to userspace.
Let's break the deadlock loop by changing iavf_wq into a per-adapter
workqueue, so that one adapter's tasks are not blocked by another's.
Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Co-developed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
David Morley [Thu, 19 Jan 2023 19:00:28 +0000 (19:00 +0000)]
tcp: fix rate_app_limited to default to 1
The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.
Fixes: eb8329e0a04d ("tcp: export data delivery rate") Suggested-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David Morley <morleyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Tested-by: David Morley <morleyd@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Wed, 18 Jan 2023 20:35:01 +0000 (12:35 -0800)]
bnxt: Do not read past the end of test names
Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:
detected buffer overflow in strnlen
[...]
Call Trace:
bnxt_ethtool_init.cold+0x18/0x18
Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls.
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/ Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.") Cc: Michael Chan <michael.chan@broadcom.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Halaney [Wed, 18 Jan 2023 16:56:38 +0000 (10:56 -0600)]
net: stmmac: enable all safety features by default
In the original implementation of dwmac5
commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.
Fixes: 5ac712dcdfef ("net: stmmac: enable platform specific safety features") Reported-by: Ning Cai <ncai@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Jan 2023 09:00:08 +0000 (09:00 +0000)]
Merge branch 'octeontx2-af-CPT'
Srujana Challa says:
====================
octeontx2-af: Miscellaneous changes for CPT
This patchset consists of miscellaneous changes for CPT.
- Adds a new mailbox to reset the requested CPT LF.
- Modify FLR sequence as per HW team suggested.
- Adds support to recover CPT engines when they gets fault.
- Updates CPT inbound inline IPsec configuration mailbox,
as per new generation of the OcteonTX2 chips.
- Adds a new mailbox to return CPT FLT Interrupt info.
---
v2:
- Addressed a review comment.
v1:
- Dropped patch "octeontx2-af: Fix interrupt name strings completely"
to submit to net.
---
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa [Wed, 18 Jan 2023 12:03:54 +0000 (17:33 +0530)]
octeontx2-af: add mbox to return CPT_AF_FLT_INT info
CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa [Wed, 18 Jan 2023 12:03:53 +0000 (17:33 +0530)]
octeontx2-af: update cpt lf alloc mailbox
The CN10K CPT coprocessor contains a context processor
to accelerate updates to the IPsec security association
contexts. The context processor contains a context cache.
This patch updates CPT LF ALLOC mailbox to config ctx_ilen
requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of
initial context fetch.
Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
octeontx2-af: restore rxc conf after teardown sequence
CN10K CPT coprocessor includes a component named RXC which
is responsible for reassembly of inner IP packets. RXC has
the feature to evict oldest entries based on age/threshold.
The age/threshold is being set to minimum values to evict
all entries at the time of teardown.
This patch adds code to restore timeout and threshold config
after teardown sequence is complete as it is global config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa [Wed, 18 Jan 2023 12:03:50 +0000 (17:33 +0530)]
octeontx2-af: modify FLR sequence for CPT
On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa [Wed, 18 Jan 2023 12:03:49 +0000 (17:33 +0530)]
octeontx2-af: add mbox for CPT LF reset
On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 19 Jan 2023 23:22:28 +0000 (15:22 -0800)]
Merge tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Prevent reading into undefined memory in the expression lexer,
accounting for a trailer backslash followed by the null byte.
- Fix file mode when copying files to the build id cache, the problem
happens when the cache directory is in a different file system than
the file being cached, otherwise the mode was preserved as only a
hard link would be done to save space.
- Fix a related build-id 'perf test' entry that checked that permission
when caching PE (Portable Executable) files, used when profiling
Windows executables under wine.
- Sync the tools/ copies of kvm headers, build_bug.h, socket.h and
arm64's cputype.h with the kernel sources.
* tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test build-id: Fix test check for PE file
perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache
perf expr: Prevent normalize() from reading into undefined memory in the expression lexer
tools headers: Syncronize linux/build_bug.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools kvm headers arm64: Update KVM header from the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
Linus Torvalds [Thu, 19 Jan 2023 20:32:07 +0000 (12:32 -0800)]
Merge tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Prevent a potential deadlock when configuring kgdb console
- Fix a kernel doc warning
* tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
kernel/printk/printk.c: Fix W=1 kernel-doc warning
tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
Linus Torvalds [Thu, 19 Jan 2023 20:28:53 +0000 (12:28 -0800)]
Merge tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 build fix from Heiko Carstens:
- Workaround invalid gcc-11 out of bounds read warning caused by s390's
S390_lowcore definition. This happens only with gcc 11.1.0 and
11.2.0.
The code which causes this warning will be gone with the next merge
window. Therefore just replace the memcpy() with a for loop to get
rid of the warning.
* tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: workaround invalid gcc-11 out of bounds read warning
Linus Torvalds [Thu, 19 Jan 2023 17:54:08 +0000 (09:54 -0800)]
Merge tag 'zonefs-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- A single patch to fix sync write operations to detect and handle
errors due to external zone corruptions resulting in writes at
invalid location, from me.
* tag 'zonefs-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Detect append writes at invalid locations
net: dsa: microchip: ksz9477: port map correction in ALU table entry register
ALU table entry 2 register in KSZ9477 have bit positions reserved for
forwarding port map. This field is referred in ksz9477_fdb_del() for
clearing forward port map and alu table.
But current fdb_del refer ALU table entry 3 register for accessing forward
port map. Update ksz9477_fdb_del() to get forward port map from correct
alu table entry register.
With this bug, issue can be observed while deleting static MAC entries.
Delete any specific MAC entry using "bridge fdb del" command. This should
clear all the specified MAC entries. But it is observed that entries with
self static alone are retained.
Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across
LAN937x and KSZ series.
Willem de Bruijn [Wed, 18 Jan 2023 15:18:47 +0000 (10:18 -0500)]
selftests/net: toeplitz: fix race on tpacket_v3 block close
Avoid race between process wakeup and tpacket_v3 block timeout.
The test waits for cfg_timeout_msec for packets to arrive. Packets
arrive in tpacket_v3 rings, which pass packets ("frames") to the
process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov
msec to release a block.
Set the block timeout lower than the process waiting time, else
the process may find that no block has been released by the time it
scans the socket list. Convert to a ring of more than one, smaller,
blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB.
Paolo Abeni [Wed, 18 Jan 2023 12:24:12 +0000 (13:24 +0100)]
net/ulp: use consistent error code when blocking ULP
The referenced commit changed the error code returned by the kernel
when preventing a non-established socket from attaching the ktls
ULP. Before to such a commit, the user-space got ENOTCONN instead
of EINVAL.
The existing self-tests depend on such error code, and the change
caused a failure:
RUN global.non_established ...
tls.c:1673:non_established:Expected errno (22) == ENOTCONN (107)
non_established: Test failed at step #3
FAIL global.non_established
In the unlikely event existing applications do the same, address
the issue by restoring the prior error code in the above scenario.
Note that the only other ULP performing similar checks at init
time - smc_ulp_ops - also fails with ENOTCONN when trying to attach
the ULP to a non-established socket.
Paolo Abeni [Thu, 19 Jan 2023 14:39:37 +0000 (15:39 +0100)]
Merge tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net: mlx5: eliminate anonymous module_init & module_exit
net/mlx5: E-switch, Fix switchdev mode after devlink reload
net/mlx5e: Protect global IPsec ASO
net/mlx5e: Remove optimization which prevented update of ESN state
net/mlx5e: Set decap action based on attr for sample
net/mlx5e: QoS, Fix wrongfully setting parent_element_id on MODIFY_SCHEDULING_ELEMENT
net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT
net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk
net/mlx5e: Avoid false lock dependency warning on tc_ht even more
net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()
====================
Kevin Hao [Wed, 18 Jan 2023 07:13:00 +0000 (15:13 +0800)]
octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
The commit 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura
free") uses the get/put_cpu() to protect the usage of percpu pointer
in ->aura_freeptr() callback, but it also unnecessarily disable the
preemption for the blockable memory allocation. The commit 87b93b678e95
("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to
fix these sleep inside atomic warnings. But it only fix the one for
the non-rt kernel. For the rt kernel, we still get the similar warnings
like below.
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by swapper/0/1:
#0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30
#1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4
#2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac
Preemption disabled at:
[<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284
CPU: 20 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc3-rt1-yocto-preempt-rt #1
Hardware name: Marvell OcteonTX CN96XX board (DT)
Call trace:
dump_backtrace.part.0+0xe8/0xf4
show_stack+0x20/0x30
dump_stack_lvl+0x9c/0xd8
dump_stack+0x18/0x34
__might_resched+0x188/0x224
rt_spin_lock+0x64/0x110
alloc_iova_fast+0x1ac/0x2ac
iommu_dma_alloc_iova+0xd4/0x110
__iommu_dma_map+0x80/0x144
iommu_dma_map_page+0xe8/0x260
dma_map_page_attrs+0xb4/0xc0
__otx2_alloc_rbuf+0x90/0x150
otx2_rq_aura_pool_init+0x1c8/0x284
otx2_init_hw_resources+0xe4/0x3a4
otx2_open+0xf0/0x610
__dev_open+0x104/0x224
__dev_change_flags+0x1e4/0x274
dev_change_flags+0x2c/0x7c
ic_open_devs+0x124/0x2f8
ip_auto_config+0x180/0x42c
do_one_initcall+0x90/0x4dc
do_basic_setup+0x10c/0x14c
kernel_init_freeable+0x10c/0x13c
kernel_init+0x2c/0x140
ret_from_fork+0x10/0x20
Of course, we can shuffle the get/put_cpu() to only wrap the invocation
of ->aura_freeptr() as what commit 87b93b678e95 does. But there are only
two ->aura_freeptr() callbacks, otx2_aura_freeptr() and
cn10k_aura_freeptr(). There is no usage of perpcu variable in the
otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it.
We can move the get/put_cpu() into the corresponding callback which
really has the percpu variable usage and avoid the sprinkling of
get/put_cpu() in several places.
Jason Xing [Wed, 18 Jan 2023 01:59:41 +0000 (09:59 +0800)]
tcp: avoid the lookup process failing to get sk in ehash table
While one cpu is working on looking up the right socket from ehash
table, another cpu is done deleting the request socket and is about
to add (or is adding) the big socket from the table. It means that
we could miss both of them, even though it has little chance.
Let me draw a call trace map of the server side.
CPU 0 CPU 1
----- -----
tcp_v4_rcv() syn_recv_sock()
inet_ehash_insert()
-> sk_nulls_del_node_init_rcu(osk)
__inet_lookup_established()
-> __sk_nulls_add_node_rcu(sk, list)
Notice that the CPU 0 is receiving the data after the final ack
during 3-way shakehands and CPU 1 is still handling the final ack.
Why could this be a real problem?
This case is happening only when the final ack and the first data
receiving by different CPUs. Then the server receiving data with
ACK flag tries to search one proper established socket from ehash
table, but apparently it fails as my map shows above. After that,
the server fetches a listener socket and then sends a RST because
it finds a ACK flag in the skb (data), which obeys RST definition
in RFC 793.
Besides, Eric pointed out there's one more race condition where it
handles tw socket hashdance. Only by adding to the tail of the list
before deleting the old one can we avoid the race if the reader has
already begun the bucket traversal and it would possibly miss the head.
Many thanks to Eric for great help from beginning to end.
Currently IFF_NO_ADDRCONF is used to prevent all ipv6 addrconf for the
slave ports of team, bonding and failover devices and it means no ipv6
packets can be sent out through these slave ports. However, for team
device, "nsna_ping" link_watch requires ipv6 addrconf. Otherwise, the
link will be marked failure. This patch removes the IFF_NO_ADDRCONF
flag set for team port, and we will fix the original issue in another
patch, as Jakub suggested.
Jakub Kicinski [Tue, 17 Jan 2023 19:01:41 +0000 (11:01 -0800)]
MAINTAINERS: add networking entries for Willem
We often have to ping Willem asking for reviews of patches
because he doesn't get included in the CC list. Add MAINTAINERS
entries for some of the areas he covers so that ./scripts/ will
know to add him.
Jakub Kicinski [Fri, 13 Jan 2023 04:41:37 +0000 (20:41 -0800)]
net: sched: gred: prevent races when adding offloads to stats
Naresh reports seeing a warning that gred is calling
u64_stats_update_begin() with preemption enabled.
Arnd points out it's coming from _bstats_update().
We should be holding the qdisc lock when writing
to stats, they are also updated from the datapath.
Jakub Kicinski [Thu, 19 Jan 2023 04:10:31 +0000 (20:10 -0800)]
Merge tag 'wireless-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.2
Third set of fixes for v6.2. This time most of them are for drivers,
only one revert for mac80211. For an important mt76 fix we had to
cherry pick two commits from wireless-next.
* tag 'wireless-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "wifi: mac80211: fix memory leak in ieee80211_if_add()"
wifi: mt76: dma: fix a regression in adding rx buffers
wifi: mt76: handle possible mt76_rx_token_consume failures
wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oid
wifi: brcmfmac: fix regression for Broadcom PCIe wifi devices
wifi: brcmfmac: avoid NULL-deref in survey dump for 2G only device
wifi: brcmfmac: avoid handling disabled channels for survey dump
====================
Linus Torvalds [Wed, 18 Jan 2023 17:50:23 +0000 (09:50 -0800)]
Merge tag 'erofs-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Two patches fixes issues reported by syzbot, one fixes a missing
`domain_id` mount option in documentation and a minor cleanup:
- Fix wrong iomap->length calculation post EOF, which could cause a
WARN_ON in iomap_iter_done() (Siddh)
- Fix improper kvcalloc() use with __GFP_NOFAIL (me)
- Add missing `domain_id` mount option in documentation (Jingbo)
- Clean up fscache option parsing (Jingbo)"
* tag 'erofs-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clean up parsing of fscache related options
erofs: add documentation for 'domain_id' mount option
erofs: fix kvcalloc() misuse with __GFP_NOFAIL
erofs/zmap.c: Fix incorrect offset calculation
Linus Torvalds [Wed, 18 Jan 2023 17:32:54 +0000 (09:32 -0800)]
Merge tag 'loongarch-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix a missing elf_hwcap, fix some stack unwinder bugs and two trivial
cleanups"
* tag 'loongarch-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Add generic ex-handler unwind in prologue unwinder
LoongArch: Strip guess unwinder out from prologue unwinder
LoongArch: Use correct sp value to get graph addr in stack unwinders
LoongArch: Get frame info in unwind_start() when regs is not available
LoongArch: Adjust PC value when unwind next frame in unwinder
LoongArch: Simplify larch_insn_gen_xxx implementation
LoongArch: Use common function sign_extend64()
LoongArch: Add HWCAP_LOONGARCH_CPUCFG to elf_hwcap
Pietro Borrello [Wed, 11 Jan 2023 18:12:16 +0000 (18:12 +0000)]
HID: betop: check shape of output reports
betopff_init() only checks the total sum of the report counts for each
report field to be at least 4, but hid_betopff_play() expects 4 report
fields.
A device advertising an output report with one field and 4 report counts
would pass the check but crash the kernel with a NULL pointer dereference
in hid_betopff_play().
Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()") Reported-by: syzbot+bbd35b345c7cab0d9a08@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/netdev/20230114030137.672706-1-xiyou.wangcong@gmail.com/T/#m1164ff20628671b0f326a24cb106ab3239c70ce3 Cc: Cong Wang <cong.wang@bytedance.com> Cc: Guillaume Nault <gnault@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Tue, 17 Jan 2023 03:47:07 +0000 (11:47 +0800)]
virtio-net: correctly enable callback during start_xmit
Commit a7766ef18b33("virtio_net: disable cb aggressively") enables
virtqueue callback via the following statement:
do {
if (use_napi)
virtqueue_disable_cb(sq->vq);
free_old_xmit_skbs(sq, false);
} while (use_napi && kick &&
unlikely(!virtqueue_enable_cb_delayed(sq->vq)));
When NAPI is used and kick is false, the callback won't be enabled
here. And when the virtqueue is about to be full, the tx will be
disabled, but we still don't enable tx interrupt which will cause a TX
hang. This could be observed when using pktgen with burst enabled.
TO be consistent with the logic that tries to disable cb only for
NAPI, fixing this by trying to enable delayed callback only when NAPI
is enabled when the queue is about to be full.
Fixes: a7766ef18b33 ("virtio_net: disable cb aggressively") Signed-off-by: Jason Wang <jasowang@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Mon, 16 Jan 2023 21:41:33 +0000 (15:41 -0600)]
net: macb: fix PTP TX timestamp failure due to packet padding
PTP TX timestamp handling was observed to be broken with this driver
when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving
the expected TX timestamp after transmitting a packet, causing it to
enter a failure state.
The problem appears to be due to the way that the driver pads packets
which are smaller than the Ethernet minimum of 60 bytes. If headroom
space was available in the SKB, this caused the driver to move the data
back to utilize it. However, this appears to cause other data references
in the SKB to become inconsistent. In particular, this caused the
ptp_one_step_sync function to later (in the TX completion path) falsely
detect the packet as a one-step SYNC packet, even when it was not, which
caused the TX timestamp to not be processed when it should be.
Using the headroom for this purpose seems like an unnecessary complexity
as this is not a hot path in the driver, and in most cases it appears
that there is sufficient tailroom to not require using the headroom
anyway. Remove this usage of headroom to prevent this inconsistency from
occurring and causing other problems.
Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5 Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The option "--buildid-dir" sets the build id cache directory as
/tmp/perf.debug.TeY1. The option given to buildid-cahe, ie "-a
./tests/shell/../pe-file.exe", is to add the pe-file.exe to the cache.
The testcase, sets buildid-dir and adds the file: pe-file.exe to build
id cache. To check if the command is run successfully, "check" function
looks for presence of the file in buildid cache directory. But the check
here expects the added file to be executable. Snippet below:
<<>>
if [ ! -x $file ]; then
echo "failed: file ${file} does not exist"
exit 1
fi
<<>>
The buildid test is done for sha1 binary, md5 binary and also for PE
file. The first two binaries are created at runtime by compiling with
"--build-id" option and hence the check for sha1/md5 test should use [ !
-x ]. But in case of PE file, the permission for this input file is
rw-r--r-- Hence the file added to build id cache has same permissoin
Original file:
ls tests/pe-file.exe | xargs stat --printf "%n %A \n"
tests/pe-file.exe -rw-r--r--
buildid cache file:
ls /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf | xargs stat --printf "%n %A \n"
/tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf -rw-r--r--
Fix the test to match with the permission of original file in case of FE
file. ie if the "tests/pe-file.exe" file is not having exec permission,
just check for existence of the buildid file using [ ! -e <file> ]
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230116050131.17221-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The above will create ".build-id" folder in build id directory, which is
/tmp/perf.debug.TeY1. Also adds file to this folder under build id.
Example:
# ls -ltr /tmp/perf.debug.TeY1/.build-id/5a/0fd882b53084224ba47b624c55a469/
total 76
-rw-r--r--. 1 root root 0 Jan 11 00:38 probes
-rwxr-xr-x. 1 root root 75595 Jan 11 00:38 elf
We can see in the results that file mode for original file and file in
build id directory is different. ie, build id file has executable
permission whereas original file doesn’t have.
The code path and function (build_id_cache__add to add a file to the
cache is in "util/build-id.c". In build_id_cache__add() function, it
first attempts to link the original file to destination cache folder.
If linking the file fails (which can happen if the destination and
source is on a different mount points), it will copy the file to
destination. Here copyfile() routine explicitly uses mode as "755" and
hence file in the destination will have executable permission.
Code snippet:
if (link(realname, filename) && errno != EEXIST && copyfile(name, filename))
Whereas if the link succeeds, it succeeds in the first attempt itself
and the file in the build-id dir will have same permission as original
file.
Example, above uses /tmp. Instead if we use "--buildid-dir /home/build",
linking will work here since mount points are same. Hence the
destination file will not have executable permission.
Since the testcase "tests/shell/buildid.sh" always looks for executable
file, test fails in powerpc environment when test is run from /root.
The patch adds a change in build_id_cache__add() to use copyfile_mode()
which also passes the file’s original mode as argument. This way the
destination file mode also will be same as original file.
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230116050131.17221-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sohom Datta [Sun, 4 Dec 2022 10:58:35 +0000 (16:28 +0530)]
perf expr: Prevent normalize() from reading into undefined memory in the expression lexer
The current implementation does not account for a trailing backslash
followed by a null-byte.
If a null-byte is encountered following a backslash, normalize() will
continue reading (and potentially writing) into garbage memory ignoring
the EOS null-byte.
Signed-off-by: Sohom Datta <sohomdatta1+git@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221204105836.1012885-1-sohomdatta1+git@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This cset only introduces a build time assert macro, that may be useful
at some point for tooling, for now it silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/linux/build_bug.h' differs from latest version at 'include/linux/build_bug.h'
diff -u tools/include/linux/build_bug.h include/linux/build_bug.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Maxim Levitsky <mlevitsk@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/Y8f0jqQFYDAOBkHx@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in:
b5f0de6df6dce8d6 ("net: dev: Convert sa_data to flexible array in struct sockaddr")
That don't result in any changes in the tables generated from that
header.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers arm64: Sync arm64's cputype.h with the kernel sources
To get the changes in:
decb17aeb8fa2148 ("KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations") 07e39e60bbf0ccd5 ("arm64: Add Cortex-715 CPU part definition") 8ec8490a1950efec ("arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro")
That addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h'
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Ali Saidi <alisaidi@amazon.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: D Scott Phillips <scott@os.amperecomputing.com> Cc: German Gomez <german.gomez@arm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/Y8fvEGCGn+227qW0@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That doesn't result in any changes in tooling (built on a Libre Computer
Firefly ROC-RK3399-PC-V1.1-A running Ubuntu 22.04), only addresses this
perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/Y8fmIT5PIfGaZuwa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make sure calibration values are defined to prevent potential kernel
crashes. This fixes a hypothetical issue for virtual or clone devices
inspired by a similar fix for DS4.
Some DualShock4 devices report invalid calibration data resulting
in kernel oopses due to division by zero during report handling.
The devices affected generally appear to be clone devices, which don't
implement all reports properly and don't populate proper calibration
data. The issue may have been seen on an official device with erased
calibration reports.
This patch prevents the crashes by essentially disabling calibration
when invalid values are detected.
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
Chris Mi [Wed, 21 Dec 2022 09:14:37 +0000 (11:14 +0200)]
net/mlx5: E-switch, Fix switchdev mode after devlink reload
The cited commit removes eswitch mode none. So after devlink reload
in switchdev mode, eswitch mode is not changed. But actually eswitch
is disabled during devlink reload.
Fix it by setting eswitch mode to legacy when disabling eswitch
which is called by reload_down.
Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Leon Romanovsky [Mon, 9 Jan 2023 08:34:25 +0000 (10:34 +0200)]
net/mlx5e: Protect global IPsec ASO
ASO operations are global to whole IPsec as they share one DMA address
for all operations. As such all WQE operations need to be protected with
lock. In this case, it must be spinlock to allow mlx5e_ipsec_aso_query()
operate in atomic context.
Fixes: 1ed78fc03307 ("net/mlx5e: Update IPsec soft and hard limits") Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Leon Romanovsky [Mon, 9 Jan 2023 08:43:13 +0000 (10:43 +0200)]
net/mlx5e: Remove optimization which prevented update of ESN state
aso->use_cache variable introduced in commit 8c582ddfbb47 ("net/mlx5e: Handle
hardware IPsec limits events") was an optimization to skip recurrent calls
to mlx5e_ipsec_aso_query(). Such calls are possible when lifetime event is
generated:
-> mlx5e_ipsec_handle_event()
-> mlx5e_ipsec_aso_query() - first call
-> xfrm_state_check_expire()
-> mlx5e_xfrm_update_curlft()
-> mlx5e_ipsec_aso_query() - second call
However, such optimization not really effective as mlx5e_ipsec_aso_query()
is needed to be called for update ESN anyway, which was missed due to misplaced
use_cache assignment.
Fixes: cee137a63431 ("net/mlx5e: Handle ESN update events") Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Thu, 12 Jan 2023 02:30:27 +0000 (04:30 +0200)]
net/mlx5e: Set decap action based on attr for sample
Currently decap action is set based on tunnel_id. That means it is
set unconditionally. But for decap, ct and sample actions, decap is
done before ct. No need to decap again in sample.
And the actions are set correctly when parsing. So set decap action
based on attr instead of tunnel_id.
Fixes: 2741f2230905 ("net/mlx5e: TC, Support sample offload action for tunneled traffic") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Tue, 27 Dec 2022 08:22:41 +0000 (10:22 +0200)]
net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT
According to HW spec element_type, element_attributes and parent_element_id fields
should be reserved (0x0) when calling MODIFY_SCHEDULING_ELEMENT command.
This patch remove initialization of these fields when calling the command.
Adham Faris [Thu, 12 Jan 2023 09:15:00 +0000 (11:15 +0200)]
net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk
This validation function is relevant only for XSK cases, hence it
assumes to be called only with xsk != NULL.
Thus checking for invalid xsk pointer is redundant and misleads static
code analyzers.
This commit removes redundant xsk pointer check.
This solves the following smatch warning:
drivers/net/ethernet/mellanox/mlx5/core/en/params.c:481
mlx5e_mpwrq_validate_xsk() error: we previously assumed 'xsk' could be
null (see line 478)
Fixes: 6470d2e7e8ed ("net/mlx5e: xsk: Use KSM for unaligned XSK") Signed-off-by: Adham Faris <afaris@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Thu, 15 Dec 2022 15:44:33 +0000 (16:44 +0100)]
net/mlx5e: Avoid false lock dependency warning on tc_ht even more
The cited commit changed class of tc_ht internal mutex in order to avoid
false lock dependency with fs_core node and flow_table hash table
structures. However, hash table implementation internally also includes a
workqueue task with its own lockdep map which causes similar bogus lockdep
splat[0]. Fix it by also adding dedicated class for hash table workqueue
work structure of tc_ht.
[0]:
[ 1139.672465] ======================================================
[ 1139.673552] WARNING: possible circular locking dependency detected
[ 1139.674635] 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 Not tainted
[ 1139.675734] ------------------------------------------------------
[ 1139.676801] modprobe/5998 is trying to acquire lock:
[ 1139.677726] ffff88811e7b93b8 (&node->lock){++++}-{3:3}, at: down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.679662]
but task is already holding lock:
[ 1139.680703] ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0
[ 1139.682223]
which lock already depends on the new lock.
Jakub Kicinski [Wed, 18 Jan 2023 03:19:00 +0000 (19:19 -0800)]
Merge tag 'for-net-2023-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix a buffer overflow in mgmt_mesh_add
- Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2
- Fix hci_qca shutdown on closed serdev
- Fix possible circular locking dependencies on ISO code
- Fix possible deadlock in rfcomm_sk_state_change
* tag 'for-net-2023-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix possible deadlock in rfcomm_sk_state_change
Bluetooth: ISO: Fix possible circular locking dependency
Bluetooth: hci_event: Fix Invalid wait context
Bluetooth: ISO: Fix possible circular locking dependency
Bluetooth: hci_sync: fix memory leak in hci_update_adv_data()
Bluetooth: hci_qca: Fix driver shutdown on closed serdev
Bluetooth: hci_conn: Fix memory leaks
Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2
Bluetooth: Fix a buffer overflow in mgmt_mesh_add()
====================
Jakub Kicinski [Wed, 18 Jan 2023 03:13:02 +0000 (19:13 -0800)]
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2023-01-16
We've added 6 non-merge commits during the last 8 day(s) which contain
a total of 6 files changed, 22 insertions(+), 24 deletions(-).
The main changes are:
1) Mitigate a Spectre v4 leak in unprivileged BPF from speculative
pointer-as-scalar type confusion, from Luis Gerhorst.
2) Fix a splat when pid 1 attaches a BPF program that attempts to
send killing signal to itself, from Hao Sun.
3) Fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events, from Paul Moore.
4) Fix BPF verifier warning triggered from invalid kfunc call in
backtrack_insn, also from Hao Sun.
5) Fix potential deadlock in htab_lock_bucket from same bucket index
but different map_locked index, from Tonghao Zhang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation
bpf: hash map, avoid deadlock with suitable hash mask
bpf: remove the do_idr_lock parameter from bpf_prog_free_id()
bpf: restore the ebpf program ID for BPF_AUDIT_UNLOAD and PERF_BPF_EVENT_PROG_UNLOAD
bpf: Skip task with pid=1 in send_signal_common()
bpf: Skip invalid kfunc call in backtrack_insn
====================
Caleb Connolly [Sun, 15 Jan 2023 17:59:24 +0000 (17:59 +0000)]
net: ipa: disable ipa interrupt during suspend
The IPA interrupt can fire when pm_runtime is disabled due to it racing
with the PM suspend/resume code. This causes a splat in the interrupt
handler when it tries to call pm_runtime_get().
Explicitly disable the interrupt in our ->suspend callback, and
re-enable it in ->resume to avoid this. If there is an interrupt pending
it will be handled after resuming. The interrupt is a wake_irq, as a
result even when disabled if it fires it will cause the system to wake
from suspend as well as cancel any suspend transition that may be in
progress. If there is an interrupt pending, the ipa_isr_thread handler
will be called after resuming.
Ying Hsu [Wed, 11 Jan 2023 03:16:14 +0000 (03:16 +0000)]
Bluetooth: Fix possible deadlock in rfcomm_sk_state_change
syzbot reports a possible deadlock in rfcomm_sk_state_change [1].
While rfcomm_sock_connect acquires the sk lock and waits for
the rfcomm lock, rfcomm_sock_release could have the rfcomm
lock and hit a deadlock for acquiring the sk lock.
Here's a simplified flow:
This patch drops the sk lock before calling rfcomm_dlc_open to
avoid the possible deadlock and holds sk's reference count to
prevent use-after-free after rfcomm_dlc_open completes.
Reported-by: syzbot+d7ce59...@syzkaller.appspotmail.com Fixes: 1804fdf6e494 ("Bluetooth: btintel: Combine setting up MSFT extension") Link: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218 Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
projects / mirror_ubuntu-kernels.git / log