]>
git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/log
Arnd Bergmann [Fri, 28 Sep 2018 15:40:06 +0000 (17:40 +0200)]
Merge tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
arm64: tegra: Device tree changes for v4.20-rc1
This contains mostly device tree changes to support faster SDHCI modes
on Tegra210 and Tegra186.
* tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: I2C on Tegra194 is not compatible with Tegra114
arm64: dts: tegra186: Enable HS400
arm64: dts: tegra210: Enable HS400
arm64: dts: tegra186: Add SDMMC4 DQS trim value
arm64: dts: tegra210: Add SDMMC4 DQS trim value
arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
arm64: dts: tegra210: Assign clocks for sdmmc1 and sdmmc4
arm64: dts: tegra186: Add SDHCI tap and trim values
arm64: dts: tegra210: Add SDHCI tap and trim values
arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 15:32:55 +0000 (17:32 +0200)]
Merge tag 'tegra-for-4.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.20-rc1
This contains a massive amount of changes from Marcel Ziswiler for
various boards by Toradex.
* tag 'tegra-for-4.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (129 commits)
ARM: dts: paz00: fix wakeup gpio keycode
ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
ARM: tegra: colibri_t20: add eval board device tree
ARM: tegra: colibri_t20: rename ac97 label to tegra_ac97
ARM: tegra: colibri_t20: get rid of fake clocks simple bus
ARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic label
ARM: tegra: colibri_t20: iris: drop unused i2c_ddc label
ARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddc
ARM: tegra: colibri_t20: drop module level model and compatible
ARM: tegra: colibri_t20: iris: add colibri ssp support
ARM: tegra: colibri_t20: iris: simplify model and compatible properties
ARM: tegra: colibri_t20: simplify model and compatible properties
ARM: tegra: colibri_t20: add compatibility comment
ARM: tegra: colibri_t20: annotate/move sd card detect
ARM: tegra: colibri_t20: add gpio hogs for gmi_wr_n buffers
ARM: tegra: colibri_t20: add gpio hog to unreset usb ethernet chip
ARM: tegra: colibri_t20: add i2c-thermtrip
ARM: tegra: colibri_t20: annotate/rename lm95245 temperature sensor
ARM: tegra: colibri_t20: iris: add dr_mode property
ARM: tegra: colibri_t20: iris: add gpio wakeup key
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 15:31:14 +0000 (17:31 +0200)]
Merge tag 'tegra-for-4.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
dt-bindings: Changes for v4.20-rc1
This contains the PMC pad configuration bindings which are used to
control the voltage of various pads found on Tegra chips. Among other
things this is required to enable faster modes on SDHCI.
* tag 'tegra-for-4.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add Tegra PMC pad configuration bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 11:02:04 +0000 (13:02 +0200)]
Merge tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux into next/dt
This device-tree pxa update brings :
- a couple of changes for future pxa2xx platforms
- 2 fixes in RTC and I2C domain
* tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux:
ARM: dts: pxa: add pincontrol helpers
ARM: dts: pxa: fix power i2c base address
ARM: dts: pxa: fix the rtc controller
ARM: dts: pxa: change serial node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 10:48:09 +0000 (12:48 +0200)]
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic ARM64 DT updates for v4.20, round 2
- new SoC support: basic support for G12A family
- new board: Amlogic U200 board, using G12A SoC
- fix SPI bus warnings from new dtc updates
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support
dt-bindings: arm: amlogic: Add Meson G12A binding
arm64: dts: meson: Fix erroneous SPI bus warnings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 10:45:56 +0000 (12:45 +0200)]
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
ARM: dts: Amlogic updates for v4.20
- fix clock controller register sizes
- new board: Endless Mini (EC-100) by Endless Mobile
- add voltage regulators
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: odroidc1: add stdout-path property
ARM: dts: meson8b: odroidc1: enable the SAR ADC
ARM: dts: meson8b: odroidc1: add the fixed voltage regulators
ARM: dts: meson8b: odroidc1: add the CPU voltage regulator
ARM: dts: meson8b: Add support for the Endless Mini (EC-100)
ARM: dts: meson8b: add the RMII pins
ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins
dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100)
dt-bindings: add vendor prefix for "Endless Mobile, Inc."
ARM: dts: meson8b: fix the clock controller register size
ARM: dts: meson8: fix the clock controller register size
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 10:36:27 +0000 (12:36 +0200)]
Merge tag 'berlin64-dt-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into next/dt
Berlin64 DT changes for v4.20
* tag 'berlin64-dt-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
arm64: dts: synaptics: add dtsi file for Synaptics AS370 SoC
dt-bindings: arm: syna: add support for the AS370 SoC
dt-bindings: arm: move berlin binding documentation to syna.txt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 10:35:20 +0000 (12:35 +0200)]
Merge tag 'realview-dts-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
Realview DTS update for v4.20:
- One patch from Rob fixing SPI node names
* tag 'realview-dts-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: realview: Fix SPI controller node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Thu, 13 Sep 2018 18:12:33 +0000 (13:12 -0500)]
ARM: dts: lpc32xx: Fix SPI controller node names
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Thu, 13 Sep 2018 18:12:44 +0000 (13:12 -0500)]
arm64: dts: lg: Fix SPI controller node names
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Thu, 13 Sep 2018 18:12:40 +0000 (13:12 -0500)]
arm64: dts: amd: Fix SPI bus warnings
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@
e1030000 : node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@
e1030000 : node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@
e1030000 : node name for SPI buses should be 'spi'
Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Thu, 13 Sep 2018 18:12:26 +0000 (13:12 -0500)]
ARM: dts: realview: Fix SPI controller node names
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Jisheng Zhang [Fri, 13 Jul 2018 09:05:04 +0000 (17:05 +0800)]
arm64: dts: synaptics: add dtsi file for Synaptics AS370 SoC
Add initial dtsi file to support Synaptics AS370 SoC with quad
Cortex-A53 CPUs.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Jisheng Zhang [Fri, 13 Jul 2018 09:00:33 +0000 (17:00 +0800)]
dt-bindings: arm: syna: add support for the AS370 SoC
The AS370 SoC is a new derivative of the berlin family. However, the
SoC isn't named as berlin*.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Jisheng Zhang [Fri, 13 Jul 2018 08:52:16 +0000 (16:52 +0800)]
dt-bindings: arm: move berlin binding documentation to syna.txt
Move berlin binding documentation as part of transition from Marvell
berlin to Synaptics SoC.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Rob Herring <robh@kernel.org>
Marc Dietrich [Thu, 2 Aug 2018 08:45:40 +0000 (10:45 +0200)]
ARM: dts: paz00: fix wakeup gpio keycode
The power key is controlled solely by the EC, which only tiggeres this
gpio after wakeup.
Fixes immediately return to suspend after wake from LP1.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Arnd Bergmann [Wed, 26 Sep 2018 15:07:57 +0000 (17:07 +0200)]
Merge tag 'zynq-dt-for-v4.20' of https://github.com/Xilinx/linux-xlnx into next/dt
ARM: dts: zynq: DT changes for v4.20
- Fix DTS spi/i2c warnings for zc702/zc770 boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Thu, 30 Aug 2018 17:21:53 +0000 (19:21 +0200)]
ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
Fix indentation and alignment when spaces were used instead of tabs.
This fixes checkpatch errors like:
ERROR: code indent should use tabs where possible
#306: FILE: arch/arm/boot/dts/tegra20-paz00.dts:306:
+^I^I <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;$
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:06 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: add eval board device tree
Add an evaluation board device tree more in-line with all our other
device trees.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:05 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: rename ac97 label to tegra_ac97
Rename ac97 label to tegra_ac97 to be more in-line with the device tree
binding documentation.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:04 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: get rid of fake clocks simple bus
Get rid of the fake clocks simple bus and use node names as per the
actual schematics.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:03 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic label
Rename tps6586x@34 to pmic@34 and drop the unused pmic label.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:02 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: iris: drop unused i2c_ddc label
Drop unused i2c_ddc label.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:01 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddc
Rename i2c_ddc to hdmi_ddc to be more in-line with other device trees.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:00 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: drop module level model and compatible
Drop model and compatible nodes from the module level device tree as
they get overridden by the carrier board device tree anyway.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:59 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: add colibri ssp support
Add Colibri SSP aka SPI support using the SPI4 instance.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:58 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: simplify model and compatible properties
Simplify model and compatible by dropping the 256/512 MB from the model,
-512 from the compatible and rename that property from toradex,iris to
toradex,colibri_t20-iris to be more in-line with all our other device
trees.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:57 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: simplify model and compatible properties
Simplify model and compatible by dropping the 256/512 MB from the model
and -512 from the compatible properties to be more in-line with all our
other device trees.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:56 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add compatibility comment
Add compatibility comment.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:55 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: annotate/move sd card detect
Annotate the SD card, its detect pin and move the SD card detect GPIO
definition from the module to the carrier board more in-line with our
other device trees.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:54 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add gpio hogs for gmi_wr_n buffers
Add GPIO hogs for GMI_WR_N buffers:
- tri-stating GMI_WR_N on SODIMM pin 99 nPWE
- not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:53 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add gpio hog to unreset usb ethernet chip
Add GPIO hog to unreset ASIX AX88772B USB Ethernet chip.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:52 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add i2c-thermtrip
Add i2c-thermtrip which would set the SLEEP MODE bit in the SUPPLYENE
register of the TPS658643 PMIC.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:51 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: annotate/rename lm95245 temperature sensor
Rename and annotate LM95245 temperature sensor more in-line with our
other device trees.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:50 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: add dr_mode property
Add dr_mode property to the USB controller.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:49 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: add gpio wakeup key
Add SODIMM pin 45 as GPIO wakeup key.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:48 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: use high speed uart driver
Use high speed UART driver compatible nvidia,tegra20-hsuart.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:47 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: add uart-c
Add UART-C.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:46 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: annotate uarts
Annotate UART-A and UART-B.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:45 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: display controller rgb panel support
Add display controller parallel RGB panel support incl. backlight PWM.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:44 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add missing pinmux
Explicitly add pinmux' for all T20 SoC ball groups now:
- Colibri Address/Data Bus (GMI) further pins used as GPIOs
- Colibri BL_ON
- Colibri EXT_IO*
- Colibri L_BIAS, LCD_M1 is muxed with LCD_DE today's display need DE,
disable LCD_M1
- more Colibri LCD pins (L_* resp. LDD<*>)
- Colibri LCD (Optional 24 BPP Support)
- Colibri MMCCD
- uart_a_dsr and uart_a_dcd as GPIOs
- Colibri USB_CDET
- I2C3 (Optional)
- JTAG_RTCK
- LAN_RESET, LAN_EXT_WAKEUP and LAN_PME (All On-module)
- more NAND pins
- RESET_OUT
- THERMD_ALERT# (On-module), unlatched I2C address pin of LM95245
temperature sensor therefore requires disabling for now
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:43 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: pinmux clean-up
Just cosmetic pinmux clean-up.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:42 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: update sound nvidia,model
Update sound nvidia,model to be more in-line with our other device
trees.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:41 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: indentation/line-feed/white-space clean-up
Cleaning up indentation, line-feed and white-space.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:40 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: remove phy-reset-gpio from controller node
Remove the phy-reset-gpio from the USB controller node as it is already
specified in the PHY node.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:39 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: annotate usb ehci instances
Annotate USB EHCI instances.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:38 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add missing regulators
Add missing regulators:
- reg_lan_v_bus being USB Ethernet chip vbus supply
- carrier board reg_3v3 to be used as backlight and panel power supply
- carrier board HDMI supply being reg_5v0
- reg_usbc_vbus being the USB vbus supply of the EHCI instance 0
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:37 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: regulator clean-up
Just cosmetic regulator clean-up.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:36 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: use no-1-8-v
Use no-1-8-v property rather than vmmc/vqmmc supplies and drop now
obsolete and anyway non-existent vcc_sd.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:35 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: reorder host1x/hdmi properties
Reorder Host1x/HDMI properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:34 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add local-mac-address property
Add empty local-mac-address property to be filled in by boot loader
(e.g. U-Boot).
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:33 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: annotate i2c busses
Annotate I2C busses: GEN2_I2C and CAM_I2C (I2C3) being unused and
DDC_CLOCK/DATA on X3 pin 15/16 e.g. used for display EDID.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:32 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: add missing aliases
Add rtc0 being the ultra low-power I2C one as found on the carrier board
and the 3rd UART being NVIDIA's UARTB.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:31 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: integrate i2c real time clock support
Integrate support for GEN1_I2C aka I2C_SDA/SCL on SODIMM pin 194/196 and
the M41T0M6 real time clock on the carrier board.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:30 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: move aliases from module to carrier board
Move RTC aliases from module to carrier board to be more in-line with
all our other device trees.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:05:04 +0000 (15:05 +0200)]
ARM: tegra: apalis-tk1: drop unused hdmi_ddc label
Drop unused hdmi_ddc label.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:05:03 +0000 (15:05 +0200)]
ARM: tegra: apalis-tk1: shorten temperature-sensor node
Shorten temperature-sensor node to just temp-sensor as suggested
in the binding documentation.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:05:02 +0000 (15:05 +0200)]
ARM: tegra: apalis-tk1: get rid of fake clocks simple bus
Get rid of the fake clocks simple bus and use node names as per the
actual schematics.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:05:01 +0000 (15:05 +0200)]
ARM: tegra: apalis-tk1: replace underscores in node names with dashes
As underscores in node names are not recommended replace them all where
possible with dashes.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:05:00 +0000 (15:05 +0200)]
ARM: tegra: apalis-tk1: drop obsolete spidev nodes
Drop obsolete spidev device tree nodes as nowadays one should do this
by binding the spidev driver to specific instances/chip selects at
runtime.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:59 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: drop module level model and compatible
Drop model and compatible nodes from the module level device tree as
they get overridden by the carrier board device tree anyway.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:58 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: reorder SD card properties
Reorder SD card properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:57 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: reorder cpu dfll clock properties
Reorder CPU DFLL clock properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:56 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: add toradex, apalis-tk1-v1.2 compatible
Add toradex,apalis-tk1-v1.2 compatible.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:55 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: enable emmc ddr52 mode
Add mmc-ddr-1_8v property enabling eMMC DDR52 mode.
root@apalis-tk1-mainline:~# cat /sys/kernel/debug/mmc2/ios
clock:
52000000 Hz
actual clock:
52000000 Hz
vdd: 21 (3.3 ~ 3.4 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 3 (8 bits)
timing spec: 8 (mmc DDR52)
signal voltage: 1 (1.80 V)
driver type: 0 (driver type B)
root@apalis-tk1-mainline:~# hdparm -t /dev/mmcblk2
/dev/mmcblk2:
Timing buffered disk reads: 256 MB in 3.02 seconds = 84.83 MB/sec
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:54 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: add proper emmc vmmc and vqmmc supplies
Add proper eMMC vmmc and vqmmc supplies e.g. fixing signalling voltage.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:53 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: reorder backlight properties
Reorder backlight properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:52 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: white-space clean-up
White-space clean-up.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:51 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: drop unused pinmux label
Drop unused pinmux label.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:50 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: add missing regulators
Add missing regulators:
- reg_module_3v3_audio being VDDA supply of SGTL5000
- VDDD supply of SGTL5000 actually being reg_1v8_vio
- TMP451 temperature sensor vcc supply being reg_module_3v3
- usb3-0 vbus supply being reg_usbh_vbus
- usb3-1 vbus supply being reg_usbo1_vbus
- carrier board HDMI supply being reg_5v0
- carrier board sata target 5v supply being reg_5v0
- carrier board sata target 12v supply being reg_12v0
- carrier board reg_3v3 actually being backlight power supply
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:49 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: regulator clean-up
Just cosmetic regulator clean-up.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:48 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: reorder padctl properties
Reorder padctl properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:47 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: reorder host1x/hdmi properties
Reorder Host1x/HDMI properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:46 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: add local-mac-address property
Add empty local-mac-address property to be filled in by boot loader
(e.g. U-Boot).
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:48 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: annotate power I2C being on-module
The power I2C bus aka PWR_I2C which connects to the audio codec, PMIC,
temperature sensor and touch screen controller is really on-module only.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:47 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: annotate unused i2c busses
Both GEN2_I2C as well as CAM_I2C (I2C3) are unused in our design.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:46 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: add mcp2515 vdd and xceiver supplies
Add the MCP2515 SPI CAN controller's vdd-supply being the regular
carrier board's reg_3v3 and xceiver-supply being reg_5v0.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:45 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: remove unused mcp2515 can0 label
Get rid of the unused MCP2515 SPI CAN controller can0 label.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:44 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity
Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:43 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: rename tps65911@2d, stmpe811@41 and tps62362@60
Rename a few nodes using more common names:
- rename tps65911@2d to pmic@2d
- rename stmpe811@41 to touchscreen@41
- rename tps62362@60 to regulator@60
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:42 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: rename hdmiddc to hdmi_ddc
Rename hdmiddc to hdmi_ddc to be more in-line with other device trees.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:41 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: drop obsolete spidev node
Drop obsolete spidev device tree node as nowadays one should do this
by binding the spidev driver to specific instances/chip selects at
runtime.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:40 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: drop module level model and compatible
Drop model and compatible nodes from the module level device tree as
they get overridden by the carrier board device tree anyway.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:39 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: update compatibility comment
Update compatibility comment.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:38 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: annotate ehci instance 1
Annotate EHCI instance 1 (USB2_DP/N) connecting to ASIX AX88772B USB to
Ethernet chip being on-module.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:37 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: annotate sd card detect
Annotate SD card detect.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:36 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: enable hda over hdmi
Enable HDA over HDMI.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:35 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip
Add GPIO hog to unreset ASIX AX88772B USB Ethernet chip.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:34 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: remove unused nvidia, is-wired property
Remove unused nvidia,is-wired property.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:33 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: move input include to carrier board
Move input include to carrier board.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:32 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: line break long compatible property line
Line break long compatible property line.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:31 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: get rid of fake clocks simple bus
Get rid of the fake clocks simple bus and use node names as per the
actual schematics.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:30 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: enable emmc ddr52 mode
Add mmc-ddr-1_8v property enabling eMMC DDR52 mode.
root@colibri-t30:~# cat /sys/kernel/debug/mmc1/ios
clock:
52000000 Hz
actual clock:
52000000 Hz
vdd: 21 (3.3 ~ 3.4 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 3 (8 bits)
timing spec: 8 (mmc DDR52)
signal voltage: 1 (1.80 V)
driver type: 0 (driver type B)
root@colibri-t30:~# hdparm -t /dev/mmcblk1
/dev/mmcblk1:
Timing buffered disk reads: 222 MB in 3.00 seconds = 73.92 MB/sec
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:29 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: add proper emmc vmmc and vqmmc supplies
Add proper eMMC vmmc and vqmmc supplies e.g. fixing signalling voltage.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:28 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: add i2c-thermtrip
Add i2c-thermtrip which would set the DEV_OFF bit in the DCDC control
register of the TPS65911 PMIC.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:27 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: further lm95245 temperature sensor annotation
Further LM95245 temperature sensor annotation.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:26 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811
Use proper irq-gpio for stmpe811 touch controller.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:25 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: add missing pinmux
Explicitly mux all T30 SoC balls now:
- Colibri Address/Data Bus (GMI)
- Colibri DDC
- Colibri EXT_IO*
- Colibri GPIO
- Colibri HOTPLUG_DETECT (HDMI)
- Colibri I2C
- Colibri LCD (L_* resp. LDD<*>)
- Colibri MMC_CD
- Colibri nRESET_OUT
- Colibri Parallel Camera (Optional)
- Colibri PWM<B>, <C>, <D>
- Colibri VGA
- Colibri USBC_DET
- Colibri USBH_PEN
- Colibri USBH_OC
- on-module AX88772B LAN control signals
- Colibri nBATT_FAULT(SENSE) and nVDD_FAULT(SENSE
- not connected and therefore disabled signals
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:24 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: pinmux clean-up
Clean-up pinmuxing:
- white-space clean-up
- explicitly disable LCD_M1 in favour of LCD_DE on L_BIAS
- explicitly disable multiplexed SSPFRM and SSPTXD
- get rid of nvidia,lock property
- add missing eMMC sdmmc4_cmd_pt7 and explicitly enable input
- explicitly disable lcd_dc1_pd2 (e.g. LM95245 I2C address pin)
- annotate TOUCH_PEN_INT# being on-module
- As underscores in node names are not recommended replace them all
where possible with dashes.
- Replace underscores in UART annotations (e.g. UART_A) with dashes
(e.g. UART-A) to be more in-line with our Colibri standard.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:23 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: drop pwmleds
Drop pwmleds in favour of using regular PWMs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>