Leon Romanovsky [Thu, 30 Jul 2020 08:27:19 +0000 (11:27 +0300)]
RDMA/core: Free DIM memory in error unwind
The memory allocated for the DIM wasn't freed in in error unwind path, fix
it by calling to rdma_dim_destroy().
Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs") Link: https://lore.kernel.org/r/20200730082719.1582397-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com <mailto:maxg@mellanox.com>> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky [Thu, 30 Jul 2020 08:27:18 +0000 (11:27 +0300)]
RDMA/core: Stop DIM before destroying CQ
HW destroy operation should be last operation after all possible CQ users
completed their work, so move DIM work cancellation before such destroy
call.
Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs") Link: https://lore.kernel.org/r/20200730082719.1582397-3-leon@kernel.org Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky [Thu, 30 Jul 2020 08:27:17 +0000 (11:27 +0300)]
RDMA/mlx5: Initialize QP mutex for the debug kernels
In DCT and RSS RAW QP creation flows, the QP mutex wasn't initialized and
the magic field inside lock was missing. This caused to the following
kernel warning for kernels build with CONFIG_DEBUG_MUTEXES.
Fixes: b4aaa1f0b415 ("IB/mlx5: Handle type IB_QPT_DRIVER when creating a QP") Link: https://lore.kernel.org/r/20200730082719.1582397-2-leon@kernel.org Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Mike Marciniszyn [Tue, 28 Jul 2020 18:38:48 +0000 (14:38 -0400)]
IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQE
The lookaside count is improperly initialized to the size of the
Receive Queue with the additional +1. In the traces below, the
RQ size is 384, so the count was set to 385.
The lookaside count is then rarely refreshed. Note the high and
incorrect count in the trace below:
Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1,
which is not valid because of the bogus high count.
Best case, the RWQE has never been posted and the rc logic sees an RWQE
that is too small (all zeros) and puts the QP into an error state.
In the worst case, a server slow at posting receive buffers might fool
rvt_get_rwqe() into fetching an old RWQE and corrupt memory.
Fix by deleting the faulty initialization code and creating an
inline to fetch the posted count and convert all callers to use
new inline.
Fixes: f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs") Link: https://lore.kernel.org/r/20200728183848.22226.29132.stgit@awfm-01.aw.intel.com Reported-by: Zhaojuan Guo <zguo@redhat.com> Cc: <stable@vger.kernel.org> # 5.4.x Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky [Tue, 28 Jul 2020 12:02:55 +0000 (15:02 +0300)]
RDMA/mlx5: Allow providing extra scatter CQE QP flag
Scatter CQE feature relies on two flags MLX5_QP_FLAG_SCATTER_CQE and
MLX5_QP_FLAG_ALLOW_SCATTER_CQE, both of them can be provided without
relation to device capability.
Relax global validity check to allow MLX5_QP_FLAG_ALLOW_SCATTER_CQE QP
flag.
Existing user applications are failing on this new validity check.
Fixes: 90ecb37a751b ("RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags") Fixes: 37518fa49f76 ("RDMA/mlx5: Process all vendor flags in one place") Link: https://lore.kernel.org/r/20200728120255.805733-1-leon@kernel.org Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Jason Gunthorpe [Mon, 27 Jul 2020 09:57:12 +0000 (12:57 +0300)]
RDMA/mlx5: Fix prefetch memory leak if get_prefetchable_mr fails
destroy_prefetch_work() must always be called if the work is not going
to be queued. The num_sge also should have been set to i, not i-1
which avoids the condition where it shouldn't have been called in the
first place.
Cc: stable@vger.kernel.org Fixes: fb985e278a30 ("RDMA/mlx5: Use SRCU properly in ODP prefetch") Link: https://lore.kernel.org/r/20200727095712.495652-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Jason Gunthorpe [Fri, 24 Jul 2020 13:19:29 +0000 (10:19 -0300)]
RDMA/cm: Add min length checks to user structure copies
These are missing throughout ucma, it harmlessly copies garbage from
userspace, but in this new code which uses min to compute the copy length
it can result in uninitialized stack memory. Check for minimum length at
the very start.
Merge tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild into master
Pull Kbuild fixes from Masahiro Yamada:
- do not use non-portable strsep() in a host program
- fix single target builds for external modules
- change Clang's --prefix option to make it work for the latest Clang
* tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
kbuild: fix single target builds for external modules
modpost: remove use of non-standard strsep() in HOSTCC code
Merge branch 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux into master
Pull parisc fixes from Helge Deller:
"Two fixes:
- Add the cmpxchg() function for pointers to u8 values. This fixes a
kernel linking error when building the tusb1210 driver (from Liam
Beguin).
- Add a define for atomic64_set_release() to fix CPU soft lockups
which happen because of missing unlocks while processing bit
operations (from John David Anglin)"
* 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Add atomic64_set_release() define to avoid CPU soft lockups
parisc: add support for cmpxchg on u8 pointers
Merge tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master
Pull char/misc driver fixes from Greg KH:
"Here are a few small driver fixes for 5.8-rc7
They include:
- habanalabs fixes
- tiny fpga driver fixes
- /dev/mem fixup from previous changes
- interconnect driver fixes
- binder fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
interconnect: msm8916: Fix buswidth of pcnoc_s nodes
interconnect: Do not skip aggregation for disabled paths
/dev/mem: Add missing memory barriers for devmem_inode
binder: Don't use mmput() from shrinker function.
habanalabs: prevent possible out-of-bounds array access
fpga: dfl: fix bug in port reset handshake
fpga: dfl: pci: reduce the scope of variable 'ret'
habanalabs: set 4s timeout for message to device CPU
habanalabs: set clock gating per engine
habanalabs: block WREG_BULK packet on PDMA
Merge tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into master
Pull driver core fix from Greg KH:
"A single driver core fix for 5.8-rc7. It resolves a problem found in
the previous fix for this code made in 5.8-rc6. Hopefully this is all
now cleared up, as this seems to be the last of the reported issues in
this area, and was tested on the problem hardware.
This patch has been in linux-next with no reported problems"
* tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Avoid NULL pointer dereference in device_get_next_child_node()
Merge tag 'tty-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into master
Pull tty/serial/fbcon fixes from Greg KH:
"Here are some small tty and serial and fbcon fixes for 5.8-rc7 to
resolve some reported issues.
The fbcon fix is in here as it was simpler to take it this way (and it
was acked by the maintainer) as it was related to the vt console fix
as well, both of which resolve syzbot-found issues in the console
handling code.
The other serial driver fixes are for small issues reported in the -rc
releases.
All of these have been in linux-next with no reported issues"
* tag 'tty-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X
fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins.
serial: 8250_mtk: Fix high-speed baud rates clamping
serial: 8250: fix null-ptr-deref in serial8250_start_tx()
serial: tegra: drop bogus NULL tty-port checks
serial: tegra: fix CREAD handling for PIO
tty: xilinx_uartps: Really fix id assignment
vt: Reject zero-sized screen buffer size.
Merge tag 'usb-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into master
Pull USB fixes from Greg KH:
"Three small USB XHCI driver fixes for 5.8-rc7.
They all resolve some minor issues that have been reported on some
different platforms.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: tegra: Fix allocation for the FPCI context
usb: xhci: Fix ASM2142/ASM3142 DMA addressing
usb: xhci-mtk: fix the failure of bandwidth allocation
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi into master
Pull SCSI fix from James Bottomley:
"Small core patch to fix a corner case bug: we forgot to run the queues
to handle starvation in the error exit from the scsi_queue_rq routine,
which can lead to hangs on error conditions"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Run queue in case of I/O resource contention failure
Merge tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master
Pull RISC-V fixes from Palmer Dabbelt:
"A few more fixes this week:
- A fix to avoid using SBI calls during kasan initialization, as the
SBI calls themselves have not been probed yet.
- Three fixes related to systems with multiple memory regions"
* tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Parse all memory blocks to remove unusable memory
RISC-V: Do not rely on initrd_start/end computed during early dt parsing
RISC-V: Set maximum number of mapped pages correctly
riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence
Merge tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix a section end page alignment assumption that was causing
crashes
- Fix ORC unwinding on freshly forked tasks which haven't executed
yet and which have empty user task stacks
- Fix the debug.exception-trace=1 sysctl dumping of user stacks,
which was broken by recent maccess changes"
* tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Dump user space code correctly again
x86/stacktrace: Fix reliable check for empty user task stacks
x86/unwind/orc: Fix ORC for newly forked tasks
x86, vmlinux.lds: Page-align end of ..page_aligned sections
Merge tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull uprobe fix from Ingo Molnar:
"Fix an interaction/regression between uprobes based shared library
tracing & GDB"
* tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
Merge tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull timer fix from Ingo Molnar:
"Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's"
* tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4
Merge tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull scheduler fixes from Ingo Molnar:
"Fix a race introduced by the recent loadavg race fix, plus add a debug
check for a hard to debug case of bogus wakeup function flags"
* tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Warn if garbage is passed to default_wake_function()
sched: Fix race against ptrace_freeze_trace()
Merge tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull EFI fixes from Ingo Molnar:
"Various EFI fixes:
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Clean up some x86 EFI stub details, some of which are borderline
bugs that copy around garbage into padding fields - let's fix these
out of caution.
- Fix build issues while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64"
* tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Revert "efi/x86: Fix build with gcc 4"
efi/efivars: Expose RT service availability via efivars abstraction
efi/libstub: Move the function prototypes to header file
efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds
efi/libstub/arm64: link stub lib.a conditionally
efi/x86: Only copy upto the end of setup_header
efi/x86: Remove unused variables
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net into master
Pull networking fixes from David Miller:
1) Fix RCU locaking in iwlwifi, from Johannes Berg.
2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.
3) Fix race in updating pause settings in bnxt_en, from Vasundhara
Volam.
4) Propagate error return properly during unbind failures in ax88172a,
from George Kennedy.
5) Fix memleak in adf7242_probe, from Liu Jian.
6) smc_drv_probe() can leak, from Wang Hai.
7) Don't muck with the carrier state if register_netdevice() fails in
the bonding driver, from Taehee Yoo.
8) Fix memleak in dpaa_eth_probe, from Liu Jian.
9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
Murali Karicheri.
10) Don't lose ionic RSS hash settings across FW update, from Shannon
Nelson.
11) Fix clobbered SKB control block in act_ct, from Wen Xu.
12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.
13) IS_UDPLITE cleanup a long time ago, incorrectly handled
transformations involving UDPLITE_RECV_CC. From Miaohe Lin.
14) Unbalanced locking in netdevsim, from Taehee Yoo.
15) Suppress false-positive error messages in qed driver, from Alexander
Lobakin.
16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.
17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.
18) Uninitialized value in geneve_changelink(), from Cong Wang.
19) Fix deadlock in xen-netfront, from Andera Righi.
19) flush_backlog() frees skbs with IRQs disabled, so should use
dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
drivers/net/wan: lapb: Corrected the usage of skb_cow
dev: Defer free of skbs in flush_backlog
qrtr: orphan socket in qrtr_release()
xen-netfront: fix potential deadlock in xennet_remove()
flow_offload: Move rhashtable inclusion to the source file
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
tcp: allow at most one TLP probe per flight
AX.25: Prevent integer overflows in connect and sendmsg
cxgb4: add missing release on skb in uld_send()
net: atlantic: fix PTP on AQC10X
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
sctp: shrink stream outq when fails to do addstream reconf
sctp: shrink stream outq only when new outcnt < old outcnt
AX.25: Fix out-of-bounds read in ax25_connect()
enetc: Remove the mdio bus on PF probe bailout
net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
net: ethernet: ave: Fix error returns in ave_init
drivers/net/wan/x25_asy: Fix to make it work
ipvs: fix the connection sync failed in some cases
...
riscv: Parse all memory blocks to remove unusable memory
Currently, maximum physical memory allowed is equal to -PAGE_OFFSET.
That's why we remove any memory blocks spanning beyond that size. However,
it is done only for memblock containing linux kernel which will not work
if there are multiple memblocks.
Process all memory blocks to figure out how much memory needs to be removed
and remove at the end instead of updating the memblock list in place.
RISC-V: Do not rely on initrd_start/end computed during early dt parsing
Currently, initrd_start/end are computed during early_init_dt_scan
but used during arch_setup. We will get the following panic if initrd is used
and CONFIG_DEBUG_VIRTUAL is turned on.
To avoid the error, initrd_start/end can be computed from phys_initrd_start/size
in setup itself. It also improves the initrd placement by aligning the start
and size with the page size.
Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code") Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Xie He [Fri, 24 Jul 2020 16:33:47 +0000 (09:33 -0700)]
drivers/net/wan: lapb: Corrected the usage of skb_cow
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers
"lapbether" and "hdlc_x25":
1) After skb_cow fails, kfree_skb should be called to drop a reference
to the skb. But in both drivers, kfree_skb is not called.
2) skb_cow should be called before skb_push so that is can ensure the
safety of skb_push. But in "lapbether", it is incorrectly called after
skb_push.
More details about these 2 issues:
1) The behavior of calling kfree_skb on failure is also the behavior of
netif_rx, which is called by this function with "return netif_rx(skb);".
So this function should follow this behavior, too.
2) In "lapbether", skb_cow is called after skb_push. This results in 2
logical issues:
a) skb_push is not protected by skb_cow;
b) An extra headroom of 1 byte is ensured after skb_push. This extra
headroom has no use in this function. It also has no use in the
upper-layer function that this function passes the skb to
(x25_lapb_receive_frame in net/x25/x25_dev.c).
So logically skb_cow should instead be called before skb_push.
Cc: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.
Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
RISC-V: Set maximum number of mapped pages correctly
Currently, maximum number of mapper pages are set to the pfn calculated
from the memblock size of the memblock containing kernel. This will work
until that memblock spans the entire memory. However, it will be set to
a wrong value if there are multiple memblocks defined in kernel
(e.g. with efi runtime services).
Set the the maximum value to the pfn calculated from dram size.
Merge tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into master
Pull PCI fixes from Bjorn Helgaas:
- Reject invalid IRQ 0 command line argument for virtio_mmio because
IRQ 0 now generates warnings (Bjorn Helgaas)
- Revert "PCI/PM: Assume ports without DLL Link Active train links in
100 ms", which broke nouveau (Bjorn Helgaas)
* tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"
virtio-mmio: Reject invalid IRQ 0 command line argument
Cong Wang [Fri, 24 Jul 2020 16:45:51 +0000 (09:45 -0700)]
qrtr: orphan socket in qrtr_release()
We have to detach sock from socket in qrtr_release(),
otherwise skb->sk may still reference to this socket
when the skb is released in tun->queue, particularly
sk->sk_wq still points to &sock->wq, which leads to
a UAF.
Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com Fixes: 28fb4e59a47d ("net: qrtr: Expose tunneling endpoint to user space") Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Righi [Fri, 24 Jul 2020 08:59:10 +0000 (10:59 +0200)]
xen-netfront: fix potential deadlock in xennet_remove()
There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:
1. state = read bus state
2. if state is not "Closed":
3. request to set state to "Closing"
4. wait for state to be set to "Closing"
5. request to set state to "Closed"
6. wait for state to be set to "Closed"
If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".
Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.
Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 24 Jul 2020 00:50:22 +0000 (10:50 +1000)]
flow_offload: Move rhashtable inclusion to the source file
I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to
be rebuilt. This dependency came through a bogus inclusion in the
file net/flow_offload.h. This patch moves it to the right place.
This patch also removes a lingering rhashtable inclusion in cls_api
created by the same commit.
Fixes: 4e481908c51b ("flow_offload: move tc indirect block to...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'akpm' into master (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Subsystems affected by this patch series: mm/pagemap, mm/shmem,
mm/hotfixes, mm/memcg, mm/hugetlb, mailmap, squashfs, scripts,
io-mapping, MAINTAINERS, and gdb"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
scripts/gdb: fix lx-symbols 'gdb.error' while loading modules
MAINTAINERS: add KCOV section
io-mapping: indicate mapping failure
scripts/decode_stacktrace: strip basepath from all paths
squashfs: fix length field overlap check in metadata reading
mailmap: add entry for Mike Rapoport
khugepaged: fix null-pointer dereference due to race
mm/hugetlb: avoid hardcoding while checking if cma is enabled
mm: memcg/slab: fix memory leak at non-root kmem_cache destroy
mm/memcg: fix refcount error while moving and swapping
mm/memcontrol: fix OOPS inside mem_cgroup_get_nr_swap_pages()
mm: initialize return of vm_insert_pages
vfs/xattr: mm/shmem: kernfs: release simple xattr entry in a right way
mm/mmap.c: close race between munmap() and expand_upwards()/downwards()
Merge tag 'for-5.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into master
Pull btrfs fixes from David Sterba:
"A few resouce leak fixes from recent patches, all are stable material.
The problems have been observed during testing or have a reproducer"
* tag 'for-5.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix mount failure caused by race with umount
btrfs: fix page leaks after failure to lock page for delalloc
btrfs: qgroup: fix data leak caused by race between writeback and truncate
btrfs: fix double free on ulist after backref resolution failure
Merge tag 'zonefs-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs into master
Pull zonefs fixes from Damien Le Moal:
"Two fixes, the first one to remove compilation warnings and the second
to avoid potentially inefficient allocation of BIOs for direct writes
into sequential zones"
* tag 'zonefs-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: count pages after truncating the iterator
zonefs: Fix compilation warning
Merge tag 'io_uring-5.8-2020-07-24' of git://git.kernel.dk/linux-block into master
Pull io_uring fixes from Jens Axboe:
- Fix discrepancy in how sqe->flags are treated for a few requests,
this makes it consistent (Daniele)
- Ensure that poll driven retry works with double waitqueue poll users
- Fix a missing io_req_init_async() (Pavel)
* tag 'io_uring-5.8-2020-07-24' of git://git.kernel.dk/linux-block:
io_uring: missed req_init_async() for IOSQE_ASYNC
io_uring: always allow drain/link/hardlink/async sqe flags
io_uring: ensure double poll additions work with both request types
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma into master
Pull rdma fixes from Jason Gunthorpe:
"One merge window regression, some corruption bugs in HNS and a few
more syzkaller fixes:
- Two long standing syzkaller races
- Fix incorrect HW configuration in HNS
- Restore accidentally dropped locking in IB CM
- Fix ODP prefetch bug added in the big rework several versions ago"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Prevent prefetch from racing with implicit destruction
RDMA/cm: Protect access to remote_sidr_table
RDMA/core: Fix race in rdma_alloc_commit_uobject()
RDMA/hns: Fix wrong PBL offset when VA is not aligned to PAGE_SIZE
RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC
RDMA/mlx5: Use xa_lock_irq when access to SRQ table
Merge tag 'for-5.8/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm into master
Pull device mapper fix from Mike Snitzer:
"A stable fix for DM integrity target's integrity recalculation that
gets skipped when resuming a device. This is a fix for a previous
stable@ fix"
* tag 'for-5.8/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix integrity recalculation that is improperly skipped
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into master
Pull i2c fixes from Wolfram Sang:
"Again some driver bugfixes and some documentation fixes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i2c-qcom-geni: Fix DMA transfer race
i2c: rcar: always clear ICSAR to avoid side effects
MAINTAINERS: i2c: at91: handover maintenance to Codrin Ciubotariu
i2c: drop duplicated word in the header file
i2c: cadence: Clear HOLD bit at correct time in Rx path
Revert "i2c: cadence: Fix the hold bit setting"
Merge tag 'drm-fixes-2020-07-24' of git://anongit.freedesktop.org/drm/drm into master
Pull drm fixes from Dave Airlie:
"Quiet fixes, I may have a single regression fix follow up to this for
nouveau, but it might be next week, Ben was testing it a bit more .
Otherwise two amdgpu fixes, one lima and one sun4i:
amdgpu:
- Fix crash when overclocking VegaM
- Fix possible crash when editing dpm levels
sun4i:
- Fix inverted HPD result; fixes an earlier fix
lima:
- fix timeout during reset"
* tag 'drm-fixes-2020-07-24' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Fix NULL dereference in dpm sysfs handlers
drm/amd/powerplay: fix a crash when overclocking Vega M
drm/lima: fix wait pp reset timeout
drm: sun4i: hdmi: Fix inverted HPD result
scripts/gdb: fix lx-symbols 'gdb.error' while loading modules
Commit ed66f991bb19 ("module: Refactor section attr into bin attribute")
removed the 'name' field from 'struct module_sect_attr' triggering the
following error when invoking lx-symbols:
(gdb) lx-symbols
loading vmlinux
scanning for modules in linux/build
loading @0xffffffffc014f000: linux/build/drivers/net/tun.ko
Python Exception <class 'gdb.error'> There is no member named name.:
Error occurred in Python: There is no member named name.
This patch fixes the issue taking the module name from the 'struct
attribute'.
Fixes: ed66f991bb19 ("module: Refactor section attr into bin attribute") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Kieran Bingham <kbingham@kernel.org> Link: http://lkml.kernel.org/r/20200722102239.313231-1-sgarzare@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping") Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200721171936.81563-1-michael.j.ruhl@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
scripts/decode_stacktrace: strip basepath from all paths
Currently the basepath is removed only from the beginning of the string.
When the symbol is inlined and there's multiple line outputs of
addr2line, only the first line would have basepath removed.
Change to remove the basepath prefix from all lines.
Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex") Co-developed-by: Shik Chen <shik@chromium.org> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Shik Chen <shik@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Jiri Slaby <jslaby@suse.cz> Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
squashfs: fix length field overlap check in metadata reading
This is a regression introduced by the "migrate from ll_rw_block usage
to BIO" patch.
Squashfs packs structures on byte boundaries, and due to that the length
field (of the metadata block) may not be fully in the current block.
The new code rewrote and introduced a faulty check for that edge case.
Fixes: 93e72b3c612adcaca1 ("squashfs: migrate from ll_rw_block usage to BIO") Reported-by: Bernd Amend <bernd.amend@gmail.com> Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Adrien Schildknecht <adrien+dev@schischi.me> Cc: Guenter Roeck <groeck@chromium.org> Cc: Daniel Rosenberg <drosen@google.com> Link: http://lkml.kernel.org/r/20200717195536.16069-1-phillip@squashfs.org.uk Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
khugepaged: fix null-pointer dereference due to race
khugepaged has to drop mmap lock several times while collapsing a page.
The situation can change while the lock is dropped and we need to
re-validate that the VMA is still in place and the PMD is still subject
for collapse.
But we miss one corner case: while collapsing an anonymous pages the VMA
could be replaced with file VMA. If the file VMA doesn't have any
private pages we get NULL pointer dereference:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
anon_vma_lock_write include/linux/rmap.h:120 [inline]
collapse_huge_page mm/khugepaged.c:1110 [inline]
khugepaged_scan_pmd mm/khugepaged.c:1349 [inline]
khugepaged_scan_mm_slot mm/khugepaged.c:2110 [inline]
khugepaged_do_scan mm/khugepaged.c:2193 [inline]
khugepaged+0x3bba/0x5a10 mm/khugepaged.c:2238
The fix is to make sure that the VMA is anonymous in
hugepage_vma_revalidate(). The helper is only used for collapsing
anonymous pages.
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Reported-by: syzbot+ed318e8b790ca72c5ad0@syzkaller.appspotmail.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Yang Shi <yang.shi@linux.alibaba.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200722121439.44328-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Barry Song [Fri, 24 Jul 2020 04:15:30 +0000 (21:15 -0700)]
mm/hugetlb: avoid hardcoding while checking if cma is enabled
hugetlb_cma[0] can be NULL due to various reasons, for example, node0
has no memory. so NULL hugetlb_cma[0] doesn't necessarily mean cma is
not enabled. gigantic pages might have been reserved on other nodes.
This patch fixes possible double reservation and CMA leak.
[akpm@linux-foundation.org: fix CONFIG_CMA=n warning]
[sfr@canb.auug.org.au: better checks before using hugetlb_cma] Link: http://lkml.kernel.org/r/20200721205716.6dbaa56b@canb.auug.org.au Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200710005726.36068-1-song.bao.hua@hisilicon.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Fri, 24 Jul 2020 04:15:27 +0000 (21:15 -0700)]
mm: memcg/slab: fix memory leak at non-root kmem_cache destroy
If the kmem_cache refcount is greater than one, we should not mark the
root kmem_cache as dying. If we mark the root kmem_cache dying
incorrectly, the non-root kmem_cache can never be destroyed. It
resulted in memory leak when memcg was destroyed. We can use the
following steps to reproduce.
1) Use kmem_cache_create() to create a new kmem_cache named A.
2) Coincidentally, the kmem_cache A is an alias for kmem_cache B,
so the refcount of B is just increased.
3) Use kmem_cache_destroy() to destroy the kmem_cache A, just
decrease the B's refcount but mark the B as dying.
4) Create a new memory cgroup and alloc memory from the kmem_cache
B. It leads to create a non-root kmem_cache for allocating memory.
5) When destroy the memory cgroup created in the step 4), the
non-root kmem_cache can never be destroyed.
If we repeat steps 4) and 5), this will cause a lot of memory leak. So
only when refcount reach zero, we mark the root kmem_cache as dying.
Fixes: 92ee383f6daa ("mm: fix race between kmem_cache destroy, create and deactivate") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200716165103.83462-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/memcg: fix refcount error while moving and swapping
It was hard to keep a test running, moving tasks between memcgs with
move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s
refcount is discovered to be 0 (supposedly impossible), so it is then
forced to REFCOUNT_SATURATED, and after thousands of warnings in quick
succession, the test is at last put out of misery by being OOM killed.
This is because of the way moved_swap accounting was saved up until the
task move gets completed in __mem_cgroup_clear_mc(), deferred from when
mem_cgroup_move_swap_account() actually exchanged old and new ids.
Concurrent activity can free up swap quicker than the task is scanned,
bringing id refcount down 0 (which should only be possible when
offlining).
Just skip that optimization: do that part of the accounting immediately.
Fixes: 615d66c37c75 ("mm: memcontrol: fix memcg id ref counter on swap charge move") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007071431050.4726@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prabhakar reported an OOPS inside mem_cgroup_get_nr_swap_pages()
function in a corner case seen on some arm64 boards when kdump kernel
runs with "cgroup_disable=memory" passed to the kdump kernel via
bootargs.
The root-cause behind the same is that currently mem_cgroup_swap_init()
function is implemented as a subsys_initcall() call instead of a
core_initcall(), this means 'cgroup_memory_noswap' still remains set to
the default value (false) even when memcg is disabled via
"cgroup_disable=memory" boot parameter.
This may result in premature OOPS inside mem_cgroup_get_nr_swap_pages()
function in corner cases:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
[0000000000000188] user address but active_mm is swapper
Internal error: Oops: 96000006 [#1] SMP
Modules linked in:
<..snip..>
Call trace:
mem_cgroup_get_nr_swap_pages+0x9c/0xf4
shrink_lruvec+0x404/0x4f8
shrink_node+0x1a8/0x688
do_try_to_free_pages+0xe8/0x448
try_to_free_pages+0x110/0x230
__alloc_pages_slowpath.constprop.106+0x2b8/0xb48
__alloc_pages_nodemask+0x2ac/0x2f8
alloc_page_interleave+0x20/0x90
alloc_pages_current+0xdc/0xf8
atomic_pool_expand+0x60/0x210
__dma_atomic_pool_init+0x50/0xa4
dma_atomic_pool_init+0xac/0x158
do_one_initcall+0x50/0x218
kernel_init_freeable+0x22c/0x2d0
kernel_init+0x18/0x110
ret_from_fork+0x10/0x18
Code: aa1403e39110600097f82a2714000011 (f940c663)
---[ end trace 9795948475817de4 ]---
Kernel panic - not syncing: Fatal exception
Rebooting in 10 seconds..
Fixes: eccb52e78809 ("mm: memcontrol: prepare swap controller setup for integration") Reported-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: James Morse <james.morse@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: http://lkml.kernel.org/r/1593641660-13254-2-git-send-email-bhsharma@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tom Rix [Fri, 24 Jul 2020 04:15:18 +0000 (21:15 -0700)]
mm: initialize return of vm_insert_pages
clang static analysis reports a garbage return
In file included from mm/memory.c:84:
mm/memory.c:1612:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
return err;
^~~~~~~~~~
The setting of err depends on a loop executing. So initialize err.
vfs/xattr: mm/shmem: kernfs: release simple xattr entry in a right way
After commit fdc85222d58e ("kernfs: kvmalloc xattr value instead of
kmalloc"), simple xattr entry is allocated with kvmalloc() instead of
kmalloc(), so we should release it with kvfree() instead of kfree().
Fixes: fdc85222d58e ("kernfs: kvmalloc xattr value instead of kmalloc") Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Daniel Xu <dxu@dxuuu.xyz> Cc: Chris Down <chris@chrisdown.name> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [5.7] Link: http://lkml.kernel.org/r/20200704051608.15043-1-cgxu519@mykernel.net Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/mmap.c: close race between munmap() and expand_upwards()/downwards()
VMA with VM_GROWSDOWN or VM_GROWSUP flag set can change their size under
mmap_read_lock(). It can lead to race with __do_munmap():
Thread A Thread B
__do_munmap()
detach_vmas_to_be_unmapped()
mmap_write_downgrade()
expand_downwards()
vma->vm_start = address;
// The VMA now overlaps with
// VMAs detached by the Thread A
// page fault populates expanded part
// of the VMA
unmap_region()
// Zaps pagetables partly
// populated by Thread B
Similar race exists for expand_upwards().
The fix is to avoid downgrading mmap_lock in __do_munmap() if detached
VMAs are next to VM_GROWSDOWN or VM_GROWSUP VMA.
[akpm@linux-foundation.org: s/mmap_sem/mmap_lock/ in comment]
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.20+] Link: http://lkml.kernel.org/r/20200709105309.42495-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp()
does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used
to work when this code was written, but then GDB started to validate si_code
and now it simply can't use breakpoints if the tracee has an active uprobe:
# gcc -g test.c -o test
# perf probe -x ./test -a unused_func
# perf record -e probe_test:unused_func gdb ./test -ex run
GNU gdb (GDB) 10.0.50.20200714-git
...
Program received signal SIGTRAP, Trace/breakpoint trap.
0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2
(gdb)
The tracee hits the internal breakpoint inserted by GDB to monitor shared
library events but GDB misinterprets this SIGTRAP and reports a signal.
Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user()
and fixes the problem.
This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally
wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP),
but this doesn't confuse GDB and needs another x86-specific patch.
Matthew Howell [Wed, 22 Jul 2020 20:11:24 +0000 (16:11 -0400)]
serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X
Sealevel XR17V35X based devices are inoperable on kernel versions
4.11 and above due to a change in the GPIO preconfiguration introduced in
commit 7dea8165f1d. This patch fixes this by preconfiguring the GPIO on Sealevel
cards to the value (0x00) used prior to commit 7dea8165f1d
With GPIOs preconfigured as per commit 7dea8165f1d all ports on
Sealevel XR17V35X based devices become stuck in high impedance
mode, regardless of dip-switch or software configuration. This
causes the device to become effectively unusable. This patch (in
various forms) has been distributed to our customers and no issues
related to it have been reported.
Cong Wang [Wed, 22 Jul 2020 23:31:54 +0000 (16:31 -0700)]
bonding: check return value of register_netdevice() in bond_newlink()
Very similar to commit 544f287b8495
("bonding: check error value of register_netdevice() immediately"),
we should immediately check the return value of register_netdevice()
before doing anything else.
Fixes: 005db31d5f5f ("bonding: set carrier off for devices created through netlink") Reported-and-tested-by: syzbot+bbc3a11c4da63c1b74d6@syzkaller.appspotmail.com Cc: Beniamino Galvani <bgalvani@redhat.com> Cc: Taehee Yoo <ap420073@gmail.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Upon additional testing with older servers, it was found that
the original commit introduced a regression when using the old SMB1
dialect and rsyncing over an existing file.
The patch will need to be respun to address this, likely including
a larger refactoring of the SMB1 and SMB3 rename code paths to make
it less confusing and also to address some additional rename error
cases that SMB3 may be able to workaround.
Signed-off-by: Steve French <stfrench@microsoft.com> Reported-by: Patrick Fernie <patrick.fernie@gmail.com> CC: Stable <stable@vger.kernel.org> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Acked-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Merge tag 's390-5.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into master
Pull s390 fixes from Heiko Carstens:
- Change cpum_cf/perf counter name from DFLT_CCERROR to DFLT_CCFINISH
to reflect reality and avoid further confusion. This is a user space
visible change therefore the commit has also a stable tag for 5.7,
where this counter was introduced.
- Add Matthew Rosato as s390 IOMMU maintainer.
* tag 's390-5.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add Matthew for s390 IOMMU
s390/cpum_cf,perf: change DFLT_CCERROR counter name
Douglas Anderson [Wed, 22 Jul 2020 22:00:21 +0000 (15:00 -0700)]
i2c: i2c-qcom-geni: Fix DMA transfer race
When I have KASAN enabled on my kernel and I start stressing the
touchscreen my system tends to hang. The touchscreen is one of the
only things that does a lot of big i2c transfers and ends up hitting
the DMA paths in the geni i2c driver. It appears that KASAN adds
enough delay in my system to tickle a race condition in the DMA setup
code.
When the system hangs, I found that it was running the geni_i2c_irq()
over and over again. It had these:
Notably we're in DMA mode but are getting M_RX_IRQ_EN and
M_RX_FIFO_WATERMARK_EN over and over again.
Putting some traces in geni_i2c_rx_one_msg() showed that when we
failed we were getting to the start of geni_i2c_rx_one_msg() but were
never executing geni_se_rx_dma_prep().
I believe that the problem here is that we are starting the geni
command before we run geni_se_rx_dma_prep(). If a transfer makes it
far enough before we do that then we get into the state I have
observed. Let's change the order, which seems to work fine.
Although problems were seen on the RX path, code inspection suggests
that the TX should be changed too. Change it as well.
Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Wolfram Sang [Sat, 4 Jul 2020 13:38:29 +0000 (15:38 +0200)]
i2c: rcar: always clear ICSAR to avoid side effects
On R-Car Gen2, we get a timeout when reading from the address set in
ICSAR, even though the slave interface is disabled. Clearing it fixes
this situation. Note that Gen3 is not affected.
To reproduce: bind and undbind an I2C slave on some bus, run
'i2cdetect' on that bus.
Fixes: de20d1857dd6 ("i2c: rcar: add slave support") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight. It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.
The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.
Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.
Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 23 Jul 2020 14:49:57 +0000 (17:49 +0300)]
AX.25: Prevent integer overflows in connect and sendmsg
We recently added some bounds checking in ax25_connect() and
ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because
they were no longer required.
Unfortunately, I believe they are required to prevent integer overflows
so I have added them back.
Fixes: 8885bb0621f0 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()") Fixes: 2f2a7ffad5c6 ("AX.25: Fix out-of-bounds read in ax25_connect()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work)
2. integrity_recalc (&ic->recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.
To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().
Pavel Begunkov [Thu, 23 Jul 2020 17:17:20 +0000 (20:17 +0300)]
io_uring: missed req_init_async() for IOSQE_ASYNC
IOSQE_ASYNC branch of io_queue_sqe() is another place where an
unitialised req->work can be accessed (i.e. prior io_req_init_async()).
Nothing really bad though, it just looses IO_WQ_WORK_CONCURRENT flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Andy Shevchenko [Thu, 16 Jul 2020 18:27:47 +0000 (21:27 +0300)]
device property: Avoid NULL pointer dereference in device_get_next_child_node()
When we have no primary fwnode or when it's a software node, we may end up
in the situation when fwnode is a NULL pointer. There is no point to look for
secondary fwnode in such case. Add a necessary check to a condition.
Fixes: 114dbb4fa7c4 ("drivers property: When no children in primary, try secondary") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Link: https://lore.kernel.org/r/20200716182747.54929-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins.
syzbot is reporting general protection fault in bitfill_aligned() [1]
caused by integer underflow in bit_clear_margins(). The cause of this
problem is when and how do_vc_resize() updates vc->vc_{cols,rows}.
If vc_do_resize() fails (e.g. kzalloc() fails) when var.xres or var.yres
is going to shrink, vc->vc_{cols,rows} will not be updated. This allows
bit_clear_margins() to see info->var.xres < (vc->vc_cols * cw) or
info->var.yres < (vc->vc_rows * ch). Unexpectedly large rw or bh will
try to overrun the __iomem region and causes general protection fault.
Also, vc_resize(vc, 0, 0) does not set vc->vc_{cols,rows} = 0 due to
Of course, callers of vc_resize() are not handling vc_do_resize() failure
is bad. But we can't avoid vc_resize(vc, 0, 0) which returns 0. Therefore,
as a band-aid workaround, this patch checks integer underflow in
"struct fbcon_ops"->clear_margins call, assuming that
vc->vc_cols * vc->vc_font.width and vc->vc_rows * vc->vc_font.heigh do not
cause integer overflow.
Jon Hunter [Wed, 15 Jul 2020 11:38:42 +0000 (12:38 +0100)]
usb: tegra: Fix allocation for the FPCI context
Commit 5c4e8d3781bc ("usb: host: xhci-tegra: Add support for XUSB
context save/restore") is using the IPFS 'num_offsets' value when
allocating memory for FPCI context instead of the FPCI 'num_offsets'.
After commit cad064f1bd52 ("devres: handle zero size in devm_kmalloc()")
was added system suspend started failing on Tegra186. The kernel log
showed that the Tegra XHCI driver was crashing on entry to suspend when
attempting the save the USB context. On Tegra186, the IPFS context has a
zero length but the FPCI content has a non-zero length, and because of
the bug in the Tegra XHCI driver we are incorrectly allocating a zero
length array for the FPCI context. The crash seen on entering suspend
when we attempt to save the FPCI context and following commit cad064f1bd52 ("devres: handle zero size in devm_kmalloc()") this now
causes a NULL pointer deference when we access the memory. Fix this by
correcting the amount of memory we are allocating for FPCI contexts.
Cc: stable@vger.kernel.org Fixes: 5c4e8d3781bc ("usb: host: xhci-tegra: Add support for XUSB context save/restore") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200715113842.30680-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arm64: vdso32: Fix '--prefix=' value for newer versions of clang
Newer versions of clang only look for $(COMPAT_GCC_TOOLCHAIN_DIR)as [1],
rather than $(COMPAT_GCC_TOOLCHAIN_DIR)$(CROSS_COMPILE_COMPAT)as,
resulting in the following build error:
$ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \
CROSS_COMPILE_COMPAT=arm-linux-gnueabi- LLVM=1 O=out/aarch64 distclean \
defconfig arch/arm64/kernel/vdso32/
...
/home/nathan/cbl/toolchains/llvm-binutils/bin/as: unrecognized option '-EL'
clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)
make[3]: *** [arch/arm64/kernel/vdso32/Makefile:181: arch/arm64/kernel/vdso32/note.o] Error 1
...
Adding the value of CROSS_COMPILE_COMPAT (adding notdir to account for a
full path for CROSS_COMPILE_COMPAT) fixes this issue, which matches the
solution done for the main Makefile [2].
Georgi Djakov [Thu, 23 Jul 2020 08:37:34 +0000 (11:37 +0300)]
interconnect: Do not skip aggregation for disabled paths
When an interconnect path is being disabled, currently we don't aggregate
the requests for it afterwards. But the re-aggregation step shouldn't be
skipped, as it may leave the nodes with outdated bandwidth data. This
outdated data may actually keep the path still enabled and prevent the
device from going into lower power states.
Eric Biggers [Thu, 16 Jul 2020 06:05:53 +0000 (23:05 -0700)]
/dev/mem: Add missing memory barriers for devmem_inode
WRITE_ONCE() isn't the correct way to publish a pointer to a data
structure, since it doesn't include a write memory barrier. Therefore
other tasks may see that the pointer has been set but not see that the
pointed-to memory has finished being initialized yet. Instead a
primitive with "release" semantics is needed.
Use smp_store_release() for this.
The use of READ_ONCE() on the read side is still potentially correct if
there's no control dependency, i.e. if all memory being "published" is
transitively reachable via the pointer itself. But this pairing is
somewhat confusing and error-prone. So just upgrade the read side to
smp_load_acquire() so that it clearly pairs with smp_store_release().
Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable <stable@vger.kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20200716060553.24618-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is reporting that mmput() from shrinker function has a risk of
deadlock [1], for delayed_uprobe_add() from update_ref_ctr() calls
kzalloc(GFP_KERNEL) with delayed_uprobe_lock held, and
uprobe_clear_state() from __mmput() also holds delayed_uprobe_lock.
Commit a1b2289cef92ef0e ("android: binder: drop lru lock in isolate
callback") replaced mmput() with mmput_async() in order to avoid sleeping
with spinlock held. But this patch replaces mmput() with mmput_async() in
order not to start __mmput() from shrinker context.
Fangrui Song [Tue, 21 Jul 2020 17:31:23 +0000 (10:31 -0700)]
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if
$(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit,
GCC_TOOLCHAIN_DIR will be set to /usr/bin/. --prefix= will be set to
/usr/bin/ and Clang as of 11 will search for both
$(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle.
GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle,
$(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice,
$(prefix)aarch64-linux-gnu/$needle rarely contains executables.
To better model how GCC's -B/--prefix takes in effect in practice, newer
Clang (since
https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90)
only searches for $(prefix)$needle. Currently it will find /usr/bin/as
instead of /usr/bin/aarch64-linux-gnu-as.
Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
(/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the
appropriate cross compiling GNU as (when -no-integrated-as is in
effect).
This patch fixes PTP on AQC10X.
PTP support on AQC10X requires FW involvement and FW configures the
TPS data arb mode itself.
So we must make sure driver doesn't touch TPS data arb mode on AQC10x
if PTP is enabled. Otherwise, there are no timestamps even though
packets are flowing.
Fixes: 2deac71ac492a ("net: atlantic: QoS implementation: min_rate") Signed-off-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peilin Ye [Wed, 22 Jul 2020 16:05:12 +0000 (12:05 -0400)]
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
Checks on `addr_len` and `usax->sax25_ndigis` are insufficient.
ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7
or 8. Fix it.
It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 22 Jul 2020 15:52:12 +0000 (23:52 +0800)]
sctp: shrink stream outq when fails to do addstream reconf
When adding a stream with stream reconf, the new stream firstly is in
CLOSED state but new out chunks can still be enqueued. Then once gets
the confirmation from the peer, the state will change to OPEN.
However, if the peer denies, it needs to roll back the stream. But when
doing that, it only sets the stream outcnt back, and the chunks already
in the new stream don't get purged. It caused these chunks can still be
dequeued in sctp_outq_dequeue_data().
As its stream is still in CLOSE, the chunk will be enqueued to the head
again by sctp_outq_head_data(). This chunk will never be sent out, and
the chunks after it can never be dequeued. The assoc will be 'hung' in
a dead loop of sending this chunk.
To fix it, this patch is to purge these chunks already in the new
stream by calling sctp_stream_shrink_out() when failing to do the
addstream reconf.
Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 22 Jul 2020 15:52:11 +0000 (23:52 +0800)]
sctp: shrink stream outq only when new outcnt < old outcnt
It's not necessary to go list_for_each for outq->out_chunk_list
when new outcnt >= old outcnt, as no chunk with higher sid than
new (outcnt - 1) exists in the outqueue.
While at it, also move the list_for_each code in a new function
sctp_stream_shrink_out(), which will be used in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peilin Ye [Wed, 22 Jul 2020 15:19:01 +0000 (11:19 -0400)]
AX.25: Fix out-of-bounds read in ax25_connect()
Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient.
ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis`
equals to 7 or 8. Fix it.
This issue has been reported as a KMSAN uninit-value bug, because in such
a case, ax25_connect() reaches into the uninitialized portion of the
`struct sockaddr_storage` statically allocated in __sys_connect().
It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`.
For ENETC ports that register an external MDIO bus,
the bus doesn't get removed on the error bailout path
of enetc_pf_probe().
This issue became much more visible after recent:
commit 07095c025ac2 ("net: enetc: Use DT protocol information to set up the ports")
Before this commit, one could make probing fail on the error
path only by having register_netdev() fail, which is unlikely.
But after this commit, because it moved the enetc_of_phy_get()
call up in the probing sequence, now we can trigger an mdiobus_free()
bug just by forcing enetc_alloc_msix() to return error, i.e. with the
'pci=nomsi' kernel bootarg (since ENETC relies on MSI support to work),
as the calltrace below shows:
Thomas Gleixner [Wed, 22 Jul 2020 22:46:44 +0000 (00:46 +0200)]
Merge tag 'efi-urgent-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull EFI fixes from Ard Biesheuvel:
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Some fixes for build issues found by Atish while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64
- Some x86 EFI stub cleanups from Arvind
Thomas Gleixner [Wed, 22 Jul 2020 08:39:54 +0000 (10:39 +0200)]
x86/dumpstack: Dump user space code correctly again
H.J. reported that post 5.7 a segfault of a user space task does not longer
dump the Code bytes when /proc/sys/debug/exception-trace is enabled. It
prints 'Code: Bad RIP value.' instead.
This was broken by a recent change which made probe_kernel_read() reject
non-kernel addresses.
Update show_opcodes() so it retrieves user space opcodes via
copy_from_user_nmi().
x86/stacktrace: Fix reliable check for empty user task stacks
If a user task's stack is empty, or if it only has user regs, ORC
reports it as a reliable empty stack. But arch_stack_walk_reliable()
incorrectly treats it as unreliable.
That happens because the only success path for user tasks is inside the
loop, which only iterates on non-empty stacks. Generally, a user task
must end in a user regs frame, but an empty stack is an exception to
that rule.
Thanks to commit 71c95825289f ("x86/unwind/orc: Fix error handling in
__unwind_start()"), unwind_start() now sets state->error appropriately.
So now for both ORC and FP unwinders, unwind_done() and !unwind_error()
always means the end of the stack was successfully reached. So the
success path for kthreads is no longer needed -- it can also be used for
empty user tasks.
The ORC unwinder fails to unwind newly forked tasks which haven't yet
run on the CPU. It correctly reads the 'ret_from_fork' instruction
pointer from the stack, but it incorrectly interprets that value as a
call stack address rather than a "signal" one, so the address gets
incorrectly decremented in the call to orc_find(), resulting in bad ORC
data.
Fix it by forcing 'ret_from_fork' frames to be signal frames.
J. Bruce Fields [Wed, 15 Jul 2020 17:31:36 +0000 (13:31 -0400)]
nfsd4: fix NULL dereference in nfsd/clients display code
We hold the cl_lock here, and that's enough to keep stateid's from going
away, but it's not enough to prevent the files they point to from going
away. Take fi_lock and a reference and check for NULL, as we do in
other code.
Reported-by: NeilBrown <neilb@suse.de> Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens") Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Merge tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the upcoming atomisp driver. They solve issues
when probing atomisp on devices with multiple cameras and get rid of
warnings when built with W=1.
The diffstat is a bit long, as this driver has several abstractions.
The patches that solved the issues with W=1 had to get rid of some
duplicated code (there used to have 2 versions of the same code, one
for ISP2401 and another one for ISP2400).
As this driver is not in 5.7, such changes won't cause regressions"
* tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits)
Revert "media: atomisp: keep the ISP powered on when setting it"
media: atomisp: fix mask and shift operation on ISPSSPM0
media: atomisp: move system_local consts into a C file
media: atomisp: get rid of version-specific system_local.h
media: atomisp: move global stuff into a common header
media: atomisp: remove non-used 32-bits consts at system_local
media: atomisp: get rid of some unused static vars
media: atomisp: Fix error code in ov5693_probe()
media: atomisp: Replace trace_printk by pr_info
media: atomisp: Fix __func__ style warnings
media: atomisp: fix help message for ISP2401 selection
media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue.
media: atomisp: make const arrays static, makes object smaller
media: atomisp: Clean up non-existing folders from Makefile
media: atomisp: Get rid of ACPI specifics in gmin_subdev_add()
media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add()
media: atomisp: Use temporary variable for device in gmin_subdev_add()
media: atomisp: Refactor PMIC detection to a separate function
media: atomisp: Deduplicate return ret in gmin_i2c_write()
media: atomisp: Make pointer to PMIC client global
...
projects / mirror_ubuntu-kernels.git / log