Dave Airlie [Tue, 15 May 2018 05:59:10 +0000 (15:59 +1000)]
Merge tag 'drm-amdkfd-next-2018-05-14' of git://people.freedesktop.org/~gabbayo/linux into drm-next
This is amdkfd pull for 4.18. The major new features are:
- Add support for GFXv9 dGPUs (VEGA)
- Add support for userptr memory mapping
In addition, there are a couple of small fixes and improvements, such as:
- Fix lock handling
- Fix rollback packet in kernel kfd_queue
- Optimize kfd signal handling
- Fix CP hang in APU
Dave Airlie [Tue, 15 May 2018 05:37:07 +0000 (15:37 +1000)]
Merge tag 'exynos-drm-next-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
- Add S5PV210 FIMD variant support.
- Add IPP v2 framework.
. it is a rewritten version of the Exynos mem-to-mem image processing
framework which supprts color space conversion, image up/down-scaling
and rotation. This new version replaces existing userspace API with
new easy-to-use and simple ones so we have already applied the use of
these API to real user, Tizen Platform[1], and also makes existing
Scaler, FIMC, GScaler and Rotator drivers to use IPP v2 core API.
And below are patch lists we have applied to a real user,
https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/log/?h=tizen&qt=grep&q=ipp
https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/commit/?h=tizen&id=b59be207365d10efd489e6f71c8a045b558c44fe
https://git.tizen.org/cgit/platform/kernel/linux-exynos/log/?h=tizen&qt=grep&q=ipp
TDM(Tizen Display Manager) is a Display HAL for Tizen platform.
Ps. Only real user using IPP API is Tizen.
[1] https://www.tizen.org/
- Two cleanups
. One is to just remove mode_set callback from MIPI-DSI driver
because drm_display_mode data is already available from crtc
atomic state.
. And other is to just use new return type, vm_fault_t
for page fault handler.
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
Reference id -> 1c8f422059ae ("mm: change return type to
vm_fault_t")
Eric Anholt [Wed, 9 May 2018 00:14:25 +0000 (17:14 -0700)]
drm: Fix render node numbering regression from control node removal.
drm_minor_alloc() does multiplication on this enum, so the removal
ended up moving render nodes down from 128 base to 64. This caused
Mesa's surfaceless backend to be unable to open the render nodes,
since it was still looking up at 128.
Andrzej Hajda [Mon, 7 May 2018 09:29:28 +0000 (11:29 +0200)]
drm/exynos/dsi: remove mode_set callback
The callback was used only to copy provided mode to context for later
usage. Since the mode is always available from crtc atomic state this code
can be removed.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Shashank Sharma [Tue, 8 May 2018 11:09:45 +0000 (16:39 +0530)]
drm: Add and handle new aspect ratios in DRM layer
HDMI 2.0/CEA-861-F introduces two new aspect ratios:
- 64:27
- 256:135
This patch:
- Adds new DRM flags for to represent these new aspect ratios.
- Adds new cases to handle these aspect ratios while converting
from user->kernel mode or vise versa.
This patch was once reviewed and merged, and later reverted due
to lack of DRM client protection, while adding aspect ratio bits
in user modes. This is a re-spin of the series, with DRM client
cap protection.
The previous series can be found here:
https://pw-emeril.freedesktop.org/series/10850/
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> (V2) Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> (V2) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
V3: rebase
V4: rebase
V5: corrected the macro name for an aspect ratio, in a switch case.
V6: rebase
V7: rebase
V8: rebase
V9: rebase
V10: rebase
V11: rebase
V12: rebase
V13: rebase
V14: rebase
Shashank Sharma [Tue, 8 May 2018 11:09:44 +0000 (16:39 +0530)]
drm: Add aspect ratio parsing in DRM layer
Current DRM layer functions don't parse aspect ratio information
while converting a user mode->kernel mode or vice versa. This
causes modeset to pick mode with wrong aspect ratio, eventually
causing failures in HDMI compliance test cases, due to wrong VIC.
This patch adds aspect ratio information in DRM's mode conversion
and mode comparision functions, to make sure kernel picks mode
with right aspect ratio (as per the VIC).
Background:
This patch was once reviewed and merged, and later reverted due to
lack of DRM cap protection. This is a re-spin of this patch, this
time with DRM cap protection, to avoid aspect ratio information, when
the client doesn't request for it.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Lin, Jia <lin.a.jia@intel.com> Signed-off-by: Akashdeep Sharma <akashdeep.sharma@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (V2) Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> (V4) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
V3: modified the aspect-ratio check in drm_mode_equal as per new flags
provided by Ville. https://patchwork.freedesktop.org/patch/188043/
V4: rebase
V5: rebase
V6: As recommended by Ville, avoided matching of aspect-ratio in
drm_fb_helper, while trying to find a common mode among connectors
for the target clone mode.
V7: rebase
V8: rebase
V9: rebase
V10: rebase
V11: rebase
V12: rebase
V13: rebase
V14: rebase
Ankit Nautiyal [Tue, 8 May 2018 11:09:43 +0000 (16:39 +0530)]
drm: Expose modes with aspect ratio, only if requested
We parse the EDID and add all the modes in the connector's modelist.
This adds CEA modes with aspect ratio information too, regardless of
whether user space requested this information or not.
This patch:
-prunes the modes with aspect-ratio information, from the
drm_mode_get_connector modelist supplied to the user, if the
user-space has not set the aspect ratio DRM client cap. However if
such a mode is unique in the list, it is kept in the list, with
aspect-ratio flags reset.
-prepares a list of exposed modes, which is used to find unique modes
if aspect-ratio is not allowed.
-adds a new list_head 'exposed_head' in drm_mode_display, to traverse
the list of exposed modes.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
V3: As suggested by Ville, modified the mechanism of pruning of modes
with aspect-ratio, if the aspect-ratio is not supported. Instead
of straight away pruning such a mode, the mode is retained with
aspect ratio bits set to zero, provided it is unique.
V4: rebase
V5: Addressed review comments from Ville:
-used a pointer to store last valid mode.
-avoided, modifying of picture_aspect_ratio in kernel mode,
instead only flags bits of user mode are reset (if aspect-ratio
is not supported).
V6: As suggested by Ville, corrected the mode pruning logic and
elaborated the mode pruning logic and the assumptions taken.
V7: rebase
V8: rebase
V9: rebase
V10: rebase
V11: Fixed the issue caused in kms_3d test, and enhanced the pruning
logic to correctly identify and prune modes with aspect-ratio,
if aspect-ratio cap is not set.
V12: As suggested by Ville, added another list_head in
drm_mode_display to traverse the list of exposed modes and
avoided duplication of modes.
V13: Minor modifications, as suggested by Ville.
v14: As suggested by Daniel Vetter and Ville Syrjala, corrected the
pruning logic to avoid any dependency in the order of mode with
aspect-ratio. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-9-git-send-email-ankit.k.nautiyal@intel.com
Ankit Nautiyal [Tue, 8 May 2018 11:09:42 +0000 (16:39 +0530)]
drm: Handle aspect ratio info in legacy modeset path
If the user-space does not support aspect-ratio, and requests for a
modeset with mode having aspect ratio bits set, then the given
user-mode must be rejected. Secondly, while preparing a user-mode from
kernel mode, the aspect-ratio info must not be given, if aspect-ratio
is not supported by the user.
This patch:
1. rejects the modes with aspect-ratio info, during modeset, if the
user does not support aspect ratio.
2. does not load the aspect-ratio info in user-mode structure, if
aspect ratio is not supported.
3. adds helper functions for determining if aspect-ratio is expected
in user-mode and for allowing/disallowing the aspect-ratio, if its
not expected.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
V3: Addressed review comments from Ville:
Do not corrupt the current crtc state by updating aspect-ratio on
the fly.
V4: rebase
V5: As suggested by Ville, rejected the modeset calls for modes with
aspect ratio, if the user does not set aspect-ratio cap.
V6: Used the helper functions for determining if aspect-ratio is
expected in the user-mode.
V7: rebase
V8: rebase
V9: rebase
V10: Modified the commit-message
V11: rebase
V12: Merged the patch for adding aspect-ratio helper functions
with this patch.
V13: Minor modifications as suggested by Ville.
V14: Removed helper functions, as they were used only once in legacy
modeset path, as suggested by Daniel Vetter.
Ankit Nautiyal [Tue, 8 May 2018 11:09:41 +0000 (16:39 +0530)]
drm: Add DRM client cap for aspect-ratio
To enable aspect-ratio support in DRM, blindly exposing the aspect
ratio information along with mode, can break things in existing
non-atomic user-spaces which have no intention or support to use this
aspect ratio information.
To avoid this, a new drm client cap is required to enable a non-atomic
user-space to advertise if it supports modes with aspect-ratio. Based
on this cap value, the kernel will take a call on exposing the aspect
ratio info in modes or not.
This patch adds the client cap for aspect-ratio.
Since no atomic-userspaces blow up on receiving aspect-ratio
information, the client cap for aspect-ratio is always enabled
for atomic clients.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
V3: rebase
V4: As suggested by Marteen Lankhorst modified the commit message
explaining the need to use the DRM cap for aspect-ratio. Also,
tweaked the comment lines in the code for better understanding and
clarity, as recommended by Shashank Sharma.
V5: rebase
V6: rebase
V7: rebase
V8: rebase
V9: rebase
V10: rebase
V11: rebase
V12: As suggested by Daniel Vetter and Ville Syrjala,
always enable aspect-ratio client cap for atomic userspaces,
if no atomic userspace breaks on aspect-ratio bits.
V13: rebase
V14: rebase
Ville Syrjälä [Tue, 8 May 2018 11:09:39 +0000 (16:39 +0530)]
drm/edid: Don't send bogus aspect ratios in AVI infoframes
If the user mode would specify an aspect ratio other than 4:3 or 16:9
we now silently ignore it. Maybe a better apporoach is to return an
error? Let's try that.
Also we must be careful that we don't try to send illegal picture
aspect in the infoframe as it's only capable of signalling none,
4:3, and 16:9. Currently we're sending these bogus infoframes
whenever the cea mode specifies some other aspect ratio.
Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-5-git-send-email-ankit.k.nautiyal@intel.com
Ville Syrjälä [Tue, 8 May 2018 11:09:38 +0000 (16:39 +0530)]
drm/edid: Fix cea mode aspect ratio handling
commit 6dffd431e229 ("drm: Add aspect ratio parsing in DRM layer")
cause us to not send out any VICs in the AVI infoframes. That commit
was since reverted, but if and when we add aspect ratio handing back
we need to be more careful.
Let's handle this by considering the aspect ratio as a requirement
for cea mode matching only if the passed in mode actually has a
non-zero aspect ratio field. This will keep userspace that doesn't
provide an aspect ratio working as before by matching it to the
first otherwise equal cea mode. And once userspace starts to
provide the aspect ratio it will be considerd a hard requirement
for the match.
Also change the hdmi mode matching to use drm_mode_match() for
consistency, but we don't match on aspect ratio there since the
spec doesn't list a specific aspect ratio for those modes.
Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: "Lin, Jia" <lin.a.jia@intel.com> Cc: Akashdeep Sharma <akashdeep.sharma@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-4-git-send-email-ankit.k.nautiyal@intel.com
Ville Syrjälä [Tue, 8 May 2018 11:09:37 +0000 (16:39 +0530)]
drm/edid: Use drm_mode_match_no_clocks_no_stereo() for consistentcy
Use drm_mode_equal_no_clocks_no_stereo() in
drm_match_hdmi_mode_clock_tolerance() for consistency as we
also use it in drm_match_hdmi_mode() and the cea mode matching
functions.
This doesn't actually change anything since the input mode
comes from detailed timings and we match it against
edid_4k_modes[] which. So none of those modes can have stereo
flags set.
Exynos Scaler is a hardware module, which processes graphic data fetched
from memory and transfers the resultant dato another memory buffer.
Graphics data can be up/down-scaled, rotated, flipped and converted color
space. Scaler hardware modules are a part of Exynos5420 and newer Exynos
SoCs.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/exynos: fimc: Convert driver to IPP v2 core API
This patch adapts Exynos DRM FIMC driver to new IPP v2 core API.
The side effect of this conversion is a switch to driver component API
to register properly in the Exynos DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Merge conflict so merged manually. Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/exynos: gsc: Convert driver to IPP v2 core API
This patch adapts Exynos DRM GScaler driver to new IPP v2 core API.
The side effect of this conversion is a switch to driver component API
to register properly in the Exynos DRM core. During the conversion
driver has been adapted to support more specific compatible strings
to distinguish between Exynos5250 and Exynos5420 (different hardware
limits). Support for Exynos5433 variant has been added too
(different limits table, removed dependency on ARCH_EXYNOS5).
drm/exynos: rotator: Convert driver to IPP v2 core API
This patch adapts Exynos DRM rotator driver to new IPP v2 core API.
The side effect of this conversion is a switch to driver component API
to register properly in the Exynos DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds Exynos IPP v2 subsystem and userspace API.
New userspace API is focused ONLY on memory-to-memory image processing.
The two remainging operation modes of obsolete IPP v1 API (framebuffer
writeback and local-path output with image processing) can be implemented
using standard DRM features: writeback connectors and additional DRM planes
with scaling features.
V2 IPP userspace API is based on stateless approach, which much better fits
to memory-to-memory image processing model. It also provides support for
all image formats, which are both already defined in DRM API and supported
by the existing IPP hardware modules.
The API consists of the following ioctls:
- DRM_IOCTL_EXYNOS_IPP_GET_RESOURCES: to enumerate all available image
processing modules,
- DRM_IOCTL_EXYNOS_IPP_GET_CAPS: to query capabilities and supported image
formats of given IPP module,
- DRM_IOCTL_EXYNOS_IPP_GET_LIMITS: to query hardware limitiations for
selected image format of given IPP module,
- DRM_IOCTL_EXYNOS_IPP_COMMIT: to perform operation described by the
provided structures (source and destination buffers, operation rectangle,
transformation, etc).
The proposed userspace API is extensible. In the future more advanced image
processing operations can be defined to support for example blending.
Userspace API is fully functional also on DRM render nodes, so it is not
limited to the root/privileged client.
Internal driver API also has been completely rewritten. New IPP core
performs all possible input validation, checks and object life-time
control. The drivers can focus only on writing configuration to hardware
registers. Stateless nature of DRM_IOCTL_EXYNOS_IPP_COMMIT ioctl simplifies
the driver API. Minimal driver needs to provide a single callback for
starting processing and an array with supported image formats.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Merge conflict so merged manually. Signed-off-by: Inki Dae <inki.dae@samsung.com>
David Lechner [Wed, 14 Mar 2018 22:58:45 +0000 (17:58 -0500)]
drm/tilcdc: Fix setting clock divider for omap-l138
This fixes setting the clock divider on the TI OMAP-L138 LCDK board.
The clock drivers for OMAP-L138 are being covernted to the common clock
framework. When this happens, clk_set_rate() will no longer return an
error. However, on this SoC, the clock rate cannot actually be changed
because the clock has to maintain a fixed ratio to the ARM clock. So
after attempting to set the clock rate, we need to check to see if the
new rate is actually close enough. If not, then follow the previous
error path to adjust the divider in LCDC IP block to compensate for not
being able to change the parent clock rate.
Tested working on a TI OMAP-L138 LCDK board.
Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
Inki Dae [Wed, 9 May 2018 00:27:08 +0000 (09:27 +0900)]
Merge tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next
Fixup pagefault issue of mixer driver
- it makes sure to check shadow register for interlace scan.
- it corrects chroma_addr[1], height and vertical position values.
And trivial cleanup
- it just removes duplicated drm_bridge_attach.
Matt Atwood [Fri, 4 May 2018 22:18:00 +0000 (15:18 -0700)]
drm/dp: Correctly mask DP_TRAINING_AUX_RD_INTERVAL values for DP 1.4
DP_TRAINING_AUX_RD_INTERVAL with DP 1.3 spec changed bit scheeme from 8
bits to 7 in DPCD 0x000e. The 8th bit is used to identify extended
receiver capabilities. For panels that use this new feature wait interval
would be increased by 512 ms, when spec is max 16 ms. This behavior is
described in table 2-158 of DP 1.4 spec address 0000eh.
With the introduction of DP 1.4 spec main link clock recovery was
standardized to 100 us regardless of TRAINING_AUX_RD_INTERVAL value.
To avoid breaking panels that are not spec compiant we now warn on
invalid values.
V2: commit title/message, masking all 7 bits, warn on out of spec values.
V3: commit message, make link train clock recovery follow DP 1.4 spec.
V4: style changes
V5: typo
V6: print statement revisions, DP_REV to DPCD_REV, comment correction
V7: typo
V8: Style
V9: Strip out DPCD_REV_XX into seperate patch
v10: DPCD_REV_XX to DP_DPCD_REV_XX
The xen_drm_front_shbuf_alloc() function was returning a mix of error
pointers and NULL and the the caller wasn't checking correctly. I've
changed it to always return error pointer consistently.
Fixes: c575b7eeb89f ("drm/xen-front: Add support for Xen PV display frontend") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180508092739.GB661@mwanda
Ezequiel Garcia [Fri, 4 May 2018 18:00:37 +0000 (15:00 -0300)]
dma-buf: Remove unneeded stubs around sync_debug interfaces
The sync_debug.h header is internal, and only used by
sw_sync.c. Therefore, SW_SYNC is always defined and there
is no need for the stubs. Remove them and make the code
simpler.
We have to check dma-buf reservation objects of our framebuffers before
we use them. Otherwise, another driver might be writing on the same
buffer which we are using. This would cause visible tearing effects
on display.
We can use existing atomic helper functions to solve this problem.
drm: rcar-du: Allow DU groups to work with hardware indexing
The group objects assume linear indexing, and more so always assume that
channel 0 of any active group is used.
Now that the CRTC objects support non-linear indexing, adapt the groups
to remove assumptions that channel 0 is utilised in each group by using
the channel mask provided in the device structures.
Finally ensure that the RGB routing is determined from the index of the
CRTC object (which represents the hardware DU channel index).
drm: rcar-du: Split CRTC handling to support hardware indexing
The DU CRTC driver does not support distinguishing between a hardware
index, and a software (CRTC) index in the event that a DU channel might
not be populated by the hardware.
Support this by adapting the rcar_du_device_info structure to store a
bitmask of available channels rather than a count of CRTCs. The count
can then be obtained by determining the hamming weight of the bitmask.
This allows the rcar_du_crtc_create() function to distinguish between
both index types, and non-populated DU channels will be skipped without
leaving a gap in the software CRTC indexes.
drm: rcar-du: Use the correct naming for ODPM fields in DEFR6
The naming of the fields for the ODPM signals in the DU extensional
function control register 6 (DEFR6) is incorrect against the data sheets
for both R-Car Gen2 and R-Car Gen3.
Replace the initialisation of the vsps table with a NULL specifier.
Fixes the following warning:
linux/drivers/gpu/drm/rcar-du/rcar_du_kms.c:483:40:
warning: Using plain integer as NULL pointer
CC drivers/gpu/drm/rcar-du/rcar_du_kms.o
Fixes: 3e81374e2014 ("drm: rcar-du: Support multiple sources from the same VSP") Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Vaishali Thakkar <vthakkar@vaishalithakkar.in> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
drm: rcar-du: of: Include header to define prototypes
The symbol 'rcar_du_of_init' is defined by the rcar_du_of module header,
but it is not included by the C implementation.
Include the header to correctly define the function prototypes.
Fixes the following warning:
linux/drivers/gpu/drm/rcar-du/rcar_du_of.c:319:13:
warning: symbol 'rcar_du_of_init' was not declared. Should it be static?
CC drivers/gpu/drm/rcar-du/rcar_du_of.o
drm/i915: Do not adjust scale when out of bounds, v2.
With the previous patch drm_atomic_helper_check_plane_state correctly
calculates clipping and the xf86-video-intel ddx is fixed to fall back
to GPU correctly when SetPlane fails, we can remove the hack where
we try to pan/zoom when out of min/max scaling range. This was already
poor behavior where the screen didn't show what was requested, and now
instead we reject it outright. This simplifies check_sprite_plane a lot.
Changes since v1:
- Set crtc_h to the height correctly.
- Reject < 3x3 rectangles instead of making them invisible for <gen9.
For gen9+ skl_update_scaler_plane will reject them.
drm/rect: Handle rounding errors in drm_rect_clip_scaled, v3.
Instead of relying on a scale which may increase rounding errors,
clip src by doing: src * (dst - clip) / dst and rounding the result
away from 1, so the new coordinates get closer to 1. We won't need
to fix up with a magic macro afterwards, because our scaling factor
will never go to the other side of 1.
Changes since v1:
- Adjust dst immediately, else drm_rect_width/height on dst gives bogus
results.
Change since v2:
- Get rid of macros and use 64-bits math.
When calculating limits we want to be as pessimistic as possible,
so we have to explicitly say whether we want to round up or down
to accurately calculate whether we are below min_scale or above
max_scale.
Jia-Ju Bai [Wed, 11 Apr 2018 08:33:42 +0000 (16:33 +0800)]
gpu: drm: bridge: adv7511: Replace mdelay with usleep_range in adv7511_probe
adv7511_probe() is never called in atomic context.
This function is only set as ".probe" in struct i2c_driver.
Despite never getting called from atomic context, adv7511_probe()
calls mdelay() to busily wait.
This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Andrzej Hajda [Fri, 2 Feb 2018 15:11:22 +0000 (16:11 +0100)]
drm/exynos/mixer: fix synchronization check in interlaced mode
In case of interlace mode video processor registers and mixer config
register must be check to ensure internal state is in sync with shadow
registers.
This patch fixes page-faults in interlaced mode.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Dave Airlie [Fri, 4 May 2018 00:31:10 +0000 (10:31 +1000)]
Merge tag 'drm-intel-next-2018-04-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
First drm/i915 feature batch heading for v4.18:
- drm-next backmerge to fix build (Rodrigo)
- GPU documentation improvements (Kevin)
- GuC and HuC refactoring, host/GuC communication, logging, fixes, and more
(mostly Michal and Michał, also Jackie, Michel and Piotr)
- PSR and PSR2 enabling and fixes (DK, José, Rodrigo and Chris)
- Selftest updates (Chris, Daniele)
- DPLL management refactoring (Lucas)
- DP MST fixes (Lyude and DK)
- Watermark refactoring and changes to support NV12 (Mahesh)
- NV12 prep work (Chandra)
- Icelake Combo PHY enablers (Manasi)
- Perf OA refactoring and ICL enabling (Lionel)
- ICL enabling (Oscar, Paulo, Nabendu, Mika, Kelvin, Michel)
- Workarounds refactoring (Oscar)
- HDCP fixes and improvements (Ramalingam, Radhakrishna)
- Power management fixes (Imre)
- Various display fixes (Maarten, Ville, Vidya, Jani, Gaurav)
- debugfs for FIFO underrun clearing (Maarten)
- Execlist improvements (Chris)
- Reset improvements (Chris)
- Plenty of things here and there I overlooked and/or didn't understand... (Everyone)
Dave Airlie [Fri, 4 May 2018 00:03:27 +0000 (10:03 +1000)]
Merge branch 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux into drm-fixes
Two fixes for now, one for a long standing problem uncovered by a commit
in the 4.17 merge window, one for a regression introduced by a previous
bugfix, Cc'd stable.
* 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Fix a buffer object leak
drm/vmwgfx: Clean up fbdev modeset locking
Eric Anholt [Mon, 30 Apr 2018 18:10:58 +0000 (11:10 -0700)]
drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+
This driver will be used to support Mesa on the Broadcom 7268 and 7278
platforms.
V3D 3.3 introduces an MMU, which means we no longer need CMA or vc4's
complicated CL/shader validation scheme. This massively changes the
GEM behavior, so I've forked off to a new driver.
v2: Mark SUBMIT_CL as needing DRM_AUTH. coccinelle fixes from kbuild
test robot. Drop personal git link from MAINTAINERS. Don't
double-map dma-buf imported BOs. Add kerneldoc about needing MMU
eviction. Drop prime vmap/unmap stubs. Delay mmap offset setup
to mmap time. Use drm_dev_init instead of _alloc. Use
ktime_get() for wait_bo timeouts. Drop drm_can_sleep() usage,
since we don't modeset. Switch page tables back to WC (debug
change to coherent had slipped in). Switch
drm_gem_object_unreference_unlocked() to
drm_gem_object_put_unlocked(). Simplify overflow mem handling by
not sharing overflow mem between jobs.
v3: no changes
v4: align submit_cl to 64 bits (review by airlied), check zero flags in
other ioctls.
Eric Anholt [Mon, 30 Apr 2018 23:59:27 +0000 (16:59 -0700)]
drm/vc4: Add a pad field to align drm_vc4_submit_cl to 64 bits.
I had originally asked Stefan Schake to drop the pad field from the
syncobj changes that just landed, because I couldn't come up with a
reason to align to 64 bits.
Talking with Dave Airlie about the new v3d driver's submit ioctl, we
came up with a reason: sizeof() on 64-bit platforms may align to 64
bits, in which case the userspace will be submitting the aligned size
and the final 32 bits won't be zero-padded by the kernel. If
userspace doesn't zero-fill, then a future ABI change adding a 32-bit
field at the end could potentially cause the kernel to read undefined
data from old userspace (our userspace happens to use structure
initialization that zero-fills, but as a general rule we try not to
rely on that in the kernel).
Linus Walleij [Thu, 3 May 2018 14:04:31 +0000 (16:04 +0200)]
drm/pl111: Fix module probe bug
Commit a30933c27602 ("drm/pl111: Support the Versatile Express")
Added a second module using the builtin_platform_driver() call,
which works fine as long as you do not try to build the PL111
driver as a module, because a module can only have one initcall
and cause the following build bug:
(...) multiple definition of `init_module' (...)
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Eric Anholt <eric@anholt.net> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: a30933c27602 ("drm/pl111: Support the Versatile Express") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180503140431.5798-1-linus.walleij@linaro.org
Daniel Vetter [Fri, 20 Apr 2018 06:51:59 +0000 (08:51 +0200)]
drm: remove all control node code
With the ioctl and driver prep done, we can remove everything else.
Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-4-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 3 May 2018 09:31:07 +0000 (11:31 +0200)]
drm/msm: Don't setup control node debugfs files
It's going away.
v2: Try harder to find them all.
Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Clark <robdclark@gmail.com> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Nicolas Dechesne <nicolas.dechesne@linaro.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180503093107.25955-1-daniel.vetter@ffwll.ch
drm/atomic: Handling the case when setting old crtc for plane
In the func drm_atomic_set_crtc_for_plane, with the current code,
if crtc of the plane_state and crtc passed as argument to the func
are same, entire func will executed in vein.
It will get state of crtc and clear and set the bits in plane_mask.
All these steps are not required for same old crtc.
Ideally, we should do nothing in this case, this patch handles the same,
and causes the program to return without doing anything in such scenario.
I shouldn't have pushed this, CI was right - I failed to remove the
BUG_ON(!ops->wait);
Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
dma-buf/fence: add fence_wait_any_timeout function v2
there was a restriction added that this only works if the dma-fence
uses the dma_fence_default_wait hook. Which works for amdgpu, which is
the only caller. Well, until you share some buffers with e.g. i915,
then you get an -EINVAL.
But there's really no reason for this, because all drivers must
support callbacks. The special ->wait hook is only as an optimization;
if the driver needs to create a worker thread for an active callback,
then it can avoid to do that if it knows that there's a process
context available already. So ->wait is just an optimization, just
using the logic in dma_fence_default_wait() should work for all
drivers.
Let's remove this restriction.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180427061724.28497-5-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 27 Apr 2018 06:17:10 +0000 (08:17 +0200)]
dma-fence: Make ->enable_signaling optional
Many drivers have a trivial implementation for ->enable_signaling.
Let's make it optional by assuming that signalling is already
available when the callback isn't present.
Daniel Vetter [Wed, 2 May 2018 08:23:59 +0000 (10:23 +0200)]
dma-fence: remove fill_driver_data callback
Noticed while I was typing docs. Entirely unused.
v2: Remove reference in @timeline_value_str too. While at it clarify
why timeline_value_str has a fence parameter - we don't have an
explicit timeline structure unfortunately.
drm: Add fake controlD* symlinks for backwards compat
Since then Keith has also added real control nodes with a
proper&useable uapi in the form of drm leases.
It's time to remove the control node leftovers.
Cc: Keith Packard <keithp@keithp.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-1-daniel.vetter@ffwll.ch
Dave Airlie [Thu, 3 May 2018 01:58:39 +0000 (11:58 +1000)]
Merge tag 'drm-misc-fixes-2018-05-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
vc4: Fix bo refcounts during async commits (Boris)
vga-dac: Fix edid memory leak (Sean)
Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Sean Paul <seanpaul@chromium.org>
* tag 'drm-misc-fixes-2018-05-02' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge: vga-dac: Fix edid memory leak
drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced
Ville Syrjälä [Thu, 26 Apr 2018 14:16:31 +0000 (17:16 +0300)]
drm/rect: Fix drm_rect_rotation_inv() docs
An overeager sed has corrupted the drm_rect_rotation_inv()
documentation. Fix it up.
Looks like it wasn't entirely correct before the sed fail
either. We were missing _rect_ from the function names, which
also explains why the sed hit these by accident.
Linus Walleij [Wed, 2 May 2018 13:47:19 +0000 (15:47 +0200)]
drm/pl111: Enable device-specific assigned memory
The Versatile Express has 8 MB of dedicated video RAM (VRAM)
on the motherboard, which is what we should be using for the
PL111 if available. On this platform, the memory backplane
is constructed so that only this memory will work properly
with the CLCD on the motherboard, using any other memory
area just gives random snow on the display.
The CA9 Versatile Express also has a PL111 instance on its
core tile that can address all memory, and this does not
have the restriction.
The memory is assigned to the device using the memory-region
device tree property and a "shared-dma-pool" reserved
memory pool like this:
Linus Walleij [Wed, 2 May 2018 13:47:18 +0000 (15:47 +0200)]
drm/pl111: Support the Versatile Express
The Versatile Express uses a special configuration controller
deeply embedded in the system motherboard FPGA to multiplex the
two to three (!) display controller instances out to the single
SiI9022 bridge.
Set up an extra file with the logic to probe to the FPGA mux
register on the system controller bus, then parse the device
tree to see if there is a CLCD or HDLCD instance on the core
tile (also known as the daughterboard) by looking in the
root of the device tree for compatible nodes.
- If there is a HDLCD on the core tile, and there is a driver
for it, we exit probe and deactivate the motherboard CLCD.
We do not touch the DVI mux in this case, to make sure we
don't break HDLCD.
- If there is a CLCD on both the motherboard and the core tile
(only the CA9 has this) the core tile CLCD takes precedence
and get muxed to the DVI connector.
- Only if there is no working graphics on the core tile, the
motherboard CLCD is probed and muxed to the DVI connector.
Core tile graphics should always take precedence as it can
address all memory and is also faster, however the motherboard
CLCD is good to have around for diagnostics and testing.
It is possible to test the motherboard CLCD by setting the
status = "disabled" property on the core tile CLCD or
HDLCD.
Scale down the Versatile Express to 16BPP so we can support a
1024x768 display despite the bus bandwidth restrictions on this
platform. (The motherboard CLCD supports slightly lower
resolution.)
drm/mediatek: Using the function drm_display_mode_to_videomode
This patch uses existing method drm_display_mode_to_videomode for
calculating front/back porches, sync lengths for mediatek dsi/dpi
drivers; instead of manually calculating them
Signed-off-by: Satendra Singh Thakur <thakursatendra2003@yahoo.co.in> Signed-off-by: CK Hu <ck.hu@mediatek.com>
Blending win0 with the background color doesn't seem to work
correctly. We only get the background color, no matter the contents of
the win0 framebuffer. However, blending pre-multiplied color with the
default opaque black default background color is a no-op, so we can
just disable blending to get the correct result.
Boris Brezillon [Mon, 30 Apr 2018 13:32:32 +0000 (15:32 +0200)]
drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced
Commit b9f19259b84d ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
introduced a mechanism to mark some BOs as purgeable to allow the driver
to drop them under memory pressure. In order to implement this feature
we had to add a mechanism to mark BOs as currently used by a piece of
hardware which materialized through the ->usecnt counter.
Plane code is supposed to increment usecnt when it attaches a BO to a
plane and decrement it when it's done with this BO, which was done in
the ->prepare_fb() and ->cleanup_fb() hooks. The problem is, async page
flip logic does not go through the regular atomic update path, and
->prepare_fb() and ->cleanup_fb() are not called in this case.
Fix that by manually calling vc4_bo_{inc,dec}_usecnt() in the
async-page-flip path.
Note that all this should go away as soon as we get generic async page
flip support in the core, in the meantime, this fix should do the
trick.
Sparse complains with following warning:
drivers/gpu/drm/vc4/vc4_v3d.c:222:1: warning: symbol
'vc4_allocate_bin_bo' was not declared. Should it be static?
Make vc4_allocate_bin static as it is not used outside of
vc4_v3d.c.
Tom Callaway [Mon, 23 Apr 2018 16:16:39 +0000 (12:16 -0400)]
drm/tinydrm/mi0283qt: Always set rotation value
The PiTFT (ili9340) has a hardware reset circuit that resets only
on power-on and not on each reboot through a gpio like the
rpi-display does. As a result, we need to always apply the
rotation value regardless of the display "on/off" state.
Moved the rotation setting code below out_enable:.
Dave Airlie [Sun, 29 Apr 2018 23:32:34 +0000 (09:32 +1000)]
Merge tag 'drm-misc-next-2018-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.18:
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
projects / mirror_ubuntu-disco-kernel.git / log