Donald Sharp [Mon, 17 Sep 2018 17:58:59 +0000 (13:58 -0400)]
pimd: Actually create vif's in non-integrated config
The startup of a non-integrated config was not properly
allowing for startup to create the vif when we have
not learned about the interface we are trying to configure
at this point in time. Actually notice when we are
trying to create a pimreg device or not to properly
notice when to attempt to create the vif or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Mon, 17 Sep 2018 13:18:40 +0000 (09:18 -0400)]
zebra: Send correct default vrf tableid for MROUTE stats
So the linux kernel uses the RT_TABLE_MAIN for the table
id used for ip routing. The multicast routing tables use
RT_TABLE_DEFAULT. We changed the internal code of zebra_vrf
a few months back to use RT_TABLE_MAIN as the tableid to
use. This caused the pim sg stats to stop working because
of the kernel bug where it uses a different table
for ip routing and ip multicast.
Put a bit of a special case in to do the right thing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Fri, 14 Sep 2018 21:54:11 +0000 (17:54 -0400)]
zebra: Newer kernels send data about mroute changes
Newer linux kernels apparently send data down the netlink
bus for the creation of mroutes. Add a bit of code
to notice this and to handle it appropriately( ie do
nothing at this point in time ) as that the correct
place to do this is in the pim socket in pimd.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Fri, 14 Sep 2018 20:30:17 +0000 (16:30 -0400)]
staticd: Allow table_id to be a distinguisher for installation
The table_id should be a discriminator in the installation of
static routes into zebra from staticd. Add this to allow the end
user to do something like this:
ip route 4.5.6.7/32 192.168.209.44
ip route 4.5.6.7/32 192.168.209.44 table 3000
ip route 4.5.6.7/32 192.168.209.45 table 3000
robot# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route
K>* 0.0.0.0/0 [0/101] via 192.168.201.1, enp0s3, 00:01:40
S>* 4.3.2.1/32 [1/0] via 192.168.210.4, enp0s10, 00:01:35
S>* 4.3.2.2/32 [1/0] via 192.168.209.4, enp0s9, 00:01:35
S>* 4.5.6.0/26 [1/0] via 192.168.210.4, enp0s10, 00:01:35
S>* 4.5.6.7/32 [1/0] via 192.168.209.44, enp0s9, 00:01:35
C>* 192.168.201.0/24 is directly connected, enp0s3, 00:01:40
C>* 192.168.208.0/24 is directly connected, enp0s8, 00:01:40
C>* 192.168.209.0/24 is directly connected, enp0s9, 00:01:40
C>* 192.168.210.0/24 is directly connected, enp0s10, 00:01:40
robot# show ip route table 3000
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route
S>* 4.5.6.7/32 [1/0] via 192.168.209.44, enp0s9, 00:00:55
* via 192.168.209.45, enp0s9, 00:00:55
robot#
Fixes: #2954 Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
F. Aragon [Fri, 14 Sep 2018 12:53:55 +0000 (14:53 +0200)]
bgpd: type fix
For tracking the last state of the penalty (struct bgp_damp_info) a 'double'
type was used instead of using the 'unsigned int' being used in the structure.
Detected using ./configure CFLAGS=-Wfloat-equal CC=clang
Donald Sharp [Thu, 6 Sep 2018 14:51:08 +0000 (10:51 -0400)]
bgpd: Prevent possible crash when parsing v6 attributes
The peer->nexthop.ifp pointer must be set when parsing the
attributes in bgp_mp_reach_parse, notice this
and fail gracefully.
Rework bgp_nexthop_set to remove the HAVE_CUMULUS and to
fail the nexthop_set when we have a zebra connection and
no ifp pointer, as that not havinga zebra connection and
no ifp pointer is legal.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
pimd: create a new command "ip pim" configuring pim sm
A new command "ip pim" is created to configure pim sm on an
interface, which replaces the existing commands "ip pim sm"
and "ip pim ssm" and make "ip pim sm" and "ip pim ssm" as
hidden commands. The command "ip multicast-routing" is removed
since it is already enabled on FRR by default.
Donald Sharp [Mon, 10 Sep 2018 14:19:03 +0000 (10:19 -0400)]
bgpd: Honor origin change in bgp aggregates
When the origin changed we must honor and update the aggregate
to the peer. This code adds a bit of code to the bgp_aggregate_info_same
code to see if the origin has changed and to indicate that it has.
Fixes: #2993 Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
David Lamparter [Sat, 18 Aug 2018 16:03:16 +0000 (18:03 +0200)]
vtysh: make RPKI node non-conditional
Whether or not RPKI is enabled during build shouldn't really influence
vtysh; the user can always manually install bgpd_rpki.so later and it
should work. This also means that the behaviour of "RPKI module not
loaded" is consistent regardless of whether it was a compile-time or
runtime decision.
Signed-off-by: David Lamparter <equinox@diac24.net>
David Lamparter [Sun, 2 Sep 2018 18:36:20 +0000 (20:36 +0200)]
build: fix & clean up *SAN flags
ASAN/MSAN/TSAN flags need to be in CFLAGS and LDFLAGS; the latter links
the correct compiler-dependent library. Also, the configure switch was
broken (--disable-... would enable the sanitizer.)
Signed-off-by: David Lamparter <equinox@diac24.net>
David Lamparter [Sat, 8 Sep 2018 18:18:30 +0000 (20:18 +0200)]
bfdd: fix garbage "port" string
bfd_recv_ipv4() is getting an uninitialized buffer passed in as port,
and then checks it without clearing it first. Thus we can end up
leaving garbage data in it.
Signed-off-by: David Lamparter <equinox@diac24.net>
projects / mirror_frr.git / log