Yang Yingliang [Thu, 25 Nov 2021 07:16:08 +0000 (15:16 +0800)]
ASoC: SOF: mediatek: Add missing of_node_put() in platform_parse_resource()
The node pointer is returned by of_parse_phandle() with
refcount incremented in platform_parse_resource(). Calling
of_node_put() to aovid the refcount leak.
Mark Brown [Wed, 24 Nov 2021 17:33:54 +0000 (17:33 +0000)]
ASoC: SOF: Intel: power optimizations with HDaudio SPIB register
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The use of the SPIB register helps reduce power consumption - though
to a smaller degree than DMI_L1. This hardware capability is however
incompatible with userspace-initiated rewinds typically used by
PulseAudio.
In the past (2015..2017) Intel suggested an API extension to let
applications disable rewinds. At the time the feedback was that such a
capability was too Intel-specific and SPIB remained unused except for
loading DSP code. We now see devices with smaller batteries being
released, and it's time to revisit Linux support for SPIB to extend
battery life.
In this update the rewinds are disabled via an opt-in kernel
parameter. In the previous reviews, there was consensus that a Kconfig
option was too complicated for distributions to set, and we are
missing a TBD API to expose such capabilities to user-space.
The debate on whether or not to use rewinds, and the impact of
disabling rewinds, will likely be closed when Intel releases the
'deep-buffer' support, currently under development [2][3]. With this
solution, rewinds will not be needed, ever. When an application deals
with content that is not latency-sensitive (e.g. music playback), it
will be able to reduce power consumption by selecting a different PCM
device with increased buffering capabilities. Low-latency streams
will be handled by the 'regular' path. In other words, the impossible
compromise between power and latency will be handled with different
PCM devices/profiles for the same endpoint, and we can push the design
of capability negotiation to a later time when all the building blocks
(firmware topology, kernel, userspace) are ready - we still have
firmware xruns, DPCM race conditions to solve, and a need to describe
these alternate PCM devices with UCM using 'modifiers'.
ASoC: SOF: handle paused streams during system suspend
During system suspend, paused streams do not get suspended.
Therefore, we need to explicitly free these PCMs in the DSP
and free the associated DAPM widgets so that they can be set
up again during resume.
Fixes: 5fcdbb2d45df ("ASoC: SOF: Add support for dynamic pipelines") Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211123171606.129350-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: sof-audio: setup sched widgets during pipeline complete step
Older firmware prior to ABI 3.19 has a dependency where the scheduler
widgets need to be setup last. Moving the call to sof_widget_setup()
before the pipeline_complete() call also helps remove the need for the
'reverse' direction when walking through the widget list - this was
only working because of the topology macros but the topology does not
require any order.
Fixes: 5fcdbb2d45df ("ASoC: SOF: Add support for dynamic pipelines") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211123171606.129350-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: Intel: add .ack support for HDaudio platforms
When we disable rewinds, then the .ack can be used to program SPIB
with the application pointer, which allows the HDaudio DMA to save
power by opportunistically bursting data transfers when the path to
memory is enabled (and conversely to shut it down when there are no
transfer requests).
The SPIB register can only be programmed with incremental values with
wrap-around after the DMA RUN bits are set. For simplicity, we set the
INFO_NO_REWINDS flag in the .open callback when we already need to
program the SNDRV_PCM_INFO_SYNC_APPLPTR flag.
Rewinds are not used by many applications. One notable application
using rewinds is PulseAudio. Practical experiments with
Ubuntu/PulseAudio default settings did not show any audible issues,
but the user may hear volume changes and notification with a delay,
depending on the size of the ring buffer and latency constraints.
The choice of disabling rewinds is exposed as a kernel parameter and
not a Kconfig option to avoid any undesirable side-effects.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20211119230852.206310-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
When the hardware can only deal with a monotonically increasing
appl_ptr, this flag can be set.
In case the application requests a rewind, be it with a
snd_pcm_rewind() or with a direct change of a mmap'ed pointer followed
by a SNDRV_PCM_IOCTL_SYNC_PTR, this patch checks if a rewind
occurred and returns an error.
Credits to Takashi Iwai for identifying the path with SYNC_PTR and
suggesting the pointer checks.
Suggested-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211119230852.206310-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA: pcm: unconditionally check if appl_ptr is in 0..boundary range
In some cases, the appl_ptr passed by userspace is not checked before
being used. This patch adds an unconditional check and returns an
error code should the appl_ptr exceed the ALSA 'boundary'.
Suggested-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211119230852.206310-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Mon, 22 Nov 2021 23:56:00 +0000 (23:56 +0000)]
Support BCLK input clock in tlv320aic31xx
Merge series from Ariel D'Alessandro <ariel.dalessandro@collabora.com>:
This patchset modifies the tlv320aic31xx driver to update its sysclk if
BCLK is used as the input clock. This allows to be used by the generic
fsl-asoc-card, without having to add a specific driver.
Mark Brown [Mon, 22 Nov 2021 23:55:59 +0000 (23:55 +0000)]
ASoC: SOF: enable multicore with dynamic pipelines
Merge series from Kai Vehmanen <kai.vehmanen@linux.intel.com>:
When a pipeline is marked dynamic in the SOF DSP firmware
topology definition (the tplg file kernel loads from filesystem),
it means the pipeline resources are not allocated when DSP is
booted (at driver probe, or at runtime resume), but rather delayed
until the pipeline is actually used.
ASoC: tlv320aic31xx: Handle BCLK set as PLL input configuration
If BCLK is used as PLL input, the sysclk is determined by the hw
params. So it must be updated here to match the input frequency, based
on sample rate, format and channels.
ASoC: tlv320aic31xx: Add support for pll_r coefficient
When the clock used by the codec is BCLK, the operation parameters need
to be calculated from input sample rate and format. Low frequency rates
required different r multipliers, in order to achieve a higher PLL
output frequency.
When a jack handler is registered in cs42l42_set_jack() the
initial state should be reported if an attached headphone/headset
has already been detected.
The jack detect sequence takes around 1 second: typically long
enough for the machine driver to probe and register the jack handler
in time to receive the first report from the interrupt handler. So
it is possible on some systems that the correct initial state was seen
simply because of lucky timing. Modular builds were more likely to
miss the reporting of the initial state.
ASoC: SOF: sof-pci-dev: use community key on all Up boards
There are already 3 versions of the Up boards with support for the SOF
community key (ApolloLake, WhiskyLake, TigerLake). Rather than
continue to add quirks for each version, let's add a wildcard.
For WHL and TGL, the authentication supports both the SOF community
key and the firmware signed with the Intel production key. Given two
choices, the community key is the preferred option to allow developers
to sign their own firmware. The firmware signed with production key
can still be selected if needed with a kernel module
option (snd-sof-pci.fw_path="intel/sof")
Tested-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211119231327.211946-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: add support for dynamic pipelines with multi-core
This patch adds support for dynamic pipelines with multi-core
by using the platform-specific core_get/put() ops to
power up/down a core when a widget is set up/freed.
Along with this, a few redundant functions are removed:
1. sof_pipeline_core_enable() is no longer needed as the
pipeline core will be set up when the pipeline widget
is set up
2. sof_core_enable() is replaced with snd_sof_core_get()
4. core_power_up/down() DSP ops are deprecated and replaced with
core get/put ops.
5. Core power down in sof_widget_unload() during topology
removal is also removed as it is not really needed. For dynamic
pipelines, the cores will be powered off when they are not used.
For static pipelines, the cores will be powered off in the device
remove callback.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119192621.4096077-10-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: hda: don't use the core op for power up/power down
The core_power_up/down() ops will be deprecated. Use the
HDA platform-specific functions for powering up/down
the cores during probe/suspend/remove. The enabled_cores_mask
and the core ref_count's are manually updated in each of
these functions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119192621.4096077-9-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: free widgets in sof_tear_down_pipelines() for static pipelines
Free widgets for static pipelines in sof_tear_down_pipelines().
But this feature is unavailable in older firmware with ABI < 3.19.
Just reset widget use_count's for this case. This would ensure that
the secondary cores enabled required for topology setup are powered
down properly before the primary core is powered off during
system suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119192621.4096077-8-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the function sof_load_pipeline_ipc() and directly
send the IPC instead. The pipeline core is already enabled
with the call to sof_pipeline_core_enable() in sof_widget_setup().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119192621.4096077-7-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: Intel: CNL/ICL/APL: set core_get/core_put ops
Set core_get/put ops for CNL/ICL platforms. These platforms
do not support enabling/disabling secondary cores
dynamically. So skip sending the IPC to power off the
cores in the core_put op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119192621.4096077-6-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Set core_get/put() ops for TGL. When core_get()
is requested for a core, its ref_count is incremented
and the PM_CORE_ENABLE IPC sent to the firmware to
power up the core if the current ref_count is 1.
Conversely, the ref_count is decremented in core_put()
and an IPC is sent to the DSP to power off the core
if the ref_count is 0.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119192621.4096077-5-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: Introduce num_cores and ref count per core
Add two fields num_cores and dsp_cores_ref_count to
struct snd_sof_dev. These will be used to maintain the
ref count for each core to determine when it should be
powered up or down.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119192621.4096077-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
We need to implement dsp_reset callback (1) that will actually reset
the DSP but keep it stalled.
In order to implement this we do the following:
-> put DSP into reset (assert CoreReset bit from PWRCTL)
-> stall the DSP using RunStall bit from AudioDSP_REG2 mix
-> take DSP out of reset (de-assert CoreReset bit from PWRCTL)
At this moment the DSP is taken out of reset and Stalled! This means
that we can load the firmware and then start the DSP (2).
Until now we resetted the DSP by turning down the Audiomix PD. This
doesn't work for Runtime PM if another IP is keeping Audiomix PD up.
By introducing dsp_reset() we no longer rely on turning off the
audiomix to reset the DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119094319.81674-6-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Daniel Baluta [Fri, 19 Nov 2021 09:43:18 +0000 (11:43 +0200)]
ASoC: SOF: imx8m: Implement DSP start
On i.MX8M DSP is controlled via a set of registers
from Audio MIX. This patches gets a reference (via regmap)
to Audio Mix registers and implements DSP start.
Daniel Baluta [Fri, 19 Nov 2021 09:43:17 +0000 (11:43 +0200)]
ASoC: SOF: imx8m: Add runtime PM / System PM support
We make use of common imx8m_suspend / imx8m_resume functions
for both system PM and runtime PM.
imx8m_suspend:
- frees the MU channels
- disables the clocks
imx8m_resume
- enables the clocks
- requests the MU channels
On i.MX8MP there is no dedicated functionality to put the DSP in reset.
The only way of doing this is to POWER DOWN the Audiomix domain.
We are able to do this because turning off the clocks and freeing the
channels makes the Audiomix to have no users thus PM kernel core turns
it down.
SOF core will not call system PM suspend handler if the DSP is already
down, but at resume it will call the system PM resume. So, we need to
keep track of the state via snd_sof_dsp_set_power_state
Few insights on how SOF core handles the PM:
- SOF core uses PM runtime autosuspend (with a timeout of 2 secs)
- at probe, SOF core boots the DSP and lets the PM runtime suspend to
turn it off, if there is no activity
- when someone opens the ALSA sound card (aplay/arecord, etc) ALSA core
calls PM runtime resume to turn on the DSP
- when the ALSA sound card is closed SOF core make use of PM subsystem
to call PM runtime suspend and thus turning off the DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211119094319.81674-4-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Daniel Baluta [Fri, 19 Nov 2021 09:43:16 +0000 (11:43 +0200)]
ASoC: SOF: imx8: Add runtime PM / System PM support
Handle clocks and mailbox channels at runtime suspend/resume
in order to save power.
DSP runtime PM uses a timeout of 2s. If device
is idle for 2s system will enter runtime suspend.
Because SOF state machine assumes that even if the DSP wasn't previously
active at a System resume, will re-load the firmware we need to make sure
that all needed resources are active.
Kernel core will take care of enabling the PD, we need to make sure that
we request the MU channels.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211119094319.81674-3-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Daniel Baluta [Fri, 19 Nov 2021 09:43:15 +0000 (11:43 +0200)]
ASoC: SOF: imx: Add code to manage DSP related clocks
We need at least 3 clocks in order to power up and access
DSP core registers found on i.MX8QM, i.MX8QXP and i.MX8MP
platforms.
Add code to request these clocks and enable them at probe. Next
patches will add PM support which will only activate clocks when
DSP is used.
DSP clocks are already documented in
Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
We choose to add:
* imx8_parse_clocks
* imx8_enable_clocks
* imx8_disable_clocks
wrappers because in the future DSP will need to take care about the
clocks of other related Audio IPs (e.g SAI, ESAI).
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211119094319.81674-2-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
YC Hung [Thu, 18 Nov 2021 10:07:44 +0000 (12:07 +0200)]
ASoC: SOF: topology: Add support for Mediatek AFE DAI
Add new sof dai and config to pass topology file configuration
to SOF firmware running on Mediatek platform DSP core.
Add mediatek audio front end(AFE) to the list of supported sof_dais
Signed-off-by: YC Hung <yc.hung@mediatek.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211118100749.54628-4-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
YC Hung [Thu, 18 Nov 2021 10:07:42 +0000 (12:07 +0200)]
ASoC: SOF: mediatek: Add mt8195 hardware support
This patch initialize to support SOF on Mediatek mt8195 platform.
MT8195 has four Cortex A78 cores paired with four Cortex A55 cores.
It also has Cadence HiFi-4 DSP single core. There are shared DRAM and
mailbox interrupt between AP and DSP to use for IPC communication.
Signed-off-by: YC Hung <yc.hung@mediatek.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211118100749.54628-2-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Wed, 17 Nov 2021 13:23:00 +0000 (13:23 +0000)]
firmware: cs_dsp: Allow creation of event controls
Some firmwares contain controls intended to convey firmware state back
to the host. Whilst more infrastructure will probably be needed for
these in time, as a first step allow creation of the controls, so said
firmwares arn't completely rejected.
Charles Keepax [Wed, 17 Nov 2021 13:22:57 +0000 (13:22 +0000)]
firmware: cs_dsp: Perform NULL check in cs_dsp_coeff_write/read_ctrl
Add a NULL check to the cs_dsp_coeff_write/read_ctrl functions. This is
a major convenience for users of the cs_dsp library as it allows the call
to cs_dsp_get_ctl to be inlined with the call to read/write the control
itself.
Charles Keepax [Wed, 17 Nov 2021 13:22:56 +0000 (13:22 +0000)]
firmware: cs_dsp: Add support for rev 2 coefficient files
Add support for the revision 2 coefficient file, this format is
identical to revision 1 and was simply added by accident to some
firmware. However unfortunately many firmwares have leaked into
production using this and as such driver support really needs to
be added for it.
Charles Keepax [Wed, 17 Nov 2021 13:22:55 +0000 (13:22 +0000)]
firmware: cs_dsp: Print messages from bin files
The coefficient file contains various info strings, and the equivalent
strings are printed from the WMFW file as it is loaded. Add support
for printing these from the coefficient file as well.
Charles Keepax [Wed, 17 Nov 2021 13:22:54 +0000 (13:22 +0000)]
firmware: cs_dsp: Add pre_run callback
The code already has a post_run callback, add a matching pre_run
callback to the client_ops that is called before execution is started.
This callback provides a convenient place for the client code to
set DSP controls or hardware that requires configuration before
the DSP core actually starts execution. Note that placing this callback
before cs_dsp_coeff_sync_controls is important to ensure that any
control values are then correctly synced out to the chip.
Co-authored-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211117132300.1290-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Wed, 17 Nov 2021 13:22:53 +0000 (13:22 +0000)]
firmware: cs_dsp: Add version checks on coefficient loading
The firmware coefficient files contain version information that is
currently ignored by the cs_dsp code. This information specifies which
version of the firmware the coefficient were generated for. Add a check
into the code which prints a warning in the case the coefficient and
firmware differ in version, in many cases this will be ok but it is not
always, so best to let the user know there is a potential issue.
Co-authored-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211117132300.1290-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Wed, 17 Nov 2021 13:22:52 +0000 (13:22 +0000)]
firmware: cs_dsp: Add lockdep asserts to interface functions
Some of the control functions exposed by the cs_dsp code require the
pwr_lock to be held by the caller. Add lockdep_assert_held calls to
ensure this is done correctly.
Charles Keepax [Wed, 17 Nov 2021 13:22:51 +0000 (13:22 +0000)]
ASoC: wm_adsp: Remove the wmfw_add_ctl helper function
The helper function wmfw_add_ctl is only called from one place and that
place is a function with only 2 lines of code. Merge the helper function
into the work function to simplify the code.
ASoC: SOF: amd: Add support for SOF firmware authentication
Add callback to notify PSP after loading firmware on DSP. PSP will
validate the loaded firmware and set qualifier bit to run firmware
on secured AMD systems.
Add new sof dais and config to pass topology file configuration
to SOF firmware running on ACP's DSP core. ACP firmware support
I2S_BT, I2S_SP and DMIC controller hence add three new dais to
the list of supported sof_dais
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-12-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: amd: acp-config: Remove legacy acpi based machine struct
We have moved legacy based machine struct into platform driver to
resolve module dependency with non-SOF ALSA build, hence removed
it from acp-config driver module.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-11-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI driver module to enable sof pci device support for Renoir.
If machine flag set to FLAG_SOF_ONLY_DMIC this pci driver register
platform device for non dsp based I2S platform device. If machine
flag is not enabled for SOF pci probe will return without invoking
sof device probe and registration
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-10-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: amd: Add module to determine ACP configuration
ACP hw block configuration differs across various distributions
and hence it's required to register different drivers module for
distributions. For now we support three ACP drivers:
* ACP without SOF use case
* ACP with SOF use case
* ACP with SOF use case for DMIC and non SOF for I2S endpoints
As all above driver registers with common PCI ID for ACP hw block
we need code to determine ACP configuration and auto select driver
module. This patch expose function that return configuration flag
based on dmi checks for a system. ACP driver module probe register
platform device based on such configuration flag to avoid conflict
with other ACP drivers probed for same PCI ID.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-8-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: amd: Add helper callbacks for ACP's DMA configuration
ACP DMA is used for loading SOF firmware into DSP memory and data
transfer from system memory to DSP memory. Add helper callbacks to
initialize and configure ACP DMA block for fw loading.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-3-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Olivier Moysan [Wed, 17 Nov 2021 11:00:31 +0000 (12:00 +0100)]
ASoC: stm32: sai: increase channels_max limit
The SAI peripheral supports up to 16 channels in TDM mode (8L+8R).
The driver currently supports TDM over two channels.
Increase SAI DAI playback/record channels_max,
to also allow up to 16 channels in TDM mode.
Peter Ujfalusi [Tue, 16 Nov 2021 15:21:37 +0000 (17:21 +0200)]
ASoC: SOF: debug: Add support for IPC message injection
In order to stress test the firmware's ability to handle (mis)crafted
IPC messages this patch adds a debugfs interface where a binary file
(message) can be written and the message is sent to the firmware as it is.
Read on the same file will return the reply from the firmware if it is
available as a binary.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211116152137.52129-5-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 16 Nov 2021 15:21:36 +0000 (17:21 +0200)]
ASoC: SOF: intel: Use the generic helper to get the reply
Make use of the generic snd_sof_ipc_process_reply() from the core instead
the local implementation.
snd_sof_ipc_process_reply() handles the reply retrieving and the ipc reply
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211116152137.52129-4-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 16 Nov 2021 15:21:35 +0000 (17:21 +0200)]
ASoC: SOF: imx: Use the generic helper to get the reply
Make use of the generic snd_sof_ipc_process_reply() from the core instead
the local implementation.
snd_sof_ipc_process_reply() handles the reply retrieving and the ipc reply
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211116152137.52129-3-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 16 Nov 2021 15:21:34 +0000 (17:21 +0200)]
ASoC: SOF: utils: Add generic function to get the reply for a tx message
The code to get the reply for a tx is identical in all but one place:
imx8_get_reply(), imx8m_get_reply(), atom_get_reply(), bdw_get_reply().
hda_dsp_ipc_get_reply() have additional check in place for PROBES and
special handling of PM messages.
Add a generic implementation to the core which can be used as drop in
replacement.
The reply size check is changed to be able to handle cases when the reply
size is not know beforehand (this is the case for PROBES and
DEBUG_MEM_USAGE for example).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211116152137.52129-2-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Now that struct cs42l42_private has pll_config, the current PLL
configuration can be looked up directly in pll_ratio_table. This
makes the pll_divout member of cs42l42_private redundant since it
was only a copy of the value from pll_ratio_table.
When reporting a jack unplug there's no need to make the reported
flags conditional on which flags were reported during the plug
event. It's perfectly safe to report all flags and buttons as
not-present and let the higher code filter for changes.
There's also no need to make two separate snd_soc_jack_report()
calls for presence flags and button flags. It can all be done in
one report.
ASoC: cs42l42: Remove redundant writes to DETECT_MODE
There are multiple places where DETECT_MODE is included in a register
write, but in every case it is written as 0. Removing these redundant
writes makes the code less cluttered and also makes it obvious that
DETECT_MODE is never changed.
A single initialization to 0 is added to cs42l42_setup_hs_type_detect().
Follow the Intel example and simplify the Kconfig
a) start from the end-product for 'select' chains
b) use 'depends on' to filter out configurations.
c) use snd-sof-of as a common module without any 'select'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211116124131.46414-1-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
David Heidelberg [Thu, 28 Oct 2021 12:46:38 +0000 (14:46 +0200)]
ASoC: wm8903: Convert txt bindings to yaml
Convert the Wolfson WM8903 Ultra-Low Power Stereo CODEC Device Tree
binding documentation to json-schema.
Signed-off-by: David Heidelberg <david@ixit.cz> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211028124639.38420-1-david@ixit.cz Signed-off-by: Mark Brown <broonie@kernel.org>
Maíra Canal [Sun, 24 Oct 2021 18:42:07 +0000 (15:42 -0300)]
ASoC: adau1701: Replace legacy gpio interface for gpiod
Considering the current transition of the GPIO subsystem, remove all
dependencies of the legacy GPIO interface (linux/gpio.h and linux
/of_gpio.h) and replace it with the descriptor-based GPIO approach.
Simon Trimmer [Mon, 15 Nov 2021 12:02:15 +0000 (12:02 +0000)]
firmware: cs_dsp: tidy includes in cs_dsp.c and cs_dsp.h
This patch removes unused included header files and moves others into
cs_dsp.h to ensure that types referenced in the header file are properly
described to prevent compiler warnings.
Mac Chiang [Tue, 9 Nov 2021 13:38:08 +0000 (08:38 -0500)]
ASoC: Intel: add sof-nau8825 machine driver
The machine driver is a generic machine driver for SOF with nau8825
codec w or w/o speaker additionally. Depending on the SOC
HDMI, DMIC, Bluetooth offload support are added dynamically.
Only add information related to SOF since the machine driver was
only tested with SOF.
There are currently 4 i2s machine variants of ADL.
This supports the headphone NUA8825(SSP0) alone or with smart or dumb
speakers.
Board 2,3,4 use SSP2 for Bluetooth offload support except board 1.
Signed-off-by: David Lin <CTLIN0@nuvoton.com> Co-developed-by: Mac Chiang <mac.chiang@intel.com> Signed-off-by: Mac Chiang <mac.chiang@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211109133808.8729-1-mac.chiang@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: dt-bindings: cs42l42: Convert binding to yaml
Replace the old .txt binding with a new schema binding.
At the same time, some of the descriptions are updated to make them
clearer, fix errors, or just make them fit better into the style
of schema binding.
The cirrus,hs-bias-ramp-rate property was missing from the old .txt
binding and has been added to the yaml.
Mark Brown [Mon, 15 Nov 2021 19:23:56 +0000 (19:23 +0000)]
Merge series "ASoC: Intel: sof_sdw: Use fixed DAI link id" from Bard Liao <yung-chuan.liao@linux.intel.com>:
This series provides a way to use constant dailink numbers for different
devices. So that we don't need to renumber them in topologies.
Some patches with different purpose are sent together in this series
since they are dependent.
Bard Liao (8):
ASoC: intel: sof_sdw: return the original error number
ASoC: intel: sof_sdw: rename be_index/link_id to link_index
ASoC: intel: sof_sdw: Use a fixed DAI link id for AMP
ASoC: intel: sof_sdw: move DMIC link id overwrite to
create_sdw_dailink
ASoC: intel: sof_sdw: remove SOF_RT715_DAI_ID_FIX quirk
ASoC: intel: sof_sdw: remove sof_sdw_mic_codec_mockup_init
ASoC: intel: sof_sdw: remove get_next_be_id
ASoC: intel: sof_sdw: add link adr order check
Pierre-Louis Bossart (2):
ASoC: Intel: sof_sdw: fix jack detection on HP Spectre x360
convertible
ASoC: Intel: sof_sdw: add SKU for Dell Latitude 9520
Mark Brown [Mon, 15 Nov 2021 19:23:54 +0000 (19:23 +0000)]
Merge series "Add tfa9897 rcv-gpios support" from Vincent Knecht <vincent.knecht@mailoo.org>:
This is the continuation of a previous series [1] where
- patch 1/4 is removed in favor of using pin switch
This will be posted independently of tfa989x support,
since it mainly require changes to sound/soc/qcom/common.c
and device DTS.
- patch 2/4 is already merged
so here are reworked patch 3/4 (bindings fixed and example added)
and patch 4/4 unchanged.
Bard Liao [Wed, 27 Oct 2021 02:18:24 +0000 (10:18 +0800)]
ASoC: intel: sof_sdw: add link adr order check
We assume the adr order described in a snd_soc_acpi_link_adr array is
jack -> amp -> mic. We follow the same order to implement the topology.
We will need a special topology if we configure a snd_soc_acpi_link_adr
array with different order. Adding a check and a warning message can
remind people to keep the order when adding a new snd_soc_acpi_link_adr
array.
Bard Liao [Wed, 27 Oct 2021 02:18:23 +0000 (10:18 +0800)]
ASoC: intel: sof_sdw: remove get_next_be_id
DAI link id will not be set from sdw codec init feedback function,
and be_id is changed by create_sdw_dailink() now. So we don't need
get_next_be_id() anymore.
projects / mirror_ubuntu-kernels.git / log