Hangbin Liu [Thu, 26 Oct 2017 01:41:47 +0000 (09:41 +0800)]
lib/libnetlink: update rtnl_talk to support malloc buff at run time
This is an update for 460c03f3f3cc ("iplink: double the buffer size also in
iplink_get()"). After update, we will not need to double the buffer size
every time when VFs number increased.
With call like rtnl_talk(&rth, &req.n, NULL, 0), we can simply remove the
length parameter.
With call like rtnl_talk(&rth, nlh, nlh, sizeof(req), I add a new variable
answer to avoid overwrite data in nlh, because it may has more info after
nlh. also this will avoid nlh buffer not enough issue.
We need to free answer after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Phil Sutter <phil@nwl.cc>
Hangbin Liu [Thu, 26 Oct 2017 01:41:46 +0000 (09:41 +0800)]
lib/libnetlink: re malloc buff if size is not enough
With commit 72b365e8e0fd ("libnetlink: Double the dump buffer size")
we doubled the buffer size to support more VFs. But the VFs number is
increasing all the time. Some customers even use more than 200 VFs now.
We could not double it everytime when the buffer is not enough. Let's just
not hard code the buffer size and malloc the correct number when running.
Introduce function rtnl_recvmsg() to always return a newly allocated buffer.
The caller need to free it after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Phil Sutter <phil@nwl.cc>
... if we exceed rate of 1kbps (burst of 90K), do an absolute jump of 2 actions
sudo $TC actions add action police rate 1kbit burst 90k conform-exceed jump 2 / pipe
... lets add a couple of marks so we can use them to mark exceed/not exceed
sudo $TC actions add action skbedit mark 11 ok index 11
sudo $TC actions add action skbedit mark 12 ok index 12
... if we dont exceed our rate we get a mark of 11, else mark of 12
sudo $TC filter add dev $ETH parent ffff: protocol ip prio 8 u32 \
match ip dst 127.0.0.8/32 flowid 1:10 \
action police index 4 \
action skbedit index 11 \
action skbedit index 12
Ok, lets keep this thing a little busy..
sudo ping -f -c 10000 127.0.0.8
... now lets see the filters..
sudo $TC -s filter ls dev $ETH parent ffff: protocol ip
filter pref 8 u32 chain 0
filter pref 8 u32 chain 0 fh 800: ht divisor 1
filter pref 8 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 not_in_hw (rule hit 20000 success 10000)
match 7f000008/ffffffff at 16 (success 10000 )
action order 1: police 0x4 rate 1Kbit burst 23440b mtu 2Kb action jump 2/pipe overhead 0b
ref 2 bind 1 installed 198 sec used 2 sec
Action statistics:
Sent 840000 bytes 10000 pkt (dropped 0, overlimits 9721 requeues 0)
backlog 0b 0p requeues 0
action order 2: skbedit mark 11 pass
index 11 ref 2 bind 1 installed 127 sec used 2 sec
Action statistics:
Sent 23436 bytes 279 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
action order 3: skbedit mark 12 pass
index 12 ref 2 bind 1 installed 127 sec used 2 sec
Action statistics:
Sent 816564 bytes 9721 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
As can be seen 97.21% of the packets were marked as exceeding the allocated
rate; you could do something clever with the skb mark after this.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Michal Kubecek [Thu, 19 Oct 2017 08:21:08 +0000 (10:21 +0200)]
ip maddr: fix filtering by device
Commit 530903dd9003 ("ip: fix igmp parsing when iface is long") uses
variable len to keep trailing colon from interface name comparison. This
variable is local to loop body but we set it in one pass and use it in
following one(s) so that we are actually using (pseudo)random length for
comparison. This became apparent since commit b48a1161f5f9 ("ipmaddr: Avoid
accessing uninitialized data") always initializes len to zero so that the
name comparison is always true. As a result, "ip maddr show dev eth0" shows
IPv4 multicast addresses for all interfaces.
Instead of keeping the length, let's simply replace the trailing colon with
a null byte. The bonus is that we get correct interface name in ma.name.
Fixes: 530903dd9003 ("ip: fix igmp parsing when iface is long") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Phil Sutter <phil@nwl.cc> Acked-by: Petr Vorel <pvorel@suse.cz>
Phil Sutter [Wed, 18 Oct 2017 17:58:13 +0000 (19:58 +0200)]
ss: Distinguish between IPv4 and IPv6 wildcard sockets
Commit aba9c23a6e1cb ("ss: enclose IPv6 address in brackets") unified
display of wildcard sockets in IPv4 and IPv6 to print the unspecified
address as '*'. Users then complained that they can't distinguish
between address families anymore, so change this again to what Stephen
Hemminger suggested:
| *:80 << both IPV6 and IPV4
| [::]:80 << IPV6_ONLY
| 0.0.0.0:80 << IPV4_ONLY
Note that on older kernels which don't support INET_DIAG_SKV6ONLY
attribute, pure IPv6 sockets will still show as '*'.
Cc: Humberto Alves <hjalves@live.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Phil Sutter <phil@nwl.cc>
ip: bridge_slave: add support for per-port group_fwd_mask
This patch adds the iproute2 support for getting and setting the
per-port group_fwd_mask. It also tries to resolve the value into a more
human friendly format by printing the known protocols instead of only
the raw value.
The man page is also updated with the new option.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Petr Vorel [Fri, 13 Oct 2017 13:57:17 +0000 (15:57 +0200)]
color: Fix another ip segfault when using --color switch
Commit 959f1428 ("color: add new COLOR_NONE and disable_color function")
introducing color enum COLOR_NONE, which is not only duplicite of
COLOR_CLEAR, but also caused segfault, when running ip with --color
switch, as 'attr + 8' in color_fprintf() access array item out of
bounds. Thus removing it and restoring "magic" offset + 7.
Petr Vorel [Fri, 13 Oct 2017 13:57:16 +0000 (15:57 +0200)]
color: Fix ip segfault when using --color switch
Commit d0e72011 ("ip: ipaddress.c: add support for json output")
introduced passing -1 as enum color_attr. This is not only wrong as no
color_attr has value -1, but also causes another segfault in color_fprintf()
on this setup as there is no item with index -1 in array of enum attr_colors[].
Using COLOR_CLEAR is valid option.
Reproduce with:
$ COLORFGBG='0;15' ip -c a
NOTE: COLORFGBG is environmental variable used for defining whether user
has light or dark background.
COLORFGBG="0;15" is used to ask for color set suitable for light background,
COLORFGBG="15;0" is used to ask for color set suitable for dark background.
Ivan Delalande [Fri, 6 Oct 2017 23:48:20 +0000 (16:48 -0700)]
ss: print MD5 signature keys configured on TCP sockets
These keys are reported by kernel 4.14 and later under the
INET_DIAG_MD5SIG attribute, when INET_DIAG_INFO is requested (ss -i)
and we have CAP_NET_ADMIN. The additional output looks like:
Ivan Delalande [Fri, 6 Oct 2017 23:48:19 +0000 (16:48 -0700)]
utils: add print_escape_buf to format and print arbitrary bytes
Keep it as simple as possible for now: just escape anything that is not
isprint-able, is among the "escape" parameter or '\' as an octal escape
sequence. This should be pretty easy to extend if any other user needs
something more complex in the future.
Baruch Siach [Mon, 9 Oct 2017 05:49:44 +0000 (08:49 +0300)]
lib: fix multiple strlcpy definition
Some C libraries, like uClibc and musl, provide BSD compatible
strlcpy(). Add check_strlcpy() to configure, and avoid defining strlcpy
and strlcat when the C library provides them.
This fixes the following static link error with uClibc-ng:
.../sysroot/usr/lib/libc.a(strlcpy.os): In function `strlcpy':
strlcpy.c:(.text+0x0): multiple definition of `strlcpy'
../lib/libutil.a(utils.o):utils.c:(.text+0x1ddc): first defined here
collect2: error: ld returned 1 exit status
Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Roopa Prabhu [Tue, 10 Oct 2017 04:42:13 +0000 (21:42 -0700)]
iplink: new option to set neigh suppression on a bridge port
neigh suppression can be used to suppress arp and nd flood
to bridge ports. It maps to the recently added
kernel support for bridge port flag IFLA_BRPORT_NEIGH_SUPPRESS.
Yotam Gigi [Sun, 8 Oct 2017 14:43:04 +0000 (17:43 +0300)]
ip: mroute: Print offload indication
Since kernel net-next commit c7c0bbeae950 ("net: ipmr: Add MFC offload
indication") the kernel indicates on an MFC entry whether it was offloaded
using the RTNH_F_OFFLOAD flag. Update the "ip mroute show" command to
indicate when a route is offloaded, similarly to the "ip route show"
command.
Stefan Hajnoczi [Fri, 6 Oct 2017 15:48:41 +0000 (11:48 -0400)]
ss: add AF_VSOCK support
The AF_VSOCK address family is a host<->guest communications channel
supported by VMware, KVM, and Hyper-V. Initial VMware support was
released in Linux 3.9 in 2013 and transports for other hypervisors were
added later.
AF_VSOCK addresses are <u32 cid, u32 port> tuples. The 32-bit cid
integer is comparable to an IP address. AF_VSOCK ports work like
TCP/UDP ports.
Both SOCK_STREAM and SOCK_DGRAM socket types are available.
This patch adds AF_VSOCK support to ss(8) so that sockets can be
observed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Fri, 6 Oct 2017 15:48:39 +0000 (11:48 -0400)]
ss: allow AF_FAMILY constants >32
Linux has more than 32 address families defined in <bits/socket.h>. Use
a 64-bit type so all of them can be represented in the filter->families
bitmask.
It's easy to introduce bugs when using (1 << AF_FAMILY) because the
value is 32-bit. This can produce incorrect results from bitmask
operations so introduce the FAMILY_MASK() macro to eliminate these bugs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lorenzo Colitti [Mon, 2 Oct 2017 17:03:37 +0000 (02:03 +0900)]
iproute: build more easily on Android
iproute2 contains a bunch of kernel headers, including uapi ones.
Android's libc uses uapi headers almost directly, and uses a
script to fix kernel types that don't match what userspace
expects.
For example: https://issuetracker.google.com/36987220 reports
that our struct ip_mreq_source contains "__be32 imr_multiaddr"
rather than "struct in_addr imr_multiaddr". The script addresses
this by replacing the uapi struct definition with a #include
<bits/ip_mreq.h> which contains the traditional userspace
definition.
Unfortunately, when we compile iproute2, this definition
conflicts with the one in iproute2's linux/in.h.
Historically we've just solved this problem by running "git rm"
on all the iproute2 include/linux headers that break Android's
libc. However, deleting the files in this way makes it harder to
keep up with upstream, because every upstream change to
an include file causes a merge conflict with the delete.
This patch fixes the problem by moving the iproute2 linux headers
from include/linux to include/uapi/linux.
Tested: compiles on ubuntu trusty (glibc)
Signed-off-by: Elliott Hughes <enh@google.com> Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Phil Sutter [Mon, 2 Oct 2017 11:46:37 +0000 (13:46 +0200)]
Check user supplied interface name lengths
The original problem was that something like:
| strncpy(ifr.ifr_name, *argv, IFNAMSIZ);
might leave ifr.ifr_name unterminated if length of *argv exceeds
IFNAMSIZ. In order to fix this, I thought about replacing all those
cases with (equivalent) calls to snprintf() or even introducing
strlcpy(). But as Ulrich Drepper correctly pointed out when rejecting
the latter from being added to glibc, truncating a string without
notifying the user is not to be considered good practice. So let's
excercise what he suggested and reject empty, overlong or otherwise
invalid interface names right from the start - this way calls to
strncpy() like shown above become safe and the user has a chance to
reconsider what he was trying to do.
Note that this doesn't add calls to check_ifname() to all places where
user supplied interface name is parsed. In many cases, the interface
must exist already and is therefore looked up using ll_name_to_index(),
so if_nametoindex() will perform the necessary checks already.
Phil Sutter [Mon, 2 Oct 2017 11:46:35 +0000 (13:46 +0200)]
ip{6, }tunnel: Avoid copying user-supplied interface name around
In both files' parse_args() functions as well as in iptunnel's do_prl()
and do_6rd() functions, a user-supplied 'dev' parameter is uselessly
copied into a temporary buffer before passing it to ll_name_to_index()
or copying into a struct ifreq. Avoid this by just caching the argv
pointer value until the later lookup/strcpy.
Michal Kubecek [Fri, 29 Sep 2017 11:41:05 +0000 (13:41 +0200)]
ip xfrm: use correct key length for netlink message
When SA is added manually using "ip xfrm state add", xfrm_state_modify()
uses alg_key_len field of struct xfrm_algo for the length of key passed to
kernel in the netlink message. However alg_key_len is bit length of the key
while we need byte length here. This is usually harmless as kernel ignores
the excess data but when the bit length of the key exceeds 512
(XFRM_ALGO_KEY_BUF_SIZE), it can result in buffer overflow.
We can simply divide by 8 here as the only place setting alg_key_len is in
xfrm_algo_parse() where it is always set to a multiple of 8 (and there are
already multiple places using "algo->alg_key_len / 8").
lib: json_print: rework 'new_json_obj' drop FILE* argument
As Stephen Hemminger mentioned on the last submission the new_json_obj
function is always called with fp == stdout, so right now, there's no
need of this extra argument.
The background for the rework is the following:
The ip monitor didn't call `new_json_obj` (even for in non json context),
so the static FILE* _fp variable wasn't initialized, thus raising a
SIGSEGV in ipaddress.c. This patch should fix this issue for good, new
paths won't have to call `new_json_obj`.
How to reproduce:
$ ip -t mon label link
(gdb) bt
.#0 _IO_vfprintf_internal (s=s@entry=0x0, format=format@entry=0x45460d “%d: “, ap=ap@entry=0x7fffffff7f18) at vfprintf.c:1278
.#1 0x0000000000451310 in color_fprintf (fp=0x0, attr=<optimized out>, fmt=0x45460d “%d: “) at color.c:108
.#2 0x000000000044a856 in print_color_int (t=t@entry=PRINT_ANY, color=color@entry=4294967295, key=key@entry=0x4545fc “ifindex”,
fmt=fmt@entry=0x45460d “%d: “, value=<optimized out>) at ip_print.c:132
.#3 0x000000000040ccd2 in print_int (value=<optimized out>, fmt=0x45460d “%d: “, key=0x4545fc “ifindex”, t=PRINT_ANY) at ip_common.h:189
.#4 print_linkinfo (who=<optimized out>, n=0x7fffffffa380, arg=0x7ffff77a82a0 <_IO_2_1_stdout_>) at ipaddress.c:1107
.#5 0x0000000000422e13 in accept_msg (who=0x7fffffff8320, ctrl=0x7fffffff8310, n=0x7fffffffa380, arg=0x7ffff77a82a0 <_IO_2_1_stdout_>) at ipmonitor.c:89
.#6 0x000000000044c58f in rtnl_listen (rtnl=0x672160 <rth>, handler=handler@entry=0x422c70 <accept_msg>, jarg=0x7ffff77a82a0 <_IO_2_1_stdout_>)
at libnetlink.c:761
.#7 0x00000000004233db in do_ipmonitor (argc=<optimized out>, argv=0x7fffffffe5a0) at ipmonitor.c:310
.#8 0x0000000000408f74 in do_cmd (argv0=0x7fffffffe7f5 “mon”, argc=3, argv=0x7fffffffe588) at ip.c:116
.#9 0x0000000000408a94 in main (argc=4, argv=0x7fffffffe580) at ip.c:311
Fixes: 6377572f ("ip: ip_print: add new API to print JSON or regular format output") Reported-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
lib: json_print: rework 'new_json_obj' drop FILE* argument
As Stephen Hemminger mentioned on the last submission the new_json_obj
function is always called with fp == stdout, so right now, there's no
need of this extra argument.
The background for the rework is the following:
The ip monitor didn't call `new_json_obj` (even for in non json context),
so the static FILE* _fp variable wasn't initialized, thus raising a
SIGSEGV in ipaddress.c. This patch should fix this issue for good, new
paths won't have to call `new_json_obj`.
How to reproduce:
$ ip -t mon label link
(gdb) bt
.#0 _IO_vfprintf_internal (s=s@entry=0x0, format=format@entry=0x45460d “%d: “, ap=ap@entry=0x7fffffff7f18) at vfprintf.c:1278
.#1 0x0000000000451310 in color_fprintf (fp=0x0, attr=<optimized out>, fmt=0x45460d “%d: “) at color.c:108
.#2 0x000000000044a856 in print_color_int (t=t@entry=PRINT_ANY, color=color@entry=4294967295, key=key@entry=0x4545fc “ifindex”,
fmt=fmt@entry=0x45460d “%d: “, value=<optimized out>) at ip_print.c:132
.#3 0x000000000040ccd2 in print_int (value=<optimized out>, fmt=0x45460d “%d: “, key=0x4545fc “ifindex”, t=PRINT_ANY) at ip_common.h:189
.#4 print_linkinfo (who=<optimized out>, n=0x7fffffffa380, arg=0x7ffff77a82a0 <_IO_2_1_stdout_>) at ipaddress.c:1107
.#5 0x0000000000422e13 in accept_msg (who=0x7fffffff8320, ctrl=0x7fffffff8310, n=0x7fffffffa380, arg=0x7ffff77a82a0 <_IO_2_1_stdout_>) at ipmonitor.c:89
.#6 0x000000000044c58f in rtnl_listen (rtnl=0x672160 <rth>, handler=handler@entry=0x422c70 <accept_msg>, jarg=0x7ffff77a82a0 <_IO_2_1_stdout_>)
at libnetlink.c:761
.#7 0x00000000004233db in do_ipmonitor (argc=<optimized out>, argv=0x7fffffffe5a0) at ipmonitor.c:310
.#8 0x0000000000408f74 in do_cmd (argv0=0x7fffffffe7f5 “mon”, argc=3, argv=0x7fffffffe588) at ip.c:116
.#9 0x0000000000408a94 in main (argc=4, argv=0x7fffffffe580) at ip.c:311
Fixes: 6377572f ("ip: ip_print: add new API to print JSON or regular format output") Reported-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
Daniel Borkmann [Thu, 21 Sep 2017 08:42:29 +0000 (10:42 +0200)]
bpf: properly output json for xdp
After merging net-next branch into master, Stephen asked
to fix up json dump for XDP. Thus, rework the json dump a
bit, such that 'ip -json l' looks as below.
Daniel Borkmann [Thu, 21 Sep 2017 08:42:28 +0000 (10:42 +0200)]
json: move json printer to common library
Move the json printer which is based on json writer into the
iproute2 library, so it can be used by library code and tools
other than ip. Should probably have been done from the beginning
like that given json writer is in the library already anyway.
No functional changes.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Julien Fortin <julien@cumulusnetworks.com>
Benjamin LaHaise [Tue, 12 Sep 2017 14:06:15 +0000 (16:06 +0200)]
tc: flower: support for matching MPLS labels
This patch adds support to the iproute2 tc filter command for matching MPLS
labels in the flower classifier. The ability to match the Time To Live,
Bottom Of Stack, Traffic Control and Label fields are added as options to
the flower filter.
Signed-off-by: Benjamin LaHaise <benjamin.lahaise@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Phil Sutter [Tue, 12 Sep 2017 14:58:12 +0000 (16:58 +0200)]
ipaddress: Fix segfault in 'addr showdump'
Obviously, 'addr showdump' feature wasn't adjusted to json output
support. As a consequence, calls to print_string() in print_addrinfo()
tried to dereference a NULL FILE pointer.
Fixes: d0e720111aad2 ("ip: ipaddress.c: add support for json output") Signed-off-by: Phil Sutter <phil@nwl.cc>
devlink: Add support for special format protocol headers
In case of global header (protocol header), the header:field ids are used
to perform lookup for special format printer. In case no printer existence
fallback to plain value printing.
This patch decouples the match/action parsing from printing. This is
done as a preparation for adding the ability to print global header
values, for example print IPv4 address, which require special formatting.
Phil Sutter [Wed, 6 Sep 2017 16:51:42 +0000 (18:51 +0200)]
utils: strlcpy() and strlcat() don't clobber dst
As David Laight correctly pointed out, the first version of strlcpy()
modified dst buffer behind the string copied into it. Fix this by
writing NUL to the byte immediately following src string instead of to
the last byte in dst. Doing so also allows to reduce overhead by using
memcpy().
Improve strlcat() by avoiding the call to strlcpy() if dst string is
already full, not just as sanity check.
Daniel Borkmann [Tue, 5 Sep 2017 00:24:32 +0000 (02:24 +0200)]
bpf: consolidate dumps to use bpf_dump_prog_info
Consolidate dump of prog info to use bpf_dump_prog_info() when possible.
Moving forward, we want to have a consistent output for BPF progs when
being dumped. E.g. in cls/act case we used to dump tag as a separate
netlink attribute before we had BPF_OBJ_GET_INFO_BY_FD bpf(2) command.
Move dumping tag into bpf_dump_prog_info() as well, and only dump the
netlink attribute for older kernels. Also, reuse bpf_dump_prog_info()
for XDP case, so we can dump tag and whether program was jited, which
we currently don't show.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Simon Horman [Tue, 5 Sep 2017 11:06:24 +0000 (13:06 +0200)]
tc actions: store and dump correct length of user cookies
Correct two errors which cancel each other out:
* Do not send twice the length of the actual provided by the user to the kernel
* Do not dump half the length of the cookie provided by the kernel
As the cookie is now stored in the kernel at its correct length rather
than double the that length cookies of up to the maximum size of 16 bytes
may now be stored rather than a maximum of half that length.
Output of dump is the same before and after this change,
but the data stored in the kernel is now exactly the cookie
rather than the cookie + as many trailing zeros.
Before:
# tc filter add dev eth0 protocol ip parent ffff: \
flower ip_proto udp action drop \
cookie 0123456789abcdef0123456789abcdef
RTNETLINK answers: Invalid argument
After:
# tc filter add dev eth0 protocol ip parent ffff: \
flower ip_proto udp action drop \
cookie 0123456789abcdef0123456789abcdef
# tc filter show dev eth0 ingress
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 1 sec used 1 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie len 16 0123456789abcdef0123456789abcdef
Fixes: fd8b3d2c1b9b ("actions: Add support for user cookies") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Simon Horman <simon.horman@netronome.com>
Phil Sutter [Tue, 29 Aug 2017 15:09:45 +0000 (17:09 +0200)]
lib/bpf: Fix bytecode-file parsing
The signedness of char type is implementation dependent, and there are
architectures on which it is unsigned by default. In that case, the
check whether fgetc() returned EOF failed because the return value was
assigned an (unsigned) char variable prior to comparison with EOF (which
is defined to -1). Fix this by using int as type for 'c' variable, which
also matches the declaration of fgetc().
While being at it, fix the parser logic to correctly handle multiple
empty lines and consecutive whitespace and tab characters to further
improve the parser's robustness. Note that this will still detect double
separator characters, so doesn't soften up the parser too much.
Fixes: 3da3ebfca85b8 ("bpf: Make bytecode-file reading a little more robust") Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Michal Kubecek [Fri, 1 Sep 2017 16:39:16 +0000 (18:39 +0200)]
iplink: double the buffer size also in iplink_get()
Commit 72b365e8e0fd ("libnetlink: Double the dump buffer size") increased
the buffer size for "ip link show" command to 32 KB to handle NICs with
large number of VFs. With "dev" filter, a different code path is taken and
iplink_get() still uses only 16 KB buffer.
The size of 32768 is not very future-proof as NICs supporting 120-128 VFs
are already in use so that single RTM_NEWLINK message in the dump can
exceed 30000 bytes. But it's what rtnl_talk() and rtnl_dump_filter_l() use
so let's be consistent. Once this proves insufficient, all three sizes
should be increased.
Michal Kubecek [Fri, 1 Sep 2017 16:39:11 +0000 (18:39 +0200)]
iplink: check for message truncation in iplink_get()
If message length exceeds maxlen argument of rtnl_talk(), it is truncated
to maxlen but unlike in the case of truncation to the length of local
buffer in rtnl_talk(), the caller doesn't get any indication of a problem.
In particular, iplink_get() passes the truncated message on and parsing it
results in various warnings and sometimes even a segfault (observed with
"ip link show dev ..." for a NIC with 125 VFs).
Handle message truncation in iplink_get() the same way as truncation in
rtnl_talk() would be handled: return an error.
projects / mirror_iproute2.git / log