Arınç ÜNAL [Mon, 20 Mar 2023 19:05:19 +0000 (22:05 +0300)]
net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()
Move lowering the TRGMII Tx clock driving to mt7530_setup(), after setting
the core clock, as seen on the U-Boot MediaTek ethernet driver.
Move the code which looks like it lowers the TRGMII Rx clock driving to
after the TRGMII Tx clock driving is lowered. This is run after lowering
the Tx clock driving on the U-Boot MediaTek ethernet driver as well.
This way, the switch should consume less power regardless of port 6 being
used.
Update the comment explaining mt7530_pad_clk_setup().
Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.
Arınç ÜNAL [Mon, 20 Mar 2023 19:05:18 +0000 (22:05 +0300)]
net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()
Split the code that enables and disables TRGMII clocks and core clock.
Move enabling and disabling core clock to mt7530_pll_setup() as it's
supposed to be run there.
Add 20 ms delay before enabling the core clock as seen on the U-Boot
MediaTek ethernet driver.
Change the comment for enabling and disabling TRGMII clocks as the code
seems to affect both TXC and RXC.
Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.
Issue was originally reported by Anton Lundin on 2022-06-22 (link below).
Chrome OS team hit the same issue in Feb, 2023 when trying to find
work arounds for other issues with AX88172 devices.
The use of devm_mdiobus_register() with usbnet devices results in the
MDIO data being associated with the USB device. When the asix driver
is unloaded, the USB device continues to exist and the corresponding
"mdiobus_unregister()" is NOT called until the USB device is unplugged
or unauthorized. So the next "modprobe asix" will fail because the MDIO
phy sysfs attributes still exist.
The 'easy' (from a design PoV) fix is to use the non-devm variants of
mdiobus_* functions and explicitly manage this use in the asix_bind
and asix_unbind function calls. I've not explored trying to fix usbnet
initialization so devm_* stuff will work.
The link speed is never changed for the uptime of a VM, and the current
implementation sends an admin queue command for each call. Admin queue
command invocations have nontrivial overhead (e.g., VM exits), which can
be disruptive to users if triggered frequently. Our telemetry data shows
that there are VMs that make frequent calls to this admin queue command.
Caching the result of the original admin queue command would eliminate
the need to send multiple admin queue commands on subsequent calls to
retrieve link speed.
Fixes: 7e074d5a76ca ("gve: Enable Link Speed Reporting in the driver.") Signed-off-by: Joshua Washington <joshwash@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230321172332.91678-1-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 21 Mar 2023 23:28:31 +0000 (01:28 +0200)]
net: enetc: fix aggregate RMON counters not showing the ranges
When running "ethtool -S eno0 --groups rmon" without an explicit "--src
emac|pmac" argument, the kernel will not report
rx-rmon-etherStatsPkts64to64Octets, rx-rmon-etherStatsPkts65to127Octets,
etc. This is because on ETHTOOL_MAC_STATS_SRC_AGGREGATE, we do not
populate the "ranges" argument.
ocelot_port_get_rmon_stats() does things differently and things work
there. I had forgotten to make sure that the code is structured the same
way in both drivers, so do that now.
Fixes: cf52bd238b75 ("net: enetc: add support for MAC Merge statistics counters") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230321232831.1200905-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 21 Mar 2023 11:42:00 +0000 (12:42 +0100)]
mlxsw: spectrum_fid: Fix incorrect local port type
Local port is a 10-bit number, but it was mistakenly stored in a u8,
resulting in firmware errors when using a netdev corresponding to a
local port higher than 255.
Fix by storing the local port in u16, as is done in the rest of the
code.
Fixes: bf73904f5fba ("mlxsw: Add support for 802.1Q FID family") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/eace1f9d96545ab8a2775db857cb7e291a9b166b.1679398549.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
Fix trainwreck with Ocelot switch statistics counters
While testing the patch set for preemptible traffic classes with some
controlled traffic and measuring counter deltas:
https://lore.kernel.org/netdev/20230220122343.1156614-1-vladimir.oltean@nxp.com/
I noticed that in the output of "ethtool -S swp0 --groups eth-mac
eth-phy eth-ctrl rmon -- --src emac | grep -v ': 0'", the TX counters
were off. Quickly I realized that their values were permutated by 1
compared to their names, and that for example
tx-rmon-etherStatsPkts64to64Octets was incrementing when
tx-rmon-etherStatsPkts65to127Octets should have.
Initially I suspected something having to do with the bulk reading
logic, and indeed I found a bug there (fixed as 1/3), but that was not
the source of the problems. Instead it revealed other problems.
While dumping the regions created by the driver on my switch, I figured
out that it sees a discontinuity which shouldn't have existed between
reg 0x278 and reg 0x280.
Discontinuity between last reg 0x0 and new reg 0x0, creating new region
Discontinuity between last reg 0x108 and new reg 0x200, creating new region
Discontinuity between last reg 0x278 and new reg 0x280, creating new region
Discontinuity between last reg 0x2b0 and new reg 0x400, creating new region
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 31 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 13 contiguous counters starting with SYS:STAT:CNT[0x0a0]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]
That is where TX_MM_HOLD should have been, and that was the bug, since
it was missing. After adding it, the regions look like this and the
off-by-one issue is resolved:
Discontinuity between last reg 0x000000 and new reg 0x000000, creating new region
Discontinuity between last reg 0x000108 and new reg 0x000200, creating new region
Discontinuity between last reg 0x0002b0 and new reg 0x000400, creating new region
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]
However, as I am thinking out loud, it should have not reported the
other counters as off by one even when skipping TX_MM_HOLD... after all,
on Ocelot/Seville, there are more counters which need to be skipped.
Which is when I investigated and noticed the bug solved in 2/3.
I've validated that both on native VSC9959 (which uses
ocelot_mm_stats_layout) as well as by faking the other switches by
making VSC9959 use the plain ocelot_stats_layout.
To summarize: on all Ocelot switches, the TX counters and drop counters
are completely broken. The RX counters are mostly fine.
With this occasion, I have collected more cleanup patches in this area,
which I'm going to submit after the net -> net-next merge.
====================
Vladimir Oltean [Tue, 21 Mar 2023 01:03:25 +0000 (03:03 +0200)]
net: mscc: ocelot: add TX_MM_HOLD to ocelot_mm_stats_layout
The lack of a definition for this counter is what initially prompted me
to investigate a problem which really manifested itself as the previous
change, "net: mscc: ocelot: fix transfer from region->buf to ocelot->stats".
When TX_MM_HOLD is defined in enum ocelot_stat but not in struct
ocelot_stat_layout ocelot_mm_stats_layout, this creates a hole, which
due to the aforementioned bug, makes all counters following TX_MM_HOLD
be recorded off by one compared to their correct position. So for
example, a non-zero TX_PMAC_OCTETS would be reported as TX_MERGE_FRAGMENTS,
TX_PMAC_UNICAST would be reported as TX_PMAC_OCTETS, TX_PMAC_64 would be
reported as TX_PMAC_PAUSE, etc etc. This is because the size of the hole
(1) is much smaller than the size of the region, so the phenomenon where
the stats are off-by-one, rather than lost, prevails.
However, the phenomenon where stats are lost can be seen too, for
example with DROP_LOCAL, which is at the beginning of its own region
(offset 0x000400 vs the previous 0x0002b0 constitutes a discontinuity).
This is also reported as off by one and saved to TX_PMAC_1527_MAX, but
that counter is not reported to the unstructured "ethtool -S", as
opposed to DROP_LOCAL which is (as "drop_local").
Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 21 Mar 2023 01:03:24 +0000 (03:03 +0200)]
net: mscc: ocelot: fix transfer from region->buf to ocelot->stats
To understand the problem, we need some definitions.
The driver is aware of multiple counters (enum ocelot_stat), yet not all
switches supported by the driver implement all counters. There are 2
statistics layouts: ocelot_stats_layout and ocelot_mm_stats_layout, the
latter having 36 counters more than the former.
ocelot->stats[] is not a compact array, i.e. there are elements within
it which are not going to be populated for ocelot_stats_layout. On the
other hand, ocelot->stats[] is easily indexable, for example "tx_octets"
for port 3 can be found at ocelot->stats[3 * OCELOT_NUM_STATS +
OCELOT_STAT_TX_OCTETS], and that is why we keep it sparse.
Regions, as created by ocelot_prepare_stats_regions(), are compact
(every element from region->buf will correspond to a counter that is
present in this switch's layout) but are not easily indexable.
Let's define holes as the ranges of values of enum ocelot_stat for which
ocelot_stats_layout doesn't have a "reg" defined. For example, there is
a hole between OCELOT_STAT_RX_GREEN_PRIO_7 and OCELOT_STAT_TX_OCTETS
which is of 23 elements that are only present on ocelot_mm_stats_layout,
and as such, they are also present in enum ocelot_stat. Let's define the
left extremity of the hole - the last enum ocelot_stat still defined -
as A (in this case OCELOT_STAT_RX_GREEN_PRIO_7) and the right extremity -
the first enum ocelot_stat that is defined after a series of undefined
ones - as B (in this case OCELOT_STAT_TX_OCTETS).
There is a bug in the procedure which transfers stats from region->buf[]
to ocelot->stats[].
For each hole in the ocelot_stats_layout, the logic transfers the stats
starting with enum ocelot_stat B to ocelot->stats[] index A + 1. So all
stats after a hole are saved to a position which is off by B - A + 1
elements.
This causes 2 kinds of issues:
(a) counters which shouldn't increment increment
(b) counters which should increment don't
Holes in the ocelot_stat_layout automatically imply the end of a region
and the beginning of a new one; however the reverse is not necessarily
true. For example, for ocelot_mm_stat_layout, there could be multiple
regions (which indicate discontinuities in register addresses) while
there is no hole (which indicates discontinuities in enum ocelot_stat
values).
In the example above, the stats from the second region->buf[] are not
transferred to ocelot->stats starting with index
"port * OCELOT_NUM_STATS + OCELOT_STAT_TX_OCTETS" as they should, but
rather, starting with element
"port * OCELOT_NUM_STATS + OCELOT_STAT_RX_GREEN_PRIO_7 + 1".
That stats[] array element is not reported to user space for switches
that use ocelot_stat_layout, and that is how issue (b) occurs.
However, if the length of the second region is larger than the hole,
then some stats will start to be transferred to the ocelot->stats[]
indices which *are* reported to user space, but those indices contain
wrong values (corresponding to unexpected counters). This is how issue
(a) occurs.
The procedure, as it was introduced in commit d87b1c08f38a ("net: mscc:
ocelot: use bulk reads for stats"), was not buggy, because there were no
holes in the struct ocelot_stat_layout instances at that time. The
problem is that when those holes were introduced, the function was not
updated to take them into consideration.
To update the procedure, we need to know, for each region, which enum
ocelot_stat corresponds to its region->base. We have no way of deducing
that based on the contents of struct ocelot_stats_region, so we need to
add this information.
Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 21 Mar 2023 01:03:23 +0000 (03:03 +0200)]
net: mscc: ocelot: fix stats region batching
The blamed commit changed struct ocelot_stat_layout :: "u32 offset" to
"u32 reg".
However, "u32 reg" is not quite a register address, but an enum
ocelot_reg, which in itself encodes an enum ocelot_target target in the
upper bits, and an index into the ocelot->map[target][] array in the
lower bits.
So, whereas the previous code comparison between stats_layout[i].offset
and last + 1 was correct (because those "offsets" at the time were
32-bit relative addresses), the new code, comparing layout[i].reg to
last + 4 is not correct, because the "reg" here is an enum/index, not an
actual register address.
What we want to compare are indeed register addresses, but to do that,
we need to actually go through the same motions as
__ocelot_bulk_read_ix() itself.
With this bug, all statistics counters are deemed by
ocelot_prepare_stats_regions() as constituting their own region.
(Truncated) log on VSC9959 (Felix) below (prints added by me):
Before:
region of 1 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x001]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x002]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x041]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x042]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x081]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x0ac]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x100]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x101]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x111]
After:
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]
Since commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for
stats") intended bulking as a performance improvement, and since now,
with trivial-sized regions, performance is even worse than without
bulking at all, this could easily qualify as a performance regression.
Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Colin Foster <colin.foster@in-advantage.com> Tested-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The root cause is traced to the vc_maps which alloced in open_card_oam()
are not freed in close_card_oam(). The vc_maps are used to record
open connections, so when close a vc_map in close_card_oam(), the memory
should be freed. Moreover, the ubr0 is not closed when close a idt77252
device, leading to the memory leak of vc_map and scq_info.
Fix them by adding kfree in close_card_oam() and implementing new
close_card_ubr0() to close ubr0.
When BCM63xx internal switches are connected to switches with a 4-byte
Broadcom tag, it does not identify the packet as VLAN tagged, so it adds one
based on its PVID (which is likely 0).
Right now, the packet is received by the BCM63xx internal switch and the 6-byte
tag is properly processed. The next step would to decode the corresponding
4-byte tag. However, the internal switch adds an invalid VLAN tag after the
6-byte tag and the 4-byte tag handling fails.
In order to fix this we need to remove the invalid VLAN tag after the 6-byte
tag before passing it to the 4-byte tag decoding.
Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230319095540.239064-1-noltari@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiasheng Jiang [Fri, 17 Mar 2023 06:43:37 +0000 (14:43 +0800)]
octeontx2-vf: Add missing free for alloc_percpu
Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid
memory leak, same as the "pf->hw.lmt_info" in
`drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`.
Fixes: 5c0512072f65 ("octeontx2-pf: cn10k: Use runtime allocated LMTLINE region") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Acked-by: Geethasowjanya Akula <gakula@marvell.com> Link: https://lore.kernel.org/r/20230317064337.18198-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Mon, 20 Mar 2023 10:20:40 +0000 (10:20 +0000)]
Merge branch 'ps3_gelic_net-fixes'
Geoff Levand says:
====================
net/ps3_gelic_net: DMA related fixes
v9: Make rx_skb_size local to gelic_descr_prepare_rx.
v8: Add more cpu_to_be32 calls.
v7: Remove all cleanups, sync to spider net.
v6: Reworked and cleaned up patches.
v5: Some additional patch cleanups.
v4: More patch cleanups.
v3: Cleaned up patches as requested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geoff Levand [Sat, 18 Mar 2023 17:39:16 +0000 (17:39 +0000)]
net/ps3_gelic_net: Use dma_mapping_error
The current Gelic Etherenet driver was checking the return value of its
dma_map_single call, and not using the dma_mapping_error() routine.
Fixes runtime problems like these:
DMA-API: ps3_gelic_driver sb_05: device driver failed to check map error
WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:1027 .check_unmap+0x888/0x8dc
Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Geoff Levand [Sat, 18 Mar 2023 17:39:16 +0000 (17:39 +0000)]
net/ps3_gelic_net: Fix RX sk_buff length
The Gelic Ethernet device needs to have the RX sk_buffs aligned to
GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must
be a multiple of GELIC_NET_RXBUF_ALIGN.
The current Gelic Ethernet driver was not allocating sk_buffs large
enough to allow for this alignment.
Also, correct the maximum and minimum MTU sizes, and add a new
preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.
Fixes various randomly occurring runtime network errors.
Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Rix [Sat, 18 Mar 2023 13:13:42 +0000 (09:13 -0400)]
usb: plusb: remove unused pl_clear_QuickLink_features function
clang with W=1 reports
drivers/net/usb/plusb.c:65:1: error:
unused function 'pl_clear_QuickLink_features' [-Werror,-Wunused-function]
pl_clear_QuickLink_features(struct usbnet *dev, int val)
^
This static function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Szymon Heidrich [Sat, 18 Mar 2023 09:25:52 +0000 (10:25 +0100)]
net: usb: lan78xx: Limit packet length to skb->len
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Additionally prevent integer underflow when size is less than
ETH_FCS_LEN.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Wang [Sat, 18 Mar 2023 08:05:26 +0000 (16:05 +0800)]
net: qcom/emac: Fix use after free bug in emac_remove due to race condition
In emac_probe, &adpt->work_thread is bound with
emac_work_thread. Then it will be started by timeout
handler emac_tx_timeout or a IRQ handler emac_isr.
If we remove the driver which will call emac_remove
to make cleanup, there may be a unfinished work.
The possible sequence is as follows:
Fix it by finishing the work before cleanup in the emac_remove
and disable timeout response.
CPU0 CPU1
|emac_work_thread
emac_remove |
free_netdev |
kfree(netdev); |
|emac_reinit_locked
|emac_mac_down
|//use netdev Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 17 Mar 2023 23:19:00 +0000 (01:19 +0200)]
net: dsa: report rx_bytes unadjusted for ETH_HLEN
We collect the software statistics counters for RX bytes (reported to
/proc/net/dev and to ethtool -S $dev | grep 'rx_bytes: ") at a time when
skb->len has already been adjusted by the eth_type_trans() ->
skb_pull_inline(skb, ETH_HLEN) call to exclude the L2 header.
This means that when connecting 2 DSA interfaces back to back and
sending 1 packet with length 100, the sending interface will report
tx_bytes as incrementing by 100, and the receiving interface will report
rx_bytes as incrementing by 86.
Since accounting for that in scripts is quirky and is something that
would be DSA-specific behavior (requiring users to know that they are
running on a DSA interface in the first place), the proposal is that we
treat it as a bug and fix it.
This design bug has always existed in DSA, according to my analysis:
commit 91da11f870f0 ("net: Distributed Switch Architecture protocol
support") also updates skb->dev->stats.rx_bytes += skb->len after the
eth_type_trans() call. Technically, prior to Florian's commit a86d8becc3f0 ("net: dsa: Factor bottom tag receive functions"), each and
every vendor-specific tagging protocol driver open-coded the same bug,
until the buggy code was consolidated into something resembling what can
be seen now. So each and every driver should have its own Fixes: tag,
because of their different histories until the convergence point.
I'm not going to do that, for the sake of simplicity, but just blame the
oldest appearance of buggy code.
There are 2 ways to fix the problem. One is the obvious way, and the
other is how I ended up doing it. Obvious would have been to move
dev_sw_netstats_rx_add() one line above eth_type_trans(), and below
skb_push(skb, ETH_HLEN). But DSA processing is not as simple as that.
We count the bytes after removing everything DSA-related from the
packet, to emulate what the packet's length was, on the wire, when the
user port received it.
When eth_type_trans() executes, dsa_untag_bridge_pvid() has not run yet,
so in case the switch driver requests this behavior - commit 412a1526d067 ("net: dsa: untag the bridge pvid from rx skbs") has the
details - the obvious variant of the fix wouldn't have worked, because
the positioning there would have also counted the not-yet-stripped VLAN
header length, something which is absent from the packet as seen on the
wire (there it may be untagged, whereas software will see it as
PVID-tagged).
Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 17 Mar 2023 15:32:59 +0000 (16:32 +0100)]
mlxsw: core_thermal: Fix fan speed in maximum cooling state
The cooling levels array is supposed to prevent the system fans from
being configured below a 20% duty cycle as otherwise some of them get
stuck at 0 RPM.
Due to an off-by-one error, the last element in the array was not
initialized, causing it to be set to zero, which in turn lead to fans
being configured with a 0% duty cycle in maximum cooling state.
Since commit 332fdf951df8 ("mlxsw: thermal: Fix out-of-bounds memory
accesses") the contents of the array are static. Therefore, instead of
fixing the initialization of the array, simply remove it and adjust
thermal_cooling_device_ops::set_cur_state() so that the configured duty
cycle is never set below 20%.
This bug was uncovered when the thermal subsystem repeatedly tried to
configure the cooling devices to their maximum state due to another
issue [1]. This resulted in the fans being stuck at 0 RPM, which
eventually lead to the system undergoing thermal shutdown.
net: sfp: fix state loss when updating state_hw_mask
Andrew reports that the SFF modules on one of the ZII platforms do not
indicate link up due to the SFP code believing that LOS indicating that
there is no signal being received from the remote end, but in fact the
LOS signal is showing that there is signal.
What makes SFF modules different from SFPs is they typically have an
inverted LOS, which uncovered this issue. When we read the hardware
state, we mask it with state_hw_mask so we ignore anything we're not
interested in. However, we don't re-read when state_hw_mask changes,
leading to sfp->state being stale.
Arrange for a software poll of the module state after we have parsed
the EEPROM in sfp_sm_mod_probe() and updated state_*_mask. This will
generate any necessary events for signal changes for the state
machine as well as updating sfp->state.
Reported-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Fixes: 8475c4b70b04 ("net: sfp: re-implement soft state polling setup") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Jochen Henneberg [Fri, 17 Mar 2023 08:08:17 +0000 (09:08 +0100)]
net: stmmac: Fix for mismatched host/device DMA address width
Currently DMA address width is either read from a RO device register
or force set from the platform data. This breaks DMA when the host DMA
address width is <=32it but the device is >32bit.
Right now the driver may decide to use a 2nd DMA descriptor for
another buffer (happens in case of TSO xmit) assuming that 32bit
addressing is used due to platform configuration but the device will
still use both descriptor addresses as one address.
This can be observed with the Intel EHL platform driver that sets
32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in
case of TCP with iptables NAT configuration on TSO packets.
The logic should be like this: Whatever we do on the host side (memory
allocation GFP flags) should happen with the host DMA width, whenever
we decide how to set addresses on the device registers we must use the
device DMA address width.
This patch renames the platform address width field from addr64 (term
used in device datasheet) to host_addr and uses this value exclusively
for host side operations while all chip operations consider the device
DMA width as read from the device register.
Fixes: 7cfc4486e7ea ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing") Signed-off-by: Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 16 Mar 2023 23:33:17 +0000 (16:33 -0700)]
net: mdio: fix owner field for mdio buses registered using ACPI
Bus ownership is wrong when using acpi_mdiobus_register() to register an
mdio bus. That function is not inline, so when it calls
mdiobus_register() the wrong THIS_MODULE value is captured.
CC: Maxime Bizon <mbizon@freebox.fr> Fixes: 803ca24d2f92 ("net: mdio: Add ACPI support code for mdio") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Bizon [Thu, 16 Mar 2023 23:33:16 +0000 (16:33 -0700)]
net: mdio: fix owner field for mdio buses registered using device-tree
Bus ownership is wrong when using of_mdiobus_register() to register an mdio
bus. That function is not inline, so when it calls mdiobus_register() the wrong
THIS_MODULE value is captured.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
[florian: fix kdoc, added Fixes tag] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 16 Mar 2023 20:33:24 +0000 (13:33 -0700)]
net: phy: Ensure state transitions are processed from phy_stop()
In the phy_disconnect() -> phy_stop() path, we will be forcibly setting
the PHY state machine to PHY_HALTED. This invalidates the old_state !=
phydev->state condition in phy_state_machine() such that we will neither
display the state change for debugging, nor will we invoke the
link_change_notify() callback.
Factor the code by introducing phy_process_state_change(), and ensure
that we process the state change from phy_stop() as well.
Fixes: 5c5f626bcace ("net: phy: improve handling link_change_notify callback") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 19 Mar 2023 10:44:24 +0000 (10:44 +0000)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-16 (igb, igbvf, igc)
This series contains updates to igb, igbvf, and igc drivers.
Lin Ma removes rtnl_lock() when disabling SRIOV on remove which was
causing deadlock on igb.
Akihiko Odaki delays enabling of SRIOV on igb to prevent early messages
that could get ignored and clears MAC address when PF returns nack on
reset; indicating no MAC address was assigned for igbvf.
Gaosheng Cui frees IRQs in error path for igbvf.
Akashi Takahiro fixes logic on checking TAPRIO gate support for igc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Wang [Thu, 16 Mar 2023 16:15:26 +0000 (00:15 +0800)]
xirc2ps_cs: Fix use after free bug in xirc2ps_detach
In xirc2ps_probe, the local->tx_timeout_task was bounded
with xirc2ps_tx_timeout_task. When timeout occurs,
it will call xirc_tx_timeout->schedule_work to start the
work.
When we call xirc2ps_detach to remove the driver, there
may be a sequence as follows:
Stop responding to timeout tasks and complete scheduled
tasks before cleanup in xirc2ps_detach, which will fix
the problem.
Daniil Tatianin [Thu, 16 Mar 2023 10:29:21 +0000 (13:29 +0300)]
qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info
We have to make sure that the info returned by the helper is valid
before using it.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust") Fixes: 733def6a04bf ("qed*: IOV link control") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 18 Mar 2023 05:39:33 +0000 (22:39 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-16 (iavf)
This series contains updates to iavf driver only.
Alex fixes incorrect check against Rx hash feature and corrects payload
value for IPv6 UDP packet.
Ahmed removes bookkeeping of VLAN 0 filter as it always exists and can
cause a false max filter error message.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: do not track VLAN 0 filters
iavf: fix non-tunneled IPv6 UDP packet type and hashing
iavf: fix inverted Rx hash condition leading to disabled hash
====================
Szymon Heidrich [Thu, 16 Mar 2023 10:19:54 +0000 (11:19 +0100)]
net: usb: smsc95xx: Limit packet length to skb->len
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
Linus Torvalds [Fri, 17 Mar 2023 18:20:27 +0000 (11:20 -0700)]
Merge tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A bit bigger than usual, as the NVMe pull request missed last weeks
submission. In detail:
- NVMe pull request via Christoph:
- Avoid potential UAF in nvmet_req_complete (Damien Le Moal)
- More quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
- Fix a memory leak in the nvme-pci probe teardown path
(Irvin Cote)
- Repair the MAINTAINERS entry (Lukas Bulwahn)
- Fix handling single range discard request (Ming Lei)
- Show more opcode names in trace events (Minwoo Im)
- Fix nvme-tcp timeout reporting (Sagi Grimberg)
- MD pull request via Song:
- Two fixes for old issues (Neil)
- Resource leak in device stopping (Xiao)
- Fix for reversal of request ordering upon issue for certain cases
(Jan)
- null_blk timeout fixes (Damien)
- Loop use-after-free fix (Bart)
- blk-mq SRCU fix for BLK_MQ_F_BLOCKING devices (Chris)"
* tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux:
block: remove obsolete config BLOCK_COMPAT
md: select BLOCK_LEGACY_AUTOLOAD
block: count 'ios' and 'sectors' when io is done for bio-based device
block: sunvdc: add check for mdesc_grab() returning NULL
nvmet: avoid potential UAF in nvmet_req_complete()
nvme-trace: show more opcode names
nvme-tcp: add nvme-tcp pdu size build protection
nvme-tcp: fix opcode reporting in the timeout handler
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
nvme-pci: fixing memory leak in probe teardown path
nvme: fix handling single range discard request
MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
block: null_blk: cleanup null_queue_rq()
block: null_blk: Fix handling of fake timeout request
blk-mq: fix "bad unlock balance detected" on q->srcu in __blk_mq_run_dispatch_ops
loop: Fix use-after-free issues
block: do not reverse request order when flushing plug list
md: avoid signed overflow in slot_store()
md: Free resources in __md_stop
Linus Torvalds [Fri, 17 Mar 2023 18:12:07 +0000 (11:12 -0700)]
Merge tag 'io_uring-6.3-2023-03-16' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- When PF_NO_SETAFFINITY was removed for io-wq threads, we kind of
forgot about the SQPOLL thread. Remove it there as well, there's even
less of a reason to set it there (Michal)
- Fixup a confusing 'ret' setting (Li)
- When MSG_RING is used to send a direct descriptor to another ring,
it's possible to have it allocate it on the target ring rather than
provide a specific index for it. If this is done, return the chosen
value in the CQE, like we would've done locally (Pavel)
- Fix a regression in this series on huge page bvec collapsing (Pavel)
* tag 'io_uring-6.3-2023-03-16' of git://git.kernel.dk/linux:
io_uring/rsrc: fix folio accounting
io_uring/msg_ring: let target know allocated index
io_uring: rsrc: Optimize return value variable 'ret'
io_uring/sqpoll: Do not set PF_NO_SETAFFINITY on sqpoll threads
Linus Torvalds [Fri, 17 Mar 2023 18:02:26 +0000 (11:02 -0700)]
Merge tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an error code path issue in a cpuidle driver and make the
sleepgraph utility more robust against unexpected input.
Specifics:
- Fix the psci_pd_init_topology() failure path in the PSCI cpuidle
driver (Shawn Guo)
- Modify the sleepgraph utility so it does not crash on binary data
in device names (Todd Brandt)"
* tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
pm-graph: sleepgraph: Avoid crashing on binary data in device names
cpuidle: psci: Iterate backwards over list in psci_pd_remove()
Linus Torvalds [Fri, 17 Mar 2023 17:57:09 +0000 (10:57 -0700)]
Merge tag 'acpi-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add some new quirks, fix PPTT handling, fix an ACPI utility and
correct a mistake in the ACPI documentation.
Specifics:
- Fix ACPI PPTT handling to avoid sleep in the atomic context when it
is not present (Sudeep Holla)
- Add 'backlight=native' DMI quirk for Dell Vostro 15 3535 to the
ACPI video driver (Chia-Lin Kao)
- Add ACPI quirks for I2C device enumeration on Lenovo Yoga Book X90
and Acer Iconia One 7 B1-750 (Hans de Goede)
- Fix handling of invalid command line option values in the ACPI
pfrut utility (Chen Yu)
- Fix references to I2C device data type in the ACPI documentation
for device enumeration (Andy Shevchenko)"
* tag 'acpi-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range
ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750
ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper
ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535
ACPI: docs: enumeration: Correct reference to the I²C device data type
Linus Torvalds [Fri, 17 Mar 2023 17:33:33 +0000 (10:33 -0700)]
Merge tag 'riscv-for-linus-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fixes to the ASID allocator to avoid leaking stale mappings between
tasks
- fix the vmalloc fault handler to tolerate huge pages
* tag 'riscv-for-linus-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: mm: Support huge page in vmalloc_fault()
riscv: asid: Fixup stale TLB entry cause application crash
Revert "riscv: mm: notify remote harts about mmu cache updates"
Linus Torvalds [Fri, 17 Mar 2023 17:15:53 +0000 (10:15 -0700)]
Merge tag 's390-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Update defconfigs
- Fix early boot code by adding missing intersection check to prevent
potential overwriting of the ipl report
- Fix a use-after-free issue in s390-specific code related to PCI
resources being retained after hot-unplugging individual functions,
by removing the resources from the PCI bus's resource list and using
the zpci_bar_struct's resource pointer directly
* tag 's390-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
PCI: s390: Fix use-after-free of PCI resources with per-function hotplug
s390/ipl: add missing intersection check to ipl_report handling
Linus Torvalds [Fri, 17 Mar 2023 17:01:07 +0000 (10:01 -0700)]
Merge tag 'powerpc-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix false detection of read faults, introduced by execute-only
support
- Fix a build failure when GENERIC_ALLOCATOR is not selected
Thanks to Russell Currey, Randy Dunlap, Michal Suchánek, Nathan Lynch,
and Benjamin Gray.
* tag 'powerpc-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix false detection of read faults
powerpc/pseries: RTAS work area requires GENERIC_ALLOCATOR
Linus Torvalds [Fri, 17 Mar 2023 16:43:10 +0000 (09:43 -0700)]
Merge tag 'sound-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing surprising, a collection of small device-specific fixes.
The majority of changes are for ASoC Intel stuff, while a few other
ASoC and HD-audio fixes are found"
* tag 'sound-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits)
ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
ALSA: asihpi: check pao in control_message()
ASoC: hdmi-codec: only startup/shutdown on supported streams
ASoC: da7219: Initialize jack_det_mutex
ALSA: hda: Match only Intel devices with CONTROLLER_IN_GPU()
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro
ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform
ALSA: hda: intel-dsp-config: add MTL PCI id
ASoC: SOF: IPC4: update gain ipc msg definition to align with fw
ASoC: SOF: sof-audio: don't squelch errors in WIDGET_SETUP phase
ASoC: SOF: Intel: hda-ctrl: re-add sleep after entering and exiting reset
ASoC: SOF: Intel: hda-dsp: harden D0i3 programming sequence
ASoC: SOF: ipc4-topology: set dmic dai index from copier
ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP
ASoC: SOF: Intel: pci-tng: revert invalid bar size setting
ASoC: SOF: topology: Fix error handling in sof_widget_ready()
ASoC: Intel: soc-acpi: fix copy-paste issue in topology names
ASoC: SOF: ipc4-topology: Fix incorrect sample rate print unit
ASoC: SOF: ipc3: Check for upper size limit for the received message
ASOC: SOF: Intel: pci-tgl: Fix device description
...
Linus Torvalds [Fri, 17 Mar 2023 16:35:40 +0000 (09:35 -0700)]
Merge tag 'drm-fixes-2023-03-17' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Seems like a pretty regular rc3, i915 and amdgpu with the usual
selection of fixes, then a scattering of fixes across misc drivers and
other areas:
i915:
- Fix hwmon PL1 power limit enabling
- Fix audio ELD handling for DP MST
- Fix PSR io and wake line calculations
- Fix DG2 HDMI modes with 267.30 and 319.89 MHz pixel clocks
- Fix SSEU subslice out-of-bounds access
- Fix misuse of non-idle barriers as fence trackers
amdgpu:
- SMU 13 update
- RDNA2 suspend/resume fix when overclocking is enabled
- SRIOV VCN fixes
- HDCP suspend/resume fix
- Fix drm polling splat regression
- Fix dirty rectangle tracking for PSR
- Fix vangogh regression on certain BIOSes
- Misc display fixes
- Suspend/resume IOMMU regression fix
amdkfd:
- Fix BO offset for multi-VMA page migration
- Fix a possible double free
- Fix potential use after free
- Fix process cleanup on module exit
bridge:
- fix returned array size name documentation
fbdev:
- ref-counting fix for fbdev deferred I/O
virtio:
- dma sync fix
shmem-helper:
- error path fix
msm:
- shrinker blocking fix
panfrost:
- shrinker rpm fix
chipsfb:
- fix error code
meson:
- fix 1px pink line
- fix regulator interaction
sun4i:
- fix missing component unbind"
* tag 'drm-fixes-2023-03-17' of git://anongit.freedesktop.org/drm/drm: (38 commits)
drm/ttm: drop extra ttm_bo_put in ttm_bo_cleanup_refs
drm/amdgpu: Don't resume IOMMU after incomplete init
drm/amdkfd: Fixed kfd_process cleanup on module exit.
drm/amd/display: disconnect MPCC only on OTG change
drm/amd/display: Fix DP MST sinks removal issue
drm/amd/display: Do not set DRR on pipe Commit
drm/amd/display: Remove OTG DIV register write for Virtual signals.
drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion again
drm/bridge: Fix returned array size name for atomic_get_input_bus_fmts kdoc
drm/amdgpu/vcn: Disable indirect SRAM on Vangogh broken BIOSes
drm/amdgpu/nv: fix codec array for SR_IOV
drm/amd/display: Write to correct dirty_rect
drm/amdgpu: move poll enabled/disable into non DC path
drm/amd/display: Fix HDCP failing to enable after suspend
drm/amdkfd: fix potential kgd_mem UAFs
drm/amdgpu/vcn: custom video info caps for sriov
drm/amd/pm: Fix sienna cichlid incorrect OD volage after resume
drm/amd/pm: bump SMU 13.0.4 driver_if header version
drm/amdkfd: fix a potential double free in pqm_create_queue
drm/amdkfd: Get prange->offset after svm_range_vram_node_new
...
Linus Torvalds [Fri, 17 Mar 2023 16:30:57 +0000 (09:30 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten patches, eight in drivers and two in the core, which correct a
regression from directory removal and add a no VPD size quirk also to
fix a regression. All pretty small"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: mcq: Use active_reqs to check busy in clock scaling
scsi: core: Fix a procfs host directory removal regression
scsi: core: Add BLIST_NO_VPD_SIZE for some VDASD
scsi: mpi3mr: Fix expander node leak in mpi3mr_remove()
scsi: mpi3mr: Fix memory leaks in mpi3mr_init_ioc()
scsi: mpi3mr: Fix sas_hba.phy memory leak in mpi3mr_remove()
scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove()
scsi: mpi3mr: Fix config page DMA memory leak
scsi: mpi3mr: Fix throttle_groups memory leak
scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add()
Merge branches 'acpi-video', 'acpi-x86', 'acpi-tools' and 'acpi-docs'
Merge a new ACPI backlight quirk, new ACPI quirks for I2C device
enumeration on some platforms, a pfrut utility fix and an ACPI
documentation fix for 6.3-rc3:
- Add backlight=native DMI quirk for Dell Vostro 15 3535 to the ACPI
video driver (Chia-Lin Kao).
- Add ACPI quirks for I2C devices enumeration on Lenovo Yoga Book X90
and Acer Iconia One 7 B1-750 (Hans de Goede).
- Fix handling of invalid command line option values in the ACPI pfrut
utility (Chen Yu).
- Fix references to I2C device data type in the ACPI documentation for
device enumeration (Andy Shevchenko).
Antti Laakso [Wed, 25 Jan 2023 13:17:50 +0000 (15:17 +0200)]
tools/power turbostat: fix decoding of HWP_STATUS
The "excursion to minimum" information is in bit2
in HWP_STATUS MSR. Fix the bitmask used for
decoding the register.
Signed-off-by: Antti Laakso <antti.laakso@intel.com> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
David S. Miller [Fri, 17 Mar 2023 07:56:41 +0000 (07:56 +0000)]
Merge branch 'bonding-fixes'
Nikolay Aleksandrov says:
====================
bonding: properly restore flags when bond changes ether type
A bug was reported by syzbot[1] that causes a warning and a myriad of
other potential issues if a bond, that is also a slave, fails to enslave a
non-eth device. While fixing that bug I found that we have the same
issues when such enslave passes and after that the bond changes back to
ARPHRD_ETHER (again due to ether_setup). This set fixes all issues by
extracting the ether_setup() sequence in a helper which does the right
thing about bond flags when it needs to change back to ARPHRD_ETHER. It
also adds selftests for these cases.
Patch 01 adds the new bond_ether_setup helper and fixes the issues when a
bond device changes its ether type due to successful enslave. Patch 02
fixes the issues when it changes its ether type due to an unsuccessful
enslave. Note we need two patches because the bugs were introduced by
different commits. Patch 03 adds the new selftests.
Due to the comment adjustment and squash, could you please review
patch 01 again? I've kept the other acks since there were no code
changes.
v3: squash the helper patch and the first fix, adjust the comment above
it to be explicit about the bond device, no code changes
v2: new set, all patches are new due to new approach of fixing these bugs
selftests: bonding: add tests for ether type changes
Add new network selftests for the bonding device which exercise the ether
type changing call paths. They also test for the recent syzbot bug[1] which
causes a warning and results in wrong device flags (IFF_SLAVE missing).
The test adds three bond devices and a nlmon device, enslaves one of the
bond devices to the other and then uses the nlmon device for successful
and unsuccesful enslaves both of which change the bond ether type. Thus
we can test for both MASTER and SLAVE flags at the same time.
If the flags are properly restored we get:
TEST: Change ether type of an enslaved bond device with unsuccessful enslave [ OK ]
TEST: Change ether type of an enslaved bond device with successful enslave [ OK ]
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
syzbot reported a warning[1] where the bond device itself is a slave and
we try to enslave a non-ethernet device as the first slave which fails
but then in the error path when ether_setup() restores the bond device
it also clears all flags. In my previous fix[2] I restored the
IFF_MASTER flag, but I didn't consider the case that the bond device
itself might also be a slave with IFF_SLAVE set, so we need to restore
that flag as well. Use the bond_ether_setup helper which does the right
thing and restores the bond's flags properly.
Steps to reproduce using a nlmon dev:
$ ip l add nlmon0 type nlmon
$ ip l add bond1 type bond
$ ip l add bond2 type bond
$ ip l set bond1 master bond2
$ ip l set dev nlmon0 master bond1
$ ip -d l sh dev bond1
22: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noqueue master bond2 state DOWN mode DEFAULT group default qlen 1000
(now bond1's IFF_SLAVE flag is gone and we'll hit a warning[3] if we
try to delete it)
Fixes: 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure") Reported-by: syzbot+9dfc3f3348729cc82277@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
Add bond_ether_setup helper which is used to fix ether_setup() calls in the
bonding driver. It takes care of both IFF_MASTER and IFF_SLAVE flags, the
former is always restored and the latter only if it was set.
If the bond enslaves non-ARPHRD_ETHER device (changes its type), then
releases it and enslaves ARPHRD_ETHER device (changes back) then we
use ether_setup() to restore the bond device type but it also resets its
flags and removes IFF_MASTER and IFF_SLAVE[1]. Use the bond_ether_setup
helper to restore both after such transition.
[1] reproduce (nlmon is non-ARPHRD_ETHER):
$ ip l add nlmon0 type nlmon
$ ip l add bond2 type bond mode active-backup
$ ip l set nlmon0 master bond2
$ ip l set nlmon0 nomaster
$ ip l add bond1 type bond
(we use bond1 as ARPHRD_ETHER device to restore bond2's mode)
$ ip l set bond1 master bond2
$ ip l sh dev bond2
37: bond2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether be:d7:c5:40:5b:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
(notice bond2's IFF_MASTER is missing)
Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
If the RX descriptor doesn't have any data, the output value of quote
from rswitch_rx() will be increased unexpectedily. So, fix it.
Reported-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com> Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Liang He [Wed, 15 Mar 2023 06:00:21 +0000 (14:00 +0800)]
ethernet: sun: add check for the mdesc_grab()
In vnet_port_probe() and vsw_port_probe(), we should
check the return value of mdesc_grab() as it may
return NULL which can caused NPD bugs.
Fixes: 5d01fa0c6bd8 ("ldmvsw: Add ldmvsw.c driver code") Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Christian König [Thu, 16 Mar 2023 07:26:47 +0000 (08:26 +0100)]
drm/ttm: drop extra ttm_bo_put in ttm_bo_cleanup_refs
That was accidentially left over when we switched to the delayed delete
worker.
Suggested-by: Matthew Auld <matthew.william.auld@gmail.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 9bff18d13473 ("drm/ttm: use per BO cleanup workers") Reported-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316072647.406707-1-christian.koenig@amd.com
Jakub Kicinski [Fri, 17 Mar 2023 04:33:20 +0000 (21:33 -0700)]
Merge branch 'net-ipa-minor-bug-fixes'
Alex Elder says:
====================
net: ipa: minor bug fixes
The four patches in this series fix some errors, though none of them
cause any compile or runtime problems.
The first changes the files included by "drivers/net/ipa/reg.h" to
ensure everything it requires is included with the file. It also
stops unnecessarily including another file. The prerequisites are
apparently satisfied other ways, currently.
The second adds two struct declarations to "gsi_reg.h", to ensure
they're declared before they're used later in the file. Again, it
seems these declarations are currently resolved wherever this file
is included.
The third removes register definitions that were added for IPA v5.0
that are not needed. And the last updates some validity checks for
IPA v5.0 registers. No IPA v5.0 platforms are yet supported, so the
issues resolved here were never harmful.
Versions 2 and 3 of this series change the "Fixes" tags in patches
so they supply legitimate commit hashes.
====================
Alex Elder [Thu, 16 Mar 2023 14:51:36 +0000 (09:51 -0500)]
net: ipa: fix some register validity checks
A recent commit defined HW_PARAM_4 as a GSI register ID but did not
add it to gsi_reg_id_valid() to indicate it's valid (for IPA v5.0+).
Add version checks for the HW_PARAM_2 and INTER_EE IRQ GSI registers
there as well.
IPA v5.0 supports up to 8 source and destination resource groups.
Update the validity check (and the comments where the register IDs
are defined) to reflect that. Similarly update comments and
validity checks for the hash/cache-related registers.
Note that this patch fixes an omission and constrains things
further, but these don't technically represent bugs.
Fixes: f651334e1ef5 ("net: ipa: add HW_PARAM_4 GSI register") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 16 Mar 2023 14:51:35 +0000 (09:51 -0500)]
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
A recent commit defined a few IPA registers used for IPA v5.0+.
One of those was a mistake. Although the filter and router caches
get *flushed* using a single register, they use distinct registers
(ENDP_FILTER_CACHE_CFG and ENDP_ROUTER_CACHE_CFG) for configuration.
And although there *exists* a FILT_ROUT_CACHE_CFG register, it is
not needed in upstream code. So get rid of definitions related to
FILT_ROUT_CACHE_CFG, because they are not needed.
Fixes: 8ba59716d16a ("net: ipa: define IPA v5.0+ registers") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 16 Mar 2023 14:51:34 +0000 (09:51 -0500)]
net: ipa: add two missing declarations
When gsi_reg_init() got added, its declaration was added to
"gsi_reg.h" without declaring the two struct pointer types it uses.
Add these struct declarations to "gsi_reg.h".
Fixes: 3c506add35c7 ("net: ipa: introduce gsi_reg_init()") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 16 Mar 2023 14:51:33 +0000 (09:51 -0500)]
net: ipa: reg: include <linux/bug.h>
When "reg.h" got created, it included calls to WARN() and WARN_ON().
Those macros are defined via <linux/bug.h>. In addition, it uses
is_power_of_2(), which is defined in <linux/log2.h>. Include those
files so IPA "reg.h" has access to all definitions it requires.
Meanwhile, <linux/bits.h> is included but nothing defined therein
is required directly in "reg.h", so get rid of that.
Fixes: 81772e444dbe ("net: ipa: start generalizing "ipa_reg"") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 16 Mar 2023 22:02:34 +0000 (15:02 -0700)]
net: xdp: don't call notifiers during driver init
Drivers will commonly perform feature setting during init, if they use
the xdp_set_features_flag() helper they'll likely run into an ASSERT_RTNL()
inside call_netdevice_notifiers_info().
Don't call the notifier until the device is actually registered.
Nothing should be tracking the device until its registered and
after its unregistration has started.
====================
net/sched: fix parsing of TCA_EXT_WARN_MSG for tc action
In my previous commit 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's rever the previous fix 923b2e30dc9c ("net/sched: act_api: move
TCA_EXT_WARN_MSG to the correct hierarchy") and add a new
TCA_ROOT_EXT_WARN_MSG for tc action specifically.
Here is the tdc test result:
1..1119
ok 1 d959 - Add cBPF action with valid bytecode
ok 2 f84a - Add cBPF action with invalid bytecode
ok 3 e939 - Add eBPF action with valid object-file
ok 4 282d - Add eBPF action with invalid object-file
ok 5 d819 - Replace cBPF bytecode and action control
ok 6 6ae3 - Delete cBPF action
ok 7 3e0d - List cBPF actions
ok 8 55ce - Flush BPF actions
ok 9 ccc3 - Add cBPF action with duplicate index
ok 10 89c7 - Add cBPF action with invalid index
[...]
ok 1115 2348 - Show TBF class
ok 1116 84a0 - Create TEQL with default setting
ok 1117 7734 - Create TEQL with multiple device
ok 1118 34a9 - Delete TEQL with valid handle
ok 1119 6289 - Show TEQL stats
====================
Hangbin Liu [Thu, 16 Mar 2023 03:37:53 +0000 (11:37 +0800)]
net/sched: act_api: add specific EXT_WARN_MSG for tc action
In my previous commit 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this
param before going to the TCA_ACT_TAB nest.
Fixes: 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is not a correct fix as TCA_EXT_WARN_MSG is not a hierarchy to
TCA_ACT_TAB. I didn't notice the TC actions use different enum when adding
TCA_EXT_WARN_MSG. To fix the difference I will add a new WARN enum in
TCA_ROOT_MAX as Jamal suggested.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek Vasut [Wed, 15 Mar 2023 23:19:16 +0000 (01:19 +0200)]
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
The blamed commit has replaced a ksz_write8() call to address
REG_PORT_5_CTRL_6 (0x56) with a ksz_set_xmii() -> ksz_pwrite8() call to
regs[P_XMII_CTRL_1], which is also defined as 0x56 for ksz8795_regs[].
The trouble is that, when compared to ksz_write8(), ksz_pwrite8() also
adjusts the register offset with the port base address. So in reality,
ksz_pwrite8(offset=0x56) accesses register 0x56 + 0x50 = 0xa6, which in
this switch appears to be unmapped, and the RGMII delay configuration on
the CPU port does nothing.
So if the switch wasn't fine with the RGMII delay configuration done
through pin strapping and relied on Linux to apply a different one in
order to pass traffic, this is now broken.
Using the offset translation logic imposed by ksz_pwrite8(), the correct
value for regs[P_XMII_CTRL_1] should have been 0x6 on ksz8795_regs[], in
order to really end up accessing register 0x56.
Static code analysis shows that, despite there being multiple other
accesses to regs[P_XMII_CTRL_1] in this driver, the only code path that
is applicable to ksz8795_regs[] and ksz8_dev_ops is ksz_set_xmii().
Therefore, the problem is isolated to RGMII delays.
In its current form, ksz8795_regs[] contains the same value for
P_XMII_CTRL_0 and for P_XMII_CTRL_1, and this raises valid suspicions
that writes made by the driver to regs[P_XMII_CTRL_0] might overwrite
writes made to regs[P_XMII_CTRL_1] or vice versa.
Again, static analysis shows that the only accesses to P_XMII_CTRL_0
from the driver are made from code paths which are not reachable with
ksz8_dev_ops. So the accesses made by ksz_set_xmii() are safe for this
switch family.
[ vladimiroltean: rewrote commit message ]
Fixes: c476bede4b0f ("net: dsa: microchip: ksz8795: use common xmii function") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230315231916.2998480-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 15 Mar 2023 23:03:51 +0000 (16:03 -0700)]
ynl: make the tooling check the license
The (only recently documented) expectation is that all specs
are under a certain license, but we don't actually enforce it.
What's worse we then go ahead and assume the license was right,
outputting the expected license into generated files.
Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 15 Mar 2023 23:03:50 +0000 (16:03 -0700)]
ynl: broaden the license even more
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <chuck.lever@oracle.com> Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 15 Mar 2023 23:03:49 +0000 (16:03 -0700)]
tools: ynl: make definitions optional again
definitions are optional, commit in question breaks cli for ethtool.
Fixes: 6517a60b0307 ("tools: ynl: move the enum classes to shared code") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 17 Mar 2023 04:13:05 +0000 (21:13 -0700)]
Merge tag 'mlx5-fixes-2023-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-03-15
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: TC, Remove error message log print
net/mlx5e: TC, fix cloned flow attribute
net/mlx5e: TC, fix missing error code
net/sched: TC, fix raw counter initialization
net/mlx5e: Lower maximum allowed MTU in XSK to match XDP prerequisites
net/mlx5: Set BREAK_FW_WAIT flag first when removing driver
net/mlx5e: kTLS, Fix missing error unwind on unsupported cipher type
net/mlx5e: Fix cleanup null-ptr deref on encap lock
net/mlx5: E-switch, Fix missing set of split_count when forward to ovs internal port
net/mlx5: E-switch, Fix wrong usage of source port rewrite in split rules
net/mlx5: Disable eswitch before waiting for VF pages
net/mlx5: Fix setting ec_function bit in MANAGE_PAGES
net/mlx5e: Don't cache tunnel offloads capability
net/mlx5e: Fix macsec ASO context alignment
====================
Matthieu Baerts [Wed, 15 Mar 2023 20:25:17 +0000 (21:25 +0100)]
hsr: ratelimit only when errors are printed
Recently, when automatically merging -net and net-next in MPTCP devel
tree, our CI reported [1] a conflict in hsr, the same as the one
reported by Stephen in netdev [2].
When looking at the conflict, I noticed it is in fact the v1 [3] that
has been applied in -net and the v2 [4] in net-next. Maybe the v1 was
applied by accident.
As mentioned by Jakub Kicinski [5], the new condition makes more sense
before the net_ratelimit(), not to update net_ratelimit's state which is
unnecessary if we're not going to print either way.
Here, this modification applies the v2 but in -net.
Dave Airlie [Fri, 17 Mar 2023 02:03:57 +0000 (12:03 +1000)]
Merge tag 'drm-intel-fixes-2023-03-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v6.3-rc3:
- Fix hwmon PL1 power limit enabling
- Fix audio ELD handling for DP MST
- Fix PSR io and wake line calculations
- Fix DG2 HDMI modes with 267.30 and 319.89 MHz pixel clocks
- Fix SSEU subslice out-of-bounds access
- Fix misuse of non-idle barriers as fence trackers
Po-Hsu Lin [Wed, 15 Mar 2023 16:53:53 +0000 (00:53 +0800)]
selftests: net: devlink_port_split.py: skip test if no suitable device available
The `devlink -j port show` command output may not contain the "flavour"
key, an example from Ubuntu 22.10 s390x LPAR(5.19.0-37-generic), with
mlx4 driver and iproute2-5.15.0:
{"port":{"pci/0001:00:00.0/1":{"type":"eth","netdev":"ens301"},
"pci/0001:00:00.0/2":{"type":"eth","netdev":"ens301d1"},
"pci/0002:00:00.0/1":{"type":"eth","netdev":"ens317"},
"pci/0002:00:00.0/2":{"type":"eth","netdev":"ens317d1"}}}
This will cause a KeyError exception.
Create a validate_devlink_output() to check for this "flavour" from
devlink command output to avoid this KeyError exception. Also let
it handle the check for `devlink -j dev show` output in main().
Apart from this, if the test was not started because the max lanes of
the designated device is 0. The script will still return 0 and thus
causing a false-negative test result.
Use a found_max_lanes flag to determine if these tests were skipped
due to this reason and return KSFT_SKIP to make it more clear.
Alexandra Winter [Wed, 15 Mar 2023 13:14:35 +0000 (14:14 +0100)]
net/iucv: Fix size of interrupt data
iucv_irq_data needs to be 4 bytes larger.
These bytes are not used by the iucv module, but written by
the z/VM hypervisor in case a CPU is deconfigured.
Reported as:
BUG dma-kmalloc-64 (Not tainted): kmalloc Redzone overwritten
-----------------------------------------------------------------------------
0x0000000000400564-0x0000000000400567 @offset=1380. First byte 0x80 instead of 0xcc
Allocated in iucv_cpu_prepare+0x44/0xd0 age=167839 cpu=2 pid=1
__kmem_cache_alloc_node+0x166/0x450
kmalloc_node_trace+0x3a/0x70
iucv_cpu_prepare+0x44/0xd0
cpuhp_invoke_callback+0x156/0x2f0
cpuhp_issue_call+0xf0/0x298
__cpuhp_setup_state_cpuslocked+0x136/0x338
__cpuhp_setup_state+0xf4/0x288
iucv_init+0xf4/0x280
do_one_initcall+0x78/0x390
do_initcalls+0x11a/0x140
kernel_init_freeable+0x25e/0x2a0
kernel_init+0x2e/0x170
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
Freed in iucv_init+0x92/0x280 age=167839 cpu=2 pid=1
__kmem_cache_free+0x308/0x358
iucv_init+0x92/0x280
do_one_initcall+0x78/0x390
do_initcalls+0x11a/0x140
kernel_init_freeable+0x25e/0x2a0
kernel_init+0x2e/0x170
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
Slab 0x0000037200010000 objects=32 used=30 fp=0x0000000000400640 flags=0x1ffff00000010200(slab|head|node=0|zone=0|
Object 0x0000000000400540 @offset=1344 fp=0x0000000000000000
Redzone 0000000000400500: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400510: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400520: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400530: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 0000000000400540: 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00 00 ................
Object 0000000000400550: f3 86 81 f2 f4 82 f8 82 f0 f0 f0 f0 f0 f0 f0 f2 ................
Object 0000000000400560: 00 00 00 00 80 00 00 00 cc cc cc cc cc cc cc cc ................
Object 0000000000400570: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400580: cc cc cc cc cc cc cc cc ........
Padding 00000000004005d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
Padding 00000000004005e4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
Padding 00000000004005f4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
CPU: 6 PID: 121030 Comm: 116-pai-crypto. Not tainted 6.3.0-20230221.rc0.git4.99b8246b2d71.300.fc37.s390x+debug #1
Hardware name: IBM 3931 A01 704 (z/VM 7.3.0)
Call Trace:
[<000000032aa034ec>] dump_stack_lvl+0xac/0x100
[<0000000329f5a6cc>] check_bytes_and_report+0x104/0x140
[<0000000329f5aa78>] check_object+0x370/0x3c0
[<0000000329f5ede6>] free_debug_processing+0x15e/0x348
[<0000000329f5f06a>] free_to_partial_list+0x9a/0x2f0
[<0000000329f5f4a4>] __slab_free+0x1e4/0x3a8
[<0000000329f61768>] __kmem_cache_free+0x308/0x358
[<000000032a91465c>] iucv_cpu_dead+0x6c/0x88
[<0000000329c2fc66>] cpuhp_invoke_callback+0x156/0x2f0
[<000000032aa062da>] _cpu_down.constprop.0+0x22a/0x5e0
[<0000000329c3243e>] cpu_device_down+0x4e/0x78
[<000000032a61dee0>] device_offline+0xc8/0x118
[<000000032a61e048>] online_store+0x60/0xe0
[<000000032a08b6b0>] kernfs_fop_write_iter+0x150/0x1e8
[<0000000329fab65c>] vfs_write+0x174/0x360
[<0000000329fab9fc>] ksys_write+0x74/0x100
[<000000032aa03a5a>] __do_syscall+0x1da/0x208
[<000000032aa177b2>] system_call+0x82/0xb0
INFO: lockdep is turned off.
FIX dma-kmalloc-64: Restoring kmalloc Redzone 0x0000000000400564-0x0000000000400567=0xcc
FIX dma-kmalloc-64: Object at 0x0000000000400540 not freed
net: atlantic: Fix crash when XDP is enabled but no program is loaded
The aq_xdp_run_prog() function falls back to the XDP_ABORTED action
handler (using a goto) if the operations for any of the other actions fail.
The XDP_ABORTED handler in turn calls the bpf_warn_invalid_xdp_action()
tracepoint. However, the function also jumps into the XDP_PASS helper if no
XDP program is loaded on the device, which means the XDP_ABORTED handler
can be run with a NULL program pointer. This results in a NULL pointer
deref because the tracepoint dereferences the 'prog' pointer passed to it.
This situation can happen in multiple ways:
- If a packet arrives between the removal of the program from the interface
and the static_branch_dec() in aq_xdp_setup()
- If there are multiple devices using the same driver in the system and
one of them has an XDP program loaded and the other does not.
Fix this by refactoring the aq_xdp_run_prog() function to remove the 'goto
pass' handling if there is no XDP program loaded. Instead, factor out the
skb building in a separate small helper function.
Szymon Heidrich [Thu, 16 Mar 2023 11:05:40 +0000 (12:05 +0100)]
net: usb: smsc75xx: Move packet length check to prevent kernel panic in skb_pull
Packet length check needs to be located after size and align_count
calculation to prevent kernel panic in skb_pull() in case
rx_cmd_a & RX_CMD_A_RED evaluates to true.
Ido Schimmel [Wed, 15 Mar 2023 12:40:09 +0000 (14:40 +0200)]
ipv4: Fix incorrect table ID in IOCTL path
Commit f96a3d74554d ("ipv4: Fix incorrect route flushing when source
address is deleted") started to take the table ID field in the FIB info
structure into account when determining if two structures are identical
or not. This field is initialized using the 'fc_table' field in the
route configuration structure, which is not set when adding a route via
IOCTL.
The above can result in user space being able to install two identical
routes that only differ in the table ID field of their associated FIB
info.
Fix by initializing the table ID field in the route configuration
structure in the IOCTL path.
Before the fix:
# ip route add default via 192.0.2.2
# route add default gw 192.0.2.2
# ip -4 r show default
# default via 192.0.2.2 dev dummy10
# default via 192.0.2.2 dev dummy10
After the fix:
# ip route add default via 192.0.2.2
# route add default gw 192.0.2.2
SIOCADDRT: File exists
# ip -4 r show default
default via 192.0.2.2 dev dummy10
Audited the code paths to ensure there are no other paths that do not
properly initialize the route configuration structure when installing a
route.
1) Fix an information leak when dumping algos and encap.
From Herbert Xu
2) Allow transport-mode states with AF_UNSPEC selector
to allow for nested transport-mode states.
From Herbert Xu.
* tag 'ipsec-2023-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Allow transport-mode states with AF_UNSPEC selector
xfrm: Zero padding when dumping algos and encap
====================
====================
net: renesas: set 'mac_managed_pm' at probe time
When suspending/resuming an interface which was not up, we saw mdiobus
related PM handling despite 'mac_managed_pm' being set for RAVB/SH_ETH.
Heiner kindly suggested the fix to set this flag at probe time, not at
init/open time. I implemented his suggestion and it works fine on these
two Renesas drivers.
====================
Wolfram Sang [Wed, 15 Mar 2023 07:41:15 +0000 (08:41 +0100)]
sh_eth: avoid PHY being resumed when interface is not up
SH_ETH doesn't need mdiobus suspend/resume, that's why it sets
'mac_managed_pm'. However, setting it needs to be moved from init to
probe, so mdiobus PM functions will really never be called (e.g. when
the interface is not up yet during suspend/resume).
Fixes: 6a1dbfefdae4 ("net: sh_eth: Fix PHY state warning splat during system resume") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wolfram Sang [Wed, 15 Mar 2023 07:41:14 +0000 (08:41 +0100)]
ravb: avoid PHY being resumed when interface is not up
RAVB doesn't need mdiobus suspend/resume, that's why it sets
'mac_managed_pm'. However, setting it needs to be moved from init to
probe, so mdiobus PM functions will really never be called (e.g. when
the interface is not up yet during suspend/resume).
Fixes: 4924c0cdce75 ("net: ravb: Fix PHY state warning splat during system resume") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 16 Mar 2023 22:06:16 +0000 (15:06 -0700)]
Merge tag '6.3-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Seven cifs/smb3 client fixes, all also for stable:
- four DFS fixes
- multichannel reconnect fix
- fix smb1 stats for cancel command
- fix for set file size error path"
* tag '6.3-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: use DFS root session instead of tcon ses
cifs: return DFS root session id in DebugData
cifs: fix use-after-free bug in refresh_cache_worker()
cifs: set DFS root session in cifs_get_smb_ses()
cifs: generate signkey for the channel that's reconnecting
cifs: Fix smb2_set_path_size()
cifs: Move the in_send statistic to __smb_send_rqst()
projects / mirror_ubuntu-kernels.git / log