Jianhua Lu [Sat, 18 Mar 2023 14:14:39 +0000 (22:14 +0800)]
ASoC: cs35l41: Add 12288000 clk freq to cs35l41_fs_mon clk config
There are 8 cs35l41 speaker amplifier connected to TDM
in my Xiaomi Mi Pad 5 Pro tablet. In this case, it's necessary
to set 12288000 (48000 * 32 * 8) clk freq for it.
Mark Brown [Mon, 20 Mar 2023 18:30:01 +0000 (18:30 +0000)]
Enable I2S support for RK3588/RK3588S SoCs
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
There are five I2S/PCM/TDM controllers and two I2S/PCM controllers embedded
in the RK3588 and RK3588S SoCs. Furthermore, RK3588 provides four additional
I2S/PCM/TDM controllers.
This patch series adds the required device tree nodes to support all the above.
Additionally, it enables analog audio support for the Rock 5B SBC, which has
been used to test both audio playback and recording.
Mark Brown [Mon, 20 Mar 2023 18:29:55 +0000 (18:29 +0000)]
Fix sound on ASUS Transformers
Merge series from Svyatoslav Ryhel <clamor95@gmail.com>:
- add quirk for headset detection used by some T30 devices
(ASUS Transformers, LG Optimus 4X HD and Vu);
- add RT5631 and MAX9808x machine drivers
- update bindings
---
Changes from v1
- fm34 dropped for re-work
- quirk for headset detection and rt5631 bringup splitted
- minor adjustments in binding updates
- improvement of rt5631 rate asignment
---
David Heidelberg (1):
dt-bindings: sound: nvidia,tegra-audio: add RT5631 CODEC
Svyatoslav Ryhel (7):
dt-bindings: sound: nvidia,tegra-audio-common: add
coupled-mic-hp-detect property
ASoC: tegra: Support coupled mic-hp detection
ARM: tegra: transformers: update sound nodes
ASoC: tegra: Support RT5631 by machine driver
ARM: tegra: transformers: bind RT5631 sound nodes
dt-bindings: sound: nvidia,tegra-audio: add MAX9808x CODEC
ASoC: tegra: Support MAX9808x by machine driver
Alexander Stein [Thu, 16 Mar 2023 12:36:11 +0000 (13:36 +0100)]
ASoC: fsl: Specify driver name in ASoC card
Set the snd_soc_card driver name which fixes the warning:
fsl-asoc-card sound: ASoC: driver name too long 'imx-audio-tlv320aic32x4'
-> 'imx-audio-tlv32'
ASoC: dt-bindings: rockchip: Document audio graph port
The Rockchip I2S controller is currently used in conjunction with
audio-graph-card to provide an endpoint for binding with the other side
of the audio link.
This is achieved via the 'port' property, which is not allowed:
rk3399-rockpro64.dtb: i2s@ff890000: Unevaluated properties are not allowed ('port' was unexpected)
Fix the issue by documenting the missing property.
Add Realtek ALC5631/RT5631 codec support to the Tegra ASoC machine driver.
The RT5631 codec is found on devices like ASUS Transformer TF201, TF700T
and other Tegra-based Android tablets.
This quirk is used for cases when there is GPIO which detects
any type of 3.5 Jack insertion and actual type of jack is defined
by other GPIO. 3.5 Jack GPIO generates interrupt and MIC GPIO
indicates type of Jack only if 3.5 Jack GPIO is active.
Mark Brown [Fri, 17 Mar 2023 17:43:11 +0000 (17:43 +0000)]
ASoC: SOF: ipc4-topology: Add support for effect
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series will add support for IPC4 process modules as effect
widgets. We can cover wide range of modules as a generic process or
effect module, the patches will lay down the fundation and the generic
code to handle them.
At initialization time process modules can receive additional
information on top of the base_cfg, which is defined as base_cfg_ext, an
extension for the base configuration struct. Other parameters or blobs
for these modules are sent as a separate message via
LARGE_CONFIG message, which is handled by the existing bytes control support.
Mark Brown [Fri, 17 Mar 2023 16:39:12 +0000 (16:39 +0000)]
ASoC: SOF: ipc4: upport multiple configs for BE DAIs
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Backend DAIs may support multiple audio formats. Modify pipeline setup to select
a suitable configuration based on topology and frontend DAI runtime configuration.
The prime use case is BT offload support where we need the abality to select
different configuration on the BE side.
Peter Ujfalusi [Fri, 17 Mar 2023 06:35:24 +0000 (08:35 +0200)]
ASoC: SOF: ipc4-topology: Initialize in_format to NULL in sof_ipc4_get_audio_fmt
If the available_fmt->num_input_formats is 0 and there is a failure during
the output format parsing then a kfree() would be called on the
uninitialized in_format pointer.
By initializing the in_format to NULL, this error can be avoided.
Fixes: 7ab6b1e8302c ("ASoC: SOF: ipc4-topology: Modify the type of available input/output formats") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20230317063524.8280-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Chao Song [Thu, 16 Mar 2023 15:11:36 +0000 (17:11 +0200)]
ASoC: SOF: ipc4-topology: set copier output format for process module
The copier output pin 0 format is set with module instance
initialization, format for additional copier output pin
should be set before the pin is used.
If a process module is connected to additional copier output
pin, the copier output pin format should be set according to
the corresponding input pin format of the process module.
Signed-off-by: Chao Song <chao.song@linux.intel.com> Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230316151137.7598-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: ipc4-topology: Add support for base config extension
Some processing modules need the audio formats for all their input and
output pins appended to the base config during module init. So add support
for building the base config extension using the available pin formats
from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230316151137.7598-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Chao Song [Thu, 16 Mar 2023 15:11:34 +0000 (17:11 +0200)]
ASoC: SOF: ipc4-topology: add base module config extension structure
The modules currently supported by the SOF firmware use the base module
config containing the audio format for the input/output pin 0 for
initialization. But some processing modules with multiple input/output
pins require the audio formats to be sent with the init instance IPC
payload. Modules that require the base config extension will need to
indicate this in the module information in the firmware manifest.
Introduce a new struct sof_ipc4_base_module_cfg_ext which contains the
pin formats for the input and output pins. This will be appended to the
init instance IPC payload for modules that require it.
Signed-off-by: Chao Song <chao.song@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230316151137.7598-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Kai Vehmanen [Thu, 16 Mar 2023 14:14:57 +0000 (16:14 +0200)]
ASoC: SOF: ipc4-pcm: support multiple configs for BE DAIs
Backend DAIs may support multiple audio formats. Modify pipeline
setup to select a suitable configuration based on topology and
frontend DAI runtime configuration.
For sampling rate, if one of the BE DAI configurations has
a sampling rate matching that of FE DAI, configure BE DAI to
this rate.
For sample format, the current code hardcodes DAI copier sample format
to 32bit for both playback and capture pipelines. This is not always
desired, so lift the limitation and set the sample format based on
topology definitions for the copiers. For capture pipelines, we want to
set the BE DAI pipeline format based on topology instead of using the FE
DAI format. This covers the common use-case where BE DAI outputs data at
a higher sample precision and sample width is reduced later in the
pipeline. Instead of hardcoding to 32bit, use the BE DAI copier output
format defined in topology.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230316141458.13940-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Vijaya Anand [Wed, 15 Mar 2023 23:10:55 +0000 (04:40 +0530)]
ASoC: dt-bindings: adi,adau17x1: Convert to DT schema
Convert the binding document for adi,adau17x1 from txt to yaml
so one could validate dt-entries correctly and any future additions
can go into yaml format. Add address and size cells to example to
prevent errors regarding reg format.
Signed-off-by: Vijaya Anand <sunrockers8@gmail.com> Cc: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230315231055.3067-1-sunrockers8@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Miscellaneous updates to make the example match reality:
- Correct SSI resource region size,
- Complete half-conversion to new-style CPG/MSSR bindings,
- Add missing power-domains, resets, and reset-names properties,
- Use interrupt binding definitions instead of hardcoded numbers,
- Correct interrupt flags,
- Drop double blank line.
substream->runtime will be attached when substream was opened
at snd_pcm_attach_substream(). When it uses DPCM,
FE substream->runtime is attached, but BE substream->runtime is not.
Thus, we are copying FE substream->runtime to BE.
But, we are copyig FE substream->runtime to FE dpcm->runtime first (A),
and copy it to BE dpcm->runtime (B), and copy it to
BE substream->runtime (C).
ASoC: soc-dai.c: add missing flag check at snd_soc_pcm_dai_probe()
dai->probed is used at snd_soc_pcm_dai_probe/remove(),
and used to call real remove() function only when it was probed.
int snd_soc_pcm_dai_probe(...)
{
...
for_each_rtd_dais(rtd, i, dai) {
...
if (dai->driver->probe) {
(A) int ret = dai->driver->probe(dai);
if (ret < 0)
return soc_dai_ret(dai, ret);
}
=> dai->probed = 1;
}
...
}
int snd_soc_pcm_dai_remove(...)
{
...
for_each_rtd_dais(rtd, i, dai) {
...
=> if (dai->probed &&
...) {
...
}
=> dai->probed = 0;
}
...
}
But on probe() case, we need to check dai->probed before calling
real probe() function at (A), otherwise real probe() might be called
multi times (but real remove() will be called only once).
This patch checks it at probe().
Mark Brown [Tue, 14 Mar 2023 13:58:48 +0000 (13:58 +0000)]
ASoC: SOF: ipc4: Add support for formats per pins
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The modules in IPC4 can have multiple 'pins' on their input and output
and these pins can receive or output audio in different formats.
Currently we assume that all pins are using the same format which is a
limitation that needs to be lifted in order to support more complex
components.
This series will extend and rework the format handling to allow
different formats on pins.
Mark Brown [Tue, 14 Mar 2023 13:58:42 +0000 (13:58 +0000)]
ASoC: SOF: ipc4: Add support for bytes control
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series will add support for bytes control and topology types.
With IPC4 only the binary payload is sent to the firmware via LARGE_CONFIG
message (which does similar multi-part message handling as the IPC3 control
message did).
The bytes payload itself is not checked by the kernel but user space expected to
wrap it in sof_abi_hdr struct in order to get the target information of the
binary data.
The SOF firmware and sof-ctl have been updated to support blobs used in IPC4
setups.
There are many log messages throughout the mt8192 sound drivers that
print to the info level and are triggered very frequently. Move these
messages to the debug level to avoid spamming the console.
There are some log messages in the mt8192 sound code that print the
function name, presumably to aid in tracing. However this can also be
achieved by ftrace and without spamming the console, so remove these
messages.
Chao Song [Mon, 13 Mar 2023 10:13:02 +0000 (12:13 +0200)]
ASoC: SOF: sof-audio: add support for setting up loopback routes
During route setup, playback stream routes are setup by going through
sink path, capture stream routes are set up by going through source path.
This is not sufficient to handle loopback cases between pipelines
configured with different directions, e.g. a sidetone or an amplifier
feedback connected to a speaker protection module. So, add the logic to
handle such routes between widgets that aren't in the list of DAPM widgets
associated with the same PCM.
Link: https://github.com/thesofproject/linux/issues/4042 Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Chao Song <chao.song@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313101302.20950-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Trevor Wu [Tue, 7 Mar 2023 04:09:38 +0000 (12:09 +0800)]
ASoC: mediatek: mt6359: fix UNINIT problem
Coverity shows decaring variable reg without initializer. When
regmap_read returns an error, reg keeps the value left from earlier
computation. To prevent from the unexpected result in the case, assign
0 to reg.
Trevor Wu [Tue, 7 Mar 2023 04:09:37 +0000 (12:09 +0800)]
ASoC: mediatek: mt6358: fix UNINIT problem
Coverity shows decaring variable reg without initializer. When
regmap_read returns an error, reg keeps the value left from earlier
computation. To prevent from the unexpected result in the case, assign
0 to reg.
Trevor Wu [Tue, 7 Mar 2023 04:09:36 +0000 (12:09 +0800)]
ASoC: mediatek: mt9195-mt6359: fix UNINIT problem
Coverity shows using uninitialized value monitor. When regmap_read
returns an error, monitor keeps the value left from earlier
computation. To prevent from the unexpected result in the case, assign
0 to monitor.
Trevor Wu [Tue, 7 Mar 2023 04:09:35 +0000 (12:09 +0800)]
ASoC: mediatek: mt8195: add dai id check before accessing array
Coverity shows "afe_priv->dai_priv[dai_id] evaluates to an address that
could be at negative offset of an array.". Add dai id check before
accessing the array element. This ensures that the offset of an array must
be a valid index.
ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count
In preparation for handling processing modules with different
input/output pin counts, introduce two new tokens for input/output
audio format counts. Use these token values to parse all the available
audio formats from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313124856.8140-11-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: ipc4-topology: Remove the ref_audio_fmt field
Remove the field in struct sof_ipc4_available_audio_format and pass the
format list to be searched as an argument to sof_ipc4_init_audio_fmt()
directly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313124856.8140-10-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: ipc4-topology: Modify the signature of sof_ipc4_init_audio_fmt()
Only the copier needs to set the output format in its IPC payload. So
move the code to set the output format inside
sof_ipc4_prepare_copier_module() and modify the signature of
sof_ipc4_init_audio_fmt() to remove the out_format argument.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313124856.8140-9-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: ipc4-topology: Modify the type of available input/output formats
Introduce a new struct sof_ipc4_pin_format which contains the pin index
and the buffer size. Replace the type of available input/output audio
formats in struct sof_ipc4_available_audio_format with this new struct
type and rename them to input_pin_fmts and output_pin_fmts.
Also, add a new token, SOF_TKN_CAVS_AUDIO_FORMAT_PIN_INDEX that will be
used to parse the pin index for the audio format from topology.
Currently we only set the audio format for Pin 0 in topology, so the
default value will be 0 for all audio formats.
Finally, parse the pin_index and the input/output buffer sizes
along with audio formats into the pin_format arrays in struct
sof_ipc4_available_audio_format. This makes the base_config array in struct
sof_ipc4_available_audio_format redundant. So remove it. This change
will allow the addition of audio formats for the non-zero pins in
topology transparent to the topology parser in the kernel.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313124856.8140-8-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: ipc4-topology: Always parse the output formats in topology
Parse the output formats available in topology always. Whether the
output format is sent in the init instance payload or not is decided
when sof_ipc4_init_audio_fmt() is invoked.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313124856.8140-7-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: ipc4-topology: Parse the SOF_COMP_TOKENS only once
There is no need to parse the cpc and is_pages values multiple times.
It is enough to parse the 2 tokens directly into the base_config field
in each module's init_instance IPC payload.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313124856.8140-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: ipc4-topology: Do not parse the DMA_BUFFER_SIZE token
Do not parse the SOF_TKN_CAVS_AUDIO_FORMAT_DMA_BUFFER_SIZE token as the
dma_buffer_size can be derived from the input/output buffer size and the
type of widget during copier prepare. For the deep buffer case,
introduce a new token that will be used to get the deep buffer DMA size
for the host copier from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313124856.8140-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: ipc4-topology: Add a new field in struct sof_ipc4_available_audio_format
Add a new field, input_audio_fmts, in struct
sof_ipc4_available_audio_format and parse all the available input audio
formats into this new field and not into the base_config field. This is
preparation to remove the base_config array from the struct
sof_ipc4_available_audio_format.
This simplifies the sof_ipc4_init_audio_fmt()
function as the reference audio format for matching with input params
has the same size.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313124856.8140-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we use input/output and sink/source pins interchangeably.
Remove the references to sink/source pins and replace with input/output
pins everywhere for consistency and clarity.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313124856.8140-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Rename SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID and
SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID as
SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID_BIT_DEPTH and
SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID_BIT_DEPTH respectively.
These are currently not used.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313124856.8140-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Mon, 13 Mar 2023 11:03:44 +0000 (13:03 +0200)]
ASoC: SOF: ipc4-control: Add support for bytes control get and put
Add support for bytes control by implementing bytes_get/put and
bytes_ext_get/put and blobs with either module init instance or
large config type.
For module init instance type the put will only update the stored
configuration blob and it is going to be taken into use next time the
module is (re-)initialized.
Large config type of blobs are sent to the firmware whenever the DSP is
powered up.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230313110344.16644-8-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Libin Yang [Mon, 13 Mar 2023 11:03:42 +0000 (13:03 +0200)]
ASoC: SOF: ipc4-control: set_volume_data only applies to VOLSW family
Make sure sof_ipc4_set_volume_data() is only called for the
SND_SOC_TPLG_CTL_VOLSW, SND_SOC_TPLG_CTL_VOLSW_SX and
SND_SOC_TPLG_CTL_VOLSW_XR_SX info_type.
Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230313110344.16644-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Mon, 13 Mar 2023 11:03:41 +0000 (13:03 +0200)]
ASoC: SOF: uapi: header: Update sof_abi_hdr doc for IPC4 use
With IPC4 the sof_abit_hdr is only used between user space
(and in topology) and kernel.
The same abi header is used with small differencies like different
magic number and the type field have slightly different name, but
similar function in IPC4 (param_id).
Update the kernel documentation to highlight the differences.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20230313110344.16644-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Mon, 13 Mar 2023 11:03:39 +0000 (13:03 +0200)]
ASoC: SOF: ipc3-control: Merge functions to handle bytes_ext get variants
The code for bytes_ext_get and bytes_ext_volatile_get is identical with
the only difference is that in case of volatile_get we refresh the data
from the DSP before returning it to user space.
Convert the callbacks to a simple wrapper for the same function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20230313110344.16644-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Linus Torvalds [Sun, 12 Mar 2023 23:15:36 +0000 (16:15 -0700)]
Merge tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by: Bell <1138267643@qq.com> Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Morten Linderud [Wed, 15 Feb 2023 09:25:52 +0000 (10:25 +0100)]
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
Linus Torvalds [Sun, 12 Mar 2023 16:47:08 +0000 (09:47 -0700)]
Merge tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
- Fix an off by one error when discarding folios after writeback
failure.
* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix off-by-one-block in xfs_discard_folio()
xfs: quotacheck failure can race with background inode inactivation
Linus Torvalds [Sun, 12 Mar 2023 16:17:30 +0000 (09:17 -0700)]
Merge tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
Linus Torvalds [Sun, 12 Mar 2023 16:12:03 +0000 (09:12 -0700)]
Merge tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:
- Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
impact to anything as those machines will fallback to XSAVEC which
is equivalent there"
* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
Linus Torvalds [Sun, 12 Mar 2023 16:04:28 +0000 (09:04 -0700)]
Merge tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
Linus Torvalds [Sun, 12 Mar 2023 16:00:54 +0000 (09:00 -0700)]
Merge tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs fixes from Christian Brauner:
- When allocating pages for a watch queue failed, we didn't return an
error causing userspace to proceed even though all subsequent
notifcations would be lost. Make sure to return an error.
- Fix a misformed tree entry for the idmapping maintainers entry.
- When setting file leases from an idmapped mount via
generic_setlease() we need to take the idmapping into account
otherwise taking a lease would fail from an idmapped mount.
- Remove two redundant assignments, one in splice code and the other in
locks code, that static checkers complained about.
* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
filelocks: use mount idmapping for setlease permission check
fs/locks: Remove redundant assignment to cmd
splice: Remove redundant assignment to ret
MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
Linus Torvalds [Sun, 12 Mar 2023 15:55:55 +0000 (08:55 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
Linus Torvalds [Sun, 12 Mar 2023 15:52:03 +0000 (08:52 -0700)]
cpumask: relax sanity checking constraints
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Linus Torvalds [Sat, 11 Mar 2023 17:24:05 +0000 (09:24 -0800)]
Merge tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
Rob Herring [Fri, 10 Mar 2023 14:47:32 +0000 (08:47 -0600)]
ASoC: Use of_property_read_bool() for boolean properties
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Rob Herring [Fri, 10 Mar 2023 14:47:31 +0000 (08:47 -0600)]
ASoC: Use of_property_present() for testing DT property presence
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Zhihao Cheng [Wed, 8 Mar 2023 03:26:43 +0000 (11:26 +0800)]
ext4: zero i_disksize when initializing the bootloader inode
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
Ye Bin [Tue, 7 Mar 2023 06:17:03 +0000 (14:17 +0800)]
ext4: make sure fs error flag setted before clear journal error
Now, jounral error number maybe cleared even though ext4_commit_super()
failed. This may lead to error flag miss, then fsck will miss to check
file system deeply.
Ye Bin [Tue, 7 Mar 2023 06:17:02 +0000 (14:17 +0800)]
ext4: commit super block if fs record error when journal record without error
Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.
Theodore Ts'o [Wed, 8 Mar 2023 04:15:49 +0000 (23:15 -0500)]
ext4, jbd2: add an optimized bmap for the journal inode
The generic bmap() function exported by the VFS takes locks and does
checks that are not necessary for the journal inode. So allow the
file system to set a journal-optimized bmap function in
journal->j_bmap.
Above issue happens as follows:
ext4_iget
ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
__ext4_mark_inode_dirty
ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
ext4_xattr_shift_entries
->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
ext4_update_inline_dir
get_max_inline_xattr_value_size
if (EXT4_I(inode)->i_inline_off)
entry = (struct ext4_xattr_entry *)((void *)raw_inode +
EXT4_I(inode)->i_inline_off);
free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
->As entry is incorrect, then 'free' may be negative
ext4_update_inline_data
value = kzalloc(len, GFP_NOFS);
-> len is unsigned int, maybe very large, then trigger warning when
'kzalloc()'
To resolve the above issue we need to update 'i_inline_off' after
'ext4_xattr_shift_entries()'. We do not need to set
EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty()
already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA
when it is needed may trigger a BUG_ON in ext4_writepages().
Reported-by: syzbot+d30838395804afc2fa6f@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230307015253.2232062-3-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ye Bin [Tue, 7 Mar 2023 01:52:52 +0000 (09:52 +0800)]
ext4: move where set the MAY_INLINE_DATA flag is set
The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().
Linus Torvalds [Sat, 11 Mar 2023 04:45:53 +0000 (20:45 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twenty fixes all in drivers except the one zone storage revalidation
fix to sd.
The megaraid_sas fixes are more on the level of a driver update
(enabling crash dump and increasing lun number) but I thought you
could let this slide on -rc1 and the next most extensive update is a
load of fixes to mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix wrong zone_write_granularity value during revalidate
scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
scsi: megaraid_sas: Update max supported LD IDs to 240
scsi: mpi3mr: Bad drive in topology results kernel crash
scsi: mpi3mr: NVMe command size greater than 8K fails
scsi: mpi3mr: Return proper values for failures in firmware init path
scsi: mpi3mr: Wait for diagnostic save during controller init
scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled
scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt
scsi: lpfc: Avoid usage of list iterator variable after loop
scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()
scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()
scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR
scsi: ufs: ufs-qcom: Remove impossible check
scsi: ufs: core: Add soft dependency on governor_simpleondemand
scsi: hisi_sas: Check devm_add_action() return value
scsi: qla2xxx: Add option to disable FC2 Target support
scsi: target: iscsi: Fix an error message in iscsi_check_key()
Linus Torvalds [Sat, 11 Mar 2023 04:06:49 +0000 (20:06 -0800)]
Merge tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix a regression in exclusive mode handling of the partition code,
introduced in this merge windoe (Yu)
- Fix for a use-after-free in BFQ (Yu)
- Add sysfs documentation for the 'hidden' attribute (Sagi)
* tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux:
block, bfq: fix uaf for 'stable_merge_bfqq'
docs: sysfs-block: document hidden sysfs entry
block: fix wrong mode for blkdev_put() from disk_scan_partitions()
projects / mirror_ubuntu-kernels.git / log