[mirror_frr.git] / ripd / RIPv2-MIB.txt

   RIPv2-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE, Counter32,
       TimeTicks, IpAddress                     FROM SNMPv2-SMI
       TEXTUAL-CONVENTION, RowStatus            FROM SNMPv2-TC
       MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
       mib-2                                    FROM RFC1213-MIB;

   --  This MIB module uses the extended OBJECT-TYPE macro as
   --  defined in [9].

   rip2  MODULE-IDENTITY
           LAST-UPDATED "9407272253Z"      -- Wed Jul 27 22:53:04 PDT 1994
           ORGANIZATION "IETF RIP-II Working Group"
           CONTACT-INFO
          "       Fred Baker
          Postal: Cisco Systems
                  519 Lado Drive
                  Santa Barbara, California 93111
          Tel:    +1 805 681 0115
          E-Mail: fbaker@cisco.com

          Postal: Gary Malkin
                  Xylogics, Inc.
                  53 Third Avenue
                  Burlington, MA  01803

          Phone:  (617) 272-8140
          EMail:  gmalkin@Xylogics.COM"
      DESCRIPTION
         "The MIB module to describe the RIP2 Version 2 Protocol"
     ::= { mib-2 23 }

 --  RIP-2 Management Information Base

 -- the RouteTag type represents the contents of the
 -- Route Domain field in the packet header or route entry.
 -- The use of the Route Domain is deprecated.

 RouteTag ::= TEXTUAL-CONVENTION
     STATUS      current
     DESCRIPTION
        "the RouteTag type represents the contents of the Route Domain
        field in the packet header or route entry"
    SYNTAX      OCTET STRING (SIZE (2))

--4.1 Global Counters

--      The RIP-2 Globals Group.
--      Implementation of this group is mandatory for systems
--      which implement RIP-2.

-- These counters are intended to facilitate debugging quickly
-- changing routes or failing neighbors

rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }

    rip2GlobalRouteChanges OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of route changes made to the IP Route
           Database by RIP.  This does not include the refresh
           of a route's age."
       ::= { rip2Globals 1 }

    rip2GlobalQueries OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of responses sent to RIP queries
           from other systems."
       ::= { rip2Globals 2 }

--4.2 RIP Interface Tables

--  RIP Interfaces Groups
--  Implementation of these Groups is mandatory for systems
--  which implement RIP-2.

-- The RIP Interface Status Table.

    rip2IfStatTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF Rip2IfStatEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A list of subnets which require separate
           status monitoring in RIP."
       ::= { rip2 2 }

   rip2IfStatEntry OBJECT-TYPE
       SYNTAX   Rip2IfStatEntry
       MAX-ACCESS   not-accessible
       STATUS   current
       DESCRIPTION
          "A Single Routing Domain in a single Subnet."
      INDEX { rip2IfStatAddress }
      ::= { rip2IfStatTable 1 }

    Rip2IfStatEntry ::=
        SEQUENCE {
            rip2IfStatAddress
                IpAddress,
            rip2IfStatRcvBadPackets
                Counter32,
            rip2IfStatRcvBadRoutes
                Counter32,
            rip2IfStatSentUpdates
                Counter32,
            rip2IfStatStatus
                RowStatus
    }

    rip2IfStatAddress OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP Address of this system on the indicated
           subnet. For unnumbered interfaces, the value 0.0.0.N,
           where the least significant 24 bits (N) is the ifIndex
           for the IP Interface in network byte order."
       ::= { rip2IfStatEntry 1 }

    rip2IfStatRcvBadPackets OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of RIP response packets received by
           the RIP process which were subsequently discarded
           for any reason (e.g. a version 0 packet, or an
           unknown command type)."
       ::= { rip2IfStatEntry 2 }

    rip2IfStatRcvBadRoutes OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of routes, in valid RIP packets,
           which were ignored for any reason (e.g. unknown
           address family, or invalid metric)."
       ::= { rip2IfStatEntry 3 }

    rip2IfStatSentUpdates OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of triggered RIP updates actually
           sent on this interface.  This explicitly does
           NOT include full updates sent containing new
           information."
       ::= { rip2IfStatEntry 4 }

    rip2IfStatStatus OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "Writing invalid has the effect of deleting
           this interface."
       ::= { rip2IfStatEntry 5 }

-- The RIP Interface Configuration Table.

    rip2IfConfTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF Rip2IfConfEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A list of subnets which require separate
           configuration in RIP."
       ::= { rip2 3 }

   rip2IfConfEntry OBJECT-TYPE
       SYNTAX   Rip2IfConfEntry
       MAX-ACCESS   not-accessible
       STATUS   current
       DESCRIPTION
          "A Single Routing Domain in a single Subnet."
      INDEX { rip2IfConfAddress }
      ::= { rip2IfConfTable 1 }

    Rip2IfConfEntry ::=
        SEQUENCE {
            rip2IfConfAddress
                IpAddress,
            rip2IfConfDomain
                RouteTag,
            rip2IfConfAuthType
                INTEGER,
            rip2IfConfAuthKey
                OCTET STRING (SIZE(0..16)),
            rip2IfConfSend
                INTEGER,
            rip2IfConfReceive
                INTEGER,
            rip2IfConfDefaultMetric
                INTEGER,
            rip2IfConfStatus
                RowStatus,
            rip2IfConfSrcAddress
                IpAddress
    }

    rip2IfConfAddress OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP Address of this system on the indicated
           subnet.  For unnumbered interfaces, the value 0.0.0.N,
           where the least significant 24 bits (N) is the ifIndex
           for the IP Interface in network byte order."
       ::= { rip2IfConfEntry 1 }

    rip2IfConfDomain OBJECT-TYPE
        SYNTAX   RouteTag
        MAX-ACCESS   read-create
        STATUS   obsolete
        DESCRIPTION
           "Value inserted into the Routing Domain field
           of all RIP packets sent on this interface."
       DEFVAL { '0000'h }
       ::= { rip2IfConfEntry 2 }

    rip2IfConfAuthType OBJECT-TYPE
        SYNTAX   INTEGER {
                    noAuthentication (1),
                    simplePassword (2),
                    md5 (3)
                 }
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The type of Authentication used on this
           interface."
       DEFVAL { noAuthentication }
       ::= { rip2IfConfEntry 3 }

    rip2IfConfAuthKey OBJECT-TYPE
        SYNTAX   OCTET STRING (SIZE(0..16))
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The value to be used as the Authentication Key
           whenever the corresponding instance of
           rip2IfConfAuthType has a value other than
           noAuthentication.  A modification of the corresponding
           instance of rip2IfConfAuthType does not modify
           the rip2IfConfAuthKey value.  If a string shorter
           than 16 octets is supplied, it will be left-
           justified and padded to 16 octets, on the right,
           with nulls (0x00).

           Reading this object always results in an  OCTET
           STRING of length zero; authentication may not
           be bypassed by reading the MIB object."
       DEFVAL { ''h }
       ::= { rip2IfConfEntry 4 }

    rip2IfConfSend OBJECT-TYPE
        SYNTAX   INTEGER {
                    doNotSend (1),
                    ripVersion1 (2),
                    rip1Compatible (3),
                    ripVersion2 (4),
                    ripV1Demand (5),
                    ripV2Demand (6)
                 }
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "What the router sends on this interface.
           ripVersion1 implies sending RIP updates compliant
           with  RFC  1058.   rip1Compatible implies
           broadcasting RIP-2 updates using RFC 1058 route
           subsumption rules.  ripVersion2 implies
           multicasting RIP-2 updates.  ripV1Demand indicates
           the use of Demand RIP on a WAN interface under RIP
           Version 1 rules.  ripV2Demand indicates the use of
           Demand RIP on a WAN interface under Version 2 rules."
       DEFVAL { rip1Compatible }
       ::= { rip2IfConfEntry 5 }

    rip2IfConfReceive OBJECT-TYPE
        SYNTAX   INTEGER {
                    rip1 (1),
                    rip2 (2),
                    rip1OrRip2 (3),
                    doNotRecieve (4)
                 }
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "This indicates which version of RIP updates
           are to be accepted.  Note that rip2 and
           rip1OrRip2 implies reception of multicast
           packets."
       DEFVAL { rip1OrRip2 }
       ::= { rip2IfConfEntry 6 }

    rip2IfConfDefaultMetric OBJECT-TYPE
        SYNTAX   INTEGER ( 0..15 )
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "This variable indicates the metric that is to
           be used for the default route entry in RIP updates
           originated on this interface.  A value of zero
           indicates that no default route should be
           originated; in this case, a default route via
           another router may be propagated."
       ::= { rip2IfConfEntry 7 }

    rip2IfConfStatus OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "Writing invalid has  the  effect  of  deleting
           this interface."
       ::= { rip2IfConfEntry 8 }

    rip2IfConfSrcAddress OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The IP Address this system will use as a source
            address on this interface.  If it is a numbered
            interface, this MUST be the same value as
            rip2IfConfAddress.  On unnumbered interfaces,
            it must be the value of rip2IfConfAddress for
            some interface on the system."
       ::= { rip2IfConfEntry 9 }

--4.3 Peer Table

--  Peer Table

--      The RIP Peer Group
--      Implementation of this Group is Optional

--      This group provides information about active peer
--      relationships intended to assist in debugging.  An
--      active peer is a router from which a valid RIP
--      updated has been heard in the last 180 seconds.

    rip2PeerTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF Rip2PeerEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A list of RIP Peers."
       ::= { rip2 4 }

   rip2PeerEntry OBJECT-TYPE
       SYNTAX   Rip2PeerEntry
       MAX-ACCESS   not-accessible
       STATUS   current
       DESCRIPTION
          "Information regarding a single routing peer."
      INDEX { rip2PeerAddress, rip2PeerDomain }
      ::= { rip2PeerTable 1 }

    Rip2PeerEntry ::=
        SEQUENCE {
            rip2PeerAddress
                IpAddress,
            rip2PeerDomain
                RouteTag,
            rip2PeerLastUpdate
                TimeTicks,
            rip2PeerVersion
                INTEGER,
            rip2PeerRcvBadPackets
                Counter32,
            rip2PeerRcvBadRoutes
                Counter32
            }

    rip2PeerAddress OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP Address that the peer is using as its source
            address.  Note that on an unnumbered link, this may
            not be a member of any subnet on the system."
       ::= { rip2PeerEntry 1 }

    rip2PeerDomain OBJECT-TYPE
        SYNTAX   RouteTag
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The value in the Routing Domain field  in  RIP
           packets received from the peer.  As domain suuport
           is deprecated, this must be zero."
       ::= { rip2PeerEntry 2 }

    rip2PeerLastUpdate OBJECT-TYPE
        SYNTAX   TimeTicks
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The value of sysUpTime when the most recent
           RIP update was received from this system."
       ::= { rip2PeerEntry 3 }

    rip2PeerVersion OBJECT-TYPE
        SYNTAX   INTEGER ( 0..255 )
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The RIP version number in the header of the
           last RIP packet received."
       ::= { rip2PeerEntry 4 }

    rip2PeerRcvBadPackets OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of RIP response packets from this
           peer discarded as invalid."
       ::= { rip2PeerEntry 5 }


    rip2PeerRcvBadRoutes OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of routes from this peer that were
           ignored because the entry format was invalid."
       ::= { rip2PeerEntry 6 }

-- conformance information

rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }

rip2Groups      OBJECT IDENTIFIER ::= { rip2Conformance 1 }
rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }

-- compliance statements
rip2Compliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
       "The compliance statement "
    MODULE  -- this module
    MANDATORY-GROUPS {
                 rip2GlobalGroup,
                 rip2IfStatGroup,
                 rip2IfConfGroup,
                 rip2PeerGroup
        }
    GROUP       rip2GlobalGroup
    DESCRIPTION
       "This group defines global controls for RIP-II systems."
    GROUP       rip2IfStatGroup
    DESCRIPTION
       "This group defines interface statistics for RIP-II systems."
    GROUP       rip2IfConfGroup
    DESCRIPTION
       "This group defines interface configuration for RIP-II systems."
    GROUP       rip2PeerGroup
    DESCRIPTION
       "This group defines peer information for RIP-II systems."
    ::= { rip2Compliances 1 }

-- units of conformance

rip2GlobalGroup    OBJECT-GROUP
    OBJECTS {
                rip2GlobalRouteChanges,
                rip2GlobalQueries
    }
    STATUS  current
    DESCRIPTION
       "This group defines global controls for RIP-II systems."
    ::= { rip2Groups 1 }
rip2IfStatGroup    OBJECT-GROUP
    OBJECTS {
            rip2IfStatAddress,
            rip2IfStatRcvBadPackets,
            rip2IfStatRcvBadRoutes,
            rip2IfStatSentUpdates,
            rip2IfStatStatus
    }
    STATUS  current
    DESCRIPTION
       "This group defines interface statistics for RIP-II systems."
    ::= { rip2Groups 2 }
rip2IfConfGroup    OBJECT-GROUP
    OBJECTS {
            rip2IfConfAddress,
            rip2IfConfAuthType,
            rip2IfConfAuthKey,
            rip2IfConfSend,
            rip2IfConfReceive,
            rip2IfConfDefaultMetric,
            rip2IfConfStatus,
            rip2IfConfSrcAddress
    }
    STATUS  current
    DESCRIPTION
       "This group defines interface configuration for RIP-II systems."
    ::= { rip2Groups 3 }
rip2PeerGroup    OBJECT-GROUP
    OBJECTS {
            rip2PeerAddress,
            rip2PeerDomain,
            rip2PeerLastUpdate,
            rip2PeerVersion,
            rip2PeerRcvBadPackets,
            rip2PeerRcvBadRoutes
    }
    STATUS  current
    DESCRIPTION
       "This group defines peer information for RIP-II systems."
    ::= { rip2Groups 4 }
END
Commit	Line	Data
718e3744	1	RIPv2-MIB DEFINITIONS ::= BEGIN
	2
	3	IMPORTS
	4	MODULE-IDENTITY, OBJECT-TYPE, Counter32,
	5	TimeTicks, IpAddress FROM SNMPv2-SMI
	6	TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC
	7	MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
	8	mib-2 FROM RFC1213-MIB;
	9
	10	-- This MIB module uses the extended OBJECT-TYPE macro as
	11	-- defined in [9].
	12
	13	rip2 MODULE-IDENTITY
	14	LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994
	15	ORGANIZATION "IETF RIP-II Working Group"
	16	CONTACT-INFO
	17	" Fred Baker
	18	Postal: Cisco Systems
	19	519 Lado Drive
	20	Santa Barbara, California 93111
	21	Tel: +1 805 681 0115
	22	E-Mail: fbaker@cisco.com
	23
	24	Postal: Gary Malkin
	25	Xylogics, Inc.
	26	53 Third Avenue
	27	Burlington, MA 01803
	28
	29	Phone: (617) 272-8140
	30	EMail: gmalkin@Xylogics.COM"
	31	DESCRIPTION
	32	"The MIB module to describe the RIP2 Version 2 Protocol"
	33	::= { mib-2 23 }
	34
	35	-- RIP-2 Management Information Base
	36
	37	-- the RouteTag type represents the contents of the
	38	-- Route Domain field in the packet header or route entry.
	39	-- The use of the Route Domain is deprecated.
	40
	41	RouteTag ::= TEXTUAL-CONVENTION
	42	STATUS current
	43	DESCRIPTION
	44	"the RouteTag type represents the contents of the Route Domain
	45	field in the packet header or route entry"
	46	SYNTAX OCTET STRING (SIZE (2))
	47
	48	--4.1 Global Counters
	49
	50	-- The RIP-2 Globals Group.
	51	-- Implementation of this group is mandatory for systems
	52	-- which implement RIP-2.
	53
	54	-- These counters are intended to facilitate debugging quickly
	55	-- changing routes or failing neighbors
	56
	57	rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }
	58
	59	rip2GlobalRouteChanges OBJECT-TYPE
	60	SYNTAX Counter32
	61	MAX-ACCESS read-only
	62	STATUS current
	63	DESCRIPTION
	64	"The number of route changes made to the IP Route
65	Database by RIP. This does not include the refresh
66	of a route's age."
67	::= { rip2Globals 1 }
68
69	rip2GlobalQueries OBJECT-TYPE
70	SYNTAX Counter32
71	MAX-ACCESS read-only
72	STATUS current
73	DESCRIPTION
74	"The number of responses sent to RIP queries
75	from other systems."
76	::= { rip2Globals 2 }
77
78	--4.2 RIP Interface Tables
79
80	-- RIP Interfaces Groups
81	-- Implementation of these Groups is mandatory for systems
82	-- which implement RIP-2.
83
84	-- The RIP Interface Status Table.
85
86	rip2IfStatTable OBJECT-TYPE
87	SYNTAX SEQUENCE OF Rip2IfStatEntry
88	MAX-ACCESS not-accessible
89	STATUS current
90	DESCRIPTION
91	"A list of subnets which require separate
92	status monitoring in RIP."
93	::= { rip2 2 }
94
95	rip2IfStatEntry OBJECT-TYPE
96	SYNTAX Rip2IfStatEntry
97	MAX-ACCESS not-accessible
98	STATUS current
99	DESCRIPTION
100	"A Single Routing Domain in a single Subnet."
101	INDEX { rip2IfStatAddress }
102	::= { rip2IfStatTable 1 }
103
104	Rip2IfStatEntry ::=
105	SEQUENCE {
106	rip2IfStatAddress
107	IpAddress,
108	rip2IfStatRcvBadPackets
109	Counter32,
110	rip2IfStatRcvBadRoutes
111	Counter32,
112	rip2IfStatSentUpdates
113	Counter32,
114	rip2IfStatStatus
115	RowStatus
116	}
117
118	rip2IfStatAddress OBJECT-TYPE
119	SYNTAX IpAddress
120	MAX-ACCESS read-only
121	STATUS current
122	DESCRIPTION
123	"The IP Address of this system on the indicated
124	subnet. For unnumbered interfaces, the value 0.0.0.N,
125	where the least significant 24 bits (N) is the ifIndex
126	for the IP Interface in network byte order."
127	::= { rip2IfStatEntry 1 }
128
129	rip2IfStatRcvBadPackets OBJECT-TYPE
130	SYNTAX Counter32
131	MAX-ACCESS read-only
132	STATUS current
133	DESCRIPTION
134	"The number of RIP response packets received by
135	the RIP process which were subsequently discarded
136	for any reason (e.g. a version 0 packet, or an
137	unknown command type)."
138	::= { rip2IfStatEntry 2 }
139
140	rip2IfStatRcvBadRoutes OBJECT-TYPE
141	SYNTAX Counter32
142	MAX-ACCESS read-only
143	STATUS current
144	DESCRIPTION
145	"The number of routes, in valid RIP packets,
146	which were ignored for any reason (e.g. unknown
147	address family, or invalid metric)."
148	::= { rip2IfStatEntry 3 }
149
150	rip2IfStatSentUpdates OBJECT-TYPE
151	SYNTAX Counter32
152	MAX-ACCESS read-only
153	STATUS current
154	DESCRIPTION
155	"The number of triggered RIP updates actually
156	sent on this interface. This explicitly does
157	NOT include full updates sent containing new
158	information."
159	::= { rip2IfStatEntry 4 }
160
161	rip2IfStatStatus OBJECT-TYPE
162	SYNTAX RowStatus
163	MAX-ACCESS read-create
164	STATUS current
165	DESCRIPTION
166	"Writing invalid has the effect of deleting
167	this interface."
168	::= { rip2IfStatEntry 5 }
169
170	-- The RIP Interface Configuration Table.
171
172	rip2IfConfTable OBJECT-TYPE
173	SYNTAX SEQUENCE OF Rip2IfConfEntry
174	MAX-ACCESS not-accessible
175	STATUS current
176	DESCRIPTION
177	"A list of subnets which require separate
178	configuration in RIP."
179	::= { rip2 3 }
180
181	rip2IfConfEntry OBJECT-TYPE
182	SYNTAX Rip2IfConfEntry
183	MAX-ACCESS not-accessible
184	STATUS current
185	DESCRIPTION
186	"A Single Routing Domain in a single Subnet."
187	INDEX { rip2IfConfAddress }
188	::= { rip2IfConfTable 1 }
189
190	Rip2IfConfEntry ::=
191	SEQUENCE {
192	rip2IfConfAddress
193	IpAddress,
194	rip2IfConfDomain
195	RouteTag,
196	rip2IfConfAuthType
197	INTEGER,
198	rip2IfConfAuthKey
199	OCTET STRING (SIZE(0..16)),
200	rip2IfConfSend
201	INTEGER,
202	rip2IfConfReceive
203	INTEGER,
204	rip2IfConfDefaultMetric
205	INTEGER,
206	rip2IfConfStatus
207	RowStatus,
208	rip2IfConfSrcAddress
209	IpAddress
210	}
211
212	rip2IfConfAddress OBJECT-TYPE
213	SYNTAX IpAddress
214	MAX-ACCESS read-only
215	STATUS current
216	DESCRIPTION
217	"The IP Address of this system on the indicated
218	subnet. For unnumbered interfaces, the value 0.0.0.N,
219	where the least significant 24 bits (N) is the ifIndex
220	for the IP Interface in network byte order."
221	::= { rip2IfConfEntry 1 }
222
223	rip2IfConfDomain OBJECT-TYPE
224	SYNTAX RouteTag
225	MAX-ACCESS read-create
226	STATUS obsolete
227	DESCRIPTION
228	"Value inserted into the Routing Domain field
229	of all RIP packets sent on this interface."
230	DEFVAL { '0000'h }
231	::= { rip2IfConfEntry 2 }
232
233	rip2IfConfAuthType OBJECT-TYPE
234	SYNTAX INTEGER {
235	noAuthentication (1),
236	simplePassword (2),
237	md5 (3)
238	}
239	MAX-ACCESS read-create
240	STATUS current
241	DESCRIPTION
242	"The type of Authentication used on this
243	interface."
244	DEFVAL { noAuthentication }
245	::= { rip2IfConfEntry 3 }
246
247	rip2IfConfAuthKey OBJECT-TYPE
248	SYNTAX OCTET STRING (SIZE(0..16))
249	MAX-ACCESS read-create
250	STATUS current
251	DESCRIPTION
252	"The value to be used as the Authentication Key
253	whenever the corresponding instance of
254	rip2IfConfAuthType has a value other than
255	noAuthentication. A modification of the corresponding
256	instance of rip2IfConfAuthType does not modify
257	the rip2IfConfAuthKey value. If a string shorter
258	than 16 octets is supplied, it will be left-
259	justified and padded to 16 octets, on the right,
260	with nulls (0x00).
261
262	Reading this object always results in an OCTET
263	STRING of length zero; authentication may not
264	be bypassed by reading the MIB object."
265	DEFVAL { ''h }
266	::= { rip2IfConfEntry 4 }
267
268	rip2IfConfSend OBJECT-TYPE
269	SYNTAX INTEGER {
270	doNotSend (1),
271	ripVersion1 (2),
272	rip1Compatible (3),
273	ripVersion2 (4),
274	ripV1Demand (5),
275	ripV2Demand (6)
276	}
277	MAX-ACCESS read-create
278	STATUS current
279	DESCRIPTION
280	"What the router sends on this interface.
281	ripVersion1 implies sending RIP updates compliant
282	with RFC 1058. rip1Compatible implies
283	broadcasting RIP-2 updates using RFC 1058 route
284	subsumption rules. ripVersion2 implies
285	multicasting RIP-2 updates. ripV1Demand indicates
286	the use of Demand RIP on a WAN interface under RIP
287	Version 1 rules. ripV2Demand indicates the use of
288	Demand RIP on a WAN interface under Version 2 rules."
289	DEFVAL { rip1Compatible }
290	::= { rip2IfConfEntry 5 }
291
292	rip2IfConfReceive OBJECT-TYPE
293	SYNTAX INTEGER {
294	rip1 (1),
295	rip2 (2),
296	rip1OrRip2 (3),
297	doNotRecieve (4)
298	}
299	MAX-ACCESS read-create
300	STATUS current
301	DESCRIPTION
302	"This indicates which version of RIP updates
303	are to be accepted. Note that rip2 and
304	rip1OrRip2 implies reception of multicast
305	packets."
306	DEFVAL { rip1OrRip2 }
307	::= { rip2IfConfEntry 6 }
308
309	rip2IfConfDefaultMetric OBJECT-TYPE
310	SYNTAX INTEGER ( 0..15 )
311	MAX-ACCESS read-create
312	STATUS current
313	DESCRIPTION
314	"This variable indicates the metric that is to
315	be used for the default route entry in RIP updates
316	originated on this interface. A value of zero
317	indicates that no default route should be
318	originated; in this case, a default route via
319	another router may be propagated."
320	::= { rip2IfConfEntry 7 }
321
322	rip2IfConfStatus OBJECT-TYPE
323	SYNTAX RowStatus
324	MAX-ACCESS read-create
325	STATUS current
326	DESCRIPTION
327	"Writing invalid has the effect of deleting
328	this interface."
329	::= { rip2IfConfEntry 8 }
330
331	rip2IfConfSrcAddress OBJECT-TYPE
332	SYNTAX IpAddress
333	MAX-ACCESS read-create
334	STATUS current
335	DESCRIPTION
336	"The IP Address this system will use as a source
337	address on this interface. If it is a numbered
338	interface, this MUST be the same value as
339	rip2IfConfAddress. On unnumbered interfaces,
340	it must be the value of rip2IfConfAddress for
341	some interface on the system."
342	::= { rip2IfConfEntry 9 }
343
344	--4.3 Peer Table
345
346	-- Peer Table
347
348	-- The RIP Peer Group
349	-- Implementation of this Group is Optional
350
351	-- This group provides information about active peer
352	-- relationships intended to assist in debugging. An
353	-- active peer is a router from which a valid RIP
354	-- updated has been heard in the last 180 seconds.
355
356	rip2PeerTable OBJECT-TYPE
357	SYNTAX SEQUENCE OF Rip2PeerEntry
358	MAX-ACCESS not-accessible
359	STATUS current
360	DESCRIPTION
361	"A list of RIP Peers."
362	::= { rip2 4 }
363
364	rip2PeerEntry OBJECT-TYPE
365	SYNTAX Rip2PeerEntry
366	MAX-ACCESS not-accessible
367	STATUS current
368	DESCRIPTION
369	"Information regarding a single routing peer."
370	INDEX { rip2PeerAddress, rip2PeerDomain }
371	::= { rip2PeerTable 1 }
372
373	Rip2PeerEntry ::=
374	SEQUENCE {
375	rip2PeerAddress
376	IpAddress,
377	rip2PeerDomain
378	RouteTag,
379	rip2PeerLastUpdate
380	TimeTicks,
381	rip2PeerVersion
382	INTEGER,
383	rip2PeerRcvBadPackets
384	Counter32,
385	rip2PeerRcvBadRoutes
386	Counter32
387	}
388
389	rip2PeerAddress OBJECT-TYPE
390	SYNTAX IpAddress
391	MAX-ACCESS read-only
392	STATUS current
393	DESCRIPTION
394	"The IP Address that the peer is using as its source
395	address. Note that on an unnumbered link, this may
396	not be a member of any subnet on the system."
397	::= { rip2PeerEntry 1 }
398
399	rip2PeerDomain OBJECT-TYPE
400	SYNTAX RouteTag
401	MAX-ACCESS read-only
402	STATUS current
403	DESCRIPTION
404	"The value in the Routing Domain field in RIP
405	packets received from the peer. As domain suuport
406	is deprecated, this must be zero."
407	::= { rip2PeerEntry 2 }
408
409	rip2PeerLastUpdate OBJECT-TYPE
410	SYNTAX TimeTicks
411	MAX-ACCESS read-only
412	STATUS current
413	DESCRIPTION
414	"The value of sysUpTime when the most recent
415	RIP update was received from this system."
416	::= { rip2PeerEntry 3 }
417
418	rip2PeerVersion OBJECT-TYPE
419	SYNTAX INTEGER ( 0..255 )
420	MAX-ACCESS read-only
421	STATUS current
422	DESCRIPTION
423	"The RIP version number in the header of the
424	last RIP packet received."
425	::= { rip2PeerEntry 4 }
426
427	rip2PeerRcvBadPackets OBJECT-TYPE
428	SYNTAX Counter32
429	MAX-ACCESS read-only
430	STATUS current
431	DESCRIPTION
432	"The number of RIP response packets from this
433	peer discarded as invalid."
434	::= { rip2PeerEntry 5 }
435
436
437	rip2PeerRcvBadRoutes OBJECT-TYPE
438	SYNTAX Counter32
439	MAX-ACCESS read-only
440	STATUS current
441	DESCRIPTION
442	"The number of routes from this peer that were
443	ignored because the entry format was invalid."
444	::= { rip2PeerEntry 6 }
445
446	-- conformance information
447
448	rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }
449
450	rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 }
451	rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }
452
453	-- compliance statements
454	rip2Compliance MODULE-COMPLIANCE
455	STATUS current
456	DESCRIPTION
457	"The compliance statement "
458	MODULE -- this module
459	MANDATORY-GROUPS {
460	rip2GlobalGroup,
461	rip2IfStatGroup,
462	rip2IfConfGroup,
463	rip2PeerGroup
464	}
465	GROUP rip2GlobalGroup
466	DESCRIPTION
467	"This group defines global controls for RIP-II systems."
468	GROUP rip2IfStatGroup
469	DESCRIPTION
470	"This group defines interface statistics for RIP-II systems."
471	GROUP rip2IfConfGroup
472	DESCRIPTION
473	"This group defines interface configuration for RIP-II systems."
474	GROUP rip2PeerGroup
475	DESCRIPTION
476	"This group defines peer information for RIP-II systems."
477	::= { rip2Compliances 1 }
478
479	-- units of conformance
480
481	rip2GlobalGroup OBJECT-GROUP
482	OBJECTS {
483	rip2GlobalRouteChanges,
484	rip2GlobalQueries
485	}
486	STATUS current
487	DESCRIPTION
488	"This group defines global controls for RIP-II systems."
489	::= { rip2Groups 1 }
490	rip2IfStatGroup OBJECT-GROUP
491	OBJECTS {
492	rip2IfStatAddress,
493	rip2IfStatRcvBadPackets,
494	rip2IfStatRcvBadRoutes,
495	rip2IfStatSentUpdates,
496	rip2IfStatStatus
497	}
498	STATUS current
499	DESCRIPTION
500	"This group defines interface statistics for RIP-II systems."
501	::= { rip2Groups 2 }
502	rip2IfConfGroup OBJECT-GROUP
503	OBJECTS {
504	rip2IfConfAddress,
505	rip2IfConfAuthType,
506	rip2IfConfAuthKey,
507	rip2IfConfSend,
508	rip2IfConfReceive,
509	rip2IfConfDefaultMetric,
510	rip2IfConfStatus,
511	rip2IfConfSrcAddress
512	}
513	STATUS current
514	DESCRIPTION
515	"This group defines interface configuration for RIP-II systems."
516	::= { rip2Groups 3 }
517	rip2PeerGroup OBJECT-GROUP
518	OBJECTS {
519	rip2PeerAddress,
520	rip2PeerDomain,
521	rip2PeerLastUpdate,
522	rip2PeerVersion,
523	rip2PeerRcvBadPackets,
524	rip2PeerRcvBadRoutes
525	}
526	STATUS current
527	DESCRIPTION
528	"This group defines peer information for RIP-II systems."
529	::= { rip2Groups 4 }
530	END