Gb camera need to communicate with HOST driver.
as temporary solution there will be shared header
between gb camera HOST camera.
Both need to be in sync since gb drivers are compiled
out of the kernel tree.
Gb camera register camera operation functions when is created.
Currently unregister is not supported.
Rui Miguel Silva [Tue, 12 Jan 2016 14:35:49 +0000 (14:35 +0000)]
greybus: lights: remove sync operation and work queue
In kernel v4.5 there is a change in LED api, which remove the need for
individual work queue and rename the set_sync operation to set_blocking.
This patch add the handling of this case and avoid compilation failure
for this kernel versions.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rui Miguel Silva [Tue, 12 Jan 2016 14:35:48 +0000 (14:35 +0000)]
greybus: kernel_ver: add handle for lights in 4.5
In v4.5 the LED API is changed related to the set brightness
operations, set_sync is removed and the workqueue handling is now done
by leds core, so no need for individual drivers to have one.
This will be done by removing the SET_SYNC macro and add a new
SET_BLOCKING.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This adds the GREYBUS_ID environment variable to all interface uevents
to let userspace know the vendor/product id of the module interface that
has been added or removed from the system.
greybus: APBridge: move APBridge request protocol to a common .h file
This moves all of the APBridge request protocol commands that are
currently used to a common .h file for everyone to be able to use them
in the future, where needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Tested-by: Mark Greer <mgreer@animalcreek.com> Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
greybus: host: provide "generic" apbridge output calls
Provide a new function, gb_hd_output() to send data to the apbridge.
This is useful for the camera and audio drivers that need to do this
type of messaging.
The camera driver is converted to use this new function, the audio
driver can use it when it gets merged later.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Tested-by: Mark Greer <mgreer@animalcreek.com> Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
greybus: power_supply: fix use after free of power supply
Individual power supply were being freed and checked using the wrong
pointers and at the wrong place, which would make several issues, like
used after free and so on.
Fix it by freeing all allocated memory after release individual power
supply.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reported-by: Johan Hovold <johan@hovoldconsulting.com> Reviewed-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
greybus: power_supply: fix unregister on error path
If setup fail the release for each supply needs to know the status at
unregister time. So, add the field to the structure, update it at setup
time and use it at release.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reported-by: Johan Hovold <johan@hovoldconsulting.com> Reviewed-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Vaibhav Hiremath [Mon, 11 Jan 2016 12:11:24 +0000 (17:41 +0530)]
greybus: arche-platform: Add wake/detect support along with handshaking with AP
Add wake_detect support to arche-platform driver which is responsible
for SVC control. This patch also adds code for handshaking between
AP <=> SVC. The sequence is,
1. AP boots
To keep compatibility between DB3 and EVT platform, SVC will be
help in reset and AP driver would release it at appropriate time.
wake/detect pin (WD8A) = Low
reset (SVC/APB1/APB2) = Asserted (as per polarity)
2. AP Driver gets inserted
2.1. AP will deassert reset to SVC (following power on sequence)
2.2. SVC allows 360 milliseconds to elapse after switch boots to work
around bug described in ENG-330.
2.3. AP asserts wake/detect pin (WD8A = HIGH)
3. SVC detects assertion of wake/detect pin, and sends "wake out" signal to AP
4. AP receives "wake out" signal, takes AP Bridges through their power
on reset sequence as defined in the bridge ASIC reference manuals
5. AP takes USB3613 through its power on reset sequence
6. AP should enumerates AP Bridges
Note: ISR has been deliberately removed (not merged) as we are still
not sure how it will be used, in runtime usage context. Driver as such
doesn't do anything for runtime assert-n-deassert of reset to SVC/APB's,
it just simply offloads it to user by exporting required gpio's.
The exported gpio's are required for FW flashing from user space.
When it comes to usersace manipulated control sequence, user has to manage.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Tested-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Vaibhav Hiremath [Mon, 11 Jan 2016 12:11:23 +0000 (17:41 +0530)]
greybus: arche-apb-ctrl: deassert reset at the end of probe
Now the complete handshaking between AP<=>SVC would be
offloaded to parent driver (arche-platform) who is
responsible for SVC control, so the apb-ctrl driver can
just simply bring APB's out of reset during probe itself.
Along with deasserting reset, this patch renames the local fn
to exclusively use it for reset purpose.
Note that, driver is exporting reset gpio to
user, so user can still flash FW from prompt.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Tested-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Vaibhav Hiremath [Mon, 11 Jan 2016 12:11:22 +0000 (17:41 +0530)]
greybus: arche-apb-ctrl: Remove wake_detect gpio and related code
With TIME_SYNC functionality, assignment of wake/detect pin
will change,
WD_8A => to bring APB's out of reset
WD_8B => TIME_SYNC operation
So in order to support this, we can no longer keep wake_detect
gpio in apb-ctrl driver. So remove it.
In the subsequent patches, wake_detect support will be added
to parent SVC driver (arche-platform) who is responsible for SVC control.
Note that, this patch also removes ISR related code.
The APB state still is maintained, for future use.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Tested-by: Michael Scott <michael.scott@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Mon, 11 Jan 2016 05:59:15 +0000 (11:29 +0530)]
greybus: arche-apb: Do cleanup within apb_ctrl_init_seq() for error cases
Relying on apb_ctrl_cleanup() to do the cleanup for errors that occurred
within apb_ctrl_init_seq() isn't a very clean idea. Handle that
separately within apb_ctrl_init_seq().
This will clean apb_ctrl_cleanup() in later patches.
Viresh Kumar [Mon, 11 Jan 2016 05:59:13 +0000 (11:29 +0530)]
greybus: arche-apb: Properly use dev_err/info/warn
Use dev_err for errors after which we need to abort the currently
running routine and dev_warn for resource allocation failure, with which
we can continue to work.
Viresh Kumar [Mon, 11 Jan 2016 05:59:12 +0000 (11:29 +0530)]
greybus: arche-apb: NULL is a valid regulator
Since NULL could in theory be a valid regulator we ought to check for
IS_ERR() rather than for NULL. In practice this is unlikely to be an
issue but it's better for neatness.
Viresh Kumar [Mon, 11 Jan 2016 05:59:05 +0000 (11:29 +0530)]
greybus: arche-platform: Put APB in reset if of_platform_populate() fails
The current implementation around of_platform_populate() is not so
great. On error, we first print an error message, followed by a success
message and finally we return an error.
And over that we don't undo what we did initially.
This patch puts the APB back into reset and create a separate error
path to make things clear.
Viresh Kumar [Mon, 11 Jan 2016 05:59:04 +0000 (11:29 +0530)]
greybus: arche-platform: Export GPIOs after populating APBs
Populating APBs operation can potentially fail and it would be better if
we export the GPIOs towards then end of the routine, so that we don't
need to unexport them on error cases.
Eli Sennesh [Fri, 8 Jan 2016 19:11:29 +0000 (14:11 -0500)]
greybus: firmware/bootrom: debug output from bootrom protocol
The bootrom protocol issues no dynamic debugging messages when it functions
successfully. Use dev_dbg() to fix that by issuing kernel logs when firmware
download works.
Signed-off-by: Eli Sennesh <esennesh@leaflabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Jacopo Mondi [Fri, 8 Jan 2016 16:13:20 +0000 (18:13 +0200)]
greybus: camera: Add support for flags to stream_configure
Add support for the flags field of the stream configure request that was
recently added to the camera protocol and update the debugfs arguments
parsing accordingly. The stream configure response layout is also
updated to the latest protocol specification.
greybus: svc: Replace link config hack with standard operation
The link config operation was a hack only designed to fulfill the camera
driver's needs. Now that a standard operation is defined for the same
purpose, implement it and remove the hack.
greybus: arche-apb-ctrl: Do not bring APB out of reset in probe
With addition of handshaking between AP <=> SVC, driver
brings out APB out of reset only on reception of WAKE_MOD
signal from SVC. So remove the deassertion from probe.
greybus: arche-apb-ctrl: Set wake_detect gpio to low initially
This patch enables handshaking of AP and SVC using wake_detect
gpio (WD_8A and WD_8B).
Note that WAKE_DETECT polarity is active-high, so in order to
enable handshaking between AP <=> SVC, we need to set wake_detect
gpio to low initially, so that driver can send WAKE_DET signal
(active-high) to SVC and then SVC can send back WAKE_MOD signal
(active-low).
And on reception of WAKE_MOD signal, driver would bring respective
APB out of reset.
Vaibhav Hiremath [Mon, 28 Dec 2015 14:36:32 +0000 (20:06 +0530)]
greybus: arche_platform: Remove child's platform device as part of _remove() fn
It seems we need to delete platform_dev of all childs explicitly,
in _remove() fn callback of parent driver.
There were some discussions about having of_platform_unpopulate(),
but it never made it to mainline.
https://lkml.org/lkml/2013/7/19/615
There are some drivers which are removing platform_dev explicitly,
as done in this patch.
Note that, without this, multiple insmod-rmmod won't work, as I see
driver probe gets invoked twice and leads to failure of probe.
Johan Hovold [Wed, 30 Dec 2015 10:23:51 +0000 (11:23 +0100)]
greybus: camera: destroy data connection on link-config errors
Make sure to tear down the data connection also on failure to configure
the link by setting the data_connected flag immediately after creating
the connection.
Viresh Kumar [Mon, 28 Dec 2015 06:29:01 +0000 (11:59 +0530)]
greybus: interface: Fetch and expose version of interface's firmware
The version of the currently running firmware on the module is useful
for userspace as it can be used to find if an update is available or
not. This patch fetches interface's version with a new control operation
and exposes the same in userspace.
Viresh Kumar [Mon, 28 Dec 2015 06:29:00 +0000 (11:59 +0530)]
greybus: interface: Receive serial-number on hotplug event
Two exactly same modules can be uniquely identified using module's
serial-number. This patch updates the interface hotplug event to also
receive the serial-number of the module.
Viresh Kumar [Wed, 23 Dec 2015 03:37:42 +0000 (09:07 +0530)]
greybus: svc: Set interface's hotplug attributes before using them
gb_svc_read_and_clear_module_boot_status() relies on the values of
ddbl1_manufacturer_id and ddbl1_product_id to distinguish between ES2
and ES3 chips, but those values are set for the interface structure only
after gb_svc_read_and_clear_module_boot_status() is called.
This makes ES2 module to fail with following errors:
greybus 1-2: Module not ready yet
greybus 1-svc: failed to clear boot status of interface 2: -19
Fix this by setting these values before calling
gb_svc_read_and_clear_module_boot_status().
Fixes: 51f1dc421b1f ("firmware and svc: detect the difference between ES2 and ES3 chips") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Bryan O'Donoghue [Wed, 23 Dec 2015 16:48:59 +0000 (16:48 +0000)]
greybus: svc: Change GB_SVC_TYPE_LINK_CONFIG to 0x10
The greybus specification reserves SVC type 0x0d-0x0f for timesync. 53124d73 ('svc: Add support for the link config operation') allocated the
next available type 0x0d which conflicts with the specification. Change the
type to 0x10 to ensure kernel and specification agree.
Vaibhav Hiremath [Wed, 16 Dec 2015 10:59:20 +0000 (16:29 +0530)]
greybus: arche-apb-ctrl: Assert reset to APB at the end of probe
Until we have proper handshake mechanism implemented with SVC
assert reset to APB at the end of probe.
We are safe here to do that, as SVC always enables clock to APB's
currently.
And also from EVT1 perspective, we should be good, as clock control
signals are now moved to AP.
Vaibhav Hiremath [Wed, 16 Dec 2015 10:59:19 +0000 (16:29 +0530)]
greybus: arche-apb-ctrl: Add APB control driver
It was messy to integrate both SVC, APB (and any other arche
platform specific control) into one single driver. Especially
due to cross-dependency.
AP first needs to bringup SVC, as SVC should enable clock to APB.
APB should come up before HUB, as due to some reason HUB wouldn't
enumerate APB's is APB comes up later.
And on top of that we should have clean picture of hardware description
in DT file.
So this patch introduces APB control driver. Mostly copied from original
arche-platform driver + fixed boot sequence.
Vaibhav Hiremath [Wed, 16 Dec 2015 10:59:18 +0000 (16:29 +0530)]
greybus: arche-platform: Rename db3-platform to arche-platform
With multiple platforms getting rolled into ara,
db3 name is confusing. And this driver is applicable
to all arche platforms, so make sense to rename it to
arche-platform.c. Also rename all internal functions
accordingly.
Vaibhav Hiremath [Wed, 16 Dec 2015 10:59:17 +0000 (16:29 +0530)]
greybus: db3(arche)-platform: Remove all APB control code
Current db3(arche)-platform driver was only handling APB control signals,
which is where it all started. But now with completion of DB3/EVT1 bringup
we know that platform driver is more than APB control.
We have to bring SVC up before APB, as SVC supposed to enable
clock to APB's. Note that, in EVT1, AP will have direct control over
APB's clock.
Then we have dependency between APB and USB HUB, where, APB should be
brought up before USB HUB (note that this needs to rootcaused).
This patch cleanup the db3(arche)-platform driver to remove all APB control
code. The idea here is create another driver for APB control
(arche-apb-ctrl.c), which will deal with APB.
And this driver will have generic/common platform specific support,
currently manages SVC resources.
This patch also takes in all the changes from factory branch, discovered
during bringup.
Eli Sennesh [Tue, 22 Dec 2015 22:26:57 +0000 (17:26 -0500)]
greybus: firmware and svc: detect the difference between ES2 and ES3 chips
The Greybus SVC code needs to read and clear the module boot status upon
hotplug; this requires reading two different attributes depending on whether
we're running on ES2 or ES3. On Marti Bolivar's (mbolivar@leaflabs.com)
advice, we detect ES2 using the unique ES2_DDBL1_MFR_ID and ES2_DDBL1_PROD_ID
for ES2 hardware, and treat all other chips as ES3 appropriately. This patch
detects the difference and adds the appropriate definitions for ES3 hardware.
Signed-off-by: Eli Sennesh <esennesh@leaflabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Tue, 22 Dec 2015 16:34:34 +0000 (22:04 +0530)]
greybus: interface: Expose DDBL1 manufacturing and production id in sysfs
These ids are already fetched from the SVC, but were never exposed to
sysfs. Userspace may be interested in using these values and hence these
must be exposed to it.
Viresh Kumar [Tue, 22 Dec 2015 16:34:33 +0000 (22:04 +0530)]
greybus: interface: Prefix DDBL1 attributes with ddbl1_ instead of unipro_
The Device descriptor block Level 1 (DDBL1) attributes are specified by
the MIPI standard and prefixing them with 'unipro_' isn't the best thing
to do. They should be prefixed with DDBL1 instead.
To make it more readable/clear:
- rename macros and variable by prefixing them with ddbl1_.
- write full names for mfg and prod ids as manufacturer and product ids.
- replace mfg (manufacturing) with mfr (manufacturer)
Viresh Kumar [Fri, 18 Dec 2015 09:34:27 +0000 (15:04 +0530)]
greybus: interface: Prefix hexadecimal values with '0x'
In order to clearly specify the base of values printed using sysfs
files, prefix hexadecimal values with '0x'. Also force the minimum width
(to be printed) for hexadecimal values to their sizes.
To make it more readable make the second argument to gb_interface_attr()
a proper string.
Laurent Pinchart [Fri, 18 Dec 2015 19:23:25 +0000 (21:23 +0200)]
greybus: camera: Configure the bridge CSI transmitter
Start or stop the CSI transmitter when configuring and unconfiguring the
streams respectively. The CSI configuration parameters are currently
hardcoded.
This breaks the kernel-only build as it can't find any userspace headers
with the cross-compiler, so don't build the tools by "default" unless
you ask for them.
greybus: loopback_test: null terminate the dict structure
This lets us test for any number of entries, no need to do an
ARRAY_SIZE-type comparison. This fixes a build warning of comparing
signed/unsigned values.)
Rui Miguel Silva [Thu, 17 Dec 2015 19:56:23 +0000 (19:56 +0000)]
greybus: camera: fix data types of operations
In some operations definitions it was introduce some new fields with
the wrong data types, u8, instead of __u8. And because of this gbsim
build was broken.
Fixes: 3a1d7aa15bf6 ("greybus: Add camera protocol definition") Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Set an interface disconnected flag when the interface has been
hot-unplugged (e.g. forcibly removed or after a reboot), and use it to
disable the control connection early when deregistering the interface
and its bundles.
This avoids a one-second (default) timeout for every enabled connection
(e.g. one per bundle) at hot-unplug, something which for the default
gpbridge manifest currently amounts to five seconds.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Tue, 15 Dec 2015 14:28:56 +0000 (15:28 +0100)]
greybus: interface: clean up control-connection handling
Clean up control-connection handling by managing it through the control
structure and a higher-level control interface. Also make both the
control structure and connection lifetimes coincide with that of the
interface.
The control connection is now only enabled and disabled when the
interface is initialised and removed.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Tue, 15 Dec 2015 14:51:48 +0000 (15:51 +0100)]
greybus: es2: demote dynamic-urb error message
Demote error message when needing to dynamically allocate an URB to
debug level.
This isn't really an error as much as a reminder of how the current es2
implementation works: It uses a fixed number of pre-allocated URBs, but
allocates URBs dynamically when enough messages are sent in rapid
succession to exhaust the URB pool.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Laurent Pinchart [Tue, 15 Dec 2015 01:18:06 +0000 (03:18 +0200)]
greybus: Add driver for the camera class protocol
Integration with the V4L2 camera drivers isn't available yet, a debugfs
interface is exposed instead to call the camera Greybus operations.
The debugfs interface will be kept for module testing purpose in order
to exercise all the protocol operations with various valid and invalid
parameters.
Bryan O'Donoghue [Fri, 11 Dec 2015 13:46:53 +0000 (13:46 +0000)]
greybus: loopback: Add asynchronous backoff
A specific request from the firmware people is the ability to back-off from
sending more asynchronous operations once a specific number of operations
are in-flight.
This patch adds that ability - with a new sysfs parameter
'outstanding_operations_max' which controls the maximum number of
operations that can be outstanding/in-flight at any time.
When outstanding_operations_max contains a non-zero value and asynchronous
operations are being used - we will back-off until the completion counter
is < outstanding_operations_max. Tested in both synchronous and
asynchronous mode and with gb_loopback_connection_exit() interrupting
in-flight operations.
Suggested-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Bryan O'Donoghue [Fri, 11 Dec 2015 13:46:52 +0000 (13:46 +0000)]
greybus: loopback: Wait for all async operations to complete on exit
On gb_loopback_connection_exit() we should ensure every issued asynchronous
operation completes before exiting connection_exit(). This patch introduces
a waitqueue with a counter which represents the number of incomplete
asynchronous operations. When the counter reaches zero connection_exit()
will complete. At the point which we wait for outstanding operations to
complete the connection-specific loopback thread will have ceased to issue
new operations. Tested with both synchronous and asynchronous operations.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com> Suggested-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Bryan O'Donoghue [Fri, 11 Dec 2015 13:46:51 +0000 (13:46 +0000)]
greybus: loopback: Retrun -ENOMEM if operation allocation fails
If operation allocation fails we should return -ENOMEM in the asynchronous
operation send routine. If we don't return here then the
gb_loopback_async_operation_put() later can dereference a NULL pointer if
the previous gb_operation_create() failed.
Reported-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Bryan O'Donoghue [Fri, 11 Dec 2015 13:46:50 +0000 (13:46 +0000)]
greybus: loopback: Drop NULL check on container_of pointer
container_of cannot return NULL and the pointer passed to this context uses
reference counter bumped inside a spinlock, so the base pointer will be
valid at this point.
Suggested-by: Johan Hovold <johan@hovoldconstulting.com> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Axel Haslam [Fri, 11 Dec 2015 10:49:45 +0000 (11:49 +0100)]
greybus: loopback: register a struct device.
Instead of having the loopback attributes in the bundle device,
Add a struct device to the gb_loopback struct and register it on
connection_init, deregister it at connection_exit, and move the
loopback attribute group over to the new device.
Use device_create_with_groups to create sysfs attributes
together with device.
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Suggested-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rui Miguel Silva [Thu, 10 Dec 2015 14:24:58 +0000 (14:24 +0000)]
greybus: spi: move chipselect to one byte size
Fixed in the specification, some values for chipselect count and index
were different in size, just fix that for all reference to chipselect
and move all to one byte size and remove byte order operations.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
projects / mirror_ubuntu-zesty-kernel.git / log