+++ /dev/null
-#!/usr/bin/make -f
-
-# FRRouting Configuration options
-######################################
-#
-# WANT_xxxx --> Set to 1 for enable, 0 for disable
-# The following are the defaults. They can be overridden by setting a
-# env variable to a different value
-
-WANT_LDP ?= 1
-WANT_PIM ?= 1
-WANT_OSPFAPI ?= 1
-WANT_BGP_VNC ?= 1
-WANT_CUMULUS_MODE ?= 0
-WANT_MULTIPATH ?= 1
-WANT_SNMP ?= 0
-WANT_RPKI ?= 0
-WANT_BFD ?= 1
-
-# NOTES:
-#
-# If you use WANT_RPKI, then there is a new dependency for librtr0 package
-# and a build dependency of the librtr-dev package.
-# While the librtr0 is added to the depenencies automatically, the build
-# dependency can't be changed dynamically and building will fail if the
-# librtr-dev isn't installed during package build
-# Tested versions of both packages can be found at
-# https://ci1.netdef.org/browse/RPKI-RTRLIB/latestSuccessful/artifact
-#
-# If multipath is enabled (WANT_MULTIPATH=1), then set number of multipaths here
-# Please be aware that 0 is NOT disabled, but treated as unlimited
-
-MULTIPATH ?= 256
-
-# Set the following to the value required (or leave alone for the default below)
-# WANT_FRR_USER is used for the username and groupname of the FRR user account
-
-WANT_FRR_USER ?= frr
-WANT_FRR_VTY_GROUP ?= frrvty
-
-# Don't build PDF docs by default
-GENERATE_PDF ?= 0
-
-#
-####################################
-
-export DH_VERBOSE=1
-export DEB_BUILD_MAINT_OPTIONS = hardening=+all
-export DH_OPTIONS=-v
-
-ifeq ($(WANT_SNMP), 1)
- USE_SNMP=--enable-snmp
- $(warning "DEBIAN: SNMP enabled, sorry for your inconvenience")
-else
- USE_SNMP=--disable-snmp
- $(warning "DEBIAN: SNMP disabled, see README.Debian")
-endif
-
-ifeq ($(WANT_LDP), 1)
- USE_LDP=--enable-ldpd
-else
- USE_LDP=--disable-ldpd
-endif
-
-ifeq ($(WANT_PIM), 1)
- USE_PIM=--enable-pimd
-else
- USE_PIM=--disable-pimd
-endif
-
-ifeq ($(WANT_OSPFAPI), 1)
- USE_OSPFAPI=--enable-ospfapi=yes
-else
- USE_OSPFAPI=--enable-ospfapi=no
-endif
-
-ifeq ($(WANT_BGP_VNC), 1)
- USE_BGP_VNC=--enable-bgp-vnc=yes
-else
- USE_BGP_VNC=--enable-bgp-vnc=no
-endif
-
-USE_FRR_USER=--enable-user=$(WANT_FRR_USER)
-USE_FRR_GROUP=--enable-group=$(WANT_FRR_USER)
-USE_FRR_VTY_GROUP=--enable-vty-group=$(WANT_FRR_VTY_GROUP)
-
-ifeq ($(WANT_MULTIPATH), 1)
- USE_MULTIPATH=--enable-multipath=$(MULTIPATH)
-else
- USE_MULTIPATH=--disable-multipath
-endif
-
-ifeq ($(WANT_CUMULUS_MODE), 1)
- USE_CUMULUS=--enable-cumulus=yes
-else
- USE_CUMULUS=--enable-cumulus=no
-endif
-
-ifeq ($(WANT_RPKI), 1)
- USE_RPKI=--enable-rpki
-else
- USE_RPKI=--disable-rpki
-endif
-
-ifeq ($(WANT_BFD), 1)
- USE_BFD=--enable-bfdd
-else
- USE_BFD=--disable-bfdd
-endif
-
-ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
- DEBIAN_JOBS := $(subst parallel=,,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
-endif
-
-ifdef DEBIAN_JOBS
-MAKEFLAGS += -j$(DEBIAN_JOBS)
-endif
-
-%:
- dh $@ --with=systemd,autoreconf --parallel --dbg-package=frr-dbg --list-missing
-
-override_dh_gencontrol:
-ifeq ($(WANT_RPKI), 1)
- dh_gencontrol -- -Vdist:Depends="librtr0 (>= 0.5)"
-else
- dh_gencontrol
-endif
-
-override_dh_auto_configure:
- # Frr needs /proc to check some BSD vs Linux specific stuff.
- # Else it fails with an obscure error message pointing out that
- # IPCTL_FORWARDING is an undefined symbol which is not very helpful.
- @if ! [ -d /proc/1 ]; then \
- echo "./configure needs a mounted /proc"; \
- exit 1; \
- fi
-
- if ! [ -e config.status ]; then \
- dh_auto_configure -- \
- --enable-exampledir=/usr/share/doc/frr/examples/ \
- --localstatedir=/var/run/frr \
- --sbindir=/usr/lib/frr \
- --sysconfdir=/etc/frr \
- $(USE_SNMP) \
- $(USE_OSPFAPI) \
- $(USE_MULTIPATH) \
- $(USE_LDP) \
- --enable-fpm \
- $(USE_FRR_USER) $(USE_FRR_GROUP) \
- $(USE_FRR_VTY_GROUP) \
- --enable-configfile-mask=0640 \
- --enable-logfile-mask=0640 \
- --enable-werror \
- --with-libpam \
- --enable-systemd=yes \
- --enable-poll=yes \
- $(USE_CUMULUS) \
- $(USE_PIM) \
- --enable-dependency-tracking \
- $(USE_BGP_VNC) \
- $(USE_RPKI) \
- $(USE_BFD) \
- $(shell dpkg-buildflags --export=configure); \
- fi
-
-override_dh_auto_build:
- # doc/ is a bit crazy
-ifeq ($(GENERATE_PDF), 1)
- dh_auto_build -- -C doc pdf
-endif
- rm -vf doc/user/_build/texinfo/frr.info
- dh_auto_build -- -C doc info
-
-override_dh_auto_test:
-
-override_dh_auto_install:
- dh_auto_install
-
- # installed in frr-pythontools
- rm debian/tmp/usr/lib/frr/frr-reload.py
-
- # cleaning up the info dir
- rm -f debian/tmp/usr/share/info/dir*
-
- # install config files
- mkdir -p debian/tmp/etc/frr/
- perl -pi -e 's#^!log file #!log file /var/log/frr/#' debian/tmp/usr/share/doc/frr/examples/*sample*
-
- # leftover from previously shipping SMUX client OID MIB
- mkdir -p debian/tmp/usr/share/snmp/mibs/
-
- # cleaning .la files
- sed -i "/dependency_libs/ s/'.*'/''/" debian/tmp/usr/lib/*.la
- sed -i "/dependency_libs/ s/'.*'/''/" debian/tmp/usr/lib/frr/modules/*.la
-
-override_dh_systemd_start:
- dh_systemd_start frr.service
-
-override_dh_systemd_enable:
- dh_systemd_enable frr.service
-
-# backports
-SRCPKG = frr
-KNOWN_BACKPORTS = debian8 debian9 ubuntu12.04 ubuntu14.04 ubuntu16.04 ubuntu17.10 ubuntu18.04
-DEBIAN_VERSION := $(shell dh_testdir && \
- dpkg-parsechangelog -c1 < debian/changelog | \
- sed -rn 's/^Version: ?//p')
-ORIG_VERSION := $(DEBIAN_VERSION)
--include debian/backports/rules
-
-ifneq ($(TARBALLDIR),)
-ifeq ($(wildcard frr-$(ORIG_VERSION).tar.gz),frr-$(ORIG_VERSION).tar.gz)
-
-$(TARBALLDIR)/$(SRCPKG)_$(ORIG_VERSION).orig.tar.gz: \
- frr-$(ORIG_VERSION).tar.gz
- cp $< $@
-
-else # wildcard frr-$(ORIG_VERSION).tar.gz
-
-# better error message on missing .orig.tar.gz
-$(TARBALLDIR)/$(SRCPKG)_$(ORIG_VERSION).orig.tar.gz:
- @ echo "\`$(TARBALLDIR)/$(SRCPKG)-$(ORIG_VERSION).tar.gz'" not \
- found and not generated by debian/rules. Provided you have the \
- necessary packages installed, you can generate it yourself via \
- "\"./bootstrap.sh && ./configure && make dist\"".
- exit 1
-
-endif # wildcard frr-$(ORIG_VERSION).tar.gz
-endif # TARBALLDIR nonempty