]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/log
mirror_ubuntu-eoan-kernel.git
6 years agos390/qeth: move L2 xmit code to core module
Julian Wiedmann [Mon, 17 Sep 2018 15:35:55 +0000 (17:35 +0200)]
s390/qeth: move L2 xmit code to core module

We need the exact same transmit path for non-offload-eligible traffic on
L3 OSAs. So make it accessible from both sub-drivers.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoliquidio: Add the features to show FEC settings and set FEC settings
Weilin Chang [Mon, 17 Sep 2018 05:43:32 +0000 (22:43 -0700)]
liquidio: Add the features to show FEC settings and set FEC settings

1. Add functions for get_fecparam and set_fecparam.
2. Modify lio_get_link_ksettings to display FEC setting.

Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: ethernet: remove redundant null pointer check before of_node_put
zhong jiang [Sun, 16 Sep 2018 13:13:42 +0000 (21:13 +0800)]
net: ethernet: remove redundant null pointer check before of_node_put

of_node_put has taken the null pointer check into account. So it is
safe to remove the duplicated check before of_node_put.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: dsa: remove redundant null pointer check before put_device
zhong jiang [Sun, 16 Sep 2018 13:45:02 +0000 (21:45 +0800)]
net: dsa: remove redundant null pointer check before put_device

put_device has taken the null pinter check into account. So it is
safe to remove the duplicated check before put_device.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: dsa: remove redundant null pointer check before of_node_put
zhong jiang [Sun, 16 Sep 2018 13:22:31 +0000 (21:22 +0800)]
net: dsa: remove redundant null pointer check before of_node_put

of_node_put has taken the null pointer check into account. So it is
safe to remove the duplicated check before of_node_put.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: usb: remove redundant null pointer check before of_node_put
zhong jiang [Sun, 16 Sep 2018 13:20:17 +0000 (21:20 +0800)]
net: usb: remove redundant null pointer check before of_node_put

of_node_put has taken the null pointer check into account. So it is
safe to remove the duplicated check before of_node_put.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: rds: use memset to optimize the recv
Zhu Yanjun [Mon, 17 Sep 2018 02:49:30 +0000 (22:49 -0400)]
net: rds: use memset to optimize the recv

The function rds_inc_init is in recv process. To use memset can optimize
the function rds_inc_init.
The test result:

     Before:
     1) + 24.950 us   |        rds_inc_init [rds]();
     After:
     1) + 10.990 us   |        rds_inc_init [rds]();

Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoselftests/tls: Add MSG_WAITALL in recv() syscall
Vakul Garg [Sun, 16 Sep 2018 04:34:28 +0000 (10:04 +0530)]
selftests/tls: Add MSG_WAITALL in recv() syscall

A number of tls selftests rely upon recv() to return an exact number of
data bytes. When tls record crypto is done using an async accelerator,
it is possible that recv() returns lesser than expected number bytes.
This leads to failure of many test cases. To fix it, MSG_WAITALL has
been used in flags passed to recv() syscall.

Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: aquantia: memory corruption on jumbo frames
Friedemann Gerold [Sat, 15 Sep 2018 15:03:39 +0000 (18:03 +0300)]
net: aquantia: memory corruption on jumbo frames

This patch fixes skb_shared area, which will be corrupted
upon reception of 4K jumbo packets.

Originally build_skb usage purpose was to reuse page for skb to eliminate
needs of extra fragments. But that logic does not take into account that
skb_shared_info should be reserved at the end of skb data area.

In case packet data consumes all the page (4K), skb_shinfo location
overflows the page. As a consequence, __build_skb zeroed shinfo data above
the allocated page, corrupting next page.

The issue is rarely seen in real life because jumbo are normally larger
than 4K and that causes another code path to trigger.
But it 100% reproducible with simple scapy packet, like:

    sendp(IP(dst="192.168.100.3") / TCP(dport=443) \
          / Raw(RandString(size=(4096-40))), iface="enp1s0")

Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Friedemann Gerold <f.gerold@b-c-s.de>
Reported-by: Michael Rauch <michael@rauch.be>
Signed-off-by: Friedemann Gerold <f.gerold@b-c-s.de>
Tested-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'lantiq-Minor-fixes-for-vrx200-and-gswip'
David S. Miller [Mon, 17 Sep 2018 15:12:12 +0000 (08:12 -0700)]
Merge branch 'lantiq-Minor-fixes-for-vrx200-and-gswip'

Hauke Mehrtens says:

====================
net: lantiq: Minor fixes for vrx200 and gswip

These are mostly minor fixes to problems addresses in the latests round
of the review of the original series adding these driver, which were not
applied before the patches got merged into net-next.
In addition it fixes a data bus error on poweroff.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: dsa: tag_gswip: Add gswip to dsa_tag_protocol_to_str()
Hauke Mehrtens [Sat, 15 Sep 2018 12:08:49 +0000 (14:08 +0200)]
net: dsa: tag_gswip: Add gswip to dsa_tag_protocol_to_str()

The gswip tag was missing in the dsa_tag_protocol_to_str() function, add it.

Fixes: 7969119293f5 ("net: dsa: Add Lantiq / Intel GSWIP tag support")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: dsa: lantiq_gswip: Minor code style improvements
Hauke Mehrtens [Sat, 15 Sep 2018 12:08:48 +0000 (14:08 +0200)]
net: dsa: lantiq_gswip: Minor code style improvements

Use one code block when returning because the interface type is
unsupported and also check if some unsupported port gets configured.
In addition fix a double the and use dsa_is_cpu_port() instated of
manually getting the CPU port.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: lantiq: lantiq_xrx200: Move clock prepare to probe function
Hauke Mehrtens [Sat, 15 Sep 2018 12:08:47 +0000 (14:08 +0200)]
net: lantiq: lantiq_xrx200: Move clock prepare to probe function

The switch and the MAC are in one IP core and they use the same clock
signal from the clock generation unit.
Currently the clock architecture in the lantiq SoC code does not allow
to easily share the same clocks, this has to be fixed by switching to
the common clock framework.
As a workaround the clock of the switch and MAC should be activated when
the MAC gets probed and only disabled when the MAC gets removed. This
way it is ensured that the clock is always enabled when the switch or
MAC is used. The switch can not be used without the MAC.

This fixes a data bus error when rebooting the system and deactivating
the switch and mac and later accessing some registers in the cleanup
while the clocks are disabled.

Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agodt-bindings: net: dsa: lantiq, xrx200-gswip: Fix minor style fixes
Hauke Mehrtens [Sat, 15 Sep 2018 12:08:46 +0000 (14:08 +0200)]
dt-bindings: net: dsa: lantiq, xrx200-gswip: Fix minor style fixes

* Use one compatible line per line in the documentation
* Remove SoC revision depended compatible lines, we can detect that in
  the driver
* Use lower case letters in hex addresses
* Fix the size of the address ranges in the example, this now matches
  the sizes used by the SoC. The old ones will also work, this just adds
  some empty address space.
* Change the reg size of the gphy-fw node

Fixes: 86ce2bc73c7a ("dt-bindings: net: dsa: Add lantiq, xrx200-gswip DT bindings")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: devicetree@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agodt-bindings: net: lantiq, xrx200-net: Use lower case in hex
Hauke Mehrtens [Sat, 15 Sep 2018 12:08:45 +0000 (14:08 +0200)]
dt-bindings: net: lantiq, xrx200-net: Use lower case in hex

Use lower case letters in the addresses of the device tree binding.
In addition replace eth with ethernet and fix the size of the reg
element in the example. The additional range does not contain any
registers but is used for the IP block on the this SoC.

Fixes: 839790e88a3c ("dt-bindings: net: Add lantiq, xrx200-net DT bindings")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: devicetree@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: hns: make function hns_gmac_wait_fifo_clean() static
Wei Yongjun [Sat, 15 Sep 2018 01:42:09 +0000 (01:42 +0000)]
net: hns: make function hns_gmac_wait_fifo_clean() static

Fixes the following sparse warning:

drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c:322:5: warning:
 symbol 'hns_gmac_wait_fifo_clean' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: lantiq: Fix return value check in xrx200_probe()
Wei Yongjun [Sat, 15 Sep 2018 01:33:50 +0000 (01:33 +0000)]
net: lantiq: Fix return value check in xrx200_probe()

In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().

Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: dsa: gswip: Fix copy-paste error in gswip_gphy_fw_probe()
Wei Yongjun [Sat, 15 Sep 2018 01:33:38 +0000 (01:33 +0000)]
net: dsa: gswip: Fix copy-paste error in gswip_gphy_fw_probe()

The return value from of_reset_control_array_get_exclusive() is not
checked correctly. The test is done against a wrong variable. This
patch fix it.

Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: dsa: gswip: Fix return value check in gswip_probe()
Wei Yongjun [Sat, 15 Sep 2018 01:33:21 +0000 (01:33 +0000)]
net: dsa: gswip: Fix return value check in gswip_probe()

In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().

Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotls: async support causes out-of-bounds access in crypto APIs
John Fastabend [Fri, 14 Sep 2018 20:01:46 +0000 (13:01 -0700)]
tls: async support causes out-of-bounds access in crypto APIs

When async support was added it needed to access the sk from the async
callback to report errors up the stack. The patch tried to use space
after the aead request struct by directly setting the reqsize field in
aead_request. This is an internal field that should not be used
outside the crypto APIs. It is used by the crypto code to define extra
space for private structures used in the crypto context. Users of the
API then use crypto_aead_reqsize() and add the returned amount of
bytes to the end of the request memory allocation before posting the
request to encrypt/decrypt APIs.

So this breaks (with general protection fault and KASAN error, if
enabled) because the request sent to decrypt is shorter than required
causing the crypto API out-of-bounds errors. Also it seems unlikely the
sk is even valid by the time it gets to the callback because of memset
in crypto layer.

Anyways, fix this by holding the sk in the skb->sk field when the
callback is set up and because the skb is already passed through to
the callback handler via void* we can access it in the handler. Then
in the handler we need to be careful to NULL the pointer again before
kfree_skb. I added comments on both the setup (in tls_do_decryption)
and when we clear it from the crypto callback handler
tls_decrypt_done(). After this selftests pass again and fixes KASAN
errors/warnings.

Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Vakul Garg <Vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoip6_gre: simplify gre header parsing in ip6gre_err
Haishuang Yan [Fri, 14 Sep 2018 04:26:48 +0000 (12:26 +0800)]
ip6_gre: simplify gre header parsing in ip6gre_err

Same as ip_gre, use gre_parse_header to parse gre header in gre error
handler code.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoip_gre: fix parsing gre header in ipgre_err
Haishuang Yan [Fri, 14 Sep 2018 04:26:47 +0000 (12:26 +0800)]
ip_gre: fix parsing gre header in ipgre_err

gre_parse_header stops parsing when csum_err is encountered, which means
tpi->key is undefined and ip_tunnel_lookup will return NULL improperly.

This patch introduce a NULL pointer as csum_err parameter. Even when
csum_err is encountered, it won't return error and continue parsing gre
header as expected.

Fixes: 9f57c67c379d ("gre: Remove support for sharing GRE protocol hook.")
Reported-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: phy: et011c: Remove incorrect PHY_POLL flags
Florian Fainelli [Thu, 13 Sep 2018 18:36:30 +0000 (11:36 -0700)]
net: phy: et011c: Remove incorrect PHY_POLL flags

PHY_POLL is defined as -1 which means that we would be setting all flags of the
PHY driver, this is also not a valid flag to tell PHYLIB about, just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'act_police-lockless-data-path'
David S. Miller [Sun, 16 Sep 2018 22:30:23 +0000 (15:30 -0700)]
Merge branch 'act_police-lockless-data-path'

Davide Caratti says:

====================
net/sched: act_police: lockless data path

the data path of 'police' action can be faster if we avoid using spinlocks:
 - patch 1 converts act_police to use per-cpu counters
 - patch 2 lets act_police use RCU to access its configuration data.

test procedure (using pktgen from https://github.com/netoptimizer):
 # ip link add name eth1 type dummy
 # ip link set dev eth1 up
 # tc qdisc add dev eth1 clsact
 # tc filter add dev eth1 egress matchall action police \
 > rate 2gbit burst 100k conform-exceed pass/pass index 100
 # for c in 1 2 4; do
 > ./pktgen_bench_xmit_mode_queue_xmit.sh -v -s 64 -t $c -n 5000000 -i eth1
 > done

test results (avg. pps/thread):

  $c | before patch |  after patch | improvement
 ----+--------------+--------------+-------------
   1 |      3518448 |      3591240 |  irrelevant
   2 |      3070065 |      3383393 |         10%
   4 |      1540969 |      3238385 |        110%
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet/sched: act_police: don't use spinlock in the data path
Davide Caratti [Thu, 13 Sep 2018 17:29:13 +0000 (19:29 +0200)]
net/sched: act_police: don't use spinlock in the data path

use RCU instead of spinlocks, to protect concurrent read/write on
act_police configuration. This reduces the effects of contention in the
data path, in case multiple readers are present.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet/sched: act_police: use per-cpu counters
Davide Caratti [Thu, 13 Sep 2018 17:29:12 +0000 (19:29 +0200)]
net/sched: act_police: use per-cpu counters

use per-CPU counters, instead of sharing a single set of stats with all
cores. This removes the need of using spinlock when statistics are read
or updated.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agocxgb4: update supported DCB version
Ganesh Goudar [Fri, 14 Sep 2018 12:05:55 +0000 (17:35 +0530)]
cxgb4: update supported DCB version

- In CXGB4_DCB_STATE_FW_INCOMPLETE state check if the dcb
  version is changed and update the dcb supported version.

- Also, fill the priority code point value for priority
  based flow control.

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agocxgb4: add per rx-queue counter for packet errors
Ganesh Goudar [Fri, 14 Sep 2018 09:16:04 +0000 (14:46 +0530)]
cxgb4: add per rx-queue counter for packet errors

print per rx-queue packet errors in sge_qinfo

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agocxgb4: Fix endianness issue in t4_fwcache()
Ganesh Goudar [Fri, 14 Sep 2018 09:06:27 +0000 (14:36 +0530)]
cxgb4: Fix endianness issue in t4_fwcache()

Do not put host-endian 0 or 1 into big endian feild.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: move definition of pcpu_lstats to header file
Li RongQing [Fri, 14 Sep 2018 08:00:51 +0000 (16:00 +0800)]
net: move definition of pcpu_lstats to header file

pcpu_lstats is defined in several files, so unify them as one
and move to header file

Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet/ibm/emac: Remove VLA usage
Kees Cook [Thu, 13 Sep 2018 21:23:56 +0000 (14:23 -0700)]
net/ibm/emac: Remove VLA usage

In the quest to remove all stack VLA usage from the kernel[1], this
removes the VLA used for the emac xaht registers size. Since the size
of registers can only ever be 4 or 8, as detected in emac_init_config(),
the max can be hardcoded and a runtime test added for robustness.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christian Lamparter <chunkeey@gmail.com>
Cc: Ivan Mikhaylov <ivan@de.ibm.com>
Cc: netdev@vger.kernel.org
Co-developed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agopktgen: Fix fall-through annotation
Gustavo A. R. Silva [Thu, 13 Sep 2018 19:03:20 +0000 (14:03 -0500)]
pktgen: Fix fall-through annotation

Replace "fallthru" with a proper "fall through" annotation.

This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotg3: Fix fall-through annotations
Gustavo A. R. Silva [Thu, 13 Sep 2018 18:39:22 +0000 (13:39 -0500)]
tg3: Fix fall-through annotations

Replace "fallthru" with a proper "fall through" annotation.

This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agogso_segment: Reset skb->mac_len after modifying network header
Toke Høiland-Jørgensen [Thu, 13 Sep 2018 14:43:07 +0000 (16:43 +0200)]
gso_segment: Reset skb->mac_len after modifying network header

When splitting a GSO segment that consists of encapsulated packets, the
skb->mac_len of the segments can end up being set wrong, causing packet
drops in particular when using act_mirred and ifb interfaces in
combination with a qdisc that splits GSO packets.

This happens because at the time skb_segment() is called, network_header
will point to the inner header, throwing off the calculation in
skb_reset_mac_len(). The network_header is subsequently adjust by the
outer IP gso_segment handlers, but they don't set the mac_len.

Fix this by adding skb_reset_mac_len() calls to both the IPv4 and IPv6
gso_segment handlers, after they modify the network_header.

Many thanks to Eric Dumazet for his help in identifying the cause of
the bug.

Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agovxlan: Remove duplicated include from vxlan.h
YueHaibing [Thu, 13 Sep 2018 13:32:23 +0000 (21:32 +0800)]
vxlan: Remove duplicated include from vxlan.h

Remove duplicated include.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: dsa: b53: Do not fail when IRQ are not initialized
Florian Fainelli [Thu, 13 Sep 2018 16:50:45 +0000 (09:50 -0700)]
net: dsa: b53: Do not fail when IRQ are not initialized

When the Device Tree is not providing the per-port interrupts, do not fail
during b53_srab_irq_enable() but instead bail out gracefully. The SRAB driver
is used on the BCM5301X (Northstar) platforms which do not yet have the SRAB
interrupts wired up.

Fixes: 16994374a6fc ("net: dsa: b53: Make SRAB driver manage port interrupts")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'vhost_net-TX-batching'
David S. Miller [Thu, 13 Sep 2018 16:25:41 +0000 (09:25 -0700)]
Merge branch 'vhost_net-TX-batching'

Jason Wang says:

====================
vhost_net TX batching

This series tries to batch submitting packets to underlayer socket
through msg_control during sendmsg(). This is done by:

1) Doing userspace copy inside vhost_net
2) Build XDP buff
3) Batch at most 64 (VHOST_NET_BATCH) XDP buffs and submit them once
   through msg_control during sendmsg().
4) Underlayer sockets can use XDP buffs directly when XDP is enalbed,
   or build skb based on XDP buff.

For the packet that can not be built easily with XDP or for the case
that batch submission is hard (e.g sndbuf is limited). We will go for
the previous slow path, passing iov iterator to underlayer socket
through sendmsg() once per packet.

This can help to improve cache utilization and avoid lots of indirect
calls with sendmsg(). It can also co-operate with the batching support
of the underlayer sockets (e.g the case of XDP redirection through
maps).

Testpmd(txonly) in guest shows obvious improvements:

Test                /+pps%
XDP_DROP on TAP     /+44.8%
XDP_REDIRECT on TAP /+29%
macvtap (skb)       /+26%

Netperf TCP_STREAM TX from guest shows obvious improvements on small
packet:

    size/session/+thu%/+normalize%
       64/     1/   +2%/    0%
       64/     2/   +3%/   +1%
       64/     4/   +7%/   +5%
       64/     8/   +8%/   +6%
      256/     1/   +3%/    0%
      256/     2/  +10%/   +7%
      256/     4/  +26%/  +22%
      256/     8/  +27%/  +23%
      512/     1/   +3%/   +2%
      512/     2/  +19%/  +14%
      512/     4/  +43%/  +40%
      512/     8/  +45%/  +41%
     1024/     1/   +4%/    0%
     1024/     2/  +27%/  +21%
     1024/     4/  +38%/  +73%
     1024/     8/  +15%/  +24%
     2048/     1/  +10%/   +7%
     2048/     2/  +16%/  +12%
     2048/     4/    0%/   +2%
     2048/     8/    0%/   +2%
     4096/     1/  +36%/  +60%
     4096/     2/  -11%/  -26%
     4096/     4/    0%/  +14%
     4096/     8/    0%/   +4%
    16384/     1/   -1%/   +5%
    16384/     2/    0%/   +2%
    16384/     4/    0%/   -3%
    16384/     8/    0%/   +4%
    65535/     1/    0%/  +10%
    65535/     2/    0%/   +8%
    65535/     4/    0%/   +1%
    65535/     8/    0%/   +3%

Please review.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agovhost_net: batch submitting XDP buffers to underlayer sockets
Jason Wang [Wed, 12 Sep 2018 03:17:09 +0000 (11:17 +0800)]
vhost_net: batch submitting XDP buffers to underlayer sockets

This patch implements XDP batching for vhost_net. The idea is first to
try to do userspace copy and build XDP buff directly in vhost. Instead
of submitting the packet immediately, vhost_net will batch them in an
array and submit every 64 (VHOST_NET_BATCH) packets to the under layer
sockets through msg_control of sendmsg().

When XDP is enabled on the TUN/TAP, TUN/TAP can process XDP inside a
loop without caring GUP thus it can do batch map flushing. When XDP is
not enabled or not supported, the underlayer socket need to build skb
and pass it to network core. The batched packet submission allows us
to do batching like netif_receive_skb_list() in the future.

This saves lots of indirect calls for better cache utilization. For
the case that we can't so batching e.g when sndbuf is limited or
packet size is too large, we will go for usual one packet per
sendmsg() way.

Doing testpmd on various setups gives us:

Test                /+pps%
XDP_DROP on TAP     /+44.8%
XDP_REDIRECT on TAP /+29%
macvtap (skb)       /+26%

Netperf tests shows obvious improvements for small packet transmission:

size/session/+thu%/+normalize%
   64/     1/   +2%/    0%
   64/     2/   +3%/   +1%
   64/     4/   +7%/   +5%
   64/     8/   +8%/   +6%
  256/     1/   +3%/    0%
  256/     2/  +10%/   +7%
  256/     4/  +26%/  +22%
  256/     8/  +27%/  +23%
  512/     1/   +3%/   +2%
  512/     2/  +19%/  +14%
  512/     4/  +43%/  +40%
  512/     8/  +45%/  +41%
 1024/     1/   +4%/    0%
 1024/     2/  +27%/  +21%
 1024/     4/  +38%/  +73%
 1024/     8/  +15%/  +24%
 2048/     1/  +10%/   +7%
 2048/     2/  +16%/  +12%
 2048/     4/    0%/   +2%
 2048/     8/    0%/   +2%
 4096/     1/  +36%/  +60%
 4096/     2/  -11%/  -26%
 4096/     4/    0%/  +14%
 4096/     8/    0%/   +4%
16384/     1/   -1%/   +5%
16384/     2/    0%/   +2%
16384/     4/    0%/   -3%
16384/     8/    0%/   +4%
65535/     1/    0%/  +10%
65535/     2/    0%/   +8%
65535/     4/    0%/   +1%
65535/     8/    0%/   +3%

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotap: accept an array of XDP buffs through sendmsg()
Jason Wang [Wed, 12 Sep 2018 03:17:08 +0000 (11:17 +0800)]
tap: accept an array of XDP buffs through sendmsg()

This patch implement TUN_MSG_PTR msg_control type. This type allows
the caller to pass an array of XDP buffs to tuntap through ptr field
of the tun_msg_control. Tap will build skb through those XDP buffers.

This will avoid lots of indirect calls thus improves the icache
utilization and allows to do XDP batched flushing when doing XDP
redirection.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotuntap: accept an array of XDP buffs through sendmsg()
Jason Wang [Wed, 12 Sep 2018 03:17:07 +0000 (11:17 +0800)]
tuntap: accept an array of XDP buffs through sendmsg()

This patch implement TUN_MSG_PTR msg_control type. This type allows
the caller to pass an array of XDP buffs to tuntap through ptr field
of the tun_msg_control. If an XDP program is attached, tuntap can run
XDP program directly. If not, tuntap will build skb and do a fast
receiving since part of the work has been done by vhost_net.

This will avoid lots of indirect calls thus improves the icache
utilization and allows to do XDP batched flushing when doing XDP
redirection.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotun: switch to new type of msg_control
Jason Wang [Wed, 12 Sep 2018 03:17:06 +0000 (11:17 +0800)]
tun: switch to new type of msg_control

This patch introduces to a new tun/tap specific msg_control:

#define TUN_MSG_UBUF 1
#define TUN_MSG_PTR  2
struct tun_msg_ctl {
       int type;
       void *ptr;
};

This allows us to pass different kinds of msg_control through
sendmsg(). The first supported type is ubuf (TUN_MSG_UBUF) which will
be used by the existed vhost_net zerocopy code. The second is XDP
buff, which allows vhost_net to pass XDP buff to TUN. This could be
used to implement accepting an array of XDP buffs from vhost_net in
the following patches.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotuntap: move XDP flushing out of tun_do_xdp()
Jason Wang [Wed, 12 Sep 2018 03:17:05 +0000 (11:17 +0800)]
tuntap: move XDP flushing out of tun_do_xdp()

This will allow adding batch flushing on top.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotuntap: split out XDP logic
Jason Wang [Wed, 12 Sep 2018 03:17:04 +0000 (11:17 +0800)]
tuntap: split out XDP logic

This patch split out XDP logic into a single function. This make it to
be reused by XDP batching path in the following patch.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotuntap: tweak on the path of skb XDP case in tun_build_skb()
Jason Wang [Wed, 12 Sep 2018 03:17:03 +0000 (11:17 +0800)]
tuntap: tweak on the path of skb XDP case in tun_build_skb()

If we're sure not to go native XDP, there's no need for several things
like bh and rcu stuffs. So this patch introduces a helper to build skb
and hold page refcnt. When we found we will go through skb path, build
skb directly.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotuntap: simplify error handling in tun_build_skb()
Jason Wang [Wed, 12 Sep 2018 03:17:02 +0000 (11:17 +0800)]
tuntap: simplify error handling in tun_build_skb()

There's no need to duplicate page get logic in each action. So this
patch tries to get page and calculate the offset before processing XDP
actions (except for XDP_DROP), and undo them when meet errors (we
don't care the performance on errors). This will be used for factoring
out XDP logic.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotuntap: enable bh early during processing XDP
Jason Wang [Wed, 12 Sep 2018 03:17:01 +0000 (11:17 +0800)]
tuntap: enable bh early during processing XDP

This patch move the bh enabling a little bit earlier, this will be
used for factoring out the core XDP logic of tuntap.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotuntap: switch to use XDP_PACKET_HEADROOM
Jason Wang [Wed, 12 Sep 2018 03:17:00 +0000 (11:17 +0800)]
tuntap: switch to use XDP_PACKET_HEADROOM

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: sock: introduce SOCK_XDP
Jason Wang [Wed, 12 Sep 2018 03:16:59 +0000 (11:16 +0800)]
net: sock: introduce SOCK_XDP

This patch introduces a new sock flag - SOCK_XDP. This will be used
for notifying the upper layer that XDP program is attached on the
lower socket, and requires for extra headroom.

TUN will be the first user.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agollc: avoid blocking in llc_sap_close()
Cong Wang [Tue, 11 Sep 2018 18:42:06 +0000 (11:42 -0700)]
llc: avoid blocking in llc_sap_close()

llc_sap_close() is called by llc_sap_put() which
could be called in BH context in llc_rcv(). We can't
block in BH.

There is no reason to block it here, kfree_rcu() should
be sufficient.

Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoipv6: Add sockopt IPV6_MULTICAST_ALL analogue to IP_MULTICAST_ALL
Andre Naujoks [Mon, 10 Sep 2018 08:27:15 +0000 (10:27 +0200)]
ipv6: Add sockopt IPV6_MULTICAST_ALL analogue to IP_MULTICAST_ALL

The socket option will be enabled by default to ensure current behaviour
is not changed. This is the same for the IPv4 version.

A socket bound to in6addr_any and a specific port will receive all traffic
on that port. Analogue to IP_MULTICAST_ALL, disable this behaviour, if
one or more multicast groups were joined (using said socket) and only
pass on multicast traffic from groups, which were explicitly joined via
this socket.

Without this option disabled a socket (system even) joined to multiple
multicast groups is very hard to get right. Filtering by destination
address has to take place in user space to avoid receiving multicast
traffic from other multicast groups, which might have traffic on the same
port.

The extension of the IP_MULTICAST_ALL socketoption to just apply to ipv6,
too, is not done to avoid changing the behaviour of current applications.

Signed-off-by: Andre Naujoks <nautsch2@gmail.com>
Acked-By: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'Lantiq-Intel-vrx200-support'
David S. Miller [Thu, 13 Sep 2018 15:14:34 +0000 (08:14 -0700)]
Merge branch 'Lantiq-Intel-vrx200-support'

Hauke Mehrtens says:

====================
Add support for Lantiq / Intel vrx200 network

This adds basic support for the GSWIP (Gigabit Switch) found in the
VRX200 SoC.
There are different versions of this IP core used in different SoCs, but
this driver was currently only tested on the VRX200 SoC line, for other
SoCs this driver probably need some adoptions to work.

I also plan to add Layer 2 offloading to the DSA driver and later also
layer 3 offloading which is supported by the PPE HW block.

All these patches should go through the net-next tree.

This depends on the patch "MIPS: lantiq: dma: add dev pointer" which
should go into 4.19.

Changes since:
v2:
 * Send patch "MIPS: lantiq: dma: add dev pointer" separately
 * all: removed return in register write functions
 * switch: uses phylink
 * switch: uses hardware MDIO auto polling
 * switch: use usleep_range() in MDIO busy check
 * switch: configure MDIO bus to 2.5 MHz
 * switch: disable xMII link when it is not used
 * Ethernet: use NAPI for TX cleanups
 * Ethernet: enable clock in open callback
 * Ethernet: improve skb allocation
 * Ethernet: use net_dev->stats

v1:
 * Add "MIPS: lantiq: dma: add dev pointer"
 * checkpatch fixes a all patches
 * Added binding documentation
 * use readx_poll_timeout function and ETIMEOUT error code
 * integrate GPHY firmware loading into DSA driver
 * renamed to NET_DSA_LANTIQ_GSWIP
 * removed some needed casts
 * added of_device_id.data information about the detected switch
 * fixed John's email address
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: dsa: Add Lantiq / Intel DSA driver for vrx200
Hauke Mehrtens [Sun, 9 Sep 2018 20:20:39 +0000 (22:20 +0200)]
net: dsa: Add Lantiq / Intel DSA driver for vrx200

This adds the DSA driver for the GSWIP Switch found in the VRX200 SoC.
This switch is integrated in the DSL SoC, this SoC uses a GSWIP version
2.1, there are other SoCs using different versions of this IP block, but
this driver was only tested with the version found in the VRX200.
Currently only the basic features are implemented which will forward all
packages to the CPU and let the CPU do the forwarding. The hardware also
support Layer 2 offloading which is not yet implemented in this driver.

The GPHY FW loaded is now done by this driver and not any more by the
separate driver in drivers/soc/lantiq/gphy.c, I will remove this driver
is a separate patch. to make use of the GPHY this switch driver is
needed anyway. Other SoCs have more embedded GPHYs so this driver should
support a variable number of GPHYs. After the firmware was loaded the
GPHY can be probed on the MDIO bus and it behaves like an external GPHY,
without the firmware it can not be probed on the MDIO bus.

The clock names in the sysctrl.c file have to be changed because the
clocks are now used by a different driver. This should be cleaned up and
a real common clock driver should provide the clocks instead.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agodt-bindings: net: dsa: Add lantiq, xrx200-gswip DT bindings
Hauke Mehrtens [Sun, 9 Sep 2018 20:20:27 +0000 (22:20 +0200)]
dt-bindings: net: dsa: Add lantiq, xrx200-gswip DT bindings

This adds the binding for the GSWIP (Gigabit switch) core found in the
xrx200 / VR9 Lantiq / Intel SoC.

This part takes care of the switch, MDIO bus, and loading the FW into
the embedded GPHYs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: devicetree@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: lantiq: Add Lantiq / Intel VRX200 Ethernet driver
Hauke Mehrtens [Sun, 9 Sep 2018 20:16:45 +0000 (22:16 +0200)]
net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver

This drives the PMAC between the GSWIP Switch and the CPU in the VRX200
SoC. This is currently only the very basic version of the Ethernet
driver.

When the DMA channel is activated we receive some packets which were
send to the SoC while it was still in U-Boot, these packets have the
wrong header. Resetting the IP cores did not work so we read out the
extra packets at the beginning and discard them.

This also adapts the clock code in sysctrl.c to use the default name of
the device node so that the driver gets the correct clock. sysctrl.c
should be replaced with a proper common clock driver later.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agodt-bindings: net: Add lantiq, xrx200-net DT bindings
Hauke Mehrtens [Sun, 9 Sep 2018 20:16:44 +0000 (22:16 +0200)]
dt-bindings: net: Add lantiq, xrx200-net DT bindings

This adds the binding for the PMAC core between the CPU and the GSWIP
switch found on the xrx200 / VR9 Lantiq / Intel SoC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: devicetree@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: dsa: Add Lantiq / Intel GSWIP tag support
Hauke Mehrtens [Sun, 9 Sep 2018 20:16:43 +0000 (22:16 +0200)]
net: dsa: Add Lantiq / Intel GSWIP tag support

This handles the tag added by the PMAC on the VRX200 SoC line.

The GSWIP uses internally a GSWIP special tag which is located after the
Ethernet header. The PMAC which connects the GSWIP to the CPU converts
this special tag used by the GSWIP into the PMAC special tag which is
added in front of the Ethernet header.

This was tested with GSWIP 2.1 found in the VRX200 SoCs, other GSWIP
versions use slightly different PMAC special tags.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMIPS: lantiq: Do not enable IRQs in dma open
Hauke Mehrtens [Sun, 9 Sep 2018 20:16:42 +0000 (22:16 +0200)]
MIPS: lantiq: Do not enable IRQs in dma open

When a DMA channel is opened the IRQ should not get activated
automatically, this allows it to pull data out manually without the help
of interrupts. This is needed for a workaround in the vrx200 Ethernet
driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Thu, 13 Sep 2018 05:22:42 +0000 (22:22 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

6 years agodocs: net: Remove TCP congestion document
Tobin C. Harding [Wed, 12 Sep 2018 08:14:44 +0000 (18:14 +1000)]
docs: net: Remove TCP congestion document

Document is stale, let's remove it.

Remove TCP congestion document.

Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agogeneve: add ttl inherit support
Hangbin Liu [Wed, 12 Sep 2018 02:04:21 +0000 (10:04 +0800)]
geneve: add ttl inherit support

Similar with commit 72f6d71e491e6 ("vxlan: add ttl inherit support"),
currently ttl == 0 means "use whatever default value" on geneve instead
of inherit inner ttl. To respect compatibility with old behavior, let's
add a new IFLA_GENEVE_TTL_INHERIT for geneve ttl inherit support.

Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Thu, 13 Sep 2018 03:36:47 +0000 (17:36 -1000)]
Merge tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm

Pull drm nouveau fixes from Dave Airlie:
 "I'm sending this separately as it's a bit larger than I generally like
  for one driver, but it does contain a bunch of make my nvidia laptop
  not die (runpm) and a bunch to make my docking station and monitor
  display stuff (mst) fixes.

  Lyude has spent a lot of time on these, and we are putting the fixes
  into distro kernels as well asap, as it helps a bunch of standard
  Lenovo laptops, so I'm fairly happy things are better than they were
  before these patches, but I decided to split them out just for
  clarification"

* tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/disp/gm200-: enforce identity-mapped SOR assignment for LVDS/eDP panels
  drm/nouveau/disp: fix DP disable race
  drm/nouveau/disp: move eDP panel power handling
  drm/nouveau/disp: remove unused struct member
  drm/nouveau/TBDdevinit: don't fail when PMU/PRE_OS is missing from VBIOS
  drm/nouveau/mmu: don't attempt to dereference vmm without valid instance pointer
  drm/nouveau: fix oops in client init failure path
  drm/nouveau: Fix nouveau_connector_ddc_detect()
  drm/nouveau/drm/nouveau: Don't forget to cancel hpd_work on suspend/unload
  drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early
  drm/nouveau: Reset MST branching unit before enabling
  drm/nouveau: Only write DP_MSTM_CTRL when needed
  drm/nouveau: Remove useless poll_enable() call in drm_load()
  drm/nouveau: Remove useless poll_disable() call in switcheroo_set_state()
  drm/nouveau: Remove useless poll_enable() call in switcheroo_set_state()
  drm/nouveau: Fix deadlocks in nouveau_connector_detect()
  drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect()
  drm/nouveau/drm/nouveau: Fix deadlock with fb_helper with async RPM requests
  drm/nouveau: Remove duplicate poll_enable() in pmops_runtime_suspend()
  drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement

6 years agonet: dsa: mv88e6xxx: Make sure to configure ports with external PHYs
Marek Vasut [Tue, 11 Sep 2018 22:15:24 +0000 (00:15 +0200)]
net: dsa: mv88e6xxx: Make sure to configure ports with external PHYs

The MV88E6xxx can have external PHYs attached to certain ports and those
PHYs could even be on different MDIO bus than the one within the switch.
This patch makes sure that ports with such PHYs are configured correctly
according to the information provided by the PHY.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: ethernet: Use DIV_ROUND_UP instead of reimplementing its function
zhong jiang [Tue, 11 Sep 2018 13:08:15 +0000 (21:08 +0800)]
net: ethernet: Use DIV_ROUND_UP instead of reimplementing its function

DIV_ROUND_UP has implemented the code-opened function. Therefore, just
replace the implementation with DIV_ROUND_UP.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoqlcnic: Remove set but not used variables 'fw_mbx' and 'hdr_size'
Yue Haibing [Tue, 11 Sep 2018 11:51:29 +0000 (11:51 +0000)]
qlcnic: Remove set but not used variables 'fw_mbx' and 'hdr_size'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c: In function 'qlcnic_sriov_pull_bc_msg':
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c:907:6: warning:
 variable 'fw_mbx' set but not used [-Wunused-but-set-variable]

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c: In function 'qlcnic_sriov_issue_bc_post':
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c:939:16: warning:
 variable 'hdr_size' set but not used [-Wunused-but-set-variable]

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 13 Sep 2018 03:32:50 +0000 (17:32 -1000)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix up several Kconfig dependencies in netfilter, from Martin Willi
    and Florian Westphal.

 2) Memory leak in be2net driver, from Petr Oros.

 3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem.

 4) mlx5_attach_interface needs to check for errors, from Huy Nguyen.

 5) tipc_release() needs to orphan the sock, from Cong Wang.

 6) Need to program TxConfig register after TX/RX is enabled in r8169
    driver, not beforehand, from Maciej S. Szmigiero.

 7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal.

 8) Fix crash regression in ip_do_fragment(), from Taehee Yoo.

 9) syzbot can create conditions where kernel log is flooded with
    synflood warnings due to creation of many listening sockets, fix
    that. From Willem de Bruijn.

10) Fix RCU issues in rds socket layer, from Cong Wang.

11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  nfp: flower: reject tunnel encap with ipv6 outer headers for offloading
  nfp: flower: fix vlan match by checking both vlan id and vlan pcp
  tipc: check return value of __tipc_dump_start()
  s390/qeth: don't dump past end of unknown HW header
  s390/qeth: use vzalloc for QUERY OAT buffer
  s390/qeth: switch on SG by default for IQD devices
  s390/qeth: indicate error when netdev allocation fails
  rds: fix two RCU related problems
  r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
  erspan: fix error handling for erspan tunnel
  erspan: return PACKET_REJECT when the appropriate tunnel is not found
  tcp: rate limit synflood warnings further
  MIPS: lantiq: dma: add dev pointer
  netfilter: xt_hashlimit: use s->file instead of s->private
  netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
  netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
  netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
  netfilter: conntrack: reset tcp maxwin on re-register
  qmi_wwan: Support dynamic config on Quectel EP06
  ethernet: renesas: convert to SPDX identifiers
  ...

6 years agonet: bridge: add support for sticky fdb entries
Nikolay Aleksandrov [Tue, 11 Sep 2018 06:39:53 +0000 (09:39 +0300)]
net: bridge: add support for sticky fdb entries

Add support for entries which are "sticky", i.e. will not change their port
if they show up from a different one. A new ndm flag is introduced for that
purpose - NTF_STICKY. We allow to set it only to non-local entries.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'Preparing-for-phylib-linkmodes'
David S. Miller [Thu, 13 Sep 2018 03:24:22 +0000 (20:24 -0700)]
Merge branch 'Preparing-for-phylib-linkmodes'

Andrew Lunn says:

====================
Preparing for phylib linkmodes

phylib currently makes us of a u32 bitmap for advertising, supported,
and link partner capabilities. For a long time, this has been
sufficient, for devices up to 1Gbps. With more MAC/PHY combinations
now supporting speeds greater than 1Gbps, we have run out of
bits. There is the need to replace this u32 with an
__ETHTOOL_DECLARE_LINK_MODE_MASK, which makes use of linux's generic
bitmaps.

This patchset does some of the work preparing for this change. A few
cleanups are applied to PHY drivers. Some MAC drivers directly access
members of phydev which are going to change type. These patches adds
some helpers and swaps MAC drivers to use them, mostly dealing with
Pause configuration.

v3:
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Add missing at in commit message
Change Subject of patch 5
Fix return in from phy_set_asym_pause
Fix kerneldoc in phy_set_pause

v2:
Fixup bad indentation in tg3.c
Rename phy_support_pause() to phy_support_sym_pause()
Also trigger autoneg if the advertising settings have changed.
Rename phy_set_pause() to phy_set_sym_pause()
Use the bcm63xx_enet.c logic, not fec_main.c for validating pause
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: ethernet: Add helper to determine if pause configuration is supported
Andrew Lunn [Tue, 11 Sep 2018 23:53:19 +0000 (01:53 +0200)]
net: ethernet: Add helper to determine if pause configuration is supported

Rather than have MAC drivers open code the test, add a helper in
phylib. This will help when we change the type of phydev->supported.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: ethernet: Add helper for set_pauseparam for Pause
Andrew Lunn [Tue, 11 Sep 2018 23:53:18 +0000 (01:53 +0200)]
net: ethernet: Add helper for set_pauseparam for Pause

ethtool can be used to enable/disable pause. Add a helper to configure
the PHY when Pause is supported.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: ethernet: Add helper for set_pauseparam for Asym Pause
Andrew Lunn [Tue, 11 Sep 2018 23:53:17 +0000 (01:53 +0200)]
net: ethernet: Add helper for set_pauseparam for Asym Pause

ethtool can be used to enable/disable pause. Add a helper to configure
the PHY when asym pause is supported.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: ethernet: Add helper for MACs which support pause
Andrew Lunn [Tue, 11 Sep 2018 23:53:16 +0000 (01:53 +0200)]
net: ethernet: Add helper for MACs which support pause

Rather than have the MAC drivers manipulate phydev members, add a
helper function for MACs supporting Pause, but not Asym Pause.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: ethernet: Add helper for MACs which support asym pause
Andrew Lunn [Tue, 11 Sep 2018 23:53:15 +0000 (01:53 +0200)]
net: ethernet: Add helper for MACs which support asym pause

Rather than have the MAC drivers manipulate phydev members to indicate
they support Asym Pause, add a helper function.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: ethernet: Add helper to remove a supported link mode
Andrew Lunn [Tue, 11 Sep 2018 23:53:14 +0000 (01:53 +0200)]
net: ethernet: Add helper to remove a supported link mode

Some MAC hardware cannot support a subset of link modes. e.g. often
1Gbps Full duplex is supported, but Half duplex is not. Add a helper
to remove such a link mode.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: ethernet: Fix up drivers masking pause support
Andrew Lunn [Tue, 11 Sep 2018 23:53:13 +0000 (01:53 +0200)]
net: ethernet: Fix up drivers masking pause support

PHY drivers don't indicate they support pause. They expect MAC drivers
to enable its support if the MAC has the needed hardware. Thus MAC
drivers should not mask Pause support, but enable it.

Change a few ANDs to ORs.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: bcmgenet: Fix speed selection for reverse MII
Andrew Lunn [Tue, 11 Sep 2018 23:53:12 +0000 (01:53 +0200)]
net: bcmgenet: Fix speed selection for reverse MII

The phy supported speed is being used to determine if the MAC should
be configured to 100 or 1G. The masking logic is broken. Instead, look
at 1G supported speeds to enable 1G MAC support.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: ethernet: Use phy_set_max_speed() to limit advertised speed
Andrew Lunn [Tue, 11 Sep 2018 23:53:11 +0000 (01:53 +0200)]
net: ethernet: Use phy_set_max_speed() to limit advertised speed

Many Ethernet MAC drivers want to limit the PHY to only advertise a
maximum speed of 100Mbs or 1Gbps. Rather than using a mask, make use
of the helper function phy_set_max_speed().

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: phy: bcm63xx: Allow to be built with COMPILE_TEST
Andrew Lunn [Tue, 11 Sep 2018 23:53:10 +0000 (01:53 +0200)]
net: phy: bcm63xx: Allow to be built with COMPILE_TEST

There is nothing in this driver which prevents it to be compiled for
other architectures. Add COMPILE_TEST so we get better compile test
coverage.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: phy: et1011c: Remove incorrect missing 1000 Half
Andrew Lunn [Tue, 11 Sep 2018 23:53:09 +0000 (01:53 +0200)]
net: phy: et1011c: Remove incorrect missing 1000 Half

The driver indicates it can do 10/100 full and half duplex, plus 1G
Full. The datasheet indicates 1G half is also supported. So make use
of the standard PHY_GBIT_FEATURES.

It could be, this was added because there is a MAC which does not
support 1G half. Bit this is the wrong place to enforce this.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: phy: ste10Xp: Remove wrong SUPPORTED_Pause
Andrew Lunn [Tue, 11 Sep 2018 23:53:08 +0000 (01:53 +0200)]
net: phy: ste10Xp: Remove wrong SUPPORTED_Pause

The PHY driver should not indicate that Pause is supported. It is upto
the MAC drive enable it, if it supports Pause frames. So remove it
from the ste10Xp driver.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonfp: report FW vNIC stats in interface stats
Jakub Kicinski [Tue, 11 Sep 2018 13:44:08 +0000 (06:44 -0700)]
nfp: report FW vNIC stats in interface stats

Report in standard netdev stats drops and errors as well as
RX multicast from the FW vNIC counters.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'nfp-flower-fixes'
David S. Miller [Wed, 12 Sep 2018 20:18:30 +0000 (13:18 -0700)]
Merge branch 'nfp-flower-fixes'

Jakub Kicinski says:

====================
nfp: flower: fixes for flower offload

Two fixes for flower matching and tunnel encap.  Pieter fixes
VLAN matching if the entire VLAN id is masked out and match
is only performed on the PCP field.  Louis adds validation of
tunnel flags for encap, most importantly we should not offload
actions on IPv6 tunnels if it's not supported.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonfp: flower: reject tunnel encap with ipv6 outer headers for offloading
Louis Peens [Tue, 11 Sep 2018 13:38:45 +0000 (06:38 -0700)]
nfp: flower: reject tunnel encap with ipv6 outer headers for offloading

This fixes a bug where ipv6 tunnels would report that it is
getting offloaded to hardware but would actually be rejected
by hardware.

Fixes: b27d6a95a70d ("nfp: compile flower vxlan tunnel set actions")
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonfp: flower: fix vlan match by checking both vlan id and vlan pcp
Pieter Jansen van Vuuren [Tue, 11 Sep 2018 13:38:44 +0000 (06:38 -0700)]
nfp: flower: fix vlan match by checking both vlan id and vlan pcp

Previously we only checked if the vlan id field is present when trying
to match a vlan tag. The vlan id and vlan pcp field should be treated
independently.

Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotipc: check return value of __tipc_dump_start()
Cong Wang [Tue, 11 Sep 2018 22:12:17 +0000 (15:12 -0700)]
tipc: check return value of __tipc_dump_start()

When __tipc_dump_start() fails with running out of memory,
we have no reason to continue, especially we should avoid
calling tipc_dump_done().

Fixes: 8f5c5fcf3533 ("tipc: call start and done ops directly in __tipc_nl_compat_dumpit()")
Reported-and-tested-by: syzbot+3f8324abccfbf8c74a9f@syzkaller.appspotmail.com
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'qeth-fixes'
David S. Miller [Wed, 12 Sep 2018 20:12:52 +0000 (13:12 -0700)]
Merge branch 'qeth-fixes'

Julian Wiedmann says:

====================
s390/qeth: fixes 2018-09-12

please apply the following qeth fixes for -net.

Patch 1 resolves a regression in an error path, while patch 2 enables
the SG support by default that was newly introduced with 4.19.
Patch 3 takes care of a longstanding problem with large-order
allocations, and patch 4 fixes a potential out-of-bounds access.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agos390/qeth: don't dump past end of unknown HW header
Julian Wiedmann [Wed, 12 Sep 2018 13:31:35 +0000 (15:31 +0200)]
s390/qeth: don't dump past end of unknown HW header

For inbound data with an unsupported HW header format, only dump the
actual HW header. We have no idea how much payload follows it, and what
it contains. Worst case, we dump past the end of the Inbound Buffer and
access whatever is located next in memory.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agos390/qeth: use vzalloc for QUERY OAT buffer
Wenjia Zhang [Wed, 12 Sep 2018 13:31:34 +0000 (15:31 +0200)]
s390/qeth: use vzalloc for QUERY OAT buffer

qeth_query_oat_command() currently allocates the kernel buffer for
the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with
fragmented memory, large allocations may fail (eg. the qethqoat tool by
default uses 132KB).

Solve this issue by using vzalloc, backing the allocation with
non-contiguous memory.

Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agos390/qeth: switch on SG by default for IQD devices
Julian Wiedmann [Wed, 12 Sep 2018 13:31:33 +0000 (15:31 +0200)]
s390/qeth: switch on SG by default for IQD devices

Scatter-gather transmit brings a nice performance boost. Considering the
rather large MTU sizes at play, it's also totally the Right Thing To Do.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agos390/qeth: indicate error when netdev allocation fails
Julian Wiedmann [Wed, 12 Sep 2018 13:31:32 +0000 (15:31 +0200)]
s390/qeth: indicate error when netdev allocation fails

Bailing out on allocation error is nice, but we also need to tell the
ccwgroup core that creating the qeth groupdev failed.

Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 12 Sep 2018 16:51:27 +0000 (06:51 -1000)]
Merge tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fix from Palmer Dabbelt:
 "This contains what I hope to be the last RISC-V patch for 4.19.

  It fixes a bug in our initramfs support by removing some broken and
  obselete code"

* tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  riscv: Do not overwrite initrd_start and initrd_end

6 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Wed, 12 Sep 2018 16:44:03 +0000 (06:44 -1000)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Three fixes, all in drivers (qedi and iscsi target) so no wider impact
  even if the code changes are a bit extensive"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Add the CRC size within iSCSI NVM image
  scsi: iscsi: target: Fix conn_ops double free
  scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values fails

6 years agords: fix two RCU related problems
Cong Wang [Tue, 11 Sep 2018 01:27:26 +0000 (18:27 -0700)]
rds: fix two RCU related problems

When a rds sock is bound, it is inserted into the bind_hash_table
which is protected by RCU. But when releasing rds sock, after it
is removed from this hash table, it is freed immediately without
respecting RCU grace period. This could cause some use-after-free
as reported by syzbot.

Mark the rds sock with SOCK_RCU_FREE before inserting it into the
bind_hash_table, so that it would be always freed after a RCU grace
period.

The other problem is in rds_find_bound(), the rds sock could be
freed in between rhashtable_lookup_fast() and rds_sock_addref(),
so we need to extend RCU read lock protection in rds_find_bound()
to close this race condition.

Reported-and-tested-by: syzbot+8967084bcac563795dc6@syzkaller.appspotmail.com
Reported-by: syzbot+93a5839deb355537440f@syzkaller.appspotmail.com
Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: rds-devel@oss.oracle.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oarcle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonetlink: remove hash::nelems check in netlink_insert
Li RongQing [Tue, 11 Sep 2018 01:05:01 +0000 (09:05 +0800)]
netlink: remove hash::nelems check in netlink_insert

The type of hash::nelems has been changed from size_t to atom_t
which in fact is int, so not need to check if BITS_PER_LONG, that
is bit number of size_t, is bigger than 32

and rht_grow_above_max() will be called to check if hashtable is
too big, ensure it can not bigger than 1<<31

Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoscsi: libcxgbi: fib6_ino reference in rt6_info is rcu protected
David Ahern [Tue, 11 Sep 2018 00:21:42 +0000 (17:21 -0700)]
scsi: libcxgbi: fib6_ino reference in rt6_info is rcu protected

The fib6_info reference in rt6_info is rcu protected. Add a helper
to extract prefsrc from and update cxgbi_check_route6 to use it.

Fixes: 0153167aebd0 ("net/ipv6: Remove rt6i_prefsrc")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: dsa: b53: Only call b53_port_event() for SGMII ports
Florian Fainelli [Mon, 10 Sep 2018 23:47:07 +0000 (16:47 -0700)]
net: dsa: b53: Only call b53_port_event() for SGMII ports

Built-in PHY ports are still being polled, avoid generating spurious
and duplicate events which the PHY library resolves through polling
anyways.

Fixes: 0e01491de646 ("net: dsa: b53: Add SerDes support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agor8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
Kai-Heng Feng [Mon, 10 Sep 2018 17:51:43 +0000 (01:51 +0800)]
r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED

After system suspend, sometimes the r8169 doesn't work when ethernet
cable gets pluggued.

This issue happens because rtl_reset_work() doesn't get called from
rtl8169_runtime_resume(), after system suspend.

In rtl_task(), RTL_FLAG_TASK_* only gets cleared if this condition is
met:
if (!netif_running(dev) ||
    !test_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags))
    ...

If RTL_FLAG_TASK_ENABLED was cleared during system suspend while
RTL_FLAG_TASK_RESET_PENDING was set, the next rtl_schedule_task() won't
schedule task as the flag is still there.

So in addition to clearing RTL_FLAG_TASK_ENABLED, also clears other
flags.

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet/tls: Fixed return value when tls_complete_pending_work() fails
Vakul Garg [Mon, 10 Sep 2018 17:23:46 +0000 (22:53 +0530)]
net/tls: Fixed return value when tls_complete_pending_work() fails

In tls_sw_sendmsg() and tls_sw_sendpage(), the variable 'ret' has
been set to return value of tls_complete_pending_work(). This allows
return of proper error code if tls_complete_pending_work() fails.

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoerspan: fix error handling for erspan tunnel
Haishuang Yan [Mon, 10 Sep 2018 14:19:48 +0000 (22:19 +0800)]
erspan: fix error handling for erspan tunnel

When processing icmp unreachable message for erspan tunnel, tunnel id
should be erspan_net_id instead of ipgre_net_id.

Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoerspan: return PACKET_REJECT when the appropriate tunnel is not found
Haishuang Yan [Mon, 10 Sep 2018 14:19:47 +0000 (22:19 +0800)]
erspan: return PACKET_REJECT when the appropriate tunnel is not found

If erspan tunnel hasn't been established, we'd better send icmp port
unreachable message after receive erspan packets.

Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'aquantia-implement-WOL-and-EEE-support'
David S. Miller [Wed, 12 Sep 2018 06:41:03 +0000 (23:41 -0700)]
Merge branch 'aquantia-implement-WOL-and-EEE-support'

Igor Russkikh says:

====================
net: aquantia: implement WOL and EEE support

This is v3 of WOL/EEE functionality patch for atlantic driver.

In this patchset Yana Esina and Nikita Danilov implemented:

- Upload function to interact with FW memory
- Definitions and structures necessary for the correct operation of Wake ON Lan
- The functionality Wake On Lan via ethtool (Magic packet is supported)
- The functionality for Energy-Efficient Ethernet configuration via ethtool

Version 3:
- use ETH_ALEN instead of raw number

Version 2 has the following fixes:
- patchset reorganized to extract renaming and whitespace fixes into separate
  patches
- some of magic numbers replaced with defines
- reverse christmas tree applied
====================

Signed-off-by: David S. Miller <davem@davemloft.net>