]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Fri, 11 Dec 2009 23:24:56 +0000 (15:24 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (27 commits)
  Driver core: fix race in dev_driver_string
  Driver Core: Early platform driver buffer
  sysfs: sysfs_setattr remove unnecessary permission check.
  sysfs: Factor out sysfs_rename from sysfs_rename_dir and sysfs_move_dir
  sysfs: Propagate renames to the vfs on demand
  sysfs: Gut sysfs_addrm_start and sysfs_addrm_finish
  sysfs: In sysfs_chmod_file lazily propagate the mode change.
  sysfs: Implement sysfs_getattr & sysfs_permission
  sysfs: Nicely indent sysfs_symlink_inode_operations
  sysfs: Update s_iattr on link and unlink.
  sysfs: Fix locking and factor out sysfs_sd_setattr
  sysfs: Simplify iattr time assignments
  sysfs: Simplify sysfs_chmod_file semantics
  sysfs: Use dentry_ops instead of directly playing with the dcache
  sysfs: Rename sysfs_d_iput to sysfs_dentry_iput
  sysfs: Update sysfs_setxattr so it updates secdata under the sysfs_mutex
  debugfs: fix create mutex racy fops and private data
  Driver core: Don't remove kobjects in device_shutdown.
  firmware_class: make request_firmware_nowait more useful
  Driver-Core: devtmpfs - set root directory mode to 0755
  ...

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Fri, 11 Dec 2009 23:22:55 +0000 (15:22 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (122 commits)
  USB: mos7840: add device IDs for B&B electronics devices
  USB: ftdi_sio: add USB device ID's for B&B Electronics line
  USB: musb: musb_host: fix sparse warning
  USB: musb: musb_gadget: fix sparse warning
  USB: musb: omap2430: fix sparse warning
  USB: core: message: fix sparse warning
  USB: core: hub: fix sparse warning
  USB: core: fix sparse warning for static function
  USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS
  USB: Check bandwidth when switching alt settings.
  USB: Refactor code to find alternate interface settings.
  USB: xhci: Fix command completion after a drop endpoint.
  USB: xhci: Make reverting an alt setting "unfailable".
  USB: usbtmc: Use usb_clear_halt() instead of custom code.
  USB: xhci: Add correct email and files to MAINTAINERS entry.
  USB: ehci-omap.c: introduce missing kfree
  USB: xhci-mem.c: introduce missing kfree
  USB: add remove_id sysfs attr for usb drivers
  USB: g_multi kconfig: fix depends and help text
  USB: option: add pid for ZTE
  ...

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Fri, 11 Dec 2009 23:22:27 +0000 (15:22 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: handle receive packets with a data length of zero

14 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Fri, 11 Dec 2009 23:19:56 +0000 (15:19 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: Always process the whole breakpoint list on activate or deactivate
  kgdb: continue and warn on signal passing from gdb
  kgdb,x86: do not set kgdb_single_step on x86
  kgdb: allow for cpu switch when single stepping
  kgdb,i386: Fix corner case access to ss with NMI watch dog exception
  kgdb: Replace strstr() by strchr() for single-character needles
  kgdbts: Read buffer overflow
  kgdb: Read buffer overflow
  kgdb,x86: remove redundant test

14 years agoMerge branch 'drm-nouveau-pony' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 11 Dec 2009 22:32:49 +0000 (14:32 -0800)]
Merge branch 'drm-nouveau-pony' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-nouveau-pony' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/nouveau: Add DRM driver for NVIDIA GPUs

14 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 11 Dec 2009 22:32:30 +0000 (14:32 -0800)]
Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/ttm: export some functions useful to drivers using ttm
  drm/radeon/kms/avivo: fix typo in new_pll module description
  drm/radeon/kms: Convert radeon to new ttm_bo_init
  drm/ttm: Convert ttm_buffer_object_init to use ttm_placement

14 years agofirewire: ohci: handle receive packets with a data length of zero
Jay Fenlason [Fri, 11 Dec 2009 19:23:58 +0000 (14:23 -0500)]
firewire: ohci: handle receive packets with a data length of zero

Queueing to receive an ISO packet with a payload length of zero
silently does nothing in dualbuffer mode, and crashes the kernel in
packet-per-buffer mode.  Return an error in dualbuffer mode, because
the DMA controller won't let us do what we want, and work correctly in
packet-per-buffer mode.

Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: stable@kernel.org
14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/viro/mmap
Linus Torvalds [Fri, 11 Dec 2009 20:23:29 +0000 (12:23 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/viro/mmap

* git://git.kernel.org/pub/scm/linux/kernel/git/viro/mmap:
  Add missing alignment check in arch/score sys_mmap()
  fix broken aliasing checks for MAP_FIXED on sparc32, mips, arm and sh
  Get rid of open-coding in ia64_brk()
  sparc_brk() is not needed anymore
  switch do_brk() to get_unmapped_area()
  Take arch_mmap_check() into get_unmapped_area()
  fix a struct file leak in do_mmap_pgoff()
  Unify sys_mmap*
  Cut hugetlb case early for 32bit on ia64
  arch_mmap_check() on mn10300
  Kill ancient crap in s390 compat mmap
  arm: add arch_mmap_check(), get rid of sys_arm_mremap()
  file ->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()
  kill useless checks in sparc mremap variants
  fix pgoff in "have to relocate" case of mremap()
  fix the arch checks in MREMAP_FIXED case
  fix checks for expand-in-place mremap
  do_mremap() untangling, part 3
  do_mremap() untangling, part 2
  untangling do_mremap(), part 1

14 years agoMerge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Fri, 11 Dec 2009 20:18:16 +0000 (12:18 -0800)]
Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (109 commits)
  PCI: fix coding style issue in pci_save_state()
  PCI: add pci_request_acs
  PCI: fix BUG_ON triggered by logical PCIe root port removal
  PCI: remove ifdefed pci_cleanup_aer_correct_error_status
  PCI: unconditionally clear AER uncorr status register during cleanup
  x86/PCI: claim SR-IOV BARs in pcibios_allocate_resource
  PCI: portdrv: remove redundant definitions
  PCI: portdrv: remove unnecessary struct pcie_port_data
  PCI: portdrv: minor cleanup for pcie_port_device_register
  PCI: portdrv: add missing irq cleanup
  PCI: portdrv: enable device before irq initialization
  PCI: portdrv: cleanup service irqs initialization
  PCI: portdrv: check capabilities first
  PCI: portdrv: move PME capability check
  PCI: portdrv: remove redundant pcie type calculation
  PCI: portdrv: cleanup pcie_device registration
  PCI: portdrv: remove redundant pcie_port_device_probe
  PCI: Always set prefetchable base/limit upper32 registers
  PCI: read-modify-write the pcie device control register when initiating pcie flr
  PCI: show dma_mask bits in /sys
  ...

Fixed up conflicts in:
arch/x86/kernel/amd_iommu_init.c
drivers/pci/dmar.c
drivers/pci/hotplug/acpiphp_glue.c

14 years agoUSB: mos7840: add device IDs for B&B electronics devices
Cliff Brake [Tue, 1 Dec 2009 14:53:43 +0000 (09:53 -0500)]
USB: mos7840: add device IDs for B&B electronics devices

Reviewed-by: John Pilles <jpilles@bb-elec.com>
Signed-off-by: Cliff Brake <cbrake@bec-systems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: ftdi_sio: add USB device ID's for B&B Electronics line
Cliff Brake [Tue, 1 Dec 2009 14:53:42 +0000 (09:53 -0500)]
USB: ftdi_sio: add USB device ID's for B&B Electronics line

Reviewed-by: John Pilles <jpilles@bb-elec.com>
Signed-off-by: Cliff Brake <cbrake@bec-systems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: musb_host: fix sparse warning
Felipe Balbi [Fri, 4 Dec 2009 13:47:47 +0000 (15:47 +0200)]
USB: musb: musb_host: fix sparse warning

Fix the following sparse warning:

drivers/usb/musb/musb_host.c:1642:9: warning: symbol 'status' shadows an earlier one

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: musb_gadget: fix sparse warning
Felipe Balbi [Fri, 4 Dec 2009 13:47:46 +0000 (15:47 +0200)]
USB: musb: musb_gadget: fix sparse warning

Fix the following sparse warnings:

drivers/usb/musb/musb_gadget.c:1161:5: warning: symbol 'musb_gadget_set_halt' was not declared. Should it be static?

drivers/usb/musb/musb_gadget.c:1244:5: warning: symbol 'musb_gadget_set_wedge' was not declared. Should it be static?

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: omap2430: fix sparse warning
Felipe Balbi [Fri, 4 Dec 2009 13:47:45 +0000 (15:47 +0200)]
USB: musb: omap2430: fix sparse warning

Fix the following sparse warning:

drivers/usb/musb/omap2430.c:314:16: warning: Using plain integer as NULL pointer

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: core: message: fix sparse warning
Felipe Balbi [Fri, 4 Dec 2009 13:47:44 +0000 (15:47 +0200)]
USB: core: message: fix sparse warning

Fix the following sparse warning:

drivers/usb/core/message.c:1583:6: warning: symbol '__usb_queue_reset_device' was not declared. Should it be static?

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: core: hub: fix sparse warning
Felipe Balbi [Fri, 4 Dec 2009 13:47:43 +0000 (15:47 +0200)]
USB: core: hub: fix sparse warning

Fix the following sparse warning:

drivers/usb/core/hub.c:1664:37: warning: Using plain integer as NULL pointer

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: core: fix sparse warning for static function
Felipe Balbi [Fri, 4 Dec 2009 13:47:42 +0000 (15:47 +0200)]
USB: core: fix sparse warning for static function

Fix the following sparse warning:

drivers/usb/core/usb.c:1033:15: warning: symbol 'usb_debug_devices' was not declared. Should it be static?

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS
Michal Nazarewicz [Mon, 30 Nov 2009 09:55:40 +0000 (10:55 +0100)]
USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS

If g_ether and g_multi are both built CONFIG_USB_ETH_RNDIS symbol
may be redefined in the later and, whats even worse, g_ether's settings
may affect g_multi's.  This adds a USB_ETH_RNDIS symbol defined at the
beginning of ether.c and multi.c according toproper KConfig settings.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: Check bandwidth when switching alt settings.
Sarah Sharp [Thu, 3 Dec 2009 17:44:36 +0000 (09:44 -0800)]
USB: Check bandwidth when switching alt settings.

Make the USB core check the bandwidth when switching from one
interface alternate setting to another.  Also check the bandwidth
when resetting a configuration (so that alt setting 0 is used).  If
this check fails, the device's state is unchanged.  If the device
refuses the new alt setting, re-instate the old alt setting in the
host controller hardware.

If a USB device doesn't have an alternate interface setting 0, install
the first alt setting in its descriptors when a new configuration is
requested, or the device is reset.

Add a mutex per root hub to protect bandwidth operations:
adding/reseting/changing configurations, and changing alternate interface
settings.  We want to ensure that the xHCI host controller and the USB
device are set up for the same configurations and alternate settings.
There are two (possibly three) steps to do this:

 1. The host controller needs to check that bandwidth is available for a
    different setting, by issuing and waiting for a configure endpoint
    command.
 2. Once that returns successfully, a control message is sent to the
    device.
 3. If that fails, the host controller must be notified through another
    configure endpoint command.

The mutex is used to make these three operations seem atomic, to prevent
another driver from using more bandwidth for a different device while
we're in the middle of these operations.

While we're touching the bandwidth code, rename usb_hcd_check_bandwidth()
to usb_hcd_alloc_bandwidth().  This function does more than just check
that the bandwidth change won't exceed the bus bandwidth; it actually
changes the bandwidth configuration in the xHCI host controller.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: Refactor code to find alternate interface settings.
Sarah Sharp [Thu, 3 Dec 2009 17:44:34 +0000 (09:44 -0800)]
USB: Refactor code to find alternate interface settings.

Refactor out the code to find alternate interface settings into
usb_find_alt_setting().  Print a debugging message and return null if the
alt setting is not found.

While we're at it, correct a bug in the refactored code.  The interfaces
in the configuration's interface cache are not necessarily in numerical
order, so we can't just use the interface number as an array index.  Loop
through the interface caches, looking for the correct interface.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: xhci: Fix command completion after a drop endpoint.
Sarah Sharp [Thu, 3 Dec 2009 17:44:31 +0000 (09:44 -0800)]
USB: xhci: Fix command completion after a drop endpoint.

The xHCI driver issues a Configure Endpoint command for two reasons:
 - a new configuration or alternate interface setting is selected
 - a quirky Fresco Logic prototype requires the command after a Reset
   Endpoint command.
The xHCI driver only waits on the command in the first case.

When a configure endpoint command completes, the driver needs to know why
the command was generated.  When the driver only supported selecting an
initial configuration, the check was simple.  Unfortunately that check
doesn't work now that the driver supports alternate interfaces.  If an
endpoint must be dropped (because it's not in the new alternate setting)
and no new endpoints are added, the math involving
xhci_last_valid_endpoint() will assign -1 to an unsigned integer and cause
an out-of-bounds array access.

Move the check for the quirky hardware sooner and avoid the bad array
access.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: xhci: Make reverting an alt setting "unfailable".
Sarah Sharp [Thu, 3 Dec 2009 17:44:29 +0000 (09:44 -0800)]
USB: xhci: Make reverting an alt setting "unfailable".

When a driver wants to switch to a different alternate setting for an
interface, the USB core will (soon) check whether there is enough
bandwidth.  Once the new alternate setting is installed in the xHCI
hardware, the USB core will send a USB_REQ_SET_INTERFACE control
message.  That can fail in various ways, and the USB core needs to be
able to reinstate the old alternate setting.

With the old code, reinstating the old alt setting could fail if the
there's not enough memory to allocate new endpoint rings.  Keep
around a cache of (at most 31) endpoint rings for this case.  When we
successfully switch the xHCI hardware to the new alt setting, the old
alt setting's rings will be stored in the cache.  Therefore we'll
always have enough rings to satisfy a conversion back to a previous
device setting.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: usbtmc: Use usb_clear_halt() instead of custom code.
Sarah Sharp [Thu, 3 Dec 2009 19:35:59 +0000 (11:35 -0800)]
USB: usbtmc: Use usb_clear_halt() instead of custom code.

Make the USB Test & Measurement driver use usb_clear_halt() instead of
usb_control_msg() to clear a stalled endpoint.  This will allow devices to
be tested under an xHCI host controller.  The endpoint stall will not be
cleared in the internal xHCI hardware state unless usb_clear_halt() is
used.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Steve Holland <sdh4@iastate.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Jouni Ryno <Jouni.Ryno@fmi.fi>
Cc: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: xhci: Add correct email and files to MAINTAINERS entry.
Sarah Sharp [Tue, 1 Dec 2009 18:37:07 +0000 (10:37 -0800)]
USB: xhci: Add correct email and files to MAINTAINERS entry.

Add the xHCI driver files to its MAINTAINERS entry so that I'm Cc'd on
cleanup patches.  Update the email address to one I actually use for
sending patches and responding to Linux mailing list emails.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: ehci-omap.c: introduce missing kfree
Julia Lawall [Sat, 21 Nov 2009 11:52:17 +0000 (12:52 +0100)]
USB: ehci-omap.c: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: xhci-mem.c: introduce missing kfree
Julia Lawall [Sat, 21 Nov 2009 11:51:47 +0000 (12:51 +0100)]
USB: xhci-mem.c: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: add remove_id sysfs attr for usb drivers
CHENG Renquan [Sat, 21 Nov 2009 17:28:52 +0000 (01:28 +0800)]
USB: add remove_id sysfs attr for usb drivers

Accroding commit 0994375e, which is adding remove_id sysfs attr
for pci drivers, for management tools dynamically bind/unbind
a pci/usb devices to a specified drivers; with this patch,
the management tools can be simplied.

And the original code didn't handle the failure of
usb_create_newid_file, fixed in this patch.

Signed-off-by: CHENG Renquan <rqcheng@smu.edu.sg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_multi kconfig: fix depends and help text
Randy Dunlap [Sun, 6 Dec 2009 18:03:02 +0000 (10:03 -0800)]
USB: g_multi kconfig: fix depends and help text

USB_G_MULTI uses block and net interface functions, so make it
depend on both of those.  Otherwise there are lots of build errors.

Fix USB_G_MULTI config help text typos and copy/paste error.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: option: add pid for ZTE
zhao.ming9@zte.com.cn [Mon, 7 Dec 2009 03:36:34 +0000 (11:36 +0800)]
USB: option: add pid for ZTE

This patch adds ZTE modem devices.

Signed-off-by: Ming Zhao <zhao.ming9@zte.com.cn>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: wusb: correctly check size of security descriptor.
David Vrabel [Mon, 7 Dec 2009 13:50:41 +0000 (13:50 +0000)]
USB: wusb: correctly check size of security descriptor.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: wusb: don't leak urb in certain error cases
David Vrabel [Mon, 7 Dec 2009 13:50:40 +0000 (13:50 +0000)]
USB: wusb: don't leak urb in certain error cases

Don't leak an urb in wusb_dev_alloc() if the following kmalloc() failed.

Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: whci-hcd: correctly handle sg lists longer than QTD_MAX_XFER_SIZE.
David Vrabel [Mon, 7 Dec 2009 13:50:39 +0000 (13:50 +0000)]
USB: whci-hcd: correctly handle sg lists longer than QTD_MAX_XFER_SIZE.

When building qTDs (sTDs) from a scatter-gather list, the length of the
qTD must be a multiple of wMaxPacketSize if the transfer continues into
another qTD.

This also fixes a link failure on configurations for 32 bit processors
with 64 bit dma_addr_t (e.g., CONFIG_HIGHMEM_64G).

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: usb-storage: fix bug in fill_inquiry
Alan Stern [Mon, 7 Dec 2009 21:47:43 +0000 (16:47 -0500)]
USB: usb-storage: fix bug in fill_inquiry

This patch (as1312) fixes a minor bug in usb-storage.  The
fill_inquiry() routine neglects to pre-load the inquiry data buffer
with spaces.  As a result, if the vendor name is shorter than 8
characters or the product name is shorter than 16, the remainder will
be filled with garbage.

The patch also removes some unnecessary calls to strlen().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: usb-storage: add BAD_SENSE flag
Alan Stern [Mon, 7 Dec 2009 21:39:16 +0000 (16:39 -0500)]
USB: usb-storage: add BAD_SENSE flag

This patch (as1311) fixes a problem in usb-storage: Some devices are
pretty broken when it comes to reporting sense data.  The information
they send back indicates that they have more than 18 bytes of sense
data available, but when the system asks for more than 18 they fail or
hang.  The symptom is that probing fails with multiple resets.

The patch adds a new BAD_SENSE flag to indicate that usb-storage
should never ask for more than 18 bytes of sense data.  The flag can
be set in an unusual_devs entry or via the "quirks=" module parameter,
and it is set automatically whenever a REQUEST SENSE command for more
than 18 bytes fails or times out.

An unusual_devs entry is added for the Agfa photo frame, which uses a
Prolific chip having this bug.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Daniel Kukula <daniel.kuku@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: prepare for changover to Runtime PM framework
Alan Stern [Mon, 7 Dec 2009 18:01:37 +0000 (13:01 -0500)]
USB: prepare for changover to Runtime PM framework

This patch (as1303) revises the USB Power Management infrastructure to
make it compatible with the new driver-model Runtime PM framework:

Drivers are no longer allowed to access intf->pm_usage_cnt
directly; the PM framework manages its own usage counters.

usb_autopm_set_interface() is eliminated, because it directly
sets intf->pm_usage_cnt.

usb_autopm_enable() and usb_autopm_disable() are eliminated,
because they call usb_autopm_set_interface().

usb_autopm_get_interface_no_resume() and
usb_autopm_put_interface_no_suspend() are added.  They
correspond to pm_runtime_get_noresume() and
pm_runtime_put_noidle() in the PM framework.

The power/level attribute no longer accepts "suspend", only
"on" and "auto".  The PM framework doesn't allow devices to be
forced into a suspended mode.

The hub driver contains the only code that violates the new
guidelines.  It is updated to use the new interface routines instead.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: add devpath sysfs attribute
Greg Kroah-Hartman [Mon, 30 Nov 2009 19:15:02 +0000 (11:15 -0800)]
USB: add devpath sysfs attribute

This is not exported from the usb core, yet we rely on it to create
paths to interfaces for this device in sysfs.  Export it to make
userspace tools have an easier time to figure things out.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: twl4030: Enable USB regulators before enabling USB charging
Aguilar Pena, Leed [Fri, 20 Nov 2009 17:32:53 +0000 (11:32 -0600)]
USB: twl4030: Enable USB regulators before enabling USB charging

For TWL family of power management ICs, USB charging works only
when USB regulators are in enabled state: 3v1, 1v5, 1v8

On a USB cable attach, twl4030_phy_resume(twl) function enables
the regulators. Enable USB charging, only after all regulators
are enabled.

Its observed that enabling USB charging before regulators are
enabled, causes USB charging to fail.

Tested on: Zoom2: omap3430: ES3.1 + TWL5030
Needs T2-MADC and T2-BCI drivers which are still not upstreamed.

Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Leed Aguilar <leed.aguilar@ti.com>
Acked-by: Vikram Pandita <vikram.pandita@ti.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: usbtmc: repeat usb_bulk_msg until whole message is transfered
Andre Herms [Thu, 19 Nov 2009 17:14:49 +0000 (18:14 +0100)]
USB: usbtmc: repeat usb_bulk_msg until whole message is transfered

usb_bulk_msg() transfers only bytes up to the maximum packet size.
It must be repeated by the usbtmc driver until all bytes of a TMC message
are transfered.

Without this patch, ETIMEDOUT is reported when writing TMC messages
larger than the maximum USB bulk size and the transfer remains incomplete.
The user will notice that the device hangs and must be reset by either closing
the application or pulling the plug.

Signed-off-by: Andre Herms <andre.herms@tec-venture.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb_gadget: remove pointless loop
Sergei Shtylyov [Wed, 18 Nov 2009 19:55:28 +0000 (22:55 +0300)]
USB: musb_gadget: remove pointless loop

Remove the pointless 'do () while (0)' loop from musb_g_tx() -- it
makes this function symmetric to musb_g_rx()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb_gadget_ep0: stop abusing musb_gadget_set_halt()
Sergei Shtylyov [Wed, 18 Nov 2009 19:54:32 +0000 (22:54 +0300)]
USB: musb_gadget_ep0: stop abusing musb_gadget_set_halt()

Stop playing with musb->lock and abusing musb_gadget_set_halt() in
the code clearing the endpoint halt feature -- instead, manipulate
the registers directly.

While at it, get rid uf unneeded line breaks and over-indentation in
the code setting the endpoint halt feature.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb_gadget: implement set_wedge() method
Sergei Shtylyov [Wed, 18 Nov 2009 19:51:51 +0000 (22:51 +0300)]
USB: musb_gadget: implement set_wedge() method

Implement the driver's set_wedge() method by adding the 'wedged' flag
to the 'struct musb_ep'.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb_gadget_ep0: fix unhandled endpoint 0 IRQs, again
Sergei Shtylyov [Mon, 16 Nov 2009 10:54:05 +0000 (16:24 +0530)]
USB: musb_gadget_ep0: fix unhandled endpoint 0 IRQs, again

Commit a5073b52833e4df8e16c93dc4cbb7e0c558c74a2 (musb_gadget: fix
unhandled endpoint 0 IRQs) somehow missed its key change:

"The gadget EP0 code routinely ignores an interrupt at end of
the data phase because of musb_g_ep0_giveback() resetting the
state machine to "idle, waiting for SETUP" phase prematurely."

So, the majority of the cases of unhandled IRQs is still unfixed...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: MUSB: save hardware revision at init
Anand Gadiyar [Mon, 16 Nov 2009 15:39:21 +0000 (21:09 +0530)]
USB: MUSB: save hardware revision at init

MUSB: save hardware revision at init

This can be used later to flag workarounds for issues affecting
particular revisions. Saving this at init avoids having to
read the HWVERS register multiple times in code.

While at it, use macros to extract the version information
instead of using hardcoded values.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: fix printf warning in debug code
Mike Frysinger [Mon, 16 Nov 2009 10:49:29 +0000 (16:19 +0530)]
USB: musb: fix printf warning in debug code

The debug code in the DMA ISR uses a %d for a size_t when it should be
using %zu.  Otherwise gcc whines with:

drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq':
drivers/usb/musb/musbhsdma.c:288: warning: format '%d' expects type 'int',
but argument 7 has type 'size_t'

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: Blackfin code needs NOP_USB_XCEIV too
Cliff Cai [Tue, 17 Nov 2009 01:05:03 +0000 (20:05 -0500)]
USB: musb: Blackfin code needs NOP_USB_XCEIV too

Otherwise we get the link failure:
drivers/built-in.o: In function 'musb_platform_init':
drivers/usb/musb/blackfin.c:300: undefined reference to 'usb_nop_xceiv_register'
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: error out when anomaly 05000380 is applicable
Sonic Zhang [Mon, 16 Nov 2009 10:49:27 +0000 (16:19 +0530)]
USB: musb: error out when anomaly 05000380 is applicable

Since we can't work around anomaly 05000380, throw a build error up and
instruct the user to use a different mode.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: clear the Blackfin interrupt pending bits early in the ISR
Cliff Cai [Mon, 16 Nov 2009 10:49:26 +0000 (16:19 +0530)]
USB: musb: clear the Blackfin interrupt pending bits early in the ISR

If we clear the interrupt pending bits at the end, we sometimes return too
fast and have the same interrupt assert itself.  There is no way in a
Blackfin system to force a sync of this state, so the hardware manual
instructs people to clear interrupt flags early in their ISR.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: fix musb_platform_set_mode() definition
Bryan Wu [Mon, 16 Nov 2009 10:49:25 +0000 (16:19 +0530)]
USB: musb: fix musb_platform_set_mode() definition

Update function definition to match latest MUSB framework.

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: add work around for Blackfin anomaly 05000456
Sonic Zhang [Mon, 16 Nov 2009 10:49:24 +0000 (16:19 +0530)]
USB: musb: add work around for Blackfin anomaly 05000456

Only allow USE_MODE1 when the Blackfin part is not affected by anomaly
05000456 (USB Receive Interrupt Is Not Generated in DMA Mode 1) since we
can't support the mode in that case.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: add notes for Blackfin anomalies
Sonic Zhang [Mon, 16 Nov 2009 13:43:08 +0000 (19:13 +0530)]
USB: musb: add notes for Blackfin anomalies

Add some helpful notes about how the driver works around different
anomalies that exist in the on-chip host controller.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: update Blackfin processor dependency
Sonic Zhang [Tue, 17 Nov 2009 01:04:21 +0000 (20:04 -0500)]
USB: musb: update Blackfin processor dependency

Do not allow MUSB driver to be selected on derivatives that don't have the
MUSB controller on them.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: kill some useless comments in Blackfin driver
Bryan Wu [Mon, 16 Nov 2009 10:49:21 +0000 (16:19 +0530)]
USB: musb: kill some useless comments in Blackfin driver

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: kill compile warning for Blackfin systems
Bryan Wu [Mon, 16 Nov 2009 10:49:20 +0000 (16:19 +0530)]
USB: musb: kill compile warning for Blackfin systems

The Blackfin version of musb_read_target_reg_base() returns a u16 when the
common code expects a (void __iomem *), so update the Blackfin function to
return the right value.  This fixes the compile warning:

drivers/usb/musb/musb_core.c: In function 'musb_core_init':
drivers/usb/musb/musb_core.c:1448: warning: assignment makes pointer from
integer without a cast

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: musb: tweak musb_read_fifo() to avoid unused warnings
Mike Frysinger [Mon, 16 Nov 2009 10:49:19 +0000 (16:19 +0530)]
USB: musb: tweak musb_read_fifo() to avoid unused warnings

Otherwise gcc will whine about epnum/dma_reg being unused when building
for BF54x parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: xhci: Handle errors that cause endpoint halts.
Sarah Sharp [Wed, 11 Nov 2009 18:28:44 +0000 (10:28 -0800)]
USB: xhci: Handle errors that cause endpoint halts.

The xHCI 0.95 and 0.96 specification defines several transfer buffer
request completion codes that indicate a USB transaction error occurred.
When a stall, babble, transaction, or split transaction error completion code
is set, the xHCI has halted that endpoint ring.  Software must issue a
Reset Endpoint command and a Set Transfer Ring Dequeue Pointer command
to clean up the halted ring.

The USB device driver is supposed to call into usb_reset_endpoint() when
an endpoint stalls.  That calls into the xHCI driver to issue the proper
commands.  However, drivers don't call that function for the other
errors that cause the xHC to halt the endpoint ring.  If a babble,
transaction, or split transaction error occurs, check if the endpoint
context reports a halted condition, and clean up the endpoint ring if it
does.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: xhci: Return success for vendor-specific info codes.
Sarah Sharp [Wed, 11 Nov 2009 18:28:40 +0000 (10:28 -0800)]
USB: xhci: Return success for vendor-specific info codes.

An xHCI host controller manufacturer can choose to implement several
vendor-specific informational completion codes.  These are all to be
treated like a successful transfer completion.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: xhci: Return -EPROTO on a split transaction error.
Sarah Sharp [Wed, 11 Nov 2009 18:28:36 +0000 (10:28 -0800)]
USB: xhci: Return -EPROTO on a split transaction error.

When the xHCI hardware says a transfer completed with a split
transaction error, set the URB status to -EPROTO.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: xhci: Set transfer descriptor size field correctly.
Sarah Sharp [Wed, 11 Nov 2009 18:28:30 +0000 (10:28 -0800)]
USB: xhci: Set transfer descriptor size field correctly.

The transfer descriptor (TD) is a series of transfer request buffers
(TRBs) that describe the buffer pointer, length, and other
characteristics.  The xHCI controllers want to know an estimate of how
long the TD is, for caching reasons.  In each TRB, there is a "TD size"
field that provides a rough estimate of the remaining buffers to be
transmitted, including the buffer pointed to by that TRB.

The TD size is 5 bits long, and contains the remaining size in bytes,
right shifted by 10 bits.  So a remaining TD size less than 1024 would get
a zero in the TD size field, and a remaining size greater than 32767 would
get 31 in the field.

This patches fixes a bug in the TD_REMAINDER macro that is triggered when
the URB has a scatter gather list with a size bigger than 32767 bytes.
Not all host controllers pay attention to the TD size field, so the bug
will not appear on all USB 3.0 hosts.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_multi: Multifunction Composite Gadget added
Michal Nazarewicz [Mon, 9 Nov 2009 13:15:27 +0000 (14:15 +0100)]
USB: g_multi: Multifunction Composite Gadget added

The Multifunction Composite Gadget has two configurations
consisting of Ethernet (RNDIS in first and CDC Ethernet in
second configuration), CDC Serial and File-backed Storage
functions.

When connected to a Windows host, the first configuration
is chosen thus gadget provides RNDIS Ethernet, serial and
mass storage whereas when connected to Linux host, second
configuration is chosen thus providing CDC Ethernet,
serial and mass storage.

Which configurations are built can be configured via
KConfig options.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: thread_exits callback added
Michal Nazarewicz [Mon, 9 Nov 2009 13:15:26 +0000 (14:15 +0100)]
USB: g_mass_storage: thread_exits callback added

thread_exits callback has been added to fsg_common structure.
This callback is called when MSF's thread exits (is terminated
by a signal or function is unregistered).  It's then gadget's
responsibility to unregister the gadget.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: composite: usb_composite_unregister() no longer __exit
Michal Nazarewicz [Mon, 9 Nov 2009 13:15:25 +0000 (14:15 +0100)]
USB: composite: usb_composite_unregister() no longer __exit

Changed definition of usb_composite_unregister() function
removing __exit declaration.  This way, the function is
included even if the whole code was not compiled as module.
This is required if a compiled-in code would like to
unregister a composite gadget.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: most data moved to fsg_common
Michal Nazarewicz [Mon, 9 Nov 2009 13:15:24 +0000 (14:15 +0100)]
USB: g_mass_storage: most data moved to fsg_common

Most of the data from fsg_dev have been moved to fsg_common
structure.  The fsg_dev structure holds only endpoint dependent
data.  The fsg_common structure has a fsg pointer which points
to active fsg_dev structure -- endpoints are referenced via this
pointer.

This fixes the problem of several threads created when a single
instance of MSF is used in several USB configurations.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: code cleaned up and comments updated
Michal Nazarewicz [Mon, 9 Nov 2009 13:15:23 +0000 (14:15 +0100)]
USB: g_mass_storage: code cleaned up and comments updated

Fixed most of the errors and warnings in f_mass_storage.c and
storage_common.c reported by checkpatch.pl as well as updated
comments.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: lun_name_format and thread_name added
Michal Nazarewicz [Mon, 9 Nov 2009 13:15:22 +0000 (14:15 +0100)]
USB: g_mass_storage: lun_name_format and thread_name added

A two fsg_config fields were added:
* lun_name_format which lets one specify format of a name
  used when registering LUN devices.  It is useful if there
  would be ever need for two MSFs to be used in a single
  composite gadget (as opposed to single MSF in two
  configuration); and
* thread_name which lets one specify the name of a kernel
  thread used by MSF.  This is not required since two or more
  threads can have the same name but nevertheless it's here
  for consistency.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: fsg_config added & module params handlig changed
Michal Nazarewicz [Mon, 9 Nov 2009 13:15:21 +0000 (14:15 +0100)]
USB: g_mass_storage: fsg_config added & module params handlig changed

Removed all references to mod_data in f_mass_storage.c and
instead created fsg_config structure fsg_common_init() takes
as an argument -- it stores all configuration options that
were previously taken from mod_data.

Moreover, The fsg_config structure allows per-LUN
configuration of removable and CD-ROM emulation.

Module parameters are handled by defining an object of
fsg_module_parameters structure and then declaring module
parameters via FSG_MODULE_PARAMETERS() macro.  It adds proper
declarations to the code making specified object be populated
from module parameters.

To use values stored there one may use either
fsg_config_from_params() which will will a fsg_config structure
with values taken from fsg_module_parameters structure or
fsg_common_from_params() which will initialise fsg_common
structure directly.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: Mass Storage Function created
Michal Nazarewicz [Mon, 9 Nov 2009 13:15:20 +0000 (14:15 +0100)]
USB: g_mass_storage: Mass Storage Function created

The f_mass_storage.c has been changed into a composite function.
mass_storage.c file has been introduced which defines a
g_mass_storage gadget based on composite framework.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: xhci: Add tests for TRB address translation.
Sarah Sharp [Mon, 9 Nov 2009 21:35:23 +0000 (13:35 -0800)]
USB: xhci: Add tests for TRB address translation.

It's not surprising that the transfer request buffer (TRB) physical to
virtual address translation function has bugs in it, since I wrote most of
it at 4am last October.  Add a test suite to check the TRB math.  This
runs at memory initialization time, and causes the driver to fail to load
if the TRB math fails.

Please excuse the excessively long lines in the test vectors; they can't
really be made shorter and still be readable.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agousbtest: make module param pattern writeable
Vikram Pandita [Tue, 10 Nov 2009 03:24:32 +0000 (21:24 -0600)]
usbtest: make module param pattern writeable

Allow module_param to be writeable. This allows us to change
the parameter if usbtest is built-in in the kernel.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: fix possible null deref in init_usb_class()
Dan Carpenter [Tue, 10 Nov 2009 09:02:08 +0000 (11:02 +0200)]
USB: fix possible null deref in init_usb_class()

Add a missing goto.  We dereference usb_class on the next line.

Found by smatch static checker.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: r8a66597: clean up. remove unneeded null checks
Dan Carpenter [Tue, 10 Nov 2009 08:53:58 +0000 (10:53 +0200)]
USB: r8a66597: clean up. remove unneeded null checks

td and dev can not be null.

Also they are dereferenced in list_for_each_entry_safe and list_for_each
before the check happens so we would have an oops if it were possible
for them to be null.

Found using the smatch static checker.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: remove the auto_pm flag
Alan Stern [Fri, 13 Nov 2009 16:53:59 +0000 (11:53 -0500)]
USB: remove the auto_pm flag

This patch (as1302) removes the auto_pm flag from struct usb_device.
The flag's only purpose was to distinguish between autosuspends and
external suspends, but that information is now available in the
pm_message_t argument passed to suspend methods.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: hcd.c: quiet NULL pointer sparse noise
H Hartley Sweeten [Tue, 17 Nov 2009 22:53:41 +0000 (14:53 -0800)]
USB: hcd.c: quiet NULL pointer sparse noise

Quiet the following sparse noise:

  warning: Using plain integer as NULL pointer

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: option.c: add support for D-Link DWM-162-U5
Zhang Le [Tue, 17 Nov 2009 22:53:42 +0000 (14:53 -0800)]
USB: option.c: add support for D-Link DWM-162-U5

Add D-Link DWM-162-U5 device id 1e0e:ce16 into option driver.  The device
has 4 interfaces, of which 1 is handled by storage and the other 3 by
option driver.

The device appears first as CD-only 05c6:2100 device and must be switched
to 1e0e:ce16 mode either by using "eject CD" or usb_modeswitch.

The MessageContent for usb_modeswitch.conf is:
"55534243e0c26a85000000000000061b000000020000000000000000000000"

Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: ark3116: Cleanup of now unneeded functions
bart.hartgers@gmail.com [Wed, 28 Oct 2009 09:43:30 +0000 (10:43 +0100)]
USB: ark3116: Cleanup of now unneeded functions

Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com>
Cc: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: ark3116: Callbacks for interrupt and bulk read
bart.hartgers@gmail.com [Wed, 28 Oct 2009 09:43:29 +0000 (10:43 +0100)]
USB: ark3116: Callbacks for interrupt and bulk read

Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com>
Cc: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: ark3116: Add cmset and break
bart.hartgers@gmail.com [Wed, 28 Oct 2009 09:43:28 +0000 (10:43 +0100)]
USB: ark3116: Add cmset and break

Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com>
Cc: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: ark3116: Replace cmget
bart.hartgers@gmail.com [Wed, 28 Oct 2009 09:43:27 +0000 (10:43 +0100)]
USB: ark3116: Replace cmget

Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com>
Cc: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: ark3116: Make existing functions 16450-aware and add close and release functions.
bart.hartgers@gmail.com [Wed, 28 Oct 2009 09:43:26 +0000 (10:43 +0100)]
USB: ark3116: Make existing functions 16450-aware and add close and release functions.

Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com>
Cc: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: ark3116: Setup some basic infrastructure for new ark3116 driver.
bart.hartgers@gmail.com [Wed, 28 Oct 2009 09:43:25 +0000 (10:43 +0100)]
USB: ark3116: Setup some basic infrastructure for new ark3116 driver.

Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com>
Cc: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: Close usb_find_interface race
Russ Dill [Wed, 18 Nov 2009 18:02:13 +0000 (11:02 -0700)]
USB: Close usb_find_interface race

USB drivers that create character devices call usb_register_dev in their
probe function. This associates the usb_interface device with that minor
number and creates the character device and announces it to the world.
However, the driver's probe function is called before the new
usb_interface is added to the driver's klist_devices.

This is a problem because userspace will respond to the character device
creation announcement by opening the character device. The driver's open
function will the call usb_find_interface to find the usb_interface
associated with that minor number. usb_find_interface will walk the
driver's list of devices and find the usb_interface with the matching
minor number.

Because the announcement happens before the usb_interface is added to the
driver's klist_devices, a race condition exists. A straightforward fix
is to walk the list of devices on usb_bus_type instead since the device
is added to that list before the announcement occurs.

bus_find_device calls get_device to bump the reference count on the found
device. It is arguable that the reference count should be dropped by the
caller of usb_find_interface instead of usb_find_interface, however,
the current users of usb_find_interface do not expect this.

Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: FIX bitfield istl_flip:1, make it unsigned.
Roel Kluin [Wed, 18 Nov 2009 13:12:31 +0000 (14:12 +0100)]
USB: FIX bitfield istl_flip:1, make it unsigned.

istl_flip is a signed bitfield of one bit so it can be -1 or 0.
However in drivers/usb/host/isp1362-hcd.c:1103:

finish_iso_transfers(isp1362_hcd,
&isp1362_hcd->istl_queue[isp1362_hcd->istl_flip]);

So if isp1362_hcd->istl_flip is set, the 2nd argument becomes
&isp1362_hcd->istl_queue[-1], which is invalid.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: handle bcd incrementation in usb modalias generation
Nathaniel McCallum [Thu, 19 Nov 2009 01:15:28 +0000 (20:15 -0500)]
USB: handle bcd incrementation in usb modalias generation

This patch fixes a bug when incrementing/decrementing on a BCD formatted
integer (i.e. 0x09++ should be 0x10 not 0x0A).  It just adds a function
for incrementing/decrementing BCD integers by converting to decimal,
doing the increment/decrement and then converting back to BCD.

Signed-off-by: Nathaniel McCallum <nathaniel@natemccallum.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: add hex/bcd detection to usb modalias generation
Nathaniel McCallum [Thu, 19 Nov 2009 01:11:23 +0000 (20:11 -0500)]
USB: add hex/bcd detection to usb modalias generation

The current code to generate usb modaliases from usb_device_id assumes
that the device's bcdDevice descriptor will actually be in BCD format.
While this should be a sane assumption, some devices don't follow spec
and just use plain old hex.  This causes drivers for these devices to
generate invalid modalias lines which will never actually match for the
hardware.

The following patch adds hex support for bcdDevice in file2alias.c by
detecting when a driver uses a hex formatted bcdDevice_(lo|hi) and
adjusts the output to hex format accordingly.

Drivers for devices which have bcdDevice conforming to BCD will have no
change in modalias output.  Drivers for devices which don't conform
(i.e. ibmcam) should now generate valid modaliases.

EXAMPLE OUTPUT (ibmcam; space added to highlight change)
    Old: usb:v0545p800D d030[10-9] dc*dsc*dp*ic*isc*ip*
    New: usb:v0545p800D d030a      dc*dsc*dp*ic*isc*ip*

Signed-off-by: Nathaniel McCallum <nathaniel@natemccallum.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: Exposing second ACM channel as tty for Nokia S60 phones.
Adrian Taylor [Thu, 19 Nov 2009 10:35:33 +0000 (10:35 +0000)]
USB: Exposing second ACM channel as tty for Nokia S60 phones.

Nokia S60 phones expose two ACM channels. The first is a modem and is picked
up by the standard AT-command interface information in the CDC-ACM driver. The
second is marked as having a vendor-specific protocol. Normally, we don't
expose those as ttys. (On some other devices, they may be claimed by the
rndis_host driver and used as a network interface).

But on S60 this second ACM channel is the way that third-party S60 application
developers are expected to communicate over USB. It acts as a serial device
at the S60 end, and so it should on Linux too.

The list of devices is largely derived from:
http://wiki.forum.nokia.com/index.php/S60_Platform_and_device_identification_codes
http://wiki.forum.nokia.com/index.php/Nokia_USB_Product_IDs
and includes only the S60 3rd Edition+ devices documented there.

There are many devices for which the USB device ID is not documented,
including:
    Nokia 6290
    Nokia E63
    Nokia 5630 XpressMusic
    Nokia 5730 XpressMusic
    Nokia 6710 Navigator
    Nokia 6720 classic
    Nokia 6730 Classic
    Nokia 6760 slide
    Nokia 6790 slide
    Nokia 6790 Surge
    Nokia E52
    Nokia E55
    Nokia E71x (AT&T)
    Nokia E72
    Nokia E75
    Nokia E75 US+LTA variant
    Nokia N79
    Nokia N86 8MP
    Nokia 5230 (RM-588)
    Nokia 5230 (RM-594)
    Nokia 5530 XpressMusic
    Nokia 5530 XpressMusic (china)
    Nokia 5800 XM
    Nokia N97 (RM-506)
    Nokia N97 mini
    Nokia X6
It would be good to add those subsequently.

Signed-off-by: Adrian Taylor <aat@realvnc.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: Check results of dma_map_single
Larry Finger [Thu, 5 Nov 2009 16:37:03 +0000 (10:37 -0600)]
USB: Check results of dma_map_single

In map_urb_for_dma(), the DMA address returned by dma_map_single()
is not checked to determine if it is legal. This lack of checking
contributed to a problem with the libertas wireless driver
(http://marc.info/?l=linux-wireless&m=125695331205062&w=2). The
difficulty was not detected until the buffer was unmapped. By this time
memory corruption had occurred.

The situation is fixed by testing the returned DMA address, and
returning -EAGAIN if the address is invalid.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: ehci: Allow EHCI to be built on OMAP3
Anand Gadiyar [Fri, 6 Nov 2009 19:46:32 +0000 (01:16 +0530)]
USB: ehci: Allow EHCI to be built on OMAP3

usb: ehci: Allow EHCI to be built on OMAP3

OMAP3 chips have a built-in EHCI controller.
The recently introduced omap ehci-hcd driver missed
out on selecting USB_ARCH_HAS_EHCI in Kconfig.

Without this, the driver cannot be built.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: add scatter-gather support to usbmon
Alan Stern [Fri, 6 Nov 2009 17:32:23 +0000 (12:32 -0500)]
USB: add scatter-gather support to usbmon

This patch (as1301) adds support to usbmon for scatter-gather URBs.
The text interface looks at only the first scatterlist element, since
it never copies more than 32 bytes of data anyway.  The binary
interface copies as much data as possible up to the first
non-addressable buffer.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: EHCI: add native scatter-gather support
Alan Stern [Fri, 6 Nov 2009 17:29:40 +0000 (12:29 -0500)]
USB: EHCI: add native scatter-gather support

This patch (as1300) adds native scatter-gather support to ehci-hcd.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: serial: sierra driver memory reduction
Elina Pasheva [Wed, 4 Nov 2009 18:25:48 +0000 (10:25 -0800)]
USB: serial: sierra driver memory reduction

This patch deals with reducing the memory footprint for sierra driver.
This optimization is aimed for embedded software customers.

Some sierra modems can expose upwards of 7 USB interfaces, each possibly
offering different services. In general, interfaces used for the
exchange of wireless data require much higher throughput, hence require
more memory (i.e. more URBs) than lower performance interfaces. URBs
used for the IN direction are pre-allocated by the driver and this patch
introduces a way to configure the number of IN URBs allocated on a
per-interface basis. Interfaces with lower throughput requirements
receive fewer URBs, thereby reducing the RAM memory consumed by the
driver.

NOTE1: This driver has always pre-allocated URBs for the IN direction.

NOTE2: The number of URBs pre-allocated for the low-performance
interfaces has already been extensively tested in previous versions of
this driver.

We also added the capability to log function calls by adding DEBUG flag.
Please note that  this flag is commented out because this is the default
state
for it.

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: Interface Association Descriptors added to CDC & RNDIS
Michal Nazarewicz [Wed, 28 Oct 2009 15:57:30 +0000 (16:57 +0100)]
USB: Interface Association Descriptors added to CDC & RNDIS

Without Interface Association Descriptor, the CDC serial and
RNDIS functions did not work correctly when added to a
composite gadget with other functions.  This is because, it
defined two interfaces and some hosts tried to treat each
interface separatelly.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: fsg_common_init() created
Michal Nazarewicz [Wed, 28 Oct 2009 15:57:22 +0000 (16:57 +0100)]
USB: g_mass_storage: fsg_common_init() created

Moved code initialising fsg_common structure to fsg_common_init()
function which is called from fsg_bind().  Moreover, changed
reference counting mechanism: fsg_common has a reference counter
which counts how many fsg_dev structures uses it.  When this
reaches zero fsg_common_release() is run which unregisters
LUN devices and frees memory.

fsg_common_init() takes pointer to fsg_common structure as an
argument.  If it is NULL function allocates storage otherwise
uses pointed to memory (handy if fsg_common is a field of another
structure or a static variable).

fsg_common_release() will free storage only if
free_storage_on_release is set -- it is initialised by
fsg_common_init(): set if allocation was done, unset
otherwise (one may overwrite it of course).

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: constant length buffers used
Michal Nazarewicz [Wed, 28 Oct 2009 15:57:21 +0000 (16:57 +0100)]
USB: g_mass_storage: constant length buffers used

Using version of fsg_buffhd structure with buf field being an
array of characters with predefined size.  Since mass storage
function does not define changing buffer size on run-time it is
not required for the field to be a pointer to void and allocating
space dynamically.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: parts of fsg_dev moved to fsg_common structure
Michal Nazarewicz [Wed, 28 Oct 2009 15:57:20 +0000 (16:57 +0100)]
USB: g_mass_storage: parts of fsg_dev moved to fsg_common structure

In the final version, many fsg_dev structures will (be able to)
refer to a single fsg_common structure and so it is required
to move common data to another object which can be shared.

Situation where many fsg_dev structures refer single fsg_common
structure is when a single instance of MSF is used in several
USB configurations.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: testing code from f_mass_storage.c removed
Michal Nazarewicz [Wed, 28 Oct 2009 15:57:19 +0000 (16:57 +0100)]
USB: g_mass_storage: testing code from f_mass_storage.c removed

Removed code that was included when CONFIG_USB_FILE_STORAGE_TEST
was defined.  If this functionality is required one may still use
the original File-backed Storage Gadget.  It has been agreed that
testing functionality is not required in the composite function.

Also removed fsg_suspend() and fsg_resume() which were no
operations.

Moreover, storage_common.c has been modified in such a way that
defining certain macros skips parts of the file.  Those macros
are:
* FSG_NO_INTR_EP -- skips interrupt endpoint descriptors
* FSG_NO_DEVICE_STRINGS -- skips certain strings
* FSG_NO_OTG -- skips OTG descriptor

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_mass_storage: template f_mass_storage.c file created
Michal Nazarewicz [Wed, 28 Oct 2009 15:57:18 +0000 (16:57 +0100)]
USB: g_mass_storage: template f_mass_storage.c file created

Copied file_storage.c to f_mass_storage.c which will be used as
template for the Mass Storage composite Function.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_file_storage: more code from file_storage.c moved to storage_common.c
Michal Nazarewicz [Wed, 28 Oct 2009 15:57:17 +0000 (16:57 +0100)]
USB: g_file_storage: more code from file_storage.c moved to storage_common.c

Since storage_common.c no longer references mod_data object
it is now possible to include it before mod_data object is
defined.  This makes it possible to move some defines that
are used as default values of mod_data fields to be defined
in storage_common.c file (where they should be set from
the beginning).

Also, show_ro(), show_file(), store_ro() and store_file()
have been moved to storage_common.c with LUN's device's
drvdata changed from pointing to fsg_dev to pointing to
rw_semaphore (&fsg->filesem).

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_file_storage: per-LUN ro, removable and cdrom flags handling changed
Michal Nazarewicz [Wed, 28 Oct 2009 15:57:16 +0000 (16:57 +0100)]
USB: g_file_storage: per-LUN ro, removable and cdrom flags handling changed

removable and cdrom flag has been added to the fsg_lun structure
removing any references to mod_data object from storage_common.c.

As of read-only flag, previously it was set if a read-only
backing file was specified (which is good) and remained set
even after the file has been closed (which may be considered an
issue).  Currently, the initial read-only flag is preserved so
if it was unset each time file is opened code will try to open
it read-write even if previous file was opened read-only.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_file_storage: "fsg_" prefix added to some identifiers
Michal Nazarewicz [Wed, 28 Oct 2009 15:57:15 +0000 (16:57 +0100)]
USB: g_file_storage: "fsg_" prefix added to some identifiers

Prefixed some identifiers that were defined in storage_common.c file
with "fsg_".  Not all identifiers were prefixed but the ones that are
most likely to produce conflicts when used with other USB functions.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: g_file_storage: parts of file_storage.c moved to separate file
Michal Nazarewicz [Wed, 28 Oct 2009 15:57:14 +0000 (16:57 +0100)]
USB: g_file_storage: parts of file_storage.c moved to separate file

Moved parts of the file_storage.c file which do not reference fsg_dev
structure to newly created storage_common.c file. dump_msg() and
dump_cdb() have been changed to macros to remove fsg_dev reference.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: Add EHCI support for MX27 and MX31 based boards
Daniel Mack [Wed, 28 Oct 2009 00:14:59 +0000 (01:14 +0100)]
USB: Add EHCI support for MX27 and MX31 based boards

The Freescale MX27 and MX31 SoCs have a EHCI controller onboard.
The controller is capable of USB on the go. This patch adds
a driver to support all three of them.

Users have to pass details about serial interface configuration in the
platform data.

The USB OTG core used here is the ARC core, so the driver should
be renamed and probably be merged with ehci-fsl.c eventually.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>