Linus Torvalds [Fri, 23 Oct 2020 20:56:34 +0000 (13:56 -0700)]
Merge tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"This should be the last round of things for rc1, a bunch of i915
fixes, some amdgpu, more font OOB fixes and one ttm fix just found
reading code:
i915:
- Tweak initial DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)"
* tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm: (31 commits)
drm/amdgpu: correct the cu and rb info for sienna cichlid
drm/amd/pm: remove the average clock value in sysfs
drm/amd/pm: fix pp_dpm_fclk
Revert drm/amdgpu: disable sienna chichlid UMC RAS
drm/amd/pm: fix pcie information for sienna cichlid
drm/amdkfd: Use same SQ prefetch setting as amdgpu
drm/amd/swsmu: correct wrong feature bit mapping
drm/amd/psp: Fix sysfs: cannot create duplicate filename
drm/amd/display: Avoid MST manager resource leak.
drm/amd/display: Revert "drm/amd/display: Fix a list corruption"
drm/amdgpu: update golden setting for sienna_cichlid
drm/amd/swsmu: add missing feature map for sienna_cichlid
drm/amdgpu: correct the gpu reset handling for job != NULL case
drm/amdgpu: add rlc iram and dram firmware support
drm/amdgpu: add function to program pbb mode for sienna cichlid
drm/i915: Drop runtime-pm assert from vgpu io accessors
drm/i915: Force VT'd workarounds when running as a guest OS
drm/i915: Exclude low pages (128KiB) of stolen from use
drm/i915/gt: Onion unwind for scratch page allocation failure
drm/ttm: fix eviction valuable range check.
...
You can define a local register variable and associate it with a
specified register...
The only supported use for this feature is to specify registers for
input and output operands when calling Extended asm (see Extended
Asm). This may be necessary if the constraints for a particular
machine don't provide sufficient control to select the desired
register.
On 32-bit x86, this is used to ensure that gcc will put an 8-byte value
into the %edx:%eax pair, while all other cases will just use the single
register %eax (%rax on x86-64). While the _ASM_AX actually just expands
to "%eax", note this comment next to get_user() which does something
very similar:
* The use of _ASM_DX as the register specifier is a bit of a
* simplification, as gcc only cares about it as the starting point
* and not size: for a 64-bit value it will use %ecx:%edx on 32 bits
* (%ecx being the next register in gcc's x86 register sequence), and
* %rdx on 64 bits.
However, getting this to work requires that there is no code between the
assignment to the local register variable and its use as an input to the
asm() which can possibly clobber any of the registers involved -
including evaluation of the expressions making up other inputs.
In the current code, the ptr expression used directly as an input may
cause such code to be emitted. For example, Sean Christopherson
observed that with KASAN enabled and ptr being current->set_child_tid
(from chedule_tail()), the load of current->set_child_tid causes a call
to __asan_load8() to be emitted immediately prior to the __put_user_4
call, and Naresh Kamboju reports that various mmstress tests fail on
KASAN-enabled builds.
It's also possible to synthesize a broken case without KASAN if one uses
"foo()" as the ptr argument, with foo being some "extern u64 __user
*foo(void);" (though I don't know if that appears in real code).
Fix it by making sure ptr gets evaluated before the assignment to
__val_pu, and add a comment that __val_pu must be the last thing
computed before the asm() is entered.
Cc: Sean Christopherson <sean.j.christopherson@intel.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: d55564cfc222 ("x86: Make __put_user() generate an out-of-line call") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 23 Oct 2020 19:05:49 +0000 (12:05 -0700)]
Merge tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystem
Current release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
Linus Torvalds [Fri, 23 Oct 2020 18:47:42 +0000 (11:47 -0700)]
Merge tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Use iomap for non-journaled buffered I/O. This largely eliminates
buffer heads on filesystems where the block size matches the page
size. Many thanks to Christoph Hellwig for this patch!
- Fixes for some more journaled data filesystem bugs, found by running
xfstests with data journaling on for all files (chattr +j $MNT) (Bob
Peterson)
- gfs2_evict_inode refactoring (Bob Peterson)
- Use the statfs data in the journal during recovery instead of reading
it in from the local statfs inodes (Abhi Das)
- Several other minor fixes by various people
* tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (30 commits)
gfs2: Recover statfs info in journal head
gfs2: lookup local statfs inodes prior to journal recovery
gfs2: Add fields for statfs info in struct gfs2_log_header_host
gfs2: Ignore subsequent errors after withdraw in rgrp_go_sync
gfs2: Eliminate gl_vm
gfs2: Only access gl_delete for iopen glocks
gfs2: Fix comments to glock_hash_walk
gfs2: eliminate GLF_QUEUED flag in favor of list_empty(gl_holders)
gfs2: Ignore journal log writes for jdata holes
gfs2: simplify gfs2_block_map
gfs2: Only set PageChecked if we have a transaction
gfs2: don't lock sd_ail_lock in gfs2_releasepage
gfs2: make gfs2_ail1_empty_one return the count of active items
gfs2: Wipe jdata and ail1 in gfs2_journal_wipe, formerly gfs2_meta_wipe
gfs2: enhance log_blocks trace point to show log blocks free
gfs2: add missing log_blocks trace points in gfs2_write_revokes
gfs2: rename gfs2_write_full_page to gfs2_write_jdata_page, remove parm
gfs2: add validation checks for size of superblock
gfs2: use-after-free in sysfs deregistration
gfs2: Fix NULL pointer dereference in gfs2_rgrp_dump
...
Linus Torvalds [Fri, 23 Oct 2020 18:41:39 +0000 (11:41 -0700)]
Merge tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- add support for recognizing special file types (char/block/fifo/
symlink) for files created by Linux on WSL (a format we plan to move
to as the default for creating special files on Linux, as it has
advantages over the other current option, the SFU format) in readdir.
- fix double queries to root directory when directory leases not
supported (e.g. Samba)
- fix querying mode bits (modefromsid mount option) for special file
types
- stronger encryption (gcm256), disabled by default until tested more
broadly
- allow querying owner when server reports 'well known SID' on query
dir with SMB3.1.1 POSIX extensions
* tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (30 commits)
SMB3: add support for recognizing WSL reparse tags
cifs: remove bogus debug code
smb3.1.1: fix typo in compression flag
cifs: move smb version mount options into fs_context.c
cifs: move cache mount options to fs_context.ch
cifs: move security mount options into fs_context.ch
cifs: add files to host new mount api
smb3: do not try to cache root directory if dir leases not supported
smb3: fix stat when special device file and mounted with modefromsid
cifs: Print the address and port we are connecting to in generic_ip_connect()
SMB3: Resolve data corruption of TCP server info fields
cifs: make const array static, makes object smaller
SMB3.1.1: Fix ids returned in POSIX query dir
smb3: add dynamic trace point to trace when credits obtained
smb3.1.1: do not fail if no encryption required but server doesn't support it
cifs: Return the error from crypt_message when enc/dec key not found.
smb3.1.1: set gcm256 when requested
smb3.1.1: rename nonces used for GCM and CCM encryption
smb3.1.1: print warning if server does not support requested encryption type
smb3.1.1: add new module load parm enable_gcm_256
...
Linus Torvalds [Fri, 23 Oct 2020 18:33:41 +0000 (11:33 -0700)]
Merge tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull clone/dedupe/remap code refactoring from Darrick Wong:
"Move the generic file range remap (aka reflink and dedupe) functions
out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to
reduce clutter in the first two files"
* tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: move the generic write and copy checks out of mm
vfs: move the remap range helpers to remap_range.c
vfs: move generic_remap_checks out of mm
Linus Torvalds [Fri, 23 Oct 2020 18:17:56 +0000 (11:17 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
Linus Torvalds [Fri, 23 Oct 2020 18:00:57 +0000 (11:00 -0700)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost, vdpa, and virtio cleanups and fixes
A very quiet cycle, no new features"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
MAINTAINERS: add URL for virtio-mem
vhost_vdpa: remove unnecessary spin_lock in vhost_vring_call
vringh: fix __vringh_iov() when riov and wiov are different
vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK
s390: virtio: PV needs VIRTIO I/O device protection
virtio: let arch advertise guest's memory access restrictions
vhost_vdpa: Fix duplicate included kernel.h
vhost: reduce stack usage in log_used
virtio-mem: Constify mem_id_table
virtio_input: Constify id_table
virtio-balloon: Constify id_table
vdpa/mlx5: Fix failure to bring link up
vdpa/mlx5: Make use of a specific 16 bit endianness API
Linus Torvalds [Fri, 23 Oct 2020 17:54:13 +0000 (10:54 -0700)]
Merge tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros-ec:
- Error code cleanup across cros-ec by Guenter
- Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status
cros_ec_typec:
- Landed initial USB4 support in typec connector class driver for
cros_ec
- Role switch bugfix on disconnect, and reordering configuration
steps
cros_ec_lightbar:
- Fix buffer outsize and result for get_lightbar_version
misc:
- Remove config MFD_CROS_EC, now that transition from MFD is complete
- Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard
keymap"
* tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA
platform/chrome: Use kobj_to_dev() instead of container_of()
platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer()
platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites
platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config
platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
platform/chrome: cros_ec_trace: Add fields to command traces
platform/chrome: cros_ec_typec: Re-order connector configuration steps
platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect
platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()
platform/chrome: cros_ec_typec: USB4 support
pwm: cros-ec: Simplify EC error handling
platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT
pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
platform/chrome: cros_ec_sysfs: Report range of error codes from EC
cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status
iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
Linus Torvalds [Fri, 23 Oct 2020 17:06:38 +0000 (10:06 -0700)]
Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
Linus Torvalds [Fri, 23 Oct 2020 16:46:16 +0000 (09:46 -0700)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Will Deacon:
"A small selection of further arm64 fixes and updates. Most of these
are fixes that came in during the merge window, with the exception of
the HAVE_MOVE_PMD mremap() speed-up which we discussed back in 2018
and somehow forgot to enable upstream.
- Improve performance of Spectre-v2 mitigation on Falkor CPUs (if
you're lucky enough to have one)
- Select HAVE_MOVE_PMD. This has been shown to improve mremap()
performance, which is used heavily by the Android runtime GC, and
it seems we forgot to enable this upstream back in 2018.
- Ensure linker flags are consistent between LLVM and BFD
- Fix stale comment in Spectre mitigation rework
- Fix broken copyright header
- Fix KASLR randomisation of the linear map
- Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)"
Link: https://lore.kernel.org/kvmarm/20181108181201.88826-3-joelaf@google.com/
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: proton-pack: Update comment to reflect new function name
arm64: spectre-v2: Favour CPU-specific mitigation at EL2
arm64: link with -z norelro regardless of CONFIG_RELOCATABLE
arm64: Fix a broken copyright header in gen_vdso_offsets.sh
arm64: mremap speedup - Enable HAVE_MOVE_PMD
arm64: mm: use single quantity to represent the PA to VA translation
arm64: reject prctl(PR_PAC_RESET_KEYS) on compat tasks
Abhi Das [Tue, 20 Oct 2020 20:58:05 +0000 (15:58 -0500)]
gfs2: Recover statfs info in journal head
Apply the outstanding statfs changes in the journal head to the
master statfs file. Zero out the local statfs file for good measure.
Previously, statfs updates would be read in from the local statfs inode and
synced to the master statfs inode during recovery.
We now use the statfs updates in the journal head to update the master statfs
inode instead of reading in from the local statfs inode. To preserve backward
compatibility with kernels that can't do this, we still need to keep the
local statfs inode up to date by writing changes to it. At some point in the
future, we can do away with the local statfs inodes altogether and keep the
statfs changes solely in the journal.
Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Abhi Das [Tue, 20 Oct 2020 20:58:04 +0000 (15:58 -0500)]
gfs2: lookup local statfs inodes prior to journal recovery
We need to lookup the master statfs inode and the local statfs
inodes earlier in the mount process (in init_journal) so journal
recovery can use them when it attempts to recover the statfs info.
We lookup all the local statfs inodes and store them in a linked
list to allow a node to recover statfs info for other nodes in the
cluster.
Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:27:00 +0000 (11:27 -0700)]
kvm: x86/mmu: NX largepage recovery for TDP MMU
When KVM maps a largepage backed region at a lower level in order to
make it executable (i.e. NX large page shattering), it reduces the TLB
performance of that region. In order to avoid making this degradation
permanent, KVM must periodically reclaim shattered NX largepages by
zapping them and allowing them to be rebuilt in the page fault handler.
With this patch, the TDP MMU does not respect KVM's rate limiting on
reclaim. It traverses the entire TDP structure every time. This will be
addressed in a future patch.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-21-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:59 +0000 (11:26 -0700)]
kvm: x86/mmu: Don't clear write flooding count for direct roots
Direct roots don't have a write flooding count because the guest can't
affect that paging structure. Thus there's no need to clear the write
flooding count on a fast CR3 switch for direct roots.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-20-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:58 +0000 (11:26 -0700)]
kvm: x86/mmu: Support MMIO in the TDP MMU
In order to support MMIO, KVM must be able to walk the TDP paging
structures to find mappings for a given GFN. Support this walk for
the TDP MMU.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
v2: Thanks to Dan Carpenter and kernel test robot for finding that root
was used uninitialized in get_mmio_spte.
Signed-off-by: Ben Gardon <bgardon@google.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20201014182700.2888246-19-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:57 +0000 (11:26 -0700)]
kvm: x86/mmu: Support write protection for nesting in tdp MMU
To support nested virtualization, KVM will sometimes need to write
protect pages which are part of a shadowed paging structure or are not
writable in the shadowed paging structure. Add a function to write
protect GFN mappings for this purpose.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-18-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:56 +0000 (11:26 -0700)]
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
Dirty logging ultimately breaks down MMU mappings to 4k granularity.
When dirty logging is no longer needed, these granaular mappings
represent a useless performance penalty. When dirty logging is disabled,
search the paging structure for mappings that could be re-constituted
into a large page mapping. Zap those mappings so that they can be
faulted in again at a higher mapping level.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-17-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:55 +0000 (11:26 -0700)]
kvm: x86/mmu: Support dirty logging for the TDP MMU
Dirty logging is a key feature of the KVM MMU and must be supported by
the TDP MMU. Add support for both the write protection and PML dirty
logging modes.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-16-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:54 +0000 (11:26 -0700)]
kvm: x86/mmu: Support changed pte notifier in tdp MMU
In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
a hook and handle the change_pte MMU notifier.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-15-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:53 +0000 (11:26 -0700)]
kvm: x86/mmu: Add access tracking for tdp_mmu
In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. The
main Linux MM uses the access tracking MMU notifiers for swap and other
features. Add hooks to handle the test/flush HVA (range) family of
MMU notifiers.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-14-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:52 +0000 (11:26 -0700)]
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
hooks to handle the invalidate range family of MMU notifiers.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-13-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:51 +0000 (11:26 -0700)]
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
Attach struct kvm_mmu_pages to every page in the TDP MMU to track
metadata, facilitate NX reclaim, and enable inproved parallelism of MMU
operations in future patches.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-12-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:50 +0000 (11:26 -0700)]
kvm: x86/mmu: Add TDP MMU PF handler
Add functions to handle page faults in the TDP MMU. These page faults
are currently handled in much the same way as the x86 shadow paging
based MMU, however the ordering of some operations is slightly
different. Future patches will add eager NX splitting, a fast page fault
handler, and parallel page faults.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-11-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dave Airlie [Thu, 22 Oct 2020 23:46:18 +0000 (09:46 +1000)]
Merge tag 'drm-intel-next-fixes-2020-10-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Tweak initia DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
Linus Torvalds [Thu, 22 Oct 2020 20:20:39 +0000 (13:20 -0700)]
Merge tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- Remove unused or useless code from qconf
- Allow to edit "int", "hex", "string" options in place, and remove the
separate edit box from qconf
* tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: create QApplication after option checks
kconfig: qconf: remove Y, M, N columns
kconfig: qconf: remove ConfigView class
kconfig: qconf: move setShowName/Range() to ConfigList from ConfigView
kconfig: qconf: remove ConfigLineEdit class
kconfig: qconf: allow to edit "int", "hex", "string" menus in-place
kconfig: qconf: show data column all the time
kconfig: qconf: move ConfigView::updateList(All) to ConfigList class
kconfig: qconf: remove unused ConfigItem::okRename()
kconfig: qconf: update the intro message to match to the current code
kconfig: qconf: reformat the intro message
Linus Torvalds [Thu, 22 Oct 2020 20:13:57 +0000 (13:13 -0700)]
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
Linus Torvalds [Thu, 22 Oct 2020 20:08:57 +0000 (13:08 -0700)]
Merge tag 'modules-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Code cleanups: more informative error messages and statically
initialize init_free_wq to avoid a workqueue warning"
* tag 'modules-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: statically initialize init section freeing data
module: Add more error message for failed kernel module loading
* tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
vfio/pci: Clear token on bypass registration failure
vfio/fsl-mc: fix the return of the uninitialized variable ret
vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger
vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit
MAINTAINERS: Add entry for s390 vfio-pci
vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO
vfio/fsl-mc: Add support for device reset
vfio/fsl-mc: Add read/write support for fsl-mc devices
vfio/fsl-mc: trigger an interrupt via eventfd
vfio/fsl-mc: Add irq infrastructure for fsl-mc devices
vfio/fsl-mc: Added lock support in preparation for interrupt handling
vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions
vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call
vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl
vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind
vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO
s390/pci: track whether util_str is valid in the zpci_dev
s390/pci: stash version in the zpci_dev
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices
...
Linus Torvalds [Thu, 22 Oct 2020 19:58:21 +0000 (12:58 -0700)]
Merge tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This introduces rpmsg_char support for GLINK and fixes a few issues"
* tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: glink: Expose rpmsg name attr for glink
rpmsg: glink: Add support for rpmsg glink chrdev
rpmsg: Guard against null endpoint ops in destroy
rpmsg: glink: Use complete_all for open states
rpmsg: virtio: fix compilation warning for virtio_rpmsg_channel description
rpmsg: Avoid double-free in mtk_rpmsg_register_device
rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()
Linus Torvalds [Thu, 22 Oct 2020 19:56:33 +0000 (12:56 -0700)]
Merge tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for the Mediatek MT9182 SCP and controlling
the Cortex R5F processors found in TI K3 platforms. It clones the
longstanding debugfs interface for controlling crash handling to
sysfs. Lastly it solves a bug where after a warm reset of Qualcomm
platforms the modem would crash upon first boot"
* tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
remoteproc/mediatek: Remove non-standard dsb()
remoteproc: Add recovery configuration to the sysfs interface
remoteproc: Add coredump as part of sysfs interface
remoteproc: Change default dump configuration to "disabled"
remoteproc: k3-r5: Add loading support for on-chip SRAM regions
remoteproc: k3-r5: Initialize TCM memories for ECC
remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem
dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs
remoteproc/mediatek: Add support for mt8192 SCP
remoteproc: Fixup coredump debugfs disable request
remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot
remoteproc/mediatek: fix null pointer dereference on null scp pointer
remoteproc: stm32: Fix pointer assignement
remoteproc: scp: add COMPILE_TEST dependency
Linus Torvalds [Thu, 22 Oct 2020 19:53:28 +0000 (12:53 -0700)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This contains no changes to the core framework. It is a collection of
various clk driver updates.
The biggest driver updates in terms of lines of code is the Allwinner
driver, closely followed by the Qualcomm and Mediatek drivers. All of
those hit high because we add so many lines of clk data. Coming in
fourth place is i.MX which also adds a bunch of clk data. This
accounts for the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for
various clk drivers that have baked in linux-next for a while. I
suppose one highlight or theme is that more clk drivers are being
updated to work as modules, which is interesting to see such critical
SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being
dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware
documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
clk: imx8mq: Fix usdhc parents order
clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
clk: Restrict CLK_HSDK to ARC_SOC_HSDK
clk: at91: sam9x60: support only two programmable clocks
clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
clk: ingenic: Use readl_poll_timeout instead of custom loop
clk: ingenic: Use to_clk_info() macro for all clocks
clk: bcm2835: add missing release if devm_clk_hw_register fails
clk: at91: clk-sam9x60-pll: remove unused variable
clk: at91: clk-main: update key before writing AT91_CKGR_MOR
clk: at91: remove the checking of parent_name
clk: clk-prima2: fix return value check in prima2_clk_init()
clk: mmp2: Fix the display clock divider base
clk: pxa: Constify static struct clk_ops
clk: baikal-t1: Mark Ethernet PLL as critical
clk: qoriq: modify MAX_PLL_DIV to 32
clk: axi-clkgen: Set power bits for fractional mode
clk: axi-clkgen: Add support for fractional dividers
...
Linus Torvalds [Thu, 22 Oct 2020 19:51:32 +0000 (12:51 -0700)]
Merge tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This release cycle's updates are mostly cleanup and some minor fixes"
* tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support
dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support
pwm: Allow store 64-bit duty cycle from sysfs interface
pwm: img: Fix null pointer access in probe
pwm: pca9685: Disable unused alternative addresses
pwm: pca9685: Use BIT() macro instead of shift
pwm: pca9685: Make comments more consistent
pwm: sun4i: Simplify with dev_err_probe()
pwm: sprd: Simplify with dev_err_probe()
pwm: sifive: Simplify with dev_err_probe()
pwm: rockchip: Simplify with dev_err_probe()
pwm: jz4740: Simplify with dev_err_probe()
pwm: bcm2835: Simplify with dev_err_probe()
pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro
pwm: rockchip: Keep enabled PWMs running while probing
dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support
Linus Torvalds [Thu, 22 Oct 2020 19:41:00 +0000 (12:41 -0700)]
Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
Neal Cardwell [Thu, 22 Oct 2020 14:33:31 +0000 (10:33 -0400)]
tcp: fix to update snd_wl1 in bulk receiver fast path
In the header prediction fast path for a bulk data receiver, if no
data is newly acknowledged then we do not call tcp_ack() and do not
call tcp_ack_update_window(). This means that a bulk receiver that
receives large amounts of data can have the incoming sequence numbers
wrap, so that the check in tcp_may_update_window fails:
after(ack_seq, tp->snd_wl1)
If the incoming receive windows are zero in this state, and then the
connection that was a bulk data receiver later wants to send data,
that connection can find itself persistently rejecting the window
updates in incoming ACKs. This means the connection can persistently
fail to discover that the receive window has opened, which in turn
means that the connection is unable to send anything, and the
connection's sending process can get permanently "stuck".
The fix is to update snd_wl1 in the header prediction fast path for a
bulk data receiver, so that it keeps up and does not see wrapping
problems.
This fix is based on a very nice and thorough analysis and diagnosis
by Apollon Oikonomopoulos (see link below).
This is a stable candidate but there is no Fixes tag here since the
bug predates current git history. Just for fun: looks like the bug
dates back to when header prediction was added in Linux v2.1.8 in Nov
1996. In that version tcp_rcv_established() was added, and the code
only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to
apply cleanly at least as far back as v3.2.
Ke Li [Thu, 22 Oct 2020 06:41:46 +0000 (02:41 -0400)]
net: Properly typecast int values to set sk_max_pacing_rate
In setsockopt(SO_MAX_PACING_RATE) on 64bit systems, sk_max_pacing_rate,
after extended from 'u32' to 'unsigned long', takes unintentionally
hiked value whenever assigned from an 'int' value with MSB=1, due to
binary sign extension in promoting s32 to u64, e.g. 0x80000000 becomes
0xFFFFFFFF80000000.
Thus inflated sk_max_pacing_rate causes subsequent getsockopt to return
~0U unexpectedly. It may also result in increased pacing rate.
Fix by explicitly casting the 'int' value to 'unsigned int' before
assigning it to sk_max_pacing_rate, for zero extension to happen.
Fixes: 76a9ebe811fb ("net: extend sk_pacing_rate to unsigned long") Signed-off-by: Ji Li <jli@akamai.com> Signed-off-by: Ke Li <keli@akamai.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201022064146.79873-1-keli@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vineet Gupta [Thu, 22 Oct 2020 10:16:22 +0000 (03:16 -0700)]
ARC: perf: redo the pct irq missing in device-tree handling
commit feb92d7d3813456c11dce21 "(ARC: perf: don't bail setup if pct irq
missing in device-tree)" introduced a silly brown-paper bag bug:
The assignment and comparison in an if statement were not bracketed
correctly leaving the order of evaluation undefined.
Linus Torvalds [Thu, 22 Oct 2020 17:31:08 +0000 (10:31 -0700)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The siginificant new ext4 feature this time around is Harshad's new
fast_commit mode.
In addition, thanks to Mauricio for fixing a race where mmap'ed pages
that are being changed in parallel with a data=journal transaction
commit could result in bad checksums in the failure that could cause
journal replays to fail.
Also notable is Ritesh's buffered write optimization which can result
in significant improvements on parallel write workloads. (The kernel
test robot reported a 330.6% improvement on fio.write_iops on a 96
core system using DAX)
Besides that, we have the usual miscellaneous cleanups and bug fixes"
Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
ext4: fix invalid inode checksum
ext4: add fast commit stats in procfs
ext4: add a mount opt to forcefully turn fast commits on
ext4: fast commit recovery path
jbd2: fast commit recovery path
ext4: main fast-commit commit path
jbd2: add fast commit machinery
ext4 / jbd2: add fast commit initialization
ext4: add fast_commit feature and handling for extended mount options
doc: update ext4 and journalling docs to include fast commit feature
ext4: Detect already used quota file early
jbd2: avoid transaction reuse after reformatting
ext4: use the normal helper to get the actual inode
ext4: fix bs < ps issue reported with dioread_nolock mount opt
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()
ext4: data=journal: fixes for ext4_page_mkwrite()
jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers()
jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers()
ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable()
ext4: use ext4_sb_bread() instead of sb_bread()
...
Steve French [Thu, 22 Oct 2020 04:54:19 +0000 (23:54 -0500)]
SMB3: add support for recognizing WSL reparse tags
The IO_REPARSE_TAG_LX_ tags originally were used by WSL but they
are preferred by the Linux client in some cases since, unlike
the NFS reparse tag (or EAs), they don't require an extra query
to determine which type of special file they represent.
Add support for readdir to recognize special file types of
FIFO, SOCKET, CHAR, BLOCK and SYMLINK. This can be tested
by creating these special files in WSL Linux and then
sharing that location on the Windows server and mounting
to the Windows server to access them.
Prior to this patch all of the special files would show up
as being of type 'file' but with this patch they can be seen
with the correct file type as can be seen below:
brwxr-xr-x 1 root root 0, 0 Oct 21 17:10 block
crwxr-xr-x 1 root root 0, 0 Oct 21 17:46 char
drwxr-xr-x 2 root root 0 Oct 21 18:27 dir
prwxr-xr-x 1 root root 0 Oct 21 16:21 fifo
-rwxr-xr-x 1 root root 0 Oct 21 15:48 file
lrwxr-xr-x 1 root root 0 Oct 21 15:52 symlink-to-file
TODO: go through all documented reparse tags to see if we can
reasonably map some of them to directories vs. files vs. symlinks
and also add support for device numbers for block and char
devices.
Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Dan Carpenter [Wed, 16 Sep 2020 20:18:21 +0000 (23:18 +0300)]
cifs: remove bogus debug code
The "end" pointer is either NULL or it points to the next byte to parse.
If there isn't a next byte then dereferencing "end" is an off-by-one out
of bounds error. And, of course, if it's NULL that leads to an Oops.
Printing "*end" doesn't seem very useful so let's delete this code.
Also for the last debug statement, I noticed that it should be printing
"sequence_end" instead of "end" so fix that as well.
Reported-by: Dominik Maier <dmaier@sect.tu-berlin.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Ronnie Sahlberg [Wed, 21 Oct 2020 02:10:44 +0000 (12:10 +1000)]
cifs: move smb version mount options into fs_context.c
This and related patches which move mount related
code to fs_context.c has the advantage of
shriking the code in fs/cifs/connect.c (which had
the second most lines of code of any of the files
in cifs.ko and was getting harder to read due
to its size) and will also make it easier to
switch over to the new mount API in the future.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Ronnie Sahlberg [Wed, 21 Oct 2020 01:30:35 +0000 (11:30 +1000)]
cifs: move cache mount options to fs_context.ch
Helps to shrink connect.c and make it more readable
by moving mount related code to fs_context.c and
fs_context.h
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Ronnie Sahlberg [Wed, 21 Oct 2020 00:37:11 +0000 (10:37 +1000)]
cifs: move security mount options into fs_context.ch
This patch moves the parsing of security mount options into
fs_context.ch. There are no changes to any logic.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Ronnie Sahlberg [Wed, 21 Oct 2020 00:22:33 +0000 (10:22 +1000)]
cifs: add files to host new mount api
This will make it easier in the future, but also will allow us to
shrink connect.c which is getting too big, and harder to read
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Linus Torvalds [Thu, 22 Oct 2020 16:59:21 +0000 (09:59 -0700)]
Merge branch 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
Linus Torvalds [Thu, 22 Oct 2020 16:44:27 +0000 (09:44 -0700)]
Merge tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"The one new feature this time, from Anna Schumaker, is READ_PLUS,
which has the same arguments as READ but allows the server to return
an array of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes"
* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
sunrpc: raise kernel RPC channel buffer size
svcrdma: fix bounce buffers for unaligned offsets and multiple pages
nfsd: remove unneeded break
net/sunrpc: Fix return value for sysctl sunrpc.transports
NFSD: Encode a full READ_PLUS reply
NFSD: Return both a hole and a data segment
NFSD: Add READ_PLUS hole segment encoding
NFSD: Add READ_PLUS data support
NFSD: Hoist status code encoding into XDR encoder functions
NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
NFSD: Remove the RETURN_STATUS() macro
NFSD: Call NFSv2 encoders on error returns
NFSD: Fix .pc_release method for NFSv2
NFSD: Remove vestigial typedefs
NFSD: Refactor nfsd_dispatch() error paths
NFSD: Clean up nfsd_dispatch() variables
NFSD: Clean up stale comments in nfsd_dispatch()
NFSD: Clean up switch statement in nfsd_dispatch()
...
Linus Torvalds [Thu, 22 Oct 2020 16:39:29 +0000 (09:39 -0700)]
Merge tag 'exfat-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Replace memcpy with structure assignment
- Remove unneeded codes and use helper function i_blocksize()
- Fix typos found by codespell
* tag 'exfat-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: remove useless check in exfat_move_file()
exfat: remove 'rwoffset' in exfat_inode_info
exfat: replace memcpy with structure assignment
exfat: remove useless directory scan in exfat_add_entry()
exfat: eliminate dead code in exfat_find()
exfat: use i_blocksize() to get blocksize
exfat: fix misspellings using codespell tool
Linus Torvalds [Thu, 22 Oct 2020 16:33:20 +0000 (09:33 -0700)]
Merge tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"A couple of small fixes (loff_t overflow on 32bit, syzbot
uninitialized variable warning) and code cleanup (xen)"
* tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux:
net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid
9p/xen: Fix format argument warning
9P: Cast to loff_t before multiplying
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
Similar to 7980d2eabde8 ("ipvs: clear skb->tstamp in forwarding path").
fq qdisc requires tstamp to be cleared in forwarding path.
Fixes: 8203e2d844d3 ("net: clear skb->tstamp in forwarding paths") Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Lijun Pan [Tue, 20 Oct 2020 22:39:19 +0000 (17:39 -0500)]
ibmvnic: save changed mac address to adapter->mac_addr
After mac address change request completes successfully, the new mac
address need to be saved to adapter->mac_addr as well as
netdev->dev_addr. Otherwise, adapter->mac_addr still holds old
data.
Matthieu Baerts [Wed, 21 Oct 2020 15:55:49 +0000 (17:55 +0200)]
selftests: mptcp: depends on built-in IPv6
Recently, CONFIG_MPTCP_IPV6 no longer selects CONFIG_IPV6. As a
consequence, if CONFIG_MPTCP_IPV6=y is added to the kconfig, it will no
longer ensure CONFIG_IPV6=y. If it is not enabled, CONFIG_MPTCP_IPV6
will stay disabled and selftests will fail.
We also need CONFIG_IPV6 to be built-in. For more details, please see
commit 0ed37ac586c0 ("mptcp: depends on IPV6 but not as a module").
Note that 'make kselftest-merge' will take all 'config' files found in
'tools/testsing/selftests'. Because some of them already set
CONFIG_IPV6=y, MPTCP selftests were still passing. But they will fail if
MPTCP selftests are launched manually after having executed this command
to prepare the kernel config:
The reason is that virtnet_set_features now calls virtnet_set_guest_offloads
unconditionally, it used to only call it when there is something
to configure.
If device does not have a control vq, everything breaks.
Revert the original commit for now.
Cc: Tonghao Zhang <xiangxia.m.yue@gmail.com> Fixes: 3618ad2a7c0e7 ("virtio-net: ethtool configurable RXCSUM") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20201021142944.13615-1-mst@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luo Meng [Tue, 20 Oct 2020 01:36:31 +0000 (09:36 +0800)]
ext4: fix invalid inode checksum
During the stability test, there are some errors:
ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid.
If the inode->i_iblocks too big and doesn't set huge file flag, checksum
will not be recalculated when update the inode information to it's buffer.
If other inode marks the buffer dirty, then the inconsistent inode will
be flushed to disk.
This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
This patch adds main fast commit commit path handlers. The overall
patch can be divided into two inter-related parts:
(A) Metadata updates tracking
This part consists of helper functions to track changes that need
to be committed during a commit operation. These updates are
maintained by Ext4 in different in-memory queues. Following are
the APIs and their short description that are implemented in this
patch:
- ext4_fc_track_link/unlink/creat() - Track unlink. link and creat
operations
- ext4_fc_track_range() - Track changed logical block offsets
inodes
- ext4_fc_track_inode() - Track inodes
- ext4_fc_mark_ineligible() - Mark file system fast commit
ineligible()
- ext4_fc_start_update() / ext4_fc_stop_update() /
ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These
functions are useful for co-ordinating inode updates with
commits.
(B) Main commit Path
This part consists of functions to convert updates tracked in
in-memory data structures into on-disk commits. Function
ext4_fc_commit() is the main entry point to commit path.
This patch adds fast commit area trackers in the journal_t
structure. These are initialized via the jbd2_fc_init() routine that
this patch adds. This patch also adds ext4/fast_commit.c and
ext4/fast_commit.h files for fast commit code that will be added in
subsequent patches in this series.
ext4: add fast_commit feature and handling for extended mount options
We are running out of mount option bits. Add handling for using
s_mount_opt2. Add ext4 and jbd2 fast commit feature flag and also add
ability to turn off the fast commit feature in Ext4.
Jay Cornwall [Sat, 17 Oct 2020 13:38:43 +0000 (08:38 -0500)]
drm/amdkfd: Use same SQ prefetch setting as amdgpu
0 causes instruction fetch stall at cache line boundary under some
conditions on Navi10. A non-zero prefetch is the preferred default
in any case.
Fixes soft hang in Luxmark.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Di Zhu [Wed, 21 Oct 2020 02:00:53 +0000 (10:00 +0800)]
rtnetlink: fix data overflow in rtnl_calcit()
"ip addr show" command execute error when we have a physical
network card with a large number of VFs
The return value of if_nlmsg_size() in rtnl_calcit() will exceed
range of u16 data type when any network cards has a larger number of
VFs. rtnl_vfinfo_size() will significant increase needed dump size when
the value of num_vfs is larger.
Eventually we get a wrong value of min_ifinfo_dump_size because of overflow
which decides the memory size needed by netlink dump and netlink_dump()
will return -EMSGSIZE because of not enough memory was allocated.
So fix it by promoting min_dump_alloc data type to u32 to
avoid whole netlink message size overflow and it's also align
with the data type of struct netlink_callback{}.min_dump_alloc
which is assigned by return value of rtnl_calcit()
Xie He [Tue, 20 Oct 2020 06:34:20 +0000 (23:34 -0700)]
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
This driver calls ether_setup to set up the network device.
The ether_setup function would add the IFF_TX_SKB_SHARING flag to the
device. This flag indicates that it is safe to transmit shared skbs to
the device.
However, this is not true. This driver may pad the frame (in eth_tx)
before transmission, so the skb may be modified.
Fixes: 550fd08c2ceb ("net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared") Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201020063420.187497-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xie He [Tue, 20 Oct 2020 01:31:52 +0000 (18:31 -0700)]
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
The hdlc_rcv function is used as hdlc_packet_type.func to process any
skb received in the kernel with skb->protocol == htons(ETH_P_HDLC).
The purpose of this function is to provide second-stage processing for
skbs not assigned a "real" L3 skb->protocol value in the first stage.
This function assumes the device from which the skb is received is an
HDLC device (a device created by this module). It assumes that
netdev_priv(dev) returns a pointer to "struct hdlc_device".
However, it is possible that some driver in the kernel (not necessarily
in our control) submits a received skb with skb->protocol ==
htons(ETH_P_HDLC), from a non-HDLC device. In this case, the skb would
still be received by hdlc_rcv. This will cause problems.
hdlc_rcv should be able to recognize and drop invalid skbs. It should
first make sure "dev" is actually an HDLC device, before starting its
processing. This patch adds this check to hdlc_rcv.
Daniel Borkmann [Wed, 21 Oct 2020 20:32:57 +0000 (22:32 +0200)]
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
Yaniv reported a compilation error after pulling latest libbpf:
[...]
../libbpf/src/root/usr/include/bpf/bpf_helpers.h:99:10: error:
unknown register name 'r0' in asm
: "r0", "r1", "r2", "r3", "r4", "r5");
[...]
The issue got triggered given Yaniv was compiling tracing programs with native
target (e.g. x86) instead of BPF target, hence no BTF generated vmlinux.h nor
CO-RE used, and later llc with -march=bpf was invoked to compile from LLVM IR
to BPF object file. Given that clang was expecting x86 inline asm and not BPF
one the error complained that these regs don't exist on the former.
Guard bpf_tail_call_static() with defined(__bpf__) where BPF inline asm is valid
to use. BPF tracing programs on more modern kernels use BPF target anyway and
thus the bpf_tail_call_static() function will be available for them. BPF inline
asm is supported since clang 7 (clang <= 6 otherwise throws same above error),
and __bpf_unreachable() since clang 8, therefore include the latter condition
in order to prevent compilation errors for older clang versions. Given even an
old Ubuntu 18.04 LTS has official LLVM packages all the way up to llvm-10, I did
not bother to special case the __bpf_unreachable() inside bpf_tail_call_static()
further.
Also, undo the sockex3_kern's use of bpf_tail_call_static() sample given they
still have the old hacky way to even compile networking progs with native instead
of BPF target so bpf_tail_call_static() won't be defined there anymore.
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
This updates the test_tc_neigh prog in selftests to use the new syntax of
bpf_redirect_neigh(). To exercise the helper both with and without the
optional parameter, add an additional test_tc_neigh_fib test program, which
does a bpf_fib_lookup() followed by a call to bpf_redirect_neigh() instead
of looking up the ifindex in a map.
Update the test_tc_redirect.sh script to run both versions of the test,
and while we're add it, fix it to work on systems that have a consolidated
dual-stack 'ping' binary instead of separate ping/ping6 versions.
In exfat_move_file(), the identity of source and target directory has been
checked by the caller.
Also, it gets stream.start_clu from file dir-entry, which is an invalid
determination.
Remove 'rwoffset' in exfat_inode_info and replace it with the parameter of
exfat_readdir().
Since rwoffset is referenced only by exfat_readdir(), it is not necessary
a exfat_inode_info's member.
Also, change cpos to point to the next of entry-set, and return the index
of dir-entry via dir_entry->entry.
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
Based on the discussion in [0], update the bpf_redirect_neigh() helper to
accept an optional parameter specifying the nexthop information. This makes
it possible to combine bpf_fib_lookup() and bpf_redirect_neigh() without
incurring a duplicate FIB lookup - since the FIB lookup helper will return
the nexthop information even if no neighbour is present, this can simply
be passed on to bpf_redirect_neigh() if bpf_fib_lookup() returns
BPF_FIB_LKUP_RET_NO_NEIGH. Thus fix & extend it before helper API is frozen.
Steve French [Wed, 21 Oct 2020 05:15:42 +0000 (00:15 -0500)]
smb3: do not try to cache root directory if dir leases not supported
To servers which do not support directory leases (e.g. Samba)
it is wasteful to try to open_shroot (ie attempt to cache the
root directory handle). Skip attempt to open_shroot when
server does not indicate support for directory leases.
Cuts the number of requests on mount from 17 to 15, and
cuts the number of requests on stat of the root directory
from 4 to 3.
Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> # v5.1+
Steve French [Wed, 21 Oct 2020 18:12:08 +0000 (13:12 -0500)]
smb3: fix stat when special device file and mounted with modefromsid
When mounting with modefromsid mount option, it was possible to
get the error on stat of a fifo or char or block device:
"cannot stat <filename>: Operation not supported"
Special devices can be stored as reparse points by some servers
(e.g. Windows NFS server and when using the SMB3.1.1 POSIX
Extensions) but when the modefromsid mount option is used
the client attempts to get the ACL for the file which requires
opening with OPEN_REPARSE_POINT create option.
Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Samuel Cabrero [Fri, 16 Oct 2020 09:54:55 +0000 (11:54 +0200)]
cifs: Print the address and port we are connecting to in generic_ip_connect()
Can be helpful in debugging mount and reconnect issues
Signed-off-by: Samuel Cabrero <scabrero@suse.de> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3: Resolve data corruption of TCP server info fields
TCP server info field server->total_read is modified in parallel by
demultiplex thread and decrypt offload worker thread. server->total_read
is used in calculation to discard the remaining data of PDU which is
not read into memory.
Because of parallel modification, server->total_read can get corrupted
and can result in discarding the valid data of next PDU.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> #5.4+ Signed-off-by: Steve French <stfrench@microsoft.com>
In order to avoid creating executable hugepages in the TDP MMU PF
handler, remove the dependency between disallowed_hugepage_adjust and
the shadow_walk_iterator. This will open the function up to being used
by the TDP MMU PF handler in a future patch.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-10-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:47 +0000 (11:26 -0700)]
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
Add functions to zap SPTEs to the TDP MMU. These are needed to tear down
TDP MMU roots properly and implement other MMU functions which require
tearing down mappings. Future patches will add functions to populate the
page tables, but as for this patch there will not be any work for these
functions to do.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-8-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu [Wed, 14 Oct 2020 18:26:46 +0000 (11:26 -0700)]
KVM: Cache as_id in kvm_memory_slot
Cache the address space ID just like the slot ID. It will be used in
order to fill in the dirty ring entries.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201014182700.2888246-7-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:45 +0000 (20:26 +0200)]
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
The existing bookkeeping done by KVM when a PTE is changed is spread
around several functions. This makes it difficult to remember all the
stats, bitmaps, and other subsystems that need to be updated whenever a
PTE is modified. When a non-leaf PTE is marked non-present or becomes a
leaf PTE, page table memory must also be freed. To simplify the MMU and
facilitate the use of atomic operations on SPTEs in future patches, create
functions to handle some of the bookkeeping required as a result of
a change.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:44 +0000 (20:26 +0200)]
kvm: x86/mmu: Allocate and free TDP MMU roots
The TDP MMU must be able to allocate paging structure root pages and track
the usage of those pages. Implement a similar, but separate system for root
page allocation to that of the x86 shadow paging implementation. When
future patches add synchronization model changes to allow for parallel
page faults, these pages will need to be handled differently from the
x86 shadow paging based MMU's root pages.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:43 +0000 (11:26 -0700)]
kvm: x86/mmu: Init / Uninit the TDP MMU
The TDP MMU offers an alternative mode of operation to the x86 shadow
paging based MMU, optimized for running an L1 guest with TDP. The TDP MMU
will require new fields that need to be initialized and torn down. Add
hooks into the existing KVM MMU initialization process to do that
initialization / cleanup. Currently the initialization and cleanup
fucntions do not do very much, however more operations will be added in
future patches.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-4-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 14 Oct 2020 18:26:42 +0000 (20:26 +0200)]
kvm: x86/mmu: Introduce tdp_iter
The TDP iterator implements a pre-order traversal of a TDP paging
structure. This iterator will be used in future patches to create
an efficient implementation of the KVM MMU for the TDP case.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 28 Sep 2020 14:17:17 +0000 (10:17 -0400)]
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
The TDP MMU's own function for the changed-PTE notifier will need to be
update a PTE in the exact same way as the shadow MMU. Rather than
re-implementing this logic, factor the SPTE creation out of kvm_set_pte_rmapp.
Extracted out of a patch by Ben Gardon. <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / mirror_ubuntu-kernels.git / log