should_skip_kasan_poison() reads the PG_skip_kasan_poison flag from
page->flags. However, this line of code in free_pages_prepare():
page->flags &= ~PAGE_FLAGS_CHECK_AT_PREP;
clears most of page->flags, including PG_skip_kasan_poison, before calling
should_skip_kasan_poison(), which meant that it would never return true as
a result of the page flag being set. Therefore, fix the code to call
should_skip_kasan_poison() before clearing the flags, as we were doing
before the reverted patch.
This fixes a measurable performance regression introduced in the reverted
commit, where munmap() takes longer than intended if HW tags KASAN is
supported and enabled at runtime. Without this patch, we see a
single-digit percentage performance regression in a particular
mmap()-heavy benchmark when enabling HW tags KASAN, and with the patch,
there is no statistically significant performance impact when enabling HW
tags KASAN.
Link: https://lkml.kernel.org/r/20230310042914.3805818-2-pcc@google.com Fixes: 487a32ec24be ("kasan: drop skip_kasan_poison variable in free_pages_prepare") Link: https://linux-review.googlesource.com/id/Ic4f13affeebd20548758438bb9ed9ca40e312b79 Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Evgenii Stepanov <eugenis@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.1] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Marco Elver [Mon, 27 Feb 2023 09:47:27 +0000 (10:47 +0100)]
kasan, powerpc: don't rename memintrinsics if compiler adds prefixes
With appropriate compiler support [1], KASAN builds use __asan prefixed
meminstrinsics, and KASAN no longer overrides memcpy/memset/memmove.
If compiler support is detected (CC_HAS_KASAN_MEMINTRINSIC_PREFIX), define
memintrinsics normally (do not prefix '__').
On powerpc, KASAN is the only user of __mem functions, which are used to
define instrumented memintrinsics. Alias the normal versions for KASAN to
use in its implementation.
Liam R. Howlett [Wed, 8 Mar 2023 22:03:10 +0000 (17:03 -0500)]
mm/ksm: fix race with VMA iteration and mm_struct teardown
exit_mmap() will tear down the VMAs and maple tree with the mmap_lock held
in write mode. Ensure that the maple tree is still valid by checking
ksm_test_exit() after taking the mmap_lock in read mode, but before the
for_each_vma() iterator dereferences a destroyed maple tree.
Since the maple tree is destroyed, the flags telling lockdep to check an
external lock has been cleared. Skip the for_each_vma() iterator to avoid
dereferencing a maple tree without the external lock flag, which would
create a lockdep warning.
Joey Gouly [Wed, 8 Mar 2023 19:04:20 +0000 (19:04 +0000)]
mm: deduplicate error handling for map_deny_write_exec
Patch series "Fixes for MDWE prctl"
These are four small fixes for the recent memory-write-deny-execute prctl
patches [1]. Two reported by Alexey about error handling and two tooling
fixes by Peter.
This patch (of 4):
Commit cc8d1b097de7 ("mmap: clean up mmap_region() unrolling")
deduplicated the error handling, do the same for the return value of
`map_deny_write_exec`.
Tiezhu Yang [Tue, 7 Mar 2023 07:59:00 +0000 (15:59 +0800)]
checksyscalls: ignore fstat to silence build warning on LoongArch
fstat is replaced by statx on the new architecture, so an exception is
added to the checksyscalls script to silence the following build warning
on LoongArch:
CALL scripts/checksyscalls.sh
<stdin>:569:2: warning: #warning syscall fstat not implemented [-Wcpp]
Link: https://lkml.kernel.org/r/1678175940-20872-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Suggested-by: WANG Xuerui <kernel@xen0n.name> Suggested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Tue, 7 Mar 2023 08:55:48 +0000 (17:55 +0900)]
nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()
The ioctl helper function nilfs_ioctl_wrap_copy(), which exchanges a
metadata array to/from user space, may copy uninitialized buffer regions
to user space memory for read-only ioctl commands NILFS_IOCTL_GET_SUINFO
and NILFS_IOCTL_GET_CPINFO.
This can occur when the element size of the user space metadata given by
the v_size member of the argument nilfs_argv structure is larger than the
size of the metadata element (nilfs_suinfo structure or nilfs_cpinfo
structure) on the file system side.
KMSAN-enabled kernels detect this issue as follows:
Liam R. Howlett [Tue, 7 Mar 2023 18:02:47 +0000 (13:02 -0500)]
test_maple_tree: add more testing for mas_empty_area()
Test robust filling of an entire area of the tree, then test one beyond.
This is to test the walking back up the tree at the end of nodes and error
condition. Test inspired by the reproducer code provided by Snild Dolkow.
The last test in the function tests for the case of a corrupted maple
state caused by the incorrect limits set during mas_skip_node(). There
needs to be a gap in the second last child and last child, but the search
must rule out the second last child's gap. This would avoid correcting
the maple state to the correct max limit and return an error.
Liam R. Howlett [Tue, 7 Mar 2023 18:02:46 +0000 (13:02 -0500)]
maple_tree: fix mas_skip_node() end slot detection
Patch series "Fix mas_skip_node() for mas_empty_area()", v2.
mas_empty_area() was incorrectly returning an error when there was room.
The issue was tracked down to mas_skip_node() using the incorrect
end-of-slot count. Instead of using the nodes hard limit, the limit of
data should be used.
mas_skip_node() was also setting the min and max to that of the child
node, which was unnecessary. Within these limits being set, there was
also a bug that corrupted the maple state's max if the offset was set to
the maximum node pivot. The bug was without consequence unless there was
a sufficient gap in the next child node which would cause an error to be
returned.
This patch set fixes these errors by removing the limit setting from
mas_skip_node() and uses the mas_data_end() for slot limits, and adds
tests for all failures discovered.
This patch (of 2):
mas_skip_node() is used to move the maple state to the node with a higher
limit. It does this by walking up the tree and increasing the slot count.
Since slot count may not be able to be increased, it may need to walk up
multiple times to find room to walk right to a higher limit node. The
limit of slots that was being used was the node limit and not the last
location of data in the node. This would cause the maple state to be
shifted outside actual data and enter an error state, thus returning
-EBUSY.
The result of the incorrect error state means that mas_awalk() would
return an error instead of finding the allocation space.
The fix is to use mas_data_end() in mas_skip_node() to detect the nodes
data end point and continue walking the tree up until it is safe to move
to a node with a higher limit.
The walk up the tree also sets the maple state limits so remove the buggy
code from mas_skip_node(). Setting the limits had the unfortunate side
effect of triggering another bug if the parent node was full and the there
was no suitable gap in the second last child, but room in the next child.
mas_skip_node() may also be passed a maple state in an error state from
mas_anode_descend() when no allocations are available. Return on such an
error state immediately.
it seems that I have completely missed high order allocation backing
vmalloc areas case when implementing __GFP_NOFAIL support. This means
that [k]vmalloc at al. can allocate higher order allocations with
__GFP_NOFAIL which can trigger OOM killer for non-costly orders easily or
cause a lot of reclaim/compaction activity if those requests cannot be
satisfied.
Fix the issue by falling back to zero order allocations for __GFP_NOFAIL
requests if the high order request fails.
Link: https://lkml.kernel.org/r/ZAXynvdNqcI0f6Us@dhcp22.suse.cz Fixes: 9376130c390a ("mm/vmalloc: add support for __GFP_NOFAIL") Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lkml.kernel.org/r/20230305053035.1911-1-hsiangkao@linux.alibaba.com Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Baoquan He <bhe@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Thu, 23 Mar 2023 22:25:49 +0000 (15:25 -0700)]
Merge tag 'gfs2-v6.3-rc3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
- Reinstate commit 970343cd4904 ("GFS2: free disk inode which is
deleted by remote node -V2") as reverting that commit could cause
gfs2_put_super() to hang.
* tag 'gfs2-v6.3-rc3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Reinstate "GFS2: free disk inode which is deleted by remote node -V2"
Bob Peterson [Thu, 23 Mar 2023 16:26:02 +0000 (12:26 -0400)]
Reinstate "GFS2: free disk inode which is deleted by remote node -V2"
It turns out that reverting commit 970343cd4904 ("GFS2: free disk inode
which is deleted by remote node -V2") causes a regression related to
evicting inodes that were unlinked on a different cluster node.
We could also have simply added a call to d_mark_dontcache() to function
gfs2_try_evict(), but the original pre-revert code is better tested and
proven.
Linus Torvalds [Thu, 23 Mar 2023 18:05:08 +0000 (11:05 -0700)]
Merge tag 'zonefs-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Silence a false positive smatch warning about an uninitialized
variable
- Fix an error message to provide more useful information about invalid
zone append write results
* tag 'zonefs-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Fix error message in zonefs_file_dio_append()
zonefs: Prevent uninitialized symbol 'size' warning
Linus Torvalds [Wed, 22 Mar 2023 21:09:20 +0000 (14:09 -0700)]
Merge tag 'bootconfig-fixes-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- Fix bootconfig test script to test increased maximum number (8192)
node correctly
- Change the console message if there is no bootconfig data and the
kernel is compiled with CONFIG_BOOT_CONFIG_FORCE=y
* tag 'bootconfig-fixes-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Change message if no bootconfig with CONFIG_BOOT_CONFIG_FORCE=y
bootconfig: Fix testcase to increase max node
bootconfig: Change message if no bootconfig with CONFIG_BOOT_CONFIG_FORCE=y
Change no bootconfig data error message if user do not specify 'bootconfig'
option but CONFIG_BOOT_CONFIG_FORCE=y.
With CONFIG_BOOT_CONFIG_FORCE=y, the kernel proceeds bootconfig check even
if user does not specify 'bootconfig' option. So the current error message
is confusing. Let's show just an information message to notice skipping
the bootconfig in that case.
Linus Torvalds [Tue, 21 Mar 2023 21:48:38 +0000 (14:48 -0700)]
Merge tag 'nfsd-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a crash during NFS READs from certain client implementations
- Address a minor kbuild regression in v6.3
* tag 'nfsd-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't replace page in rq_pages if it's a continuation of last page
NFS & NFSD: Update GSS dependencies
Linus Torvalds [Tue, 21 Mar 2023 18:38:58 +0000 (11:38 -0700)]
Merge tag 'keys-fixes-20230321' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyrings fixes from David Howells:
- Fix request_key() so that it doesn't cache a looked up key on the
current thread if that thread is a kernel thread.
The cache is cleared during notify_resume - but that doesn't happen
in kernel threads. This is causing cifs DNS keys to be
un-invalidateable.
- Fix a wrapper check in verify_pefile() to not round up the length.
- Change asymmetric_keys code to log errors to make it easier for users
to work out why failures occurred.
* tag 'keys-fixes-20230321' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
asymmetric_keys: log on fatal failures in PE/pkcs7
verify_pefile: relax wrapper length check
keys: Do not cache key in task struct if key is requested from kernel thread
Robbie Harwood [Mon, 20 Feb 2023 17:12:54 +0000 (12:12 -0500)]
asymmetric_keys: log on fatal failures in PE/pkcs7
These particular errors can be encountered while trying to kexec when
secureboot lockdown is in place. Without this change, even with a
signed debug build, one still needs to reboot the machine to add the
appropriate dyndbg parameters (since lockdown blocks debugfs).
Accordingly, upgrade all pr_debug() before fatal error into pr_warn().
Signed-off-by: Robbie Harwood <rharwood@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: Eric Biederman <ebiederm@xmission.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org Link: https://lore.kernel.org/r/20230220171254.592347-3-rharwood@redhat.com/
Robbie Harwood [Mon, 20 Feb 2023 17:12:53 +0000 (12:12 -0500)]
verify_pefile: relax wrapper length check
The PE Format Specification (section "The Attribute Certificate Table
(Image Only)") states that `dwLength` is to be rounded up to 8-byte
alignment when used for traversal. Therefore, the field is not required
to be an 8-byte multiple in the first place.
Accordingly, pesign has not performed this alignment since version
0.110. This causes kexec failure on pesign'd binaries with "PEFILE:
Signature wrapper len wrong". Update the comment and relax the check.
David Howells [Tue, 14 Mar 2023 15:15:18 +0000 (15:15 +0000)]
keys: Do not cache key in task struct if key is requested from kernel thread
The key which gets cached in task structure from a kernel thread does not
get invalidated even after expiry. Due to which, a new key request from
kernel thread will be served with the cached key if it's present in task
struct irrespective of the key validity. The change is to not cache key in
task_struct when key requested from kernel thread so that kernel thread
gets a valid key on every key request.
The problem has been seen with the cifs module doing DNS lookups from a
kernel thread and the results getting pinned by being attached to that
kernel thread's cache - and thus not something that can be easily got rid
of. The cache would ordinarily be cleared by notify-resume, but kernel
threads don't do that.
This isn't seen with AFS because AFS is doing request_key() within the
kernel half of a user thread - which will do notify-resume.
Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct") Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Steve French <smfrench@gmail.com>
cc: keyrings@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/CAGypqWw951d=zYRbdgNR4snUDvJhWL=q3=WOyh7HhSJupjz2vA@mail.gmail.com/
Since commit 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig
from 1024 to 8192 for DCC support") increased the max number of bootconfig
node to 8192, the bootconfig testcase of the max number of nodes fails.
To fix this issue, we can not simply increase the number in the test script
because the test bootconfig file becomes too big (>32KB). To fix that, we
can use a combination of three alphabets (26^3 = 17576). But with that,
we can not express the 8193 (just one exceed from the limitation) because
it also exceeds the max size of bootconfig. So, the first 26 nodes will just
use one alphabet.
With this fix, test-bootconfig.sh passes all tests.
Linus Torvalds [Mon, 20 Mar 2023 22:20:33 +0000 (15:20 -0700)]
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fixes from Eric Biggers:
"Fix two significant performance issues with fsverity"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: don't drop pagecache at end of FS_IOC_ENABLE_VERITY
fsverity: Remove WQ_UNBOUND from fsverity read workqueue
Linus Torvalds [Mon, 20 Mar 2023 22:12:55 +0000 (15:12 -0700)]
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt fix from Eric Biggers:
"Fix a bug where when a filesystem was being unmounted, the fscrypt
keyring was destroyed before inodes have been released by the Landlock
LSM.
This bug was found by syzbot"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: check for NULL keyring in fscrypt_put_master_key_activeref()
fscrypt: improve fscrypt_destroy_keyring() documentation
fscrypt: destroy keyring after security_sb_delete()
Damien Le Moal [Mon, 20 Mar 2023 13:49:15 +0000 (22:49 +0900)]
zonefs: Fix error message in zonefs_file_dio_append()
Since the expected write location in a sequential file is always at the
end of the file (append write), when an invalid write append location is
detected in zonefs_file_dio_append(), print the invalid written location
instead of the expected write location.
Fixes: a608da3bd730 ("zonefs: Detect append writes at invalid locations") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Damien Le Moal [Mon, 20 Mar 2023 06:35:06 +0000 (15:35 +0900)]
zonefs: Prevent uninitialized symbol 'size' warning
In zonefs_file_dio_append(), initialize the variable size to 0 to
prevent compilation and static code analizers warning such as:
New smatch warnings:
fs/zonefs/file.c:441 zonefs_file_dio_append() error: uninitialized
symbol 'size'.
The warning is a false positive as size is never actually used
uninitialized.
No functional change.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202303191227.GL8Dprbi-lkp@intel.com/ Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Linus Torvalds [Mon, 20 Mar 2023 17:52:10 +0000 (10:52 -0700)]
Merge tag 'nfs-for-6.3-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Fix /proc/PID/io read_bytes accounting
- Fix setting NLM file_lock start and end during decoding testargs
- Fix timing for setting access cache timestamps
* tag 'nfs-for-6.3-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Correct timing for assigning access cache timestamp
lockd: set file_lock start and end when decoding nlm4 testargs
NFS: Fix /proc/PID/io read_bytes for buffered reads
Linus Torvalds [Sun, 19 Mar 2023 17:46:02 +0000 (10:46 -0700)]
Merge tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead
- Fix per cpu thread management of the hwlat tracer:
- Do not start per_cpu threads if one is already running for the CPU
- When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to the result
of the call from kprobe_event_delete(), which would likely succeed,
and thus have the function return success
- Fix splice() reads from the trace file that was broken by commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit
ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags for
tricks to optimize, which was shortly removed due to them being
tricks. But a comment for those tricks remained
- Set local functions and variables to static
* tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
ring-buffer: remove obsolete comment for free_buffer_page()
tracing: Make splice_read available again
ftrace: Set direct_ops storage-class-specifier to static
trace/hwlat: Do not start per-cpu thread if it is already running
trace/hwlat: Do not wipe the contents of per-cpu thread data
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
tracing: Fix wrong return in kprobe_event_gen_test.c
Costa Shulyupin [Thu, 16 Mar 2023 14:45:35 +0000 (16:45 +0200)]
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.
Vlastimil Babka [Wed, 15 Mar 2023 14:24:46 +0000 (15:24 +0100)]
ring-buffer: remove obsolete comment for free_buffer_page()
The comment refers to mm/slob.c which is being removed. It comes from
commit ed56829cb319 ("ring_buffer: reset buffer page when freeing") and
according to Steven the borrowed code was a page mapcount and mapping
reset, which was later removed by commit e4c2ce82ca27 ("ring_buffer:
allocate buffer page pointer"). Thus the comment is not accurate anyway,
remove it.
Sung-hun Kim [Tue, 14 Mar 2023 01:37:07 +0000 (10:37 +0900)]
tracing: Make splice_read available again
Since the commit 36e2c7421f02 ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.
This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.
Linus Torvalds [Sun, 19 Mar 2023 16:57:53 +0000 (09:57 -0700)]
Merge tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fix from Borislav Petkov:
- Flush out logged errors immediately after MCA banks configuration
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
* tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure logged MCEs are processed after sysfs update
Linus Torvalds [Sun, 19 Mar 2023 16:47:55 +0000 (09:47 -0700)]
Merge tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Check whether sibling events have been deactivated before adding them
to groups
- Update the proper event time tracking variable depending on the event
type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
* tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix check before add_event_to_groups() in perf_group_detach()
perf: fix perf_event_context->time
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
Linus Torvalds [Sun, 19 Mar 2023 16:43:41 +0000 (09:43 -0700)]
Merge tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"There's a little bit more 'movement' in there for my taste but it
needs to happen and should make the code better after it.
- Check cmdline_find_option()'s return value before further
processing
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from
potentially malicious SEV guests issuing requests in rapid
succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received a
cleanup, split in more or less trivial, small and digestible
pieces. Otherwise, the code was threatening to become an
unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so
that there's no differences between the upstream code and the
stable variant when it comes down to backporting more there"
* tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix use of uninitialized buffer in sme_enable()
x86/resctrl: Clear staged_config[] before and after it is used
virt/coco/sev-guest: Add throttling awareness
virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case
virt/coco/sev-guest: Do some code style cleanups
virt/coco/sev-guest: Carve out the request issuing logic into a helper
virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()
virt/coco/sev-guest: Simplify extended guest request handling
virt/coco/sev-guest: Check SEV_SNP attribute at probe time
To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.
Tero Kristo [Fri, 10 Mar 2023 10:04:50 +0000 (12:04 +0200)]
trace/hwlat: Do not wipe the contents of per-cpu thread data
Do not wipe the contents of the per-cpu kthread data when starting the
tracer, as this will completely forget about already running instances
and can later start new additional per-cpu threads.
Tom Rix [Thu, 9 Mar 2023 15:04:14 +0000 (10:04 -0500)]
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
smatch reports several similar warnings
kernel/trace/trace_osnoise.c:220:1: warning:
symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:243:1: warning:
symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:335:14: warning:
symbol 'interface_lock' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2242:5: warning:
symbol 'timerlat_min_period' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2243:5: warning:
symbol 'timerlat_max_period' was not declared. Should it be static?
These variables are only used in trace_osnoise.c, so it should be static
Anton Gusev [Tue, 31 Jan 2023 07:58:18 +0000 (10:58 +0300)]
tracing: Fix wrong return in kprobe_event_gen_test.c
Overwriting the error code with the deletion result may cause the
function to return 0 despite encountering an error. Commit b111545d26c0
("tracing: Remove the useless value assignment in
test_create_synth_event()") solves a similar issue by
returning the original error code, so this patch does the same.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Eric Biggers [Mon, 13 Mar 2023 22:12:31 +0000 (15:12 -0700)]
fscrypt: check for NULL keyring in fscrypt_put_master_key_activeref()
It is a bug for fscrypt_put_master_key_activeref() to see a NULL
keyring. But it used to be possible due to the bug, now fixed, where
fscrypt_destroy_keyring() was called before security_sb_delete(). To be
consistent with how fscrypt_destroy_keyring() uses WARN_ON for the same
issue, WARN and leak the fscrypt_master_key if the keyring is NULL
instead of dereferencing the NULL pointer.
Linus Torvalds [Sat, 18 Mar 2023 23:01:34 +0000 (16:01 -0700)]
Merge tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"The majority of lines changed is due to a code style cleanup in the
pnmtologo helper program.
Arnd removed the omap1 osk driver and the SIS fb driver is now
orphaned.
Other than that it's the usual bunch of small fixes and cleanups, e.g.
prevent possible divide-by-zero in various fb drivers if the pixclock
is zero and various conversions to devm_platform*() and of_property*()
functions:
- Drop omap1 osk driver
- Various potential divide by zero pixclock fixes
- Add pixelclock and fb_check_var() to stifb
- Code style cleanups and indenting fixes"
* tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Use of_property_present() for testing DT property presence
fbdev: au1200fb: Fix potential divide by zero
fbdev: lxfb: Fix potential divide by zero
fbdev: intelfb: Fix potential divide by zero
fbdev: nvidia: Fix potential divide by zero
fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks
fbdev: omapfb: remove omap1 osk driver
fbdev: xilinxfb: Use devm_platform_get_and_ioremap_resource()
fbdev: wm8505fb: Use devm_platform_ioremap_resource()
fbdev: pxa3xx-gcu: Use devm_platform_get_and_ioremap_resource()
fbdev: Use of_property_read_bool() for boolean properties
fbdev: clps711x-fb: Use devm_platform_get_and_ioremap_resource()
fbdev: tgafb: Fix potential divide by zero
MAINTAINERS: orphan SIS FRAMEBUFFER DRIVER
fbdev: omapfb: cleanup inconsistent indentation
drivers: video: logo: add SPDX comment, remove GPL notice in pnmtologo.c
drivers: video: logo: fix code style issues in pnmtologo.c
Linus Torvalds [Sat, 18 Mar 2023 18:49:48 +0000 (11:49 -0700)]
Merge tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Exclude kallsyms_seqs_of_names from kallsyms to fix build error
- Fix 'make kernelrelease' for external module builds
- Get the Debian source package compilable again
- Fix the wrong uname when Debian packages are built with the
KDEB_PKGVERSION option
- Fix superfluous CROSS_COMPILE when building Debian packages
- Fix RPM package build error when KCONFIG_CONFIG is set
- Use 'git archive' for creating source tarballs
- Remove the scripts/list-gitignored tool
* tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use git-archive for source package creation
kbuild: rpm-pkg: move source components to rpmbuild/SOURCES
kbuild: deb-pkg: use dh_listpackages to know enabled packages
kbuild: deb-pkg: split image and debug objects staging out into functions
kbuild: deb-pkg: set CROSS_COMPILE only when undefined
kbuild: deb-pkg: do not take KERNELRELEASE from the source version
kbuild: deb-pkg: make debian source package working again
Makefile: Make kernelrelease target work with M=
kconfig: Update config changed flag before calling callback
kallsyms: add kallsyms_seqs_of_names to list of special symbols
Linus Torvalds [Sat, 18 Mar 2023 18:33:44 +0000 (11:33 -0700)]
Merge tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc2992, adm1266: Set missing can_sleep flag
- tmp512/tmp513: Drop of_match_ptr for ID table to fix build with
!CONFIG_OF
- ucd90320: Fix back-to-back access problem
- ina3221: Fix bad error return from probe function
- xgene: Fix use-after-free bug in remove function
- adt7475: Fix hysteresis register bit masks, and fix association of
'smoothing' attributes
* tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc2992) Set `can_sleep` flag for GPIO chip
hwmon: (adm1266) Set `can_sleep` flag for GPIO chip
hwmon: tmp512: drop of_match_ptr for ID table
hwmon: (ucd90320) Add minimum delay between bus accesses
hwmon: (ina3221) return prober error code
hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition
hwmon: (adt7475) Fix masking of hysteresis registers
hwmon: (adt7475) Display smoothing attributes in correct order
Linus Torvalds [Sat, 18 Mar 2023 18:25:39 +0000 (11:25 -0700)]
Merge tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Two fixes from Ondrej for the pata_parport driver to address an issue
with error handling during drive connection and to fix memory leaks
in case of errors during initialization and when disconnecting a
device.
* tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: fix memory leaks
ata: pata_parport: fix parport release without claim
The __find_restype() function loops over the m5mols_default_ffmt[]
array, and the termination condition ends up being wrong: instead of
stopping when the iterator becomes the size of the array it traverses,
it stops after it has already overshot the array.
Now, in practice this doesn't likely matter, because the code will
always find the entry it looks for, and will thus return early and never
hit that last extra iteration.
But it turns out that clang will unroll the loop fully, because it has
only two iterations (well, three due to the off-by-one bug), and then
clang will end up just giving up in the middle of the loop unrolling
when it notices that the code walks past the end of the array.
And that made 'objtool' very unhappy indeed, because the generated code
just falls off the edge of the universe, and ends up falling through to
the next function, causing this warning:
drivers/media/i2c/m5mols/m5mols.o: warning: objtool: m5mols_set_fmt() falls through to next function m5mols_get_frame_desc()
Fix the loop ending condition.
Reported-by: Jens Axboe <axboe@kernel.dk> Analyzed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Analyzed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/linux-block/CAHk-=wgTSdKYbmB1JYM5vmHMcD9J9UZr0mn7BOYM_LudrP+Xvw@mail.gmail.com/ Fixes: bc125106f8af ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP") Cc: HeungJun, Kim <riverful.kim@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Layton [Fri, 17 Mar 2023 17:13:08 +0000 (13:13 -0400)]
nfsd: don't replace page in rq_pages if it's a continuation of last page
The splice read calls nfsd_splice_actor to put the pages containing file
data into the svc_rqst->rq_pages array. It's possible however to get a
splice result that only has a partial page at the end, if (e.g.) the
filesystem hands back a short read that doesn't cover the whole page.
nfsd_splice_actor will plop the partial page into its rq_pages array and
return. Then later, when nfsd_splice_actor is called again, the
remainder of the page may end up being filled out. At this point,
nfsd_splice_actor will put the page into the array _again_ corrupting
the reply. If this is done enough times, rq_next_page will overrun the
array and corrupt the trailing fields -- the rq_respages and
rq_next_page pointers themselves.
If we've already added the page to the array in the last pass, don't add
it to the array a second time when dealing with a splice continuation.
This was originally handled properly in nfsd_splice_actor, but commit 91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()") removed the check
for it.
Fixes: 91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()") Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Dario Lesca <d.lesca@solinos.it> Tested-by: David Critch <dcritch@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2150630 Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
Linus Torvalds [Fri, 17 Mar 2023 18:20:27 +0000 (11:20 -0700)]
Merge tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A bit bigger than usual, as the NVMe pull request missed last weeks
submission. In detail:
- NVMe pull request via Christoph:
- Avoid potential UAF in nvmet_req_complete (Damien Le Moal)
- More quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
- Fix a memory leak in the nvme-pci probe teardown path
(Irvin Cote)
- Repair the MAINTAINERS entry (Lukas Bulwahn)
- Fix handling single range discard request (Ming Lei)
- Show more opcode names in trace events (Minwoo Im)
- Fix nvme-tcp timeout reporting (Sagi Grimberg)
- MD pull request via Song:
- Two fixes for old issues (Neil)
- Resource leak in device stopping (Xiao)
- Fix for reversal of request ordering upon issue for certain cases
(Jan)
- null_blk timeout fixes (Damien)
- Loop use-after-free fix (Bart)
- blk-mq SRCU fix for BLK_MQ_F_BLOCKING devices (Chris)"
* tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux:
block: remove obsolete config BLOCK_COMPAT
md: select BLOCK_LEGACY_AUTOLOAD
block: count 'ios' and 'sectors' when io is done for bio-based device
block: sunvdc: add check for mdesc_grab() returning NULL
nvmet: avoid potential UAF in nvmet_req_complete()
nvme-trace: show more opcode names
nvme-tcp: add nvme-tcp pdu size build protection
nvme-tcp: fix opcode reporting in the timeout handler
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
nvme-pci: fixing memory leak in probe teardown path
nvme: fix handling single range discard request
MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
block: null_blk: cleanup null_queue_rq()
block: null_blk: Fix handling of fake timeout request
blk-mq: fix "bad unlock balance detected" on q->srcu in __blk_mq_run_dispatch_ops
loop: Fix use-after-free issues
block: do not reverse request order when flushing plug list
md: avoid signed overflow in slot_store()
md: Free resources in __md_stop
Linus Torvalds [Fri, 17 Mar 2023 18:12:07 +0000 (11:12 -0700)]
Merge tag 'io_uring-6.3-2023-03-16' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- When PF_NO_SETAFFINITY was removed for io-wq threads, we kind of
forgot about the SQPOLL thread. Remove it there as well, there's even
less of a reason to set it there (Michal)
- Fixup a confusing 'ret' setting (Li)
- When MSG_RING is used to send a direct descriptor to another ring,
it's possible to have it allocate it on the target ring rather than
provide a specific index for it. If this is done, return the chosen
value in the CQE, like we would've done locally (Pavel)
- Fix a regression in this series on huge page bvec collapsing (Pavel)
* tag 'io_uring-6.3-2023-03-16' of git://git.kernel.dk/linux:
io_uring/rsrc: fix folio accounting
io_uring/msg_ring: let target know allocated index
io_uring: rsrc: Optimize return value variable 'ret'
io_uring/sqpoll: Do not set PF_NO_SETAFFINITY on sqpoll threads
Linus Torvalds [Fri, 17 Mar 2023 18:02:26 +0000 (11:02 -0700)]
Merge tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an error code path issue in a cpuidle driver and make the
sleepgraph utility more robust against unexpected input.
Specifics:
- Fix the psci_pd_init_topology() failure path in the PSCI cpuidle
driver (Shawn Guo)
- Modify the sleepgraph utility so it does not crash on binary data
in device names (Todd Brandt)"
* tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
pm-graph: sleepgraph: Avoid crashing on binary data in device names
cpuidle: psci: Iterate backwards over list in psci_pd_remove()
Linus Torvalds [Fri, 17 Mar 2023 17:57:09 +0000 (10:57 -0700)]
Merge tag 'acpi-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add some new quirks, fix PPTT handling, fix an ACPI utility and
correct a mistake in the ACPI documentation.
Specifics:
- Fix ACPI PPTT handling to avoid sleep in the atomic context when it
is not present (Sudeep Holla)
- Add 'backlight=native' DMI quirk for Dell Vostro 15 3535 to the
ACPI video driver (Chia-Lin Kao)
- Add ACPI quirks for I2C device enumeration on Lenovo Yoga Book X90
and Acer Iconia One 7 B1-750 (Hans de Goede)
- Fix handling of invalid command line option values in the ACPI
pfrut utility (Chen Yu)
- Fix references to I2C device data type in the ACPI documentation
for device enumeration (Andy Shevchenko)"
* tag 'acpi-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range
ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750
ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper
ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535
ACPI: docs: enumeration: Correct reference to the I²C device data type
Linus Torvalds [Fri, 17 Mar 2023 17:33:33 +0000 (10:33 -0700)]
Merge tag 'riscv-for-linus-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fixes to the ASID allocator to avoid leaking stale mappings between
tasks
- fix the vmalloc fault handler to tolerate huge pages
* tag 'riscv-for-linus-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: mm: Support huge page in vmalloc_fault()
riscv: asid: Fixup stale TLB entry cause application crash
Revert "riscv: mm: notify remote harts about mmu cache updates"
Linus Torvalds [Fri, 17 Mar 2023 17:15:53 +0000 (10:15 -0700)]
Merge tag 's390-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Update defconfigs
- Fix early boot code by adding missing intersection check to prevent
potential overwriting of the ipl report
- Fix a use-after-free issue in s390-specific code related to PCI
resources being retained after hot-unplugging individual functions,
by removing the resources from the PCI bus's resource list and using
the zpci_bar_struct's resource pointer directly
* tag 's390-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
PCI: s390: Fix use-after-free of PCI resources with per-function hotplug
s390/ipl: add missing intersection check to ipl_report handling
Linus Torvalds [Fri, 17 Mar 2023 17:01:07 +0000 (10:01 -0700)]
Merge tag 'powerpc-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix false detection of read faults, introduced by execute-only
support
- Fix a build failure when GENERIC_ALLOCATOR is not selected
Thanks to Russell Currey, Randy Dunlap, Michal Suchánek, Nathan Lynch,
and Benjamin Gray.
* tag 'powerpc-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix false detection of read faults
powerpc/pseries: RTAS work area requires GENERIC_ALLOCATOR
Linus Torvalds [Fri, 17 Mar 2023 16:43:10 +0000 (09:43 -0700)]
Merge tag 'sound-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing surprising, a collection of small device-specific fixes.
The majority of changes are for ASoC Intel stuff, while a few other
ASoC and HD-audio fixes are found"
* tag 'sound-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits)
ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
ALSA: asihpi: check pao in control_message()
ASoC: hdmi-codec: only startup/shutdown on supported streams
ASoC: da7219: Initialize jack_det_mutex
ALSA: hda: Match only Intel devices with CONTROLLER_IN_GPU()
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro
ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform
ALSA: hda: intel-dsp-config: add MTL PCI id
ASoC: SOF: IPC4: update gain ipc msg definition to align with fw
ASoC: SOF: sof-audio: don't squelch errors in WIDGET_SETUP phase
ASoC: SOF: Intel: hda-ctrl: re-add sleep after entering and exiting reset
ASoC: SOF: Intel: hda-dsp: harden D0i3 programming sequence
ASoC: SOF: ipc4-topology: set dmic dai index from copier
ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP
ASoC: SOF: Intel: pci-tng: revert invalid bar size setting
ASoC: SOF: topology: Fix error handling in sof_widget_ready()
ASoC: Intel: soc-acpi: fix copy-paste issue in topology names
ASoC: SOF: ipc4-topology: Fix incorrect sample rate print unit
ASoC: SOF: ipc3: Check for upper size limit for the received message
ASOC: SOF: Intel: pci-tgl: Fix device description
...
Linus Torvalds [Fri, 17 Mar 2023 16:35:40 +0000 (09:35 -0700)]
Merge tag 'drm-fixes-2023-03-17' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Seems like a pretty regular rc3, i915 and amdgpu with the usual
selection of fixes, then a scattering of fixes across misc drivers and
other areas:
i915:
- Fix hwmon PL1 power limit enabling
- Fix audio ELD handling for DP MST
- Fix PSR io and wake line calculations
- Fix DG2 HDMI modes with 267.30 and 319.89 MHz pixel clocks
- Fix SSEU subslice out-of-bounds access
- Fix misuse of non-idle barriers as fence trackers
amdgpu:
- SMU 13 update
- RDNA2 suspend/resume fix when overclocking is enabled
- SRIOV VCN fixes
- HDCP suspend/resume fix
- Fix drm polling splat regression
- Fix dirty rectangle tracking for PSR
- Fix vangogh regression on certain BIOSes
- Misc display fixes
- Suspend/resume IOMMU regression fix
amdkfd:
- Fix BO offset for multi-VMA page migration
- Fix a possible double free
- Fix potential use after free
- Fix process cleanup on module exit
bridge:
- fix returned array size name documentation
fbdev:
- ref-counting fix for fbdev deferred I/O
virtio:
- dma sync fix
shmem-helper:
- error path fix
msm:
- shrinker blocking fix
panfrost:
- shrinker rpm fix
chipsfb:
- fix error code
meson:
- fix 1px pink line
- fix regulator interaction
sun4i:
- fix missing component unbind"
* tag 'drm-fixes-2023-03-17' of git://anongit.freedesktop.org/drm/drm: (38 commits)
drm/ttm: drop extra ttm_bo_put in ttm_bo_cleanup_refs
drm/amdgpu: Don't resume IOMMU after incomplete init
drm/amdkfd: Fixed kfd_process cleanup on module exit.
drm/amd/display: disconnect MPCC only on OTG change
drm/amd/display: Fix DP MST sinks removal issue
drm/amd/display: Do not set DRR on pipe Commit
drm/amd/display: Remove OTG DIV register write for Virtual signals.
drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion again
drm/bridge: Fix returned array size name for atomic_get_input_bus_fmts kdoc
drm/amdgpu/vcn: Disable indirect SRAM on Vangogh broken BIOSes
drm/amdgpu/nv: fix codec array for SR_IOV
drm/amd/display: Write to correct dirty_rect
drm/amdgpu: move poll enabled/disable into non DC path
drm/amd/display: Fix HDCP failing to enable after suspend
drm/amdkfd: fix potential kgd_mem UAFs
drm/amdgpu/vcn: custom video info caps for sriov
drm/amd/pm: Fix sienna cichlid incorrect OD volage after resume
drm/amd/pm: bump SMU 13.0.4 driver_if header version
drm/amdkfd: fix a potential double free in pqm_create_queue
drm/amdkfd: Get prange->offset after svm_range_vram_node_new
...
Linus Torvalds [Fri, 17 Mar 2023 16:30:57 +0000 (09:30 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten patches, eight in drivers and two in the core, which correct a
regression from directory removal and add a no VPD size quirk also to
fix a regression. All pretty small"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: mcq: Use active_reqs to check busy in clock scaling
scsi: core: Fix a procfs host directory removal regression
scsi: core: Add BLIST_NO_VPD_SIZE for some VDASD
scsi: mpi3mr: Fix expander node leak in mpi3mr_remove()
scsi: mpi3mr: Fix memory leaks in mpi3mr_init_ioc()
scsi: mpi3mr: Fix sas_hba.phy memory leak in mpi3mr_remove()
scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove()
scsi: mpi3mr: Fix config page DMA memory leak
scsi: mpi3mr: Fix throttle_groups memory leak
scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add()
Merge branches 'acpi-video', 'acpi-x86', 'acpi-tools' and 'acpi-docs'
Merge a new ACPI backlight quirk, new ACPI quirks for I2C device
enumeration on some platforms, a pfrut utility fix and an ACPI
documentation fix for 6.3-rc3:
- Add backlight=native DMI quirk for Dell Vostro 15 3535 to the ACPI
video driver (Chia-Lin Kao).
- Add ACPI quirks for I2C devices enumeration on Lenovo Yoga Book X90
and Acer Iconia One 7 B1-750 (Hans de Goede).
- Fix handling of invalid command line option values in the ACPI pfrut
utility (Chen Yu).
- Fix references to I2C device data type in the ACPI documentation for
device enumeration (Andy Shevchenko).
Antti Laakso [Wed, 25 Jan 2023 13:17:50 +0000 (15:17 +0200)]
tools/power turbostat: fix decoding of HWP_STATUS
The "excursion to minimum" information is in bit2
in HWP_STATUS MSR. Fix the bitmask used for
decoding the register.
Signed-off-by: Antti Laakso <antti.laakso@intel.com> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
David S. Miller [Fri, 17 Mar 2023 07:56:41 +0000 (07:56 +0000)]
Merge branch 'bonding-fixes'
Nikolay Aleksandrov says:
====================
bonding: properly restore flags when bond changes ether type
A bug was reported by syzbot[1] that causes a warning and a myriad of
other potential issues if a bond, that is also a slave, fails to enslave a
non-eth device. While fixing that bug I found that we have the same
issues when such enslave passes and after that the bond changes back to
ARPHRD_ETHER (again due to ether_setup). This set fixes all issues by
extracting the ether_setup() sequence in a helper which does the right
thing about bond flags when it needs to change back to ARPHRD_ETHER. It
also adds selftests for these cases.
Patch 01 adds the new bond_ether_setup helper and fixes the issues when a
bond device changes its ether type due to successful enslave. Patch 02
fixes the issues when it changes its ether type due to an unsuccessful
enslave. Note we need two patches because the bugs were introduced by
different commits. Patch 03 adds the new selftests.
Due to the comment adjustment and squash, could you please review
patch 01 again? I've kept the other acks since there were no code
changes.
v3: squash the helper patch and the first fix, adjust the comment above
it to be explicit about the bond device, no code changes
v2: new set, all patches are new due to new approach of fixing these bugs
selftests: bonding: add tests for ether type changes
Add new network selftests for the bonding device which exercise the ether
type changing call paths. They also test for the recent syzbot bug[1] which
causes a warning and results in wrong device flags (IFF_SLAVE missing).
The test adds three bond devices and a nlmon device, enslaves one of the
bond devices to the other and then uses the nlmon device for successful
and unsuccesful enslaves both of which change the bond ether type. Thus
we can test for both MASTER and SLAVE flags at the same time.
If the flags are properly restored we get:
TEST: Change ether type of an enslaved bond device with unsuccessful enslave [ OK ]
TEST: Change ether type of an enslaved bond device with successful enslave [ OK ]
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
syzbot reported a warning[1] where the bond device itself is a slave and
we try to enslave a non-ethernet device as the first slave which fails
but then in the error path when ether_setup() restores the bond device
it also clears all flags. In my previous fix[2] I restored the
IFF_MASTER flag, but I didn't consider the case that the bond device
itself might also be a slave with IFF_SLAVE set, so we need to restore
that flag as well. Use the bond_ether_setup helper which does the right
thing and restores the bond's flags properly.
Steps to reproduce using a nlmon dev:
$ ip l add nlmon0 type nlmon
$ ip l add bond1 type bond
$ ip l add bond2 type bond
$ ip l set bond1 master bond2
$ ip l set dev nlmon0 master bond1
$ ip -d l sh dev bond1
22: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noqueue master bond2 state DOWN mode DEFAULT group default qlen 1000
(now bond1's IFF_SLAVE flag is gone and we'll hit a warning[3] if we
try to delete it)
Fixes: 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure") Reported-by: syzbot+9dfc3f3348729cc82277@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
Add bond_ether_setup helper which is used to fix ether_setup() calls in the
bonding driver. It takes care of both IFF_MASTER and IFF_SLAVE flags, the
former is always restored and the latter only if it was set.
If the bond enslaves non-ARPHRD_ETHER device (changes its type), then
releases it and enslaves ARPHRD_ETHER device (changes back) then we
use ether_setup() to restore the bond device type but it also resets its
flags and removes IFF_MASTER and IFF_SLAVE[1]. Use the bond_ether_setup
helper to restore both after such transition.
[1] reproduce (nlmon is non-ARPHRD_ETHER):
$ ip l add nlmon0 type nlmon
$ ip l add bond2 type bond mode active-backup
$ ip l set nlmon0 master bond2
$ ip l set nlmon0 nomaster
$ ip l add bond1 type bond
(we use bond1 as ARPHRD_ETHER device to restore bond2's mode)
$ ip l set bond1 master bond2
$ ip l sh dev bond2
37: bond2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether be:d7:c5:40:5b:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
(notice bond2's IFF_MASTER is missing)
Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
If the RX descriptor doesn't have any data, the output value of quote
from rswitch_rx() will be increased unexpectedily. So, fix it.
Reported-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com> Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Liang He [Wed, 15 Mar 2023 06:00:21 +0000 (14:00 +0800)]
ethernet: sun: add check for the mdesc_grab()
In vnet_port_probe() and vsw_port_probe(), we should
check the return value of mdesc_grab() as it may
return NULL which can caused NPD bugs.
Fixes: 5d01fa0c6bd8 ("ldmvsw: Add ldmvsw.c driver code") Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Christian König [Thu, 16 Mar 2023 07:26:47 +0000 (08:26 +0100)]
drm/ttm: drop extra ttm_bo_put in ttm_bo_cleanup_refs
That was accidentially left over when we switched to the delayed delete
worker.
Suggested-by: Matthew Auld <matthew.william.auld@gmail.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 9bff18d13473 ("drm/ttm: use per BO cleanup workers") Reported-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316072647.406707-1-christian.koenig@amd.com
Jakub Kicinski [Fri, 17 Mar 2023 04:33:20 +0000 (21:33 -0700)]
Merge branch 'net-ipa-minor-bug-fixes'
Alex Elder says:
====================
net: ipa: minor bug fixes
The four patches in this series fix some errors, though none of them
cause any compile or runtime problems.
The first changes the files included by "drivers/net/ipa/reg.h" to
ensure everything it requires is included with the file. It also
stops unnecessarily including another file. The prerequisites are
apparently satisfied other ways, currently.
The second adds two struct declarations to "gsi_reg.h", to ensure
they're declared before they're used later in the file. Again, it
seems these declarations are currently resolved wherever this file
is included.
The third removes register definitions that were added for IPA v5.0
that are not needed. And the last updates some validity checks for
IPA v5.0 registers. No IPA v5.0 platforms are yet supported, so the
issues resolved here were never harmful.
Versions 2 and 3 of this series change the "Fixes" tags in patches
so they supply legitimate commit hashes.
====================
Alex Elder [Thu, 16 Mar 2023 14:51:36 +0000 (09:51 -0500)]
net: ipa: fix some register validity checks
A recent commit defined HW_PARAM_4 as a GSI register ID but did not
add it to gsi_reg_id_valid() to indicate it's valid (for IPA v5.0+).
Add version checks for the HW_PARAM_2 and INTER_EE IRQ GSI registers
there as well.
IPA v5.0 supports up to 8 source and destination resource groups.
Update the validity check (and the comments where the register IDs
are defined) to reflect that. Similarly update comments and
validity checks for the hash/cache-related registers.
Note that this patch fixes an omission and constrains things
further, but these don't technically represent bugs.
Fixes: f651334e1ef5 ("net: ipa: add HW_PARAM_4 GSI register") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 16 Mar 2023 14:51:35 +0000 (09:51 -0500)]
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
A recent commit defined a few IPA registers used for IPA v5.0+.
One of those was a mistake. Although the filter and router caches
get *flushed* using a single register, they use distinct registers
(ENDP_FILTER_CACHE_CFG and ENDP_ROUTER_CACHE_CFG) for configuration.
And although there *exists* a FILT_ROUT_CACHE_CFG register, it is
not needed in upstream code. So get rid of definitions related to
FILT_ROUT_CACHE_CFG, because they are not needed.
Fixes: 8ba59716d16a ("net: ipa: define IPA v5.0+ registers") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 16 Mar 2023 14:51:34 +0000 (09:51 -0500)]
net: ipa: add two missing declarations
When gsi_reg_init() got added, its declaration was added to
"gsi_reg.h" without declaring the two struct pointer types it uses.
Add these struct declarations to "gsi_reg.h".
Fixes: 3c506add35c7 ("net: ipa: introduce gsi_reg_init()") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 16 Mar 2023 14:51:33 +0000 (09:51 -0500)]
net: ipa: reg: include <linux/bug.h>
When "reg.h" got created, it included calls to WARN() and WARN_ON().
Those macros are defined via <linux/bug.h>. In addition, it uses
is_power_of_2(), which is defined in <linux/log2.h>. Include those
files so IPA "reg.h" has access to all definitions it requires.
Meanwhile, <linux/bits.h> is included but nothing defined therein
is required directly in "reg.h", so get rid of that.
Fixes: 81772e444dbe ("net: ipa: start generalizing "ipa_reg"") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 16 Mar 2023 22:02:34 +0000 (15:02 -0700)]
net: xdp: don't call notifiers during driver init
Drivers will commonly perform feature setting during init, if they use
the xdp_set_features_flag() helper they'll likely run into an ASSERT_RTNL()
inside call_netdevice_notifiers_info().
Don't call the notifier until the device is actually registered.
Nothing should be tracking the device until its registered and
after its unregistration has started.
====================
net/sched: fix parsing of TCA_EXT_WARN_MSG for tc action
In my previous commit 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's rever the previous fix 923b2e30dc9c ("net/sched: act_api: move
TCA_EXT_WARN_MSG to the correct hierarchy") and add a new
TCA_ROOT_EXT_WARN_MSG for tc action specifically.
Here is the tdc test result:
1..1119
ok 1 d959 - Add cBPF action with valid bytecode
ok 2 f84a - Add cBPF action with invalid bytecode
ok 3 e939 - Add eBPF action with valid object-file
ok 4 282d - Add eBPF action with invalid object-file
ok 5 d819 - Replace cBPF bytecode and action control
ok 6 6ae3 - Delete cBPF action
ok 7 3e0d - List cBPF actions
ok 8 55ce - Flush BPF actions
ok 9 ccc3 - Add cBPF action with duplicate index
ok 10 89c7 - Add cBPF action with invalid index
[...]
ok 1115 2348 - Show TBF class
ok 1116 84a0 - Create TEQL with default setting
ok 1117 7734 - Create TEQL with multiple device
ok 1118 34a9 - Delete TEQL with valid handle
ok 1119 6289 - Show TEQL stats
====================
Hangbin Liu [Thu, 16 Mar 2023 03:37:53 +0000 (11:37 +0800)]
net/sched: act_api: add specific EXT_WARN_MSG for tc action
In my previous commit 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this
param before going to the TCA_ACT_TAB nest.
Fixes: 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is not a correct fix as TCA_EXT_WARN_MSG is not a hierarchy to
TCA_ACT_TAB. I didn't notice the TC actions use different enum when adding
TCA_EXT_WARN_MSG. To fix the difference I will add a new WARN enum in
TCA_ROOT_MAX as Jamal suggested.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek Vasut [Wed, 15 Mar 2023 23:19:16 +0000 (01:19 +0200)]
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
The blamed commit has replaced a ksz_write8() call to address
REG_PORT_5_CTRL_6 (0x56) with a ksz_set_xmii() -> ksz_pwrite8() call to
regs[P_XMII_CTRL_1], which is also defined as 0x56 for ksz8795_regs[].
The trouble is that, when compared to ksz_write8(), ksz_pwrite8() also
adjusts the register offset with the port base address. So in reality,
ksz_pwrite8(offset=0x56) accesses register 0x56 + 0x50 = 0xa6, which in
this switch appears to be unmapped, and the RGMII delay configuration on
the CPU port does nothing.
So if the switch wasn't fine with the RGMII delay configuration done
through pin strapping and relied on Linux to apply a different one in
order to pass traffic, this is now broken.
Using the offset translation logic imposed by ksz_pwrite8(), the correct
value for regs[P_XMII_CTRL_1] should have been 0x6 on ksz8795_regs[], in
order to really end up accessing register 0x56.
Static code analysis shows that, despite there being multiple other
accesses to regs[P_XMII_CTRL_1] in this driver, the only code path that
is applicable to ksz8795_regs[] and ksz8_dev_ops is ksz_set_xmii().
Therefore, the problem is isolated to RGMII delays.
In its current form, ksz8795_regs[] contains the same value for
P_XMII_CTRL_0 and for P_XMII_CTRL_1, and this raises valid suspicions
that writes made by the driver to regs[P_XMII_CTRL_0] might overwrite
writes made to regs[P_XMII_CTRL_1] or vice versa.
Again, static analysis shows that the only accesses to P_XMII_CTRL_0
from the driver are made from code paths which are not reachable with
ksz8_dev_ops. So the accesses made by ksz_set_xmii() are safe for this
switch family.
[ vladimiroltean: rewrote commit message ]
Fixes: c476bede4b0f ("net: dsa: microchip: ksz8795: use common xmii function") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230315231916.2998480-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / mirror_ubuntu-kernels.git / log