Ben Hutchings [Thu, 14 Nov 2013 01:19:29 +0000 (01:19 +0000)]
net_tstamp: Add SIOCGHWTSTAMP ioctl to match SIOCSHWTSTAMP
SIOCSHWTSTAMP returns the real configuration to the application
using it, but there is currently no way for any other
application to find out the configuration non-destructively.
Add a new ioctl for this, making it unprivileged.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Ben Hutchings [Mon, 18 Nov 2013 17:04:58 +0000 (17:04 +0000)]
net/compat: Fix minor information leak in siocdevprivate_ioctl()
We don't need to check that ifr_data itself is a valid user pointer,
but we should check &ifr_data is. Thankfully the copy of ifr_name is
checked, so this can only leak a few bytes from immediately above the
user address limit.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Ben Hutchings [Thu, 14 Nov 2013 01:05:58 +0000 (01:05 +0000)]
net_tstamp: Improve kernel-doc for struct hwtstamp_config
Fix the name of the rx_filter field.
Remove text about 32/64-bit compatibility; this works just the same as
for most socket ioctls and as the structure is not allowed to grow
there is no need to remind anyone how to maintain it.
Add explanation about drivers changing the filter mode.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
David S. Miller [Sat, 16 Nov 2013 02:11:16 +0000 (21:11 -0500)]
net: Handle CHECKSUM_COMPLETE more adequately in pskb_trim_rcsum().
Currently pskb_trim_rcsum() just balks on CHECKSUM_COMPLETE packets
and remarks them as CHECKSUM_NONE, forcing a software checksum
validation later.
We have all of the mechanics available to fixup the skb->csum value,
even for complicated fragmented packets, via the helpers
skb_checksum() and csum_sub().
So just use them.
Based upon a suggestion by Herbert Xu.
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 15 Nov 2013 16:58:14 +0000 (08:58 -0800)]
pkt_sched: fq: fix pacing for small frames
For performance reasons, sch_fq tried hard to not setup timers for every
sent packet, using a quantum based heuristic : A delay is setup only if
the flow exhausted its credit.
Problem is that application limited flows can refill their credit
for every queued packet, and they can evade pacing.
This problem can also be triggered when TCP flows use small MSS values,
as TSO auto sizing builds packets that are smaller than the default fq
quantum (3028 bytes)
This patch adds a 40 ms delay to guard flow credit refill.
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 15 Nov 2013 13:19:08 +0000 (14:19 +0100)]
genetlink: unify registration functions
Now that the ops assignment is just two variables rather than a
long list iteration etc., there's no reason to separately export
__genl_register_family() and __genl_register_family_with_ops().
Unify the two functions into __genl_register_family() and make
genl_register_family_with_ops() call it after assigning the ops.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Mack [Fri, 15 Nov 2013 07:29:16 +0000 (08:29 +0100)]
net: ethernet: ti/cpsw: do not crash on single-MAC machines during resume
During resume, use for_each_slave to walk the slaves of the cpsw, and
soft-reset each of them. This prevents oopses if there is only one
slave configured.
Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Nov 2013 22:55:58 +0000 (17:55 -0500)]
Merge branch 'macvlan'
Michal Kubecek says:
====================
macvlan: disable LRO on lowerdev instead of a macvlan
A customer of ours encountered a problem with LRO on an ixgbe network
card. Analysis showed that it was a known conflict of forwarding and LRO
but the forwarding was enabled in an LXC container where only a macvlan
was, not the ethernet device itself.
I believe the solution is exactly the same as what we do for "normal"
(802.1q) VLAN devices: if dev_disable_lro() is called for such device,
LRO is disabled on the underlying "real" device instead.
v2: adapt to changes merged from net-next
v3: use BUG() in macvlan_dev_real_dev() if compiled without macvlan
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Fri, 15 Nov 2013 05:18:50 +0000 (06:18 +0100)]
macvlan: disable LRO on lower device instead of macvlan
A macvlan device has always LRO disabled so that calling
dev_disable_lro() on it does nothing. If we need to disable LRO
e.g. because
- the macvlan device is inserted into a bridge
- IPv6 forwarding is enabled for it
- it is in a different namespace than lowerdev and IPv4
forwarding is enabled in it
we need to disable LRO on its underlying device instead (as we
do for 802.1q VLAN devices).
v2: use newly introduced netif_is_macvlan()
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Fri, 15 Nov 2013 05:18:40 +0000 (06:18 +0100)]
macvlan: introduce macvlan_dev_real_dev() helper function
Introduce helper function macvlan_dev_real_dev which returns the
underlying device of a macvlan device, similar to vlan_dev_real_dev()
for 802.1q VLAN devices.
v2: IFF_MACVLAN flag and equivalent of is_macvlan_dev() were
introduced in the meantime
v3: do BUG() if compiled without macvlan support
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
the wrong ip address will transfor to 245.245.245.244 and add
to the ip target success, it is uncorrect, so I add checks to avoid
adding wrong address.
The in4_pton() will set wrong ip address to 0.0.0.0, it will return by
the next check and will not add to ip target.
v2
According Veaceslav's opinion, simplify the code.
v3
According Veaceslav's opinion, add broadcast check and make a micro
definition to package it.
v4
Solve the problem of the format which David point out.
Suggested-by: Veaceslav Falico <vfalico@redhat.com> Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Erik Hugne [Wed, 13 Nov 2013 08:35:11 +0000 (09:35 +0100)]
tipc: fix dereference before check warning
This fixes the following Smatch warning:
net/tipc/link.c:2364 tipc_link_recv_fragment()
warn: variable dereferenced before check '*head' (see line 2361)
A null pointer might be passed to skb_try_coalesce if
a malicious sender injects orphan fragments on a link.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 14 Nov 2013 21:37:54 +0000 (13:37 -0800)]
ipv4: fix possible seqlock deadlock
ip4_datagram_connect() being called from process context,
it should use IP_INC_STATS() instead of IP_INC_STATS_BH()
otherwise we can deadlock on 32bit arches, or get corruptions of
SNMP counters.
Fixes: 584bdf8cbdf6 ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Please pull this batch of fixes intended for the 3.13 stream!
Amitkumar Karwar offers a quartet of mwifiex fixes, including an
endian fix and three fixes for invalid memory access.
Avinash Patil trims the packet length value for packets received from
an SDIO interface.
Colin Ian King fixes a NULL pointer dereference in the rtlwifi
efuse code.
Dan Carpenter cleans-up an mwifiex integer underflow, a potential
libertas oops, a memory corrupion bug in wcn36xx, and a locking issue
also in wcn36xx.
Dan Williams helps prism54 devices to avoid being misclassified as
Ethernet devices.
Felipe Pena fixes a couple of typo errors, one in rt2x00 and the
other in rtlwifi.
Janusz Dziedzic corrects a pair of DFS-related problems in ath9k.
Larry Finger patches three rtlwifi drivers to correctly report signal
strength even for an unassociated AP.
Mark Cave-Ayland rewrites some endian-illiterate packet type extraction
code in rtlwifi.
Stanislaw Gruszka addresses an rt2x00 regression related to setting
HT station WCID and AMPDU density parameters.
Sujith Manoharan corrects the initvals settings for AR9485.
Ujjal Roy patches an obscure bit of code in mwifiex that was using
the wrong definition of eth_hdr when briding patches in AP mode.
Wei Yongjun fixes a couple of bugs: one is a return code handling
bug in libertas; and, the other is a locking issue in wcn36xx.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Dalton [Thu, 14 Nov 2013 18:41:04 +0000 (10:41 -0800)]
virtio-net: mergeable buffer size should include virtio-net header
Commit 2613af0ed18a ("virtio_net: migrate mergeable rx buffers to page
frag allocators") changed the mergeable receive buffer size from PAGE_SIZE
to MTU-size. However, the merge buffer size does not take into account the
size of the virtio-net header. Consequently, packets that are MTU-size
will take two buffers intead of one (to store the virtio-net header),
substantially decreasing the throughput of MTU-size traffic due to TCP
window / SKB truesize effects.
This commit changes the mergeable buffer size to include the virtio-net
header. The buffer size is cacheline-aligned because skb_page_frag_refill
will not automatically align the requested size.
Benchmarks taken from an average of 5 netperf 30-second TCP_STREAM runs
between two QEMU VMs on a single physical machine. Each VM has two VCPUs and
vhost enabled. All VMs and vhost threads run in a single 4 CPU cgroup
cpuset, using cgroups to ensure that other processes in the system will not
be scheduled on the benchmark CPUs. Transmit offloads and mergeable receive
buffers are enabled, but guest_tso4 / guest_csum are explicitly disabled to
force MTU-sized packets on the receiver.
next-net trunk before 2613af0ed18a (PAGE_SIZE buf): 3861.08Gb/s
net-next trunk (MTU 1500- packet uses two buf due to size bug): 4076.62Gb/s
net-next trunk (MTU 1480- packet fits in one buf): 6301.34Gb/s
net-next trunk w/ size fix (MTU 1500 - packet fits in one buf): 6445.44Gb/s
Suggested-by: Eric Northup <digitaleric@google.com> Signed-off-by: Michael Dalton <mwdalton@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Metcalf [Thu, 14 Nov 2013 17:09:21 +0000 (12:09 -0500)]
connector: improved unaligned access error fix
In af3e095a1fb4, Erik Jacobsen fixed one type of unaligned access
bug for ia64 by converting a 64-bit write to use put_unaligned().
Unfortunately, since gcc will convert a short memset() to a series
of appropriately-aligned stores, the problem is now visible again
on tilegx, where the memset that zeros out proc_event is converted
to three 64-bit stores, causing an unaligned access panic.
A better fix for the original problem is to ensure that proc_event
is aligned to 8 bytes here. We can do that relatively easily by
arranging to start the struct cn_msg aligned to 8 bytes and then
offset by 4 bytes. Doing so means that the immediately following
proc_event structure is then correctly aligned to 8 bytes.
The result is that the memset() stores are now aligned, and as an
added benefit, we can remove the put_unaligned() calls in the code.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
pkt_sched: fq: change classification of control packets
Initial sch_fq implementation copied code from pfifo_fast to classify
a packet as a high prio packet.
This clashes with setups using PRIO with say 7 bands, as one of the
band could be incorrectly (mis)classified by FQ.
Packets would be queued in the 'internal' queue, and no pacing ever
happen for this special queue.
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hahnjo [Tue, 12 Nov 2013 17:19:24 +0000 (18:19 +0100)]
alx: Reset phy speed after resume
This fixes bug 62491 (https://bugzilla.kernel.org/show_bug.cgi?id=62491).
After resuming some users got the following error flooding the kernel log:
alx 0000:02:00.0: invalid PHY speed/duplex: 0xffff
Signed-off-by: Jonas Hahnfeld <linux@hahnjo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 14 Nov 2013 22:11:17 +0000 (17:11 -0500)]
Merge branch 'genetlink'
Johannes Berg says:
====================
genetlink: reduce ops size and complexity (v2)
As before - reduce the complexity and data/code size of genetlink ops
by making them an array rather than a linked list. Most users already
use an array thanks to genl_register_family_with_ops(), so convert the
remaining ones allowing us to get rid of the list head in each op.
Also make them const, this just makes sense at that point and the security
people like making function pointers const as well :-)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Thu, 14 Nov 2013 16:14:44 +0000 (17:14 +0100)]
genetlink: register family ops as array
Instead of using a linked list, use an array. This reduces
the data size needed by the users of genetlink, for example
in wireless (net/wireless/nl80211.c) on 64-bit it frees up
over 1K of data space.
Remove the attempted sending of CTRL_CMD_NEWOPS ctrl event
since genl_ctrl_event(CTRL_CMD_NEWOPS, ...) only returns
-EINVAL anyway, therefore no such event could ever be sent.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 14 Nov 2013 14:47:03 +0000 (15:47 +0100)]
ip6tnl: fix use after free of fb_tnl_dev
Bug has been introduced by commit bb8140947a24 ("ip6tnl: allow to use rtnl ops
on fb tunnel").
When ip6_tunnel.ko is unloaded, FB device is delete by rtnl_link_unregister()
and then we try to use the pointer in ip6_tnl_destroy_tunnels().
Let's add an handler for dellink, which will never remove the FB tunnel. With
this patch it will no more be possible to remove it via 'ip link del ip6tnl0',
but it's safer.
The same fix was already proposed by Willem de Bruijn <willemb@google.com> for
sit interfaces.
CC: Willem de Bruijn <willemb@google.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 14 Nov 2013 12:51:06 +0000 (13:51 +0100)]
sit: link local routes are missing
When a link local address was added to a sit interface, the corresponding route
was not configured. This breaks routing protocols that use the link local
address, like OSPFv3.
To ease the code reading, I remove sit_route_add(), which only adds v4 mapped
routes, and add this kind of route directly in sit_add_v4_addrs(). Thus link
local and v4 mapped routes are configured in the same place.
Reported-by: Li Hongjun <hongjun.li@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 14 Nov 2013 12:51:05 +0000 (13:51 +0100)]
sit: fix prefix length of ll and v4mapped addresses
When the local IPv4 endpoint is wilcard (0.0.0.0), the prefix length is
correctly set, ie 64 if the address is a link local one or 96 if the address is
a v4 mapped one.
But when the local endpoint is specified, the prefix length is set to 128 for
both kind of address. This patch fix this wrong prefix length.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 14 Nov 2013 02:27:38 +0000 (21:27 -0500)]
sit: fix use after free of fb_tunnel_dev
Bug: The fallback device is created in sit_init_net and assumed to be
freed in sit_exit_net. First, it is dereferenced in that function, in
sit_destroy_tunnels:
struct net *net = dev_net(sitn->fb_tunnel_dev);
Prior to this, rtnl_unlink_register has removed all devices that match
rtnl_link_ops == sit_link_ops.
which cases the fallback device to match here and be freed before it
is last dereferenced.
Fix: This commit adds an explicit .delllink callback to sit_link_ops
that skips deallocation at rtnl_unlink_register for the fallback
device. This mechanism is comparable to the one in ip_tunnel.
It also modifies sit_destroy_tunnels and its only caller sit_exit_net
to avoid the offending dereference in the first place. That double
lookup is more complicated than required.
Test: The bug is only triggered when CONFIG_NET_NS is enabled. It
causes a GPF only when CONFIG_DEBUG_SLAB is enabled. Verified that
this bug exists at the mentioned commit, at davem-net HEAD and at
3.11.y HEAD. Verified that it went away after applying this patch.
Fixes: 205983c43700 ("sit: allow to use rtnl ops on fb tunnel") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net:fec: fix WARNING caused by lack of calls to dma_mapping_error()
The driver fails to check the results of DMA mapping and results in
the following warning: (with kernel config "CONFIG_DMA_API_DEBUG" enable)
------------[ cut here ]------------
WARNING: at lib/dma-debug.c:937 check_unmap+0x43c/0x7d8()
fec 2188000.ethernet: DMA-API: device driver failed to check map
error[device address=0x00000000383a8040] [size=2048 bytes] [mapped as single]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.17-16827-g9cdb0ba-dirty #188
[<80013c4c>] (unwind_backtrace+0x0/0xf8) from [<80011704>] (show_stack+0x10/0x14)
[<80011704>] (show_stack+0x10/0x14) from [<80025614>] (warn_slowpath_common+0x4c/0x6c)
[<80025614>] (warn_slowpath_common+0x4c/0x6c) from [<800256c8>] (warn_slowpath_fmt+0x30/0x40)
[<800256c8>] (warn_slowpath_fmt+0x30/0x40) from [<8026bfdc>] (check_unmap+0x43c/0x7d8)
[<8026bfdc>] (check_unmap+0x43c/0x7d8) from [<8026c584>] (debug_dma_unmap_page+0x6c/0x78)
[<8026c584>] (debug_dma_unmap_page+0x6c/0x78) from [<8038049c>] (fec_enet_rx_napi+0x254/0x8a8)
[<8038049c>] (fec_enet_rx_napi+0x254/0x8a8) from [<804dc8c0>] (net_rx_action+0x94/0x160)
[<804dc8c0>] (net_rx_action+0x94/0x160) from [<8002c758>] (__do_softirq+0xe8/0x1d0)
[<8002c758>] (__do_softirq+0xe8/0x1d0) from [<8002c8e8>] (do_softirq+0x4c/0x58)
[<8002c8e8>] (do_softirq+0x4c/0x58) from [<8002cb50>] (irq_exit+0x90/0xc8)
[<8002cb50>] (irq_exit+0x90/0xc8) from [<8000ea88>] (handle_IRQ+0x3c/0x94)
[<8000ea88>] (handle_IRQ+0x3c/0x94) from [<8000855c>] (gic_handle_irq+0x28/0x5c)
[<8000855c>] (gic_handle_irq+0x28/0x5c) from [<8000de00>] (__irq_svc+0x40/0x50)
Exception stack(0x815a5f38 to 0x815a5f80)
5f20: 815a5f803b9aca00
5f40: 0fe52383000000020dd8950e0000000281e7b0800000000000000000815ac4d8
5f60: 806032ec0000000000000017815a5f80800590288041fc4c60000013ffffffff
[<8000de00>] (__irq_svc+0x40/0x50) from [<8041fc4c>] (cpuidle_enter_state+0x50/0xf0)
[<8041fc4c>] (cpuidle_enter_state+0x50/0xf0) from [<8041fd94>] (cpuidle_idle_call+0xa8/0x14c)
[<8041fd94>] (cpuidle_idle_call+0xa8/0x14c) from [<8000edac>] (arch_cpu_idle+0x10/0x4c)
[<8000edac>] (arch_cpu_idle+0x10/0x4c) from [<800582f8>] (cpu_startup_entry+0x60/0x130)
[<800582f8>] (cpu_startup_entry+0x60/0x130) from [<80bc7a48>] (start_kernel+0x2d0/0x328)
[<80bc7a48>] (start_kernel+0x2d0/0x328) from [<10008074>] (0x10008074)
---[ end trace c6edec32436e0042 ]---
Because dma-debug add new interfaces to debug dma mapping errors, pls refer
to: http://lwn.net/Articles/516640/
After dma mapping, it must call dma_mapping_error() to check mapping error,
otherwise the map_err_type alway is MAP_ERR_NOT_CHECKED, check_unmap() define
the mapping is not checked and dump the error msg. So,add dma_mapping_error()
checking to fix the WARNING
And RX DMA buffers are used repeatedly and the driver copies it into an skb,
fec_enet_rx() should not map or unmap, use dma_sync_single_for_cpu()/dma_sync_single_for_device()
instead of dma_map_single()/dma_unmap_single().
There have another potential issue: fec_enet_rx() passes the DMA address to __va().
Physical and DMA addresses are *not* the same thing. They may differ if the device
is behind an IOMMU or bounce buffering was required, or just because there is a fixed
offset between the device and host physical addresses. Also fix it in this patch.
=============================================
V2: add net_ratelimit() to limit map err message.
use dma_sync_single_for_cpu() instead of dma_map_single().
fix the issue that pass DMA addresses to __va() to get virture address.
V1: initial send
=============================================
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chang Xiangzhong [Wed, 13 Nov 2013 23:58:26 +0000 (00:58 +0100)]
net: sctp: bug-fixing: retran_path not set properly after transports recovering (v3)
When a transport recovers due to the new coming sack, SCTP should
iterate all of its transport_list to locate the __two__ most recently used
transport and set to active_path and retran_path respectively. The exising
code does not find the two properly - In case of the following list:
[most-recent] -> [2nd-most-recent] -> ...
Both active_path and retran_path would be set to the 1st element.
The bug happens when:
1) multi-homing
2) failure/partial_failure transport recovers
Both active_path and retran_path would be set to the same most-recent one, in
other words, retran_path would not take its role - an end user might not even
notice this issue.
Signed-off-by: Chang Xiangzhong <changxiangzhong@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 13 Nov 2013 23:00:46 +0000 (15:00 -0800)]
net-tcp: fix panic in tcp_fastopen_cache_set()
We had some reports of crashes using TCP fastopen, and Dave Jones
gave a nice stack trace pointing to the error.
Issue is that tcp_get_metrics() should not be called with a NULL dst
Fixes: 1fe4c481ba637 ("net-tcp: Fast Open client - cookie cache") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dave Jones <davej@redhat.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Tested-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: fix two race conditions in bond_store_updelay/downdelay
This patch fixes two race conditions between bond_store_updelay/downdelay
and bond_store_miimon which could lead to division by zero as miimon can
be set to 0 while either updelay/downdelay are being set and thus miss the
zero check in the beginning, the zero div happens because updelay/downdelay
are stored as new_value / bond->params.miimon. Use rtnl to synchronize with
miimon setting.
CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 13 Nov 2013 14:32:54 +0000 (06:32 -0800)]
tcp: tsq: restore minimal amount of queueing
After commit c9eeec26e32e ("tcp: TSQ can use a dynamic limit"), several
users reported throughput regressions, notably on mvneta and wifi
adapters.
802.11 AMPDU requires a fair amount of queueing to be effective.
This patch partially reverts the change done in tcp_write_xmit()
so that the minimal amount is sysctl_tcp_limit_output_bytes.
It also remove the use of this sysctl while building skb stored
in write queue, as TSO autosizing does the right thing anyway.
Users with well behaving NICS and correct qdisc (like sch_fq),
can then lower the default sysctl_tcp_limit_output_bytes value from
128KB to 8KB.
This new usage of sysctl_tcp_limit_output_bytes permits each driver
authors to check how their driver performs when/if the value is set
to a minimum of 4KB.
Normally, line rate for a single TCP flow should be possible,
but some drivers rely on timers to perform TX completion and
too long TX completion delays prevent reaching full throughput.
Fixes: c9eeec26e32e ("tcp: TSQ can use a dynamic limit") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Sujith Manoharan <sujith@msujith.org> Reported-by: Arnaud Ebalard <arno@natisbad.org> Tested-by: Sujith Manoharan <sujith@msujith.org> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 14 Nov 2013 00:48:56 +0000 (00:48 +0000)]
ixp4xx_eth: Validate hwtstamp_config completely before applying it
hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes. Currently it sets the TX configuration
before validating the rx_filter field.
Untested as I don't have a cross-compiler to hand.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 14 Nov 2013 00:47:36 +0000 (00:47 +0000)]
ti_cpsw: Validate hwtstamp_config completely before applying it
cpsw_hwtstamp_ioctl() should validate all fields of hwtstamp_config,
and the hardware version, before making any changes. Currently it
sets the TX configuration before validating the rx_filter field
or that the hardware supports timestamping.
Also correct the error code for hardware versions that don't
support timestamping. ENOTSUPP is used by the NFS implementation
and is not part of userland API; we want EOPNOTSUPP (which glibc
also calls ENOTSUP, with one 'P').
Untested as I don't have a cross-compiler to hand.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Mugunthan V N <mugunthanvnm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 14 Nov 2013 00:43:41 +0000 (00:43 +0000)]
stmmac: Validate hwtstamp_config completely before applying it
stmmac_hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes. Currently it sets the TX configuration
before validating the rx_filter field.
Compile-tested only.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 14 Nov 2013 00:42:50 +0000 (00:42 +0000)]
pch_gbe: Validate hwtstamp_config completely before applying it
hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes. Currently it sets the TX configuration
before validating the rx_filter field.
Compile-tested only.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 14 Nov 2013 00:41:38 +0000 (00:41 +0000)]
e1000e: Validate hwtstamp_config completely before applying it
e1000e_hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes. Currently it copies the configuration to
the e1000_adapter structure before validating it at all.
Change e1000e_config_hwtstamp() to take a pointer to the
hwstamp_config and to copy the config after validating it.
Compile-tested only.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 14 Nov 2013 00:40:56 +0000 (00:40 +0000)]
tg3: Validate hwtstamp_config completely before applying it
tg3_hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes. Currently it sets the TX configuration
before validating the rx_filter field.
Compile-tested only.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Wed, 13 Nov 2013 08:26:14 +0000 (17:26 +0900)]
bridge: Fix memory leak when deleting bridge with vlan filtering enabled
We currently don't call br_vlan_flush() when deleting a bridge, which
leads to memory leak if br->vlan_info is allocated.
Steps to reproduce:
while :
do
brctl addbr br0
bridge vlan add dev br0 vid 10 self
brctl delbr br0
done
We can observe the cache size of corresponding slab entry
(as kmalloc-2048 in SLUB) is increased.
Toshiaki Makita [Wed, 13 Nov 2013 08:26:12 +0000 (17:26 +0900)]
bridge: Use vlan_vid_[add/del] instead of direct ndo_vlan_rx_[add/kill]_vid calls
We should use wrapper functions vlan_vid_[add/del] instead of
ndo_vlan_rx_[add/kill]_vid. Otherwise, we might be not able to communicate
using vlan interface in a certain situation.
Example of problematic case:
vconfig add eth0 10
brctl addif br0 eth0
bridge vlan add dev eth0 vid 10
bridge vlan del dev eth0 vid 10
brctl delif br0 eth0
In this case, we cannot communicate via eth0.10 because vlan 10 is
filtered by NIC that has the vlan filtering feature.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 12 Nov 2013 22:45:42 +0000 (23:45 +0100)]
random32: use msecs_to_jiffies for reseed timer
Use msecs_to_jiffies, for these calculations as different HZ
considerations are taken into account for conversion of the timer
shot, and also it makes the code more readable.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 12 Nov 2013 22:45:41 +0000 (23:45 +0100)]
random32: add __init prefix to prandom_start_seed_timer
We only call that in functions annotated with __init, so add __init
prefix in prandom_start_seed_timer() as well, so that the kernel can
make use of this hint and we can possibly free up resources after it's
usage. And since it's an internal function rename it to
__prandom_start_seed_timer().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 13 Nov 2013 06:00:40 +0000 (14:00 +0800)]
macvtap: limit head length of skb allocated
We currently use hdr_len as a hint of head length which is advertised by
guest. But when guest advertise a very big value, it can lead to an 64K+
allocating of kmalloc() which has a very high possibility of failure when host
memory is fragmented or under heavy stress. The huge hdr_len also reduce the
effect of zerocopy or even disable if a gso skb is linearized in guest.
To solves those issues, this patch introduces an upper limit (PAGE_SIZE) of the
head, which guarantees an order 0 allocation each time.
Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 13 Nov 2013 06:00:39 +0000 (14:00 +0800)]
tuntap: limit head length of skb allocated
We currently use hdr_len as a hint of head length which is advertised by
guest. But when guest advertise a very big value, it can lead to an 64K+
allocating of kmalloc() which has a very high possibility of failure when host
memory is fragmented or under heavy stress. The huge hdr_len also reduce the
effect of zerocopy or even disable if a gso skb is linearized in guest.
To solves those issues, this patch introduces an upper limit (PAGE_SIZE) of the
head, which guarantees an order 0 allocation each time.
Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 13 Nov 2013 07:52:47 +0000 (10:52 +0300)]
net: mv643xx_eth: potential NULL dereference in probe()
We assume that "mp->phy" can be NULL a couple lines before the
dereference.
Fixes: 1cce16d37d0f ('net: mv643xx_eth: Add missing phy_addr_set in DT mode') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 13 Nov 2013 07:42:34 +0000 (10:42 +0300)]
net: cdc_ncm: cleanup a type issue in cdc_ncm_setup()
This is harmless but cdc_ncm_setup() returns negative error codes
truncated to u8 values. There is only one caller and treats all
non-zero returns as errors but doesn't store the the return code. So
the code works correctly but it's messy and upsets the static checkers.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
commit 06a23fe31ca3
("core/dev: set pkt_type after eth_type_trans() in dev_forward_skb()")
and refactoring 64261f230a91
("dev: move skb_scrub_packet() after eth_type_trans()")
are forcing pkt_type to be PACKET_HOST when skb traverses veth.
which means that ip forwarding will kick in inside netns
even if skb->eth->h_dest != dev->dev_addr
Fix order of eth_type_trans() and skb_scrub_packet() in dev_forward_skb()
and in ip_tunnel_rcv()
Fixes: 06a23fe31ca3 ("core/dev: set pkt_type after eth_type_trans() in dev_forward_skb()") CC: Isaku Yamahata <yamahatanetdev@gmail.com> CC: Maciej Zenczykowski <zenczykowski@gmail.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Tue, 12 Nov 2013 15:34:41 +0000 (16:34 +0100)]
usbnet: fix status interrupt urb handling
Since commit 7b0c5f21f348a66de495868b8df0284e8dfd6bbf
"sierra_net: keep status interrupt URB active", sierra_net triggers
status interrupt polling before the net_device is opened (in order to
properly receive the sync message response).
To be able to receive further interrupts, the interrupt urb needs to be
re-submitted, so this patch removes the bogus check for netif_running().
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Veaceslav Falico [Tue, 12 Nov 2013 14:37:40 +0000 (15:37 +0100)]
bonding: don't permit to use ARP monitoring in 802.3ad mode
Currently the ARP monitoring is not supported with 802.3ad, and it's
prohibited to use it via the module params.
However we still can set it afterwards via sysfs, cause we only check for
*LB modes there.
To fix this - add a check for 802.3ad mode in bonding_store_arp_interval.
CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) The addition of nftables. No longer will we need protocol aware
firewall filtering modules, it can all live in userspace.
At the core of nftables is a, for lack of a better term, virtual
machine that executes byte codes to inspect packet or metadata
(arriving interface index, etc.) and make verdict decisions.
Besides support for loading packet contents and comparing them, the
interpreter supports lookups in various datastructures as
fundamental operations. For example sets are supports, and
therefore one could create a set of whitelist IP address entries
which have ACCEPT verdicts attached to them, and use the appropriate
byte codes to do such lookups.
Since the interpreted code is composed in userspace, userspace can
do things like optimize things before giving it to the kernel.
Another major improvement is the capability of atomically updating
portions of the ruleset. In the existing netfilter implementation,
one has to update the entire rule set in order to make a change and
this is very expensive.
Userspace tools exist to create nftables rules using existing
netfilter rule sets, but both kernel implementations will need to
co-exist for quite some time as we transition from the old to the
new stuff.
Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have
worked so hard on this.
2) Daniel Borkmann and Hannes Frederic Sowa made several improvements
to our pseudo-random number generator, mostly used for things like
UDP port randomization and netfitler, amongst other things.
In particular the taus88 generater is updated to taus113, and test
cases are added.
3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet
and Yang Yingliang.
4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin
Sujir.
5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet,
Neal Cardwell, and Yuchung Cheng.
6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary
control message data, much like other socket option attributes.
From Francesco Fusco.
7) Allow applications to specify a cap on the rate computed
automatically by the kernel for pacing flows, via a new
SO_MAX_PACING_RATE socket option. From Eric Dumazet.
8) Make the initial autotuned send buffer sizing in TCP more closely
reflect actual needs, from Eric Dumazet.
9) Currently early socket demux only happens for TCP sockets, but we
can do it for connected UDP sockets too. Implementation from Shawn
Bohrer.
10) Refactor inet socket demux with the goal of improving hash demux
performance for listening sockets. With the main goals being able
to use RCU lookups on even request sockets, and eliminating the
listening lock contention. From Eric Dumazet.
11) The bonding layer has many demuxes in it's fast path, and an RCU
conversion was started back in 3.11, several changes here extend the
RCU usage to even more locations. From Ding Tianhong and Wang
Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav
Falico.
12) Allow stackability of segmentation offloads to, in particular, allow
segmentation offloading over tunnels. From Eric Dumazet.
13) Significantly improve the handling of secret keys we input into the
various hash functions in the inet hashtables, TCP fast open, as
well as syncookies. From Hannes Frederic Sowa. The key fundamental
operation is "net_get_random_once()" which uses static keys.
Hannes even extended this to ipv4/ipv6 fragmentation handling and
our generic flow dissector.
14) The generic driver layer takes care now to set the driver data to
NULL on device removal, so it's no longer necessary for drivers to
explicitly set it to NULL any more. Many drivers have been cleaned
up in this way, from Jingoo Han.
15) Add a BPF based packet scheduler classifier, from Daniel Borkmann.
16) Improve CRC32 interfaces and generic SKB checksum iterators so that
SCTP's checksumming can more cleanly be handled. Also from Daniel
Borkmann.
17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces
using the interface MTU value. This helps avoid PMTU attacks,
particularly on DNS servers. From Hannes Frederic Sowa.
18) Use generic XPS for transmit queue steering rather than internal
(re-)implementation in virtio-net. From Jason Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
random32: add test cases for taus113 implementation
random32: upgrade taus88 generator to taus113 from errata paper
random32: move rnd_state to linux/random.h
random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized
random32: add periodic reseeding
random32: fix off-by-one in seeding requirement
PHY: Add RTL8201CP phy_driver to realtek
xtsonic: add missing platform_set_drvdata() in xtsonic_probe()
macmace: add missing platform_set_drvdata() in mace_probe()
ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe()
ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh
vlan: Implement vlan_dev_get_egress_qos_mask as an inline.
ixgbe: add warning when max_vfs is out of range.
igb: Update link modes display in ethtool
netfilter: push reasm skb through instead of original frag skbs
ip6_output: fragment outgoing reassembled skb properly
MAINTAINERS: mv643xx_eth: take over maintainership from Lennart
net_sched: tbf: support of 64bit rates
ixgbe: deleting dfwd stations out of order can cause null ptr deref
ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS
...
Linus Torvalds [Wed, 13 Nov 2013 06:45:43 +0000 (15:45 +0900)]
Merge branch 'akpm' (patches from Andrew Morton)
Merge first patch-bomb from Andrew Morton:
"Quite a lot of other stuff is banked up awaiting further
next->mainline merging, but this batch contains:
- Lots of random misc patches
- OCFS2
- Most of MM
- backlight updates
- lib/ updates
- printk updates
- checkpatch updates
- epoll tweaking
- rtc updates
- hfs
- hfsplus
- documentation
- procfs
- update gcov to gcc-4.7 format
- IPC"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
ipc, msg: fix message length check for negative values
ipc/util.c: remove unnecessary work pending test
devpts: plug the memory leak in kill_sb
./Makefile: export initial ramdisk compression config option
init/Kconfig: add option to disable kernel compression
drivers: w1: make w1_slave::flags long to avoid memory corruption
drivers/w1/masters/ds1wm.cuse dev_get_platdata()
drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
drivers/memstick/core/mspro_block.c: fix attributes array allocation
drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
kernel/panic.c: reduce 1 byte usage for print tainted buffer
gcov: reuse kbasename helper
kernel/gcov/fs.c: use pr_warn()
kernel/module.c: use pr_foo()
gcov: compile specific gcov implementation based on gcc version
gcov: add support for gcc 4.7 gcov format
gcov: move gcov structs definitions to a gcc version specific file
kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
...
Linus Torvalds [Wed, 13 Nov 2013 06:34:18 +0000 (15:34 +0900)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"All kinds of stuff this time around; some more notable parts:
- RCU'd vfsmounts handling
- new primitives for coredump handling
- files_lock is gone
- Bruce's delegations handling series
- exportfs fixes
plus misc stuff all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits)
ecryptfs: ->f_op is never NULL
locks: break delegations on any attribute modification
locks: break delegations on link
locks: break delegations on rename
locks: helper functions for delegation breaking
locks: break delegations on unlink
namei: minor vfs_unlink cleanup
locks: implement delegations
locks: introduce new FL_DELEG lock flag
vfs: take i_mutex on renamed file
vfs: rename I_MUTEX_QUOTA now that it's not used for quotas
vfs: don't use PARENT/CHILD lock classes for non-directories
vfs: pull ext4's double-i_mutex-locking into common code
exportfs: fix quadratic behavior in filehandle lookup
exportfs: better variable name
exportfs: move most of reconnect_path to helper function
exportfs: eliminate unused "noprogress" counter
exportfs: stop retrying once we race with rename/remove
exportfs: clear DISCONNECTED on all parents sooner
exportfs: more detailed comment for path_reconnect
...
Linus Torvalds [Wed, 13 Nov 2013 06:31:13 +0000 (15:31 +0900)]
Merge tag 'dlm-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm fix from David Teigland:
"This set includes a single fix to resolve to a race that could cause
lockspace shutdown to incorrectly return -EBUSY"
* tag 'dlm-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: Avoid that dlm_release_lockspace() incorrectly returns -EBUSY
Linus Torvalds [Wed, 13 Nov 2013 06:29:38 +0000 (15:29 +0900)]
Merge tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubi
Pull UBI changes from Artem Bityutskiy:
"A bunch of fixes for the fastmap feature, which is still new and
rather experimental. It looks like it starts getting more users.
No significant changes for the "classical" non-fastmap UBI"
* tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubi:
UBI: Add some asserts to ubi_attach_fastmap()
UBI: Fix memory leak in ubi_attach_fastmap() error path
UBI: simplify image sequence test
UBI: fastmap: fix backward compatibility with image_seq
UBI: Call scan_all() with correct offset in error case
UBI: Fix error path in scan_pool()
UBI: fix refill_wl_user_pool()
Linus Torvalds [Wed, 13 Nov 2013 06:28:45 +0000 (15:28 +0900)]
Merge tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubifs
Pull ubifs changes from Artem Bityutskiy:
"Mostly fixes for the power cut emulation UBIFS mode, and only one
functional change which fixes a return error code"
* tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubifs:
UBIFS: correct data corruption range
UBIFS: fix return code
UBIFS: remove unnecessary code in ubifs_garbage_collect
Linus Torvalds [Wed, 13 Nov 2013 06:27:00 +0000 (15:27 +0900)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
"This adds a ->writepage() implementation to fuse, improving mmaped
writeout and paving the way for buffered writeback.
And there's a patch to add a fix minor number for /dev/cuse, similarly
to /dev/fuse"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: writepages: protect secondary requests from fuse file release
fuse: writepages: update bdi writeout when deleting secondary request
fuse: writepages: crop secondary requests
fuse: writepages: roll back changes if request not found
cuse: add fix minor number to /dev/cuse
fuse: writepage: skip already in flight
fuse: writepages: handle same page rewrites
fuse: writepages: fix aggregation
fuse: fix race in fuse_writepages()
fuse: Implement writepages callback
fuse: don't BUG on no write file
fuse: lock page in mkwrite
fuse: Prepare to handle multiple pages in writeback
fuse: Getting file for writeback helper
Linus Torvalds [Wed, 13 Nov 2013 06:25:47 +0000 (15:25 +0900)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext[23], udf and quota fixes from Jan Kara:
"Assorted fixes in quota, ext2, ext3 & udf.
Probably the most important is a fix of fs corruption issue in ext2
XIP support (OTOH xip is rarely used)"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Fix fs corruption in ext2_get_xip_mem()
quota: info leak in quota_getquota()
jbd: Revert "jbd: remove dependency on __GFP_NOFAIL"
udf: fix for pathetic mount times in case of invalid file system
ext3: Count journal as bsddf overhead in ext3_statfs
Linus Torvalds [Wed, 13 Nov 2013 06:24:40 +0000 (15:24 +0900)]
Merge tag 'for-f2fs-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This patch-set includes the following major enhancement patches.
- add a sysfs to control reclaiming free segments
- enhance the f2fs global lock procedures
- enhance the victim selection flow
- wait for selected node blocks during fsync
- add some tracepoints
- add a config to remove abundant BUG_ONs
The other bug fixes are as follows.
- fix deadlock on acl operations
- fix some bugs with respect to orphan inodes
And, there are a bunch of cleanups"
* tag 'for-f2fs-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
f2fs: issue more large discard command
f2fs: fix memory leak after kobject init failed in fill_super
f2fs: cleanup waiting routine for writeback pages in cp
f2fs: avoid to use a NULL point in destroy_segment_manager
f2fs: remove unnecessary TestClearPageError when wait pages writeback
f2fs: update f2fs document
f2fs: avoid to wait all the node blocks during fsync
f2fs: check all ones or zeros bitmap with bitops for better mount performance
f2fs: change the method of calculating the number summary blocks
f2fs: fix calculating incorrect free size when update xattr in __f2fs_setxattr
f2fs: add an option to avoid unnecessary BUG_ONs
f2fs: introduce CONFIG_F2FS_CHECK_FS for BUG_ON control
f2fs: fix a deadlock during init_acl procedure
f2fs: clean up acl flow for better readability
f2fs: remove unnecessary segment bitmap updates
f2fs: add tracepoint for vm_page_mkwrite
f2fs: add tracepoint for set_page_dirty
f2fs: remove redundant set_page_dirty from write_compacted_summaries
f2fs: add reclaiming control by sysfs
f2fs: introduce f2fs_balance_fs_bg for some background jobs
...
Linus Torvalds [Wed, 13 Nov 2013 06:21:53 +0000 (15:21 +0900)]
Merge branch 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
"Not too much activity this time around. css_id is finally killed and
a minor update to device_cgroup"
* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
device_cgroup: remove can_attach
cgroup: kill css_id
memcg: stop using css id
memcg: fail to create cgroup if the cgroup id is too big
memcg: convert to use cgroup id
memcg: convert to use cgroup_is_descendant()
Linus Torvalds [Wed, 13 Nov 2013 06:18:22 +0000 (15:18 +0900)]
Merge branch 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata changes from Tejun Heo:
"Nothing too interesting. Only two minor fixes in libata core. Most
changes are specific to hardware which isn't too common"
* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: Add Device IDs for Intel Wildcat Point-LP
sata_rcar: Convert to clk_prepare/unprepare
drivers/libata: Set max sector to 65535 for Slimtype DVD A DS8A9SH drive
libata: Add some missing command descriptions
sata_highbank: clear whole array in highbank_initialize_phys()
ahci: disabled FBS prior to issuing software reset
libata: Fix display of sata speed
ahci: imx: setup power saving methods
ata_piix: minor typo and a printk fix
ahci: Changing two module params with static and __read_mostly
Linus Torvalds [Wed, 13 Nov 2013 06:17:16 +0000 (15:17 +0900)]
Merge branch 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu changes from Tejun Heo:
"Two smallish changes for percpu. Two patches to remove unused
this_cpu_xor() and one to fix a bug in percpu init failure path so
that it can reach the proper BUG() instead of oopsing earlier"
* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
x86: remove this_cpu_xor() implementation
percpu: remove this_cpu_xor() implementation
percpu: fix bootmem error handling in pcpu_page_first_chunk()
Mathias Krause [Tue, 12 Nov 2013 23:11:47 +0000 (15:11 -0800)]
ipc, msg: fix message length check for negative values
On 64 bit systems the test for negative message sizes is bogus as the
size, which may be positive when evaluated as a long, will get truncated
to an int when passed to load_msg(). So a long might very well contain a
positive value but when truncated to an int it would become negative.
That in combination with a small negative value of msg_ctlmax (which will
be promoted to an unsigned type for the comparison against msgsz, making
it a big positive value and therefore make it pass the check) will lead to
two problems: 1/ The kmalloc() call in alloc_msg() will allocate a too
small buffer as the addition of alen is effectively a subtraction. 2/ The
copy_from_user() call in load_msg() will first overflow the buffer with
userland data and then, when the userland access generates an access
violation, the fixup handler copy_user_handle_tail() will try to fill the
remainder with zeros -- roughly 4GB. That almost instantly results in a
system crash or reset.
,-[ Reproducer (needs to be run as root) ]--
| #include <sys/stat.h>
| #include <sys/msg.h>
| #include <unistd.h>
| #include <fcntl.h>
|
| int main(void) {
| long msg = 1;
| int fd;
|
| fd = open("/proc/sys/kernel/msgmax", O_WRONLY);
| write(fd, "-1", 2);
| close(fd);
|
| msgsnd(0, &msg, 0xfffffff0, IPC_NOWAIT);
|
| return 0;
| }
'---
Fix the issue by preventing msgsz from getting truncated by consistently
using size_t for the message length. This way the size checks in
do_msgsnd() could still be passed with a negative value for msg_ctlmax but
we would fail on the buffer allocation in that case and error out.
Also change the type of m_ts from int to size_t to avoid similar nastiness
in other code paths -- it is used in similar constructs, i.e. signed vs.
unsigned checks. It should never become negative under normal
circumstances, though.
Setting msg_ctlmax to a negative value is an odd configuration and should
be prevented. As that might break existing userland, it will be handled
in a separate commit so it could easily be reverted and reworked without
reintroducing the above described bug.
Hardening mechanisms for user copy operations would have catched that bug
early -- e.g. checking slab object sizes on user copy operations as the
usercopy feature of the PaX patch does. Or, for that matter, detect the
long vs. int sign change due to truncation, as the size overflow plugin
of the very same patch does.
Ilija Hadzic [Tue, 12 Nov 2013 23:11:45 +0000 (15:11 -0800)]
devpts: plug the memory leak in kill_sb
When devpts is unmounted, there may be a no-longer-used IDR tree hanging
off the superblock we are about to kill. This needs to be cleaned up
before destroying the SB.
The leak is usually not a big deal because unmounting devpts is typically
done when shutting down the whole machine. However, shutting down an LXC
container instead of a physical machine exposes the problem (the garbage
is detectable with kmemleak).
Make menuconfig allows one to choose compression format of an initial
ramdisk image. But this choice does not result in duly compressed ramdisk
image. Because - $ make install - does not pass on the selected
compression choice to the dracut(8) tool, which creates the initramfs
file. dracut(8) generates the image with the default compression, ie.
gzip(1).
This patch exports the selected compression option to a sub-shell
environment, so that it could be used by dracut(8) tool to generate
appropriately compressed initramfs images.
There isn't a straightforward way to pass on options to dracut(8) via
positional parameters. Because it is indirectly invoked at the end of a $
make install sequence.
Signed-off-by: P J P <ppandit@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
init/Kconfig: add option to disable kernel compression
Some ARC users say they can boot faster with without kernel compression.
This probably depends on things like the FLASH chip they use etc.
Until now, kernel compression can only be disabled by removing "select
HAVE_<compression>" lines from the architecture Kconfig. So add the
Kconfig logic to permit disabling of kernel compression.
Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers: w1: make w1_slave::flags long to avoid memory corruption
On architectures where long is more then 32 bits, modifying a 32-bit field
with set_bit (and other atomic bit operations) may cause bytes following
the field to by modified.
Because the endianness of the bits within a field is the native endianness
of the CPU[1], on big-endian machines, bit number zero is in the last byte
of the field.
Therefore, `set_bit(0, ptr)' on a 64-bit big-endian machine is roughly
equivalent to `((char *)ptr)[7] |= 1', and since w1 driver uses a 32-bit
field for holding the flags, this causes bytes beyond the field to be
modified.
[1] From Documentation/atomic_ops.txt:
Native atomic bit operations are defined to operate on objects
aligned to the size of an "unsigned long" C data type, and are
least of that size. The endianness of the bits within each
"unsigned long" are the native endianness of the cpu.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Tue, 12 Nov 2013 23:11:41 +0000 (15:11 -0800)]
drivers/w1/masters/ds1wm.cuse dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change to make
the code simpler and enhance the readability.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roger Tseng [Tue, 12 Nov 2013 23:11:40 +0000 (15:11 -0800)]
drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
In h_msb_read_page() in ms_block.c, flow never reaches case
MSB_RP_RECIVE_STATUS_REG. This causes error when MEMSTICK_INT_ERR is
encountered and status error bits are going to be examined, but the status
will never be copied back.
Fix it by transitioning to MSB_RP_RECIVE_STATUS_REG right after
MSB_RP_SEND_READ_STATUS_REG.
Signed-off-by: Roger Tseng <rogerable@realtek.com> Acked-by: Maxim Levitsky <maximlevitsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
attrs field of attribute_group structure is a pointer to a pointer (as in
an array of pointers) rather than pointer to attribute struct (as in an
array of structures), so when allocating size of the pointer sholud be
used instead of the structure it is pointing to.
While at it, also change the call to use kcalloc rather than kzalloc.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Tejun Heo <tj@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alex Dubov <oakad@yahoo.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Tue, 12 Nov 2013 23:11:31 +0000 (15:11 -0800)]
gcov: reuse kbasename helper
To get name of the file from a pathname let's use kbasename() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Frantisek Hrbata [Tue, 12 Nov 2013 23:11:26 +0000 (15:11 -0800)]
gcov: add support for gcc 4.7 gcov format
The gcov in-memory format changed in gcc 4.7. The biggest change, which
requires this special implementation, is that gcov_info no longer contains
array of counters for each counter type for all functions and gcov_fn_info
is not used for mapping of function's counters to these arrays(offset).
Now each gcov_fn_info contans it's counters, which makes things a little
bit easier.
This is heavily based on the previous gcc_3_4.c implementation and patches
provided by Peter Oberparleiter. Specially the buffer gcda implementation
for iterator.
[akpm@linux-foundation.org: use kmemdup() and kcalloc()]
[oberpar@linux.vnet.ibm.com: gcc_4_7.c needs vmalloc.h] Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com> Cc: Jan Stancek <jstancek@redhat.com> Cc: Kees Cook <keescook@chromium.org> Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Gospodarek <agospoda@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Frantisek Hrbata [Tue, 12 Nov 2013 23:11:24 +0000 (15:11 -0800)]
gcov: move gcov structs definitions to a gcc version specific file
Since also the gcov structures(gcov_info, gcov_fn_info, gcov_ctr_info) can
change between gcc releases, as shown in gcc 4.7, they cannot be defined
in a common header and need to be moved to a specific gcc implemention
file. This also requires to make the gcov_info structure opaque for the
common code and to introduce simple helpers for accessing data inside
gcov_info.
Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com> Cc: Jan Stancek <jstancek@redhat.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Gospodarek <agospoda@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chen Gang [Tue, 12 Nov 2013 23:11:23 +0000 (15:11 -0800)]
kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
For registering in add_del_listener(), when kmalloc_node() fails, need
return -ENOMEM instead of success code, and cmd_attr_register_cpumask()
wants to know about it.
After modification, give a simple common test "build -> boot up ->
kernel/controllers/cgroup/getdelays by LTP tools".
Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chen Gang [Tue, 12 Nov 2013 23:11:22 +0000 (15:11 -0800)]
kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
snprintf() will return the 'ideal' length which may be larger than real
buffer length, if we only want to use real length, need use scnprintf()
instead of.
Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The iterator rbtree_postorder_for_each_entry_safe() relies on pointer
underflow behavior when testing for loop termination. In particular it
expects that
&rb_entry(NULL, type, field)->field
is NULL. But the result of this expression is not defined by a C standard
and some gcc versions (e.g. 4.3.4) assume the above expression can never
be equal to NULL. The net result is an oops because the iteration is not
properly terminated.
Fix the problem by modifying the iterator to avoid pointer underflows.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Michel Lespinasse <walken@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <stable@vger.kernel.org> [3.12.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Tue, 12 Nov 2013 23:11:17 +0000 (15:11 -0800)]
exec/ptrace: fix get_dumpable() incorrect tests
The get_dumpable() return value is not boolean. Most users of the
function actually want to be testing for non-SUID_DUMP_USER(1) rather than
SUID_DUMP_DISABLE(0). The SUID_DUMP_ROOT(2) is also considered a
protected state. Almost all places did this correctly, excepting the two
places fixed in this patch.
Wrong logic:
if (dumpable == SUID_DUMP_DISABLE) { /* be protective */ }
or
if (dumpable == 0) { /* be protective */ }
or
if (!dumpable) { /* be protective */ }
Correct logic:
if (dumpable != SUID_DUMP_USER) { /* be protective */ }
or
if (dumpable != 1) { /* be protective */ }
Without this patch, if the system had set the sysctl fs/suid_dumpable=2, a
user was able to ptrace attach to processes that had dropped privileges to
that user. (This may have been partially mitigated if Yama was enabled.)
The macros have been moved into the file that declares get/set_dumpable(),
which means things like the ia64 code can see them too.
projects / mirror_ubuntu-focal-kernel.git / log