staging: comedi: das16: fix DMA init during board attach
DMA support is optional in this driver. To enable it, the user
passes the desired DMA channel during the board attach. A timer
is then used by the driver to periodically get the analog input
data from the DMA.
Since the DMA support is optional, modify the init code so that
it only fails if the DMA channel is unavailable or the DMA buffers
can not be allocated. Don't fail just because the user passed an
invalid DMA channel (only DMA channels 1 and 3 are valid).
Remove the printk() noise about the DMA. Change the printk() when
the request_dma() fails into a dev_err().
Move the timer initialization so it's only setup if DMA is available.
It's not needed otherwise. Also, only hook up the subdevice command
support functions if DMA is available. This allows removing a couple
sanity checks in the command support.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As noted in the driver, a timer is always used by this driver to handle
the DMA because samples could be dropped while waiting for the DMA done
interrupt.
Remove the irq setup code as well as the interrupt handler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das16: "timer_mode" is always used for DMA
As noted in the driver, a timer is always used by this driver to handle the
DMA due to buggy DMA controllers and the lack of a hardware fifo in some of
the supported boards.
Remove all the non-timer mode specific code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: olpc_dcon: provide detailed FB_OLPC_DCON help section
The FB_OLPC_DCON help section is to short according to checkpatch.pl.
We want more information about the controller type, its task, its video
pipeline position and so on.
There are no style issues, remove checkpatch.pl TODO entry.
Aaro Koskinen [Mon, 29 Jul 2013 17:07:56 +0000 (20:07 +0300)]
staging: octeon-usb: cvmx-usb: delete duplicated documentation from .h file
Delete duplicated function call documentation from the .h file. These
functions are just internal anyway, and the .h file will be completely
removed in the future when the driver will be made a single self-contained
.c file.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix most of the whitespace issues reported by checkpatch:
- use tabs for indentation
- brace placement vs. newlines
- (foo_t*) -> (foo_t *)
- i=0 -> i = 0
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Mon, 29 Jul 2013 17:07:47 +0000 (20:07 +0300)]
staging: octeon-usb: cvmx-usb: utilize Linux error codes
Use generic Linux error codes to replace cvmx_usb_status_t.
The conversion table:
Before After
cvmx_usb_status_t int
CVMX_USB_SUCCESS 0
CVMX_USB_INVALID_PARAM -EINVAL
CVMX_USB_NO_MEMORY -ENOMEM
CVMX_USB_BUSY -EBUSY
CVMX_USB_TIMEOUT -ETIMEDOUT
CVMX_USB_INCORRECT_MODE Deleted (was never used)
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Dietrich [Sat, 27 Jul 2013 16:20:58 +0000 (18:20 +0200)]
staging: nvec: re-enable the clock on resume
On resume the slave controller is reinitialized. The tegra i2c master
controller disables the clock at the end of the initialiation, propably
to save some power, and enables it again on each transfer. We don't
do this yet and also forgot to enable the clock on resume. Fix this
copy-paste error by not disabling the clock after initialization.
This didn't striked us yet because suspend/resume hasn't landed in mainline
yet, but will soon.
Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Won Kang [Sat, 27 Jul 2013 06:42:18 +0000 (15:42 +0900)]
staging: gdm724x: Modified function name conflict set_endian
Conflict resolution for function name set_endian when building for powerpc
The name changed to gdm_set_endian
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Won Kang <wonkang@gctsemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'pinctrl-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Driver fixes for AM33xx, SIRF and PFC pin controllers
- Fix a compile warning from the pinctrl single-register driver
- Fix a little nasty memory leak
* tag 'pinctrl-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: fix a memleak when freeing maps
pinctrl: pinctrl-single: fix compile warning when no CONFIG_PM
pinctrl: sh-pfc: fix SDHI0 VccQ regulator on sh73a0 with DT
arm/dts: sirf: fix the pingroup name mismatch between drivers and dts
pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without flowctrl
pinctrl: sirf: fix the pin number and mux bit for usp0
pinctrl: am33xx dt binding: correct include path
Merge tag 'trace-fixes-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Oleg is working on fixing a very tight race between opening a event
file and deleting that event at the same time (both must be done as
root).
I also found a bug while testing Oleg's patches which has to do with a
race with kprobes using the function tracer.
There's also a deadlock fix that was introduced with the previous
fixes"
* tag 'trace-fixes-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove locking trace_types_lock from tracing_reset_all_online_cpus()
ftrace: Add check for NULL regs if ops has SAVE_REGS set
tracing: Kill trace_cpu struct/members
tracing: Change tracing_fops/snapshot_fops to rely on tracing_get_cpu()
tracing: Change tracing_entries_fops to rely on tracing_get_cpu()
tracing: Change tracing_stats_fops to rely on tracing_get_cpu()
tracing: Change tracing_buffers_fops to rely on tracing_get_cpu()
tracing: Change tracing_pipe_fops() to rely on tracing_get_cpu()
tracing: Introduce trace_create_cpu_file() and tracing_get_cpu()
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is five bug fixes, two of which fix long standing problems
causing crashes (sd and mvsas). The remaining three are hung (isci
race) or lost (qla2xxx, isci) devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] isci: fix breakage caused by >16byte CDB patch
[SCSI] mvsas: Fix kernel panic on tile due to unaligned data access
[SCSI] sd: fix crash when UA received on DIF enabled device
[SCSI] qla2xxx: Properly set the tagging for commands.
[SCSI] isci: Fix a race condition in the SSP task management path
zram: prevent data loss in error cases of function zram_bvec_write()
In function zram_bvec_write(), previous data at the index is
already freed by function zram_free_page().
When failed to compress or zs_malloc, there is no way to restore old data.
Therefore, free previous data when it's about to update.
Also, no need to check whether table is not empty outside of
function zram_free_page(), because the function properly checks inside.
staging: comedi: usbdux: move and rename the bulk transfer commands
For aesthetic reasons, move the defines used for the bulk transfer
commands out of the middle of the code and rename them so they are
a bit more readable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbdux: 'dac_commands' does not need to be kzalloc()'d
The 'dac_commands' buffer is used to pass the ao channel list from
usbdux_ao_cmd() to the urb callback, usbduxsub_ao_isoc_irq(). This
buffer does not need to be allocated.
Change it into a simple array of the correct size. Rename the variable
to 'ao_chanlist' to clarify what it actually is.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbdux: remove unnecessary check in usbdux_ao_cmd()
This check is not necessary. The cmd->chanlist_len will always be
less than or equal to the subdevice len_chanlist that was setup
during the attach of the device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbdux: remove unnecessary check in usbdux_ai_cmd()
This check is not necessary. The cmd->chanlist_len will always be
less than or equal to the subdevice len_chanlist that was setup
during the attach of the device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbdux: simplify initializing the ao urb transfer_buffer
Remove the ugly casting of datap to the ao urb->transfer_buffer. The format
of the data in the buffer is simply.
[0] = # of channels to update (s->async->cmd.chanlist.len)
[1] = lsb of value for 1st channel to update
[2] = msb of value for 1st channel to update
[3] = 1st channel to update (depvriv->dac_commands[0])
If more than 1 channel is to be updated they are simply added to the buffer:
[4] = lsb of value for 2st channel to update
[5] = msb of value for 2st channel to update
[6] = 1st channel to update (depvriv->dac_commands[1])
etc.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbdux: cleanup the private data 'outBuffer'
This buffer is used to cache the values that are written to the
analog output channels. Currently it only caches the single writes
to the channels using the (*insn_write) callback. The async command
writes are not cached. The buffer is also being kzalloc'ed during
the attach of the driver to a size much larger that required.
Rename the CamelCase buffer and change it to an array in the private
data of the correct size to cache the analog output channel values.
Modify the analog output urb callback so it updates the cached values
with those used for the asynchronous command to allow readback after
the command completes.
The sanity check of the index to dac_commands[] (i.e. the 'chan' being
written) is not needed. The chanlist_len will always be less than the
number of channels.
Also, fix the dev_err() message so it uses the proper device pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbdux: rename private data variables
The usbdux and usbduxsigma drivers are _very_ similar. For aesthetic
reasons, rename the private data variables in this driver to match
the names in the usbduxsigma driver so we can start sharing the
common code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbdux: tidy up unlink and stop helpers
For aesthetic reasons, pass the comedi_device pointer to the unlink
helpers instead of the private data pointer.
All the unlink helpers simply call usb_kill_urb() to cancel any pending
transfer requests. The usb passed to usb_kill_urb() can be NULL so the
extra sanity check is not required.
The unlink helpers will always return success so just make them void
functions.
Since the stop helpers will also always return success, make them void
functions as well.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbdux: tidy up usbdux_pwm_stop()
For aesthetic reasons, pass the comedi_device pointer to this function
instead of the private data pointer. Rename the local variable used
for the private data pointer to the comedi "norm".
Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbdux: tidy up usbdux_ao_insn_write()
Rename the local variable used for the private data pointer to the
comedi "norm".
Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.
Tidy up the exit path using goto to ensure that the semaphore is
released.
Return -EBUSY instead of 0 if the (*insn_write) cannot be done because
a command is running.
Tidy up the for() loop that writes the data. The dux_commands[1] and [4]
can be set outside the loop since they are constant. Use a local pointer
for dux_commands[2] to load the value to write. Only the last value needs
to be cached in the private data for read back.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbduxsigma: set *_cmd_running flags before submitting urbs
As pointed out by Ian Abbott, the *_cmd_running flags should be set
before submitting the urbs. There is a possible race condition where
an urb could complete and the flag is checked in the completion
routine before it's set.
Reported-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 26 Jul 2013 11:03:20 +0000 (12:03 +0100)]
staging: comedi: Kconfig: COMEDI_NI_ATMIO doesn't need to depend on ISAPNP
The COMEDI_NI_ATMIO configuration option causes the "ni_atmio" module to
be built, which handles various National Instruments ISA-PNP data
acquisition cards. The configuration option currently depends on
ISAPNP.
The "ni_atmio" module is a "legacy" comedi driver with no
auto-configuration support and it doesn't register as a PNP card driver.
The only difference in initialization from the other comedi ISA card
drivers is that it will use the ISA-PNP functions to find, attach and
activate the card if no I/O base address has been specified by the user
in the COMEDI_DEVCONFIG ioctl.
The module compiles fine without the ISAPNP configuration option as the
<linux/isapnp.h> and <linux/pnp.h> headers provide dummy inline
functions if the ISAPNP and PNP options, respectively, are not enabled.
Remove the dependancy on the ISAPNP option since the module builds
without it and can be used without it.
(There is a very slim chance that comedi will support proper ISA PNP
drivers one day, in which case the ni_atmio driver could be converted to
use this support and not support manual configuration. However, not all
the PnP IDs of boards supported by this driver are currently known to
us.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 26 Jul 2013 11:03:19 +0000 (12:03 +0100)]
staging: comedi: Kconfig: COMEDI_NI_ATMIO16D should not depend on ISAPNP
The COMEDI_NI_ATMIO16D configuration option causes the "ni_atmio16d"
module to be built, which handles the National Instruments AT-MIO-16 and
AT-MIO-16D cards. The configuration option currently depends on ISAPNP,
but the module doesn't use any ISAPNP functions and the cards are legacy
ISA cards with base I/O port, IRQ and DMA channel configured by jumpers.
(The driver doesn't use DMA though.)
Remove the ISADNP dependancy from COMEDI_NI_ATMIO16D and fix up the help
text - the card names are missing a dash and they're not ISA-PNP.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is just a regular fixes pull apart from the qxl one, it has
radeon and intel bits in it,
The intel fixes are for a regression with the RC6 fix and a 3.10 hdmi
regression, whereas radeon is more DPM fixes, a few lockup fixes and
some rn50/r100 DAC fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/dpm: fix r600_enable_sclk_control()
drm/radeon/dpm: implement force performance levels for rv6xx
drm/radeon/dpm: fix displaygap programming on rv6xx
drm/radeon/dpm: fix a typo in the rv6xx mclk setup
drm/i915: initialize gt_lock early with other spin locks
drm/i915: fix hdmi portclock limits
drm/radeon: fix combios tables on older cards
drm/radeon: improve dac adjust heuristics for legacy pdac
drm/radeon: Another card with wrong primary dac adj
drm/radeon: fix endian issues with DP handling (v3)
drm/radeon/vm: only align the pt base to 32k
drm/radeon: wait for 3D idle before using CP DMA
Merge branch 'qxl-fixes' of git://people.freedesktop.org/~airlied/linux
Pull qxl drm fixes from Dave Airlie:
"Okay as I warned, the qxl driver was running a bit free and loose with
its ttm object reservations and the new lockdep enabled reservation
tracking shone a bright light into it, it also with the new
reservations mutexes hits a possible deadlock during boot.
The first patch is a real fix to render the console correctly as the
driver used to just drop irq renderering as too hard, this also fixes
a sleeping while atomic warning.
The other two patches are the big ugly ones that redo how the driver
allocates objects and reserves them and makes things all work
properly, I've tested this in a VM, and compared to the current code
which hits a lockdep warning and the sleep while atomic warning before
failing.
So sorry this is coming in late, I should have tested qxl before
merging the mutex code, but I'd rather just fix qxl with this than
revert the reservations code at this point"
* 'qxl-fixes' of git://people.freedesktop.org/~airlied/linux:
qxl: convert qxl driver to proper use for reservations
qxl: allow creation of pre-pinned objects and use for releases.
drm/qxl: add delayed fb operations
Merge tag 'pm+acpi-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These are just two fixes, a revert of the would-be backlight fix that
didn't work and an intel_pstate fix for two problems related to
maximum P-state selection.
Specifics:
- Revert of the ACPI video commit that I hoped would help fix
backlight problems related to Windows 8 compatibility on some
systems. Unfortunately, it turned out to cause problems to happen
too.
- Fix for two problems in intel_pstate, a possible failure to respond
to a load change on a quiet system and a possible failure to select
the highest available P-state on some systems. From Dirk
Brandewie"
* tag 'pm+acpi-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / video / i915: No ACPI backlight if firmware expects Windows 8"
cpufreq / intel_pstate: Change to scale off of max P-state
Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 fixes from Catalin Marinas:
- Stack size increased to 16K (similar to other 64-bit architectures)
- Additional cache flushing for secondary CPUs boot mode
* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: Change kernel stack size to 16K
arm64: Fix definition of arm_pm_restart to match the declaration
arm64: virt: ensure visibility of __boot_cpu_mode
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"This is a largeish batch of fixes, mostly because I missed -rc2 due to
travel/vacation. So in number these are a bit more than ideal unless
you amortize them over two -rcs.
Quick breakdown:
- Defconfig updates
- Making multi_v7_defconfig useful on more hardware to encourage
single-image usage
- Davinci and nomadik updates due to new code merged this merge
window
- Fixes for UART on Samsung platforms, both PM and clock-related
- A handful of warning fixes from defconfig builds, including for
max8925 backlight and pxamci (both with appropriate acks)
- Exynos5440 fixes for LPAE configuration, PM
- ...plus a bunch of other smaller changes all over the place
I expect to switch to regressions-or-severe-bugs-only fixes from here
on out"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
mfd: max8925: fix dt code for backlight
ARM: omap5: Only select errata 798181 if SMP
ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos
ARM: EXYNOS: Fix low level debug support
ARM: SAMSUNG: Save/restore only selected uart's registers
ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm
ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART
ARM: multi_v7_defconfig: Select USB chipidea driver
ARM: pxa: propagate errors from regulator_enable() to pxamci
ARM: zynq: fix compilation warning
ARM: keystone: fix compilation warning
ARM: highbank: Only touch common coherency control register fields
ARM: footbridge: fix overlapping PCI mappings
dmaengine: shdma: fix a build failure on platforms with no DMA support
ARM: STi: Set correct ARM ERRATAs.
ARM: dts: STi: Fix pinconf setup for STiH416 serial2
ARM: nomadik: configure for NO_HZ and HRTIMERS
ARM: nomadik: update defconfig base
ARM: nomadik: Update MMC defconfigs
ARM: davinci: defconfig: enable EDMA driver
...
Merge tag 'usb-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 3.11-rc3.
Lots of little things, nothing major. A number of new device ids,
build fixes for DMA, and a bunch of other minor things. All of these
have been in the linux-next tree"
* tag 'usb-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
usb: Clear both buffers when clearing a control transfer TT buffer.
usb/gadget: free opts struct on error recovery
USB: mos7840: fix memory leak in open
usb: serial: option.c: remove ONDA MT825UP product ID fromdriver
usb: serial: option: add Olivetti Olicard 200
usb: serial: option: blacklist ONDA MT689DC QMI interface
xhci: fix null pointer dereference on ring_doorbell_for_active_rings
usb: host: xhci: Enable XHCI_SPURIOUS_SUCCESS for all controllers with xhci 1.0
usb: fix build warning in pci-quirks.h when CONFIG_PCI is not enabled
usb: xhci: Mark two functions __maybe_unused
xhci: Avoid NULL pointer deref when host dies.
usb: serial: option: Add ONYX 3G device support
USB: ti_usb_3410_5052: fix dynamic-id matching
usb: option: add TP-LINK MA260
USB: option: add D-Link DWM-152/C1 and DWM-156/C1
USB: EHCI: Fix resume signalling on remote wakeup
USB: cp210x: add MMB and PI ZigBee USB Device Support
usb: cp210x support SEL C662 Vendor/Device
USB: option: append Petatel NP10T device to GSM modems list
USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvga
...
Merge tag 'tty-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 3 fixes for TTY and serial issues that have been reported.
Nothing huge, but nice to get fixed"
* tag 'tty-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: tegra: correct help message in Kconfig from 'ttyHS' to 'ttyTHS'
tty/8250_early: Don't truncate last character of options
TTY: snyclinkmp: calculating wrong addresses
Merge tag 'staging-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some tiny drivers/staging/ fixes for 3.11-rc3
A number of bugfixes, all pretty tiny, but resolve issues that have
been reported (the kstrtos32 change fixes a data corruption problem
that Dan found). And a MAINTAINERS file update for the comedi
drivers"
* tag 'staging-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
MAINTAINERS: Update the list of maintainers for staging/comedi driver.
staging: tidspbridge: replace strict_strtol() with kstrtos32()
staging: android: logger: Correct write offset reset on error
staging: zram: protect zram_reset_device() call
staging: gdm72xx: potential use after free in send_qos_list()
staging: drm/imx: drop "select OF_VIDEOMODE"
staging: frontier: use after free in disconnect()
staging: comedi: fix a race between do_cmd_ioctl() and read/write
staging: comedi: COMEDI_CANCEL ioctl should wake up read/write
Merge tag 'char-misc-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc patches from Greg KH:
"Here are some char/misc patches for 3.11-rc3. It's pretty much just:
- mei fixes
- hyperv fixes
- new ja_JP translation update
all tiny stuff, but fixes for issues people have reported."
* tag 'char-misc-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
HOWTO ja_JP sync
mei: me: fix waiting for hw ready
mei: don't have to clean the state on power up
mei: me: fix reset state machine
mei: hbm: fix typo in error message
Tools: hv: KVP: Fix a bug in IPV6 subnet enumeration
Drivers: hv: balloon: Do not post pressure status if interrupted
Drivers: hv: balloon: Fix a bug in the hot-add code
Drivers: hv: vmbus: incorrect device name is printed when child device is unregistered
Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a handful of regression and small fixes in ASoC, HD-audio and
USB-audio drivers.
- Sigmetal HD-audio codec regression fixes
- A copule of XRUN indication fixes for usb-audio devices
- ASoC: ep93xx build fix, sgtl5000 fix for probe order changes,
max98088 register access fix, etc"
* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hiface: return correct XRUN indication
ASoC: tegra: correct playback_dma_data setup
ASoC: core: double free in snd_soc_add_platform()
ALSA: usb-audio: 6fire: return correct XRUN indication
ASoC: ep93xx: fix build of ep93xx-ac97.c
ALSA: hda - Remove NO_PRESENCE bit override for Dell 1420n Laptop
ALSA: hda - Fix EAPD GPIO control for Sigmatel codecs
ASoC: atmel-ssc: remove clk_disable_unprepare call from critical section
ASoC: sgtl5000: defer the probe if clock is not found
ASoC: max98088 - fix element type of the register cache.
Merge tag 'for-linus-v3.11-rc3' of git://oss.sgi.com/xfs/xfs
Pull xfs fix from Ben Myers:
"Fix for regression in commit cca9f93a52d2 ("xfs: don't do IO when
creating an new inode"), recovery causing filesystem corruption after
a crash"
* tag 'for-linus-v3.11-rc3' of git://oss.sgi.com/xfs/xfs:
xfs: di_flushiter considered harmful
projects / mirror_ubuntu-bionic-kernel.git / log