-ifupdown2 (1.1-cl3u10) UNRELEASED; urgency=medium
+ifupdown2 (3.2.0) unstable; urgency=medium
+
+ * Fix: Sonarqube issues
+ * Fix: ifquery hangs indefinitely on ^C
+ * Fix: Skipping admin down on deleted vlans
+ * Fix: Merge existing MTU into new netlink object
+ * Fix: scheduler: env variable not properly set for user commands (fixes #218)
+ * Fix: ifquery-check: vlan-protocol for dotted interfaces
+ * Fix: Down ops on vrf-slave should set the slave admin down
+ * New: Allow bond creation without slaves
+ * New: Add `--set-ring` option to ethtool
+ * New: Openvswitch : add support for fakebridge
+ * New: add support for systemd logging (--systemd)
+ * New: Process hwaddress before processing ip addresses
+ * New: Set protodown off on bond slave before bond is deleted
+ * New: Make sure bond speed and slaves (swps) speed are matching
+
+ -- Julien Fortin <jfortin@nvidia.com> Thu, 04 May 2023 23:42:00 -0700
+
+ifupdown2 (3.1.0-1) unstable; urgency=medium
+
+ * New: ifquery-check now validates admin state
+ * New: bond: bond mac should always be inherited from it's first slave
+
+ * New: macvlan/addressvirtual features:
+ - check interface name lenght and warn if len > 15
+ - sync macvlan forwarding state with lower-device
+
+ * New: vxlan features:
+ - Single vxlan device support (bridge-vlan-vni-map)
+ New attributes:
+ - vxlan-mcastgrp-map (vxlan multicast group for single-vxlan device)
+ - vxlan-vnifilter (vxlan vni filter for single-vxlan device)
+ - vxlan-remoteip-map (static HREP entries for static single vxlan dev)
+ - vxlan-tos (ToS value)
+ - vxlan-udp-csum (whether to perform checksumming or not)
+ New policy:
+ - vxlan-support-mix-dev-types: allow mix of traditional and single
+ vxlan device (default to yes)
+
+ * New: bridge features:
+ - add multi bridge support for bridge_set_static_mac_from_port=yes
+ - check if bridge mac is already inherited from a port
+ - detect VXLAN mis-config VNI "bridge-learning=on" and warn
+ - detect and warn when arp suppression is enabled but no vlan config
+ - bridge-arp-nd-suppress with ifquery --with-default if policy is set
+ - enable ipv6 on SVD brport
+ - enable forwarding on dhcp bridges (fixes: #179)
+ New attribute:
+ - bridge-vlan-vni-map (single vxlan device support)
+ New policy:
+ - bridge_always_up_dummy_brport
+
+ * New: address features:
+ - warn user if L3-SVI is configured with "ip-forward off"
+ - enable ipv6 before adding new address
+ New policies:
+ - check_l3_svi_ip_forwarding (check ip forward on l3 svi, default off)
+ - ip_blacklist: blacklist specific ip addresses
+
+ * New: vlan features:
+ - check vlan-id misconfiguration and print warning
+ New attribute:
+ - vlan-bridge-binding (if enabled link state is no longer automatically
+ transferred from the lower device)
+
+ * Fix: address: remove stale fdb entry for svi (when hwaddress is used)
+ * Fix: usercmds: Set environment just like the original ifupdown
+ * Fix: update mako template warning (python3-mako)
+ * Fix: batman_adv: fix unresolved reference
+
+ -- Julien Fortin <jfortin@nvidia.com> Mon, 05 Jul 2021 23:42:42 +0200
+
+ifupdown2 (3.0.0-1) unstable; urgency=medium
+
+ * New: python3 support
+ * New: attribute alias support
+ * New: bridge-always-up attribute
+ * New: set bridge mtu with policy default
+ * New: ES bond with "es-sys-mac" attribute
+ * New: vxlan attribute: vxlan-mcastgrp-map
+ * New: support for "veth-peer-name" attribute
+ * New: dhcp policy: dhclient_retry_on_failure
+ * New: support for marking interfaces as mgmt interfaces
+ * New: bridge-vlan-vni-map attribute (single vxlan device)
+ * New: dhcp: skipping dhcp configuration if link-down yes
+ * New: vrf-slave: keep vlan down if lower device has "link-down yes"
+ * New: vxlan: support for vxlan-svcnodeip6 and vxlan-mcastgrp6 (fixes #43)
+ * New: support for add ovs-ports-condone-regex attribute (openvswitch)
+ * Fix: dry-run exceptions
+ * Fix: bond enslavement ordering
+ * Fix: process MTU before addrgen
+ * Fix: set bridge MTU after bridge creation
+ * Fix: ifquery-running: incorrect displayed data
+ * Fix: tunnel configuration compatibility with ifupdown1
+ * Fix: start-networking script is back to handle mgmt & hotplug cases
+ * Fix: devices matching with ".{0,13}\-v" could get removed by ifreload
+ * Fix: mstpctl: check mstpctl-stp and bridge-stp and fix bridge cache update
+ * Removing python-argcomplete dependency
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 04 Aug 2020 23:42:42 +0200
+
+ifupdown2 (2.0.2-1) unstable; urgency=medium
+
+ * New: addons: ethtool: add support for "ethtool_ignore_errors" policy
+ * New: addons: dhcp: if mgmt vrf context exec dhclient in default vrf
+ * Fix: nlpacket: don't raise an exception on 24 bytes mac address (#140)
+ * Fix: IFLA_INFO_KIND: decode tunnel data
+ * Fix: XFRM for 2.x release
+ * Fix: addons.conf: remove duplicate entry for tunnel pre-up
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Wed, 04 Mar 2020 23:42:42 +0100
+
+ifupdown2 (2.0.1-1) unstable; urgency=medium
+
+ * New argv option: --nldebug to print netlink debug message
+ * New: ethtool: nics (GRO, LRO GSO, TSO, UFO, TX and RX) offload attributes
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 31 Dec 2019 15:21:06 +0100
+
+ifupdown2 (2.0.0-1) unstable; urgency=medium
+
+ * Introduction of the live netlink cache
+ * Refactoring and PEP8 fixes
+ * Install systemd ifupdown2.netowrking.service and ifup.service
+ * Addons: bond: bond-primary attributes (closes: #9)
+ * Addons: address-virtual: vrrp support
+ * Addons: address: add arp-accept option
+ * Addons: tunnel: adding "tunnel-" prefix to every attributes
+ * Loopback interface won't go down (unless link-down yes)
+ * Macvlans (address-virtual) can now be configured without ips
+ * Add support for vxlan multicast group (vxlan-mcastgrp)
+ * New sets of poliicies:
+ - bridge polcy for vxlan port: bridge-vxlan-arp-nd-suppres (ON/off)
+ - bridge policy for vxlan port: bridge_vxlan_port_learning (ON/off)
+ - bridge policy for vxlan port:
+ vxlan_bridge_igmp_snooping_enable_port_mcrouter (1/0)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 01 Oct 2019 23:42:42 +0200
+
+ifupdown2 (1.2.8-1) unstable; urgency=medium
+
+ * New: Add policy dhcp6-duid to specify DUID type to be used for IPv6 interfaces
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Thu, 11 Jul 2019 23:42:42 +0200
+
+ifupdown2 (1.2.7-1) unstable; urgency=medium
+
+ * New: Add bridge-ports-condone-regex option (closes #117)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jul 2019 23:42:42 +0200
+
+ifupdown2 (1.2.6-1) unstable; urgency=medium
+
+ * Fix: AttributeError exception in bridge module (fixes #90)
+ * Fix: ifupdownaddons: LinkUtils fix cmd concatenation (closes: #930839)
+ * New. policymanager: merge module policy instead of overriding duplicates
+ * New: set default mtu on user defined device (via link-type)
+ * New: add support for vxlan-ttl attribute
+ * New: add support for vrrp attribute
+ * New: introduce new bridge policy:
+ "vxlan_bridge_igmp_snooping_enable_port_mcrouter"
+ * New: link-down yes will also down macvlans
+ * New: XFRM addon module
+ * New: Add policy to wait for IPv6 link local address to be available
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Sun, 23 Jun 2019 23:42:42 -1000
+
+ifupdown2 (1.2.5-1) unstable; urgency=medium
+
+ * Fix: ifupdown2 scripts: log warning on EACCES exception (Fixes #89)
+ * Fix: debian: install sysvinit script (closes: #918775)
+ * Fix: debian: postinst: remove diversion after upgrade from stretch
+ (closes: #919443)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 21 Jan 2019 23:42:42 +8000
+
+ifupdown2 (1.2.4-1) unstable; urgency=medium
+
+ * Fix: statemanager directory path customization via ifupdown2.conf
+ (closes: #918832)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Fri, 11 Jan 2019 23:42:42 +0000
+
+ifupdown2 (1.2.3-1) unstable; urgency=medium
+
+ * Fix: log: use stderr if syslog initialization fails (closes: #917534)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Sun, 30 Dec 2018 23:42:42 +0700
+
+ifupdown2 (1.2.2-1) unstable; urgency=medium
+
+ * New: add support for B.A.T.M.A.N. adv. attributes
+ * New: support for new iproute2 format (bridge vlan show)
+ * New: add new checks for existing device with vxlan attributes
+ * Fix: pypi install: local addons modules should be loaded first
+ * Fix: link-down yes on vrf slaves
+ * Fix: nlmanager: use strerror to format kernel error
+ * Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
+ * Fix: man: remove non-implemented -m option (closes: #905572)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Thu, 20 Dec 2018 23:42:42 +0000
+
+ifupdown2 (1.2.1) UNRELEASED; urgency=medium
+
+ * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
+ * Fix: Link down does not work on any intf configured in a VRF
+ * Add: ethtool: add link-speed 10 to valid values array
+ * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
+ * Add: warning when bridge attribute are used on non br[port] intf
+ * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
+ * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
+ * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
+ * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
+ * addressvirtual module_globals "addressvirtual_with_route_metric" policy
+ * Closes: ethtool: link-fec: local variable 'fec_attrs'
+ referencede before assignment
+ * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
+ an interface
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Wed, 24 Oct 2018 23:42:42 +0200
+
+ifupdown2 (1.2.0) UNRELEASED; urgency=medium
+
+ * Package architecture refactoring and cleanups
+ * Package can be build/install as debian, pip or rpm package
+ * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
+ * VRF slaves: add support for link-down yes
+ * addressvirtual: macvlan: add default metric to ip4 and ip6
+ * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
+ * Closes #58: address addon "vlan_aware_bridge_address_support" policy
+ * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
+ * Configuration for IPv6 link-local auto-generate mode, new attributes:
+ ipv6-addrgen (address addon)
+ address-virtual-ipv6-addrgen (addressvirtual addon)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 25 Jun 2018 23:42:42 +0200
+
+ifupdown2 (1.1.18) UNRELEASED; urgency=medium
+
+ * Fix: Link down does not work on SVI configured in a VRF
+ * Fix: ifreload causes MTU to drop on bridge SVIs
+ * Fix: addons: addressvirtual: check if SVI name is first in routing table
+ * Fix: ifreload error on deleting bond slaves from an already configured bond
+ * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
+ * Fix: ifupdown2 syntax check needed for vxlan interfaces
+ * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
+ * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
+ * Fix: using reserved VLAN range reports error but ifreload returns 0
+ * Fix: unable to set bridge-portmcrouter to "2"
+ * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
+ * Fix: traditional bridge svi breaks when extra bridge added
+ * Fix: github #39: addons: vrf: fix vrf slave link kind
+ * New. Enabled: addons: vxlan: add support for vxlan-port attribute
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Thu, 12 Apr 2018 11:10:04 +0200
+
+ifupdown2 (1.1.17) UNRELEASED; urgency=medium
+
+ * Fix: ip[6]-forward attributes not set at boot
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Thu, 08 Feb 2018 09:48:37 +0100
+
+ifupdown2 (1.1.16) UNRELEASED; urgency=medium
+
+ * Fix: python exception on macvlans address dump
+ * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jan 2018 02:02:58 +0100
+
+ifupdown2 (1.1.15) UNRELEASED; urgency=medium
+
+ * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
+ * New. Enabled: bridge attributes, when removed reset to default
+ * New. Enabled: vxlan attributes, when removed reset to default
+ * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
+ * Fix: policy "iface_defaults" not supported for MTU
+ * Fix: address module: handling of ipv4 & ipv6 (add/remove)
+ * Fix: warning for vlan reserved range
+ * Fix: MTU handling on bridge SVIs
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Wed, 22 Nov 2017 19:07:43 +0100
+
+ifupdown2 (1.1.14) UNRELEASED; urgency=medium
+
+ * New. Enabled: default policy for bridge MAC address
+ * Fix: ethtool: don't set link speed and duplex if autoneg is on
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Wed, 25 Oct 2017 23:12:27 +0200
+
+ifupdown2 (1.1.13) UNRELEASED; urgency=medium
+
+ * Fix: VRF: ssh session not killed on ifreload
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Fri, 15 Sep 2017 22:43:12 +0200
+
+ifupdown2 (1.1.12) UNRELEASED; urgency=medium
+
+ * New. Enabled: mpls-enable attribute
+ * New. Enabled: bond and bridge module moved to netlink configuration
+ * New. Enabled: handle a mix of auto and specified vrf table ids
+ * Fix: igmp attribute reset to defaults when removed from config
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 07 Aug 2017 22:14:03 +0200
+
+ifupdown2 (1.1.11) UNRELEASED; urgency=medium
+
+ * Fix: link-down attribute not applied on slave ports
+ * Fix: bug that prevented config of mtu below 1280
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Thu, 18 May 2017 12:45:21 -0700
+
+ifupdown2 (1.1.10) UNRELEASED; urgency=medium
* New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
* New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
- * Closes: CM-8424. bond: adding attribute bond-(up|down)delay
+ * New. Enabled: bond-lacp-rate support slow/fast argument
+ * New. Enabled: ifquery --syntax-help: add support for json output
+ * New. Enabled: vlan: add new attribute 'vlan-protocol'
+ * New. Enabled: address: add new attribute 'ip6-forward'
+ * New. Enabled: bridge: add new attribute 'bridge-mcstats'
+ * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
+ * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
+ * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
+ * Fix: bond: add attribute bond-(up|down)delay
+ * Fix: bridge-vids: --syntax-check accepts legacy syntax
- -- Julien Fortin <julien@cumulusnetworks.com> Thu, 23 Feb 2017 10:50:14 +0100
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 17 Apr 2017 06:18:04 +0200
-ifupdown2 (1.1-cl3u9) RELEASED; urgency=medium
+ifupdown2 (1.1.9) UNRELEASED; urgency=medium
* New. Enabled: support for bridge-learning attribute
- -- Cumulus Networks <dev-support@cumulusnetworks.com> Mon, 06 Feb 2017 13:22:51 -0800
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 06 Feb 2017 13:22:51 -0800
-ifupdown2 (1.1-cl3u8) RELEASED; urgency=medium
+ifupdown2 (1.1.8) UNRELEASED; urgency=medium
* New. Enabled: update link-speed values: add 25G and 50G
* New. Enabled: new 'link-down' [yes|no] attribute to keep link down
- -- dev-support <dev-support@cumulusnetworks.com> Tue, 17 Jan 2017 08:39:29 +0100
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 17 Jan 2017 08:39:29 +0100
-ifupdown2 (1.1-cl3u7) RELEASED; urgency=medium
+ifupdown2 (1.1.7) UNRELEASED; urgency=medium
* New. Enabled: fix for inet and inet6 dhcp on the same interface
* New. Enabled: syntax check to warn on common configuration mistakes
* New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
and no upperifaces
- * Closes: CM-13221: fixes for MTU handling
- * Closes: CM-13248: dhcpv6 fails if interface doesn't have link-local addr
+ * Fix: fixes for MTU handling
+ * Fix: dhcpv6 fails if interface doesn't have link-local addr
- -- dev-support <dev-support@cumulusnetworks.com> Wed, 07 Dec 2016 05:48:45 +0100
+ -- Julien Fortin <julien@cumulusnetworks.com> Wed, 07 Dec 2016 05:48:45 +0100
-ifupdown2 (1.1-cl3u6) RELEASED; urgency=medium
+ifupdown2 (1.1.6) UNRELEASED; urgency=medium
* Closes: github #14. add environment variables passed to user scripts
* New. Enabled: addons may provide a list of ifupdown scripts to ignore
- -- dev-support <dev-support@cumulusnetworks.com> Mon, 19 Sep 2016 16:37:36 -0700
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 19 Sep 2016 16:37:36 -0700
-ifupdown2 (1.1-cl3u5) RELEASED; urgency=medium
+ifupdown2 (1.1.5) UNRELEASED; urgency=medium
- * Closes: CM-12798. fix handling of EXISTS errors on address add
- * Closes: CM-11214. fix handling of mtu on addressvirtual macvlan devices
- * Closes: CM-12884. fix mako namespace handling
+ * Fix: handling of EXISTS errors on address add
+ * Fix: handling of mtu on addressvirtual macvlan devices
+ * Fix: mako namespace handling
- -- dev-support <dev-support@cumulusnetworks.com> Fri, 16 Sep 2016 12:48:04 -0700
+ -- Julien Fortin <julien@cumulusnetworks.com> Fri, 16 Sep 2016 12:48:04 -0700
-ifupdown2 (1.1-cl3u4) RELEASED; urgency=medium
+ifupdown2 (1.1.4) UNRELEASED; urgency=medium
* Performance improvements
* New. Enabled: sbin: start-networking: support hotplug class from init script
* New. Enabled: extend ifquery support for mstpctl addons
* New. Enabled: each addon may perform semantic and syntax checks by
implementing a custom method
- * Closes: CM-11745. Support for address-virtual lines under a vrf slave
- * Closes: CM-11718. Defaults for link attributes were not applied
- * Closes: CM-11511. Disable IPv6 duplicate address detection on VRR interfaces
- * Closes: CM-11485. Fix ifquery to extract vlan-id from iface if not preset
- * Closes: CM-8623. Fix for ifquery -c bridge pvid error on a valid config
+ * Fix: Support for address-virtual lines under a vrf slave
+ * Fix: Defaults for link attributes were not applied
+ * Fix: Disable IPv6 duplicate address detection on VRR interfaces
+ * Fix: ifquery to extract vlan-id from iface if not preset
+ * Fix: ifquery -c bridge pvid error on a valid config
- -- dev-support <dev-support@cumulusnetworks.com> Fri, 29 Jul 2016 08:55:50 -0700
+ -- Julien Fortin <julien@cumulusnetworks.com> Fri, 29 Jul 2016 08:55:50 -0700
-ifupdown2 (1.1-cl3u3) RELEASED; urgency=medium
+ifupdown2 (1.1.3) UNRELEASED; urgency=medium
- * Closes: CM-11214. Interface configuration parsing error when keyword vlan
+ * Fix: Interface configuration parsing error when keyword vlan
is the interface name.
- -- dev-support <dev-support@cumulusnetworks.com> Sun, 05 Jun 2016 08:55:50 -0700
+ -- Julien Fortin <julien@cumulusnetworks.com> Sun, 05 Jun 2016 08:55:50 -0700
-ifupdown2 (1.1-cl3u2) RELEASED; urgency=medium
+ifupdown2 (1.1.2) UNRELEASED; urgency=medium
- * Closes: CM-10478. checks for invalid address-virtual attributes
+ * Fix: checks for invalid address-virtual attributes
* New. Deprecated: `mstpctl-stp` attribute
* New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
* New. Enabled: addon module for configuring vrf
* New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
* New. Enabled: vrf awareness in dhcp addon module
- -- dev-support <dev-support@cumulusnetworks.com> Tue, 3 May 2016 14:42:42 -0700
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 3 May 2016 14:42:42 -0700
-ifupdown2 (1.1-cl3u1) unstable; urgency=low
+ifupdown2 (1.1) unstable; urgency=low
* Initial release.
- -- dev-support <dev-support@cumulusnetworks.com> Thu, 20 Aug 2015 06:14:24 -0700
+ -- Roopa Prabhu <roopa@cumulusnetworks.com> Thu, 20 Aug 2015 06:14:24 -0700
projects / mirror_ifupdown2.git / blobdiff