In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Guenter Roeck [Mon, 18 Jun 2018 16:21:46 +0000 (09:21 -0700)]
hwmon: (nct6775) Fix comment in the description of pwm_mode
Commit 415eb2a1aaa488 ("hwmon: (nct6775) Fix writing pwmX_mode") changed
the definition of the pwm_mode variable, but did not update the comment
describing it.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/pti updates from Thomas Gleixner:
"Two small fixes correcting the handling of SSB mitigations on AMD
processors"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix the AMD SSBD usage of the SPEC_CTRL MSR
x86/bugs: Update when to check for the LS_CFG SSBD mitigation
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Prevent an out-of-bounds access in mtrr_write()
- Break a circular dependency in the new hyperv IPI acceleration code
- Address the build breakage related to inline functions by enforcing
gnu_inline and explicitly bringing native_save_fl() out of line,
which also adds a set of _ARM_ARG macros which provide 32/64bit
safety.
- Initialize the shadow CR4 per cpu variable before using it.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Don't copy out-of-bounds data in mtrr_write
x86/hyper-v: Fix the circular dependency in IPI enlightenment
x86/paravirt: Make native_save_fl() extern inline
x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h>
compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations
x86/mm/32: Initialize the CR4 shadow before __flush_tlb_all()
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
- The hopefully final fix for the reported race problems in
kthread_parkme(). The previous attempt still left a hole and was
partially wrong.
- Plug a race in the remote tick mechanism which triggers a warning
about updates not being done correctly. That's a false positive if
the race condition is hit as the remote CPU is idle. Plug it by
checking the condition again when holding run queue lock.
- Fix a bug in the utilization estimation of a run queue which causes
the estimation to be 0 when a run queue is throttled.
- Advance the global expiration of the period timer when the timer is
restarted after a idle period. Otherwise the expiry time is stale and
the timer fires prematurely.
- Cure the drift between the bandwidth timer and the runqueue
accounting, which leads to bogus throttling of runqueues
- Place the call to cpufreq_update_util() correctly so the function
will observe the correct number of running RT tasks and not a stale
one.
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kthread, sched/core: Fix kthread_parkme() (again...)
sched/util_est: Fix util_est_dequeue() for throttled cfs_rq
sched/fair: Advance global expiration when period timer is restarted
sched/fair: Fix bandwidth timer clock drift condition
sched/rt: Fix call to cpufreq_update_util()
sched/nohz: Skip remote tick on idle task entirely
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single fix for objtool to address a bug in handling the cold
subfunction detection for aliased functions which was added recently.
The bug causes objtool to enter an infinite loop"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Support GCC 8 '-fnoreorder-functions'
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- add missing RETs in x86 aegis/morus
- fix build error in arm speck
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86 - Add missing RETs
crypto: arm/speck - fix building in Thumb2 mode
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes for ext4; most of which relate to vulnerabilities where a
maliciously crafted file system image can result in a kernel OOPS or
hang.
At least one fix addresses an inline data bug could be triggered by
userspace without the need of a crafted file system (although it does
require that the inline data feature be enabled)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: check superblock mapped prior to committing
ext4: add more mount time checks of the superblock
ext4: add more inode number paranoia checks
ext4: avoid running out of journal credits when appending to an inline file
jbd2: don't mark block as modified if the handle is out of credits
ext4: never move the system.data xattr out of the inode body
ext4: clear i_data in ext4_inode_info when removing inline data
ext4: include the illegal physical block in the bad map ext4_error msg
ext4: verify the depth of extent tree in ext4_find_extent()
ext4: only look at the bg_flags field if it is valid
ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
ext4: always check block group bounds in ext4_init_block_bitmap()
ext4: always verify the magic number in xattr blocks
ext4: add corruption check in ext4_xattr_set_entry()
ext4: add warn_on_error mount option
Merge tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix a use-after-free in the endpoint code (Dan Carpenter)
- Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven)
- Fix an nfp regression caused by a change in how we limit the number
of VFs we can enable (Jakub Kicinski)
- Fix failure path cleanup issues in the new R-Car gen3 PHY support
(Marek Vasut)
- Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc
Guire)
* tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
nfp: stop limiting VFs to 0
PCI/IOV: Reset total_VFs limit after detaching PF driver
PCI: faraday: Add missing of_node_put()
PCI: xilinx-nwl: Add missing of_node_put()
PCI: xilinx: Add missing of_node_put()
PCI: endpoint: Use after free in pci_epf_unregister_driver()
PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
PCI: rcar: Clean up PHY init on failure
PCI: rcar: Shut the PHY down in failpath
Merge tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Five smb3/cifs fixes for stable (including for some leaks and memory
overwrites) and also a few fixes for recent regressions in packet
signing.
Additional testing at the recent SMB3 test event, and some good work
by Paulo and others spotted the issues fixed here. In addition to my
xfstest runs on these, Aurelien and Stefano did additional test runs
to verify this set"
* tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf()
cifs: Fix infinite loop when using hard mount option
cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting
cifs: Fix memory leak in smb2_set_ea()
cifs: fix SMB1 breakage
cifs: Fix validation of signed data in smb2
cifs: Fix validation of signed data in smb3+
cifs: Fix use after free of a mid_q_entry
Merge tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Revert an incorrect dma-mapping commit for 4.18-rc"
* tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mapping:
Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"
Merge tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"We have few odd driver fixes and one email update change for you this
time:
- Driver fixes for k3dma (off by one), pl330 (burst residue
granularity) and omap-dma (incorrect residue_granularity)
- Sinan's email update"
* tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()
dmaengine: pl330: report BURST residue granularity
MAINTAINERS: Update email-id of Sinan Kaya
dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
Merge tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"A couple of small fixes: one to the BMC side of things that fixes an
interrupt issue, and one oops fix if init fails in a certain way on
the client driver"
* tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc: fix IRQ exception if the channel is not open
ipmi: Cleanup oops on initialization failure
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 LDFLAGS clean-up from Catalin Marinas:
- use aarch64elf instead of aarch64linux
- move endianness options to LDFLAGS instead from LD
- remove no-op '-p' linker flag
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: remove no-op -p linker flag
arm64: add endianness option to LDFLAGS instead of LD
arm64: Use aarch64elf and aarch64elfb emulation mode variants
x86/mtrr: Don't copy out-of-bounds data in mtrr_write
Don't access the provided buffer out of bounds - this can cause a kernel
out-of-bounds read when invoked through sys_splice() or other things that
use kernel_write()/__kernel_write().
Fixes: 7f8ec5a4f01a ("x86/mtrr: Convert to use strncpy_from_user() helper") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180706215003.156702-1-jannh@google.com
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"The usual collection of driver fixlets:
- build cleanup/fix for the sunxi makefile that tried to save size
but failed and prevented dead code elimination from working
- two Davinci clk driver fixes for a typo causing build failures in
different configurations and an error check that checks the wrong
variable.
- undo the DT ABI breaking imx6ul binding header shuffle that got
merged this cycle"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
dt-bindings: clock: imx6ul: Do not change the clock definition order
clk: davinci: fix a typo (which leads to build failures)
clk: davinci: cfgchip: testing the wrong variable
clk: sunxi-ng: replace lib-y with obj-y
Merge tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Make vfio-pci IGD extensions optional via Kconfig (Alex Williamson)
- Remove unused and soon to be removed map_atomic callback from mbochs
sample driver, add unmap callback to avoid dmabuf leaks (Gerd
Hoffmann)
- Fix usage of get_user_pages_longterm() (Jason Gunthorpe)
- Fix sample mbochs driver vm_operations_struct.fault return type
(Souptick Joarder)
* tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfio:
sample/vfio-mdev: Change return type to vm_fault_t
vfio: Use get_user_pages_longterm correctly
sample/mdev/mbochs: add mbochs_kunmap_dmabuf
sample/mdev/mbochs: remove mbochs_kmap_atomic_dmabuf
vfio/pci: Make IGD support a configurable option
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"A few more changes for v4.18:
- wire up the two new system calls io_pgetevents and rseq
- fix a register corruption in the expolines code for machines
without EXRL
- drastically reduce the memory utilization of the dasd driver
- fix reference counting for KVM page table pages"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up rseq system call
s390: wire up io_pgetevents system call
s390/mm: fix refcount usage for 4K pgste
s390/dasd: reduce the default queue depth and nr of hardware queues
s390: Correct register corruption in critical section cleanup
x86/hyper-v: Fix the circular dependency in IPI enlightenment
The IPI hypercalls depend on being able to map the Linux notion of CPU ID
to the hypervisor's notion of the CPU ID. The array hv_vp_index[] provides
this mapping. Code for populating this array depends on the IPI functionality.
Break this circular dependency.
[ tglx: Use a proper define instead of '-1' with a u32 variable as pointed
out by Vitaly ]
Fixes: 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments") Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mikelley@microsoft.com> Cc: gregkh@linuxfoundation.org Cc: devel@linuxdriverproject.org Cc: olaf@aepfle.de Cc: apw@canonical.com Cc: jasowang@redhat.com Cc: hpa@zytor.com Cc: sthemmin@microsoft.com Cc: Michael.H.Kelley@microsoft.com Cc: vkuznets@redhat.com Link: https://lkml.kernel.org/r/20180703230155.15160-1-kys@linuxonhyperv.com
Merge tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the drm fixes for rc4.
It's a bit larger than I'd like but the exynos cleanups are pretty
mechanical, and I'd rather have them in sooner rather than later so we
can avoid too much conflicts around them. The non-mechanincal exynos
changes are mostly fixes for new feature recently introduced.
Apart from the exynos updates, we have:
i915:
- GVT and GGTT mapping fixes
amdgpu:
- fix HDMI2.0 4K@60 Hz regression
- Hotplug fixes for dual-GPU laptops to make power management better
- misc vega12 bios fixes, a race fix and some typos.
sii8620 bridge:
- small fixes around mode setting
core:
- use kvzalloc to allocate blob property memory"
* tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/amd/display: add a check for display depth validity
drm/amd/display: adding ycbcr420 pixel encoding for hdmi
drm/udl: fix display corruption of the last line
drm/bridge/sii8620: Fix link mode selection
drm/bridge/sii8620: Fix display of packed pixel modes
drm/bridge/sii8620: Send AVI infoframe in all MHL versions
drm/amdgpu: fix user fence write race condition
drm/i915: Try GGTT mmapping whole object as partial
drm/amdgpu/pm: fix display count in non-DC path
drm/amdgpu: fix swapped emit_ib_size in vce3
drm: Use kvzalloc for allocating blob property memory
drm/i915/gvt: changed DDI mode emulation type
drm/i915/gvt: fix a bug of partially write ggtt enties
drm/exynos: Replace drm_dev_unref with drm_dev_put
drm/exynos: Replace drm_gem_object_unreference_unlocked with put function
drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functions
drm/exynos: ipp: use correct enum type
drm/exynos: decon5433: Fix WINCONx reset value
drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes
drm/exynos: fimc: Use real buffer width for configuring the hardware
...
Merge tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes and cleanups from Steven Rostedt:
"While cleaning out my INBOX, I found a few patches that were lost in
the noise. These are minor bug fixes and clean ups. Those include:
- avoid a string overflow
- code that didn't match the comment (but should)
- a small code optimization (use of a conditional)
- quiet printf warnings
- nuke unused code
- fix function graph interrupt annotation"
* tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix missing return symbol in function_graph output
ftrace: Nuke clear_ftrace_function
tracing: Use __printf markup to silence compiler
tracing: Optimize trace_buffer_iter() logic
tracing: Make create_filter() code match the comments
tracing: Avoid string overflow
Dave Airlie [Fri, 6 Jul 2018 00:46:58 +0000 (10:46 +1000)]
Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Fixups
- Fix several problems to IPPv2 merged to mainline recentely.
. An align problem of width size that IPP driver incorrectly
calculated the real buffer size.
. Horizontal and vertical flip problem.
. Per-plane global alpha for XRGB modes.
. Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
. The stange order of overlapping planes on XRGB modes
by setting global alpha value to maximum value.
Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
. it replaces several reference/unreference functions with Linux
kernel nameing standard.
Dave Airlie [Fri, 6 Jul 2018 00:44:35 +0000 (10:44 +1000)]
Merge branch 'drm-fixes-4.18' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- Fix an HDMI 2.0 4k@60 regression
- Hotplug fixes for PX/HG laptops
- Fixes for vbios changes in vega12
- Fix a race in the user fence code
- Fix a couple of misc typos
Olof Johansson [Thu, 5 Jul 2018 21:59:20 +0000 (14:59 -0700)]
Merge tag 'omap-for-v4.18/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omap for v4.18-rc cycle
Few dts fixes for regressions for various SoCs and
devices for touchscreen wake, dra7 USB quirk, pinmux
for beaglebone mmc, and emac clock.
Also included is a change for ti-sysc to use kcalloc
that Kees wanted to get into v4.18 as that's the last
one he wanted to fix for improved defense against
allocation overflows.
* tag 'omap-for-v4.18/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3: Fix am3517 mdio and emac clock references
ARM: dts: am335x-bone-common: Fix mmc0 Write Protect
bus: ti-sysc: Use 2-factor allocator arguments
ARM: dts: dra7: Disable metastability workaround for USB2
ARM: dts: am437x: make edt-ft5x06 a wakeup source
sgid directories have special semantics, making newly created files in
the directory belong to the group of the directory, and newly created
subdirectories will also become sgid. This is historically used for
group-shared directories.
But group directories writable by non-group members should not imply
that such non-group members can magically join the group, so make sure
to clear the sgid bit on non-directories for non-members (but remember
that sgid without group execute means "mandatory locking", just to
confuse things even more).
Reported-by: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"
This commit may cause a less than required dma mask to be used for
some allocations, which apparently leads to module load failures for
iwlwifi sometimes.
cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf()
smb{2,3}_create_lease_buf() store a lease key in the lease
context for later usage on a lease break.
In most paths, the key is currently sourced from data that
happens to be on the stack near local variables for oplock in
SMB2_open() callers, e.g. from open_shroot(), whereas
smb2_open_file() properly allocates space on its stack for it.
The address of those local variables holding the oplock is then
passed to create_lease_buf handlers via SMB2_open(), and 16
bytes near oplock are used. This causes a stack out-of-bounds
access as reported by KASAN on SMB2.1 and SMB3 mounts (first
out-of-bounds access is shown here):
Lease keys are however already generated and stored in fid data
on open and create paths: pass them down to the lease context
creation handlers and use them.
Paulo Alcantara [Thu, 5 Jul 2018 16:46:34 +0000 (13:46 -0300)]
cifs: Fix infinite loop when using hard mount option
For every request we send, whether it is SMB1 or SMB2+, we attempt to
reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying
out the request.
So, while server->tcpStatus != CifsNeedReconnect, we wait for the
reconnection to succeed on wait_event_interruptible_timeout(). If it
returns, that means that either the condition was evaluated to true, or
timeout elapsed, or it was interrupted by a signal.
Since we're not handling the case where the process woke up due to a
received signal (-ERESTARTSYS), the next call to
wait_event_interruptible_timeout() will _always_ fail and we end up
looping forever inside either cifs_reconnect_tcon() or smb2_reconnect().
(break connection to server before executing bellow cmd)
$ stat -f /mnt/test & sleep 140
[1] 2511
$ ps -aux -q 2511
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f
/mnt/test
$ kill -9 2511
(wait for a while; process is stuck in the kernel)
$ ps -aux -q 2511
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f
/mnt/test
By using 'hard' mount point means that cifs.ko will keep retrying
indefinitely, however we must allow the process to be killed otherwise
it would hang the system.
Signed-off-by: Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting
A "small" CIFS buffer is not big enough in general to hold a
setacl request for SMB2, and we end up overflowing the buffer in
send_set_info(). For instance:
[ 330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs]
[ 330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012
[ 330.967039] Memory state around the buggy address:
[ 330.969255] ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 330.971833] ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ 330.976956] ^
[ 330.979226] ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 330.981755] ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 330.984225] ==================================================================
Fix this by allocating a regular CIFS buffer in
smb2_plain_req_init() if the request command is SMB2_SET_INFO.
Reported-by: Jianhong Yin <jiyin@redhat.com> Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") CC: Stable <stable@vger.kernel.org> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-and-tested-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Wed, 4 Jul 2018 17:16:16 +0000 (14:16 -0300)]
cifs: Fix memory leak in smb2_set_ea()
This patch fixes a memory leak when doing a setxattr(2) in SMB2+.
Signed-off-by: Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Ronnie Sahlberg [Thu, 28 Jun 2018 00:47:14 +0000 (10:47 +1000)]
cifs: fix SMB1 breakage
SMB1 mounting broke in commit 35e2cc1ba755
("cifs: Use correct packet length in SMB2_TRANSFORM header")
Fix it and also rename smb2_rqst_len to smb_rqst_len
to make it less unobvious that the function is also called from
CIFS/SMB1
Good job by Paulo reviewing and cleaning up Ronnie's original patch.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Sat, 23 Jun 2018 17:52:24 +0000 (14:52 -0300)]
cifs: Fix validation of signed data in smb2
Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack")
We failed to validate signed data returned by the server because
__cifs_calc_signature() now expects to sign the actual data in iov but
we were also passing down the rfc1002 length.
Fix smb3_calc_signature() to calculate signature of rfc1002 length prior
to passing only the actual data iov[1-N] to __cifs_calc_signature(). In
addition, there are a few cases where no rfc1002 length is passed so we
make sure there's one (iov_len == 4).
Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Sat, 23 Jun 2018 17:52:23 +0000 (14:52 -0300)]
cifs: Fix validation of signed data in smb3+
Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack")
We failed to validate signed data returned by the server because
__cifs_calc_signature() now expects to sign the actual data in iov but
we were also passing down the rfc1002 length.
Fix smb3_calc_signature() to calculate signature of rfc1002 length prior
to passing only the actual data iov[1-N] to __cifs_calc_signature(). In
addition, there are a few cases where no rfc1002 length is passed so we
make sure there's one (iov_len == 4).
Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Lars Persson [Mon, 25 Jun 2018 12:05:25 +0000 (14:05 +0200)]
cifs: Fix use after free of a mid_q_entry
With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.
Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.
This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.
Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:
if (server->large_buf)
buf = server->bigbuf;
+ usleep_range(500, 4000);
server->lstrp = jiffies;
To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.
Cc: stable@vger.kernel.org Signed-off-by: Lars Persson <larper@axis.com> Acked-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
It turns out that systemd has a bug: it wants to load the autofs module
early because of some initialization ordering with udev, and it doesn't
do that correctly. Everywhere else it does the proper "look up module
name" that does the proper alias resolution, but in that early code, it
just uses a hardcoded "autofs4" for the module name.
The result of that is that as of commit a2225d931f75 ("autofs: remove
left-over autofs4 stubs"), you get
systemd[1]: Failed to insert module 'autofs4': No such file or directory
in the system logs, and a lack of module loading. All this despite the
fact that we had very clearly marked 'autofs4' as an alias for this
module.
What's so ridiculous about this is that literally everything else does
the module alias handling correctly, including really old versions of
systemd (that just used 'modprobe' to do this), and even all the other
systemd module loading code.
Only that special systemd early module load code is broken, hardcoding
the module names for not just 'autofs4', but also "ipv6", "unix",
"ip_tables" and "virtio_rng". Very annoying.
Instead of creating an _additional_ separate compatibility 'autofs4'
module, just rely on the fact that everybody else gets this right, and
just call the module 'autofs4' for compatibility reasons, with 'autofs'
as the alias name.
That will allow the systemd people to fix their bugs, adding the proper
alias handling, and maybe even fix the name of the module to be just
"autofs" (so that they can _test_ the alias handling). And eventually,
we can revert this silly compatibility hack.
Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.
After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM. binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored. A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".
Since this flag is a no-op on ARM64, we can safely drop it.
Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Merge tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent ACPICA regression, fix a battery driver regression
introduced during the 4.17 cycle and fix up the recently added support
for the PPTT ACPI table.
Specifics:
- Revert part of a recent ACPICA regression fix that added leading
newlines to ACPICA error messages and made the kernel log look
broken (Rafael Wysocki).
- Fix an ACPI battery driver regression introduced during the 4.17
cycle due to incorrect error handling that made Thinkpad 13 laptops
crash on boot (Jouke Witteveen).
- Fix up the recently added PPTT ACPI table support by covering the
case when a PPTT structure represents a processors group correctly
(Sudeep Holla)"
* tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Safe unregistering of hooks
ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set
ACPICA: Drop leading newlines from error messages
Merge tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a PCI power management regression introduced during the 4.17
cycle and fix up the recently added support for devices in multiple
power domains.
Specifics:
- Resume parallel PCI (non-PCIe) bridges on suspend-to-RAM (ACP S3)
to avoid confusing the platform firmware which started to happen
after a core power management regression fix that went in during
the 4.17 cycle (Rafael Wysocki).
- Fix up the recently added support for devices in multiple power
domains by avoiding to power up the entire domain unnecessarily
when attaching a device to it (Ulf Hansson)"
* tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Domains: Don't power on at attach for the multi PM domain case
PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
Merge tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a handful of fixes for the RISC-V port:
- A fix to R_RISCV_ADD32/R_RISCV_SUB32 relocations that allows
modules that use these to load correctly.
- The removal of of_platform_populate(), which is obselete.
- The removal of irq-riscv-intc.h, which is obselete.
- A fix to PTRACE_SETREGSET.
- Fixes that allow the RV32I kernel to build (at least for Zong, I've
got another patch on the mailing list that's necessary on my setup :)).
I've just given these a defconfig build test"
* tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Fix PTRACE_SETREGSET bug.
RISC-V: Don't include irq-riscv-intc.h
riscv: remove unnecessary of_platform_populate call
RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocations
RISC-V: Change variable type for 32-bit compatible
RISC-V: Add definiion of extract symbol's index and type for 32-bit
RISC-V: Select GENERIC_UCMPDI2 on RV32I
RISC-V: Add conditional macro for zone of DMA32
drm/amd/display: add a check for display depth validity
[why]
HDMI 2.0 fails to validate 4K@60 timing with 10 bpc
[how]
Adding a helper function that would verify if the display depth
assigned would pass a bandwidth validation.
Drop the display depth by one level till calculated pixel clk
is lower than maximum TMDS clk.
Bugzilla: https://bugs.freedesktop.org/106959
Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: adding ycbcr420 pixel encoding for hdmi
[why]
HDMI EDID's VSDB contains spectial timings for specifically
YCbCr 4:2:0 colour space. In those cases we need to verify
if the mode provided is one of the special ones has to use
YCbCr 4:2:0 pixel encoding for display info.
[how]
Verify if the mode is using specific ycbcr420 colour space with
the help of DRM helper function and assign the mode to use
ycbcr420 pixel encoding.
Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikulas Patocka [Sun, 3 Jun 2018 14:40:54 +0000 (16:40 +0200)]
drm/udl: fix display corruption of the last line
The displaylink hardware has such a peculiarity that it doesn't render a
command until next command is received. This produces occasional
corruption, such as when setting 22x11 font on the console, only the first
line of the cursor will be blinking if the cursor is located at some
specific columns.
When we end up with a repeating pixel, the driver has a bug that it leaves
one uninitialized byte after the command (and this byte is enough to flush
the command and render it - thus it fixes the screen corruption), however
whe we end up with a non-repeating pixel, there is no byte appended and
this results in temporary screen corruption.
This patch fixes the screen corruption by always appending a byte 0xAF at
the end of URB. It also removes the uninitialized byte.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
arm64: add endianness option to LDFLAGS instead of LD
With the recent syntax extension, Kconfig is now able to evaluate the
compiler / toolchain capability.
However, accumulating flags to 'LD' is not compatible with the way
it works; 'LD' must be passed to Kconfig to call $(ld-option,...)
from Kconfig files. If you tweak 'LD' in arch Makefile depending on
CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency
between Makefile and Kconfig.
These patches for building 32-bit RISC-V kernel.
- Fix the compile errors and warnings on RV32I.
- Fix some incompatible problem on RV32I.
- Add format.h for compatible of print format.
The fixed width integer types format for Elf_Addr will move to
generic header by another patch. For now, there are some warning
about unexpected argument of type on RV32I.
Change in v1:
- Fix some error in v1
- Remove implementation of fixed width integer types format for Elf_Addr.
Palmer Dabbelt [Fri, 22 Jun 2018 22:46:28 +0000 (15:46 -0700)]
RISC-V: Don't include irq-riscv-intc.h
This file has never existed in the upstream kernel, but it's guarded by
an #ifdef that's also never existed in the upstream kernel. As a part
of our interrupt controller refactoring this header is no longer
necessary, but this reference managed to sneak in anyway.
The DT core will call of_platform_default_populate, so it is not
necessary for arch specific code to call it unless there are custom
match entries, auxdata or parent device. Neither of those apply here, so
remove the call.
Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: linux-riscv@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
arm64: Use aarch64elf and aarch64elfb emulation mode variants
The aarch64linux and aarch64linuxb emulation modes are not supported by
bare-metal toolchains and Linux using them forbids building the kernel
with these toolchains.
Since there is apparently no reason to target these emulation modes, the
more generic elf modes are used instead, allowing to build on bare-metal
toolchains as well as the already-supported ones.
Fixes: 3d6a7b99e3fa ("arm64: ensure the kernel is compiled for LP64") Cc: stable@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Maciej Purski [Thu, 28 Jun 2018 16:44:02 +0000 (18:44 +0200)]
drm/bridge/sii8620: Fix display of packed pixel modes
Current implementation does not guarantee packed pixel modes working
with every dongle. There are some dongles, which require selecting
the output mode explicitly.
Write proper values to registers in packed_pixel mode, based on how it
is done in vendor's code. Select output color space: RGB
(no packed pixel) or YCBCR422 (packed pixel).
Maciej Purski [Thu, 28 Jun 2018 16:44:01 +0000 (18:44 +0200)]
drm/bridge/sii8620: Send AVI infoframe in all MHL versions
Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles
need AVI infoframe to work correctly in either packed pixel mode or
non-packed pixel mode.
Send AVI infoframe in set_infoframes() in every case. Create an
infoframe using drm_hdmi_infoframe_from_display_mode() instead of
manually filling each infoframe structure's field.
A hooking API was implemented for 4.17 in fa93854f7a7ed63d followed
by hooks for Thinkpad laptops in 2801b9683f740012. The Thinkpad
drivers did not support the Thinkpad 13 and the hooking API crashes
on unsupported batteries by altering a list of hooks during unsafe
iteration. Thus, Thinkpad 13 laptops could no longer boot.
Additionally, a lock was kept in place and debugging information was
printed out of order.
Fixes: fa93854f7a7e (battery: Add the battery hooking API) Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Nicolai Hähnle [Fri, 29 Jun 2018 11:23:25 +0000 (13:23 +0200)]
drm/amdgpu: fix user fence write race condition
The buffer object backing the user fence is reserved using the non-user
fence, i.e., as soon as the non-user fence is signaled, the user fence
buffer object can be moved or even destroyed.
Therefore, emit the user fence first.
Both fences have the same cache invalidation behavior, so this should
have no user-visible effect.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Pavel Tatashin [Wed, 4 Jul 2018 00:02:53 +0000 (17:02 -0700)]
mm: teach dump_page() to correctly output poisoned struct pages
If struct page is poisoned, and uninitialized access is detected via
PF_POISONED_CHECK(page) dump_page() is called to output the page. But,
the dump_page() itself accesses struct page to determine how to print
it, and therefore gets into a recursive loop.
I could not find a function attribute that lets me disable
-fsanitize-coverage=trace-pc for just one function, so this turns it off
for the entire file instead.
Link: http://lkml.kernel.org/r/20180529103636.1535457-1-arnd@arndb.de Fixes: 758517202bd2e4 ("arm: port KCOV to arm") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhen Lei [Wed, 4 Jul 2018 00:02:46 +0000 (17:02 -0700)]
kasan: fix shadow_size calculation error in kasan_module_alloc
There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT)
Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1]. The
operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the
roundup operation can not retrieve the missed one page. For example:
size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get
shadow_size=0x5000, but actually we need 6 pages.
This can lead to a kernel crash when kasan is enabled and the value of
mod->core_layout.size or mod->init_layout.size is like above. Because
the shadow memory of X has not been allocated and mapped.
When booting with very large numbers of gigantic (i.e. 1G) pages, the
operations in the loop of gather_bootmem_prealloc, and specifically
prep_compound_gigantic_page, takes a very long time, and can cause a
softlockup if enough pages are requested at boot.
For example booting with 3844 1G pages requires prepping
(set_compound_head, init the count) over 1 billion 4K tail pages, which
takes considerable time.
Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to
prevent this lockup.
Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and
no softlockup is reported, and the hugepages are reported as
successfully setup.
Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.com Signed-off-by: Cannon Matthews <cannonmatthews@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use huge_ptep_get() to translate huge ptes to normal ptes so we can
check them with the huge_pte_* functions. Otherwise some architectures
will check the wrong values and will not wait for userspace to bring in
the memory.
Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com Fixes: 369cd2121be4 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changbin Du [Wed, 31 Jan 2018 15:48:49 +0000 (23:48 +0800)]
tracing: Fix missing return symbol in function_graph output
The function_graph tracer does not show the interrupt return marker for the
leaf entry. On leaf entries, we see an unbalanced interrupt marker (the
interrupt was entered, but nevern left).
Before:
1) | SyS_write() {
1) | __fdget_pos() {
1) 0.061 us | __fget_light();
1) 0.289 us | }
1) | vfs_write() {
1) 0.049 us | rw_verify_area();
1) + 15.424 us | __vfs_write();
1) ==========> |
1) 6.003 us | smp_apic_timer_interrupt();
1) 0.055 us | __fsnotify_parent();
1) 0.073 us | fsnotify();
1) + 23.665 us | }
1) + 24.501 us | }
After:
0) | SyS_write() {
0) | __fdget_pos() {
0) 0.052 us | __fget_light();
0) 0.328 us | }
0) | vfs_write() {
0) 0.057 us | rw_verify_area();
0) | __vfs_write() {
0) ==========> |
0) 8.548 us | smp_apic_timer_interrupt();
0) <========== |
0) + 36.507 us | } /* __vfs_write */
0) 0.049 us | __fsnotify_parent();
0) 0.066 us | fsnotify();
0) + 50.064 us | }
0) + 50.952 us | }
Link: http://lkml.kernel.org/r/1517413729-20411-1-git-send-email-changbin.du@intel.com Cc: stable@vger.kernel.org Fixes: f8b755ac8e0cc ("tracing/function-graph-tracer: Output arrows signal on hardirq call/return") Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Silence warnings (triggered at W=1) by adding relevant __printf attributes.
CC kernel/trace/trace.o
kernel/trace/trace.c: In function ‘__trace_array_vprintk’:
kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args);
^~~
AR kernel/trace/built-in.o
tracing: Make create_filter() code match the comments
The comment in create_filter() states that the passed in filter pointer
(filterp) will either be NULL or contain an error message stating why the
filter failed. But it also expects the filter pointer to point to NULL when
passed in. If it is not, the function create_filter_start() will warn and
return an error message without updating the filter pointer. This is not
what the comment states.
As we always expect the pointer to point to NULL, if it is not, trigger a
WARN_ON(), set it to NULL, and then continue the path as the rest will work
as the comment states. Also update the comment to state it must point to
NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
My networking merge (commit 4e33d7d47943: "Pull networking fixes from
David Miller") got the poll() handling conflict wrong for af_smc.
The conflict between my a11e1d432b51 ("Revert changes to convert to
->poll_mask() and aio IOCB_CMD_POLL") and Ursula Braun's 24ac3a08e658
("net/smc: rebuild nonblocking connect") should have left the call to
sock_poll_wait() in place, just without the socket lock release/retake.
And I really should have realized that. But happily, I at least asked
Ursula to double-check the merge, and she set me right.
This also fixes an incidental whitespace issue nearby that annoyed me
while looking at this.
Pointed-out-by: Ursula Braun <ubraun@linux.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Tue, 3 Jul 2018 16:47:36 +0000 (09:47 -0700)]
Merge tag 'imx-fixes-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.18, round 2:
- A couple of imx defconfig updates selecting USB ULPI support to fix
a regression seen with USB driver, which is caused by commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51").
- A fix on imx51-zii-rdu1 board touchscreen pinctrl setting, which
causes an interrupt storm.
* tag 'imx-fixes-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v4_v5_defconfig: Select ULPI support
ARM: imx_v6_v7_defconfig: Select ULPI support
ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl
Ulf Hansson [Fri, 29 Jun 2018 09:15:37 +0000 (11:15 +0200)]
PM / Domains: Don't power on at attach for the multi PM domain case
There are no legacy behavior in drivers to consider while attaching a
device to genpd - for the multiple PM domain case.
For that reason, let's instead require the driver to runtime resume the
device, via calling pm_runtime_get_sync() for example, when it needs to
power on the corresponding PM domain.
This allows us to improve the situation during attach. Instead of always
power on the PM domain, which may be unnecessary, let's leave it in its
current state. Additionally, to avoid the PM domain to stay powered on,
let's schedule a power off work.
Fixes: 3c095f32a92b (PM / Domains: Add support for multi PM domains ...) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Evan Green [Mon, 2 Jul 2018 23:03:46 +0000 (16:03 -0700)]
loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl
This change adds LOOP_SET_BLOCK_SIZE as one of the supported ioctls
in lo_compat_ioctl. It only takes an unsigned long argument, and
in practice a 32-bit value works fine.
Chris Wilson [Sat, 30 Jun 2018 09:05:09 +0000 (10:05 +0100)]
drm/i915: Try GGTT mmapping whole object as partial
If the whole object is already pinned by HW for use as scanout, we will
fail to move it to the mappable region and so must resort to using a
partial VMA covering the whole object.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104513 Fixes: aa136d9d72c2 ("drm/i915: Convert partial ggtt vma to full ggtt if it spans the entire object") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180630090509.469-1-chris@chris-wilson.co.uk
(cherry picked from commit 7e7367d3bc6cf27dd7e007e7897fcebfeff1ee8b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Nick Desaulniers [Thu, 21 Jun 2018 16:23:24 +0000 (09:23 -0700)]
x86/paravirt: Make native_save_fl() extern inline
native_save_fl() is marked static inline, but by using it as
a function pointer in arch/x86/kernel/paravirt.c, it MUST be outlined.
paravirt's use of native_save_fl() also requires that no GPRs other than
%rax are clobbered.
Compilers have different heuristics which they use to emit stack guard
code, the emittance of which can break paravirt's callee saved assumption
by clobbering %rcx.
Marking a function definition extern inline means that if this version
cannot be inlined, then the out-of-line version will be preferred. By
having the out-of-line version be implemented in assembly, it cannot be
instrumented with a stack protector, which might violate custom calling
conventions that code like paravirt rely on.
The semantics of extern inline has changed since gnu89. This means that
folks using GCC versions >= 5.1 may see symbol redefinition errors at
link time for subdirs that override KBUILD_CFLAGS (making the C standard
used implicit) regardless of this patch. This has been cleaned up
earlier in the patch set, but is left as a note in the commit message
for future travelers.
Nick Desaulniers [Thu, 21 Jun 2018 16:23:22 +0000 (09:23 -0700)]
compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations
Functions marked extern inline do not emit an externally visible
function when the gnu89 C standard is used. Some KBUILD Makefiles
overwrite KBUILD_CFLAGS. This is an issue for GCC 5.1+ users as without
an explicit C standard specified, the default is gnu11. Since c99, the
semantics of extern inline have changed such that an externally visible
function is always emitted. This can lead to multiple definition errors
of extern inline functions at link time of compilation units whose build
files have removed an explicit C standard compiler flag for users of GCC
5.1+ or Clang.
Tom Lendacky [Mon, 2 Jul 2018 21:36:02 +0000 (16:36 -0500)]
x86/bugs: Fix the AMD SSBD usage of the SPEC_CTRL MSR
On AMD, the presence of the MSR_SPEC_CTRL feature does not imply that the
SSBD mitigation support should use the SPEC_CTRL MSR. Other features could
have caused the MSR_SPEC_CTRL feature to be set, while a different SSBD
mitigation option is in place.
Update the SSBD support to check for the actual SSBD features that will
use the SPEC_CTRL MSR.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 6ac2f49edb1e ("x86/bugs: Add AMD's SPEC_CTRL MSR usage") Link: http://lkml.kernel.org/r/20180702213602.29202.33151.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tom Lendacky [Mon, 2 Jul 2018 21:35:53 +0000 (16:35 -0500)]
x86/bugs: Update when to check for the LS_CFG SSBD mitigation
If either the X86_FEATURE_AMD_SSBD or X86_FEATURE_VIRT_SSBD features are
present, then there is no need to perform the check for the LS_CFG SSBD
mitigation support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180702213553.29202.21089.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adam Ford [Mon, 25 Jun 2018 12:41:33 +0000 (07:41 -0500)]
ARM: dts: omap3: Fix am3517 mdio and emac clock references
A previous patch removed OMAP clock aliases that were perceived
to be unnecessary. Unfortunately, it broke the ethernet on the
am3517-evm. This patch enables the MDIO clock and EMAC clock.
Fixes: 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases") Cc: stable@vger.kernel.org #4.16+ Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
x86/mm/32: Initialize the CR4 shadow before __flush_tlb_all()
On 32-bit kernels, __flush_tlb_all() may have read the CR4 shadow before the
initialization of CR4 shadow in cpu_init().
Fix it by adding an explicit cr4_init_shadow() call into start_secondary()
which is the first function called on non-boot SMP CPUs - ahead of the
__flush_tlb_all() call.
( This is somewhat of a layering violation, but start_secondary() does
CR4 bootstrap in the PCID case anyway. )
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: http://lkml.kernel.org/r/b07b6ae9-4b57-4b40-b9bc-50c2c67f1d91@default Signed-off-by: Ingo Molnar <mingo@kernel.org>
isn't working for him. Because of the following race:
> controller Thread CPUHP Thread
> takedown_cpu
> kthread_park
> kthread_parkme
> Set KTHREAD_SHOULD_PARK
> smpboot_thread_fn
> set Task interruptible
>
>
> wake_up_process
> if (!(p->state & state))
> goto out;
>
> Kthread_parkme
> SET TASK_PARKED
> schedule
> raw_spin_lock(&rq->lock)
> ttwu_remote
> waiting for __task_rq_lock
> context_switch
>
> finish_lock_switch
>
>
>
> Case TASK_PARKED
> kthread_park_complete
>
>
> SET Running
Furthermore, Oleg noticed that the whole scheduler TASK_PARKED
handling is buggered because the TASK_DEAD thing is done with
preemption disabled, the current code can still complete early on
preemption :/
So basically revert that earlier fix and go with a variant of the
alternative mentioned in the commit. Promote TASK_PARKED to special
state to avoid the store-store issue on task->state leading to the
WARN in kthread_unpark() -> __kthread_bind().
But in addition, add wait_task_inactive() to kthread_park() to ensure
the task really is PARKED when we return from kthread_park(). This
avoids the whole kthread still gets migrated nonsense -- although it
would be really good to get this done differently.
projects / mirror_ubuntu-kernels.git / log