that interface.
+.. _bfd-static-peer-config:
+
+BFD Static Route Monitoring Configuration
+-----------------------------------------
+
+A monitored static route conditions the installation to the RIB on the
+BFD session running state: when BFD session is up the route is installed
+to RIB, but when the BFD session is down it is removed from the RIB.
+
+The following commands are available inside the configuration node:
+
+.. clicmd:: ip route A.B.C.D/M A.B.C.D bfd [{multi-hop|source A.B.C.D|profile BFDPROF}]
+
+ Configure a static route for ``A.B.C.D/M`` using gateway ``A.B.C.D`` and use
+ the gateway address as BFD peer destination address.
+
+.. clicmd:: ipv6 route X:X::X:X/M [from X:X::X:X/M] X:X::X:X bfd [{multi-hop|source X:X::X:X|profile BFDPROF}]
+
+ Configure a static route for ``X:X::X:X/M`` using gateway
+ ``X:X::X:X`` and use the gateway address as BFD peer destination
+ address.
+
+The static routes when uninstalled will no longer show up in the output of
+the command ``show ip route`` or ``show ipv6 route``, instead we must use the
+BFD static route show command to see these monitored route status.
+
+.. clicmd:: show bfd static route [json]
+
+ Show all monitored static routes and their status.
+
+ Example output:
+
+ ::
+
+ Showing BFD monitored static routes:
+
+ Route groups:
+ rtg1 peer 172.16.0.1 (status: uninstalled):
+ 2001:db8::100/128
+
+ Next hops:
+ VRF default IPv4 Unicast:
+ 192.168.100.0/24 peer 172.16.0.1 (status: uninstalled)
+
+ VRF default IPv4 Multicast:
+
+ VRF default IPv6 Unicast:
+
.. _bfd-configuration:
Configuration