[mirror_frr.git] / ospfd / OSPF-TRAP-MIB.txt

OSPF-TRAP-MIB DEFINITIONS ::= BEGIN

    IMPORTS
            MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
                FROM SNMPv2-SMI
            MODULE-COMPLIANCE, OBJECT-GROUP
                FROM SNMPv2-CONF
            ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
            ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
            ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
            ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
            ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
            ospfExtLsdbLimit, ospf
                FROM OSPF-MIB;

    ospfTrap MODULE-IDENTITY
           LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
           ORGANIZATION "IETF OSPF Working Group"
           CONTACT-INFO
           "                      Fred Baker
           Postal:                Cisco Systems
                                  519 Lado Drive
                                  Santa Barbara, California 93111
           Tel:                   +1 805 681 0115
           E-Mail:                fred@cisco.com

                                  Rob Coltun
           Postal:                RainbowBridge Communications
           Tel:                   (301) 340-9416
           E-Mail:                rcoltun@rainbow-bridge.com"
       DESCRIPTION
          "The MIB module to describe traps for  the  OSPF
          Version 2 Protocol."
      ::= { ospf 16 }

-- Trap Support Objects

--         The following are support objects for the OSPF traps.

ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }

    ospfSetTrap OBJECT-TYPE
        SYNTAX   OCTET STRING (SIZE(4))
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "A four-octet string serving as a bit  map  for
           the trap events defined by the OSPF traps. This
           object is used to enable and  disable  specific
           OSPF   traps   where  a  1  in  the  bit  field
           represents enabled.  The right-most bit  (least
           significant) represents trap 0."
       ::= { ospfTrapControl 1 }


    ospfConfigErrorType OBJECT-TYPE
        SYNTAX   INTEGER   {
                    badVersion (1),
                    areaMismatch (2),
                    unknownNbmaNbr (3), -- Router is Dr eligible
                    unknownVirtualNbr (4),
                    authTypeMismatch(5),
                    authFailure (6),
                    netMaskMismatch (7),
                    helloIntervalMismatch (8),
                    deadIntervalMismatch (9),
                    optionMismatch (10) }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "Potential types  of  configuration  conflicts.
           Used  by the ospfConfigError and ospfConfigVir-
           tError traps."
   ::= { ospfTrapControl 2 }


    ospfPacketType OBJECT-TYPE
        SYNTAX   INTEGER   {
                    hello (1),
                    dbDescript (2),
                    lsReq (3),
                    lsUpdate (4),
                    lsAck (5) }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "OSPF packet types."
   ::= { ospfTrapControl 3 }


    ospfPacketSrc OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP address of an inbound packet that  can-
           not be identified by a neighbor instance."
       ::= { ospfTrapControl 4 }


-- Traps


    ospfIfStateChange NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfIfState   -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfStateChange trap signifies that there
           has been a change in the state of a non-virtual
           OSPF interface. This trap should  be  generated
           when  the interface state regresses (e.g., goes
           from Dr to Down) or progresses  to  a  terminal
           state  (i.e.,  Point-to-Point, DR Other, Dr, or
           Backup)."
   ::= { ospfTraps 16 }


    ospfVirtIfStateChange NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfVirtIfState  -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfStateChange trap signifies that there
           has  been a change in the state of an OSPF vir-
           tual interface.
           This trap should be generated when  the  inter-
           face  state  regresses  (e.g., goes from Point-
           to-Point to Down) or progresses to  a  terminal
           state (i.e., Point-to-Point)."
   ::= { ospfTraps 1 }


    ospfNbrStateChange NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfNbrIpAddr,
                    ospfNbrAddressLessIndex,
                    ospfNbrRtrId,
                    ospfNbrState  -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An  ospfNbrStateChange  trap  signifies   that
           there  has been a change in the state of a non-
           virtual OSPF neighbor.   This  trap  should  be
           generated  when  the  neighbor  state regresses
           (e.g., goes from Attempt or Full  to  1-Way  or
           Down)  or progresses to a terminal state (e.g.,
           2-Way or Full).  When an  neighbor  transitions
           from  or  to Full on non-broadcast multi-access
           and broadcast networks, the trap should be gen-
           erated  by the designated router.  A designated
           router transitioning to Down will be  noted  by
           ospfIfStateChange."
   ::= { ospfTraps 2 }


    ospfVirtNbrStateChange NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtNbrArea,
                    ospfVirtNbrRtrId,
                    ospfVirtNbrState  -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfStateChange trap signifies that there
           has  been a change in the state of an OSPF vir-
           tual neighbor.  This trap should  be  generated
           when  the  neighbor state regresses (e.g., goes
           from Attempt or  Full  to  1-Way  or  Down)  or
           progresses to a terminal state (e.g., Full)."
   ::= { ospfTraps 3 }
    ospfIfConfigError NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfPacketSrc,  -- The source IP address
                    ospfConfigErrorType, -- Type of error
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfConfigError  trap  signifies  that  a
           packet  has  been received on a non-virtual in-
           terface  from  a  router  whose   configuration
           parameters  conflict  with this router's confi-
           guration parameters.  Note that the  event  op-
           tionMismatch  should  cause  a  trap only if it
           prevents an adjacency from forming."
                  ::= { ospfTraps 4 }


    ospfVirtIfConfigError NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfConfigErrorType, -- Type of error
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfConfigError trap signifies that a pack-
           et  has  been  received  on a virtual interface
           from a router  whose  configuration  parameters
           conflict   with   this  router's  configuration
           parameters.  Note that the event optionMismatch
           should  cause a trap only if it prevents an ad-
           jacency from forming."
   ::= { ospfTraps 5 }


    ospfIfAuthFailure NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfPacketSrc,  -- The source IP address
                    ospfConfigErrorType, -- authTypeMismatch or
                                         -- authFailure
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfAuthFailure  trap  signifies  that  a
           packet  has  been received on a non-virtual in-
           terface from a router whose authentication  key
           or  authentication  type  conflicts  with  this
           router's authentication key  or  authentication
           type."
   ::= { ospfTraps 6 }


    ospfVirtIfAuthFailure NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfConfigErrorType, -- authTypeMismatch or
                                         -- authFailure
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfVirtIfAuthFailure trap signifies that a
           packet has been received on a virtual interface
           from a router whose authentication key  or  au-
           thentication  type conflicts with this router's
           authentication key or authentication type."
   ::= { ospfTraps 7 }


    ospfIfRxBadPacket NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfPacketSrc,  -- The source IP address
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfRxBadPacket trap  signifies  that  an
           OSPF  packet has been received on a non-virtual
           interface that cannot be parsed."
   ::= { ospfTraps 8 }

    ospfVirtIfRxBadPacket NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfRxBadPacket trap signifies that an OSPF
           packet has been received on a virtual interface
           that cannot be parsed."
   ::= { ospfTraps 9 }


    ospfTxRetransmit NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfNbrRtrId, -- Destination
                    ospfPacketType,
                    ospfLsdbType,
                    ospfLsdbLsid,
                    ospfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfTxRetransmit  trap  signifies  than  an
           OSPF  packet  has  been retransmitted on a non-
           virtual interface.  All packets that may be re-
           transmitted  are associated with an LSDB entry.
           The LS type, LS ID, and Router ID are  used  to
           identify the LSDB entry."
   ::= { ospfTraps 10 }


    ospfVirtIfTxRetransmit NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfPacketType,
                    ospfLsdbType,
                    ospfLsdbLsid,
                    ospfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfTxRetransmit  trap  signifies  than  an
           OSPF packet has been retransmitted on a virtual
           interface.  All packets that may be retransmit-
           ted  are  associated with an LSDB entry. The LS
           type, LS ID, and Router ID are used to identify
           the LSDB entry."
   ::= { ospfTraps 11 }


    ospfOriginateLsa NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfLsdbAreaId,  -- 0.0.0.0 for AS Externals
                    ospfLsdbType,
                    ospfLsdbLsid,
                    ospfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfOriginateLsa trap signifies that a  new
           LSA  has  been originated by this router.  This
           trap should not be invoked for simple refreshes
           of  LSAs  (which happesn every 30 minutes), but
           instead will only be invoked  when  an  LSA  is
           (re)originated due to a topology change.  Addi-
           tionally, this trap does not include LSAs  that
           are  being  flushed  because  they have reached
           MaxAge."
   ::= { ospfTraps 12 }


    ospfMaxAgeLsa NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfLsdbAreaId,  -- 0.0.0.0 for AS Externals
                    ospfLsdbType,
                    ospfLsdbLsid,
                    ospfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfMaxAgeLsa trap signifies  that  one  of
           the LSA in the router's link-state database has
           aged to MaxAge."
   ::= { ospfTraps 13 }


    ospfLsdbOverflow NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfExtLsdbLimit
                  }
        STATUS             current
        DESCRIPTION
           "An ospfLsdbOverflow trap  signifies  that  the
           number of LSAs in the router's link-state data-
           base has exceeded ospfExtLsdbLimit."
   ::= { ospfTraps 14 }


    ospfLsdbApproachingOverflow NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfExtLsdbLimit
                  }
        STATUS             current
        DESCRIPTION
           "An ospfLsdbApproachingOverflow trap  signifies
           that  the  number of LSAs in the router's link-
           state database has exceeded ninety  percent  of
           ospfExtLsdbLimit."
   ::= { ospfTraps 15 }


-- conformance information

ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }

ospfTrapGroups      OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }

-- compliance statements

    ospfTrapCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
           "The compliance statement "
       MODULE  -- this module
       MANDATORY-GROUPS { ospfTrapControlGroup }


        GROUP       ospfTrapControlGroup
        DESCRIPTION
           "This group is optional but recommended for all
           OSPF systems"
       ::= { ospfTrapCompliances 1 }


-- units of conformance

    ospfTrapControlGroup    OBJECT-GROUP
        OBJECTS {
                           ospfSetTrap,
                           ospfConfigErrorType,
                           ospfPacketType,
                           ospfPacketSrc
        }
        STATUS  current
        DESCRIPTION
           "These objects are required  to  control  traps
           from OSPF systems."
       ::= { ospfTrapGroups 1 }


END
Commit	Line	Data
718e3744	1	OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
	2
	3	IMPORTS
	4	MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
	5	FROM SNMPv2-SMI
	6	MODULE-COMPLIANCE, OBJECT-GROUP
	7	FROM SNMPv2-CONF
	8	ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
	9	ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
	10	ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
	11	ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
	12	ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
	13	ospfExtLsdbLimit, ospf
	14	FROM OSPF-MIB;
	15
	16	ospfTrap MODULE-IDENTITY
	17	LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
	18	ORGANIZATION "IETF OSPF Working Group"
	19	CONTACT-INFO
	20	" Fred Baker
	21	Postal: Cisco Systems
	22	519 Lado Drive
	23	Santa Barbara, California 93111
	24	Tel: +1 805 681 0115
	25	E-Mail: fred@cisco.com
	26
	27	Rob Coltun
	28	Postal: RainbowBridge Communications
	29	Tel: (301) 340-9416
	30	E-Mail: rcoltun@rainbow-bridge.com"
	31	DESCRIPTION
	32	"The MIB module to describe traps for the OSPF
	33	Version 2 Protocol."
	34	::= { ospf 16 }
	35
	36	-- Trap Support Objects
	37
	38	-- The following are support objects for the OSPF traps.
	39
	40	ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
	41	ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }
	42
	43	ospfSetTrap OBJECT-TYPE
	44	SYNTAX OCTET STRING (SIZE(4))
	45	MAX-ACCESS read-write
	46	STATUS current
	47	DESCRIPTION
	48	"A four-octet string serving as a bit map for
	49	the trap events defined by the OSPF traps. This
	50	object is used to enable and disable specific
	51	OSPF traps where a 1 in the bit field
	52	represents enabled. The right-most bit (least
	53	significant) represents trap 0."
	54	::= { ospfTrapControl 1 }
	55
	56
	57	ospfConfigErrorType OBJECT-TYPE
	58	SYNTAX INTEGER {
	59	badVersion (1),
	60	areaMismatch (2),
	61	unknownNbmaNbr (3), -- Router is Dr eligible
	62	unknownVirtualNbr (4),
	63	authTypeMismatch(5),
	64	authFailure (6),
65	netMaskMismatch (7),
66	helloIntervalMismatch (8),
67	deadIntervalMismatch (9),
68	optionMismatch (10) }
69	MAX-ACCESS read-only
70	STATUS current
71	DESCRIPTION
72	"Potential types of configuration conflicts.
73	Used by the ospfConfigError and ospfConfigVir-
74	tError traps."
75	::= { ospfTrapControl 2 }
76
77
78	ospfPacketType OBJECT-TYPE
79	SYNTAX INTEGER {
80	hello (1),
81	dbDescript (2),
82	lsReq (3),
83	lsUpdate (4),
84	lsAck (5) }
85	MAX-ACCESS read-only
86	STATUS current
87	DESCRIPTION
88	"OSPF packet types."
89	::= { ospfTrapControl 3 }
90
91
92	ospfPacketSrc OBJECT-TYPE
93	SYNTAX IpAddress
94	MAX-ACCESS read-only
95	STATUS current
96	DESCRIPTION
97	"The IP address of an inbound packet that can-
98	not be identified by a neighbor instance."
99	::= { ospfTrapControl 4 }
100
101
102	-- Traps
103
104
105	ospfIfStateChange NOTIFICATION-TYPE
106	OBJECTS {
107	ospfRouterId, -- The originator of the trap
108	ospfIfIpAddress,
109	ospfAddressLessIf,
110	ospfIfState -- The new state
111	}
112	STATUS current
113	DESCRIPTION
114	"An ospfIfStateChange trap signifies that there
115	has been a change in the state of a non-virtual
116	OSPF interface. This trap should be generated
117	when the interface state regresses (e.g., goes
118	from Dr to Down) or progresses to a terminal
119	state (i.e., Point-to-Point, DR Other, Dr, or
120	Backup)."
121	::= { ospfTraps 16 }
122
123
124	ospfVirtIfStateChange NOTIFICATION-TYPE
125	OBJECTS {
126	ospfRouterId, -- The originator of the trap
127	ospfVirtIfAreaId,
128	ospfVirtIfNeighbor,
129	ospfVirtIfState -- The new state
130	}
131	STATUS current
132	DESCRIPTION
133	"An ospfIfStateChange trap signifies that there
134	has been a change in the state of an OSPF vir-
135	tual interface.
136	This trap should be generated when the inter-
137	face state regresses (e.g., goes from Point-
138	to-Point to Down) or progresses to a terminal
139	state (i.e., Point-to-Point)."
140	::= { ospfTraps 1 }
141
142
143	ospfNbrStateChange NOTIFICATION-TYPE
144	OBJECTS {
145	ospfRouterId, -- The originator of the trap
146	ospfNbrIpAddr,
147	ospfNbrAddressLessIndex,
148	ospfNbrRtrId,
149	ospfNbrState -- The new state
150	}
151	STATUS current
152	DESCRIPTION
153	"An ospfNbrStateChange trap signifies that
154	there has been a change in the state of a non-
155	virtual OSPF neighbor. This trap should be
156	generated when the neighbor state regresses
157	(e.g., goes from Attempt or Full to 1-Way or
158	Down) or progresses to a terminal state (e.g.,
159	2-Way or Full). When an neighbor transitions
160	from or to Full on non-broadcast multi-access
161	and broadcast networks, the trap should be gen-
162	erated by the designated router. A designated
163	router transitioning to Down will be noted by
164	ospfIfStateChange."
165	::= { ospfTraps 2 }
166
167
168	ospfVirtNbrStateChange NOTIFICATION-TYPE
169	OBJECTS {
170	ospfRouterId, -- The originator of the trap
171	ospfVirtNbrArea,
172	ospfVirtNbrRtrId,
173	ospfVirtNbrState -- The new state
174	}
175	STATUS current
176	DESCRIPTION
177	"An ospfIfStateChange trap signifies that there
178	has been a change in the state of an OSPF vir-
179	tual neighbor. This trap should be generated
180	when the neighbor state regresses (e.g., goes
181	from Attempt or Full to 1-Way or Down) or
182	progresses to a terminal state (e.g., Full)."
183	::= { ospfTraps 3 }
184	ospfIfConfigError NOTIFICATION-TYPE
185	OBJECTS {
186	ospfRouterId, -- The originator of the trap
187	ospfIfIpAddress,
188	ospfAddressLessIf,
189	ospfPacketSrc, -- The source IP address
190	ospfConfigErrorType, -- Type of error
191	ospfPacketType
192	}
193	STATUS current
194	DESCRIPTION
195	"An ospfIfConfigError trap signifies that a
196	packet has been received on a non-virtual in-
197	terface from a router whose configuration
198	parameters conflict with this router's confi-
199	guration parameters. Note that the event op-
200	tionMismatch should cause a trap only if it
201	prevents an adjacency from forming."
202	::= { ospfTraps 4 }
203
204
205	ospfVirtIfConfigError NOTIFICATION-TYPE
206	OBJECTS {
207	ospfRouterId, -- The originator of the trap
208	ospfVirtIfAreaId,
209	ospfVirtIfNeighbor,
210	ospfConfigErrorType, -- Type of error
211	ospfPacketType
212	}
213	STATUS current
214	DESCRIPTION
215	"An ospfConfigError trap signifies that a pack-
216	et has been received on a virtual interface
217	from a router whose configuration parameters
218	conflict with this router's configuration
219	parameters. Note that the event optionMismatch
220	should cause a trap only if it prevents an ad-
221	jacency from forming."
222	::= { ospfTraps 5 }
223
224
225	ospfIfAuthFailure NOTIFICATION-TYPE
226	OBJECTS {
227	ospfRouterId, -- The originator of the trap
228	ospfIfIpAddress,
229	ospfAddressLessIf,
230	ospfPacketSrc, -- The source IP address
231	ospfConfigErrorType, -- authTypeMismatch or
232	-- authFailure
233	ospfPacketType
234	}
235	STATUS current
236	DESCRIPTION
237	"An ospfIfAuthFailure trap signifies that a
238	packet has been received on a non-virtual in-
239	terface from a router whose authentication key
240	or authentication type conflicts with this
241	router's authentication key or authentication
242	type."
243	::= { ospfTraps 6 }
244
245
246	ospfVirtIfAuthFailure NOTIFICATION-TYPE
247	OBJECTS {
248	ospfRouterId, -- The originator of the trap
249	ospfVirtIfAreaId,
250	ospfVirtIfNeighbor,
251	ospfConfigErrorType, -- authTypeMismatch or
252	-- authFailure
253	ospfPacketType
254	}
255	STATUS current
256	DESCRIPTION
257	"An ospfVirtIfAuthFailure trap signifies that a
258	packet has been received on a virtual interface
259	from a router whose authentication key or au-
260	thentication type conflicts with this router's
261	authentication key or authentication type."
262	::= { ospfTraps 7 }
263
264
265	ospfIfRxBadPacket NOTIFICATION-TYPE
266	OBJECTS {
267	ospfRouterId, -- The originator of the trap
268	ospfIfIpAddress,
269	ospfAddressLessIf,
270	ospfPacketSrc, -- The source IP address
271	ospfPacketType
272	}
273	STATUS current
274	DESCRIPTION
275	"An ospfIfRxBadPacket trap signifies that an
276	OSPF packet has been received on a non-virtual
277	interface that cannot be parsed."
278	::= { ospfTraps 8 }
279
280	ospfVirtIfRxBadPacket NOTIFICATION-TYPE
281	OBJECTS {
282	ospfRouterId, -- The originator of the trap
283	ospfVirtIfAreaId,
284	ospfVirtIfNeighbor,
285	ospfPacketType
286	}
287	STATUS current
288	DESCRIPTION
289	"An ospfRxBadPacket trap signifies that an OSPF
290	packet has been received on a virtual interface
291	that cannot be parsed."
292	::= { ospfTraps 9 }
293
294
295	ospfTxRetransmit NOTIFICATION-TYPE
296	OBJECTS {
297	ospfRouterId, -- The originator of the trap
298	ospfIfIpAddress,
299	ospfAddressLessIf,
300	ospfNbrRtrId, -- Destination
301	ospfPacketType,
302	ospfLsdbType,
303	ospfLsdbLsid,
304	ospfLsdbRouterId
305	}
306	STATUS current
307	DESCRIPTION
308	"An ospfTxRetransmit trap signifies than an
309	OSPF packet has been retransmitted on a non-
310	virtual interface. All packets that may be re-
311	transmitted are associated with an LSDB entry.
312	The LS type, LS ID, and Router ID are used to
313	identify the LSDB entry."
314	::= { ospfTraps 10 }
315
316
317	ospfVirtIfTxRetransmit NOTIFICATION-TYPE
318	OBJECTS {
319	ospfRouterId, -- The originator of the trap
320	ospfVirtIfAreaId,
321	ospfVirtIfNeighbor,
322	ospfPacketType,
323	ospfLsdbType,
324	ospfLsdbLsid,
325	ospfLsdbRouterId
326	}
327	STATUS current
328	DESCRIPTION
329	"An ospfTxRetransmit trap signifies than an
330	OSPF packet has been retransmitted on a virtual
331	interface. All packets that may be retransmit-
332	ted are associated with an LSDB entry. The LS
333	type, LS ID, and Router ID are used to identify
334	the LSDB entry."
335	::= { ospfTraps 11 }
336
337
338	ospfOriginateLsa NOTIFICATION-TYPE
339	OBJECTS {
340	ospfRouterId, -- The originator of the trap
341	ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
342	ospfLsdbType,
343	ospfLsdbLsid,
344	ospfLsdbRouterId
345	}
346	STATUS current
347	DESCRIPTION
348	"An ospfOriginateLsa trap signifies that a new
349	LSA has been originated by this router. This
350	trap should not be invoked for simple refreshes
351	of LSAs (which happesn every 30 minutes), but
352	instead will only be invoked when an LSA is
353	(re)originated due to a topology change. Addi-
354	tionally, this trap does not include LSAs that
355	are being flushed because they have reached
356	MaxAge."
357	::= { ospfTraps 12 }
358
359
360	ospfMaxAgeLsa NOTIFICATION-TYPE
361	OBJECTS {
362	ospfRouterId, -- The originator of the trap
363	ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
364	ospfLsdbType,
365	ospfLsdbLsid,
366	ospfLsdbRouterId
367	}
368	STATUS current
369	DESCRIPTION
370	"An ospfMaxAgeLsa trap signifies that one of
371	the LSA in the router's link-state database has
372	aged to MaxAge."
373	::= { ospfTraps 13 }
374
375
376	ospfLsdbOverflow NOTIFICATION-TYPE
377	OBJECTS {
378	ospfRouterId, -- The originator of the trap
379	ospfExtLsdbLimit
380	}
381	STATUS current
382	DESCRIPTION
383	"An ospfLsdbOverflow trap signifies that the
384	number of LSAs in the router's link-state data-
385	base has exceeded ospfExtLsdbLimit."
386	::= { ospfTraps 14 }
387
388
389	ospfLsdbApproachingOverflow NOTIFICATION-TYPE
390	OBJECTS {
391	ospfRouterId, -- The originator of the trap
392	ospfExtLsdbLimit
393	}
394	STATUS current
395	DESCRIPTION
396	"An ospfLsdbApproachingOverflow trap signifies
397	that the number of LSAs in the router's link-
398	state database has exceeded ninety percent of
399	ospfExtLsdbLimit."
400	::= { ospfTraps 15 }
401
402
403	-- conformance information
404
405	ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }
406
407	ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
408	ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }
409
410	-- compliance statements
411
412	ospfTrapCompliance MODULE-COMPLIANCE
413	STATUS current
414	DESCRIPTION
415	"The compliance statement "
416	MODULE -- this module
417	MANDATORY-GROUPS { ospfTrapControlGroup }
418
419
420	GROUP ospfTrapControlGroup
421	DESCRIPTION
422	"This group is optional but recommended for all
423	OSPF systems"
424	::= { ospfTrapCompliances 1 }
425
426
427	-- units of conformance
428
429	ospfTrapControlGroup OBJECT-GROUP
430	OBJECTS {
431	ospfSetTrap,
432	ospfConfigErrorType,
433	ospfPacketType,
434	ospfPacketSrc
435	}
436	STATUS current
437	DESCRIPTION
438	"These objects are required to control traps
439	from OSPF systems."
440	::= { ospfTrapGroups 1 }
441
442
443	END