Recent changes in the driver core appear to mean that the data structures
for the driver core are not fully initialised unless the driver is bound.
Make sure the driver core knows the dummy driver is in use by binding it
to a driver.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Colin Cross [Fri, 27 May 2011 19:25:27 +0000 (12:25 -0700)]
regulator: twl-regulator: fix n_voltages for twl6030 variable LDOs
The n_voltages initializer for the TWL6030_ADJUSTABLE_LDO macro is
off by one, causing the the highest supported voltage to be
unreachable. Setting the machine constraints to only allow the
highest voltage causes errors:
machine_constraints_voltage: VAUX3_6030: unsupportable voltage constraints
twl_reg twl_reg.39: can't register VAUX3_6030, -22
twl_reg: probe of twl_reg.39 failed with error -22
This patch fixes the off by one error. Tested by setting
VAUX3_6030 to 3.3V.
Signed-off-by: Colin Cross <ccross@android.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Tue, 24 May 2011 00:12:40 +0000 (08:12 +0800)]
regulator: Do bulk enables of regulators in parallel
In order to reduce the impact of ramp times rather than enabling the
regulators for a device in series use async tasks to run the actual
enables. This means that the delays which the enables implement can all
run in parallel, though it does mean that the order in which the
supplies come on may be unstable.
For super bonus fun points if any of the regulators are shared between
multiple supplies on the same device (as is rather likely) then this
will test our locking. Note that in this case we only delay once for
each physical regulator so the threads shouldn't block each other while
delaying.
It'd be even nicer if we could coalesce writes to a shared enable registers
in PMICs but that's definitely future work, and it may also be useful
and is certainly more achievable to optimise out the parallelism if none
of the regulators implement ramp delays.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Linus Torvalds [Sun, 29 May 2011 21:06:42 +0000 (14:06 -0700)]
arm gpio drivers: make them 'depends on ARM'
We had a few drivers move from arch/arm into drivers/gpio, but they
don't actually compile without the ARM platform headers etc. As a
result they were messing up allyesconfig on x86.
Tyler Hicks [Tue, 24 May 2011 10:11:12 +0000 (05:11 -0500)]
eCryptfs: Remove ecryptfs_header_cache_2
Now that ecryptfs_lookup_interpose() is no longer using
ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be
removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to
ecryptfs_header_cache.
Tyler Hicks [Tue, 24 May 2011 09:56:23 +0000 (04:56 -0500)]
eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose()
ecryptfs_lookup_interpose() has turned into spaghetti code over the
years. This is an effort to clean it up.
- Shorten overly descriptive variable names such as ecryptfs_dentry
- Simplify gotos and error paths
- Create helper function for reading plaintext i_size from metadata
It also includes an optimization when reading i_size from the metadata.
A complete page-sized kmem_cache_alloc() was being done to read in 16
bytes of metadata. The buffer for that is now statically declared.
Tyler Hicks [Mon, 2 May 2011 05:39:54 +0000 (00:39 -0500)]
eCryptfs: Return useful code from contains_ecryptfs_marker
Instead of having the calling functions translate the true/false return
code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or
-EINVAL so that the calling functions can just reuse the return code.
Also, rename the function to ecryptfs_validate_marker() to avoid callers
mistakenly thinking that it returns true/false codes.
Tyler Hicks [Tue, 24 May 2011 08:49:02 +0000 (03:49 -0500)]
eCryptfs: Fix new inode race condition
Only unlock and d_add() new inodes after the plaintext inode size has
been read from the lower filesystem. This fixes a race condition that
was sometimes seen during a multi-job kernel build in an eCryptfs mount.
https://bugzilla.kernel.org/show_bug.cgi?id=36002
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Reported-by: David <david@unsolicited.net> Tested-by: David <david@unsolicited.net>
Linus Torvalds [Sun, 29 May 2011 18:44:33 +0000 (11:44 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits)
acer-wmi: support integer return type from WMI methods
msi-laptop: fix section mismatch in reference from the function load_scm_model_init
acer-wmi: support to set communication device state by new wmid method
acer-wmi: allow 64-bits return buffer from WMI methods
acer-wmi: check the existence of internal 3G device when set capability
platform/x86:delete two unused variables
support wlan hotkey on Acer Travelmate 5735Z
platform-x86: intel_mid_thermal: Fix memory leak
platform/x86: Fix Makefile for intel_mid_powerbtn
platform/x86: Simplify intel_mid_powerbtn
acer-wmi: Delete out-of-date documentation
acerhdf: Clean up includes
acerhdf: Drop pointless dependency on THERMAL_HWMON
acer-wmi: Update MAINTAINERS
wmi: Orphan ACPI-WMI driver
tc1100-wmi: Orphan driver
acer-wmi: does not allow negative number set to initial device state
platform/oaktrail: ACPI EC Extra driver for Oaktrail
thinkpad_acpi: Convert printks to pr_<level>
thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning
...
which was introduced by commit de03c72cfce5 ("mm: convert
mm->cpu_vm_cpumask into cpumask_var_t"), and is due to wrong ordering of
mm_init() vs mm_init_cpumask
Thomas wrote a patch to just fix the ordering of initialization, but I
hate the new double allocation in the fork path, so I ended up instead
doing some more radical surgery to clean it all up.
Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Ingo Molnar <mingo@elte.hu> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 29 May 2011 18:21:12 +0000 (11:21 -0700)]
Merge branch 'for-2.6.40' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: (22 commits)
nfsd: make local functions static
NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session()
NFSD: Check status from nfsd4_map_bcts_dir()
NFSD: Remove setting unused variable in nfsd_vfs_read()
nfsd41: error out on repeated RECLAIM_COMPLETE
nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence
nfsd v4.1 lOCKT clientid field must be ignored
nfsd41: add flag checking for create_session
nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly
nfsd4: fix wrongsec handling for PUTFH + op cases
nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller
nfsd4: introduce OPDESC helper
nfsd4: allow fh_verify caller to skip pseudoflavor checks
nfsd: distinguish functions of NFSD_MAY_* flags
svcrpc: complete svsk processing on cb receive failure
svcrpc: take advantage of tcp autotuning
SUNRPC: Don't wait for full record to receive tcp data
svcrpc: copy cb reply instead of pages
svcrpc: close connection if client sends short packet
svcrpc: note network-order types in svc_process_calldir
...
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
dm kcopyd: return client directly and not through a pointer
dm kcopyd: reserve fewer pages
dm io: use fixed initial mempool size
dm kcopyd: alloc pages from the main page allocator
dm kcopyd: add gfp parm to alloc_pl
dm kcopyd: remove superfluous page allocation spinlock
dm kcopyd: preallocate sub jobs to avoid deadlock
dm kcopyd: avoid pointless job splitting
dm mpath: do not fail paths after integrity errors
dm table: reject devices without request fns
dm table: allow targets to support discards internally
Linus Torvalds [Sun, 29 May 2011 18:20:02 +0000 (11:20 -0700)]
Merge branch 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
SUNRPC: Support for RPC over AF_LOCAL transports
SUNRPC: Remove obsolete comment
SUNRPC: Use AF_LOCAL for rpcbind upcalls
SUNRPC: Clean up use of curly braces in switch cases
NFS: Revert NFSROOT default mount options
SUNRPC: Rename xs_encode_tcp_fragment_header()
nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu()
nfs41: Correct offset for LAYOUTCOMMIT
NFS: nfs_update_inode: print current and new inode size in debug output
NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors
NFSv4: Handle expired stateids when the lease is still valid
SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback...
Linus Torvalds [Sun, 29 May 2011 18:19:16 +0000 (11:19 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI EC: remove redundant code
ACPI: Add D3 cold state
ACPI: processor: fix processor_physically_present in UP kernel
ACPI: Split out custom_method functionality into an own driver
ACPI: Cleanup custom_method debug stuff
ACPI EC: enable MSI workaround for Quanta laptops
ACPICA: Update to version 20110413
ACPICA: Execute an orphan _REG method under the EC device
ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place
ACPICA: Update internal address SpaceID for DataTable regions
ACPICA: Add more methods eligible for NULL package element removal
ACPICA: Split all internal Global Lock functions to new file - evglock
ACPI: EC: add another DMI check for ASUS hardware
ACPI EC: remove dead code
ACPICA: Fix code divergence of global lock handling
ACPICA: Use acpi_os_create_lock interface
ACPI: osl, add acpi_os_create_lock interface
ACPI:Fix goto flows in thermal-sys
Linus Torvalds [Sun, 29 May 2011 18:18:09 +0000 (11:18 -0700)]
Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param
x86 idle: deprecate "no-hlt" cmdline param
x86 idle APM: deprecate CONFIG_APM_CPU_IDLE
x86 idle floppy: deprecate disable_hlt()
x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it
x86 idle: clarify AMD erratum 400 workaround
idle governor: Avoid lock acquisition to read pm_qos before entering idle
cpuidle: menu: fixed wrapping timers at 4.294 seconds
Al Viro [Sun, 29 May 2011 12:46:08 +0000 (13:46 +0100)]
cifs/ubifs: Fix shrinker API change fallout
Commit 1495f230fa77 ("vmscan: change shrinker API by passing
shrink_control struct") changed the API of ->shrink(), but missed ubifs
and cifs instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Boaz Harrosh [Wed, 25 May 2011 18:25:29 +0000 (21:25 +0300)]
pnfs-obj: pg_test check for max_io_size
Implement pg_test vector to test for max IO sizes. We calculate
a max_io_size member only once, and cache it in lseg so to not
do so on every page insert.
Boaz Harrosh [Sun, 29 May 2011 08:45:39 +0000 (11:45 +0300)]
NFSv4.1: define nfs_generic_pg_test
By default, unless pnfs is used coalesce pages until pg_bsize
(rsize or wsize) is reached.
pnfs layout drivers define their own pg_test methods that use
pnfs_generic_pg_test and need to define their own I/O size
limits (e.g. based on the file stripe size).
[Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Benny Halevy [Sun, 22 May 2011 16:53:48 +0000 (19:53 +0300)]
pnfs: encode_layoutcommit
Add a layout driver method to encode the layout type specific
opaque part of layout commit in-line in the xdr stream.
Currently, the pnfs-objects layout driver uses it to encode metadata hints
to the MDS and the blocks layout driver to commit provisionally allocated
extents to the file.
Boaz Harrosh [Thu, 26 May 2011 18:49:46 +0000 (21:49 +0300)]
pnfs-obj: report errors and .encode_layoutreturn Implementation.
An io_state pre-allocates an error information structure for each
possible osd-device that might error during IO. When IO is done if all
was well the io_state is freed. (as today). If the I/O has ended with an
error, the io_state is queued on a per-layout err_list. When eventually
encode_layoutreturn() is called, each error is properly encoded on the
XDR buffer and only then the io_state is removed from err_list and
de-allocated.
It is up to the io_engine to fill in the segment that fault and the type
of osd_error that occurred. By calling objlayout_io_set_result() for
each failing device.
In objio_osd:
* Allocate io-error descriptors space as part of io_state
* Use generic objlayout error reporting at end of io.
With the objects layout security model, we have object capabilities
that are associated with the layout and we anticipate that the server
will issue a cb_layoutrecall for any setattr that changes security
related attributes (user/group/mode/acl) or truncates the file.
Therefore, the layout is returned before issuing the setattr to avoid
the anticipated cb_layoutrecall.
Benny Halevy [Sun, 22 May 2011 16:52:37 +0000 (19:52 +0300)]
pnfs: layoutreturn
NFSv4.1 LAYOUTRETURN implementation
Currently, does not support layout-type payload encoding.
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
[call pnfs_return_layout right before pnfs_destroy_layout]
[remove assert_spin_locked from pnfs_clear_lseg_list]
[remove wait parameter from the layoutreturn path.]
[remove return_type field from nfs4_layoutreturn_args]
[remove range from nfs4_layoutreturn_args]
[no need to send layoutcommit from _pnfs_return_layout]
[don't wait on sync layoutreturn]
[fix layout stateid in layoutreturn args]
[fixed NULL deref in _pnfs_return_layout]
[removed recaim member of nfs4_layoutreturn_args] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
With the use of the in-kernel osd library. Implement read/write
of data from/to osd-objects according to information specified
in the objects-layout.
Support for stripping over mirrors with a received stripe_unit.
There are however a few constrains which are not supported:
1. Stripe Unit must be a multiple of PAGE_SIZE
2. stripe length (stripe_unit * number_of_stripes) can not be
bigger then 32bit.
Also support raid-groups and partial-layout. Partial-layout is
when not all the groups are received on the line, addressing
only a partial range of the file.
TODO:
Only raid0! raid 4/5/6 support will come at later stage
A none supported layout will send IO through the MDS
[Important fallout from the last rebase] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[gfp_flags] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Benny Halevy [Sun, 22 May 2011 16:52:03 +0000 (19:52 +0300)]
pnfs: support for non-rpc layout drivers
Non-rpc layout driver such as for objects and blocks
implement their own I/O path and error handling logic.
Therefore bypass NFS-based error handling for these layout drivers.
[fix lseg ref-count bugs, and null de-refs]
[Fall out from: non-rpc layout drivers] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[get rid of PNFS_USE_RPC_CODE]
[get rid of __nfs4_write_done_cb]
[revert useless change in nfs4_write_done_cb] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Boaz Harrosh [Thu, 26 May 2011 18:45:34 +0000 (21:45 +0300)]
pnfs-obj: objio_osd device information retrieval and caching
When a new layout is received in objio_alloc_lseg all device_ids
referenced are retrieved. The device information is queried for from MDS
and then the osd_device is looked-up from the osd-initiator library. The
devices are cached in a per-mount-point list, for later use. At unmount
all devices are "put" back to the library.
objlayout_get_deviceinfo(), objlayout_put_deviceinfo() middleware
API for retrieving device information given a device_id.
TODO: The device cache can get big. Cap its size. Keep an LRU and start
to return devices which were not used, when list gets to big, or
when new entries allocation fail.
[pnfs-obj: Bugs in new global-device-cache code] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
[use global device cache]
[use layout driver in global device cache] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Boaz Harrosh [Sun, 22 May 2011 16:50:20 +0000 (19:50 +0300)]
pnfs-obj: decode layout, alloc/free lseg
objlayout_alloc_lseg prepares an xdr_stream and calls the
raid engins objio_alloc_lseg() to allocate a private
pnfs_layout_segment.
objio_osd.c::objio_alloc_lseg() uses passed xdr_stream to
decode and store the layout_segment information in an
objio_segment struct, using the pnfs_osd_xdr.h API for
the actual parsing the layout xdr.
objlayout_free_lseg calls objio_free_lseg() to free the
allocated space.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
[removed "extern" from function definitions] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Benny Halevy [Sun, 22 May 2011 16:49:32 +0000 (19:49 +0300)]
pnfs-obj: pnfs_osd XDR definitions
* Add the pnfs_osd_xdr.h header
* defintions the pnfs_osd_layout structure including all it's
sub-types and constants.
* Declare the pnfs_osd_xdr_decode_layout API + all needed
inline helpers.
* Define the pnfs_osd_deviceaddr structure and all its subtypes and
constants.
* Declare API for decoding of a pnfs_osd_deviceaddr from XDR stream.
* Define the pnfs_osd_ioerr structure, its substructures and constants.
* Declare API for encoding of a pnfs_osd_ioerr into XDR stream.
* Define the pnfs_osd_layoutupdate structure and its substructures.
* Declare API for encoding of a pnfs_osd_layoutupdate into XDR stream.
Benny Halevy [Sun, 22 May 2011 16:49:06 +0000 (19:49 +0300)]
pnfs-obj: objlayoutdriver module skeleton
* Define the PNFS_OBJLAYOUT Kconfig option in the nfs
master Kconfig file.
* Add the objlayout driver to the Kernel's Kbuild system.
* Add the fs/nfs/objlayout/Kbuild file for building the
objlayoutdriver.ko driver
* Define fs/nfs/objlayout/objio_osd.c, register the driver on module
initialization and unregister on exit.
[pnfs-obj: remove of CONFIG_PNFS fallout] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[added "unsure" clause]
[depend on NFS_V4_1] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
J. Bruce Fields [Sun, 22 May 2011 16:48:21 +0000 (19:48 +0300)]
pnfs: client stats
A pNFS client auto-negotiates a lot of features (minorversion level,
pNFS layout type, etc.). This is convenient, but makes certain kinds of
failures hard for a user to detect.
For example, if the client falls back on 4.0, or falls back to MDS IO
because the user didn't connect to the right iscsi disks before
mounting, the only symptoms may be reduced performance, which may not be
noticed till long after the actual failure, and may be difficult for a
user to diagnose.
However, such "failures" may also be perfectly normal in some cases, so
we don't want to spam the system logs with them.
One approach would be to put some more information into
/proc/self/mountstats.
Signed-off-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: add commit client stats]
[fixup data types for "ret" variables in pnfs_try_to* inline funcs.] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[fix definition of show_pnfs for !CONFIG_PNFS] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Fix show_sessions in the not CONFIG_NFS_V4_1 case]
There is a build error when CONFIG_NFS_V4 is set but
CONFIG_NFS_V4_1 is *not* set. show_sessions() prototype
was unbalanced between the two cases. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[pnfs: super.c remove CONFIG_PNFS] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Benny Halevy [Tue, 24 May 2011 15:04:02 +0000 (18:04 +0300)]
NFSv4.1: use layout driver in global device cache
pnfs deviceids are unique per server, per layout type.
struct nfs_client is currently used to distinguish deviceids from
different nfs servers, yet these may clash between different layout
types on the same server. Therefore, use the layout driver associated
with each deviceid at insertion time to look it up, unhash, or
delete it.
Marc Eshel [Sun, 22 May 2011 16:47:09 +0000 (19:47 +0300)]
pnfs: CB_NOTIFY_DEVICEID
Note: This functionlaity is incomplete as all layout segments referring to
the 'to be removed device id' need to be reaped, and all in flight I/O drained.
[use be32 res in nfs4_callback_devicenotify]
[use nfs_client to qualify deviceid for cb_notify_deviceid]
[use global deviceid cache for CB_NOTIFY_DEVICEID]
[refactor device cache _lookup_deviceid]
[refactor device cache _find_get_deviceid] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Bug in new global-device-cache code]
[layout_driver MUST set free_deviceid_node if using dev-cache] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Tyler Hicks [Tue, 24 May 2011 07:16:51 +0000 (02:16 -0500)]
eCryptfs: Cleanup inode initialization code
The eCryptfs inode get, initialization, and dentry interposition code
has two separate paths. One is for when dentry interposition is needed
after doing things like a mkdir in the lower filesystem and the other
is needed after a lookup. Unlocking new inodes and doing a d_add() needs
to happen at different times, depending on which type of dentry
interposing is being done.
This patch cleans up the inode get and initialization code paths and
splits them up so that the locking and d_add() differences mentioned
above can be handled appropriately in a later patch.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Tested-by: David <david@unsolicited.net>
Benny Halevy [Fri, 20 May 2011 11:47:33 +0000 (13:47 +0200)]
NFSv4.1: purge deviceid cache on nfs_free_client
Use the pnfs_layoutdriver_type both as a qualifier for the deviceid,
distinguishing deviceid from different layout types on the server,
and for freeing the layout-driver allocated structure containing the
nfs4_deviceid_node.
[BUG in _deviceid_purge_client]
[layout_driver MUST set free_deviceid_node if using dev-cache]
[let ver < 4.1 compile] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[removed EXPORT_SYMBOL_GPL(nfs4_deviceid_purge_client)] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Mikulas Patocka [Sun, 29 May 2011 12:03:11 +0000 (13:03 +0100)]
dm kcopyd: reserve fewer pages
Reserve just the minimum of pages needed to process one job.
Because we allocate pages from page allocator, we don't need to reserve
a large number of pages. The maximum job size is SUB_JOB_SIZE and we
calculate the number of reserved pages based on this.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Sun, 29 May 2011 12:03:09 +0000 (13:03 +0100)]
dm io: use fixed initial mempool size
Replace the arbitrary calculation of an initial io struct mempool size
with a constant.
The code calculated the number of reserved structures based on the request
size and used a "magic" multiplication constant of 4. This patch changes
it to reserve a fixed number - itself still chosen quite arbitrarily.
Further testing might show if there is a better number to choose.
Note that if there is no memory pressure, we can still allocate an
arbitrary number of "struct io" structures. One structure is enough to
process the whole request.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Sun, 29 May 2011 12:03:07 +0000 (13:03 +0100)]
dm kcopyd: alloc pages from the main page allocator
This patch changes dm-kcopyd so that it allocates pages from the main
page allocator with __GFP_NOWARN | __GFP_NORETRY flags (so that it can
fail in case of memory pressure). If the allocation fails, dm-kcopyd
allocates pages from its own reserve.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Remove the spinlock protecting the pages allocation. The spinlock is only
taken on initialization or from single-threaded workqueue. Therefore, the
spinlock is useless.
The spinlock is taken in kcopyd_get_pages and kcopyd_put_pages.
kcopyd_get_pages is only called from run_pages_job, which is only
called from process_jobs called from do_work.
kcopyd_put_pages is called from client_alloc_pages (which is initialization
function) or from run_complete_job. run_complete_job is only called from
process_jobs called from do_work.
Another spinlock, kc->job_lock is taken each time someone pushes or pops
some work for the worker thread. Once we take kc->job_lock, we
guarantee that any written memory is visible to the other CPUs.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Sun, 29 May 2011 12:03:00 +0000 (13:03 +0100)]
dm kcopyd: preallocate sub jobs to avoid deadlock
There's a possible theoretical deadlock in dm-kcopyd because multiple
allocations from the same mempool are required to finish a request.
Avoid this by preallocating sub jobs.
There is a mempool of 512 entries. Each request requires up to 9
entries from the mempool. If we have at least 57 concurrent requests
running, the mempool may overflow and mempool allocations may start
blocking until another entry is freed to the mempool. Because the same
thread is used to free entries to the mempool and allocate entries from
the mempool, this may result in a deadlock.
This patch changes it so that one mempool entry contains all 9 "struct
kcopyd_job" required to fulfill the whole request. The allocation is
done only once in dm_kcopyd_copy and no further mempool allocations are
done during request processing.
If dm_kcopyd_copy is not run in the completion thread, this
implementation is deadlock-free.
MIN_JOBS needs reducing accordingly and we've chosen to reduce it
further to 8.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Sun, 29 May 2011 12:02:58 +0000 (13:02 +0100)]
dm kcopyd: avoid pointless job splitting
Don't split SUB_JOB_SIZE jobs
If the job size equals SUB_JOB_SIZE, there is no point in splitting it.
Splitting it just unnecessarily wastes time, because the split job size
is SUB_JOB_SIZE too.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
dm mpath: do not fail paths after integrity errors
Integrity errors need to be passed to the owner of the integrity
metadata for processing. Consequently EILSEQ should be passed up the
stack.
Cc: stable@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Milan Broz [Sun, 29 May 2011 12:02:52 +0000 (13:02 +0100)]
dm table: reject devices without request fns
This patch adds a check that a block device has a request function
defined before it is used. Otherwise, misconfiguration can cause an oops.
Because we are allowing devices with zero size e.g. an offline multipath
device as in commit 2cd54d9bedb79a97f014e86c0da393416b264eb3
("dm: allow offline devices") there needs to be an additional check
to ensure devices are initialised. Some block devices, like a loop
device without a backing file, exist but have no request function.
Reproducer is trivial: dm-mirror on unbound loop device
(no backing file on loop devices)
Heiko Carstens [Sun, 29 May 2011 10:40:51 +0000 (12:40 +0200)]
[S390] mm: fix mmu_gather rework
Quite a few functions that get called from the tlb gather code require that
preemption must be disabled. So disable preemption inside of the called
functions instead.
The only drawback is that rcu_table_freelist_finish() doesn't get necessarily
called on the cpu(s) that filled the free lists. So we may see a delay, until
we finally see an rcu callback. However over time this shouldn't matter.
So we get rid of lots of "BUG: using smp_processor_id() in preemptible"
messages.
Heiko Carstens [Sun, 29 May 2011 10:40:50 +0000 (12:40 +0200)]
[S390] mm: fix storage key handling
page_get_storage_key() and page_set_storage_key() expect a page address
and not its page frame number. This got inconsistent with 2d42552d
"[S390] merge page_test_dirty and page_clear_dirty".
Result is that we read/write storage keys from random pages and do not
have a working dirty bit tracking at all.
E.g. SetPageUpdate() doesn't clear the dirty bit of requested pages, which
for example ext4 doesn't like very much and panics after a while.
Benny Halevy [Fri, 20 May 2011 08:45:05 +0000 (10:45 +0200)]
NFSv4.1: use struct nfs_client to qualify deviceid
deviceids are unique per server, per layout type.
Therefore, in the global cache in the files layout driver
deviceids from different servers may clash so we need
to qualify them with a struct nfs_client that represents
the nfs server that returned the deviceid.
Introduced in 2.6.39 commit ea8eecdd
"NFSv4.1 move deviceid cache to filelayout driver"
Len Brown [Fri, 1 Apr 2011 19:46:09 +0000 (15:46 -0400)]
x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param
mwait_idle() is a C1-only idle loop intended to be more efficient
than HLT on SMP hardware that supports it.
But mwait_idle() has been replaced by the more general
mwait_idle_with_hints(), which handles both C1 and deeper C-states.
ACPI uses only mwait_idle_with_hints(), and never uses mwait_idle().
Deprecate mwait_idle() and the "idle=mwait" cmdline param
to simplify the x86 idle code.
After this change, kernels configured with
(!CONFIG_ACPI=n && !CONFIG_INTEL_IDLE=n) when run on hardware
that support MWAIT will simply use HLT. If MWAIT is desired
on those systems, cpuidle and the cpuidle drivers above
can be used.
cc: x86@kernel.org
cc: stable@kernel.org # .39.x Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 1 Apr 2011 19:41:17 +0000 (15:41 -0400)]
x86 idle: deprecate "no-hlt" cmdline param
We'd rather that modern machines not check if HLT works on
every entry into idle, for the benefit of machines that had
marginal electricals 15-years ago. If those machines are still running
the upstream kernel, they can use "idle=poll". The only difference
will be that they'll now invoke HLT in machine_hlt().
cc: x86@kernel.org # .39.x Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 1 Apr 2011 19:19:23 +0000 (15:19 -0400)]
x86 idle APM: deprecate CONFIG_APM_CPU_IDLE
We don't want to export the pm_idle function pointer to modules.
Currently CONFIG_APM_CPU_IDLE w/ CONFIG_APM_MODULE forces us to.
CONFIG_APM_CPU_IDLE is of dubious value, it runs only on 32-bit
uniprocessor laptops that are over 10 years old. It calls into
the BIOS during idle, and is known to cause a number of machines
to fail.
Removing CONFIG_APM_CPU_IDLE and will allow us to stop exporting
pm_idle. Any systems that were calling into the APM BIOS
at run-time will simply use HLT instead.
cc: x86@kernel.org
cc: Jiri Kosina <jkosina@suse.cz>
cc: stable@kernel.org # .39.x Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 1 Apr 2011 19:28:09 +0000 (15:28 -0400)]
x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it
In the long run, we don't want default_idle() or (pm_idle)() to
be exported outside of process.c. Start by not exporting them
to modules, unless the APM build demands it.
cc: x86@kernel.org
cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 1 Apr 2011 20:59:53 +0000 (16:59 -0400)]
x86 idle: clarify AMD erratum 400 workaround
The workaround for AMD erratum 400 uses the term "c1e" falsely suggesting:
1. Intel C1E is somehow involved
2. All AMD processors with C1E are involved
Use the string "amd_c1e" instead of simply "c1e" to clarify that
this workaround is specific to AMD's version of C1E.
Use the string "e400" to clarify that the workaround is specific
to AMD processors with Erratum 400.
This patch is text-substitution only, with no functional change.
cc: x86@kernel.org Acked-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
Lin Ming [Wed, 4 May 2011 14:56:43 +0000 (22:56 +0800)]
ACPI: Add D3 cold state
_SxW returns an Integer containing the lowest D-state supported in state
Sx. If OSPM has not indicated that it supports _PR3, then the value “3”
corresponds to D3. If it has indicated _PR3 support, the value “3”
represents D3hot and the value “4” represents D3cold.
Linux does set _OSC._PR3, so we should fix it to expect that _SxW can
return 4.
Signed-off-by: Lin Ming <ming.m.lin@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Len Brown <len.brown@intel.com>
In UP kernel, acpi_get_cpuid(...) always return -1 and
num_possible_cpus() always return 1, so
processor_physically_present(...) always returns true for all passed in
processor handles.
This is wrong for UP processor or SMP processor running UP kernel.
This patch removes the !SMP version of acpi_get_cpuid(), so both UP and
SMP kernel use the same acpi_get_cpuid function.
Tested-by: Anton Kochkov <anton.kochkov@gmail.com> Tested-by: Ambroz Bizjak <ambrop7@gmail.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Sun, 29 May 2011 06:12:28 +0000 (23:12 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
Blackfin: debug-mmrs: include RSI_PID[4567] MMRs
Blackfin: bf51x: fix up RSI_PID# MMR defines
Blackfin: bf52x/bf54x: fix up usb MMR defines
Blackfin: debug-mmrs: fix typos with gptimers/mdma/ppi
Blackfin: gptimers: add structure for hardware register layout
Blackfin: wire up new sendmmsg syscall
Blackfin: mach/bfin_serial_5xx.h: punt now-unused header
Blackfin: bfin_serial.h: turn default port wrappers into stubs
Randy Dunlap [Sun, 29 May 2011 00:26:40 +0000 (17:26 -0700)]
scsi: fix scsi_proc new kernel-doc warning
Fix kernel-doc warnings in scsi_proc.c:
Warning(drivers/scsi/scsi_proc.c:390): No description found for parameter 'dev'
Warning(drivers/scsi/scsi_proc.c:390): No description found for parameter 'data'
Warning(drivers/scsi/scsi_proc.c:390): Excess function parameter 's' description in 'always_match'
Warning(drivers/scsi/scsi_proc.c:390): Excess function parameter 'p' description in 'always_match'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Renninger [Thu, 26 May 2011 10:26:24 +0000 (12:26 +0200)]
ACPI: Split out custom_method functionality into an own driver
With /sys/kernel/debug/acpi/custom_method root can write
to arbitrary memory and increase his priveleges, even if
these are restricted.
-> Make this an own debug .config option and warn about the
security issue in the config description.
-> Still keep acpi/debugfs.c which now only creates an empty
/sys/kernel/debug/acpi directory. There might be other
users of it later.
Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: rui.zhang@intel.com Signed-off-by: Len Brown <len.brown@intel.com>
Thomas Renninger [Thu, 26 May 2011 10:26:23 +0000 (12:26 +0200)]
ACPI: Cleanup custom_method debug stuff
- Move param aml_debug_output to other params into sysfs.c
- Split acpi_debugfs_init to prepare custom_method to be
an own .config option and driver.
Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: rui.zhang@intel.com Signed-off-by: Len Brown <len.brown@intel.com>
Tim Chen [Fri, 11 Feb 2011 20:49:04 +0000 (12:49 -0800)]
idle governor: Avoid lock acquisition to read pm_qos before entering idle
Thanks to the reviews and comments by Rafael, James, Mark and Andi.
Here's version 2 of the patch incorporating your comments and also some
update to my previous patch comments.
I noticed that before entering idle state, the menu idle governor will
look up the current pm_qos target value according to the list of qos
requests received. This look up currently needs the acquisition of a
lock to access the list of qos requests to find the qos target value,
slowing down the entrance into idle state due to contention by multiple
cpus to access this list. The contention is severe when there are a lot
of cpus waking and going into idle. For example, for a simple workload
that has 32 pair of processes ping ponging messages to each other, where
64 cpu cores are active in test system, I see the following profile with
37.82% of cpu cycles spent in contention of pm_qos_lock:
A better approach will be to cache the updated pm_qos target value so
reading it does not require lock acquisition as in the patch below.
With this patch the contention for pm_qos_lock is removed and I saw a
2.2X increase in throughput for my message passing workload.
cc: stable@kernel.org Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Acked-by: mark gross <markgross@thegnar.org> Signed-off-by: Len Brown <len.brown@intel.com>
Tero Kristo [Thu, 24 Feb 2011 15:19:23 +0000 (17:19 +0200)]
cpuidle: menu: fixed wrapping timers at 4.294 seconds
Cpuidle menu governor is using u32 as a temporary datatype for storing
nanosecond values which wrap around at 4.294 seconds. This causes errors
in predicted sleep times resulting in higher than should be C state
selection and increased power consumption. This also breaks cpuidle
state residency statistics.
cc: stable@kernel.org # .32.x through .39.x Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Len Brown <len.brown@intel.com>
Hugh Dickins [Sat, 28 May 2011 20:20:21 +0000 (13:20 -0700)]
mm: fix page_lock_anon_vma leaving mutex locked
On one machine I've been getting hangs, a page fault's anon_vma_prepare()
waiting in anon_vma_lock(), other processes waiting for that page's lock.
This is a replay of last year's f18194275c39 "mm: fix hang on
anon_vma->root->lock".
The new page_lock_anon_vma() places too much faith in its refcount: when
it has acquired the mutex_trylock(), it's possible that a racing task in
anon_vma_alloc() has just reallocated the struct anon_vma, set refcount
to 1, and is about to reset its anon_vma->root.
Fix this by saving anon_vma->root, and relying on the usual page_mapped()
check instead of a refcount check: if page is still mapped, the anon_vma
is still ours; if page is not still mapped, we're no longer interested.
Hugh Dickins [Sat, 28 May 2011 20:17:04 +0000 (13:17 -0700)]
mm: fix kernel BUG at mm/rmap.c:1017!
I've hit the "address >= vma->vm_end" check in do_page_add_anon_rmap()
just once. The stack showed khugepaged allocation trying to compact
pages: the call to page_add_anon_rmap() coming from remove_migration_pte().
That path holds anon_vma lock, but does not hold mmap_sem: it can
therefore race with a split_vma(), and in commit 5f70b962ccc2 "mmap:
avoid unnecessary anon_vma lock" we just took away the anon_vma lock
protection when adjusting vma->vm_end.
I don't think that particular BUG_ON ever caught anything interesting,
so better replace it by a comment, than reinstate the anon_vma locking.
Hugh Dickins [Sat, 28 May 2011 20:14:09 +0000 (13:14 -0700)]
tmpfs: fix race between truncate and writepage
While running fsx on tmpfs with a memhog then swapoff, swapoff was hanging
(interruptibly), repeatedly failing to locate the owner of a 0xff entry in
the swap_map.
Although shmem_writepage() does abandon when it sees incoming page index
is beyond eof, there was still a window in which shmem_truncate_range()
could come in between writepage's dropping lock and updating swap_map,
find the half-completed swap_map entry, and in trying to free it,
leave it in a state that swap_shmem_alloc() could not correct.
Arguably a bug in __swap_duplicate()'s and swap_entry_free()'s handling
of the different cases, but easiest to fix by moving swap_shmem_alloc()
under cover of the lock.
More interesting than the bug: it's been there since 2.6.33, why could
I not see it with earlier kernels? The mmotm of two weeks ago seems to
have some magic for generating races, this is just one of three I found.
With yesterday's git I first saw this in mainline, bisected in search of
that magic, but the easy reproducibility evaporated. Oh well, fix the bug.
Mike Frysinger [Thu, 26 May 2011 22:07:11 +0000 (18:07 -0400)]
Blackfin: debug-mmrs: include RSI_PID[4567] MMRs
The documentation is a little iffy as to whether these are actual MMRs,
but reading them on the hardware works, and the previous version of this
logic (the SDH) had PID[4567]. So add it for RSI too.
Mike Frysinger [Thu, 26 May 2011 22:05:15 +0000 (18:05 -0400)]
Blackfin: bf51x: fix up RSI_PID# MMR defines
Looks like the copying of MMR defines from the SDH block missed updating
the addresses of the RSI_PID# registers. So tweak them to reflect the
actual hardware.
projects / mirror_ubuntu-bionic-kernel.git / log