]> git.proxmox.com Git - mirror_ubuntu-jammy-kernel.git/commit
USB: misc: Add onboard_usb_hub driver
authorMatthias Kaehlcke <mka@chromium.org>
Wed, 9 Jun 2021 22:02:46 +0000 (15:02 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 15 Jun 2021 13:48:35 +0000 (15:48 +0200)
commitb4e326165e21d6a11483f6a4de2174b933413554
tree71a4888a272d565540f505b845f7314701e6c279
parent80ee6fc281b7f7b63db46b0eb0c95c0f9500767b
USB: misc: Add onboard_usb_hub driver

The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.

Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.

Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).

Note: the current series only supports hubs connected directly to
a root hub (through xhci-plat), support for other configurations
could be added if needed.

Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210609150159.v12.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub [new file with mode: 0644]
MAINTAINERS
drivers/usb/misc/Kconfig
drivers/usb/misc/Makefile
drivers/usb/misc/onboard_usb_hub.c [new file with mode: 0644]
include/linux/usb/onboard_hub.h [new file with mode: 0644]